mei: fix syntax in comments and debug output
Fix syntax errors in comments and debug strings
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/misc/mei/amthif.c b/drivers/misc/mei/amthif.c
index 29fcd57..2fad844 100644
--- a/drivers/misc/mei/amthif.c
+++ b/drivers/misc/mei/amthif.c
@@ -177,7 +177,7 @@
unsigned long timeout;
int i;
- /* Only Posible if we are in timeout */
+ /* Only possible if we are in timeout */
if (!cl || cl != &dev->iamthif_cl) {
dev_dbg(&dev->pdev->dev, "bad file ext.\n");
return -ETIMEDOUT;
@@ -249,7 +249,7 @@
cb->response_buffer.size);
dev_dbg(&dev->pdev->dev, "amthif cb->buf_idx - %lu\n", cb->buf_idx);
- /* length is being turncated to PAGE_SIZE, however,
+ /* length is being truncated to PAGE_SIZE, however,
* the buf_idx may point beyond */
length = min_t(size_t, length, (cb->buf_idx - *offset));
diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c
index f84d332..4f268a3 100644
--- a/drivers/misc/mei/client.c
+++ b/drivers/misc/mei/client.c
@@ -154,7 +154,7 @@
return 0;
}
/**
- * mei_io_cb_alloc_resp_buf - allocate respose buffer
+ * mei_io_cb_alloc_resp_buf - allocate response buffer
*
* @cb: io callback structure
* @length: size of the buffer
@@ -207,7 +207,7 @@
/**
- * mei_cl_init - initializes intialize cl.
+ * mei_cl_init - initializes cl.
*
* @cl: host client to be initialized
* @dev: mei device
@@ -263,10 +263,10 @@
return NULL;
}
-/** mei_cl_link: allocte host id in the host map
+/** mei_cl_link: allocate host id in the host map
*
* @cl - host client
- * @id - fixed host id or -1 for genereting one
+ * @id - fixed host id or -1 for generic one
*
* returns 0 on success
* -EINVAL on incorrect values
@@ -282,19 +282,19 @@
dev = cl->dev;
- /* If Id is not asigned get one*/
+ /* If Id is not assigned get one*/
if (id == MEI_HOST_CLIENT_ID_ANY)
id = find_first_zero_bit(dev->host_clients_map,
MEI_CLIENTS_MAX);
if (id >= MEI_CLIENTS_MAX) {
- dev_err(&dev->pdev->dev, "id exceded %d", MEI_CLIENTS_MAX) ;
+ dev_err(&dev->pdev->dev, "id exceeded %d", MEI_CLIENTS_MAX);
return -EMFILE;
}
open_handle_count = dev->open_handle_count + dev->iamthif_open_count;
if (open_handle_count >= MEI_MAX_OPEN_HANDLE_COUNT) {
- dev_err(&dev->pdev->dev, "open_handle_count exceded %d",
+ dev_err(&dev->pdev->dev, "open_handle_count exceeded %d",
MEI_MAX_OPEN_HANDLE_COUNT);
return -EMFILE;
}
@@ -376,7 +376,7 @@
/**
- * mei_cl_disconnect - disconnect host clinet form the me one
+ * mei_cl_disconnect - disconnect host client from the me one
*
* @cl: host client
*
@@ -455,7 +455,7 @@
*
* @cl: private data of the file object
*
- * returns ture if other client is connected, 0 - otherwise.
+ * returns true if other client is connected, false - otherwise.
*/
bool mei_cl_is_other_connecting(struct mei_cl *cl)
{
@@ -479,7 +479,7 @@
}
/**
- * mei_cl_connect - connect host clinet to the me one
+ * mei_cl_connect - connect host client to the me one
*
* @cl: host client
*
@@ -774,7 +774,7 @@
* @cl: host client
* @cl: write callback with filled data
*
- * returns numbe of bytes sent on success, <0 on failure.
+ * returns number of bytes sent on success, <0 on failure.
*/
int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, bool blocking)
{
diff --git a/drivers/misc/mei/debugfs.c b/drivers/misc/mei/debugfs.c
index e3870f2..a3ae154 100644
--- a/drivers/misc/mei/debugfs.c
+++ b/drivers/misc/mei/debugfs.c
@@ -43,7 +43,7 @@
mutex_lock(&dev->device_lock);
- /* if the driver is not enabled the list won't b consitent */
+ /* if the driver is not enabled the list won't be consistent */
if (dev->dev_state != MEI_DEV_ENABLED)
goto out;
@@ -101,7 +101,7 @@
/**
* mei_dbgfs_deregister - Remove the debugfs files and directories
- * @mei - pointer to mei device private dat
+ * @mei - pointer to mei device private data
*/
void mei_dbgfs_deregister(struct mei_device *dev)
{
diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c
index 836f92d..8520cdf 100644
--- a/drivers/misc/mei/hbm.c
+++ b/drivers/misc/mei/hbm.c
@@ -83,12 +83,12 @@
}
/**
- * same_disconn_addr - tells if they have the same address
+ * mei_hbm_cl_addr_equal - tells if they have the same address
*
- * @file: private data of the file object.
- * @disconn: disconnection request.
