| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * dts file for lg1312 SoC |
| * |
| * Copyright (C) 2016, LG Electronics |
| */ |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| / { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| compatible = "lge,lg1312"; |
| interrupt-parent = <&gic>; |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x0 0x0>; |
| next-level-cache = <&L2_0>; |
| }; |
| cpu1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x0 0x1>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_0>; |
| }; |
| cpu2: cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x0 0x2>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_0>; |
| }; |
| cpu3: cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53"; |
| reg = <0x0 0x3>; |
| enable-method = "psci"; |
| next-level-cache = <&L2_0>; |
| }; |
| L2_0: l2-cache0 { |
| compatible = "cache"; |
| }; |
| }; |
| |
| psci { |
| compatible = "arm,psci-0.2", "arm,psci"; |
| method = "smc"; |
| cpu_suspend = <0x84000001>; |
| cpu_off = <0x84000002>; |
| cpu_on = <0x84000003>; |
| }; |
| |
| gic: interrupt-controller@c0001000 { |
| #interrupt-cells = <3>; |
| compatible = "arm,gic-400"; |
| interrupt-controller; |
| reg = <0x0 0xc0001000 0x1000>, |
| <0x0 0xc0002000 0x2000>, |
| <0x0 0xc0004000 0x2000>, |
| <0x0 0xc0006000 0x2000>; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a53-pmu"; |
| interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-affinity = <&cpu0>, |
| <&cpu1>, |
| <&cpu2>, |
| <&cpu3>; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) | |
| IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) | |
| IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) | |
| IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) | |
| IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| clk_bus: clk_bus { |
| #clock-cells = <0>; |
| |
| compatible = "fixed-clock"; |
| clock-frequency = <198000000>; |
| clock-output-names = "BUSCLK"; |
| }; |
| |
| soc { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| |
| compatible = "simple-bus"; |
| interrupt-parent = <&gic>; |
| ranges; |
| |
| eth0: ethernet@c1b00000 { |
| compatible = "cdns,gem"; |
| reg = <0x0 0xc1b00000 0x1000>; |
| interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk_bus>, <&clk_bus>; |
| clock-names = "hclk", "pclk"; |
| phy-mode = "rmii"; |
| /* Filled in by boot */ |
| mac-address = [ 00 00 00 00 00 00 ]; |
| }; |
| }; |
| |
| amba { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| #interrupt-cells = <3>; |
| |
| compatible = "simple-bus"; |
| interrupt-parent = <&gic>; |
| ranges; |
| |
| timers: timer@fd100000 { |
| compatible = "arm,sp804", "arm,primecell"; |
| reg = <0x0 0xfd100000 0x1000>; |
| interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk_bus>, <&clk_bus>, <&clk_bus>; |
| clock-names = "timer0clk", "timer1clk", "apb_pclk"; |
| }; |
| wdog: watchdog@fd200000 { |
| compatible = "arm,sp805", "arm,primecell"; |
| reg = <0x0 0xfd200000 0x1000>; |
| interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk_bus>, <&clk_bus>; |
| clock-names = "wdog_clk", "apb_pclk"; |
| }; |
| uart0: serial@fe000000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x0 0xfe000000 0x1000>; |
| interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk_bus>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| uart1: serial@fe100000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x0 0xfe100000 0x1000>; |
| interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk_bus>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| uart2: serial@fe200000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x0 0xfe200000 0x1000>; |
| interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk_bus>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| spi0: spi@fe800000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x0 0xfe800000 0x1000>; |
| interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk_bus>; |
| clock-names = "apb_pclk"; |
| }; |
| spi1: spi@fe900000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x0 0xfe900000 0x1000>; |
| interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk_bus>; |
| clock-names = "apb_pclk"; |
| }; |
| dmac0: dma-controller@c1128000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x0 0xc1128000 0x1000>; |
| interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk_bus>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| }; |
| gpio0: gpio@fd400000 { |
| #gpio-cells = <2>; |
| compatible = "arm,pl061", "arm,primecell"; |
| gpio-controller; |
| reg = <0x0 0xfd400000 0x1000>; |
| clocks = <&clk_bus>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| gpio1: gpio@fd410000 { |
| #gpio-cells = <2>; |
| compatible = "arm,pl061", "arm,primecell"; |
| gpio-controller; |
| reg = <0x0 0xfd410000 0x1000>; |
| clocks = <&clk_bus>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| gpio2: gpio@fd420000 { |
| #gpio-cells = <2>; |
| compatible = "arm,pl061", "arm,primecell"; |
| gpio-controller; |
| reg = <0x0 0xfd420000 0x1000>; |
| clocks = <&clk_bus>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| gpio3: gpio@fd430000 { |
| #gpio-cells = <2>; |
| compatible = "arm,pl061", "arm,primecell"; |
| gpio-controller; |
| reg = <0x0 0xfd430000 0x1000>; |
| clocks = <&clk_bus>; |
| clock-names = "apb_pclk"; |
| }; |
| gpio4: gpio@fd440000 { |
| #gpio-cells = <2>; |
| compatible = "arm,pl061", "arm,primecell"; |
| gpio-controller; |
| reg = <0x0 0xfd440000 0x1000>; |
| clocks = <&clk_bus>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| gpio5: gpio@fd450000 { |
| #gpio-cells = <2>; |
| compatible = "arm,pl061", "arm,primecell"; |
| gpio-controller; |
| reg = <0x0 0xfd450000 0x1000>; |
| clocks = <&clk_bus>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| gpio6: gpio@fd460000 { |
| #gpio-cells = <2>; |
| compatible = "arm,pl061", "arm,primecell"; |
| gpio-controller; |
| reg = <0x0 0xfd460000 0x1000>; |
| clocks = <&clk_bus>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| gpio7: gpio@fd470000 { |
| #gpio-cells = <2>; |
| compatible = "arm,pl061", "arm,primecell"; |
| gpio-controller; |
| reg = <0x0 0xfd470000 0x1000>; |
| clocks = <&clk_bus>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| gpio8: gpio@fd480000 { |
| #gpio-cells = <2>; |
| compatible = "arm,pl061", "arm,primecell"; |
| gpio-controller; |
| reg = <0x0 0xfd480000 0x1000>; |
| clocks = <&clk_bus>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| gpio9: gpio@fd490000 { |
| #gpio-cells = <2>; |
| compatible = "arm,pl061", "arm,primecell"; |
| gpio-controller; |
| reg = <0x0 0xfd490000 0x1000>; |
| clocks = <&clk_bus>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| gpio10: gpio@fd4a0000 { |
| #gpio-cells = <2>; |
| compatible = "arm,pl061", "arm,primecell"; |
| gpio-controller; |
| reg = <0x0 0xfd4a0000 0x1000>; |
| clocks = <&clk_bus>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| gpio11: gpio@fd4b0000 { |
| #gpio-cells = <2>; |
| compatible = "arm,pl061", "arm,primecell"; |
| gpio-controller; |
| reg = <0x0 0xfd4b0000 0x1000>; |
| clocks = <&clk_bus>; |
| clock-names = "apb_pclk"; |
| }; |
| gpio12: gpio@fd4c0000 { |
| #gpio-cells = <2>; |
| compatible = "arm,pl061", "arm,primecell"; |
| gpio-controller; |
| reg = <0x0 0xfd4c0000 0x1000>; |
| clocks = <&clk_bus>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| gpio13: gpio@fd4d0000 { |
| #gpio-cells = <2>; |
| compatible = "arm,pl061", "arm,primecell"; |
| gpio-controller; |
| reg = <0x0 0xfd4d0000 0x1000>; |
| clocks = <&clk_bus>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| gpio14: gpio@fd4e0000 { |
| #gpio-cells = <2>; |
| compatible = "arm,pl061", "arm,primecell"; |
| gpio-controller; |
| reg = <0x0 0xfd4e0000 0x1000>; |
| clocks = <&clk_bus>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| gpio15: gpio@fd4f0000 { |
| #gpio-cells = <2>; |
| compatible = "arm,pl061", "arm,primecell"; |
| gpio-controller; |
| reg = <0x0 0xfd4f0000 0x1000>; |
| clocks = <&clk_bus>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| gpio16: gpio@fd500000 { |
| #gpio-cells = <2>; |
| compatible = "arm,pl061", "arm,primecell"; |
| gpio-controller; |
| reg = <0x0 0xfd500000 0x1000>; |
| clocks = <&clk_bus>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| gpio17: gpio@fd510000 { |
| #gpio-cells = <2>; |
| compatible = "arm,pl061", "arm,primecell"; |
| gpio-controller; |
| reg = <0x0 0xfd510000 0x1000>; |
| clocks = <&clk_bus>; |
| clock-names = "apb_pclk"; |
| }; |
| }; |
| }; |
