| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * RTC client/driver for the Maxim/Dallas DS3232/DS3234 Real-Time Clock |
| * |
| * Copyright (C) 2009-2011 Freescale Semiconductor. |
| * Author: Jack Lan <jack.lan@freescale.com> |
| * Copyright (C) 2008 MIMOMax Wireless Ltd. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/i2c.h> |
| #include <linux/spi/spi.h> |
| #include <linux/rtc.h> |
| #include <linux/bcd.h> |
| #include <linux/slab.h> |
| #include <linux/regmap.h> |
| #include <linux/hwmon.h> |
| |
| #define DS3232_REG_SECONDS 0x00 |
| #define DS3232_REG_MINUTES 0x01 |
| #define DS3232_REG_HOURS 0x02 |
| #define DS3232_REG_AMPM 0x02 |
| #define DS3232_REG_DAY 0x03 |
| #define DS3232_REG_DATE 0x04 |
| #define DS3232_REG_MONTH 0x05 |
| #define DS3232_REG_CENTURY 0x05 |
| #define DS3232_REG_YEAR 0x06 |
| #define DS3232_REG_ALARM1 0x07 /* Alarm 1 BASE */ |
| #define DS3232_REG_ALARM2 0x0B /* Alarm 2 BASE */ |
| #define DS3232_REG_CR 0x0E /* Control register */ |
| # define DS3232_REG_CR_nEOSC 0x80 |
| # define DS3232_REG_CR_INTCN 0x04 |
| # define DS3232_REG_CR_A2IE 0x02 |
| # define DS3232_REG_CR_A1IE 0x01 |
| |
| #define DS3232_REG_SR 0x0F /* control/status register */ |
| # define DS3232_REG_SR_OSF 0x80 |
| # define DS3232_REG_SR_BSY 0x04 |
| # define DS3232_REG_SR_A2F 0x02 |
| # define DS3232_REG_SR_A1F 0x01 |
| |
| #define DS3232_REG_TEMPERATURE 0x11 |
| #define DS3232_REG_SRAM_START 0x14 |
| #define DS3232_REG_SRAM_END 0xFF |
| |
| #define DS3232_REG_SRAM_SIZE 236 |
| |
| struct ds3232 { |
| struct device *dev; |
| struct regmap *regmap; |
| int irq; |
| struct rtc_device *rtc; |
| |
| bool suspended; |
| }; |
| |
| static int ds3232_check_rtc_status(struct device *dev) |
| { |
| struct ds3232 *ds3232 = dev_get_drvdata(dev); |
| int ret = 0; |
| int control, stat; |
| |
| ret = regmap_read(ds3232->regmap, DS3232_REG_SR, &stat); |
| if (ret) |
| return ret; |
| |
| if (stat & DS3232_REG_SR_OSF) |
| dev_warn(dev, |
| "oscillator discontinuity flagged, " |
| "time unreliable\n"); |
| |
| stat &= ~(DS3232_REG_SR_OSF | DS3232_REG_SR_A1F | DS3232_REG_SR_A2F); |
| |
| ret = regmap_write(ds3232->regmap, DS3232_REG_SR, stat); |
| if (ret) |
| return ret; |
| |
| /* If the alarm is pending, clear it before requesting |
| * the interrupt, so an interrupt event isn't reported |
| * before everything is initialized. |
| */ |
| |
| ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control); |
| if (ret) |
| return ret; |
| |
| control &= ~(DS3232_REG_CR_A1IE | DS3232_REG_CR_A2IE); |
| control |= DS3232_REG_CR_INTCN; |
| |
| return regmap_write(ds3232->regmap, DS3232_REG_CR, control); |
| } |
| |
| static int ds3232_read_time(struct device *dev, struct rtc_time *time) |
| { |
| struct ds3232 *ds3232 = dev_get_drvdata(dev); |
| int ret; |
| u8 buf[7]; |
| unsigned int year, month, day, hour, minute, second; |
| unsigned int week, twelve_hr, am_pm; |
| unsigned int century, add_century = 0; |
| |
| ret = regmap_bulk_read(ds3232->regmap, DS3232_REG_SECONDS, buf, 7); |
| if (ret) |
| return ret; |
| |
| second = buf[0]; |
| minute = buf[1]; |
| hour = buf[2]; |
| week = buf[3]; |
| day = buf[4]; |
| month = buf[5]; |
| year = buf[6]; |
| |
