| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Google Pompom board device tree source |
| * |
| * Copyright 2020 Google LLC. |
| */ |
| |
| #include "sc7180-trogdor.dtsi" |
| /* Must come after sc7180-trogdor.dtsi to modify cros_ec */ |
| #include <arm/cros-ec-keyboard.dtsi> |
| #include "sc7180-trogdor-ti-sn65dsi86.dtsi" |
| |
| / { |
| thermal-zones { |
| 5v-choke-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <250>; |
| |
| thermal-sensors = <&pm6150_adc_tm 1>; |
| |
| trips { |
| 5v-choke-crit { |
| temperature = <125000>; |
| hysteresis = <1000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &alc5682 { |
| realtek,dmic-clk-driving-high; |
| }; |
| |
| &ap_tp_i2c { |
| status = "okay"; |
| }; |
| |
| &cpu6_alert0 { |
| temperature = <60000>; |
| }; |
| |
| &cpu6_alert1 { |
| temperature = <65000>; |
| }; |
| |
| &cpu6_thermal { |
| sustainable-power = <1124>; |
| }; |
| |
| &cpu7_alert0 { |
| temperature = <60000>; |
| }; |
| |
| &cpu7_alert1 { |
| temperature = <65000>; |
| }; |
| |
| &cpu7_thermal { |
| sustainable-power = <1124>; |
| }; |
| |
| &cpu8_alert0 { |
| temperature = <60000>; |
| }; |
| |
| &cpu8_alert1 { |
| temperature = <65000>; |
| }; |
| |
| &cpu8_thermal { |
| sustainable-power = <1124>; |
| }; |
| |
| &cpu9_alert0 { |
| temperature = <60000>; |
| }; |
| |
| &cpu9_alert1 { |
| temperature = <65000>; |
| }; |
| |
| &cpu9_thermal { |
| sustainable-power = <1124>; |
| }; |
| |
| &gpio_keys { |
| status = "okay"; |
| }; |
| |
| ap_ts_pen_1v8: &i2c4 { |
| status = "okay"; |
| clock-frequency = <400000>; |
| |
| ap_ts: touchscreen@10 { |
| compatible = "hid-over-i2c"; |
| reg = <0x10>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; |
| |
| interrupt-parent = <&tlmm>; |
| interrupts = <9 IRQ_TYPE_LEVEL_LOW>; |
| |
| post-power-on-delay-ms = <20>; |
| hid-descr-addr = <0x0001>; |
| |
| vdd-supply = <&pp3300_ts>; |
| }; |
| }; |
| |
| &keyboard_controller { |
| function-row-physmap = < |
| MATRIX_KEY(0x00, 0x02, 0) /* T1 */ |
| MATRIX_KEY(0x03, 0x02, 0) /* T2 */ |
| MATRIX_KEY(0x02, 0x02, 0) /* T3 */ |
| MATRIX_KEY(0x01, 0x02, 0) /* T4 */ |
| MATRIX_KEY(0x03, 0x04, 0) /* T5 */ |
| MATRIX_KEY(0x02, 0x04, 0) /* T6 */ |
| MATRIX_KEY(0x01, 0x04, 0) /* T7 */ |
| MATRIX_KEY(0x02, 0x09, 0) /* T8 */ |
| MATRIX_KEY(0x01, 0x09, 0) /* T9 */ |
| MATRIX_KEY(0x00, 0x04, 0) /* T10 */ |
| >; |
| linux,keymap = < |
| MATRIX_KEY(0x00, 0x02, KEY_BACK) |
| MATRIX_KEY(0x03, 0x02, KEY_REFRESH) |
| MATRIX_KEY(0x02, 0x02, KEY_ZOOM) |
| MATRIX_KEY(0x01, 0x02, KEY_SCALE) |
| MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) |
| MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) |
| MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) |
| MATRIX_KEY(0x02, 0x09, KEY_MUTE) |
| MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) |
| MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) |
| |
| CROS_STD_MAIN_KEYMAP |
| >; |
| }; |
| |
| &panel { |
