| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| /* |
| * Driver for Broadcom MPI3 Storage Controllers |
| * |
| * Copyright (C) 2017-2023 Broadcom Inc. |
| * (mailto: mpi3mr-linuxdrv.pdl@broadcom.com) |
| * |
| */ |
| |
| #ifndef MPI3MR_H_INCLUDED |
| #define MPI3MR_H_INCLUDED |
| |
| #include <linux/blkdev.h> |
| #include <linux/blk-mq.h> |
| #include <linux/blk-mq-pci.h> |
| #include <linux/delay.h> |
| #include <linux/dmapool.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/miscdevice.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/poll.h> |
| #include <linux/sched.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <linux/uaccess.h> |
| #include <linux/utsname.h> |
| #include <linux/workqueue.h> |
| #include <asm/unaligned.h> |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_cmnd.h> |
| #include <scsi/scsi_dbg.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_tcq.h> |
| #include <uapi/scsi/scsi_bsg_mpi3mr.h> |
| #include <scsi/scsi_transport_sas.h> |
| |
| #include "mpi/mpi30_transport.h" |
| #include "mpi/mpi30_cnfg.h" |
| #include "mpi/mpi30_image.h" |
| #include "mpi/mpi30_init.h" |
| #include "mpi/mpi30_ioc.h" |
| #include "mpi/mpi30_sas.h" |
| #include "mpi/mpi30_pci.h" |
| #include "mpi3mr_debug.h" |
| |
| /* Global list and lock for storing multiple adapters managed by the driver */ |
| extern spinlock_t mrioc_list_lock; |
| extern struct list_head mrioc_list; |
| extern int prot_mask; |
| extern atomic64_t event_counter; |
| |
| #define MPI3MR_DRIVER_VERSION "8.4.1.0.0" |
| #define MPI3MR_DRIVER_RELDATE "16-March-2023" |
| |
| #define MPI3MR_DRIVER_NAME "mpi3mr" |
| #define MPI3MR_DRIVER_LICENSE "GPL" |
| #define MPI3MR_DRIVER_AUTHOR "Broadcom Inc. <mpi3mr-linuxdrv.pdl@broadcom.com>" |
| #define MPI3MR_DRIVER_DESC "MPI3 Storage Controller Device Driver" |
| |
| #define MPI3MR_NAME_LENGTH 32 |
| #define IOCNAME "%s: " |
| |
| #define MPI3MR_MAX_SECTORS 2048 |
| |
| /* Definitions for internal SGL and Chain SGL buffers */ |
| #define MPI3MR_PAGE_SIZE_4K 4096 |
| #define MPI3MR_SG_DEPTH (MPI3MR_PAGE_SIZE_4K / sizeof(struct mpi3_sge_common)) |
| |
| /* Definitions for MAX values for shost */ |
| #define MPI3MR_MAX_CMDS_LUN 128 |
| #define MPI3MR_MAX_CDB_LENGTH 32 |
| |
| /* Admin queue management definitions */ |
| #define MPI3MR_ADMIN_REQ_Q_SIZE (2 * MPI3MR_PAGE_SIZE_4K) |
| #define MPI3MR_ADMIN_REPLY_Q_SIZE (4 * MPI3MR_PAGE_SIZE_4K) |
| #define MPI3MR_ADMIN_REQ_FRAME_SZ 128 |
| #define MPI3MR_ADMIN_REPLY_FRAME_SZ 16 |
| |
| /* Operational queue management definitions */ |
| #define MPI3MR_OP_REQ_Q_QD 512 |
| #define MPI3MR_OP_REP_Q_QD 1024 |
| #define MPI3MR_OP_REP_Q_QD4K 4096 |
| #define MPI3MR_OP_REQ_Q_SEG_SIZE 4096 |
| #define MPI3MR_OP_REP_Q_SEG_SIZE 4096 |
| #define MPI3MR_MAX_SEG_LIST_SIZE 4096 |
| |
| /* Reserved Host Tag definitions */ |
| #define MPI3MR_HOSTTAG_INVALID 0xFFFF |
| #define MPI3MR_HOSTTAG_INITCMDS 1 |
| #define MPI3MR_HOSTTAG_BSG_CMDS 2 |
| #define MPI3MR_HOSTTAG_PEL_ABORT 3 |
| #define MPI3MR_HOSTTAG_PEL_WAIT 4 |
| #define MPI3MR_HOSTTAG_BLK_TMS 5 |
| #define MPI3MR_HOSTTAG_CFG_CMDS 6 |
| #define MPI3MR_HOSTTAG_TRANSPORT_CMDS 7 |
| |
| #define MPI3MR_NUM_DEVRMCMD 16 |
| #define MPI3MR_HOSTTAG_DEVRMCMD_MIN (MPI3MR_HOSTTAG_TRANSPORT_CMDS + 1) |
| #define MPI3MR_HOSTTAG_DEVRMCMD_MAX (MPI3MR_HOSTTAG_DEVRMCMD_MIN + \ |
| MPI3MR_NUM_DEVRMCMD - 1) |
| |
| #define MPI3MR_INTERNAL_CMDS_RESVD MPI3MR_HOSTTAG_DEVRMCMD_MAX |
| #define MPI3MR_NUM_EVTACKCMD 4 |
| #define MPI3MR_HOSTTAG_EVTACKCMD_MIN (MPI3MR_HOSTTAG_DEVRMCMD_MAX + 1) |
| #define MPI3MR_HOSTTAG_EVTACKCMD_MAX (MPI3MR_HOSTTAG_EVTACKCMD_MIN + \ |
| MPI3MR_NUM_EVTACKCMD - 1) |
| |
| /* Reduced resource count definition for crash kernel */ |
| #define MPI3MR_HOST_IOS_KDUMP 128 |
| |
| /* command/controller interaction timeout definitions in seconds */ |
| #define MPI3MR_INTADMCMD_TIMEOUT 60 |
| #define MPI3MR_PORTENABLE_TIMEOUT 300 |
| #define MPI3MR_PORTENABLE_POLL_INTERVAL 5 |
| #define MPI3MR_ABORTTM_TIMEOUT 60 |
| #define MPI3MR_RESETTM_TIMEOUT 60 |
| #define MPI3MR_RESET_HOST_IOWAIT_TIMEOUT 5 |
| #define MPI3MR_TSUPDATE_INTERVAL 900 |
| #define MPI3MR_DEFAULT_SHUTDOWN_TIME 120 |
| #define MPI3MR_RAID_ERRREC_RESET_TIMEOUT 180 |
| #define MPI3MR_PREPARE_FOR_RESET_TIMEOUT 180 |
| #define MPI3MR_RESET_ACK_TIMEOUT 30 |
| #define MPI3MR_MUR_TIMEOUT 120 |
| |
| #define MPI3MR_WATCHDOG_INTERVAL 1000 /* in milli seconds */ |
| |
| #define MPI3MR_DEFAULT_CFG_PAGE_SZ 1024 /* in bytes */ |
| |
| #define MPI3MR_RESET_TOPOLOGY_SETTLE_TIME 10 |
| |
| #define MPI3MR_SCMD_TIMEOUT (60 * HZ) |
| #define MPI3MR_EH_SCMD_TIMEOUT (60 * HZ) |
| |
| /* Internal admin command state definitions*/ |
| #define MPI3MR_CMD_NOTUSED 0x8000 |
| #define MPI3MR_CMD_COMPLETE 0x0001 |
| #define MPI3MR_CMD_PENDING 0x0002 |
| #define MPI3MR_CMD_REPLY_VALID 0x0004 |
| #define MPI3MR_CMD_RESET 0x0008 |
| |
| /* Definitions for Event replies and sense buffer allocated per controller */ |
| #define MPI3MR_NUM_EVT_REPLIES 64 |
| #define MPI3MR_SENSE_BUF_SZ 256 |
| #define MPI3MR_SENSEBUF_FACTOR 3 |
| #define MPI3MR_CHAINBUF_FACTOR 3 |
| #define MPI3MR_CHAINBUFDIX_FACTOR 2 |
| |
| /* Invalid target device handle */ |
| #define MPI3MR_INVALID_DEV_HANDLE 0xFFFF |
| |
| /* Controller Reset related definitions */ |
| #define MPI3MR_HOSTDIAG_UNLOCK_RETRY_COUNT 5 |
| #define MPI3MR_MAX_RESET_RETRY_COUNT 3 |
| |
| /* ResponseCode definitions */ |
| #define MPI3MR_RI_MASK_RESPCODE (0x000000FF) |
| #define MPI3MR_RSP_IO_QUEUED_ON_IOC \ |
| MPI3_SCSITASKMGMT_RSPCODE_IO_QUEUED_ON_IOC |
| |
| #define MPI3MR_DEFAULT_MDTS (128 * 1024) |
| #define MPI3MR_DEFAULT_PGSZEXP (12) |
| |
| /* Command retry count definitions */ |
| #define MPI3MR_DEV_RMHS_RETRY_COUNT 3 |
| #define MPI3MR_PEL_RETRY_COUNT 3 |
| |
| /* Default target device queue depth */ |
| #define MPI3MR_DEFAULT_SDEV_QD 32 |
| |
| /* Definitions for Threaded IRQ poll*/ |
| #define MPI3MR_IRQ_POLL_SLEEP 2 |