| /* Extract additional information for AM/PM and century */ |
| |
| twelve_hr = hour & 0x40; |
| am_pm = hour & 0x20; |
| century = month & 0x80; |
| |
| /* Write to rtc_time structure */ |
| |
| time->tm_sec = bcd2bin(second); |
| time->tm_min = bcd2bin(minute); |
| if (twelve_hr) { |
| /* Convert to 24 hr */ |
| if (am_pm) |
| time->tm_hour = bcd2bin(hour & 0x1F) + 12; |
| else |
| time->tm_hour = bcd2bin(hour & 0x1F); |
| } else { |
| time->tm_hour = bcd2bin(hour); |
| } |
| |
| /* Day of the week in linux range is 0~6 while 1~7 in RTC chip */ |
| time->tm_wday = bcd2bin(week) - 1; |
| time->tm_mday = bcd2bin(day); |
| /* linux tm_mon range:0~11, while month range is 1~12 in RTC chip */ |
| time->tm_mon = bcd2bin(month & 0x7F) - 1; |
| if (century) |
| add_century = 100; |
| |
| time->tm_year = bcd2bin(year) + add_century; |
| |
| return 0; |
| } |
| |
| static int ds3232_set_time(struct device *dev, struct rtc_time *time) |
| { |
| struct ds3232 *ds3232 = dev_get_drvdata(dev); |
| u8 buf[7]; |
| |
| /* Extract time from rtc_time and load into ds3232*/ |
| |
| buf[0] = bin2bcd(time->tm_sec); |
| buf[1] = bin2bcd(time->tm_min); |
| buf[2] = bin2bcd(time->tm_hour); |
| /* Day of the week in linux range is 0~6 while 1~7 in RTC chip */ |
| buf[3] = bin2bcd(time->tm_wday + 1); |
| buf[4] = bin2bcd(time->tm_mday); /* Date */ |
| /* linux tm_mon range:0~11, while month range is 1~12 in RTC chip */ |
| buf[5] = bin2bcd(time->tm_mon + 1); |
| if (time->tm_year >= 100) { |
| buf[5] |= 0x80; |
| buf[6] = bin2bcd(time->tm_year - 100); |
| } else { |
| buf[6] = bin2bcd(time->tm_year); |
| } |
| |
| return regmap_bulk_write(ds3232->regmap, DS3232_REG_SECONDS, buf, 7); |
| } |
| |
| /* |
| * DS3232 has two alarm, we only use alarm1 |
| * According to linux specification, only support one-shot alarm |
| * no periodic alarm mode |
| */ |
| static int ds3232_read_alarm(struct device *dev, struct rtc_wkalrm *alarm) |
| { |
| struct ds3232 *ds3232 = dev_get_drvdata(dev); |
| int control, stat; |
| int ret; |
| u8 buf[4]; |
| |
| ret = regmap_read(ds3232->regmap, DS3232_REG_SR, &stat); |
| if (ret) |
| goto out; |
| ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control); |
| if (ret) |
| goto out; |
| ret = regmap_bulk_read(ds3232->regmap, DS3232_REG_ALARM1, buf, 4); |
| if (ret) |
| goto out; |
| |
| alarm->time.tm_sec = bcd2bin(buf[0] & 0x7F); |
| alarm->time.tm_min = bcd2bin(buf[1] & 0x7F); |
| alarm->time.tm_hour = bcd2bin(buf[2] & 0x7F); |
| alarm->time.tm_mday = bcd2bin(buf[3] & 0x7F); |
| |
| alarm->enabled = !!(control & DS3232_REG_CR_A1IE); |
| alarm->pending = !!(stat & DS3232_REG_SR_A1F); |
| |
| ret = 0; |
| out: |
| return ret; |
| } |
| |
| /* |
| * linux rtc-module does not support wday alarm |
| * and only 24h time mode supported indeed |
| */ |
| static int ds3232_set_alarm(struct device *dev, struct rtc_wkalrm *alarm) |
| { |
| struct ds3232 *ds3232 = dev_get_drvdata(dev); |
| int control, stat; |
| int ret; |
| u8 buf[4]; |
| |
| if (ds3232->irq <= 0) |
| return -EINVAL; |
| |
| buf[0] = bin2bcd(alarm->time.tm_sec); |
| buf[1] = bin2bcd(alarm->time.tm_min); |
| buf[2] = bin2bcd(alarm->time.tm_hour); |
| buf[3] = bin2bcd(alarm->time.tm_mday); |
| |
| /* clear alarm interrupt enable bit */ |
| ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control); |
| if (ret) |
| goto out; |
| control &= ~(DS3232_REG_CR_A1IE | DS3232_REG_CR_A2IE); |
| ret = regmap_write(ds3232->regmap, DS3232_REG_CR, control); |
| if (ret) |
| goto out; |
| |
| /* clear any pending alarm flag */ |
| ret = regmap_read(ds3232->regmap, DS3232_REG_SR, &stat); |
| if (ret) |
| goto out; |
| stat &= ~(DS3232_REG_SR_A1F | DS3232_REG_SR_A2F); |
| ret = regmap_write(ds3232->regmap, DS3232_REG_SR, stat); |
| if (ret) |
| goto out; |
| |
| ret = regmap_bulk_write(ds3232->regmap, DS3232_REG_ALARM1, buf, 4); |
| if (ret) |
| goto out; |
| |
| if (alarm->enabled) { |
| control |= DS3232_REG_CR_A1IE; |
| ret = regmap_write(ds3232->regmap, DS3232_REG_CR, control); |
| } |
| out: |
| return ret; |
| } |
| |
| static int ds3232_update_alarm(struct device *dev, unsigned int enabled) |
| { |
| struct ds3232 *ds3232 = dev_get_drvdata(dev); |
| int control; |
| int ret; |
| |
| ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control); |
| if (ret) |
| return ret; |
| |
| if (enabled) |
| /* enable alarm1 interrupt */ |
| control |= DS3232_REG_CR_A1IE; |
| else |
| /* disable alarm1 interrupt */ |
| control &= ~(DS3232_REG_CR_A1IE); |
| ret = regmap_write(ds3232->regmap, DS3232_REG_CR, control); |
| |
| return ret; |
| } |
| |
| /* |
| * Temperature sensor support for ds3232/ds3234 devices. |
| * A user-initiated temperature conversion is not started by this function, |
| * so the temperature is updated once every 64 seconds. |
| */ |
| static int ds3232_hwmon_read_temp(struct device *dev, long int *mC) |
| { |
| struct ds3232 *ds3232 = dev_get_drvdata(dev); |
| u8 temp_buf[2]; |
| s16 temp; |
| int ret; |
| |
| ret = regmap_bulk_read(ds3232->regmap, DS3232_REG_TEMPERATURE, temp_buf, |
| sizeof(temp_buf)); |
| if (ret < 0) |
| return ret; |
| |
| /* |
| * Temperature is represented as a 10-bit code with a resolution of |
| * 0.25 degree celsius and encoded in two's complement format. |
| */ |
| temp = (temp_buf[0] << 8) | temp_buf[1]; |
| temp >>= 6; |
| *mC = temp * 250; |
| |
| return 0; |
| } |
| |
| static umode_t ds3232_hwmon_is_visible(const void *data, |
| enum hwmon_sensor_types type, |
| u32 attr, int channel) |
| { |
| if (type != hwmon_temp) |
| return 0; |
| |
| switch (attr) { |
| case hwmon_temp_input: |
| return 0444; |
| default: |
| return 0; |
| } |
| } |
| |
| static int ds3232_hwmon_read(struct device *dev, |
| enum hwmon_sensor_types type, |
| u32 attr, int channel, long *temp) |
| { |
| int err; |
| |
| switch (attr) { |
| case hwmon_temp_input: |
| err = ds3232_hwmon_read_temp(dev, temp); |
| break; |
| default: |
| err = -EOPNOTSUPP; |
| break; |
| } |
| |
| return err; |
| } |
| |
| static u32 ds3232_hwmon_chip_config[] = { |
| HWMON_C_REGISTER_TZ, |
| 0 |
| }; |
| |
| static const struct hwmon_channel_info ds3232_hwmon_chip = { |
| .type = hwmon_chip, |
| .config = ds3232_hwmon_chip_config, |
| }; |
| |
| static u32 ds3232_hwmon_temp_config[] = { |
| HWMON_T_INPUT, |
| 0 |
| }; |
| |
| static const struct hwmon_channel_info ds3232_hwmon_temp = { |
| .type = hwmon_temp, |
| .config = ds3232_hwmon_temp_config, |
| }; |
| |