| compatible = "kingdisplay,kd116n21-30nv-a010"; |
| }; |
| |
| &pen_insert { |
| /* Insert = high, eject = low */ |
| gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &pm6150_adc { |
| 5v-choke-thermistor@4e { |
| reg = <ADC5_AMUX_THM2_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time = <200>; |
| }; |
| }; |
| |
| &pm6150_adc_tm { |
| status = "okay"; |
| |
| 5v-choke-thermistor@1 { |
| reg = <1>; |
| io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>; |
| qcom,ratiometric; |
| qcom,hw-settle-time-us = <200>; |
| }; |
| }; |
| |
| &sdhc_2 { |
| status = "okay"; |
| }; |
| |
| &sound { |
| model = "sc7180-rt5682-max98357a-2mic"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&dmic_sel>; |
| dmic-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &usb_c1 { |
| status = "disabled"; |
| }; |
| |
| &wifi { |
| qcom,ath10k-calibration-variant = "GO_POMPOM"; |
| }; |
| |
| /* PINCTRL - board-specific pinctrl */ |
| |
| &tlmm { |
| gpio-line-names = "TP_INT_ODL", |
| "AP_RAM_ID0", |
| "AP_SKU_ID2", |
| "AP_RAM_ID1", |
| "", |
| "AP_RAM_ID2", |
| "AP_TP_I2C_SDA", |
| "AP_TP_I2C_SCL", |
| "TS_RESET_L", |
| "TS_INT_L", |
| "", |
| "EDP_BRIJ_IRQ", |
| "AP_EDP_BKLTEN", |
| "", |
| "", |
| "EDP_BRIJ_I2C_SDA", |
| "EDP_BRIJ_I2C_SCL", |
| "HUB_RST_L", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "AMP_EN", |
| "P_SENSOR_INT_L", |
| "AP_SAR_SENSOR_SDA", |
| "AP_SAR_SENSOR_SCL", |
| "", |
| "HP_IRQ", |
| "", |
| "EN_PP3300_DX_EDP", |
| "AP_BRD_ID2", |
| "BRIJ_SUSPEND", |
| "AP_BRD_ID0", |
| "AP_H1_SPI_MISO", |
| "AP_H1_SPI_MOSI", |
| "AP_H1_SPI_CLK", |
| "AP_H1_SPI_CS_L", |
| "", |
| "", |
| "", |
| "", |
| "H1_AP_INT_ODL", |
| "", |
| "UART_AP_TX_DBG_RX", |
| "UART_DBG_TX_AP_RX", |
| "HP_I2C_SDA", |
| "HP_I2C_SCL", |
| "FORCED_USB_BOOT", |
| "AMP_BCLK", |
| "AMP_LRCLK", |
| "AMP_DIN", |
| "PEN_PDCT_L", |
| "HP_BCLK", |
| "HP_LRCLK", |
| "HP_DOUT", |
| "HP_DIN", |
| "HP_MCLK", |
| "AP_SKU_ID0", |
| "AP_EC_SPI_MISO", |
| "AP_EC_SPI_MOSI", |
| "AP_EC_SPI_CLK", |
| "AP_EC_SPI_CS_L", |
| "AP_SPI_CLK", |
| "AP_SPI_MOSI", |
| "AP_SPI_MISO", |
| /* |
| * AP_FLASH_WP_L is crossystem ABI. Schematics |
| * call it BIOS_FLASH_WP_L. |
| */ |
| "AP_FLASH_WP_L", |
| "", |
| "AP_SPI_CS0_L", |
| "SD_CD_ODL", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "UIM2_DATA", |
| "UIM2_CLK", |
| "UIM2_RST", |
| "UIM2_PRESENT", |
| "UIM1_DATA", |
| "UIM1_CLK", |
| "UIM1_RST", |
| "", |
| "EN_PP3300_CODEC", |
| "EN_PP3300_HUB", |
| "", |
| "DMIC_SEL", |
| "", |
| "", |
| "", |
| "AP_SKU_ID1", |
| "AP_RST_REQ", |
| "", |
| "AP_BRD_ID1", |
| "AP_EC_INT_R_L", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "EDP_BRIJ_EN", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "", |
| "AP_TS_PEN_I2C_SDA", |
| "AP_TS_PEN_I2C_SCL", |
| "DP_HOT_PLUG_DET", |
| "EC_IN_RW_ODL"; |
| |
| dmic_sel: dmic-sel-state { |
| pins = "gpio86"; |
| function = "gpio"; |
| bias-pull-down; |
| }; |
| }; |
