| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries. |
| */ |
| |
| /dts-v1/; |
| #include "sparx5_pcb_common.dtsi" |
| |
| /{ |
| gpio-restart { |
| compatible = "gpio-restart"; |
| gpios = <&gpio 37 GPIO_ACTIVE_LOW>; |
| priority = <200>; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| led@0 { |
| label = "twr0:green"; |
| gpios = <&sgpio_out0 8 0 GPIO_ACTIVE_LOW>; |
| }; |
| led@1 { |
| label = "twr0:yellow"; |
| gpios = <&sgpio_out0 8 1 GPIO_ACTIVE_LOW>; |
| }; |
| led@2 { |
| label = "twr1:green"; |
| gpios = <&sgpio_out0 9 0 GPIO_ACTIVE_LOW>; |
| }; |
| led@3 { |
| label = "twr1:yellow"; |
| gpios = <&sgpio_out0 9 1 GPIO_ACTIVE_LOW>; |
| }; |
| led@4 { |
| label = "twr2:green"; |
| gpios = <&sgpio_out0 10 0 GPIO_ACTIVE_LOW>; |
| }; |
| led@5 { |
| label = "twr2:yellow"; |
| gpios = <&sgpio_out0 10 1 GPIO_ACTIVE_LOW>; |
| }; |
| led@6 { |
| label = "twr3:green"; |
| gpios = <&sgpio_out0 11 0 GPIO_ACTIVE_LOW>; |
| }; |
| led@7 { |
| label = "twr3:yellow"; |
| gpios = <&sgpio_out0 11 1 GPIO_ACTIVE_LOW>; |
| }; |
| led@8 { |
| label = "eth12:green"; |
| gpios = <&sgpio_out0 12 0 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@9 { |
| label = "eth12:yellow"; |
| gpios = <&sgpio_out0 12 1 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@10 { |
| label = "eth13:green"; |
| gpios = <&sgpio_out0 13 0 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@11 { |
| label = "eth13:yellow"; |
| gpios = <&sgpio_out0 13 1 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@12 { |
| label = "eth14:green"; |
| gpios = <&sgpio_out0 14 0 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@13 { |
| label = "eth14:yellow"; |
| gpios = <&sgpio_out0 14 1 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@14 { |
| label = "eth15:green"; |
| gpios = <&sgpio_out0 15 0 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@15 { |
| label = "eth15:yellow"; |
| gpios = <&sgpio_out0 15 1 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@16 { |
| label = "eth48:green"; |
| gpios = <&sgpio_out1 16 0 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@17 { |
| label = "eth48:yellow"; |
| gpios = <&sgpio_out1 16 1 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@18 { |
| label = "eth49:green"; |
| gpios = <&sgpio_out1 17 0 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@19 { |
| label = "eth49:yellow"; |
| gpios = <&sgpio_out1 17 1 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@20 { |
| label = "eth50:green"; |
| gpios = <&sgpio_out1 18 0 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@21 { |
| label = "eth50:yellow"; |
| gpios = <&sgpio_out1 18 1 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@22 { |
| label = "eth51:green"; |
| gpios = <&sgpio_out1 19 0 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@23 { |
| label = "eth51:yellow"; |
| gpios = <&sgpio_out1 19 1 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@24 { |
| label = "eth52:green"; |
| gpios = <&sgpio_out1 20 0 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@25 { |
| label = "eth52:yellow"; |
| gpios = <&sgpio_out1 20 1 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@26 { |
| label = "eth53:green"; |
| gpios = <&sgpio_out1 21 0 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@27 { |
| label = "eth53:yellow"; |
| gpios = <&sgpio_out1 21 1 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@28 { |
| label = "eth54:green"; |
| gpios = <&sgpio_out1 22 0 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@29 { |
| label = "eth54:yellow"; |
| gpios = <&sgpio_out1 22 1 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@30 { |
