| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2013 Samsung Electronics Co., Ltd. |
| * Copyright (c) 2013 Linaro Ltd. |
| * |
| * This file contains the utility functions to register the pll clocks. |
| */ |
| |
| #include <linux/errno.h> |
| #include <linux/hrtimer.h> |
| #include <linux/iopoll.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/timekeeping.h> |
| #include <linux/clk-provider.h> |
| #include <linux/io.h> |
| #include "clk.h" |
| #include "clk-pll.h" |
| |
| #define PLL_TIMEOUT_US 20000U |
| #define PLL_TIMEOUT_LOOPS 1000000U |
| |
| struct samsung_clk_pll { |
| struct clk_hw hw; |
| void __iomem *lock_reg; |
| void __iomem *con_reg; |
| /* PLL enable control bit offset in @con_reg register */ |
| unsigned short enable_offs; |
| /* PLL lock status bit offset in @con_reg register */ |
| unsigned short lock_offs; |
| enum samsung_pll_type type; |
| unsigned int rate_count; |
| const struct samsung_pll_rate_table *rate_table; |
| }; |
| |
| #define to_clk_pll(_hw) container_of(_hw, struct samsung_clk_pll, hw) |
| |
| static const struct samsung_pll_rate_table *samsung_get_pll_settings( |
| struct samsung_clk_pll *pll, unsigned long rate) |
| { |
| const struct samsung_pll_rate_table *rate_table = pll->rate_table; |
| int i; |
| |
| for (i = 0; i < pll->rate_count; i++) { |
| if (rate == rate_table[i].rate) |
| return &rate_table[i]; |
| } |
| |
| return NULL; |
| } |
| |
| static long samsung_pll_round_rate(struct clk_hw *hw, |
| unsigned long drate, unsigned long *prate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| const struct samsung_pll_rate_table *rate_table = pll->rate_table; |
| int i; |
| |
| /* Assumming rate_table is in descending order */ |
| for (i = 0; i < pll->rate_count; i++) { |
| if (drate >= rate_table[i].rate) |
| return rate_table[i].rate; |
| } |
| |
| /* return minimum supported value */ |
| return rate_table[i - 1].rate; |
| } |
| |
| static bool pll_early_timeout = true; |
| |
| static int __init samsung_pll_disable_early_timeout(void) |
| { |
| pll_early_timeout = false; |
| return 0; |
| } |
| arch_initcall(samsung_pll_disable_early_timeout); |
| |
| /* Wait until the PLL is locked */ |
| static int samsung_pll_lock_wait(struct samsung_clk_pll *pll, |
| unsigned int reg_mask) |
| { |
| int i, ret; |
| u32 val; |
| |
| /* |
| * This function might be called when the timekeeping API can't be used |
| * to detect timeouts. One situation is when the clocksource is not yet |
| * initialized, another when the timekeeping is suspended. udelay() also |
| * cannot be used when the clocksource is not running on arm64, since |
| * the current timer is used as cycle counter. So a simple busy loop |
| * is used here in that special cases. The limit of iterations has been |
| * derived from experimental measurements of various PLLs on multiple |
| * Exynos SoC variants. Single register read time was usually in range |
| * 0.4...1.5 us, never less than 0.4 us. |
| */ |
| if (pll_early_timeout || timekeeping_suspended) { |
| i = PLL_TIMEOUT_LOOPS; |
| while (i-- > 0) { |
| if (readl_relaxed(pll->con_reg) & reg_mask) |
| return 0; |
| |
| cpu_relax(); |
| } |
| ret = -ETIMEDOUT; |
| } else { |
| ret = readl_relaxed_poll_timeout_atomic(pll->con_reg, val, |
| val & reg_mask, 0, PLL_TIMEOUT_US); |
| } |
| |
| if (ret < 0) |
| pr_err("Could not lock PLL %s\n", clk_hw_get_name(&pll->hw)); |
| |
| return ret; |
| } |
| |
| static int samsung_pll3xxx_enable(struct clk_hw *hw) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 tmp; |
| |
| tmp = readl_relaxed(pll->con_reg); |
| tmp |= BIT(pll->enable_offs); |
| writel_relaxed(tmp, pll->con_reg); |
| |
| return samsung_pll_lock_wait(pll, BIT(pll->lock_offs)); |
| } |
| |
| static void samsung_pll3xxx_disable(struct clk_hw *hw) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 tmp; |
| |
| tmp = readl_relaxed(pll->con_reg); |
| tmp &= ~BIT(pll->enable_offs); |
| writel_relaxed(tmp, pll->con_reg); |
| } |
| |
| /* |
| * PLL2126 Clock Type |
| */ |
| |
| #define PLL2126_MDIV_MASK (0xff) |
| #define PLL2126_PDIV_MASK (0x3f) |
| #define PLL2126_SDIV_MASK (0x3) |
| #define PLL2126_MDIV_SHIFT (16) |
| #define PLL2126_PDIV_SHIFT (8) |
| #define PLL2126_SDIV_SHIFT (0) |
| |
| static unsigned long samsung_pll2126_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 pll_con, mdiv, pdiv, sdiv; |
| u64 fvco = parent_rate; |
| |
| pll_con = readl_relaxed(pll->con_reg); |
| mdiv = (pll_con >> PLL2126_MDIV_SHIFT) & PLL2126_MDIV_MASK; |
| pdiv = (pll_con >> PLL2126_PDIV_SHIFT) & PLL2126_PDIV_MASK; |
| sdiv = (pll_con >> PLL2126_SDIV_SHIFT) & PLL2126_SDIV_MASK; |
| |
| fvco *= (mdiv + 8); |
| do_div(fvco, (pdiv + 2) << sdiv); |
| |
| return (unsigned long)fvco; |
| } |
| |
| static const struct clk_ops samsung_pll2126_clk_ops = { |
| .recalc_rate = samsung_pll2126_recalc_rate, |
| }; |
| |
| /* |
| * PLL3000 Clock Type |
| */ |
| |
| #define PLL3000_MDIV_MASK (0xff) |
| #define PLL3000_PDIV_MASK (0x3) |
| #define PLL3000_SDIV_MASK (0x3) |
| #define PLL3000_MDIV_SHIFT (16) |
| #define PLL3000_PDIV_SHIFT (8) |
| #define PLL3000_SDIV_SHIFT (0) |
| |
| static unsigned long samsung_pll3000_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 pll_con, mdiv, pdiv, sdiv; |
| u64 fvco = parent_rate; |
| |
| pll_con = readl_relaxed(pll->con_reg); |
| mdiv = (pll_con >> PLL3000_MDIV_SHIFT) & PLL3000_MDIV_MASK; |
