Merge tag 'vexpress-for-v4.6/dt-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt
Few updates for ARM VExpress/Juno platforms
1. GICv3 support on Foundation models
2. Support for Juno R2 board
3. Support for ARM HDLCD on all Juno platforms
* tag 'vexpress-for-v4.6/dt-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: Add HDLCD support on Juno platforms
Documentation: drm: Add DT bindings for ARM HDLCD
arm64: dts: Add support for Juno r2 board
arm64: dts: move juno pcie-controller to base file
arm64: dts: add .dts for GICv3 Foundation model
arm64: dts: split Foundation model dts to put the GIC separately
arm64: dts: Foundation model: increase GICC region to allow EOImode=1
arm64: dts: prepare foundation-v8.dts to cope with GICv3
Signed-off-by: Olof Johansson <olof@lixom.net>
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
index 1a70997..70601a5 100644
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ b/Documentation/devicetree/bindings/arm/arm-boards
@@ -180,6 +180,7 @@
Required properties (in root node):
compatible = "arm,juno"; /* For Juno r0 board */
compatible = "arm,juno-r1"; /* For Juno r1 board */
+ compatible = "arm,juno-r2"; /* For Juno r2 board */
Required nodes:
The description for the board must include:
diff --git a/Documentation/devicetree/bindings/display/arm,hdlcd.txt b/Documentation/devicetree/bindings/display/arm,hdlcd.txt
new file mode 100644
index 0000000..78bc242
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,hdlcd.txt
@@ -0,0 +1,79 @@
+ARM HDLCD
+
+This is a display controller found on several development platforms produced
+by ARM Ltd and in more modern of its' Fast Models. The HDLCD is an RGB
+streamer that reads the data from a framebuffer and sends it to a single
+digital encoder (DVI or HDMI).
+
+Required properties:
+ - compatible: "arm,hdlcd"
+ - reg: Physical base address and length of the controller's registers.
+ - interrupts: One interrupt used by the display controller to notify the
+ interrupt controller when any of the interrupt sources programmed in
+ the interrupt mask register have activated.
+ - clocks: A list of phandle + clock-specifier pairs, one for each
+ entry in 'clock-names'.
+ - clock-names: A list of clock names. For HDLCD it should contain:
+ - "pxlclk" for the clock feeding the output PLL of the controller.
+
+Required sub-nodes:
+ - port: The HDLCD connection to an encoder chip. The connection is modeled
+ using the OF graph bindings specified in
+ Documentation/devicetree/bindings/graph.txt.
+
+Optional properties:
+ - memory-region: phandle to a node describing memory (see
+ Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) to be
+ used for the framebuffer; if not present, the framebuffer may be located
+ anywhere in memory.
+
+
+Example:
+
+/ {
+ ...
+
+ hdlcd@2b000000 {
+ compatible = "arm,hdlcd";
+ reg = <0 0x2b000000 0 0x1000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&oscclk5>;
+ clock-names = "pxlclk";
+ port {
+ hdlcd_output: endpoint@0 {
+ remote-endpoint = <&hdmi_enc_input>;
+ };
+ };
+ };
+
+ /* HDMI encoder on I2C bus */
+ i2c@7ffa0000 {
+ ....
+ hdmi-transmitter@70 {
+ compatible = ".....";
+ reg = <0x70>;
+ port@0 {
+ hdmi_enc_input: endpoint {
+ remote-endpoint = <&hdlcd_output>;
+ };
+
+ hdmi_enc_output: endpoint {
+ remote-endpoint = <&hdmi_1_port>;
+ };
+ };
+ };
+
+ };
+
+ hdmi1: connector@1 {
+ compatible = "hdmi-connector";
+ type = "a";
+ port {
+ hdmi_1_port: endpoint {
+ remote-endpoint = <&hdmi_enc_output>;
+ };
+ };
+ };
+
+ ...