| label = "eth55:green"; |
| gpios = <&sgpio_out1 23 0 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@31 { |
| label = "eth55:yellow"; |
| gpios = <&sgpio_out1 23 1 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@32 { |
| label = "eth56:green"; |
| gpios = <&sgpio_out1 24 0 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@33 { |
| label = "eth56:yellow"; |
| gpios = <&sgpio_out1 24 1 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@34 { |
| label = "eth57:green"; |
| gpios = <&sgpio_out1 25 0 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@35 { |
| label = "eth57:yellow"; |
| gpios = <&sgpio_out1 25 1 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@36 { |
| label = "eth58:green"; |
| gpios = <&sgpio_out1 26 0 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@37 { |
| label = "eth58:yellow"; |
| gpios = <&sgpio_out1 26 1 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@38 { |
| label = "eth59:green"; |
| gpios = <&sgpio_out1 27 0 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@39 { |
| label = "eth59:yellow"; |
| gpios = <&sgpio_out1 27 1 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@40 { |
| label = "eth60:green"; |
| gpios = <&sgpio_out1 28 0 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@41 { |
| label = "eth60:yellow"; |
| gpios = <&sgpio_out1 28 1 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@42 { |
| label = "eth61:green"; |
| gpios = <&sgpio_out1 29 0 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@43 { |
| label = "eth61:yellow"; |
| gpios = <&sgpio_out1 29 1 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@44 { |
| label = "eth62:green"; |
| gpios = <&sgpio_out1 30 0 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@45 { |
| label = "eth62:yellow"; |
| gpios = <&sgpio_out1 30 1 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@46 { |
| label = "eth63:green"; |
| gpios = <&sgpio_out1 31 0 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| led@47 { |
| label = "eth63:yellow"; |
| gpios = <&sgpio_out1 31 1 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| }; |
| }; |
| |
| &sgpio0 { |
| status = "okay"; |
| microchip,sgpio-port-ranges = <8 15>; |
| gpio@0 { |
| ngpios = <64>; |
| }; |
| gpio@1 { |
| ngpios = <64>; |
| }; |
| }; |
| |
| &sgpio1 { |
| status = "okay"; |
| microchip,sgpio-port-ranges = <24 31>; |
| gpio@0 { |
| ngpios = <64>; |
| }; |
| gpio@1 { |
| ngpios = <64>; |
| }; |
| }; |
| |
| &spi0 { |
| status = "okay"; |
| flash@0 { |
| compatible = "jedec,spi-nor"; |
| spi-max-frequency = <8000000>; |
| reg = <0>; |
| }; |
| }; |
| |
| &spi0 { |
| status = "okay"; |
| spi@0 { |
| compatible = "spi-mux"; |
| mux-controls = <&mux>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; /* CS0 */ |
| flash@9 { |
| compatible = "jedec,spi-nor"; |
| spi-max-frequency = <8000000>; |
| reg = <0x9>; /* SPI */ |
| }; |
| }; |
| }; |
| |
| &sgpio0 { |
| status = "okay"; |
| microchip,sgpio-port-ranges = <8 15>; |
| gpio@0 { |
| ngpios = <64>; |
| }; |
| gpio@1 { |
| ngpios = <64>; |
| }; |
| }; |
| |
| &sgpio1 { |
| status = "okay"; |
| microchip,sgpio-port-ranges = <24 31>; |
| gpio@0 { |
| ngpios = <64>; |
| }; |
| gpio@1 { |
| ngpios = <64>; |
| }; |
| }; |
| |
| &sgpio2 { |
| status = "okay"; |
| microchip,sgpio-port-ranges = <0 0>, <11 31>; |
| }; |
| |
| &gpio { |
| i2cmux_pins_i: i2cmux-pins-i { |
| pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19", |
| "GPIO_20", "GPIO_22", "GPIO_36", "GPIO_35", |
| "GPIO_50", "GPIO_51", "GPIO_56", "GPIO_57"; |
| function = "twi_scl_m"; |
| output-low; |
| }; |
| i2cmux_0: i2cmux-0 { |
| pins = "GPIO_16"; |
