dt-bindings: Add missing 'additionalProperties: false'
Setting 'additionalProperties: false' is frequently omitted, but is
important in order to check that there aren't extra undocumented
properties in a binding.
Ideally, we'd just add this automatically and make this the default, but
there's some cases where it doesn't work. For example, if a common
schema is referenced, then properties in the common schema aren't part
of what's considered for 'additionalProperties'. Also, sometimes there
are bus specific properties such as 'spi-max-frequency' that go into
bus child nodes, but aren't defined in the child node's schema.
So let's stick with the json-schema defined default and add
'additionalProperties: false' where needed. This will be a continual
review comment and game of wack-a-mole.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Stephen Boyd <sboyd@kernel.org> # clock
Acked-by: Lee Jones <lee.jones@linaro.org>
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
index e4131fa..5723813 100644
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-clk-manager.yaml
@@ -21,6 +21,8 @@
required:
- compatible
+additionalProperties: false
+
examples:
- |
clkmgr@ffd04000 {
diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
index 853d7d2..66213bd 100644
--- a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
@@ -43,6 +43,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
ao-secure@140 {
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
index 79902f4..c3a8604 100644
--- a/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,llcc.yaml
@@ -43,6 +43,8 @@
- reg-names
- interrupts
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/Documentation/devicetree/bindings/arm/renesas,prr.yaml b/Documentation/devicetree/bindings/arm/renesas,prr.yaml
index 7f8d17f..dd08764 100644
--- a/Documentation/devicetree/bindings/arm/renesas,prr.yaml
+++ b/Documentation/devicetree/bindings/arm/renesas,prr.yaml
@@ -27,6 +27,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
prr: chipid@ff000044 {
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
index afcd708..0425d33 100644
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-chipid.yaml
@@ -30,6 +30,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
chipid@10000000 {
diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
index 73b56fc..c965189 100644
--- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
@@ -89,6 +89,8 @@
- clock-names
- clocks
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/exynos5250.h>
diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml
index 51d23b6..3d9abad 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-secure-firmware.yaml
@@ -23,6 +23,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
firmware@203f000 {
diff --git a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
index 0dedf94..baff801 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,stm32-syscon.yaml
@@ -29,6 +29,8 @@
- reg
- clocks
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/stm32mp1-clks.h>
diff --git a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
index d1c0402..a203d5d 100644
--- a/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
+++ b/Documentation/devicetree/bindings/clock/fsl,plldig.yaml
@@ -44,6 +44,8 @@
- clocks
- '#clock-cells'
+additionalProperties: false
+
examples:
# Display PIXEL Clock node:
- |
diff --git a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
index cd0b8a3..03386b0 100644
--- a/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8mn-clock.yaml
@@ -52,6 +52,8 @@
- clock-names
- '#clock-cells'
+additionalProperties: false
+
examples:
# Clock Control Module node:
- |
diff --git a/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml b/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
index 89aee63..4351a1d 100644
--- a/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx8mp-clock.yaml
@@ -52,6 +52,8 @@
- clock-names
- '#clock-cells'
+additionalProperties: false
+
examples:
# Clock Control Module node:
- |
diff --git a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
index f0b804a7..0e8b077 100644
--- a/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml
@@ -35,6 +35,8 @@
- clocks
- '#clock-cells'
+additionalProperties: false
+
examples:
# Clock controller node:
- |
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
index 3647007..eacccc8 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
@@ -68,6 +68,8 @@
- nvmem-cell-names
- '#thermal-sensor-cells'
+additionalProperties: false
+
examples:
- |
clock-controller@900000 {
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
index 89c6e07..98572b4 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml
@@ -40,6 +40,8 @@
- '#clock-cells'
- '#reset-cells'
+additionalProperties: false
+
examples:
- |
clock-controller@1800000 {
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
index 18e4e77..5a5b221 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8996.yaml
@@ -56,6 +56,8 @@
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
- |
clock-controller@300000 {
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
index 1d3cae9..a0bb713 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-msm8998.yaml
@@ -66,6 +66,8 @@
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,rpmcc.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
index 8cdece3..ce06f3f 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-qcs404.yaml
@@ -40,6 +40,8 @@
- '#clock-cells'
- '#reset-cells'
+additionalProperties: false
+
examples:
- |
clock-controller@1800000 {
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
index ee4f968..a345320 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc7180.yaml
@@ -58,6 +58,8 @@
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,rpmh.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
index 888e9a7..36f3b36 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sm8150.yaml
@@ -56,6 +56,8 @@
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,rpmh.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
index d18f8ab..e533bb0 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
@@ -74,6 +74,8 @@
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
# Example for GCC for MSM8960:
- |
diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
index 8551849..f684fe6 100644
--- a/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.yaml
@@ -74,6 +74,8 @@
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
if:
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
index 7d853c1..d747bb5 100644
--- a/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,msm8998-gpucc.yaml
@@ -50,6 +50,8 @@
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,gcc-msm8998.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
index 2cd158f1..c9fd748 100644
--- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml
@@ -35,6 +35,8 @@
- compatible
- '#clock-cells'
+additionalProperties: false
+
examples:
# Example for GCC for SDM845: The below node should be defined inside
# &apps_rsc node.
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
index 0429062..58cdfd59 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-dispcc.yaml
@@ -58,6 +58,8 @@
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,gcc-sc7180.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
index 5785192..8635e35 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-gpucc.yaml
@@ -52,6 +52,8 @@
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,gcc-sc7180.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
index 31df901..0071b97 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-videocc.yaml
@@ -48,6 +48,8 @@
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,rpmh.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
index 89269dd..ad47d74 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-dispcc.yaml
@@ -67,6 +67,8 @@
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
index bac04f1..7a052ac 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-gpucc.yaml
@@ -52,6 +52,8 @@
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
index 9d216c0..2a6a81a 100644
--- a/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-videocc.yaml
@@ -48,6 +48,8 @@
- '#reset-cells'
- '#power-domain-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/qcom,rpmh.h>
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
index d1205a6..d8e573e 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -107,6 +107,8 @@
- "#address-cells"
- "#size-cells"
+additionalProperties: false
+
examples:
- |
vpu: vpu@d0100000 {
diff --git a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
index 2ca3ddb..e7f2ad7 100644
--- a/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
+++ b/Documentation/devicetree/bindings/dma/sifive,fu540-c000-pdma.yaml
@@ -43,6 +43,8 @@
- interrupts
- '#dma-cells'
+additionalProperties: false
+
examples:
- |
dma@3000000 {
diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
index f04870d..a5dc070 100644
--- a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
+++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
@@ -68,6 +68,8 @@
- mbox-names
- memory-region
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/firmware/imx/rsrc.h>
diff --git a/Documentation/devicetree/bindings/eeprom/at24.yaml b/Documentation/devicetree/bindings/eeprom/at24.yaml
index 0f6d8db..a15787e 100644
--- a/Documentation/devicetree/bindings/eeprom/at24.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at24.yaml
@@ -172,6 +172,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
i2c {
diff --git a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
index 878a207..1bd2870 100644
--- a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
+++ b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
@@ -34,9 +34,12 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
npe@c8006000 {
compatible = "intel,ixp4xx-network-processing-engine";
reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
};
+...
diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
index 64e279a..5f1ed20e 100644
--- a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
@@ -47,6 +47,8 @@
- "#gpio-cells"
- gpio-controller
+additionalProperties: false
+
dependencies:
interrupt-controller: [ interrupts ]
diff --git a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
index d102888..a36aec2 100644
--- a/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/xylon,logicvc-gpio.yaml
@@ -49,6 +49,8 @@
- "#gpio-cells"
- gpio-controller
+additionalProperties: false
+
examples:
- |
logicvc: logicvc@43c00000 {
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
index 05fd9a4..0b229a7 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -53,6 +53,8 @@
- interrupt-names
- clocks
+additionalProperties: false
+
allOf:
- if:
properties:
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
index 6819cde..0407e45 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
@@ -94,6 +94,8 @@
- interrupt-names
- clocks
+additionalProperties: false
+
allOf:
- if:
properties:
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
index afde81b..f5401cc 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.yaml
@@ -115,6 +115,8 @@
- clocks
- clock-names
+additionalProperties: false
+
allOf:
- if:
properties:
diff --git a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
index f4dfa6f..665c6e3 100644
--- a/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
+++ b/Documentation/devicetree/bindings/gpu/samsung-rotator.yaml
@@ -36,6 +36,8 @@
- clocks
- clock-names
+additionalProperties: false
+
examples:
- |
rotator@12810000 {
diff --git a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
index 2a98220..154bee8 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,adm1177.yaml
@@ -47,6 +47,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
index 6a742a5..44a63ff 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
@@ -87,6 +87,8 @@
- reg
+additionalProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
index 5d42e13..e8feee3 100644
--- a/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
+++ b/Documentation/devicetree/bindings/hwmon/pmbus/ti,ucd90320.yaml
@@ -32,6 +32,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
i2c {
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
index 168235a..3f043e9 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
@@ -76,6 +76,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
i2c {
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
index c1c6d6f..8723a33 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
@@ -36,6 +36,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
index 9acde6d..a67ba67 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
@@ -67,6 +67,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
index 91ab9c8..77605f1 100644
--- a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
@@ -53,6 +53,8 @@
- dout-gpios
- avdd-supply
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
index 5900999..118809a 100644
--- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
@@ -32,6 +32,8 @@
- vref-supply
- reg
+additionalProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
index 0ce2904..8ffeceb 100644
--- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
@@ -52,6 +52,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index acf36ee..b162744 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -69,6 +69,8 @@
- "#address-cells"
- "#size-cells"
+additionalProperties: false
+
patternProperties:
"^filter@[0-9]+$":
type: object
diff --git a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
index 19e5393..1fe5615 100644
--- a/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
+++ b/Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
@@ -38,6 +38,8 @@
- compatible
- vcc-supply
+additionalProperties: false
+
examples:
- |
serial {
diff --git a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
index 50a50a0..a93d197 100644
--- a/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
+++ b/Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
@@ -24,6 +24,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
i2c {
diff --git a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
index a285eab..e51a585 100644
--- a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
@@ -34,6 +34,8 @@
- reg
- vref-supply
+additionalProperties: false
+
examples:
- |
spi {
diff --git a/Documentation/devicetree/bindings/iio/light/adux1020.yaml b/Documentation/devicetree/bindings/iio/light/adux1020.yaml
index 69bd5c0..d7d14f2 100644
--- a/Documentation/devicetree/bindings/iio/light/adux1020.yaml
+++ b/Documentation/devicetree/bindings/iio/light/adux1020.yaml
@@ -28,6 +28,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/light/bh1750.yaml b/Documentation/devicetree/bindings/iio/light/bh1750.yaml
index 1cc60d7..1a88b3c 100644
--- a/Documentation/devicetree/bindings/iio/light/bh1750.yaml
+++ b/Documentation/devicetree/bindings/iio/light/bh1750.yaml
@@ -28,6 +28,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
i2c {
diff --git a/Documentation/devicetree/bindings/iio/light/isl29018.yaml b/Documentation/devicetree/bindings/iio/light/isl29018.yaml
index cbb00be..0ea278b 100644
--- a/Documentation/devicetree/bindings/iio/light/isl29018.yaml
+++ b/Documentation/devicetree/bindings/iio/light/isl29018.yaml