| pdiv = (pll_con >> PLL3000_PDIV_SHIFT) & PLL3000_PDIV_MASK; |
| sdiv = (pll_con >> PLL3000_SDIV_SHIFT) & PLL3000_SDIV_MASK; |
| |
| fvco *= (2 * (mdiv + 8)); |
| do_div(fvco, pdiv << sdiv); |
| |
| return (unsigned long)fvco; |
| } |
| |
| static const struct clk_ops samsung_pll3000_clk_ops = { |
| .recalc_rate = samsung_pll3000_recalc_rate, |
| }; |
| |
| /* |
| * PLL35xx Clock Type |
| */ |
| /* Maximum lock time can be 270 * PDIV cycles */ |
| #define PLL35XX_LOCK_FACTOR (270) |
| |
| #define PLL35XX_MDIV_MASK (0x3FF) |
| #define PLL35XX_PDIV_MASK (0x3F) |
| #define PLL35XX_SDIV_MASK (0x7) |
| #define PLL35XX_MDIV_SHIFT (16) |
| #define PLL35XX_PDIV_SHIFT (8) |
| #define PLL35XX_SDIV_SHIFT (0) |
| #define PLL35XX_LOCK_STAT_SHIFT (29) |
| #define PLL35XX_ENABLE_SHIFT (31) |
| |
| static unsigned long samsung_pll35xx_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 mdiv, pdiv, sdiv, pll_con; |
| u64 fvco = parent_rate; |
| |
| pll_con = readl_relaxed(pll->con_reg); |
| mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK; |
| pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK; |
| sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK; |
| |
| fvco *= mdiv; |
| do_div(fvco, (pdiv << sdiv)); |
| |
| return (unsigned long)fvco; |
| } |
| |
| static inline bool samsung_pll35xx_mp_change( |
| const struct samsung_pll_rate_table *rate, u32 pll_con) |
| { |
| u32 old_mdiv, old_pdiv; |
| |
| old_mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK; |
| old_pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK; |
| |
| return (rate->mdiv != old_mdiv || rate->pdiv != old_pdiv); |
| } |
| |
| static int samsung_pll35xx_set_rate(struct clk_hw *hw, unsigned long drate, |
| unsigned long prate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| const struct samsung_pll_rate_table *rate; |
| u32 tmp; |
| |
| /* Get required rate settings from table */ |
| rate = samsung_get_pll_settings(pll, drate); |
| if (!rate) { |
| pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, |
| drate, clk_hw_get_name(hw)); |
| return -EINVAL; |
| } |
| |
| tmp = readl_relaxed(pll->con_reg); |
| |
| if (!(samsung_pll35xx_mp_change(rate, tmp))) { |
| /* If only s change, change just s value only*/ |
| tmp &= ~(PLL35XX_SDIV_MASK << PLL35XX_SDIV_SHIFT); |
| tmp |= rate->sdiv << PLL35XX_SDIV_SHIFT; |
| writel_relaxed(tmp, pll->con_reg); |
| |
| return 0; |
| } |
| |
| /* Set PLL lock time. */ |
| writel_relaxed(rate->pdiv * PLL35XX_LOCK_FACTOR, |
| pll->lock_reg); |
| |
| /* Change PLL PMS values */ |
| tmp &= ~((PLL35XX_MDIV_MASK << PLL35XX_MDIV_SHIFT) | |
| (PLL35XX_PDIV_MASK << PLL35XX_PDIV_SHIFT) | |
| (PLL35XX_SDIV_MASK << PLL35XX_SDIV_SHIFT)); |
| tmp |= (rate->mdiv << PLL35XX_MDIV_SHIFT) | |
| (rate->pdiv << PLL35XX_PDIV_SHIFT) | |
| (rate->sdiv << PLL35XX_SDIV_SHIFT); |
| writel_relaxed(tmp, pll->con_reg); |
| |
| /* Wait for PLL lock if the PLL is enabled */ |
| if (tmp & BIT(pll->enable_offs)) |
| return samsung_pll_lock_wait(pll, BIT(pll->lock_offs)); |
| |
| return 0; |
| } |
| |
| static const struct clk_ops samsung_pll35xx_clk_ops = { |
| .recalc_rate = samsung_pll35xx_recalc_rate, |
| .round_rate = samsung_pll_round_rate, |
| .set_rate = samsung_pll35xx_set_rate, |
| .enable = samsung_pll3xxx_enable, |
| .disable = samsung_pll3xxx_disable, |
| }; |
| |
| static const struct clk_ops samsung_pll35xx_clk_min_ops = { |
| .recalc_rate = samsung_pll35xx_recalc_rate, |
| }; |
| |
| /* |
| * PLL36xx Clock Type |
| */ |
| /* Maximum lock time can be 3000 * PDIV cycles */ |
| #define PLL36XX_LOCK_FACTOR (3000) |
| |
| #define PLL36XX_KDIV_MASK (0xFFFF) |
| #define PLL36XX_MDIV_MASK (0x1FF) |
| #define PLL36XX_PDIV_MASK (0x3F) |
| #define PLL36XX_SDIV_MASK (0x7) |
| #define PLL36XX_MDIV_SHIFT (16) |
| #define PLL36XX_PDIV_SHIFT (8) |
| #define PLL36XX_SDIV_SHIFT (0) |
| #define PLL36XX_KDIV_SHIFT (0) |
| #define PLL36XX_LOCK_STAT_SHIFT (29) |
| #define PLL36XX_ENABLE_SHIFT (31) |
| |
| static unsigned long samsung_pll36xx_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 mdiv, pdiv, sdiv, pll_con0, pll_con1; |
| s16 kdiv; |
| u64 fvco = parent_rate; |
| |
| pll_con0 = readl_relaxed(pll->con_reg); |
| pll_con1 = readl_relaxed(pll->con_reg + 4); |
| mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK; |
| pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK; |
| sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK; |
| kdiv = (s16)(pll_con1 & PLL36XX_KDIV_MASK); |
| |
| fvco *= (mdiv << 16) + kdiv; |
| do_div(fvco, (pdiv << sdiv)); |
| fvco >>= 16; |
| |
| return (unsigned long)fvco; |
| } |
| |
| static inline bool samsung_pll36xx_mpk_change( |
| const struct samsung_pll_rate_table *rate, u32 pll_con0, u32 pll_con1) |
| { |
| u32 old_mdiv, old_pdiv, old_kdiv; |
| |
| old_mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK; |
| old_pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK; |
| old_kdiv = (pll_con1 >> PLL36XX_KDIV_SHIFT) & PLL36XX_KDIV_MASK; |
| |
| return (rate->mdiv != old_mdiv || rate->pdiv != old_pdiv || |
| rate->kdiv != old_kdiv); |
| } |
| |
| static int samsung_pll36xx_set_rate(struct clk_hw *hw, unsigned long drate, |
| unsigned long parent_rate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 pll_con0, pll_con1; |
| const struct samsung_pll_rate_table *rate; |
| |
| rate = samsung_get_pll_settings(pll, drate); |
| if (!rate) { |
| pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, |
