| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org> |
| */ |
| |
| #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> |
| #include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| #include "sm8450.dtsi" |
| #include "pm8350.dtsi" |
| #include "pm8350b.dtsi" |
| #include "pm8350c.dtsi" |
| #include "pm8450.dtsi" |
| #include "pmk8350.dtsi" |
| #include "pmr735a.dtsi" |
| |
| /delete-node/ &adsp_mem; |
| /delete-node/ &rmtfs_mem; |
| /delete-node/ &video_mem; |
| |
| / { |
| chassis-type = "handset"; |
| |
| aliases { |
| serial0 = &uart7; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| label = "gpio-keys"; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>; |
| |
| key-camera-focus { |
| label = "Camera Focus"; |
| linux,code = <KEY_CAMERA_FOCUS>; |
| gpios = <&pm8350b_gpios 8 GPIO_ACTIVE_LOW>; |
| debounce-interval = <15>; |
| linux,can-disable; |
| wakeup-source; |
| }; |
| |
| key-camera-snapshot { |
| label = "Camera Snapshot"; |
| linux,code = <KEY_CAMERA>; |
| gpios = <&pm8350b_gpios 5 GPIO_ACTIVE_LOW>; |
| debounce-interval = <15>; |
| linux,can-disable; |
| wakeup-source; |
| }; |
| |
| key-volume-down { |
| label = "Volume Down"; |
| linux,code = <KEY_VOLUMEDOWN>; |
| gpios = <&pm8350_gpios 6 GPIO_ACTIVE_LOW>; |
| debounce-interval = <15>; |
| linux,can-disable; |
| wakeup-source; |
| }; |
| }; |
| |
| reserved-memory { |
| adsp_mem: memory@85700000 { |
| reg = <0x0 0x85700000 0x0 0x2800000>; |
| no-map; |
| }; |
| |
| video_mem: memory@9fd00000 { |
| reg = <0x0 0x9fd00000 0x0 0x700000>; |
| no-map; |
| }; |
| |
| rmtfs_mem: memory@f3300000 { |
| compatible = "qcom,rmtfs-mem"; |
| reg = <0x0 0xf3300000 0x0 0x280000>; |
| no-map; |
| |
| qcom,client-id = <1>; |
| qcom,vmid = <15>; |
| }; |
| |
| ramoops@ffc00000 { |
| compatible = "ramoops"; |
| reg = <0 0xffc00000 0 0x200000>; |
| console-size = <0x40000>; |
| record-size = <0x1000>; |
| ecc-size = <16>; |
| no-map; |
| }; |
| }; |
| |
| /* Sadly, the voltages for these GPIO regulators are unknown. */ |
| imx650_vana_regulator: imx650-vana-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "imx650_vana_regulator"; |
| gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&telec_pwr_en>; |
| }; |
| |
| vph_pwr: vph-pwr-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "vph_pwr"; |
| regulator-min-microvolt = <3700000>; |
| regulator-max-microvolt = <3700000>; |
| |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| }; |
| |
| &apps_rsc { |
| regulators-0 { |
| compatible = "qcom,pm8350-rpmh-regulators"; |
| qcom,pmic-id = "b"; |
| |
| vdd-s1-supply = <&vph_pwr>; |
| vdd-s2-supply = <&vph_pwr>; |
| vdd-s3-supply = <&vph_pwr>; |
| vdd-s4-supply = <&vph_pwr>; |
| vdd-s5-supply = <&vph_pwr>; |
| vdd-s6-supply = <&vph_pwr>; |
| vdd-s7-supply = <&vph_pwr>; |
| vdd-s8-supply = <&vph_pwr>; |
| vdd-s9-supply = <&vph_pwr>; |
| vdd-s10-supply = <&vph_pwr>; |
| vdd-s11-supply = <&vph_pwr>; |
| vdd-s12-supply = <&vph_pwr>; |
| |
| vdd-l1-l4-supply = <&pm8350_s11>; |
| vdd-l2-l7-supply = <&vreg_bob>; |
| vdd-l3-l5-supply = <&vreg_bob>; |
| vdd-l6-l9-l10-supply = <&pm8350_s12>; |
| |
| /* |
| * ARC regulators: |
| * s5 - gfx.lvl |
| * l8 - lcx.lvl |
| */ |
| |
| pm8350_s10: smps10 { |
| regulator-name = "pm8350_s10"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| pm8350_s11: smps11 { |
| regulator-name = "pm8350_s11"; |
| regulator-min-microvolt = <848000>; |
| regulator-max-microvolt = <1104000>; |