| #define MPI3MR_IRQ_POLL_TRIGGER_IOCOUNT 8 |
| |
| /* Definitions for the controller security status*/ |
| #define MPI3MR_CTLR_SECURITY_STATUS_MASK 0x0C |
| #define MPI3MR_CTLR_SECURE_DBG_STATUS_MASK 0x02 |
| |
| #define MPI3MR_INVALID_DEVICE 0x00 |
| #define MPI3MR_CONFIG_SECURE_DEVICE 0x04 |
| #define MPI3MR_HARD_SECURE_DEVICE 0x08 |
| #define MPI3MR_TAMPERED_DEVICE 0x0C |
| |
| /* SGE Flag definition */ |
| #define MPI3MR_SGEFLAGS_SYSTEM_SIMPLE_END_OF_LIST \ |
| (MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE | MPI3_SGE_FLAGS_DLAS_SYSTEM | \ |
| MPI3_SGE_FLAGS_END_OF_LIST) |
| |
| /* MSI Index from Reply Queue Index */ |
| #define REPLY_QUEUE_IDX_TO_MSIX_IDX(qidx, offset) (qidx + offset) |
| |
| /* |
| * Maximum data transfer size definitions for management |
| * application commands |
| */ |
| #define MPI3MR_MAX_APP_XFER_SIZE (1 * 1024 * 1024) |
| #define MPI3MR_MAX_APP_XFER_SEGMENTS 512 |
| /* |
| * 2048 sectors are for data buffers and additional 512 sectors for |
| * other buffers |
| */ |
| #define MPI3MR_MAX_APP_XFER_SECTORS (2048 + 512) |
| |
| /** |
| * struct mpi3mr_nvme_pt_sge - Structure to store SGEs for NVMe |
| * Encapsulated commands. |
| * |
| * @base_addr: Physical address |
| * @length: SGE length |
| * @rsvd: Reserved |
| * @rsvd1: Reserved |
| * @sgl_type: sgl type |
| */ |
| struct mpi3mr_nvme_pt_sge { |
| u64 base_addr; |
| u32 length; |
| u16 rsvd; |
| u8 rsvd1; |
| u8 sgl_type; |
| }; |
| |
| /** |
| * struct mpi3mr_buf_map - local structure to |
| * track kernel and user buffers associated with an BSG |
| * structure. |
| * |
| * @bsg_buf: BSG buffer virtual address |
| * @bsg_buf_len: BSG buffer length |
| * @kern_buf: Kernel buffer virtual address |
| * @kern_buf_len: Kernel buffer length |
| * @kern_buf_dma: Kernel buffer DMA address |
| * @data_dir: Data direction. |
| */ |
| struct mpi3mr_buf_map { |
| void *bsg_buf; |
| u32 bsg_buf_len; |
| void *kern_buf; |
| u32 kern_buf_len; |
| dma_addr_t kern_buf_dma; |
| u8 data_dir; |
| }; |
| |
| /* IOC State definitions */ |
| enum mpi3mr_iocstate { |
| MRIOC_STATE_READY = 1, |
| MRIOC_STATE_RESET, |
| MRIOC_STATE_FAULT, |
| MRIOC_STATE_BECOMING_READY, |
| MRIOC_STATE_RESET_REQUESTED, |
| MRIOC_STATE_UNRECOVERABLE, |
| }; |
| |
| /* Reset reason code definitions*/ |
| enum mpi3mr_reset_reason { |
| MPI3MR_RESET_FROM_BRINGUP = 1, |
| MPI3MR_RESET_FROM_FAULT_WATCH = 2, |
| MPI3MR_RESET_FROM_APP = 3, |
| MPI3MR_RESET_FROM_EH_HOS = 4, |
| MPI3MR_RESET_FROM_TM_TIMEOUT = 5, |
| MPI3MR_RESET_FROM_APP_TIMEOUT = 6, |
| MPI3MR_RESET_FROM_MUR_FAILURE = 7, |
| MPI3MR_RESET_FROM_CTLR_CLEANUP = 8, |
| MPI3MR_RESET_FROM_CIACTIV_FAULT = 9, |
| MPI3MR_RESET_FROM_PE_TIMEOUT = 10, |
| MPI3MR_RESET_FROM_TSU_TIMEOUT = 11, |
| MPI3MR_RESET_FROM_DELREQQ_TIMEOUT = 12, |
| MPI3MR_RESET_FROM_DELREPQ_TIMEOUT = 13, |
| MPI3MR_RESET_FROM_CREATEREPQ_TIMEOUT = 14, |
| MPI3MR_RESET_FROM_CREATEREQQ_TIMEOUT = 15, |
| MPI3MR_RESET_FROM_IOCFACTS_TIMEOUT = 16, |
| MPI3MR_RESET_FROM_IOCINIT_TIMEOUT = 17, |
| MPI3MR_RESET_FROM_EVTNOTIFY_TIMEOUT = 18, |
| MPI3MR_RESET_FROM_EVTACK_TIMEOUT = 19, |
| MPI3MR_RESET_FROM_CIACTVRST_TIMER = 20, |
| MPI3MR_RESET_FROM_GETPKGVER_TIMEOUT = 21, |
| MPI3MR_RESET_FROM_PELABORT_TIMEOUT = 22, |
| MPI3MR_RESET_FROM_SYSFS = 23, |
| MPI3MR_RESET_FROM_SYSFS_TIMEOUT = 24, |
| MPI3MR_RESET_FROM_FIRMWARE = 27, |
| MPI3MR_RESET_FROM_CFG_REQ_TIMEOUT = 29, |
| MPI3MR_RESET_FROM_SAS_TRANSPORT_TIMEOUT = 30, |
| }; |
| |
| /* Queue type definitions */ |
| enum queue_type { |
| MPI3MR_DEFAULT_QUEUE = 0, |
| MPI3MR_POLL_QUEUE, |
| }; |
| |
| /** |
| * struct mpi3mr_compimg_ver - replica of component image |
| * version defined in mpi30_image.h in host endianness |
| * |
| */ |
| struct mpi3mr_compimg_ver { |
| u16 build_num; |
| u16 cust_id; |
| u8 ph_minor; |
| u8 ph_major; |
| u8 gen_minor; |
| u8 gen_major; |
| }; |
| |
| /** |
| * struct mpi3mr_ioc_facs - replica of component image version |
| * defined in mpi30_ioc.h in host endianness |
| * |
| */ |
| struct mpi3mr_ioc_facts { |
| u32 ioc_capabilities; |
| struct mpi3mr_compimg_ver fw_ver; |
| u32 mpi_version; |
| u16 max_reqs; |
| u16 product_id; |
| u16 op_req_sz; |
| u16 reply_sz; |
| u16 exceptions; |
| u16 max_perids; |
| u16 max_pds; |
| u16 max_sasexpanders; |
| u16 max_sasinitiators; |
| u16 max_enclosures; |
| u16 max_pcie_switches; |
| u16 max_nvme; |
| u16 max_vds; |
| u16 max_hpds; |
| u16 max_advhpds; |
| u16 max_raid_pds; |
| u16 min_devhandle; |
| u16 max_devhandle; |
| u16 max_op_req_q; |
| u16 max_op_reply_q; |
| u16 shutdown_timeout; |
| u8 ioc_num; |
| u8 who_init; |
| u16 max_msix_vectors; |
| u8 personality; |
| u8 dma_mask; |
| u8 protocol_flags; |
| u8 sge_mod_mask; |
| u8 sge_mod_value; |
| u8 sge_mod_shift; |
| u8 max_dev_per_tg; |
| u16 max_io_throttle_group; |
| u16 io_throttle_data_length; |
| u16 io_throttle_low; |
| u16 io_throttle_high; |
| |
| }; |
| |
| /** |
| * struct segments - memory descriptor structure to store |
| * virtual and dma addresses for operational queue segments. |
| * |
| * @segment: virtual address |
| * @segment_dma: dma address |
| */ |
| struct segments { |
| void *segment; |
| dma_addr_t segment_dma; |
| }; |
| |
| /** |
| * struct op_req_qinfo - Operational Request Queue Information |
| * |
| * @ci: consumer index |
| * @pi: producer index |
| * @num_request: Maximum number of entries in the queue |
| * @qid: Queue Id starting from 1 |
| * @reply_qid: Associated reply queue Id |
| * @num_segments: Number of discontiguous memory segments |
| * @segment_qd: Depth of each segments |
| * @q_lock: Concurrent queue access lock |
| * @q_segments: Segment descriptor pointer |
| * @q_segment_list: Segment list base virtual address |
| * @q_segment_list_dma: Segment list base DMA address |
| */ |
| struct op_req_qinfo { |
| u16 ci; |
| u16 pi; |
| u16 num_requests; |
| u16 qid; |
| u16 reply_qid; |
| u16 num_segments; |
| u16 segment_qd; |
| spinlock_t q_lock; |