| drate, clk_hw_get_name(hw)); |
| return -EINVAL; |
| } |
| |
| pll_con0 = readl_relaxed(pll->con_reg); |
| pll_con1 = readl_relaxed(pll->con_reg + 4); |
| |
| if (!(samsung_pll36xx_mpk_change(rate, pll_con0, pll_con1))) { |
| /* If only s change, change just s value only*/ |
| pll_con0 &= ~(PLL36XX_SDIV_MASK << PLL36XX_SDIV_SHIFT); |
| pll_con0 |= (rate->sdiv << PLL36XX_SDIV_SHIFT); |
| writel_relaxed(pll_con0, pll->con_reg); |
| |
| return 0; |
| } |
| |
| /* Set PLL lock time. */ |
| writel_relaxed(rate->pdiv * PLL36XX_LOCK_FACTOR, pll->lock_reg); |
| |
| /* Change PLL PMS values */ |
| pll_con0 &= ~((PLL36XX_MDIV_MASK << PLL36XX_MDIV_SHIFT) | |
| (PLL36XX_PDIV_MASK << PLL36XX_PDIV_SHIFT) | |
| (PLL36XX_SDIV_MASK << PLL36XX_SDIV_SHIFT)); |
| pll_con0 |= (rate->mdiv << PLL36XX_MDIV_SHIFT) | |
| (rate->pdiv << PLL36XX_PDIV_SHIFT) | |
| (rate->sdiv << PLL36XX_SDIV_SHIFT); |
| writel_relaxed(pll_con0, pll->con_reg); |
| |
| pll_con1 &= ~(PLL36XX_KDIV_MASK << PLL36XX_KDIV_SHIFT); |
| pll_con1 |= rate->kdiv << PLL36XX_KDIV_SHIFT; |
| writel_relaxed(pll_con1, pll->con_reg + 4); |
| |
| if (pll_con0 & BIT(pll->enable_offs)) |
| return samsung_pll_lock_wait(pll, BIT(pll->lock_offs)); |
| |
| return 0; |
| } |
| |
| static const struct clk_ops samsung_pll36xx_clk_ops = { |
| .recalc_rate = samsung_pll36xx_recalc_rate, |
| .set_rate = samsung_pll36xx_set_rate, |
| .round_rate = samsung_pll_round_rate, |
| .enable = samsung_pll3xxx_enable, |
| .disable = samsung_pll3xxx_disable, |
| }; |
| |
| static const struct clk_ops samsung_pll36xx_clk_min_ops = { |
| .recalc_rate = samsung_pll36xx_recalc_rate, |
| }; |
| |
| /* |
| * PLL0822x Clock Type |
| */ |
| /* Maximum lock time can be 150 * PDIV cycles */ |
| #define PLL0822X_LOCK_FACTOR (150) |
| |
| #define PLL0822X_MDIV_MASK (0x3FF) |
| #define PLL0822X_PDIV_MASK (0x3F) |
| #define PLL0822X_SDIV_MASK (0x7) |
| #define PLL0822X_MDIV_SHIFT (16) |
| #define PLL0822X_PDIV_SHIFT (8) |
| #define PLL0822X_SDIV_SHIFT (0) |
| #define PLL0822X_LOCK_STAT_SHIFT (29) |
| #define PLL0822X_ENABLE_SHIFT (31) |
| |
| static unsigned long samsung_pll0822x_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 mdiv, pdiv, sdiv, pll_con3; |
| u64 fvco = parent_rate; |
| |
| pll_con3 = readl_relaxed(pll->con_reg); |
| mdiv = (pll_con3 >> PLL0822X_MDIV_SHIFT) & PLL0822X_MDIV_MASK; |
| pdiv = (pll_con3 >> PLL0822X_PDIV_SHIFT) & PLL0822X_PDIV_MASK; |
| sdiv = (pll_con3 >> PLL0822X_SDIV_SHIFT) & PLL0822X_SDIV_MASK; |
| |
| fvco *= mdiv; |
| do_div(fvco, (pdiv << sdiv)); |
| |
| return (unsigned long)fvco; |
| } |
| |
| static int samsung_pll0822x_set_rate(struct clk_hw *hw, unsigned long drate, |
| unsigned long prate) |
| { |
| const struct samsung_pll_rate_table *rate; |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 pll_con3; |
| |
| /* Get required rate settings from table */ |
| rate = samsung_get_pll_settings(pll, drate); |
| if (!rate) { |
| pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, |
| drate, clk_hw_get_name(hw)); |
| return -EINVAL; |
| } |
| |
| /* Change PLL PMS values */ |
| pll_con3 = readl_relaxed(pll->con_reg); |
| pll_con3 &= ~((PLL0822X_MDIV_MASK << PLL0822X_MDIV_SHIFT) | |
| (PLL0822X_PDIV_MASK << PLL0822X_PDIV_SHIFT) | |
| (PLL0822X_SDIV_MASK << PLL0822X_SDIV_SHIFT)); |
| pll_con3 |= (rate->mdiv << PLL0822X_MDIV_SHIFT) | |
| (rate->pdiv << PLL0822X_PDIV_SHIFT) | |
| (rate->sdiv << PLL0822X_SDIV_SHIFT); |
| |
| /* Set PLL lock time */ |
| writel_relaxed(rate->pdiv * PLL0822X_LOCK_FACTOR, |
| pll->lock_reg); |
| |
| /* Write PMS values */ |
| writel_relaxed(pll_con3, pll->con_reg); |
| |
| /* Wait for PLL lock if the PLL is enabled */ |
| if (pll_con3 & BIT(pll->enable_offs)) |
| return samsung_pll_lock_wait(pll, BIT(pll->lock_offs)); |
| |
| return 0; |
| } |
| |
| static const struct clk_ops samsung_pll0822x_clk_ops = { |
| .recalc_rate = samsung_pll0822x_recalc_rate, |
| .round_rate = samsung_pll_round_rate, |
| .set_rate = samsung_pll0822x_set_rate, |
| .enable = samsung_pll3xxx_enable, |
| .disable = samsung_pll3xxx_disable, |
| }; |
| |
| static const struct clk_ops samsung_pll0822x_clk_min_ops = { |
| .recalc_rate = samsung_pll0822x_recalc_rate, |
| }; |
| |
| /* |
| * PLL0831x Clock Type |
| */ |
| /* Maximum lock time can be 500 * PDIV cycles */ |
| #define PLL0831X_LOCK_FACTOR (500) |
| |
| #define PLL0831X_KDIV_MASK (0xFFFF) |
| #define PLL0831X_MDIV_MASK (0x1FF) |
| #define PLL0831X_PDIV_MASK (0x3F) |
| #define PLL0831X_SDIV_MASK (0x7) |
| #define PLL0831X_MDIV_SHIFT (16) |
| #define PLL0831X_PDIV_SHIFT (8) |
| #define PLL0831X_SDIV_SHIFT (0) |
| #define PLL0831X_KDIV_SHIFT (0) |
| #define PLL0831X_LOCK_STAT_SHIFT (29) |
| #define PLL0831X_ENABLE_SHIFT (31) |
| |
| static unsigned long samsung_pll0831x_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 mdiv, pdiv, sdiv, pll_con3, pll_con5; |
| s16 kdiv; |
| u64 fvco = parent_rate; |
| |
| pll_con3 = readl_relaxed(pll->con_reg); |
| pll_con5 = readl_relaxed(pll->con_reg + 8); |
| mdiv = (pll_con3 >> PLL0831X_MDIV_SHIFT) & PLL0831X_MDIV_MASK; |
| pdiv = (pll_con3 >> PLL0831X_PDIV_SHIFT) & PLL0831X_PDIV_MASK; |
| sdiv = (pll_con3 >> PLL0831X_SDIV_SHIFT) & PLL0831X_SDIV_MASK; |
| kdiv = (s16)((pll_con5 >> PLL0831X_KDIV_SHIFT) & PLL0831X_KDIV_MASK); |
| |
| fvco *= (mdiv << 16) + kdiv; |
| do_div(fvco, (pdiv << sdiv)); |
| fvco >>= 16; |
| |