+};
diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile
index bb3c072..75cc2aa 100644
--- a/arch/arm64/boot/dts/arm/Makefile
+++ b/arch/arm64/boot/dts/arm/Makefile
@@ -1,5 +1,5 @@
-dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb
-dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb foundation-v8-gicv3.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb juno-r2.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb
diff --git a/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts
new file mode 100644
index 0000000..35588df
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/foundation-v8-gicv3.dts
@@ -0,0 +1,30 @@
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS (GICv3 configuration)
+ */
+
+#include "foundation-v8.dtsi"
+
+/ {
+ gic: interrupt-controller@2f000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+ reg = <0x0 0x2f000000 0x0 0x10000>,
+ <0x0 0x2f100000 0x0 0x200000>,
+ <0x0 0x2c000000 0x0 0x2000>,
+ <0x0 0x2c010000 0x0 0x2000>,
+ <0x0 0x2c02f000 0x0 0x2000>;
+ interrupts = <1 9 4>;
+
+ its: its@2f020000 {
+ compatible = "arm,gic-v3-its";
+ msi-controller;
+ reg = <0x0 0x2f020000 0x0 0x20000>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dts b/arch/arm64/boot/dts/arm/foundation-v8.dts
index 4eac8dc..7116807 100644
--- a/arch/arm64/boot/dts/arm/foundation-v8.dts
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dts
@@ -1,240 +1,21 @@
/*
* ARM Ltd.
*
- * ARMv8 Foundation model DTS
+ * ARMv8 Foundation model DTS (GICv2 configuration)
*/
-/dts-v1/;
-
-/memreserve/ 0x80000000 0x00010000;
+#include "foundation-v8.dtsi"
/ {
- model = "Foundation-v8A";
- compatible = "arm,foundation-aarch64", "arm,vexpress";
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- chosen { };
-
- aliases {
- serial0 = &v2m_serial0;
- serial1 = &v2m_serial1;
- serial2 = &v2m_serial2;
- serial3 = &v2m_serial3;
- };
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "arm,armv8";
- reg = <0x0 0x0>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
- next-level-cache = <&L2_0>;
- };
- cpu@1 {
- device_type = "cpu";
- compatible = "arm,armv8";
- reg = <0x0 0x1>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
- next-level-cache = <&L2_0>;
- };
- cpu@2 {
- device_type = "cpu";
- compatible = "arm,armv8";
- reg = <0x0 0x2>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
- next-level-cache = <&L2_0>;
- };
- cpu@3 {
- device_type = "cpu";
- compatible = "arm,armv8";
- reg = <0x0 0x3>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
- next-level-cache = <&L2_0>;
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- memory@80000000 {
- device_type = "memory";
- reg = <0x00000000 0x80000000 0 0x80000000>,
- <0x00000008 0x80000000 0 0x80000000>;
- };
-
gic: interrupt-controller@2c001000 {
compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
#interrupt-cells = <3>;
- #address-cells = <0>;
+ #address-cells = <2>;
interrupt-controller;
reg = <0x0 0x2c001000 0 0x1000>,
- <0x0 0x2c002000 0 0x1000>,
+ <0x0 0x2c002000 0 0x2000>,
<0x0 0x2c004000 0 0x2000>,
<0x0 0x2c006000 0 0x2000>;
interrupts = <1 9 0xf04>;
};
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <1 13 0xf08>,
- <1 14 0xf08>,
- <1 11 0xf08>,
- <1 10 0xf08>;
- clock-frequency = <100000000>;
- };
-
- pmu {
- compatible = "arm,armv8-pmuv3";
- interrupts = <0 60 4>,
- <0 61 4>,
- <0 62 4>,
- <0 63 4>;
- };
-
- smb {
- compatible = "arm,vexpress,v2m-p1", "simple-bus";
- arm,v2m-memory-map = "rs1";
- #address-cells = <2>; /* SMB chipselect number and offset */
- #size-cells = <1>;
-
- ranges = <0 0 0 0x08000000 0x04000000>,
- <1 0 0 0x14000000 0x04000000>,
- <2 0 0 0x18000000 0x04000000>,
- <3 0 0 0x1c000000 0x04000000>,
- <4 0 0 0x0c000000 0x04000000>,
- <5 0 0 0x10000000 0x04000000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 63>;
- interrupt-map = <0 0 0 &gic 0 0 4>,
- <0 0 1 &gic 0 1 4>,
- <0 0 2 &gic 0 2 4>,
- <0 0 3 &gic 0 3 4>,
- <0 0 4 &gic 0 4 4>,
- <0 0 5 &gic 0 5 4>,