| function = "twi_scl_m"; |
| output-high; |
| }; |
| i2cmux_1: i2cmux-1 { |
| pins = "GPIO_17"; |
| function = "twi_scl_m"; |
| output-high; |
| }; |
| i2cmux_2: i2cmux-2 { |
| pins = "GPIO_18"; |
| function = "twi_scl_m"; |
| output-high; |
| }; |
| i2cmux_3: i2cmux-3 { |
| pins = "GPIO_19"; |
| function = "twi_scl_m"; |
| output-high; |
| }; |
| i2cmux_4: i2cmux-4 { |
| pins = "GPIO_20"; |
| function = "twi_scl_m"; |
| output-high; |
| }; |
| i2cmux_5: i2cmux-5 { |
| pins = "GPIO_22"; |
| function = "twi_scl_m"; |
| output-high; |
| }; |
| i2cmux_6: i2cmux-6 { |
| pins = "GPIO_36"; |
| function = "twi_scl_m"; |
| output-high; |
| }; |
| i2cmux_7: i2cmux-7 { |
| pins = "GPIO_35"; |
| function = "twi_scl_m"; |
| output-high; |
| }; |
| i2cmux_8: i2cmux-8 { |
| pins = "GPIO_50"; |
| function = "twi_scl_m"; |
| output-high; |
| }; |
| i2cmux_9: i2cmux-9 { |
| pins = "GPIO_51"; |
| function = "twi_scl_m"; |
| output-high; |
| }; |
| i2cmux_10: i2cmux-10 { |
| pins = "GPIO_56"; |
| function = "twi_scl_m"; |
| output-high; |
| }; |
| i2cmux_11: i2cmux-11 { |
| pins = "GPIO_57"; |
| function = "twi_scl_m"; |
| output-high; |
| }; |
| }; |
| |
| &axi { |
| i2c0_imux: i2c0-imux@0 { |
| compatible = "i2c-mux-pinctrl"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| i2c-parent = <&i2c0>; |
| }; |
| i2c0_emux: i2c0-emux@0 { |
| compatible = "i2c-mux-gpio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| i2c-parent = <&i2c0>; |
| }; |
| }; |
| |
| &i2c0_imux { |
| pinctrl-names = |
| "i2c_sfp1", "i2c_sfp2", "i2c_sfp3", "i2c_sfp4", |
| "i2c_sfp5", "i2c_sfp6", "i2c_sfp7", "i2c_sfp8", |
| "i2c_sfp9", "i2c_sfp10", "i2c_sfp11", "i2c_sfp12", "idle"; |
| pinctrl-0 = <&i2cmux_0>; |
| pinctrl-1 = <&i2cmux_1>; |
| pinctrl-2 = <&i2cmux_2>; |
| pinctrl-3 = <&i2cmux_3>; |
| pinctrl-4 = <&i2cmux_4>; |
| pinctrl-5 = <&i2cmux_5>; |
| pinctrl-6 = <&i2cmux_6>; |
| pinctrl-7 = <&i2cmux_7>; |
| pinctrl-8 = <&i2cmux_8>; |
| pinctrl-9 = <&i2cmux_9>; |
| pinctrl-10 = <&i2cmux_10>; |
| pinctrl-11 = <&i2cmux_11>; |
| pinctrl-12 = <&i2cmux_pins_i>; |
| i2c_sfp1: i2c_sfp1 { |
| reg = <0x0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| i2c_sfp2: i2c_sfp2 { |
| reg = <0x1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| i2c_sfp3: i2c_sfp3 { |
| reg = <0x2>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| i2c_sfp4: i2c_sfp4 { |
| reg = <0x3>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| i2c_sfp5: i2c_sfp5 { |
| reg = <0x4>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| i2c_sfp6: i2c_sfp6 { |
| reg = <0x5>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| i2c_sfp7: i2c_sfp7 { |
| reg = <0x6>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| i2c_sfp8: i2c_sfp8 { |
| reg = <0x7>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| i2c_sfp9: i2c_sfp9 { |
| reg = <0x8>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| i2c_sfp10: i2c_sfp10 { |
| reg = <0x9>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| i2c_sfp11: i2c_sfp11 { |
| reg = <0xa>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| i2c_sfp12: i2c_sfp12 { |
| reg = <0xb>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| &i2c0_emux { |
| mux-gpios = <&gpio 55 GPIO_ACTIVE_HIGH |
| &gpio 60 GPIO_ACTIVE_HIGH |
| &gpio 61 GPIO_ACTIVE_HIGH |
| &gpio 54 GPIO_ACTIVE_HIGH>; |
| idle-state = <0x8>; |
| i2c_sfp13: i2c_sfp13 { |
| reg = <0x0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| i2c_sfp14: i2c_sfp14 { |
| reg = <0x1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| i2c_sfp15: i2c_sfp15 { |
| reg = <0x2>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| i2c_sfp16: i2c_sfp16 { |