| }; |
| |
| pm8350_s12: smps12 { |
| regulator-name = "pm8350_s12"; |
| regulator-min-microvolt = <1224000>; |
| regulator-max-microvolt = <1400000>; |
| }; |
| |
| pm8350_l1: ldo1 { |
| regulator-name = "pm8350_l1"; |
| regulator-min-microvolt = <912000>; |
| regulator-max-microvolt = <920000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8350_l2: ldo2 { |
| regulator-name = "pm8350_l2"; |
| regulator-min-microvolt = <3072000>; |
| regulator-max-microvolt = <3072000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8350_l3: ldo3 { |
| regulator-name = "pm8350_l3"; |
| regulator-min-microvolt = <904000>; |
| regulator-max-microvolt = <904000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8350_l5: ldo5 { |
| regulator-name = "pm8350_l5"; |
| regulator-min-microvolt = <880000>; |
| regulator-max-microvolt = <912000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8350_l6: ldo6 { |
| regulator-name = "pm8350_l6"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8350_l7: ldo7 { |
| regulator-name = "pm8350_l7"; |
| regulator-min-microvolt = <2504000>; |
| regulator-max-microvolt = <2504000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8350_l9: ldo9 { |
| regulator-name = "pm8350_l9"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| |
| regulators-1 { |
| compatible = "qcom,pm8350c-rpmh-regulators"; |
| qcom,pmic-id = "c"; |
| |
| vdd-s1-supply = <&vph_pwr>; |
| vdd-s2-supply = <&vph_pwr>; |
| vdd-s3-supply = <&vph_pwr>; |
| vdd-s4-supply = <&vph_pwr>; |
| vdd-s5-supply = <&vph_pwr>; |
| vdd-s6-supply = <&vph_pwr>; |
| vdd-s7-supply = <&vph_pwr>; |
| vdd-s8-supply = <&vph_pwr>; |
| vdd-s9-supply = <&vph_pwr>; |
| vdd-s10-supply = <&vph_pwr>; |
| |
| vdd-l1-l12-supply = <&vreg_bob>; |
| vdd-l2-l8-supply = <&vreg_bob>; |
| vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; |
| vdd-l6-l9-l11-supply = <&vreg_bob>; |
| vdd-l10-supply = <&pm8350_s12>; |
| |
| vdd-bob-supply = <&vph_pwr>; |
| |
| /* |
| * ARC regulators: |
| * s2 - mxc.lvl |
| * s4 - mss.lvl |
| * s6 - cx.lvl |
| */ |
| |
| pm8350c_s1: smps1 { |
| regulator-name = "pm8350c_s1"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2024000>; |
| }; |
| |
| pm8350c_s10: smps10 { |
| regulator-name = "pm8350c_s10"; |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <1100000>; |
| }; |
| |
| vreg_bob: bob { |
| regulator-name = "vreg_bob"; |
| regulator-min-microvolt = <3400000>; |
| regulator-max-microvolt = <3960000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; |
| }; |
| |
| pm8350c_l1: ldo1 { |
| regulator-name = "pm8350c_l1"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8350c_l2: ldo2 { |
| regulator-name = "pm8350c_l2"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8350c_l3: ldo3 { |
| regulator-name = "pm8350c_l3"; |
| regulator-min-microvolt = <3296000>; |
| regulator-max-microvolt = <3304000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8350c_l4: ldo4 { |
| regulator-name = "pm8350c_l4"; |
| regulator-min-microvolt = <1704000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8350c_l5: ldo5 { |
| regulator-name = "pm8350c_l5"; |
| regulator-min-microvolt = <1704000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8350c_l6: ldo6 { |
| regulator-name = "pm8350c_l6"; |
| regulator-min-microvolt = <2960000>; |
| /* Originally max = 3008000 but SDHCI expects 2960000 */ |
| regulator-max-microvolt = <2960000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8350c_l7: ldo7 { |