- <0 0 6 &gic 0 6 4>,
- <0 0 7 &gic 0 7 4>,
- <0 0 8 &gic 0 8 4>,
- <0 0 9 &gic 0 9 4>,
- <0 0 10 &gic 0 10 4>,
- <0 0 11 &gic 0 11 4>,
- <0 0 12 &gic 0 12 4>,
- <0 0 13 &gic 0 13 4>,
- <0 0 14 &gic 0 14 4>,
- <0 0 15 &gic 0 15 4>,
- <0 0 16 &gic 0 16 4>,
- <0 0 17 &gic 0 17 4>,
- <0 0 18 &gic 0 18 4>,
- <0 0 19 &gic 0 19 4>,
- <0 0 20 &gic 0 20 4>,
- <0 0 21 &gic 0 21 4>,
- <0 0 22 &gic 0 22 4>,
- <0 0 23 &gic 0 23 4>,
- <0 0 24 &gic 0 24 4>,
- <0 0 25 &gic 0 25 4>,
- <0 0 26 &gic 0 26 4>,
- <0 0 27 &gic 0 27 4>,
- <0 0 28 &gic 0 28 4>,
- <0 0 29 &gic 0 29 4>,
- <0 0 30 &gic 0 30 4>,
- <0 0 31 &gic 0 31 4>,
- <0 0 32 &gic 0 32 4>,
- <0 0 33 &gic 0 33 4>,
- <0 0 34 &gic 0 34 4>,
- <0 0 35 &gic 0 35 4>,
- <0 0 36 &gic 0 36 4>,
- <0 0 37 &gic 0 37 4>,
- <0 0 38 &gic 0 38 4>,
- <0 0 39 &gic 0 39 4>,
- <0 0 40 &gic 0 40 4>,
- <0 0 41 &gic 0 41 4>,
- <0 0 42 &gic 0 42 4>;
-
- ethernet@2,02000000 {
- compatible = "smsc,lan91c111";
- reg = <2 0x02000000 0x10000>;
- interrupts = <15>;
- };
-
- v2m_clk24mhz: clk24mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "v2m:clk24mhz";
- };
-
- v2m_refclk1mhz: refclk1mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <1000000>;
- clock-output-names = "v2m:refclk1mhz";
- };
-
- v2m_refclk32khz: refclk32khz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "v2m:refclk32khz";
- };
-
- iofpga@3,00000000 {
- compatible = "arm,amba-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 3 0 0x200000>;
-
- v2m_sysreg: sysreg@010000 {
- compatible = "arm,vexpress-sysreg";
- reg = <0x010000 0x1000>;
- };
-
- v2m_serial0: uart@090000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x090000 0x1000>;
- interrupts = <5>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- v2m_serial1: uart@0a0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0a0000 0x1000>;
- interrupts = <6>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- v2m_serial2: uart@0b0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0b0000 0x1000>;
- interrupts = <7>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- v2m_serial3: uart@0c0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0c0000 0x1000>;
- interrupts = <8>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- virtio_block@0130000 {
- compatible = "virtio,mmio";
- reg = <0x130000 0x200>;
- interrupts = <42>;
- };
- };
- };
};
diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dtsi b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
new file mode 100644
index 0000000..9314f39
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/foundation-v8.dtsi
@@ -0,0 +1,228 @@
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+ model = "Foundation-v8A";
+ compatible = "arm,foundation-aarch64", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ aliases {
+ serial0 = &v2m_serial0;
+ serial1 = &v2m_serial1;
+ serial2 = &v2m_serial2;
+ serial3 = &v2m_serial3;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
+ };
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
+ };
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ next-level-cache = <&L2_0>;
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x80000000>,
+ <0x00000008 0x80000000 0 0x80000000>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ clock-frequency = <100000000>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <0 60 4>,
+ <0 61 4>,
+ <0 62 4>,
+ <0 63 4>;
+ };
+
+ smb {
+ compatible = "arm,vexpress,v2m-p1", "simple-bus";
+ arm,v2m-memory-map = "rs1";
+ #address-cells = <2>; /* SMB chipselect number and offset */
+ #size-cells = <1>;
+
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 63>;
+ interrupt-map = <0 0 0 &gic 0 0 0 0 4>,
+ <0 0 1 &gic 0 0 0 1 4>,
+ <0 0 2 &gic 0 0 0 2 4>,
+ <0 0 3 &gic 0 0 0 3 4>,
+ <0 0 4 &gic 0 0 0 4 4>,
+ <0 0 5 &gic 0 0 0 5 4>,
+ <0 0 6 &gic 0 0 0 6 4>,
+ <0 0 7 &gic 0 0 0 7 4>,
+ <0 0 8 &gic 0 0 0 8 4>,
+ <0 0 9 &gic 0 0 0 9 4>,
+ <0 0 10 &gic 0 0 0 10 4>,
+ <0 0 11 &gic 0 0 0 11 4>,
+ <0 0 12 &gic 0 0 0 12 4>,