| reg = <0x3>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| i2c_sfp17: i2c_sfp17 { |
| reg = <0x4>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| i2c_sfp18: i2c_sfp18 { |
| reg = <0x5>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| i2c_sfp19: i2c_sfp19 { |
| reg = <0x6>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| i2c_sfp20: i2c_sfp20 { |
| reg = <0x7>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| &mdio3 { |
| status = "okay"; |
| phy64: ethernet-phy@64 { |
| reg = <28>; |
| }; |
| }; |
| |
| &axi { |
| sfp_eth12: sfp-eth12 { |
| compatible = "sff,sfp"; |
| i2c-bus = <&i2c_sfp1>; |
| tx-disable-gpios = <&sgpio_out2 11 1 GPIO_ACTIVE_LOW>; |
| los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>; |
| tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>; |
| }; |
| sfp_eth13: sfp-eth13 { |
| compatible = "sff,sfp"; |
| i2c-bus = <&i2c_sfp2>; |
| tx-disable-gpios = <&sgpio_out2 12 1 GPIO_ACTIVE_LOW>; |
| los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>; |
| tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>; |
| }; |
| sfp_eth14: sfp-eth14 { |
| compatible = "sff,sfp"; |
| i2c-bus = <&i2c_sfp3>; |
| tx-disable-gpios = <&sgpio_out2 13 1 GPIO_ACTIVE_LOW>; |
| los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>; |
| tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>; |
| }; |
| sfp_eth15: sfp-eth15 { |
| compatible = "sff,sfp"; |
| i2c-bus = <&i2c_sfp4>; |
| tx-disable-gpios = <&sgpio_out2 14 1 GPIO_ACTIVE_LOW>; |
| los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>; |
| tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>; |
| }; |
| sfp_eth48: sfp-eth48 { |
| compatible = "sff,sfp"; |
| i2c-bus = <&i2c_sfp5>; |
| tx-disable-gpios = <&sgpio_out2 15 1 GPIO_ACTIVE_LOW>; |
| los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>; |
| tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>; |
| }; |
| sfp_eth49: sfp-eth49 { |
| compatible = "sff,sfp"; |
| i2c-bus = <&i2c_sfp6>; |
| tx-disable-gpios = <&sgpio_out2 16 1 GPIO_ACTIVE_LOW>; |
| los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>; |
| tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>; |
| }; |
| sfp_eth50: sfp-eth50 { |
| compatible = "sff,sfp"; |
| i2c-bus = <&i2c_sfp7>; |
| tx-disable-gpios = <&sgpio_out2 17 1 GPIO_ACTIVE_LOW>; |
| los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>; |
| tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>; |
| }; |
| sfp_eth51: sfp-eth51 { |
| compatible = "sff,sfp"; |
| i2c-bus = <&i2c_sfp8>; |
| tx-disable-gpios = <&sgpio_out2 18 1 GPIO_ACTIVE_LOW>; |
| los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>; |
| tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>; |
| }; |
| sfp_eth52: sfp-eth52 { |
| compatible = "sff,sfp"; |
| i2c-bus = <&i2c_sfp9>; |
| tx-disable-gpios = <&sgpio_out2 19 1 GPIO_ACTIVE_LOW>; |
| los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>; |
| tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>; |
| }; |
| sfp_eth53: sfp-eth53 { |
| compatible = "sff,sfp"; |
| i2c-bus = <&i2c_sfp10>; |
| tx-disable-gpios = <&sgpio_out2 20 1 GPIO_ACTIVE_LOW>; |
| los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>; |
| tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>; |
| }; |
| sfp_eth54: sfp-eth54 { |
| compatible = "sff,sfp"; |
| i2c-bus = <&i2c_sfp11>; |
| tx-disable-gpios = <&sgpio_out2 21 1 GPIO_ACTIVE_LOW>; |
| los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>; |
| tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>; |
| }; |
| sfp_eth55: sfp-eth55 { |
| compatible = "sff,sfp"; |
| i2c-bus = <&i2c_sfp12>; |