| struct segments *q_segments; |
| void *q_segment_list; |
| dma_addr_t q_segment_list_dma; |
| }; |
| |
| /** |
| * struct op_reply_qinfo - Operational Reply Queue Information |
| * |
| * @ci: consumer index |
| * @qid: Queue Id starting from 1 |
| * @num_replies: Maximum number of entries in the queue |
| * @num_segments: Number of discontiguous memory segments |
| * @segment_qd: Depth of each segments |
| * @q_segments: Segment descriptor pointer |
| * @q_segment_list: Segment list base virtual address |
| * @q_segment_list_dma: Segment list base DMA address |
| * @ephase: Expected phased identifier for the reply queue |
| * @pend_ios: Number of IOs pending in HW for this queue |
| * @enable_irq_poll: Flag to indicate polling is enabled |
| * @in_use: Queue is handled by poll/ISR |
| * @qtype: Type of queue (types defined in enum queue_type) |
| */ |
| struct op_reply_qinfo { |
| u16 ci; |
| u16 qid; |
| u16 num_replies; |
| u16 num_segments; |
| u16 segment_qd; |
| struct segments *q_segments; |
| void *q_segment_list; |
| dma_addr_t q_segment_list_dma; |
| u8 ephase; |
| atomic_t pend_ios; |
| bool enable_irq_poll; |
| atomic_t in_use; |
| enum queue_type qtype; |
| }; |
| |
| /** |
| * struct mpi3mr_intr_info - Interrupt cookie information |
| * |
| * @mrioc: Adapter instance reference |
| * @os_irq: irq number |
| * @msix_index: MSIx index |
| * @op_reply_q: Associated operational reply queue |
| * @name: Dev name for the irq claiming device |
| */ |
| struct mpi3mr_intr_info { |
| struct mpi3mr_ioc *mrioc; |
| int os_irq; |
| u16 msix_index; |
| struct op_reply_qinfo *op_reply_q; |
| char name[MPI3MR_NAME_LENGTH]; |
| }; |
| |
| /** |
| * struct mpi3mr_throttle_group_info - Throttle group info |
| * |
| * @io_divert: Flag indicates io divert is on or off for the TG |
| * @need_qd_reduction: Flag to indicate QD reduction is needed |
| * @qd_reduction: Queue Depth reduction in units of 10% |
| * @fw_qd: QueueDepth value reported by the firmware |
| * @modified_qd: Modified QueueDepth value due to throttling |
| * @id: Throttle Group ID. |
| * @high: High limit to turn on throttling in 512 byte blocks |
| * @low: Low limit to turn off throttling in 512 byte blocks |
| * @pend_large_data_sz: Counter to track pending large data |
| */ |
| struct mpi3mr_throttle_group_info { |
| u8 io_divert; |
| u8 need_qd_reduction; |
| u8 qd_reduction; |
| u16 fw_qd; |
| u16 modified_qd; |
| u16 id; |
| u32 high; |
| u32 low; |
| atomic_t pend_large_data_sz; |
| }; |
| |
| /* HBA port flags */ |
| #define MPI3MR_HBA_PORT_FLAG_DIRTY 0x01 |
| |
| /** |
| * struct mpi3mr_hba_port - HBA's port information |
| * @port_id: Port number |
| * @flags: HBA port flags |
| */ |
| struct mpi3mr_hba_port { |
| struct list_head list; |
| u8 port_id; |
| u8 flags; |
| }; |
| |
| /** |
| * struct mpi3mr_sas_port - Internal SAS port information |
| * @port_list: List of ports belonging to a SAS node |
| * @num_phys: Number of phys associated with port |
| * @marked_responding: used while refresing the sas ports |
| * @lowest_phy: lowest phy ID of current sas port |
| * @phy_mask: phy_mask of current sas port |
| * @hba_port: HBA port entry |
| * @remote_identify: Attached device identification |
| * @rphy: SAS transport layer rphy object |
| * @port: SAS transport layer port object |
| * @phy_list: mpi3mr_sas_phy objects belonging to this port |
| */ |
| struct mpi3mr_sas_port { |
| struct list_head port_list; |
| u8 num_phys; |
| u8 marked_responding; |
| int lowest_phy; |
| u32 phy_mask; |
| struct mpi3mr_hba_port *hba_port; |
| struct sas_identify remote_identify; |
| struct sas_rphy *rphy; |
| struct sas_port *port; |
| struct list_head phy_list; |
| }; |
| |
| /** |
| * struct mpi3mr_sas_phy - Internal SAS Phy information |
| * @port_siblings: List of phys belonging to a port |
| * @identify: Phy identification |
| * @remote_identify: Attached device identification |
| * @phy: SAS transport layer Phy object |
| * @phy_id: Unique phy id within a port |
| * @handle: Firmware device handle for this phy |
| * @attached_handle: Firmware device handle for attached device |
| * @phy_belongs_to_port: Flag to indicate phy belongs to port |
| @hba_port: HBA port entry |
| */ |
| struct mpi3mr_sas_phy { |
| struct list_head port_siblings; |
| struct sas_identify identify; |
| struct sas_identify remote_identify; |
| struct sas_phy *phy; |
| u8 phy_id; |
| u16 handle; |
| u16 attached_handle; |
| u8 phy_belongs_to_port; |
| struct mpi3mr_hba_port *hba_port; |
| }; |
| |
| /** |
| * struct mpi3mr_sas_node - SAS host/expander information |
| * @list: List of sas nodes in a controller |
| * @parent_dev: Parent device class |
| * @num_phys: Number phys belonging to sas_node |
| * @sas_address: SAS address of sas_node |
| * @handle: Firmware device handle for this sas_host/expander |
| * @sas_address_parent: SAS address of parent expander or host |
| * @enclosure_handle: Firmware handle of enclosure of this node |
| * @device_info: Capabilities of this sas_host/expander |
| * @non_responding: used to refresh the expander devices during reset |
| * @host_node: Flag to indicate this is a host_node |
| * @hba_port: HBA port entry |
| * @phy: A list of phys that make up this sas_host/expander |
| * @sas_port_list: List of internal ports of this node |
| * @rphy: sas_rphy object of this expander node |
| */ |
| struct mpi3mr_sas_node { |
| struct list_head list; |
| struct device *parent_dev; |
| u8 num_phys; |
| u64 sas_address; |
| u16 handle; |
| u64 sas_address_parent; |
| u16 enclosure_handle; |
| u64 enclosure_logical_id; |
| u8 non_responding; |
| u8 host_node; |
| struct mpi3mr_hba_port *hba_port; |
| struct mpi3mr_sas_phy *phy; |
| struct list_head sas_port_list; |
| struct sas_rphy *rphy; |
| }; |
| |
| /** |
| * struct mpi3mr_enclosure_node - enclosure information |
| * @list: List of enclosures |
| * @pg0: Enclosure page 0; |
| */ |
| struct mpi3mr_enclosure_node { |