+ <0 0 13 &gic 0 0 0 13 4>,
+ <0 0 14 &gic 0 0 0 14 4>,
+ <0 0 15 &gic 0 0 0 15 4>,
+ <0 0 16 &gic 0 0 0 16 4>,
+ <0 0 17 &gic 0 0 0 17 4>,
+ <0 0 18 &gic 0 0 0 18 4>,
+ <0 0 19 &gic 0 0 0 19 4>,
+ <0 0 20 &gic 0 0 0 20 4>,
+ <0 0 21 &gic 0 0 0 21 4>,
+ <0 0 22 &gic 0 0 0 22 4>,
+ <0 0 23 &gic 0 0 0 23 4>,
+ <0 0 24 &gic 0 0 0 24 4>,
+ <0 0 25 &gic 0 0 0 25 4>,
+ <0 0 26 &gic 0 0 0 26 4>,
+ <0 0 27 &gic 0 0 0 27 4>,
+ <0 0 28 &gic 0 0 0 28 4>,
+ <0 0 29 &gic 0 0 0 29 4>,
+ <0 0 30 &gic 0 0 0 30 4>,
+ <0 0 31 &gic 0 0 0 31 4>,
+ <0 0 32 &gic 0 0 0 32 4>,
+ <0 0 33 &gic 0 0 0 33 4>,
+ <0 0 34 &gic 0 0 0 34 4>,
+ <0 0 35 &gic 0 0 0 35 4>,
+ <0 0 36 &gic 0 0 0 36 4>,
+ <0 0 37 &gic 0 0 0 37 4>,
+ <0 0 38 &gic 0 0 0 38 4>,
+ <0 0 39 &gic 0 0 0 39 4>,
+ <0 0 40 &gic 0 0 0 40 4>,
+ <0 0 41 &gic 0 0 0 41 4>,
+ <0 0 42 &gic 0 0 0 42 4>;
+
+ ethernet@2,02000000 {
+ compatible = "smsc,lan91c111";
+ reg = <2 0x02000000 0x10000>;
+ interrupts = <15>;
+ };
+
+ v2m_clk24mhz: clk24mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "v2m:clk24mhz";
+ };
+
+ v2m_refclk1mhz: refclk1mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ clock-output-names = "v2m:refclk1mhz";
+ };
+
+ v2m_refclk32khz: refclk32khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "v2m:refclk32khz";
+ };
+
+ iofpga@3,00000000 {
+ compatible = "arm,amba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 3 0 0x200000>;
+
+ v2m_sysreg: sysreg@010000 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x010000 0x1000>;
+ };
+
+ v2m_serial0: uart@090000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x090000 0x1000>;
+ interrupts = <5>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial1: uart@0a0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0a0000 0x1000>;
+ interrupts = <6>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial2: uart@0b0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0b0000 0x1000>;
+ interrupts = <7>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial3: uart@0c0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0c0000 0x1000>;
+ interrupts = <8>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ virtio_block@0130000 {
+ compatible = "virtio,mmio";
+ reg = <0x130000 0x200>;
+ interrupts = <42>;
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index e5b59ca..4b6172b 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -75,6 +75,28 @@
};
};
+ pcie_ctlr: pcie-controller@40000000 {
+ compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic";
+ device_type = "pci";
+ reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */
+ bus-range = <0 255>;
+ linux,pci-domain = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ dma-coherent;
+ ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>,
+ <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>,
+ <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>,
+ <0 0 0 2 &gic 0 0 0 137 4>,
+ <0 0 0 3 &gic 0 0 0 138 4>,
+ <0 0 0 4 &gic 0 0 0 139 4>;
+ msi-parent = <&v2m_0>;
+ status = "disabled";
+ };
+
scpi {
compatible = "arm,scpi";
mboxes = <&mailbox 1>;
@@ -92,8 +114,8 @@
scpi_clk: scpi_clocks@3 {
compatible = "arm,scpi-variable-clocks";
#clock-cells = <1>;
- clock-indices = <3>, <4>;
- clock-output-names = "pxlclk0", "pxlclk1";
+ clock-indices = <3>;
+ clock-output-names = "pxlclk";
};
};
@@ -124,6 +146,34 @@
clock-names = "apb_pclk";
};
+ hdlcd@7ff50000 {
+ compatible = "arm,hdlcd";
+ reg = <0 0x7ff50000 0 0x1000>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scpi_clk 3>;
+ clock-names = "pxlclk";
+
+ port {
+ hdlcd1_output: endpoint@0 {
+ remote-endpoint = <&tda998x_1_input>;
+ };
+ };
+ };
+
+ hdlcd@7ff60000 {
+ compatible = "arm,hdlcd";
+ reg = <0 0x7ff60000 0 0x1000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scpi_clk 3>;
+ clock-names = "pxlclk";
+
+ port {
+ hdlcd0_output: endpoint@0 {
+ remote-endpoint = <&tda998x_0_input>;
+ };
+ };
+ };
+
soc_uart0: uart@7ff80000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0x7ff80000 0x0 0x1000>;