| tx-disable-gpios = <&sgpio_out2 22 1 GPIO_ACTIVE_LOW>; |
| los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>; |
| tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>; |
| }; |
| sfp_eth56: sfp-eth56 { |
| compatible = "sff,sfp"; |
| i2c-bus = <&i2c_sfp13>; |
| tx-disable-gpios = <&sgpio_out2 23 1 GPIO_ACTIVE_LOW>; |
| los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>; |
| tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>; |
| }; |
| sfp_eth57: sfp-eth57 { |
| compatible = "sff,sfp"; |
| i2c-bus = <&i2c_sfp14>; |
| tx-disable-gpios = <&sgpio_out2 24 1 GPIO_ACTIVE_LOW>; |
| los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>; |
| tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>; |
| }; |
| sfp_eth58: sfp-eth58 { |
| compatible = "sff,sfp"; |
| i2c-bus = <&i2c_sfp15>; |
| tx-disable-gpios = <&sgpio_out2 25 1 GPIO_ACTIVE_LOW>; |
| los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>; |
| tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>; |
| }; |
| sfp_eth59: sfp-eth59 { |
| compatible = "sff,sfp"; |
| i2c-bus = <&i2c_sfp16>; |
| tx-disable-gpios = <&sgpio_out2 26 1 GPIO_ACTIVE_LOW>; |
| los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>; |
| tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>; |
| }; |
| sfp_eth60: sfp-eth60 { |
| compatible = "sff,sfp"; |
| i2c-bus = <&i2c_sfp17>; |
| tx-disable-gpios = <&sgpio_out2 27 1 GPIO_ACTIVE_LOW>; |
| los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>; |
| tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>; |
| }; |
| sfp_eth61: sfp-eth61 { |
| compatible = "sff,sfp"; |
| i2c-bus = <&i2c_sfp18>; |
| tx-disable-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_LOW>; |
| los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>; |
| tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>; |
| }; |
| sfp_eth62: sfp-eth62 { |
| compatible = "sff,sfp"; |
| i2c-bus = <&i2c_sfp19>; |
| tx-disable-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_LOW>; |
| los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>; |
| tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>; |
| }; |
| sfp_eth63: sfp-eth63 { |
| compatible = "sff,sfp"; |
| i2c-bus = <&i2c_sfp20>; |
| tx-disable-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_LOW>; |
| los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>; |
| mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>; |
| tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| &switch { |
| ethernet-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* 10G SFPs */ |
| port12: port@12 { |
| reg = <12>; |
| microchip,bandwidth = <10000>; |
| phys = <&serdes 13>; |
| phy-mode = "10gbase-r"; |
| sfp = <&sfp_eth12>; |
| microchip,sd-sgpio = <301>; |
| managed = "in-band-status"; |
| }; |
| port13: port@13 { |
| reg = <13>; |
| /* Example: CU SFP, 1G speed */ |
| microchip,bandwidth = <10000>; |
| phys = <&serdes 14>; |
| phy-mode = "10gbase-r"; |
| sfp = <&sfp_eth13>; |
| microchip,sd-sgpio = <305>; |
| managed = "in-band-status"; |
| }; |
| port14: port@14 { |
| reg = <14>; |
| microchip,bandwidth = <10000>; |
| phys = <&serdes 15>; |
| phy-mode = "10gbase-r"; |
| sfp = <&sfp_eth14>; |
| microchip,sd-sgpio = <309>; |
| managed = "in-band-status"; |
| }; |
| port15: port@15 { |
| reg = <15>; |
| microchip,bandwidth = <10000>; |
| phys = <&serdes 16>; |
| phy-mode = "10gbase-r"; |
| sfp = <&sfp_eth15>; |
| microchip,sd-sgpio = <313>; |
| managed = "in-band-status"; |
| }; |
| port48: port@48 { |
| reg = <48>; |
| microchip,bandwidth = <10000>; |
| phys = <&serdes 17>; |
| phy-mode = "10gbase-r"; |
| sfp = <&sfp_eth48>; |
