ice: Add basic driver framework for Intel(R) E800 Series
This patch adds a basic driver framework for the Intel(R) E800 Ethernet
Series of network devices. There is no functionality right now other than
the ability to load.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
new file mode 100644
index 0000000..3ada230
--- /dev/null
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018, Intel Corporation. */
+
+/* Intel(R) Ethernet Connection E800 Series Linux Driver */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "ice.h"
+
+#define DRV_VERSION "ice-0.0.1-k"
+#define DRV_SUMMARY "Intel(R) Ethernet Connection E800 Series Linux Driver"
+static const char ice_drv_ver[] = DRV_VERSION;
+static const char ice_driver_string[] = DRV_SUMMARY;
+static const char ice_copyright[] = "Copyright (c) 2018, Intel Corporation.";
+
+MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
+MODULE_DESCRIPTION(DRV_SUMMARY);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+static int debug = -1;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "netif message level (0=none,...,0x7FFF=all)");
+
+/**
+ * ice_probe - Device initialization routine
+ * @pdev: PCI device information struct
+ * @ent: entry in ice_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ */
+static int ice_probe(struct pci_dev *pdev,
+ const struct pci_device_id __always_unused *ent)
+{
+ struct ice_pf *pf;
+ struct ice_hw *hw;
+ int err;
+
+ /* this driver uses devres, see Documentation/driver-model/devres.txt */
+ err = pcim_enable_device(pdev);
+ if (err)
+ return err;
+
+ err = pcim_iomap_regions(pdev, BIT(ICE_BAR0), pci_name(pdev));
+ if (err) {
+ dev_err(&pdev->dev, "I/O map error %d\n", err);
+ return err;
+ }
+
+ pf = devm_kzalloc(&pdev->dev, sizeof(*pf), GFP_KERNEL);
+ if (!pf)
+ return -ENOMEM;
+
+ /* set up for high or low dma */
+ err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+ if (err)
+ err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ if (err) {
+ dev_err(&pdev->dev, "DMA configuration failed: 0x%x\n", err);
+ return err;
+ }
+
+ pci_enable_pcie_error_reporting(pdev);
+ pci_set_master(pdev);
+
+ pf->pdev = pdev;
+ pci_set_drvdata(pdev, pf);
+ set_bit(__ICE_DOWN, pf->state);
+
+ hw = &pf->hw;
+ hw->hw_addr = pcim_iomap_table(pdev)[ICE_BAR0];
+ hw->back = pf;
+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
+ pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
+ hw->subsystem_vendor_id = pdev->subsystem_vendor;
+ hw->subsystem_device_id = pdev->subsystem_device;
+ hw->bus.device = PCI_SLOT(pdev->devfn);
+ hw->bus.func = PCI_FUNC(pdev->devfn);
+ pf->msg_enable = netif_msg_init(debug, ICE_DFLT_NETIF_M);
+
+ return 0;
+}
+
+/**
+ * ice_remove - Device removal routine
+ * @pdev: PCI device information struct
+ */
+static void ice_remove(struct pci_dev *pdev)
+{
+ struct ice_pf *pf = pci_get_drvdata(pdev);
+
+ if (!pf)
+ return;
+
+ set_bit(__ICE_DOWN, pf->state);
+ pci_disable_pcie_error_reporting(pdev);
+}
+
+/* ice_pci_tbl - PCI Device ID Table
+ *
+ * Wildcard entries (PCI_ANY_ID) should come last
+ * Last entry must be all 0s
+ *
+ * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
+ * Class, Class Mask, private data (not used) }
+ */
+static const struct pci_device_id ice_pci_tbl[] = {
+ { PCI_VDEVICE(INTEL, ICE_DEV_ID_C810_BACKPLANE), 0 },
+ { PCI_VDEVICE(INTEL, ICE_DEV_ID_C810_QSFP), 0 },
+ { PCI_VDEVICE(INTEL, ICE_DEV_ID_C810_SFP), 0 },
+ { PCI_VDEVICE(INTEL, ICE_DEV_ID_C810_10G_BASE_T), 0 },
+ { PCI_VDEVICE(INTEL, ICE_DEV_ID_C810_SGMII), 0 },
+ /* required last entry */
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, ice_pci_tbl);
+
+static struct pci_driver ice_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = ice_pci_tbl,
+ .probe = ice_probe,
+ .remove = ice_remove,
+};
+
+/**
+ * ice_module_init - Driver registration routine
+ *
+ * ice_module_init is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ */
+static int __init ice_module_init(void)
+{
+ int status;
+
+ pr_info("%s - version %s\n", ice_driver_string, ice_drv_ver);
+ pr_info("%s\n", ice_copyright);
+
+ status = pci_register_driver(&ice_driver);
+ if (status)
+ pr_err("failed to register pci driver, err %d\n", status);
+
+ return status;
+}
+module_init(ice_module_init);
+
+/**
+ * ice_module_exit - Driver exit cleanup routine
+ *
+ * ice_module_exit is called just before the driver is removed
+ * from memory.
+ */
+static void __exit ice_module_exit(void)
+{
+ pci_unregister_driver(&ice_driver);
+ pr_info("module unloaded\n");
+}
+module_exit(ice_module_exit);