| return (unsigned long)fvco; |
| } |
| |
| static int samsung_pll0831x_set_rate(struct clk_hw *hw, unsigned long drate, |
| unsigned long parent_rate) |
| { |
| const struct samsung_pll_rate_table *rate; |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 pll_con3, pll_con5; |
| |
| /* Get required rate settings from table */ |
| rate = samsung_get_pll_settings(pll, drate); |
| if (!rate) { |
| pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, |
| drate, clk_hw_get_name(hw)); |
| return -EINVAL; |
| } |
| |
| pll_con3 = readl_relaxed(pll->con_reg); |
| pll_con5 = readl_relaxed(pll->con_reg + 8); |
| |
| /* Change PLL PMSK values */ |
| pll_con3 &= ~((PLL0831X_MDIV_MASK << PLL0831X_MDIV_SHIFT) | |
| (PLL0831X_PDIV_MASK << PLL0831X_PDIV_SHIFT) | |
| (PLL0831X_SDIV_MASK << PLL0831X_SDIV_SHIFT)); |
| pll_con3 |= (rate->mdiv << PLL0831X_MDIV_SHIFT) | |
| (rate->pdiv << PLL0831X_PDIV_SHIFT) | |
| (rate->sdiv << PLL0831X_SDIV_SHIFT); |
| pll_con5 &= ~(PLL0831X_KDIV_MASK << PLL0831X_KDIV_SHIFT); |
| /* |
| * kdiv is 16-bit 2's complement (s16), but stored as unsigned int. |
| * Cast it to u16 to avoid leading 0xffff's in case of negative value. |
| */ |
| pll_con5 |= ((u16)rate->kdiv << PLL0831X_KDIV_SHIFT); |
| |
| /* Set PLL lock time */ |
| writel_relaxed(rate->pdiv * PLL0831X_LOCK_FACTOR, pll->lock_reg); |
| |
| /* Write PMSK values */ |
| writel_relaxed(pll_con3, pll->con_reg); |
| writel_relaxed(pll_con5, pll->con_reg + 8); |
| |
| /* Wait for PLL lock if the PLL is enabled */ |
| if (pll_con3 & BIT(pll->enable_offs)) |
| return samsung_pll_lock_wait(pll, BIT(pll->lock_offs)); |
| |
| return 0; |
| } |
| |
| static const struct clk_ops samsung_pll0831x_clk_ops = { |
| .recalc_rate = samsung_pll0831x_recalc_rate, |
| .set_rate = samsung_pll0831x_set_rate, |
| .round_rate = samsung_pll_round_rate, |
| .enable = samsung_pll3xxx_enable, |
| .disable = samsung_pll3xxx_disable, |
| }; |
| |
| static const struct clk_ops samsung_pll0831x_clk_min_ops = { |
| .recalc_rate = samsung_pll0831x_recalc_rate, |
| }; |
| |
| /* |
| * PLL45xx Clock Type |
| */ |
| #define PLL4502_LOCK_FACTOR 400 |
| #define PLL4508_LOCK_FACTOR 240 |
| |
| #define PLL45XX_MDIV_MASK (0x3FF) |
| #define PLL45XX_PDIV_MASK (0x3F) |
| #define PLL45XX_SDIV_MASK (0x7) |
| #define PLL45XX_AFC_MASK (0x1F) |
| #define PLL45XX_MDIV_SHIFT (16) |
| #define PLL45XX_PDIV_SHIFT (8) |
| #define PLL45XX_SDIV_SHIFT (0) |
| #define PLL45XX_AFC_SHIFT (0) |
| |
| #define PLL45XX_ENABLE BIT(31) |
| #define PLL45XX_LOCKED BIT(29) |
| |
| static unsigned long samsung_pll45xx_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 mdiv, pdiv, sdiv, pll_con; |
| u64 fvco = parent_rate; |
| |
| pll_con = readl_relaxed(pll->con_reg); |
| mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK; |
| pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK; |
| sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK; |
| |
| if (pll->type == pll_4508) |
| sdiv = sdiv - 1; |
| |
| fvco *= mdiv; |
| do_div(fvco, (pdiv << sdiv)); |
| |
| return (unsigned long)fvco; |
| } |
| |
| static bool samsung_pll45xx_mp_change(u32 pll_con0, u32 pll_con1, |
| const struct samsung_pll_rate_table *rate) |
| { |
| u32 old_mdiv, old_pdiv, old_afc; |
| |
| old_mdiv = (pll_con0 >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK; |
| old_pdiv = (pll_con0 >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK; |
| old_afc = (pll_con1 >> PLL45XX_AFC_SHIFT) & PLL45XX_AFC_MASK; |
| |
| return (old_mdiv != rate->mdiv || old_pdiv != rate->pdiv |
| || old_afc != rate->afc); |
| } |
| |
| static int samsung_pll45xx_set_rate(struct clk_hw *hw, unsigned long drate, |
| unsigned long prate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| const struct samsung_pll_rate_table *rate; |
| u32 con0, con1; |
| |
| /* Get required rate settings from table */ |
| rate = samsung_get_pll_settings(pll, drate); |
| if (!rate) { |
| pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, |
| drate, clk_hw_get_name(hw)); |
| return -EINVAL; |
| } |
| |
| con0 = readl_relaxed(pll->con_reg); |
| con1 = readl_relaxed(pll->con_reg + 0x4); |
| |
| if (!(samsung_pll45xx_mp_change(con0, con1, rate))) { |
| /* If only s change, change just s value only*/ |
| con0 &= ~(PLL45XX_SDIV_MASK << PLL45XX_SDIV_SHIFT); |
| con0 |= rate->sdiv << PLL45XX_SDIV_SHIFT; |
| writel_relaxed(con0, pll->con_reg); |
| |
| return 0; |
| } |
| |
| /* Set PLL PMS values. */ |
| con0 &= ~((PLL45XX_MDIV_MASK << PLL45XX_MDIV_SHIFT) | |
| (PLL45XX_PDIV_MASK << PLL45XX_PDIV_SHIFT) | |
| (PLL45XX_SDIV_MASK << PLL45XX_SDIV_SHIFT)); |
| con0 |= (rate->mdiv << PLL45XX_MDIV_SHIFT) | |
| (rate->pdiv << PLL45XX_PDIV_SHIFT) | |
| (rate->sdiv << PLL45XX_SDIV_SHIFT); |
| |
| /* Set PLL AFC value. */ |
| con1 = readl_relaxed(pll->con_reg + 0x4); |
| con1 &= ~(PLL45XX_AFC_MASK << PLL45XX_AFC_SHIFT); |
| con1 |= (rate->afc << PLL45XX_AFC_SHIFT); |
| |
| /* Set PLL lock time. */ |
| switch (pll->type) { |
| case pll_4502: |
| writel_relaxed(rate->pdiv * PLL4502_LOCK_FACTOR, pll->lock_reg); |
| break; |
| case pll_4508: |
| writel_relaxed(rate->pdiv * PLL4508_LOCK_FACTOR, pll->lock_reg); |
| break; |
| default: |
| break; |
| } |
| |
| /* Set new configuration. */ |
| writel_relaxed(con1, pll->con_reg + 0x4); |
| writel_relaxed(con0, pll->con_reg); |
| |
| /* Wait for PLL lock */ |
| return samsung_pll_lock_wait(pll, PLL45XX_LOCKED); |
| } |
