drm/i915/adl_s: Configure DPLL for ADL-S
Add changes for configuring DPLL for ADL-S
- Reusing DG1 DPLL 2 & DPLL 3 for ADL-S
- Extend CNL macro to choose DPLL_ENABLE
for ADL-S.
- Select CFGCR0 and CFGCR1 for ADL-S plls.
On BSpec: 53720 PLL arrangement dig for adls:
DPLL2 cfgcr is programmed using _ADLS_DPLL3_CFGCR(0/1)
DPLL3 cfgcr is programmed using _ADLS_DPLL4_CFGCR(0/1)
v2 (Lucas): add missing update_ref_clks
Bspec: 50288
Bspec: 50289
Bspec: 49443
v3 : Adding another bit to HDPORT_DPLL_USED_MASK bitfield
for DPLL3_USED.(mdroper)
Bspec: 53707
v4: BSpec 53723 has been updated with note - DPLL2 is
controlled by DPLL4 CFGCR 0/1.(mdroper)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125140753.347998-6-aditya.swarup@intel.com
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 56ba8f1..191b897 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2930,7 +2930,7 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg)
#define MBUS_BBOX_CTL_S2 _MMIO(0x45044)
#define HDPORT_STATE _MMIO(0x45050)
-#define HDPORT_DPLL_USED_MASK REG_GENMASK(14, 12)
+#define HDPORT_DPLL_USED_MASK REG_GENMASK(15, 12)
#define HDPORT_DDI_USED(phy) REG_BIT(2 * (phy) + 1)
#define HDPORT_ENABLED REG_BIT(0)
@@ -10345,11 +10345,14 @@ enum skl_power_gate {
/* CNL PLL */
#define DPLL0_ENABLE 0x46010
#define DPLL1_ENABLE 0x46014
+#define _ADLS_DPLL2_ENABLE 0x46018
+#define _ADLS_DPLL3_ENABLE 0x46030
#define PLL_ENABLE (1 << 31)
#define PLL_LOCK (1 << 30)
#define PLL_POWER_ENABLE (1 << 27)
#define PLL_POWER_STATE (1 << 26)
-#define CNL_DPLL_ENABLE(pll) _MMIO_PLL(pll, DPLL0_ENABLE, DPLL1_ENABLE)
+#define CNL_DPLL_ENABLE(pll) _MMIO_PLL3(pll, DPLL0_ENABLE, DPLL1_ENABLE, \
+ _ADLS_DPLL2_ENABLE, _ADLS_DPLL3_ENABLE)
#define TBT_PLL_ENABLE _MMIO(0x46020)
@@ -10595,6 +10598,21 @@ enum skl_power_gate {
_DG1_DPLL2_CFGCR1, \
_DG1_DPLL3_CFGCR1)
+/* For ADL-S DPLL4_CFGCR0/1 are used to control DPLL2 */
+#define _ADLS_DPLL3_CFGCR0 0x1642C0
+#define _ADLS_DPLL4_CFGCR0 0x164294
+#define ADLS_DPLL_CFGCR0(pll) _MMIO_PLL3(pll, _TGL_DPLL0_CFGCR0, \
+ _TGL_DPLL1_CFGCR0, \
+ _ADLS_DPLL4_CFGCR0, \
+ _ADLS_DPLL3_CFGCR0)
+
+#define _ADLS_DPLL3_CFGCR1 0x1642C4
+#define _ADLS_DPLL4_CFGCR1 0x164298
+#define ADLS_DPLL_CFGCR1(pll) _MMIO_PLL3(pll, _TGL_DPLL0_CFGCR1, \
+ _TGL_DPLL1_CFGCR1, \
+ _ADLS_DPLL4_CFGCR1, \
+ _ADLS_DPLL3_CFGCR1)
+
#define _DKL_PHY1_BASE 0x168000
#define _DKL_PHY2_BASE 0x169000
#define _DKL_PHY3_BASE 0x16A000