@@ -38,6 +38,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/light/noa1305.yaml b/Documentation/devicetree/bindings/iio/light/noa1305.yaml
index 17e7f14..fe7bfe1 100644
--- a/Documentation/devicetree/bindings/iio/light/noa1305.yaml
+++ b/Documentation/devicetree/bindings/iio/light/noa1305.yaml
@@ -29,6 +29,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
i2c {
diff --git a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
index aae8a6d..f92bf7b 100644
--- a/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
+++ b/Documentation/devicetree/bindings/iio/light/stk33xx.yaml
@@ -30,6 +30,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
index e86ef64..7b92ba8 100644
--- a/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
+++ b/Documentation/devicetree/bindings/iio/light/tsl2583.yaml
@@ -32,6 +32,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
i2c {
diff --git a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
index ed2c3d5..e8f7d1a 100644
--- a/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
+++ b/Documentation/devicetree/bindings/iio/light/tsl2772.yaml
@@ -62,6 +62,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/light/veml6030.yaml b/Documentation/devicetree/bindings/iio/light/veml6030.yaml
index 0ff9b11..fb19a2d 100644
--- a/Documentation/devicetree/bindings/iio/light/veml6030.yaml
+++ b/Documentation/devicetree/bindings/iio/light/veml6030.yaml
@@ -45,6 +45,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
index 9f5ca9c..64c18f1 100644
--- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
@@ -33,6 +33,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
index 5d4aec0..49257f9 100644
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
@@ -52,6 +52,8 @@
- vddd-supply
- vdda-supply
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
index 4e80ea7..7ac5eb7 100644
--- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
@@ -56,6 +56,8 @@
- trig-gpios
- echo-gpios
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
index a079c99..ada55f1 100644
--- a/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/parallax-ping.yaml
@@ -42,6 +42,8 @@
- compatible
- ping-gpios
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
index d4922f9..acc030c1 100644
--- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
@@ -398,6 +398,8 @@
- reg
- interrupts
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
index b98bf93..2384465 100644
--- a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml
@@ -26,6 +26,8 @@
- compatible
- enable-gpios
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/input/max77650-onkey.yaml b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
index 2f2e0b6..3a2ad6e 100644
--- a/Documentation/devicetree/bindings/input/max77650-onkey.yaml
+++ b/Documentation/devicetree/bindings/input/max77650-onkey.yaml
@@ -33,3 +33,6 @@
required:
- compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
index 507c141..ccc507f 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/intel,ixp4xx-interrupt.yaml
@@ -44,6 +44,8 @@
- interrupt-controller
- '#interrupt-cells'
+additionalProperties: false
+
examples:
- |
intcon: interrupt-controller@c8003000 {
diff --git a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
index 7cdd3aa..0e33cd9 100644
--- a/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/samsung,sysmmu.yaml
@@ -80,6 +80,8 @@
- clock-names
- "#iommu-cells"
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/exynos5250.h>
diff --git a/Documentation/devicetree/bindings/leds/leds-max77650.yaml b/Documentation/devicetree/bindings/leds/leds-max77650.yaml
index 8c43f1e..c6f96ca 100644
--- a/Documentation/devicetree/bindings/leds/leds-max77650.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-max77650.yaml
@@ -49,3 +49,6 @@
- compatible
- "#address-cells"
- "#size-cells"
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
index b50f4bc..90edf9d 100644
--- a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
+++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
@@ -50,3 +50,6 @@
required:
- compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
index 3192805..aa2b3bf 100644
--- a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
+++ b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
@@ -41,6 +41,8 @@
- interrupts
- "#mbox-cells"
+additionalProperties: false
+
examples:
- |
mailbox@c883c404 {
diff --git a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
index 335717e..37d77e0 100644
--- a/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
+++ b/Documentation/devicetree/bindings/media/amlogic,gx-vdec.yaml
@@ -124,6 +124,8 @@
- amlogic,ao-sysctrl
- amlogic,canvas
+additionalProperties: false
+
examples:
- |
vdec: video-decoder@c8820000 {
diff --git a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
index e8ce37f..95ffa8b 100644
--- a/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
+++ b/Documentation/devicetree/bindings/media/amlogic,meson-gx-ao-cec.yaml
@@ -82,6 +82,8 @@
- clocks
- clock-names
+additionalProperties: false
+
examples:
- |
cec_AO: cec@100 {
diff --git a/Documentation/devicetree/bindings/media/renesas,ceu.yaml b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
index 8e9251a..fcb5f13 100644
--- a/Documentation/devicetree/bindings/media/renesas,ceu.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,ceu.yaml
@@ -59,6 +59,8 @@
- interrupts
- port
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml
index 4803857..b0a0f0d 100644