| |
| static const struct clk_ops samsung_pll45xx_clk_ops = { |
| .recalc_rate = samsung_pll45xx_recalc_rate, |
| .round_rate = samsung_pll_round_rate, |
| .set_rate = samsung_pll45xx_set_rate, |
| }; |
| |
| static const struct clk_ops samsung_pll45xx_clk_min_ops = { |
| .recalc_rate = samsung_pll45xx_recalc_rate, |
| }; |
| |
| /* |
| * PLL46xx Clock Type |
| */ |
| #define PLL46XX_LOCK_FACTOR 3000 |
| |
| #define PLL46XX_VSEL_MASK (1) |
| #define PLL46XX_MDIV_MASK (0x1FF) |
| #define PLL1460X_MDIV_MASK (0x3FF) |
| |
| #define PLL46XX_PDIV_MASK (0x3F) |
| #define PLL46XX_SDIV_MASK (0x7) |
| #define PLL46XX_VSEL_SHIFT (27) |
| #define PLL46XX_MDIV_SHIFT (16) |
| #define PLL46XX_PDIV_SHIFT (8) |
| #define PLL46XX_SDIV_SHIFT (0) |
| |
| #define PLL46XX_KDIV_MASK (0xFFFF) |
| #define PLL4650C_KDIV_MASK (0xFFF) |
| #define PLL46XX_KDIV_SHIFT (0) |
| #define PLL46XX_MFR_MASK (0x3F) |
| #define PLL46XX_MRR_MASK (0x1F) |
| #define PLL46XX_KDIV_SHIFT (0) |
| #define PLL46XX_MFR_SHIFT (16) |
| #define PLL46XX_MRR_SHIFT (24) |
| |
| #define PLL46XX_ENABLE BIT(31) |
| #define PLL46XX_LOCKED BIT(29) |
| #define PLL46XX_VSEL BIT(27) |
| |
| static unsigned long samsung_pll46xx_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 mdiv, pdiv, sdiv, kdiv, pll_con0, pll_con1, shift; |
| u64 fvco = parent_rate; |
| |
| pll_con0 = readl_relaxed(pll->con_reg); |
| pll_con1 = readl_relaxed(pll->con_reg + 4); |
| mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & ((pll->type == pll_1460x) ? |
| PLL1460X_MDIV_MASK : PLL46XX_MDIV_MASK); |
| pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK; |
| sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK; |
| kdiv = pll->type == pll_4650c ? pll_con1 & PLL4650C_KDIV_MASK : |
| pll_con1 & PLL46XX_KDIV_MASK; |
| |
| shift = ((pll->type == pll_4600) || (pll->type == pll_1460x)) ? 16 : 10; |
| |
| fvco *= (mdiv << shift) + kdiv; |
| do_div(fvco, (pdiv << sdiv)); |
| fvco >>= shift; |
| |
| return (unsigned long)fvco; |
| } |
| |
| static bool samsung_pll46xx_mpk_change(u32 pll_con0, u32 pll_con1, |
| const struct samsung_pll_rate_table *rate) |
| { |
| u32 old_mdiv, old_pdiv, old_kdiv; |
| |
| old_mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK; |
| old_pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK; |
| old_kdiv = (pll_con1 >> PLL46XX_KDIV_SHIFT) & PLL46XX_KDIV_MASK; |
| |
| return (old_mdiv != rate->mdiv || old_pdiv != rate->pdiv |
| || old_kdiv != rate->kdiv); |
| } |
| |
| static int samsung_pll46xx_set_rate(struct clk_hw *hw, unsigned long drate, |
| unsigned long prate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| const struct samsung_pll_rate_table *rate; |
| u32 con0, con1, lock; |
| |
| /* Get required rate settings from table */ |
| rate = samsung_get_pll_settings(pll, drate); |
| if (!rate) { |
| pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, |
| drate, clk_hw_get_name(hw)); |
| return -EINVAL; |
| } |
| |
| con0 = readl_relaxed(pll->con_reg); |
| con1 = readl_relaxed(pll->con_reg + 0x4); |
| |
| if (!(samsung_pll46xx_mpk_change(con0, con1, rate))) { |
| /* If only s change, change just s value only*/ |
| con0 &= ~(PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT); |
| con0 |= rate->sdiv << PLL46XX_SDIV_SHIFT; |
| writel_relaxed(con0, pll->con_reg); |
| |
| return 0; |
| } |
| |
| /* Set PLL lock time. */ |
| lock = rate->pdiv * PLL46XX_LOCK_FACTOR; |
| if (lock > 0xffff) |
| /* Maximum lock time bitfield is 16-bit. */ |
| lock = 0xffff; |
| |
| /* Set PLL PMS and VSEL values. */ |
| if (pll->type == pll_1460x) { |
| con0 &= ~((PLL1460X_MDIV_MASK << PLL46XX_MDIV_SHIFT) | |
| (PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT) | |
| (PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT)); |
| } else { |
| con0 &= ~((PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT) | |
| (PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT) | |
| (PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT) | |
| (PLL46XX_VSEL_MASK << PLL46XX_VSEL_SHIFT)); |
| con0 |= rate->vsel << PLL46XX_VSEL_SHIFT; |
| } |
| |
| con0 |= (rate->mdiv << PLL46XX_MDIV_SHIFT) | |
| (rate->pdiv << PLL46XX_PDIV_SHIFT) | |
| (rate->sdiv << PLL46XX_SDIV_SHIFT); |
| |
| /* Set PLL K, MFR and MRR values. */ |
| con1 = readl_relaxed(pll->con_reg + 0x4); |
| con1 &= ~((PLL46XX_KDIV_MASK << PLL46XX_KDIV_SHIFT) | |
| (PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT) | |
| (PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT)); |
| con1 |= (rate->kdiv << PLL46XX_KDIV_SHIFT) | |
| (rate->mfr << PLL46XX_MFR_SHIFT) | |
| (rate->mrr << PLL46XX_MRR_SHIFT); |
| |
| /* Write configuration to PLL */ |
| writel_relaxed(lock, pll->lock_reg); |
| writel_relaxed(con0, pll->con_reg); |
| writel_relaxed(con1, pll->con_reg + 0x4); |
| |
| /* Wait for PLL lock */ |
| return samsung_pll_lock_wait(pll, PLL46XX_LOCKED); |
| } |
| |
| static const struct clk_ops samsung_pll46xx_clk_ops = { |
| .recalc_rate = samsung_pll46xx_recalc_rate, |
| .round_rate = samsung_pll_round_rate, |
| .set_rate = samsung_pll46xx_set_rate, |
| }; |
| |
| static const struct clk_ops samsung_pll46xx_clk_min_ops = { |
| .recalc_rate = samsung_pll46xx_recalc_rate, |
| }; |
| |
| /* |
| * PLL6552 Clock Type |
| */ |
| |
| #define PLL6552_MDIV_MASK 0x3ff |
| #define PLL6552_PDIV_MASK 0x3f |
| #define PLL6552_SDIV_MASK 0x7 |
| #define PLL6552_MDIV_SHIFT 16 |