@@ -142,14 +192,24 @@
i2c-sda-hold-time-ns = <500>;
clocks = <&soc_smc50mhz>;
- dvi0: dvi-transmitter@70 {
+ hdmi-transmitter@70 {
compatible = "nxp,tda998x";
reg = <0x70>;
+ port {
+ tda998x_0_input: endpoint@0 {
+ remote-endpoint = <&hdlcd0_output>;
+ };
+ };
};
- dvi1: dvi-transmitter@71 {
+ hdmi-transmitter@71 {
compatible = "nxp,tda998x";
reg = <0x71>;
+ port {
+ tda998x_1_input: endpoint@0 {
+ remote-endpoint = <&hdlcd1_output>;
+ };
+ };
};
};
diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts
index 8826f834..d95d9e7 100644
--- a/arch/arm64/boot/dts/arm/juno-r1.dts
+++ b/arch/arm64/boot/dts/arm/juno-r1.dts
@@ -172,29 +172,12 @@
};
#include "juno-base.dtsi"
-
- pcie-controller@40000000 {
- compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic";
- device_type = "pci";
- reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */
- bus-range = <0 255>;
- linux,pci-domain = <0>;
- #address-cells = <3>;
- #size-cells = <2>;
- dma-coherent;
- ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>,
- <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>,
- <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>,
- <0 0 0 2 &gic 0 0 0 137 4>,
- <0 0 0 3 &gic 0 0 0 138 4>,
- <0 0 0 4 &gic 0 0 0 139 4>;
- msi-parent = <&v2m_0>;
- };
};
&memtimer {
status = "okay";
};
+
+&pcie_ctlr {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts
new file mode 100644
index 0000000..88ecd61
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-r2.dts
@@ -0,0 +1,183 @@
+/*
+ * ARM Ltd. Juno Platform
+ *
+ * Copyright (c) 2015 ARM Ltd.
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ model = "ARM Juno development board (r2)";
+ compatible = "arm,juno-r2", "arm,juno", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &soc_uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&A72_0>;
+ };
+ core1 {
+ cpu = <&A72_1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&A53_0>;
+ };
+ core1 {
+ cpu = <&A53_1>;
+ };
+ core2 {
+ cpu = <&A53_2>;
+ };
+ core3 {
+ cpu = <&A53_3>;
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "arm,psci";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ local-timer-stop;
+ entry-latency-us = <300>;
+ exit-latency-us = <1200>;
+ min-residency-us = <2000>;
+ };
+
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x1010000>;
+ local-timer-stop;
+ entry-latency-us = <300>;
+ exit-latency-us = <1200>;
+ min-residency-us = <2500>;
+ };
+ };
+
+ A72_0: cpu@0 {
+ compatible = "arm,cortex-a72","arm,armv8";
+ reg = <0x0 0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A72_L2>;
+ clocks = <&scpi_dvfs 0>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+
+ A72_1: cpu@1 {
+ compatible = "arm,cortex-a72","arm,armv8";
+ reg = <0x0 0x1>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A72_L2>;
+ clocks = <&scpi_dvfs 0>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+
+ A53_0: cpu@100 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+
+ A53_1: cpu@101 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x101>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+
+ A53_2: cpu@102 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x102>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+
+ A53_3: cpu@103 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x103>;
+ device_type = "cpu";
+ enable-method = "psci";
+ next-level-cache = <&A53_L2>;
+ clocks = <&scpi_dvfs 1>;
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+
+ A72_L2: l2-cache0 {
+ compatible = "cache";
+ };
+
+ A53_L2: l2-cache1 {
+ compatible = "cache";
+ };
+ };
+
+ pmu_a72 {
+ compatible = "arm,cortex-a72-pmu";
+ interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&A72_0>,
+ <&A72_1>;
+ };
+
+ pmu_a53 {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&A53_0>,
+ <&A53_1>,
+ <&A53_2>,
+ <&A53_3>;
+ };
+
+ #include "juno-base.dtsi"
+};
+
+&memtimer {
+ status = "okay";
+};
+
+&pcie_ctlr {
+ status = "okay";
+};