| struct list_head list; |
| struct mpi3_enclosure_page0 pg0; |
| }; |
| |
| /** |
| * struct tgt_dev_sas_sata - SAS/SATA device specific |
| * information cached from firmware given data |
| * |
| * @sas_address: World wide unique SAS address |
| * @sas_address_parent: Sas address of parent expander or host |
| * @dev_info: Device information bits |
| * @phy_id: Phy identifier provided in device page 0 |
| * @attached_phy_id: Attached phy identifier provided in device page 0 |
| * @sas_transport_attached: Is this device exposed to transport |
| * @pend_sas_rphy_add: Flag to check device is in process of add |
| * @hba_port: HBA port entry |
| * @rphy: SAS transport layer rphy object |
| */ |
| struct tgt_dev_sas_sata { |
| u64 sas_address; |
| u64 sas_address_parent; |
| u16 dev_info; |
| u8 phy_id; |
| u8 attached_phy_id; |
| u8 sas_transport_attached; |
| u8 pend_sas_rphy_add; |
| struct mpi3mr_hba_port *hba_port; |
| struct sas_rphy *rphy; |
| }; |
| |
| /** |
| * struct tgt_dev_pcie - PCIe device specific information cached |
| * from firmware given data |
| * |
| * @mdts: Maximum data transfer size |
| * @capb: Device capabilities |
| * @pgsz: Device page size |
| * @abort_to: Timeout for abort TM |
| * @reset_to: Timeout for Target/LUN reset TM |
| * @dev_info: Device information bits |
| */ |
| struct tgt_dev_pcie { |
| u32 mdts; |
| u16 capb; |
| u8 pgsz; |
| u8 abort_to; |
| u8 reset_to; |
| u16 dev_info; |
| }; |
| |
| /** |
| * struct tgt_dev_vd - virtual device specific information |
| * cached from firmware given data |
| * |
| * @state: State of the VD |
| * @tg_qd_reduction: Queue Depth reduction in units of 10% |
| * @tg_id: VDs throttle group ID |
| * @high: High limit to turn on throttling in 512 byte blocks |
| * @low: Low limit to turn off throttling in 512 byte blocks |
| * @tg: Pointer to throttle group info |
| */ |
| struct tgt_dev_vd { |
| u8 state; |
| u8 tg_qd_reduction; |
| u16 tg_id; |
| u32 tg_high; |
| u32 tg_low; |
| struct mpi3mr_throttle_group_info *tg; |
| }; |
| |
| |
| /** |
| * union _form_spec_inf - union of device specific information |
| */ |
| union _form_spec_inf { |
| struct tgt_dev_sas_sata sas_sata_inf; |
| struct tgt_dev_pcie pcie_inf; |
| struct tgt_dev_vd vd_inf; |
| }; |
| |
| enum mpi3mr_dev_state { |
| MPI3MR_DEV_CREATED = 1, |
| MPI3MR_DEV_REMOVE_HS_STARTED = 2, |
| MPI3MR_DEV_DELETED = 3, |
| }; |
| |
| /** |
| * struct mpi3mr_tgt_dev - target device data structure |
| * |
| * @list: List pointer |
| * @starget: Scsi_target pointer |
| * @dev_handle: FW device handle |
| * @parent_handle: FW parent device handle |
| * @slot: Slot number |
| * @encl_handle: FW enclosure handle |
| * @perst_id: FW assigned Persistent ID |
| * @devpg0_flag: Device Page0 flag |
| * @dev_type: SAS/SATA/PCIE device type |
| * @is_hidden: Should be exposed to upper layers or not |
| * @host_exposed: Already exposed to host or not |
| * @io_unit_port: IO Unit port ID |
| * @non_stl: Is this device not to be attached with SAS TL |
| * @io_throttle_enabled: I/O throttling needed or not |
| * @q_depth: Device specific Queue Depth |
| * @wwid: World wide ID |
| * @enclosure_logical_id: Enclosure logical identifier |
| * @dev_spec: Device type specific information |
| * @ref_count: Reference count |
| * @state: device state |
| */ |
| struct mpi3mr_tgt_dev { |
| struct list_head list; |
| struct scsi_target *starget; |
| u16 dev_handle; |
| u16 parent_handle; |
| u16 slot; |
| u16 encl_handle; |
| u16 perst_id; |
| u16 devpg0_flag; |
| u8 dev_type; |
| u8 is_hidden; |
| u8 host_exposed; |
| u8 io_unit_port; |
| u8 non_stl; |
| u8 io_throttle_enabled; |
| u16 q_depth; |
| u64 wwid; |
| u64 enclosure_logical_id; |
| union _form_spec_inf dev_spec; |
| struct kref ref_count; |
| enum mpi3mr_dev_state state; |
| }; |
| |
| /** |
| * mpi3mr_tgtdev_get - k reference incrementor |
| * @s: Target device reference |
| * |
| * Increment target device reference count. |
| */ |
| static inline void mpi3mr_tgtdev_get(struct mpi3mr_tgt_dev *s) |
| { |
| kref_get(&s->ref_count); |
| } |
| |
| /** |
| * mpi3mr_free_tgtdev - target device memory dealloctor |
| * @r: k reference pointer of the target device |
| * |
| * Free target device memory when no reference. |
| */ |
| static inline void mpi3mr_free_tgtdev(struct kref *r) |
| { |
| kfree(container_of(r, struct mpi3mr_tgt_dev, ref_count)); |
| } |
| |
| /** |
| * mpi3mr_tgtdev_put - k reference decrementor |
| * @s: Target device reference |
| * |
| * Decrement target device reference count. |
| */ |
| static inline void mpi3mr_tgtdev_put(struct mpi3mr_tgt_dev *s) |
| { |
| kref_put(&s->ref_count, mpi3mr_free_tgtdev); |
| } |
| |
| |
| /** |
| * struct mpi3mr_stgt_priv_data - SCSI target private structure |
| * |
| * @starget: Scsi_target pointer |
| * @dev_handle: FW device handle |
| * @perst_id: FW assigned Persistent ID |
| * @num_luns: Number of Logical Units |
| * @block_io: I/O blocked to the device or not |
| * @dev_removed: Device removed in the Firmware |
| * @dev_removedelay: Device is waiting to be removed in FW |
| * @dev_type: Device type |
| * @io_throttle_enabled: I/O throttling needed or not |
| * @io_divert: Flag indicates io divert is on or off for the dev |
| * @throttle_group: Pointer to throttle group info |
| * @tgt_dev: Internal target device pointer |
| * @pend_count: Counter to track pending I/Os during error |
| * handling |
| */ |
| struct mpi3mr_stgt_priv_data { |
| struct scsi_target *starget; |
| u16 dev_handle; |
| u16 perst_id; |
| u32 num_luns; |
| atomic_t block_io; |
| u8 dev_removed; |
| u8 dev_removedelay; |
| u8 dev_type; |
| u8 io_throttle_enabled; |
| u8 io_divert; |
| struct mpi3mr_throttle_group_info *throttle_group; |
| struct mpi3mr_tgt_dev *tgt_dev; |
| u32 pend_count; |
| }; |
| |
| /** |
| * struct mpi3mr_stgt_priv_data - SCSI device private structure |
| * |
| * @tgt_priv_data: Scsi_target private data pointer |