| #define PLL6552_MDIV_SHIFT_2416 14 |
| #define PLL6552_PDIV_SHIFT 8 |
| #define PLL6552_PDIV_SHIFT_2416 5 |
| #define PLL6552_SDIV_SHIFT 0 |
| |
| static unsigned long samsung_pll6552_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 mdiv, pdiv, sdiv, pll_con; |
| u64 fvco = parent_rate; |
| |
| pll_con = readl_relaxed(pll->con_reg); |
| if (pll->type == pll_6552_s3c2416) { |
| mdiv = (pll_con >> PLL6552_MDIV_SHIFT_2416) & PLL6552_MDIV_MASK; |
| pdiv = (pll_con >> PLL6552_PDIV_SHIFT_2416) & PLL6552_PDIV_MASK; |
| } else { |
| mdiv = (pll_con >> PLL6552_MDIV_SHIFT) & PLL6552_MDIV_MASK; |
| pdiv = (pll_con >> PLL6552_PDIV_SHIFT) & PLL6552_PDIV_MASK; |
| } |
| sdiv = (pll_con >> PLL6552_SDIV_SHIFT) & PLL6552_SDIV_MASK; |
| |
| fvco *= mdiv; |
| do_div(fvco, (pdiv << sdiv)); |
| |
| return (unsigned long)fvco; |
| } |
| |
| static const struct clk_ops samsung_pll6552_clk_ops = { |
| .recalc_rate = samsung_pll6552_recalc_rate, |
| }; |
| |
| /* |
| * PLL6553 Clock Type |
| */ |
| |
| #define PLL6553_MDIV_MASK 0xff |
| #define PLL6553_PDIV_MASK 0x3f |
| #define PLL6553_SDIV_MASK 0x7 |
| #define PLL6553_KDIV_MASK 0xffff |
| #define PLL6553_MDIV_SHIFT 16 |
| #define PLL6553_PDIV_SHIFT 8 |
| #define PLL6553_SDIV_SHIFT 0 |
| #define PLL6553_KDIV_SHIFT 0 |
| |
| static unsigned long samsung_pll6553_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 mdiv, pdiv, sdiv, kdiv, pll_con0, pll_con1; |
| u64 fvco = parent_rate; |
| |
| pll_con0 = readl_relaxed(pll->con_reg); |
| pll_con1 = readl_relaxed(pll->con_reg + 0x4); |
| mdiv = (pll_con0 >> PLL6553_MDIV_SHIFT) & PLL6553_MDIV_MASK; |
| pdiv = (pll_con0 >> PLL6553_PDIV_SHIFT) & PLL6553_PDIV_MASK; |
| sdiv = (pll_con0 >> PLL6553_SDIV_SHIFT) & PLL6553_SDIV_MASK; |
| kdiv = (pll_con1 >> PLL6553_KDIV_SHIFT) & PLL6553_KDIV_MASK; |
| |
| fvco *= (mdiv << 16) + kdiv; |
| do_div(fvco, (pdiv << sdiv)); |
| fvco >>= 16; |
| |
| return (unsigned long)fvco; |
| } |
| |
| static const struct clk_ops samsung_pll6553_clk_ops = { |
| .recalc_rate = samsung_pll6553_recalc_rate, |
| }; |
| |
| /* |
| * PLL2550x Clock Type |
| */ |
| |
| #define PLL2550X_R_MASK (0x1) |
| #define PLL2550X_P_MASK (0x3F) |
| #define PLL2550X_M_MASK (0x3FF) |
| #define PLL2550X_S_MASK (0x7) |
| #define PLL2550X_R_SHIFT (20) |
| #define PLL2550X_P_SHIFT (14) |
| #define PLL2550X_M_SHIFT (4) |
| #define PLL2550X_S_SHIFT (0) |
| |
| static unsigned long samsung_pll2550x_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 r, p, m, s, pll_stat; |
| u64 fvco = parent_rate; |
| |
| pll_stat = readl_relaxed(pll->con_reg); |
| r = (pll_stat >> PLL2550X_R_SHIFT) & PLL2550X_R_MASK; |
| if (!r) |
| return 0; |
| p = (pll_stat >> PLL2550X_P_SHIFT) & PLL2550X_P_MASK; |
| m = (pll_stat >> PLL2550X_M_SHIFT) & PLL2550X_M_MASK; |
| s = (pll_stat >> PLL2550X_S_SHIFT) & PLL2550X_S_MASK; |
| |
| fvco *= m; |
| do_div(fvco, (p << s)); |
| |
| return (unsigned long)fvco; |
| } |
| |
| static const struct clk_ops samsung_pll2550x_clk_ops = { |
| .recalc_rate = samsung_pll2550x_recalc_rate, |
| }; |
| |
| /* |
| * PLL2550xx Clock Type |
| */ |
| |
| /* Maximum lock time can be 270 * PDIV cycles */ |
| #define PLL2550XX_LOCK_FACTOR 270 |
| |
| #define PLL2550XX_M_MASK 0x3FF |
| #define PLL2550XX_P_MASK 0x3F |
| #define PLL2550XX_S_MASK 0x7 |
| #define PLL2550XX_LOCK_STAT_MASK 0x1 |
| #define PLL2550XX_M_SHIFT 9 |
| #define PLL2550XX_P_SHIFT 3 |
| #define PLL2550XX_S_SHIFT 0 |
| #define PLL2550XX_LOCK_STAT_SHIFT 21 |
| |
| static unsigned long samsung_pll2550xx_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 mdiv, pdiv, sdiv, pll_con; |
| u64 fvco = parent_rate; |
| |
| pll_con = readl_relaxed(pll->con_reg); |
| mdiv = (pll_con >> PLL2550XX_M_SHIFT) & PLL2550XX_M_MASK; |
| pdiv = (pll_con >> PLL2550XX_P_SHIFT) & PLL2550XX_P_MASK; |
| sdiv = (pll_con >> PLL2550XX_S_SHIFT) & PLL2550XX_S_MASK; |
| |
| fvco *= mdiv; |
| do_div(fvco, (pdiv << sdiv)); |
| |
| return (unsigned long)fvco; |
| } |
| |
| static inline bool samsung_pll2550xx_mp_change(u32 mdiv, u32 pdiv, u32 pll_con) |
| { |
| u32 old_mdiv, old_pdiv; |
| |
| old_mdiv = (pll_con >> PLL2550XX_M_SHIFT) & PLL2550XX_M_MASK; |
| old_pdiv = (pll_con >> PLL2550XX_P_SHIFT) & PLL2550XX_P_MASK; |
| |
| return mdiv != old_mdiv || pdiv != old_pdiv; |
| } |
| |
| static int samsung_pll2550xx_set_rate(struct clk_hw *hw, unsigned long drate, |
| unsigned long prate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| const struct samsung_pll_rate_table *rate; |
| u32 tmp; |
| |
| /* Get required rate settings from table */ |
| rate = samsung_get_pll_settings(pll, drate); |
| if (!rate) { |
| pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, |
| drate, clk_hw_get_name(hw)); |
| return -EINVAL; |
| } |
| |
| tmp = readl_relaxed(pll->con_reg); |
| |
| if (!(samsung_pll2550xx_mp_change(rate->mdiv, rate->pdiv, tmp))) { |
| /* If only s change, change just s value only*/ |
| tmp &= ~(PLL2550XX_S_MASK << PLL2550XX_S_SHIFT); |
| tmp |= rate->sdiv << PLL2550XX_S_SHIFT; |
| writel_relaxed(tmp, pll->con_reg); |
| |
| return 0; |
| } |
| |
| /* Set PLL lock time. */ |
| writel_relaxed(rate->pdiv * PLL2550XX_LOCK_FACTOR, pll->lock_reg); |
| |
| /* Change PLL PMS values */ |
| tmp &= ~((PLL2550XX_M_MASK << PLL2550XX_M_SHIFT) | |
| (PLL2550XX_P_MASK << PLL2550XX_P_SHIFT) | |
| (PLL2550XX_S_MASK << PLL2550XX_S_SHIFT)); |
| tmp |= (rate->mdiv << PLL2550XX_M_SHIFT) | |