| static const struct hwmon_channel_info * const ds3232_hwmon_info[] = { |
| &ds3232_hwmon_chip, |
| &ds3232_hwmon_temp, |
| NULL |
| }; |
| |
| static const struct hwmon_ops ds3232_hwmon_hwmon_ops = { |
| .is_visible = ds3232_hwmon_is_visible, |
| .read = ds3232_hwmon_read, |
| }; |
| |
| static const struct hwmon_chip_info ds3232_hwmon_chip_info = { |
| .ops = &ds3232_hwmon_hwmon_ops, |
| .info = ds3232_hwmon_info, |
| }; |
| |
| static void ds3232_hwmon_register(struct device *dev, const char *name) |
| { |
| struct ds3232 *ds3232 = dev_get_drvdata(dev); |
| struct device *hwmon_dev; |
| |
| if (!IS_ENABLED(CONFIG_RTC_DRV_DS3232_HWMON)) |
| return; |
| |
| hwmon_dev = devm_hwmon_device_register_with_info(dev, name, ds3232, |
| &ds3232_hwmon_chip_info, |
| NULL); |
| if (IS_ERR(hwmon_dev)) { |
| dev_err(dev, "unable to register hwmon device %ld\n", |
| PTR_ERR(hwmon_dev)); |
| } |
| } |
| |
| static int ds3232_alarm_irq_enable(struct device *dev, unsigned int enabled) |
| { |
| struct ds3232 *ds3232 = dev_get_drvdata(dev); |
| |
| if (ds3232->irq <= 0) |
| return -EINVAL; |
| |
| return ds3232_update_alarm(dev, enabled); |
| } |
| |
| static irqreturn_t ds3232_irq(int irq, void *dev_id) |
| { |
| struct device *dev = dev_id; |
| struct ds3232 *ds3232 = dev_get_drvdata(dev); |
| int ret; |
| int stat, control; |
| |
| rtc_lock(ds3232->rtc); |
| |
| ret = regmap_read(ds3232->regmap, DS3232_REG_SR, &stat); |
| if (ret) |
| goto unlock; |
| |
| if (stat & DS3232_REG_SR_A1F) { |
| ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control); |
| if (ret) { |
| dev_warn(ds3232->dev, |
| "Read Control Register error %d\n", ret); |
| } else { |
| /* disable alarm1 interrupt */ |
| control &= ~(DS3232_REG_CR_A1IE); |
| ret = regmap_write(ds3232->regmap, DS3232_REG_CR, |
| control); |
| if (ret) { |
| dev_warn(ds3232->dev, |
| "Write Control Register error %d\n", |
| ret); |
| goto unlock; |
| } |
| |
| /* clear the alarm pend flag */ |
| stat &= ~DS3232_REG_SR_A1F; |
| ret = regmap_write(ds3232->regmap, DS3232_REG_SR, stat); |
| if (ret) { |
| dev_warn(ds3232->dev, |
| "Write Status Register error %d\n", |
| ret); |
| goto unlock; |
| } |
| |
| rtc_update_irq(ds3232->rtc, 1, RTC_AF | RTC_IRQF); |
| } |
| } |
| |
| unlock: |
| rtc_unlock(ds3232->rtc); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const struct rtc_class_ops ds3232_rtc_ops = { |
| .read_time = ds3232_read_time, |
| .set_time = ds3232_set_time, |
| .read_alarm = ds3232_read_alarm, |
| .set_alarm = ds3232_set_alarm, |
| .alarm_irq_enable = ds3232_alarm_irq_enable, |
| }; |
| |
| static int ds3232_nvmem_read(void *priv, unsigned int offset, void *val, |
| size_t bytes) |
| { |
| struct regmap *ds3232_regmap = (struct regmap *)priv; |
| |
| return regmap_bulk_read(ds3232_regmap, DS3232_REG_SRAM_START + offset, |
| val, bytes); |
| } |
| |
| static int ds3232_nvmem_write(void *priv, unsigned int offset, void *val, |
| size_t bytes) |
| { |
| struct regmap *ds3232_regmap = (struct regmap *)priv; |
| |
| return regmap_bulk_write(ds3232_regmap, DS3232_REG_SRAM_START + offset, |
| val, bytes); |
| } |
| |
| static int ds3232_probe(struct device *dev, struct regmap *regmap, int irq, |
| const char *name) |
| { |
| struct ds3232 *ds3232; |