| * @lun_id: LUN ID of the device |
| * @ncq_prio_enable: NCQ priority enable for SATA device |
| * @pend_count: Counter to track pending I/Os during error |
| * handling |
| */ |
| struct mpi3mr_sdev_priv_data { |
| struct mpi3mr_stgt_priv_data *tgt_priv_data; |
| u32 lun_id; |
| u8 ncq_prio_enable; |
| u32 pend_count; |
| }; |
| |
| /** |
| * struct mpi3mr_drv_cmd - Internal command tracker |
| * |
| * @mutex: Command mutex |
| * @done: Completeor for wakeup |
| * @reply: Firmware reply for internal commands |
| * @sensebuf: Sensebuf for SCSI IO commands |
| * @iou_rc: IO Unit control reason code |
| * @state: Command State |
| * @dev_handle: Firmware handle for device specific commands |
| * @ioc_status: IOC status from the firmware |
| * @ioc_loginfo:IOC log info from the firmware |
| * @is_waiting: Is the command issued in block mode |
| * @is_sense: Is Sense data present |
| * @retry_count: Retry count for retriable commands |
| * @host_tag: Host tag used by the command |
| * @callback: Callback for non blocking commands |
| */ |
| struct mpi3mr_drv_cmd { |
| struct mutex mutex; |
| struct completion done; |
| void *reply; |
| u8 *sensebuf; |
| u8 iou_rc; |
| u16 state; |
| u16 dev_handle; |
| u16 ioc_status; |
| u32 ioc_loginfo; |
| u8 is_waiting; |
| u8 is_sense; |
| u8 retry_count; |
| u16 host_tag; |
| |
| void (*callback)(struct mpi3mr_ioc *mrioc, |
| struct mpi3mr_drv_cmd *drv_cmd); |
| }; |
| |
| /** |
| * struct dma_memory_desc - memory descriptor structure to store |
| * virtual address, dma address and size for any generic dma |
| * memory allocations in the driver. |
| * |
| * @size: buffer size |
| * @addr: virtual address |
| * @dma_addr: dma address |
| */ |
| struct dma_memory_desc { |
| u32 size; |
| void *addr; |
| dma_addr_t dma_addr; |
| }; |
| |
| |
| /** |
| * struct chain_element - memory descriptor structure to store |
| * virtual and dma addresses for chain elements. |
| * |
| * @addr: virtual address |
| * @dma_addr: dma address |
| */ |
| struct chain_element { |
| void *addr; |
| dma_addr_t dma_addr; |
| }; |
| |
| /** |
| * struct scmd_priv - SCSI command private data |
| * |
| * @host_tag: Host tag specific to operational queue |
| * @in_lld_scope: Command in LLD scope or not |
| * @meta_sg_valid: DIX command with meta data SGL or not |
| * @scmd: SCSI Command pointer |
| * @req_q_idx: Operational request queue index |
| * @chain_idx: Chain frame index |
| * @meta_chain_idx: Chain frame index of meta data SGL |
| * @mpi3mr_scsiio_req: MPI SCSI IO request |
| */ |
| struct scmd_priv { |
| u16 host_tag; |
| u8 in_lld_scope; |
| u8 meta_sg_valid; |
| struct scsi_cmnd *scmd; |
| u16 req_q_idx; |
| int chain_idx; |
| int meta_chain_idx; |
| u8 mpi3mr_scsiio_req[MPI3MR_ADMIN_REQ_FRAME_SZ]; |
| }; |
| |
| /** |
| * struct mpi3mr_ioc - Adapter anchor structure stored in shost |
| * private data |
| * |
| * @list: List pointer |
| * @pdev: PCI device pointer |
| * @shost: Scsi_Host pointer |
| * @id: Controller ID |
| * @cpu_count: Number of online CPUs |
| * @irqpoll_sleep: usleep unit used in threaded isr irqpoll |
| * @name: Controller ASCII name |
| * @driver_name: Driver ASCII name |
| * @sysif_regs: System interface registers virtual address |
| * @sysif_regs_phys: System interface registers physical address |
| * @bars: PCI BARS |
| * @dma_mask: DMA mask |
| * @msix_count: Number of MSIX vectors used |
| * @intr_enabled: Is interrupts enabled |
| * @num_admin_req: Number of admin requests |
| * @admin_req_q_sz: Admin request queue size |
| * @admin_req_pi: Admin request queue producer index |
| * @admin_req_ci: Admin request queue consumer index |
| * @admin_req_base: Admin request queue base virtual address |
| * @admin_req_dma: Admin request queue base dma address |
| * @admin_req_lock: Admin queue access lock |
| * @num_admin_replies: Number of admin replies |
| * @admin_reply_q_sz: Admin reply queue size |
| * @admin_reply_ci: Admin reply queue consumer index |
| * @admin_reply_ephase:Admin reply queue expected phase |
| * @admin_reply_base: Admin reply queue base virtual address |
| * @admin_reply_dma: Admin reply queue base dma address |
| * @admin_reply_q_in_use: Queue is handled by poll/ISR |
| * @ready_timeout: Controller ready timeout |
| * @intr_info: Interrupt cookie pointer |
| * @intr_info_count: Number of interrupt cookies |
| * @is_intr_info_set: Flag to indicate intr info is setup |
| * @num_queues: Number of operational queues |
| * @num_op_req_q: Number of operational request queues |
| * @req_qinfo: Operational request queue info pointer |
| * @num_op_reply_q: Number of operational reply queues |
| * @op_reply_qinfo: Operational reply queue info pointer |
| * @init_cmds: Command tracker for initialization commands |
| * @cfg_cmds: Command tracker for configuration requests |
| * @facts: Cached IOC facts data |
| * @op_reply_desc_sz: Operational reply descriptor size |
| * @num_reply_bufs: Number of reply buffers allocated |
| * @reply_buf_pool: Reply buffer pool |
| * @reply_buf: Reply buffer base virtual address |
| * @reply_buf_dma: Reply buffer DMA address |
| * @reply_buf_dma_max_address: Reply DMA address max limit |
| * @reply_free_qsz: Reply free queue size |
| * @reply_free_q_pool: Reply free queue pool |
| * @reply_free_q: Reply free queue base virtual address |
| * @reply_free_q_dma: Reply free queue base DMA address |
| * @reply_free_queue_lock: Reply free queue lock |
| * @reply_free_queue_host_index: Reply free queue host index |
| * @num_sense_bufs: Number of sense buffers |
| * @sense_buf_pool: Sense buffer pool |
| * @sense_buf: Sense buffer base virtual address |
| * @sense_buf_dma: Sense buffer base DMA address |
| * @sense_buf_q_sz: Sense buffer queue size |
| * @sense_buf_q_pool: Sense buffer queue pool |
| * @sense_buf_q: Sense buffer queue virtual address |
| * @sense_buf_q_dma: Sense buffer queue DMA address |
| * @sbq_lock: Sense buffer queue lock |