| (rate->pdiv << PLL2550XX_P_SHIFT) | |
| (rate->sdiv << PLL2550XX_S_SHIFT); |
| writel_relaxed(tmp, pll->con_reg); |
| |
| /* Wait for PLL lock */ |
| return samsung_pll_lock_wait(pll, |
| PLL2550XX_LOCK_STAT_MASK << PLL2550XX_LOCK_STAT_SHIFT); |
| } |
| |
| static const struct clk_ops samsung_pll2550xx_clk_ops = { |
| .recalc_rate = samsung_pll2550xx_recalc_rate, |
| .round_rate = samsung_pll_round_rate, |
| .set_rate = samsung_pll2550xx_set_rate, |
| }; |
| |
| static const struct clk_ops samsung_pll2550xx_clk_min_ops = { |
| .recalc_rate = samsung_pll2550xx_recalc_rate, |
| }; |
| |
| /* |
| * PLL2650x Clock Type |
| */ |
| |
| /* Maximum lock time can be 3000 * PDIV cycles */ |
| #define PLL2650X_LOCK_FACTOR 3000 |
| |
| #define PLL2650X_M_MASK 0x1ff |
| #define PLL2650X_P_MASK 0x3f |
| #define PLL2650X_S_MASK 0x7 |
| #define PLL2650X_K_MASK 0xffff |
| #define PLL2650X_LOCK_STAT_MASK 0x1 |
| #define PLL2650X_M_SHIFT 16 |
| #define PLL2650X_P_SHIFT 8 |
| #define PLL2650X_S_SHIFT 0 |
| #define PLL2650X_K_SHIFT 0 |
| #define PLL2650X_LOCK_STAT_SHIFT 29 |
| #define PLL2650X_PLL_ENABLE_SHIFT 31 |
| |
| static unsigned long samsung_pll2650x_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u64 fout = parent_rate; |
| u32 mdiv, pdiv, sdiv, pll_con0, pll_con1; |
| s16 kdiv; |
| |
| pll_con0 = readl_relaxed(pll->con_reg); |
| mdiv = (pll_con0 >> PLL2650X_M_SHIFT) & PLL2650X_M_MASK; |
| pdiv = (pll_con0 >> PLL2650X_P_SHIFT) & PLL2650X_P_MASK; |
| sdiv = (pll_con0 >> PLL2650X_S_SHIFT) & PLL2650X_S_MASK; |
| |
| pll_con1 = readl_relaxed(pll->con_reg + 4); |
| kdiv = (s16)((pll_con1 >> PLL2650X_K_SHIFT) & PLL2650X_K_MASK); |
| |
| fout *= (mdiv << 16) + kdiv; |
| do_div(fout, (pdiv << sdiv)); |
| fout >>= 16; |
| |
| return (unsigned long)fout; |
| } |
| |
| static int samsung_pll2650x_set_rate(struct clk_hw *hw, unsigned long drate, |
| unsigned long prate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| const struct samsung_pll_rate_table *rate; |
| u32 con0, con1; |
| |
| /* Get required rate settings from table */ |
| rate = samsung_get_pll_settings(pll, drate); |
| if (!rate) { |
| pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, |
| drate, clk_hw_get_name(hw)); |
| return -EINVAL; |
| } |
| |
| con0 = readl_relaxed(pll->con_reg); |
| con1 = readl_relaxed(pll->con_reg + 4); |
| |
| /* Set PLL lock time. */ |
| writel_relaxed(rate->pdiv * PLL2650X_LOCK_FACTOR, pll->lock_reg); |
| |
| /* Change PLL PMS values */ |
| con0 &= ~((PLL2650X_M_MASK << PLL2650X_M_SHIFT) | |
| (PLL2650X_P_MASK << PLL2650X_P_SHIFT) | |
| (PLL2650X_S_MASK << PLL2650X_S_SHIFT)); |
| con0 |= (rate->mdiv << PLL2650X_M_SHIFT) | |
| (rate->pdiv << PLL2650X_P_SHIFT) | |
| (rate->sdiv << PLL2650X_S_SHIFT); |
| con0 |= (1 << PLL2650X_PLL_ENABLE_SHIFT); |
| writel_relaxed(con0, pll->con_reg); |
| |
| con1 &= ~(PLL2650X_K_MASK << PLL2650X_K_SHIFT); |
| con1 |= ((rate->kdiv & PLL2650X_K_MASK) << PLL2650X_K_SHIFT); |
| writel_relaxed(con1, pll->con_reg + 4); |
| |
| /* Wait for PLL lock */ |
| return samsung_pll_lock_wait(pll, |
| PLL2650X_LOCK_STAT_MASK << PLL2650X_LOCK_STAT_SHIFT); |
| } |
| |
| static const struct clk_ops samsung_pll2650x_clk_ops = { |
| .recalc_rate = samsung_pll2650x_recalc_rate, |
| .round_rate = samsung_pll_round_rate, |
| .set_rate = samsung_pll2650x_set_rate, |
| }; |
| |
| static const struct clk_ops samsung_pll2650x_clk_min_ops = { |
| .recalc_rate = samsung_pll2650x_recalc_rate, |
| }; |
| |
| /* |
| * PLL2650XX Clock Type |
| */ |
| |
| /* Maximum lock time can be 3000 * PDIV cycles */ |
| #define PLL2650XX_LOCK_FACTOR 3000 |
| |
| #define PLL2650XX_MDIV_SHIFT 9 |
| #define PLL2650XX_PDIV_SHIFT 3 |
| #define PLL2650XX_SDIV_SHIFT 0 |
| #define PLL2650XX_KDIV_SHIFT 0 |
| #define PLL2650XX_MDIV_MASK 0x1ff |
| #define PLL2650XX_PDIV_MASK 0x3f |
| #define PLL2650XX_SDIV_MASK 0x7 |
| #define PLL2650XX_KDIV_MASK 0xffff |
| #define PLL2650XX_PLL_ENABLE_SHIFT 23 |
| #define PLL2650XX_PLL_LOCKTIME_SHIFT 21 |
| #define PLL2650XX_PLL_FOUTMASK_SHIFT 31 |
| |
| static unsigned long samsung_pll2650xx_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 mdiv, pdiv, sdiv, pll_con0, pll_con2; |
| s16 kdiv; |
| u64 fvco = parent_rate; |
| |
| pll_con0 = readl_relaxed(pll->con_reg); |
| pll_con2 = readl_relaxed(pll->con_reg + 8); |
| mdiv = (pll_con0 >> PLL2650XX_MDIV_SHIFT) & PLL2650XX_MDIV_MASK; |
| pdiv = (pll_con0 >> PLL2650XX_PDIV_SHIFT) & PLL2650XX_PDIV_MASK; |
| sdiv = (pll_con0 >> PLL2650XX_SDIV_SHIFT) & PLL2650XX_SDIV_MASK; |
| kdiv = (s16)(pll_con2 & PLL2650XX_KDIV_MASK); |
| |
| fvco *= (mdiv << 16) + kdiv; |
| do_div(fvco, (pdiv << sdiv)); |
| fvco >>= 16; |
| |
| return (unsigned long)fvco; |
| } |
| |
| static int samsung_pll2650xx_set_rate(struct clk_hw *hw, unsigned long drate, |
| unsigned long parent_rate) |
| { |
| struct samsung_clk_pll *pll = to_clk_pll(hw); |
| u32 pll_con0, pll_con2; |
| const struct samsung_pll_rate_table *rate; |
| |
| rate = samsung_get_pll_settings(pll, drate); |
| if (!rate) { |
| pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__, |
| drate, clk_hw_get_name(hw)); |
| return -EINVAL; |
| } |
| |
| pll_con0 = readl_relaxed(pll->con_reg); |
| pll_con2 = readl_relaxed(pll->con_reg + 8); |
| |
| /* Change PLL PMS values */ |
| pll_con0 &= ~(PLL2650XX_MDIV_MASK << PLL2650XX_MDIV_SHIFT | |
| PLL2650XX_PDIV_MASK << PLL2650XX_PDIV_SHIFT | |
| PLL2650XX_SDIV_MASK << PLL2650XX_SDIV_SHIFT); |