+ * @cl: - client
+ * @buf: buffer with cl header
*
- * returns true if addres are same
+ * returns true if addresses are the same
*/
static inline
bool mei_hbm_cl_addr_equal(struct mei_cl *cl, void *buf)
@@ -283,7 +283,7 @@
}
/**
- * mei_hbm_stop_req_prepare - perpare stop request message
+ * mei_hbm_stop_req_prepare - prepare stop request message
*
* @dev - mei device
* @mei_hdr - mei message header
@@ -304,7 +304,7 @@
}
/**
- * mei_hbm_cl_flow_control_req - sends flow control requst.
+ * mei_hbm_cl_flow_control_req - sends flow control request.
*
* @dev: the device structure
* @cl: client info
@@ -466,7 +466,7 @@
}
/**
- * mei_hbm_cl_connect_res - connect resposne from the ME
+ * mei_hbm_cl_connect_res - connect response from the ME
*
* @dev: the device structure
* @rs: connect response bus message
@@ -520,8 +520,8 @@
/**
- * mei_hbm_fw_disconnect_req - disconnect request initiated by me
- * host sends disoconnect response
+ * mei_hbm_fw_disconnect_req - disconnect request initiated by ME firmware
+ * host sends disconnect response
*
* @dev: the device structure.
* @disconnect_req: disconnect request bus message from the me
diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c
index 206dbe9..2a7277d 100644
--- a/drivers/misc/mei/interrupt.c
+++ b/drivers/misc/mei/interrupt.c
@@ -31,7 +31,7 @@
/**
- * mei_irq_compl_handler - dispatch complete handelers
+ * mei_irq_compl_handler - dispatch complete handlers
* for the completed callbacks
*
* @dev - mei device
@@ -338,7 +338,7 @@
goto reset_slots;
}
- /* find recepient cl */
+ /* find recipient cl */
list_for_each_entry(cl, &dev->file_list, link) {
if (mei_cl_hbm_equal(cl, mei_hdr)) {
cl_dbg(dev, cl, "got a message\n");
@@ -346,7 +346,7 @@
}
}
- /* if no recepient cl was found we assume corrupted header\n */
+ /* if no recipient cl was found we assume corrupted header */
if (&cl->link == &dev->file_list) {
dev_err(&dev->pdev->dev, "no destination client found 0x%08X\n",
dev->rd_msg_hdr);
diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c
index 9661a81..5424f8f 100644
--- a/drivers/misc/mei/main.c
+++ b/drivers/misc/mei/main.c
@@ -48,7 +48,7 @@
*
* @inode: pointer to inode structure
* @file: pointer to file structure
- e
+ *
* returns 0 on success, <0 on error
*/
static int mei_open(struct inode *inode, struct file *file)
diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h
index 3f242e1..2c76928 100644
--- a/drivers/misc/mei/mei_dev.h
+++ b/drivers/misc/mei/mei_dev.h
@@ -65,7 +65,7 @@
* that can be opened to the driver.
*
* Limit to 255: 256 Total Clients
- * minus internal client for MEI Bus Messags
+ * minus internal client for MEI Bus Messages
*/
#define MEI_MAX_OPEN_HANDLE_COUNT (MEI_CLIENTS_MAX - 1)
@@ -181,7 +181,7 @@
u32 internal:1;
};
-/* MEI client instance carried as file->pirvate_data*/
+/* MEI client instance carried as file->private_data*/
struct mei_cl {
struct list_head link;
struct mei_device *dev;
diff --git a/drivers/misc/mei/nfc.c b/drivers/misc/mei/nfc.c
index 5496190..a58320c 100644
--- a/drivers/misc/mei/nfc.c
+++ b/drivers/misc/mei/nfc.c
@@ -92,7 +92,7 @@
* @cl: NFC host client
* @cl_info: NFC info host client
* @init_work: perform connection to the info client
- * @fw_ivn: NFC Intervace Version Number
+ * @fw_ivn: NFC Interface Version Number
* @vendor_id: NFC manufacturer ID
* @radio_type: NFC radio type
*/
@@ -163,7 +163,7 @@
return 0;
default:
- dev_err(&dev->pdev->dev, "Unknow radio type 0x%x\n",
+ dev_err(&dev->pdev->dev, "Unknown radio type 0x%x\n",
ndev->radio_type);
return -EINVAL;
@@ -175,14 +175,14 @@
ndev->bus_name = "pn544";
return 0;
default:
- dev_err(&dev->pdev->dev, "Unknow radio type 0x%x\n",
+ dev_err(&dev->pdev->dev, "Unknown radio type 0x%x\n",
ndev->radio_type);
return -EINVAL;
}
default:
- dev_err(&dev->pdev->dev, "Unknow vendor ID 0x%x\n",
+ dev_err(&dev->pdev->dev, "Unknown vendor ID 0x%x\n",
ndev->vendor_id);
return -EINVAL;
@@ -428,7 +428,7 @@
mutex_unlock(&dev->device_lock);
if (mei_nfc_if_version(ndev) < 0) {
- dev_err(&dev->pdev->dev, "Could not get the NFC interfave version");
+ dev_err(&dev->pdev->dev, "Could not get the NFC interface version");
goto err;
}
@@ -483,7 +483,7 @@
struct mei_cl *cl_info, *cl = NULL;
int i, ret;
- /* already initialzed */
+ /* already initialized */
if (ndev->cl_info)
return 0;