| * @sbq_host_index: Sense buffer queuehost index |
| * @event_masks: Event mask bitmap |
| * @fwevt_worker_name: Firmware event worker thread name |
| * @fwevt_worker_thread: Firmware event worker thread |
| * @fwevt_lock: Firmware event lock |
| * @fwevt_list: Firmware event list |
| * @watchdog_work_q_name: Fault watchdog worker thread name |
| * @watchdog_work_q: Fault watchdog worker thread |
| * @watchdog_work: Fault watchdog work |
| * @watchdog_lock: Fault watchdog lock |
| * @is_driver_loading: Is driver still loading |
| * @scan_started: Async scan started |
| * @scan_failed: Asycn scan failed |
| * @stop_drv_processing: Stop all command processing |
| * @device_refresh_on: Don't process the events until devices are refreshed |
| * @max_host_ios: Maximum host I/O count |
| * @chain_buf_count: Chain buffer count |
| * @chain_buf_pool: Chain buffer pool |
| * @chain_sgl_list: Chain SGL list |
| * @chain_bitmap: Chain buffer allocator bitmap |
| * @chain_buf_lock: Chain buffer list lock |
| * @bsg_cmds: Command tracker for BSG command |
| * @host_tm_cmds: Command tracker for task management commands |
| * @dev_rmhs_cmds: Command tracker for device removal commands |
| * @evtack_cmds: Command tracker for event ack commands |
| * @devrem_bitmap: Device removal bitmap |
| * @dev_handle_bitmap_bits: Number of bits in device handle bitmap |
| * @removepend_bitmap: Remove pending bitmap |
| * @delayed_rmhs_list: Delayed device removal list |
| * @evtack_cmds_bitmap: Event Ack bitmap |
| * @delayed_evtack_cmds_list: Delayed event acknowledgment list |
| * @ts_update_counter: Timestamp update counter |
| * @reset_in_progress: Reset in progress flag |
| * @unrecoverable: Controller unrecoverable flag |
| * @prev_reset_result: Result of previous reset |
| * @reset_mutex: Controller reset mutex |
| * @reset_waitq: Controller reset wait queue |
| * @prepare_for_reset: Prepare for reset event received |
| * @prepare_for_reset_timeout_counter: Prepare for reset timeout |
| * @prp_list_virt: NVMe encapsulated PRP list virtual base |
| * @prp_list_dma: NVMe encapsulated PRP list DMA |
| * @prp_sz: NVME encapsulated PRP list size |
| * @diagsave_timeout: Diagnostic information save timeout |
| * @logging_level: Controller debug logging level |
| * @flush_io_count: I/O count to flush after reset |
| * @current_event: Firmware event currently in process |
| * @driver_info: Driver, Kernel, OS information to firmware |
| * @change_count: Topology change count |
| * @pel_enabled: Persistent Event Log(PEL) enabled or not |
| * @pel_abort_requested: PEL abort is requested or not |
| * @pel_class: PEL Class identifier |
| * @pel_locale: PEL Locale identifier |
| * @pel_cmds: Command tracker for PEL wait command |
| * @pel_abort_cmd: Command tracker for PEL abort command |
| * @pel_newest_seqnum: Newest PEL sequenece number |
| * @pel_seqnum_virt: PEL sequence number virtual address |
| * @pel_seqnum_dma: PEL sequence number DMA address |
| * @pel_seqnum_sz: PEL sequenece number size |
| * @op_reply_q_offset: Operational reply queue offset with MSIx |
| * @default_qcount: Total Default queues |
| * @active_poll_qcount: Currently active poll queue count |
| * @requested_poll_qcount: User requested poll queue count |
| * @bsg_dev: BSG device structure |
| * @bsg_queue: Request queue for BSG device |
| * @stop_bsgs: Stop BSG request flag |
| * @logdata_buf: Circular buffer to store log data entries |
| * @logdata_buf_idx: Index of entry in buffer to store |
| * @logdata_entry_sz: log data entry size |
| * @pend_large_data_sz: Counter to track pending large data |
| * @io_throttle_data_length: I/O size to track in 512b blocks |
| * @io_throttle_high: I/O size to start throttle in 512b blocks |
| * @io_throttle_low: I/O size to stop throttle in 512b blocks |
| * @num_io_throttle_group: Maximum number of throttle groups |
| * @throttle_groups: Pointer to throttle group info structures |
| * @cfg_page: Default memory for configuration pages |
| * @cfg_page_dma: Configuration page DMA address |
| * @cfg_page_sz: Default configuration page memory size |
| * @sas_transport_enabled: SAS transport enabled or not |
| * @scsi_device_channel: Channel ID for SCSI devices |
| * @transport_cmds: Command tracker for SAS transport commands |
| * @sas_hba: SAS node for the controller |
| * @sas_expander_list: SAS node list of expanders |
| * @sas_node_lock: Lock to protect SAS node list |
| * @hba_port_table_list: List of HBA Ports |
| * @enclosure_list: List of Enclosure objects |
| */ |
| struct mpi3mr_ioc { |
| struct list_head list; |
| struct pci_dev *pdev; |
| struct Scsi_Host *shost; |
| u8 id; |
| int cpu_count; |
| bool enable_segqueue; |
| u32 irqpoll_sleep; |
| |
| char name[MPI3MR_NAME_LENGTH]; |
| char driver_name[MPI3MR_NAME_LENGTH]; |
| |
| volatile struct mpi3_sysif_registers __iomem *sysif_regs; |
| resource_size_t sysif_regs_phys; |
| int bars; |
| u64 dma_mask; |
| |
| u16 msix_count; |
| u8 intr_enabled; |
| |
| u16 num_admin_req; |
| u32 admin_req_q_sz; |
| u16 admin_req_pi; |
| u16 admin_req_ci; |
| void *admin_req_base; |
| dma_addr_t admin_req_dma; |
| spinlock_t admin_req_lock; |
| |
| u16 num_admin_replies; |
| u32 admin_reply_q_sz; |
| u16 admin_reply_ci; |
| u8 admin_reply_ephase; |
| void *admin_reply_base; |
| dma_addr_t admin_reply_dma; |
| atomic_t admin_reply_q_in_use; |
| |
| u32 ready_timeout; |
| |
| struct mpi3mr_intr_info *intr_info; |
| u16 intr_info_count; |
| bool is_intr_info_set; |
| |
| u16 num_queues; |
| u16 num_op_req_q; |
| struct op_req_qinfo *req_qinfo; |
| |
| u16 num_op_reply_q; |
| struct op_reply_qinfo *op_reply_qinfo; |
| |
| struct mpi3mr_drv_cmd init_cmds; |
| struct mpi3mr_drv_cmd cfg_cmds; |
| struct mpi3mr_ioc_facts facts; |
| u16 op_reply_desc_sz; |
| |
| u32 num_reply_bufs; |
| struct dma_pool *reply_buf_pool; |
| u8 *reply_buf; |
| dma_addr_t reply_buf_dma; |
| dma_addr_t reply_buf_dma_max_address; |