| int ret; |
| struct nvmem_config nvmem_cfg = { |
| .name = "ds3232_sram", |
| .stride = 1, |
| .size = DS3232_REG_SRAM_SIZE, |
| .word_size = 1, |
| .reg_read = ds3232_nvmem_read, |
| .reg_write = ds3232_nvmem_write, |
| .priv = regmap, |
| .type = NVMEM_TYPE_BATTERY_BACKED |
| }; |
| |
| ds3232 = devm_kzalloc(dev, sizeof(*ds3232), GFP_KERNEL); |
| if (!ds3232) |
| return -ENOMEM; |
| |
| ds3232->regmap = regmap; |
| ds3232->irq = irq; |
| ds3232->dev = dev; |
| dev_set_drvdata(dev, ds3232); |
| |
| ret = ds3232_check_rtc_status(dev); |
| if (ret) |
| return ret; |
| |
| if (ds3232->irq > 0) |
| device_init_wakeup(dev, 1); |
| |
| ds3232_hwmon_register(dev, name); |
| |
| ds3232->rtc = devm_rtc_device_register(dev, name, &ds3232_rtc_ops, |
| THIS_MODULE); |
| if (IS_ERR(ds3232->rtc)) |
| return PTR_ERR(ds3232->rtc); |
| |
| ret = devm_rtc_nvmem_register(ds3232->rtc, &nvmem_cfg); |
| if(ret) |
| return ret; |
| |
| if (ds3232->irq > 0) { |
| ret = devm_request_threaded_irq(dev, ds3232->irq, NULL, |
| ds3232_irq, |
| IRQF_SHARED | IRQF_ONESHOT, |
| name, dev); |
| if (ret) { |
| device_set_wakeup_capable(dev, 0); |
| ds3232->irq = 0; |
| dev_err(dev, "unable to request IRQ\n"); |
| } |
| } |
| |
| return 0; |
| } |
| |
| #if IS_ENABLED(CONFIG_I2C) |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int ds3232_suspend(struct device *dev) |
| { |
| struct ds3232 *ds3232 = dev_get_drvdata(dev); |
| |
| if (device_may_wakeup(dev)) { |
| if (enable_irq_wake(ds3232->irq)) |
| dev_warn_once(dev, "Cannot set wakeup source\n"); |
| } |
| |
| return 0; |
| } |
| |
| static int ds3232_resume(struct device *dev) |
| { |
| struct ds3232 *ds3232 = dev_get_drvdata(dev); |
| |
| if (device_may_wakeup(dev)) |
| disable_irq_wake(ds3232->irq); |
| |
| return 0; |
| } |
| #endif |
| |
| static const struct dev_pm_ops ds3232_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(ds3232_suspend, ds3232_resume) |
| }; |
| |
| static int ds3232_i2c_probe(struct i2c_client *client) |
| { |
| struct regmap *regmap; |
| static const struct regmap_config config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = DS3232_REG_SRAM_END, |
| }; |
| |
| regmap = devm_regmap_init_i2c(client, &config); |
| if (IS_ERR(regmap)) { |
| dev_err(&client->dev, "%s: regmap allocation failed: %ld\n", |
| __func__, PTR_ERR(regmap)); |
| return PTR_ERR(regmap); |
| } |
| |
| return ds3232_probe(&client->dev, regmap, client->irq, client->name); |
| } |
| |
| static const struct i2c_device_id ds3232_id[] = { |
| { "ds3232" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, ds3232_id); |
| |
| static const __maybe_unused struct of_device_id ds3232_of_match[] = { |
| { .compatible = "dallas,ds3232" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, ds3232_of_match); |
| |
| static struct i2c_driver ds3232_driver = { |
| .driver = { |
| .name = "rtc-ds3232", |
| .of_match_table = of_match_ptr(ds3232_of_match), |
| .pm = &ds3232_pm_ops, |
| }, |
| .probe = ds3232_i2c_probe, |
| .id_table = ds3232_id, |
| }; |
| |
| static int ds3232_register_driver(void) |
| { |
| return i2c_add_driver(&ds3232_driver); |
| } |
| |
| static void ds3232_unregister_driver(void) |
| { |
| i2c_del_driver(&ds3232_driver); |