--- a/Documentation/devicetree/bindings/mfd/max77650.yaml
+++ b/Documentation/devicetree/bindings/mfd/max77650.yaml
@@ -73,6 +73,8 @@
- gpio-controller
- "#gpio-cells"
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
index 38dc4f8..3a6a1a2 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
@@ -77,6 +77,8 @@
- gpio-controller
- "#gpio-cells"
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml
index 0ea21a6..38ab049 100644
--- a/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml
+++ b/Documentation/devicetree/bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml
@@ -38,6 +38,8 @@
- reg
- interrupts
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
index b9e9696..976f139 100644
--- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
@@ -167,6 +167,8 @@
- '#address-cells'
- '#size-cells'
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml
index e5922b4..c03b831 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun50i-h6-usb3-phy.yaml
@@ -34,6 +34,8 @@
- resets
- "#phy-cells"
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/sun50i-h6-ccu.h>
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
index 346f9c3..453c083 100644
--- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
@@ -44,6 +44,8 @@
- reset-names
- "#phy-cells"
+additionalProperties: false
+
examples:
- |
phy@46000 {
diff --git a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
index 0ccee64..9a346d6 100644
--- a/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/intel,lgm-emmc-phy.yaml
@@ -40,6 +40,8 @@
- reg
- clocks
+additionalProperties: false
+
examples:
- |
sysconf: chiptop@e0200000 {
diff --git a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
index 5ab4361..00609ac 100644
--- a/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/marvell,mmp3-hsic-phy.yaml
@@ -31,6 +31,8 @@
- reset-gpios
- "#phy-cells"
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
index 452cee1..fd1982c 100644
--- a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
+++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
@@ -159,6 +159,8 @@
- "#reset-cells"
- ranges
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/soc/ti,sci_pm_domain.h>
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
index 135c7df..7651a67 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml
@@ -57,6 +57,8 @@
required:
- compatible
+additionalProperties: false
+
examples:
- |
syscon: scu@1e6e2000 {
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
index 824f7fd1..36feaf5 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml
@@ -70,6 +70,8 @@
- compatible
- aspeed,external-nodes
+additionalProperties: false
+
examples:
- |
apb {
diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
index ac8d1c3..45af29bc 100644
--- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml
@@ -92,6 +92,8 @@
required:
- compatible
+additionalProperties: false
+
examples:
- |
syscon: scu@1e6e2000 {
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
index ef4de32..46a0478 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -194,6 +194,8 @@
- ranges
- pins-are-numbered
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/pinctrl/stm32-pinfunc.h>
diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
index d3098c9..6c6079f 100644
--- a/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
+++ b/Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml
@@ -68,6 +68,8 @@
- "#power-domain-cells"
- amlogic,ao-sysctrl
+additionalProperties: false
+
examples:
- |
pwrc: power-controller {
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
index 520e07e..3412fe7 100644
--- a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
+++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
@@ -41,6 +41,8 @@
- regmap
- offset
+additionalProperties: false
+
allOf:
- if:
not:
diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
index d38006b..b80772c 100644
--- a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
+++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml
@@ -41,6 +41,8 @@
- regmap
- offset
+additionalProperties: false
+
allOf:
- if:
not:
diff --git a/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
index deef010..62eeddb 100644
--- a/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
@@ -32,3 +32,6 @@
required:
- compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml b/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
index 9e21b83..239b49f 100644
--- a/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
+++ b/Documentation/devicetree/bindings/ptp/ptp-idtcm.yaml
@@ -55,6 +55,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
i2c@1 {
diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
index 5069048..ce0a402 100644
--- a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
@@ -29,3 +29,6 @@
required:
- compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
index b3f57d8..92922d3 100644
--- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
@@ -29,6 +29,8 @@
- reg
- "#reset-cells"
+additionalProperties: false
+
examples:
- |
reset-controller@c884404 {
diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
index 411bd76..512a33bd 100644
--- a/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
+++ b/Documentation/devicetree/bindings/reset/brcm,bcm7216-pcie-sata-rescal.yaml
@@ -28,6 +28,8 @@
- reg
- "#reset-cells"
+additionalProperties: false
+
examples:
- |
reset-controller@8b2c800 {