| |
| u16 reply_free_qsz; |
| u16 reply_sz; |
| struct dma_pool *reply_free_q_pool; |
| __le64 *reply_free_q; |
| dma_addr_t reply_free_q_dma; |
| spinlock_t reply_free_queue_lock; |
| u32 reply_free_queue_host_index; |
| |
| u32 num_sense_bufs; |
| struct dma_pool *sense_buf_pool; |
| u8 *sense_buf; |
| dma_addr_t sense_buf_dma; |
| |
| u16 sense_buf_q_sz; |
| struct dma_pool *sense_buf_q_pool; |
| __le64 *sense_buf_q; |
| dma_addr_t sense_buf_q_dma; |
| spinlock_t sbq_lock; |
| u32 sbq_host_index; |
| u32 event_masks[MPI3_EVENT_NOTIFY_EVENTMASK_WORDS]; |
| |
| char fwevt_worker_name[MPI3MR_NAME_LENGTH]; |
| struct workqueue_struct *fwevt_worker_thread; |
| spinlock_t fwevt_lock; |
| struct list_head fwevt_list; |
| |
| char watchdog_work_q_name[20]; |
| struct workqueue_struct *watchdog_work_q; |
| struct delayed_work watchdog_work; |
| spinlock_t watchdog_lock; |
| |
| u8 is_driver_loading; |
| u8 scan_started; |
| u16 scan_failed; |
| u8 stop_drv_processing; |
| u8 device_refresh_on; |
| |
| u16 max_host_ios; |
| spinlock_t tgtdev_lock; |
| struct list_head tgtdev_list; |
| |
| u32 chain_buf_count; |
| struct dma_pool *chain_buf_pool; |
| struct chain_element *chain_sgl_list; |
| void *chain_bitmap; |
| spinlock_t chain_buf_lock; |
| |
| struct mpi3mr_drv_cmd bsg_cmds; |
| struct mpi3mr_drv_cmd host_tm_cmds; |
| struct mpi3mr_drv_cmd dev_rmhs_cmds[MPI3MR_NUM_DEVRMCMD]; |
| struct mpi3mr_drv_cmd evtack_cmds[MPI3MR_NUM_EVTACKCMD]; |
| void *devrem_bitmap; |
| u16 dev_handle_bitmap_bits; |
| void *removepend_bitmap; |
| struct list_head delayed_rmhs_list; |
| void *evtack_cmds_bitmap; |
| struct list_head delayed_evtack_cmds_list; |
| |
| u32 ts_update_counter; |
| u8 reset_in_progress; |
| u8 unrecoverable; |
| int prev_reset_result; |
| struct mutex reset_mutex; |
| wait_queue_head_t reset_waitq; |
| |
| u8 prepare_for_reset; |
| u16 prepare_for_reset_timeout_counter; |
| |
| void *prp_list_virt; |
| dma_addr_t prp_list_dma; |
| u32 prp_sz; |
| |
| u16 diagsave_timeout; |
| int logging_level; |
| u16 flush_io_count; |
| |
| struct mpi3mr_fwevt *current_event; |
| struct mpi3_driver_info_layout driver_info; |
| u16 change_count; |
| |
| u8 pel_enabled; |
| u8 pel_abort_requested; |
| u8 pel_class; |
| u16 pel_locale; |
| struct mpi3mr_drv_cmd pel_cmds; |
| struct mpi3mr_drv_cmd pel_abort_cmd; |
| |
| u32 pel_newest_seqnum; |
| void *pel_seqnum_virt; |
| dma_addr_t pel_seqnum_dma; |
| u32 pel_seqnum_sz; |
| |
| u16 op_reply_q_offset; |
| u16 default_qcount; |
| u16 active_poll_qcount; |
| u16 requested_poll_qcount; |
| |
| struct device bsg_dev; |
| struct request_queue *bsg_queue; |
| u8 stop_bsgs; |
| u8 *logdata_buf; |
| u16 logdata_buf_idx; |
| u16 logdata_entry_sz; |
| |
| atomic_t pend_large_data_sz; |
| u32 io_throttle_data_length; |
| u32 io_throttle_high; |
| u32 io_throttle_low; |
| u16 num_io_throttle_group; |
| struct mpi3mr_throttle_group_info *throttle_groups; |
| |
| void *cfg_page; |
| dma_addr_t cfg_page_dma; |
| u16 cfg_page_sz; |
| |
| u8 sas_transport_enabled; |
| u8 scsi_device_channel; |
| struct mpi3mr_drv_cmd transport_cmds; |
| struct mpi3mr_sas_node sas_hba; |
| struct list_head sas_expander_list; |
| spinlock_t sas_node_lock; |
| struct list_head hba_port_table_list; |
| struct list_head enclosure_list; |
| }; |
| |
| /** |
| * struct mpi3mr_fwevt - Firmware event structure. |
| * |
| * @list: list head |
| * @work: Work structure |
| * @mrioc: Adapter instance reference |
| * @event_id: MPI3 firmware event ID |
| * @send_ack: Event acknowledgment required or not |
| * @process_evt: Bottomhalf processing required or not |
| * @evt_ctx: Event context to send in Ack |
| * @event_data_size: size of the event data in bytes |
| * @pending_at_sml: waiting for device add/remove API to complete |
| * @discard: discard this event |
| * @ref_count: kref count |
| * @event_data: Actual MPI3 event data |
| */ |
| struct mpi3mr_fwevt { |
| struct list_head list; |
| struct work_struct work; |
| struct mpi3mr_ioc *mrioc; |
| u16 event_id; |
| bool send_ack; |
| bool process_evt; |
| u32 evt_ctx; |
| u16 event_data_size; |
| bool pending_at_sml; |
| bool discard; |
| struct kref ref_count; |
| char event_data[] __aligned(4); |
| }; |
| |
| |
| /** |
| * struct delayed_dev_rmhs_node - Delayed device removal node |
| * |
| * @list: list head |
| * @handle: Device handle |
| * @iou_rc: IO Unit Control Reason Code |
| */ |
| struct delayed_dev_rmhs_node { |
| struct list_head list; |
| u16 handle; |
| u8 iou_rc; |
| }; |
| |
| /** |
| * struct delayed_evt_ack_node - Delayed event ack node |
| * @list: list head |
| * @event: MPI3 event ID |
| * @event_ctx: event context |
| */ |
| struct delayed_evt_ack_node { |
| struct list_head list; |
| u8 event; |
| u32 event_ctx; |
| }; |
| |
| int mpi3mr_setup_resources(struct mpi3mr_ioc *mrioc); |
| void mpi3mr_cleanup_resources(struct mpi3mr_ioc *mrioc); |
| int mpi3mr_init_ioc(struct mpi3mr_ioc *mrioc); |
| int mpi3mr_reinit_ioc(struct mpi3mr_ioc *mrioc, u8 is_resume); |
| void mpi3mr_cleanup_ioc(struct mpi3mr_ioc *mrioc); |
| int mpi3mr_issue_port_enable(struct mpi3mr_ioc *mrioc, u8 async); |
| int mpi3mr_admin_request_post(struct mpi3mr_ioc *mrioc, void *admin_req, |
| u16 admin_req_sz, u8 ignore_reset); |
| int mpi3mr_op_request_post(struct mpi3mr_ioc *mrioc, |
| struct op_req_qinfo *opreqq, u8 *req); |
| void mpi3mr_add_sg_single(void *paddr, u8 flags, u32 length, |
| dma_addr_t dma_addr); |
| void mpi3mr_build_zero_len_sge(void *paddr); |
| void *mpi3mr_get_sensebuf_virt_addr(struct mpi3mr_ioc *mrioc, |
| dma_addr_t phys_addr); |
| void *mpi3mr_get_reply_virt_addr(struct mpi3mr_ioc *mrioc, |
| dma_addr_t phys_addr); |
| void mpi3mr_repost_sense_buf(struct mpi3mr_ioc *mrioc, |
| u64 sense_buf_dma); |
| |
| void mpi3mr_memset_buffers(struct mpi3mr_ioc *mrioc); |
| void mpi3mr_free_mem(struct mpi3mr_ioc *mrioc); |
| void mpi3mr_os_handle_events(struct mpi3mr_ioc *mrioc, |