| regulator-name = "pm8350c_l7"; |
| regulator-min-microvolt = <3008000>; |
| regulator-max-microvolt = <3008000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8350c_l8: ldo8 { |
| regulator-name = "pm8350c_l8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8350c_l9: ldo9 { |
| regulator-name = "pm8350c_l9"; |
| regulator-min-microvolt = <2960000>; |
| /* Originally max = 3008000 but SDHCI expects 2960000 */ |
| regulator-max-microvolt = <2960000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8350c_l10: ldo10 { |
| regulator-name = "pm8350c_l10"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8350c_l12: ldo12 { |
| regulator-name = "pm8350c_l12"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1968000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8350c_l13: ldo13 { |
| regulator-name = "pm8350c_l13"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| |
| regulators-2 { |
| compatible = "qcom,pm8450-rpmh-regulators"; |
| qcom,pmic-id = "h"; |
| |
| vdd-s1-supply = <&vph_pwr>; |
| vdd-s2-supply = <&vph_pwr>; |
| vdd-s3-supply = <&vph_pwr>; |
| vdd-s4-supply = <&vph_pwr>; |
| vdd-s5-supply = <&vph_pwr>; |
| vdd-s6-supply = <&vph_pwr>; |
| |
| vdd-l2-supply = <&vreg_bob>; |
| vdd-l3-supply = <&vreg_bob>; |
| vdd-l4-supply = <&vreg_bob>; |
| |
| /* |
| * ARC regulators: |
| * S2 - ebi.lvl |
| * S4 - mmcx.lvl |
| * S6 - mx.lvl |
| * L1 - lmx.lvl |
| */ |
| |
| pm8450_s3: smps3 { |
| regulator-name = "pm8450_s3"; |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <600000>; |
| }; |
| |
| pm8450_l2: ldo2 { |
| regulator-name = "pm8450_l2"; |
| regulator-min-microvolt = <880000>; |
| regulator-max-microvolt = <912000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| |
| pm8450_l3: ldo3 { |
| regulator-name = "pm8450_l3"; |
| regulator-min-microvolt = <912000>; |
| regulator-max-microvolt = <912000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; |
| }; |
| }; |
| |
| regulators-3 { |
| compatible = "qcom,pmr735a-rpmh-regulators"; |
| qcom,pmic-id = "e"; |
| |
| vdd-s1-supply = <&vph_pwr>; |
| vdd-s2-supply = <&vph_pwr>; |
| vdd-s3-supply = <&vph_pwr>; |
| |
| vdd-l1-l2-supply = <&pmr735a_s2>; |
| vdd-l3-supply = <&pmr735a_s1>; |
| vdd-l4-supply = <&pm8350c_s1>; |
| vdd-l5-l6-supply = <&pm8350c_s1>; |
| vdd-l7-bob-supply = <&vreg_bob>; |
| |
| pmr735a_s1: smps1 { |
| regulator-name = "pmr735a_s1"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1296000>; |
| }; |
| |
| pmr735a_s2: smps2 { |
| regulator-name = "pmr735a_s2"; |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1040000>; |
| }; |
| |
| pmr735a_s3: smps3 { |
| regulator-name = "pmr735a_s3"; |
| regulator-min-microvolt = <435000>; |
| regulator-max-microvolt = <2352000>; |
| }; |
| |
| pmr735a_l1: ldo1 { |
| regulator-name = "pmr735a_l1"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <800000>; |
| }; |
| |
| pmr735a_l2: ldo2 { |
| regulator-name = "pmr735a_l2"; |
| regulator-min-microvolt = <480000>; |
| regulator-max-microvolt = <912000>; |
| }; |
| |
| pmr735a_l3: ldo3 { |
| regulator-name = "pmr735a_l3"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| |
| pmr735a_l4: ldo4 { |
| regulator-name = "pmr735a_l4"; |
| regulator-min-microvolt = <1776000>; |
| regulator-max-microvolt = <1776000>; |
| }; |
| |
| pmr735a_l5: ldo5 { |
| regulator-name = "pmr735a_l5"; |
| regulator-min-microvolt = <880000>; |