| microchip,sd-sgpio = <317>; |
| managed = "in-band-status"; |
| }; |
| port49: port@49 { |
| reg = <49>; |
| microchip,bandwidth = <10000>; |
| phys = <&serdes 18>; |
| phy-mode = "10gbase-r"; |
| sfp = <&sfp_eth49>; |
| microchip,sd-sgpio = <321>; |
| managed = "in-band-status"; |
| }; |
| port50: port@50 { |
| reg = <50>; |
| microchip,bandwidth = <10000>; |
| phys = <&serdes 19>; |
| phy-mode = "10gbase-r"; |
| sfp = <&sfp_eth50>; |
| microchip,sd-sgpio = <325>; |
| managed = "in-band-status"; |
| }; |
| port51: port@51 { |
| reg = <51>; |
| microchip,bandwidth = <10000>; |
| phys = <&serdes 20>; |
| phy-mode = "10gbase-r"; |
| sfp = <&sfp_eth51>; |
| microchip,sd-sgpio = <329>; |
| managed = "in-band-status"; |
| }; |
| port52: port@52 { |
| reg = <52>; |
| microchip,bandwidth = <10000>; |
| phys = <&serdes 21>; |
| phy-mode = "10gbase-r"; |
| sfp = <&sfp_eth52>; |
| microchip,sd-sgpio = <333>; |
| managed = "in-band-status"; |
| }; |
| port53: port@53 { |
| reg = <53>; |
| microchip,bandwidth = <10000>; |
| phys = <&serdes 22>; |
| phy-mode = "10gbase-r"; |
| sfp = <&sfp_eth53>; |
| microchip,sd-sgpio = <337>; |
| managed = "in-band-status"; |
| }; |
| port54: port@54 { |
| reg = <54>; |
| microchip,bandwidth = <10000>; |
| phys = <&serdes 23>; |
| phy-mode = "10gbase-r"; |
| sfp = <&sfp_eth54>; |
| microchip,sd-sgpio = <341>; |
| managed = "in-band-status"; |
| }; |
| port55: port@55 { |
| reg = <55>; |
| microchip,bandwidth = <10000>; |
| phys = <&serdes 24>; |
| phy-mode = "10gbase-r"; |
| sfp = <&sfp_eth55>; |
| microchip,sd-sgpio = <345>; |
| managed = "in-band-status"; |
| }; |
| /* 25G SFPs */ |
| port56: port@56 { |
| reg = <56>; |
| microchip,bandwidth = <10000>; |
| phys = <&serdes 25>; |
| phy-mode = "10gbase-r"; |
| sfp = <&sfp_eth56>; |
| microchip,sd-sgpio = <349>; |
| managed = "in-band-status"; |
| }; |
| port57: port@57 { |
| reg = <57>; |
| microchip,bandwidth = <10000>; |
| phys = <&serdes 26>; |
| phy-mode = "10gbase-r"; |
| sfp = <&sfp_eth57>; |
| microchip,sd-sgpio = <353>; |
| managed = "in-band-status"; |
| }; |
| port58: port@58 { |
| reg = <58>; |
| microchip,bandwidth = <10000>; |
| phys = <&serdes 27>; |
| phy-mode = "10gbase-r"; |
| sfp = <&sfp_eth58>; |
| microchip,sd-sgpio = <357>; |
| managed = "in-band-status"; |
| }; |
| port59: port@59 { |
| reg = <59>; |
| microchip,bandwidth = <10000>; |
| phys = <&serdes 28>; |
| phy-mode = "10gbase-r"; |
| sfp = <&sfp_eth59>; |
| microchip,sd-sgpio = <361>; |
| managed = "in-band-status"; |
| }; |
| port60: port@60 { |
| reg = <60>; |
| microchip,bandwidth = <10000>; |
| phys = <&serdes 29>; |
| phy-mode = "10gbase-r"; |
| sfp = <&sfp_eth60>; |
| microchip,sd-sgpio = <365>; |
| managed = "in-band-status"; |
| }; |
| port61: port@61 { |
| reg = <61>; |
| microchip,bandwidth = <10000>; |
| phys = <&serdes 30>; |
| phy-mode = "10gbase-r"; |
| sfp = <&sfp_eth61>; |
| microchip,sd-sgpio = <369>; |
| managed = "in-band-status"; |
| }; |
| port62: port@62 { |
| reg = <62>; |
| microchip,bandwidth = <10000>; |
| phys = <&serdes 31>; |
| phy-mode = "10gbase-r"; |
| sfp = <&sfp_eth62>; |
| microchip,sd-sgpio = <373>; |
| managed = "in-band-status"; |
| }; |
| port63: port@63 { |
| reg = <63>; |
| microchip,bandwidth = <10000>; |
| phys = <&serdes 32>; |
| phy-mode = "10gbase-r"; |
| sfp = <&sfp_eth63>; |
| microchip,sd-sgpio = <377>; |
| managed = "in-band-status"; |
| }; |
| /* Finally the Management interface */ |
| port64: port@64 { |
| reg = <64>; |
| microchip,bandwidth = <1000>; |
| phys = <&serdes 0>; |
| phy-handle = <&phy64>; |
| phy-mode = "sgmii"; |
| }; |
| }; |
| }; |