| struct mpi3_event_notification_reply *event_reply); |
| void mpi3mr_process_op_reply_desc(struct mpi3mr_ioc *mrioc, |
| struct mpi3_default_reply_descriptor *reply_desc, |
| u64 *reply_dma, u16 qidx); |
| void mpi3mr_start_watchdog(struct mpi3mr_ioc *mrioc); |
| void mpi3mr_stop_watchdog(struct mpi3mr_ioc *mrioc); |
| |
| int mpi3mr_soft_reset_handler(struct mpi3mr_ioc *mrioc, |
| u32 reset_reason, u8 snapdump); |
| void mpi3mr_ioc_disable_intr(struct mpi3mr_ioc *mrioc); |
| void mpi3mr_ioc_enable_intr(struct mpi3mr_ioc *mrioc); |
| |
| enum mpi3mr_iocstate mpi3mr_get_iocstate(struct mpi3mr_ioc *mrioc); |
| int mpi3mr_process_event_ack(struct mpi3mr_ioc *mrioc, u8 event, |
| u32 event_ctx); |
| |
| void mpi3mr_wait_for_host_io(struct mpi3mr_ioc *mrioc, u32 timeout); |
| void mpi3mr_cleanup_fwevt_list(struct mpi3mr_ioc *mrioc); |
| void mpi3mr_flush_host_io(struct mpi3mr_ioc *mrioc); |
| void mpi3mr_invalidate_devhandles(struct mpi3mr_ioc *mrioc); |
| void mpi3mr_rfresh_tgtdevs(struct mpi3mr_ioc *mrioc); |
| void mpi3mr_flush_delayed_cmd_lists(struct mpi3mr_ioc *mrioc); |
| void mpi3mr_check_rh_fault_ioc(struct mpi3mr_ioc *mrioc, u32 reason_code); |
| void mpi3mr_print_fault_info(struct mpi3mr_ioc *mrioc); |
| void mpi3mr_check_rh_fault_ioc(struct mpi3mr_ioc *mrioc, u32 reason_code); |
| int mpi3mr_process_op_reply_q(struct mpi3mr_ioc *mrioc, |
| struct op_reply_qinfo *op_reply_q); |
| int mpi3mr_blk_mq_poll(struct Scsi_Host *shost, unsigned int queue_num); |
| void mpi3mr_bsg_init(struct mpi3mr_ioc *mrioc); |
| void mpi3mr_bsg_exit(struct mpi3mr_ioc *mrioc); |
| int mpi3mr_issue_tm(struct mpi3mr_ioc *mrioc, u8 tm_type, |
| u16 handle, uint lun, u16 htag, ulong timeout, |
| struct mpi3mr_drv_cmd *drv_cmd, |
| u8 *resp_code, struct scsi_cmnd *scmd); |
| struct mpi3mr_tgt_dev *mpi3mr_get_tgtdev_by_handle( |
| struct mpi3mr_ioc *mrioc, u16 handle); |
| void mpi3mr_pel_get_seqnum_complete(struct mpi3mr_ioc *mrioc, |
| struct mpi3mr_drv_cmd *drv_cmd); |
| int mpi3mr_pel_get_seqnum_post(struct mpi3mr_ioc *mrioc, |
| struct mpi3mr_drv_cmd *drv_cmd); |
| void mpi3mr_app_save_logdata(struct mpi3mr_ioc *mrioc, char *event_data, |
| u16 event_data_size); |
| struct mpi3mr_enclosure_node *mpi3mr_enclosure_find_by_handle( |
| struct mpi3mr_ioc *mrioc, u16 handle); |
| extern const struct attribute_group *mpi3mr_host_groups[]; |
| extern const struct attribute_group *mpi3mr_dev_groups[]; |
| |
| extern struct sas_function_template mpi3mr_transport_functions; |
| extern struct scsi_transport_template *mpi3mr_transport_template; |
| |
| int mpi3mr_cfg_get_dev_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status, |
| struct mpi3_device_page0 *dev_pg0, u16 pg_sz, u32 form, u32 form_spec); |
| int mpi3mr_cfg_get_sas_phy_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status, |
| struct mpi3_sas_phy_page0 *phy_pg0, u16 pg_sz, u32 form, |
| u32 form_spec); |
| int mpi3mr_cfg_get_sas_phy_pg1(struct mpi3mr_ioc *mrioc, u16 *ioc_status, |
| struct mpi3_sas_phy_page1 *phy_pg1, u16 pg_sz, u32 form, |
| u32 form_spec); |
| int mpi3mr_cfg_get_sas_exp_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status, |
| struct mpi3_sas_expander_page0 *exp_pg0, u16 pg_sz, u32 form, |
| u32 form_spec); |
| int mpi3mr_cfg_get_sas_exp_pg1(struct mpi3mr_ioc *mrioc, u16 *ioc_status, |
| struct mpi3_sas_expander_page1 *exp_pg1, u16 pg_sz, u32 form, |
| u32 form_spec); |
| int mpi3mr_cfg_get_enclosure_pg0(struct mpi3mr_ioc *mrioc, u16 *ioc_status, |
| struct mpi3_enclosure_page0 *encl_pg0, u16 pg_sz, u32 form, |
| u32 form_spec); |
| int mpi3mr_cfg_get_sas_io_unit_pg0(struct mpi3mr_ioc *mrioc, |
| struct mpi3_sas_io_unit_page0 *sas_io_unit_pg0, u16 pg_sz); |
| int mpi3mr_cfg_get_sas_io_unit_pg1(struct mpi3mr_ioc *mrioc, |
| struct mpi3_sas_io_unit_page1 *sas_io_unit_pg1, u16 pg_sz); |
| int mpi3mr_cfg_set_sas_io_unit_pg1(struct mpi3mr_ioc *mrioc, |
| struct mpi3_sas_io_unit_page1 *sas_io_unit_pg1, u16 pg_sz); |
| int mpi3mr_cfg_get_driver_pg1(struct mpi3mr_ioc *mrioc, |
| struct mpi3_driver_page1 *driver_pg1, u16 pg_sz); |
| |
| u8 mpi3mr_is_expander_device(u16 device_info); |
| int mpi3mr_expander_add(struct mpi3mr_ioc *mrioc, u16 handle); |
| void mpi3mr_expander_remove(struct mpi3mr_ioc *mrioc, u64 sas_address, |
| struct mpi3mr_hba_port *hba_port); |
| struct mpi3mr_sas_node *__mpi3mr_expander_find_by_handle(struct mpi3mr_ioc |
| *mrioc, u16 handle); |
| struct mpi3mr_hba_port *mpi3mr_get_hba_port_by_id(struct mpi3mr_ioc *mrioc, |
| u8 port_id); |
| void mpi3mr_sas_host_refresh(struct mpi3mr_ioc *mrioc); |
| void mpi3mr_sas_host_add(struct mpi3mr_ioc *mrioc); |
| void mpi3mr_update_links(struct mpi3mr_ioc *mrioc, |
| u64 sas_address_parent, u16 handle, u8 phy_number, u8 link_rate, |
| struct mpi3mr_hba_port *hba_port); |
| void mpi3mr_remove_tgtdev_from_host(struct mpi3mr_ioc *mrioc, |
| struct mpi3mr_tgt_dev *tgtdev); |
| int mpi3mr_report_tgtdev_to_sas_transport(struct mpi3mr_ioc *mrioc, |
| struct mpi3mr_tgt_dev *tgtdev); |
| void mpi3mr_remove_tgtdev_from_sas_transport(struct mpi3mr_ioc *mrioc, |
| struct mpi3mr_tgt_dev *tgtdev); |
| struct mpi3mr_tgt_dev *__mpi3mr_get_tgtdev_by_addr_and_rphy( |
| struct mpi3mr_ioc *mrioc, u64 sas_address, struct sas_rphy *rphy); |
| void mpi3mr_print_device_event_notice(struct mpi3mr_ioc *mrioc, |
| bool device_add); |
| void mpi3mr_refresh_sas_ports(struct mpi3mr_ioc *mrioc); |
| void mpi3mr_refresh_expanders(struct mpi3mr_ioc *mrioc); |
| void mpi3mr_add_event_wait_for_device_refresh(struct mpi3mr_ioc *mrioc); |
| void mpi3mr_flush_drv_cmds(struct mpi3mr_ioc *mrioc); |
| void mpi3mr_flush_cmds_for_unrecovered_controller(struct mpi3mr_ioc *mrioc); |
| void mpi3mr_free_enclosure_list(struct mpi3mr_ioc *mrioc); |
| int mpi3mr_process_admin_reply_q(struct mpi3mr_ioc *mrioc); |
| void mpi3mr_expander_node_remove(struct mpi3mr_ioc *mrioc, |
| struct mpi3mr_sas_node *sas_expander); |
| #endif /*MPI3MR_H_INCLUDED*/ |