| regulator-max-microvolt = <880000>; |
| }; |
| |
| pmr735a_l6: ldo6 { |
| regulator-name = "pmr735a_l6"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| |
| pmr735a_l7: ldo7 { |
| regulator-name = "pmr735a_l7"; |
| regulator-min-microvolt = <2800000>; |
| regulator-max-microvolt = <2800000>; |
| }; |
| }; |
| }; |
| |
| &gpi_dma0 { |
| status = "okay"; |
| }; |
| |
| &gpi_dma1 { |
| status = "okay"; |
| }; |
| |
| &gpi_dma2 { |
| status = "okay"; |
| }; |
| |
| &i2c4 { |
| clock-frequency = <400000>; |
| status = "okay"; |
| |
| touchscreen@48 { |
| compatible = "samsung,s6sy761"; |
| reg = <0x48>; |
| interrupt-parent = <&tlmm>; |
| interrupts = <21 0x2008>; |
| vdd-supply = <&pm8350c_l2>; |
| avdd-supply = <&pm8350c_l3>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&ts_reset_default &ts_int_default>; |
| }; |
| }; |
| |
| &i2c5 { |
| clock-frequency = <400000>; |
| status = "okay"; |
| |
| pmic@75 { |
| compatible = "dlg,slg51000"; |
| reg = <0x75>; |
| dlg,cs-gpios = <&pm8350b_gpios 1 GPIO_ACTIVE_HIGH>; |
| |
| pinctrl-names = "default"; |
| pinctrl-0 = <&cam_pwr_a_cs>; |
| |
| regulators { |
| slg51000_a_ldo1: ldo1 { |
| regulator-name = "slg51000_a_ldo1"; |
| regulator-min-microvolt = <2400000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| slg51000_a_ldo2: ldo2 { |
| regulator-name = "slg51000_a_ldo2"; |
| regulator-min-microvolt = <2400000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| slg51000_a_ldo3: ldo3 { |
| regulator-name = "slg51000_a_ldo3"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <3750000>; |
| }; |
| |
| slg51000_a_ldo4: ldo4 { |
| regulator-name = "slg51000_a_ldo4"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <3750000>; |
| }; |
| |
| slg51000_a_ldo5: ldo5 { |
| regulator-name = "slg51000_a_ldo5"; |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| |
| slg51000_a_ldo6: ldo6 { |
| regulator-name = "slg51000_a_ldo6"; |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| |
| slg51000_a_ldo7: ldo7 { |
| regulator-name = "slg51000_a_ldo7"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <3750000>; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c9 { |
| clock-frequency = <400000>; |
| status = "okay"; |
| |
| /* NXP SN1X0 NFC @ 28 */ |
| }; |
| |
| &i2c14 { |
| clock-frequency = <1000000>; |
| status = "okay"; |
| |
| cs35l41_l: speaker-amp@40 { |
| compatible = "cirrus,cs35l41"; |
| reg = <0x40>; |
| interrupt-parent = <&tlmm>; |
| interrupts = <182 IRQ_TYPE_LEVEL_LOW>; |
| reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; |
| cirrus,boost-peak-milliamp = <4000>; |
| cirrus,boost-ind-nanohenry = <1000>; |
| cirrus,boost-cap-microfarad = <15>; |
| cirrus,gpio2-src-select = <2>; |
| cirrus,gpio2-output-enable; |
| cirrus,asp-sdout-hiz = <3>; |
| #sound-dai-cells = <1>; |
| }; |
| |
| cs35l41_r: speaker-amp@41 { |
| compatible = "cirrus,cs35l41"; |
| reg = <0x41>; |
| interrupt-parent = <&tlmm>; |
| interrupts = <182 IRQ_TYPE_LEVEL_LOW>; |
| reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>; |
| cirrus,boost-peak-milliamp = <4000>; |
| cirrus,boost-ind-nanohenry = <1000>; |
| cirrus,boost-cap-microfarad = <15>; |
| cirrus,gpio2-src-select = <2>; |
| cirrus,gpio2-output-enable; |
| cirrus,asp-sdout-hiz = <3>; |
| #sound-dai-cells = <1>; |
| }; |
| }; |
| |
| &i2c15 { |
| clock-frequency = <400000>; |
| status = "okay"; |
| |
| /* AMS TCS3490 RGB+IR color sensor @ 72 */ |
| }; |
| |
| &i2c19 { |