| pll_con0 |= rate->mdiv << PLL2650XX_MDIV_SHIFT; |
| pll_con0 |= rate->pdiv << PLL2650XX_PDIV_SHIFT; |
| pll_con0 |= rate->sdiv << PLL2650XX_SDIV_SHIFT; |
| pll_con0 |= 1 << PLL2650XX_PLL_ENABLE_SHIFT; |
| pll_con0 |= 1 << PLL2650XX_PLL_FOUTMASK_SHIFT; |
| |
| pll_con2 &= ~(PLL2650XX_KDIV_MASK << PLL2650XX_KDIV_SHIFT); |
| pll_con2 |= ((~(rate->kdiv) + 1) & PLL2650XX_KDIV_MASK) |
| << PLL2650XX_KDIV_SHIFT; |
| |
| /* Set PLL lock time. */ |
| writel_relaxed(PLL2650XX_LOCK_FACTOR * rate->pdiv, pll->lock_reg); |
| |
| writel_relaxed(pll_con0, pll->con_reg); |
| writel_relaxed(pll_con2, pll->con_reg + 8); |
| |
| return samsung_pll_lock_wait(pll, 0x1 << PLL2650XX_PLL_LOCKTIME_SHIFT); |
| } |
| |
| static const struct clk_ops samsung_pll2650xx_clk_ops = { |
| .recalc_rate = samsung_pll2650xx_recalc_rate, |
| .set_rate = samsung_pll2650xx_set_rate, |
| .round_rate = samsung_pll_round_rate, |
| }; |
| |
| static const struct clk_ops samsung_pll2650xx_clk_min_ops = { |
| .recalc_rate = samsung_pll2650xx_recalc_rate, |
| }; |
| |
| static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx, |
| const struct samsung_pll_clock *pll_clk) |
| { |
| struct samsung_clk_pll *pll; |
| struct clk_init_data init; |
| int ret, len; |
| |
| pll = kzalloc(sizeof(*pll), GFP_KERNEL); |
| if (!pll) { |
| pr_err("%s: could not allocate pll clk %s\n", |
| __func__, pll_clk->name); |
| return; |
| } |
| |
| init.name = pll_clk->name; |
| init.flags = pll_clk->flags; |
| init.parent_names = &pll_clk->parent_name; |
| init.num_parents = 1; |
| |
| if (pll_clk->rate_table) { |
| /* find count of rates in rate_table */ |
| for (len = 0; pll_clk->rate_table[len].rate != 0; ) |
| len++; |
| |
| pll->rate_count = len; |
| pll->rate_table = kmemdup(pll_clk->rate_table, |
| pll->rate_count * |
| sizeof(struct samsung_pll_rate_table), |
| GFP_KERNEL); |
| WARN(!pll->rate_table, |
| "%s: could not allocate rate table for %s\n", |
| __func__, pll_clk->name); |
| } |
| |
| switch (pll_clk->type) { |
| case pll_2126: |
| init.ops = &samsung_pll2126_clk_ops; |
| break; |
| case pll_3000: |
| init.ops = &samsung_pll3000_clk_ops; |
| break; |
| /* clk_ops for 35xx and 2550 are similar */ |
| case pll_35xx: |
| case pll_2550: |
| case pll_1450x: |
| case pll_1451x: |
| case pll_1452x: |
| case pll_142xx: |
| pll->enable_offs = PLL35XX_ENABLE_SHIFT; |
| pll->lock_offs = PLL35XX_LOCK_STAT_SHIFT; |
| if (!pll->rate_table) |
| init.ops = &samsung_pll35xx_clk_min_ops; |
| else |
| init.ops = &samsung_pll35xx_clk_ops; |
| break; |
| case pll_1417x: |
| case pll_0818x: |
| case pll_0822x: |
| pll->enable_offs = PLL0822X_ENABLE_SHIFT; |
| pll->lock_offs = PLL0822X_LOCK_STAT_SHIFT; |
| if (!pll->rate_table) |
| init.ops = &samsung_pll0822x_clk_min_ops; |
| else |
| init.ops = &samsung_pll0822x_clk_ops; |
| break; |
| case pll_4500: |
| init.ops = &samsung_pll45xx_clk_min_ops; |
| break; |
| case pll_4502: |
| case pll_4508: |
| if (!pll->rate_table) |
| init.ops = &samsung_pll45xx_clk_min_ops; |
| else |
| init.ops = &samsung_pll45xx_clk_ops; |
| break; |
| /* clk_ops for 36xx and 2650 are similar */ |
| case pll_36xx: |
| case pll_2650: |
| pll->enable_offs = PLL36XX_ENABLE_SHIFT; |
| pll->lock_offs = PLL36XX_LOCK_STAT_SHIFT; |
| if (!pll->rate_table) |
| init.ops = &samsung_pll36xx_clk_min_ops; |
| else |
| init.ops = &samsung_pll36xx_clk_ops; |
| break; |
| case pll_0831x: |
| pll->enable_offs = PLL0831X_ENABLE_SHIFT; |
| pll->lock_offs = PLL0831X_LOCK_STAT_SHIFT; |
| if (!pll->rate_table) |
| init.ops = &samsung_pll0831x_clk_min_ops; |
| else |
| init.ops = &samsung_pll0831x_clk_ops; |
| break; |
| case pll_6552: |
| case pll_6552_s3c2416: |
| init.ops = &samsung_pll6552_clk_ops; |
| break; |
| case pll_6553: |
| init.ops = &samsung_pll6553_clk_ops; |
| break; |
| case pll_4600: |
| case pll_4650: |
| case pll_4650c: |
| case pll_1460x: |
| if (!pll->rate_table) |
| init.ops = &samsung_pll46xx_clk_min_ops; |
| else |
| init.ops = &samsung_pll46xx_clk_ops; |
| break; |
| case pll_2550x: |
| init.ops = &samsung_pll2550x_clk_ops; |
| break; |
| case pll_2550xx: |
| if (!pll->rate_table) |
| init.ops = &samsung_pll2550xx_clk_min_ops; |
| else |
| init.ops = &samsung_pll2550xx_clk_ops; |
| break; |
| case pll_2650x: |
| if (!pll->rate_table) |
| init.ops = &samsung_pll2650x_clk_min_ops; |
| else |
| init.ops = &samsung_pll2650x_clk_ops; |
| break; |
| case pll_2650xx: |
| if (!pll->rate_table) |
| init.ops = &samsung_pll2650xx_clk_min_ops; |
| else |
| init.ops = &samsung_pll2650xx_clk_ops; |
| break; |
| default: |
| pr_warn("%s: Unknown pll type for pll clk %s\n", |
| __func__, pll_clk->name); |
| } |
| |
| pll->hw.init = &init; |
| pll->type = pll_clk->type; |
| pll->lock_reg = ctx->reg_base + pll_clk->lock_offset; |
| pll->con_reg = ctx->reg_base + pll_clk->con_offset; |
| |
| ret = clk_hw_register(ctx->dev, &pll->hw); |
| if (ret) { |
| pr_err("%s: failed to register pll clock %s : %d\n", |
| __func__, pll_clk->name, ret); |
| kfree(pll->rate_table); |
| kfree(pll); |
| return; |
| } |
| |
| samsung_clk_add_lookup(ctx, &pll->hw, pll_clk->id); |
| } |
| |
| void __init samsung_clk_register_pll(struct samsung_clk_provider *ctx, |
| const struct samsung_pll_clock *pll_list, |
| unsigned int nr_pll) |
| { |
| int cnt; |
| |
| for (cnt = 0; cnt < nr_pll; cnt++) |
| _samsung_clk_register_pll(ctx, &pll_list[cnt]); |
| } |