| } |
| |
| #else |
| |
| static int ds3232_register_driver(void) |
| { |
| return 0; |
| } |
| |
| static void ds3232_unregister_driver(void) |
| { |
| } |
| |
| #endif |
| |
| #if IS_ENABLED(CONFIG_SPI_MASTER) |
| |
| static int ds3234_probe(struct spi_device *spi) |
| { |
| int res; |
| unsigned int tmp; |
| static const struct regmap_config config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = DS3232_REG_SRAM_END, |
| .write_flag_mask = 0x80, |
| }; |
| struct regmap *regmap; |
| |
| regmap = devm_regmap_init_spi(spi, &config); |
| if (IS_ERR(regmap)) { |
| dev_err(&spi->dev, "%s: regmap allocation failed: %ld\n", |
| __func__, PTR_ERR(regmap)); |
| return PTR_ERR(regmap); |
| } |
| |
| spi->mode = SPI_MODE_3; |
| spi->bits_per_word = 8; |
| spi_setup(spi); |
| |
| res = regmap_read(regmap, DS3232_REG_SECONDS, &tmp); |
| if (res) |
| return res; |
| |
| /* Control settings |
| * |
| * CONTROL_REG |
| * BIT 7 6 5 4 3 2 1 0 |
| * EOSC BBSQW CONV RS2 RS1 INTCN A2IE A1IE |
| * |
| * 0 0 0 1 1 1 0 0 |
| * |
| * CONTROL_STAT_REG |
| * BIT 7 6 5 4 3 2 1 0 |
| * OSF BB32kHz CRATE1 CRATE0 EN32kHz BSY A2F A1F |
| * |
| * 1 0 0 0 1 0 0 0 |
| */ |
| res = regmap_read(regmap, DS3232_REG_CR, &tmp); |
| if (res) |
| return res; |
| res = regmap_write(regmap, DS3232_REG_CR, tmp & 0x1c); |
| if (res) |
| return res; |
| |
| res = regmap_read(regmap, DS3232_REG_SR, &tmp); |
| if (res) |
| return res; |
| res = regmap_write(regmap, DS3232_REG_SR, tmp & 0x88); |
| if (res) |
| return res; |
| |
| /* Print our settings */ |
| res = regmap_read(regmap, DS3232_REG_CR, &tmp); |
| if (res) |
| return res; |
| dev_info(&spi->dev, "Control Reg: 0x%02x\n", tmp); |
| |
| res = regmap_read(regmap, DS3232_REG_SR, &tmp); |
| if (res) |
| return res; |
| dev_info(&spi->dev, "Ctrl/Stat Reg: 0x%02x\n", tmp); |
| |
| return ds3232_probe(&spi->dev, regmap, spi->irq, "ds3234"); |
| } |
| |
| static struct spi_driver ds3234_driver = { |
| .driver = { |
| .name = "ds3234", |
| }, |
| .probe = ds3234_probe, |
| }; |
| |
| static int ds3234_register_driver(void) |
| { |
| return spi_register_driver(&ds3234_driver); |
| } |
| |
| static void ds3234_unregister_driver(void) |
| { |
| spi_unregister_driver(&ds3234_driver); |
| } |
| |
| #else |
| |
| static int ds3234_register_driver(void) |
| { |
| return 0; |
| } |
| |
| static void ds3234_unregister_driver(void) |
| { |
| } |
| |
| #endif |
| |
| static int __init ds323x_init(void) |
| { |
| int ret; |
| |
| ret = ds3232_register_driver(); |
| if (ret) { |
| pr_err("Failed to register ds3232 driver: %d\n", ret); |
| return ret; |
| } |
| |
| ret = ds3234_register_driver(); |
| if (ret) { |
| pr_err("Failed to register ds3234 driver: %d\n", ret); |
| ds3232_unregister_driver(); |
| } |
| |
| return ret; |
| } |
| module_init(ds323x_init) |
| |
| static void __exit ds323x_exit(void) |
| { |
| ds3234_unregister_driver(); |
| ds3232_unregister_driver(); |
| } |
| module_exit(ds323x_exit) |
| |
| MODULE_AUTHOR("Srikanth Srinivasan <srikanth.srinivasan@freescale.com>"); |
| MODULE_AUTHOR("Dennis Aberilla <denzzzhome@yahoo.com>"); |
| MODULE_DESCRIPTION("Maxim/Dallas DS3232/DS3234 RTC Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("spi:ds3234"); |