| clock-frequency = <1000000>; |
| status = "okay"; |
| |
| /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */ |
| }; |
| |
| &pcie0 { |
| max-link-speed = <2>; |
| status = "okay"; |
| }; |
| |
| &pcie0_phy { |
| vdda-phy-supply = <&pm8350_l5>; |
| vdda-pll-supply = <&pm8350_l6>; |
| status = "okay"; |
| }; |
| |
| &pm8350_gpios { |
| gpio-line-names = "ASSIGN1_THERM", /* GPIO_1 */ |
| "LCD_ID", |
| "SDR_MMW_THERM", |
| "RF_ID", |
| "NC", |
| "VOL_DOWN_N", |
| "NC", |
| "NC", |
| "NC", |
| "PM8350_OPTION"; /* GPIO_10 */ |
| |
| vol_down_n: vol-down-n-state { |
| pins = "gpio6"; |
| function = "normal"; |
| power-source = <1>; |
| bias-pull-up; |
| input-enable; |
| }; |
| }; |
| |
| &pm8350b_gpios { |
| cam_pwr_a_cs: cam-pwr-a-cs-state { |
| pins = "gpio1"; |
| function = "normal"; |
| qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; |
| power-source = <1>; |
| drive-push-pull; |
| output-high; |
| }; |
| |
| snapshot_n: snapshot-n-state { |
| pins = "gpio5"; |
| function = "normal"; |
| power-source = <0>; |
| bias-pull-up; |
| input-enable; |
| }; |
| |
| focus_n: focus-n-state { |
| pins = "gpio8"; |
| function = "normal"; |
| power-source = <0>; |
| bias-pull-up; |
| input-enable; |
| }; |
| }; |
| |
| &pm8450_gpios { |
| gpio-line-names = "FP_LDO_EN", /* GPIO_1 */ |
| "", |
| "", |
| ""; |
| }; |
| |
| &pmk8350_gpios { |
| gpio-line-names = "NC", /* GPIO_1 */ |
| "NC", |
| "DISP_THERM", |
| "PMK8350_OPTION"; |
| }; |
| |
| &pon_pwrkey { |
| status = "okay"; |
| }; |
| |
| &pon_resin { |
| linux,code = <KEY_VOLUMEUP>; |
| status = "okay"; |
| }; |
| |
| &remoteproc_adsp { |
| firmware-name = "qcom/sm8450/Sony/nagara/adsp.mbn"; |
| status = "okay"; |
| }; |
| |
| &remoteproc_cdsp { |
| firmware-name = "qcom/sm8450/Sony/nagara/cdsp.mbn"; |
| status = "okay"; |
| }; |
| |
| &remoteproc_slpi { |
| firmware-name = "qcom/sm8450/Sony/nagara/slpi.mbn"; |
| status = "okay"; |
| }; |
| |
| &qupv3_id_0 { |
| status = "okay"; |
| }; |
| |
| &qupv3_id_1 { |
| status = "okay"; |
| }; |
| |
| &qupv3_id_2 { |
| status = "okay"; |
| }; |
| |
| &sdhc_2 { |
| cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; |
| pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>; |
| vmmc-supply = <&pm8350c_l9>; |
| vqmmc-supply = <&pm8350c_l6>; |
| no-sdio; |
| no-mmc; |
| status = "okay"; |
| }; |
| |
| &spi10 { |
| status = "okay"; |
| |
| /* NXP SN1X0 NFC Secure Element @ 0 */ |
| }; |
| |
| &tlmm { |
| gpio-reserved-ranges = <28 4>; |
| |
| ts_reset_default: ts-reset-default-state { |
| pins = "gpio20"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| output-high; |
| }; |
| |
| ts_int_default: ts-int-default-state { |
| pins = "gpio21"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| telec_pwr_en: telec-pwr-en-state { |
| pins = "gpio23"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-disable; |
| output-low; |
| }; |
| |
| sdc2_card_det_n: sd-card-det-n-state { |
| pins = "gpio92"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| }; |
| |
| &uart7 { |
| status = "okay"; |
| }; |
| |
| &usb_1 { |
| status = "okay"; |
| }; |
| |
| &usb_1_dwc3 { |
| dr_mode = "peripheral"; |
| }; |
| |
| &usb_1_hsphy { |
| vdda-pll-supply = <&pm8350_l5>; |
| vdda18-supply = <&pm8350c_l1>; |
| vdda33-supply = <&pm8350_l2>; |
| status = "okay"; |
| }; |
| |
| &usb_1_qmpphy { |
| vdda-phy-supply = <&pm8350_l6>; |
| vdda-pll-supply = <&pm8350_l1>; |
| status = "okay"; |
| }; |