diff --git a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
index a9ff3cb..444be32 100644
--- a/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
+++ b/Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
@@ -29,6 +29,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
rng@c8834000 {
diff --git a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
index 42d9a38..89ab67f 100644
--- a/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
+++ b/Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml
@@ -35,6 +35,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
rng {
diff --git a/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
index dcff573..b95cb01 100644
--- a/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/renesas,sh-rtc.yaml
@@ -51,6 +51,8 @@
- clocks
- clock-names
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/r7s72100-clock.h>
diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
index 0a54296..48c6caf 100644
--- a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.yaml
@@ -111,6 +111,8 @@
- clocks
- interrupts
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/mfd/stm32f4-rcc.h>
diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
index 214fe8b..d4178ab 100644
--- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
@@ -62,6 +62,8 @@
- clocks
- clock-names
+additionalProperties: false
+
examples:
- |
serial@84c0 {
diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
index f548594..cb008fd 100644
--- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
+++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.yaml
@@ -40,6 +40,8 @@
- compatible
- reg
+additionalProperties: false
+
examples:
- |
canvas: video-lut@48 {
diff --git a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
index 75e0cbe..76ee695 100644
--- a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
+++ b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
@@ -59,6 +59,8 @@
- iovdd-supply
- dvdd-supply
+additionalProperties: false
+
examples:
- |
i2c {
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
index 38eaf0c..a495d5f 100644
--- a/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
@@ -139,6 +139,8 @@
- "#address-cells"
- "#size-cells"
+additionalProperties: false
+
examples:
- |
codec@1,0{
diff --git a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
index 140a37f..d1b6555 100644
--- a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
+++ b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
@@ -63,6 +63,8 @@
- reg
- interrupts
+additionalProperties: false
+
examples:
- |
sh_fsi2: sound@ec230000 {
diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
index c6b2443..8ff2d39 100644
--- a/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung,odroid.yaml
@@ -69,6 +69,8 @@
- cpu
- codec
+additionalProperties: false
+
examples:
- |
sound {
diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
index 53e3bad..b2ad093 100644
--- a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml
@@ -115,6 +115,8 @@
- clocks
- clock-names
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/clock/exynos-audss-clk.h>
diff --git a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
index 469cec1..930188b 100644
--- a/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
+++ b/Documentation/devicetree/bindings/sram/qcom,ocmem.yaml
@@ -56,6 +56,8 @@
- '#size-cells'
- ranges
+additionalProperties: false
+
patternProperties:
"-sram@[0-9a-f]+$":
type: object
diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
index 93fe7b1..e43ec50 100644
--- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
@@ -42,6 +42,8 @@
- clocks
- amlogic,ao-secure
+additionalProperties: false
+
examples:
- |
cpu_temp: temperature-sensor@ff634800 {
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
index 6deead07..fa25567 100644
--- a/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer.yaml
@@ -82,6 +82,8 @@
required:
- compatible
+additionalProperties: false
+
oneOf:
- required:
- interrupts
diff --git a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
index f7ef664..582bbef 100644
--- a/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
@@ -95,6 +95,8 @@
- '#address-cells'
- '#size-cells'
+additionalProperties: false
+
examples:
- |
timer@f0000000 {
diff --git a/Documentation/devicetree/bindings/timer/arm,global_timer.yaml b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
index 21c24a8..4956c8f 100644
--- a/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
+++ b/Documentation/devicetree/bindings/timer/arm,global_timer.yaml
@@ -35,6 +35,8 @@
- reg
- clocks
+additionalProperties: false
+
examples:
- |
timer@2c000600 {
diff --git a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
index 2807225..1a721d8 100644
--- a/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/intel,ixp4xx-timer.yaml
@@ -32,6 +32,8 @@
- reg
- interrupts
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
index 273e359..37bd01a 100644
--- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
+++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml
@@ -52,6 +52,8 @@
- interrupts
- reg
+additionalProperties: false
+
examples:
- |
// In this example, the IP contains two local timers, using separate
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 51d1f6e..bcae5f9 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -369,4 +369,6 @@
- compatible
- reg
+additionalProperties: false
+
...
