Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
diff --git a/drivers/net/can/sja1000/sja1000_of_platform.c b/drivers/net/can/sja1000/sja1000_of_platform.c
index aa953fb..3373560 100644
--- a/drivers/net/can/sja1000/sja1000_of_platform.c
+++ b/drivers/net/can/sja1000/sja1000_of_platform.c
@@ -108,15 +108,17 @@
res_size = resource_size(&res);
if (!request_mem_region(res.start, res_size, DRV_NAME)) {
- dev_err(&ofdev->dev, "couldn't request %#x..%#x\n",
- res.start, res.end);
+ dev_err(&ofdev->dev, "couldn't request %#llx..%#llx\n",
+ (unsigned long long)res.start,
+ (unsigned long long)res.end);
return -EBUSY;
}
base = ioremap_nocache(res.start, res_size);
if (!base) {
- dev_err(&ofdev->dev, "couldn't ioremap %#x..%#x\n",
- res.start, res.end);
+ dev_err(&ofdev->dev, "couldn't ioremap %#llx..%#llx\n",
+ (unsigned long long)res.start,
+ (unsigned long long)res.end);
err = -ENOMEM;
goto exit_release_mem;
}
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index e186071..5eb52ca 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -65,6 +65,17 @@
#define DB_PAGE_SIZE 4096
+/* MPI test register definitions. This register
+ * is used for determining alternate NIC function's
+ * PCI->func number.
+ */
+enum {
+ MPI_TEST_FUNC_PORT_CFG = 0x1002,
+ MPI_TEST_NIC1_FUNC_SHIFT = 1,
+ MPI_TEST_NIC2_FUNC_SHIFT = 5,
+ MPI_TEST_NIC_FUNC_MASK = 0x00000007,
+};
+
/*
* Processor Address Register (PROC_ADDR) bit definitions.
*/
@@ -1430,7 +1441,10 @@
/* Hardware information */
u32 chip_rev_id;
+ u32 fw_rev_id;
u32 func; /* PCI function for this adapter */
+ u32 alt_func; /* PCI function for alternate adapter */
+ u32 port; /* Port number this adapter */
spinlock_t adapter_lock;
spinlock_t hw_lock;
@@ -1580,6 +1594,8 @@
void ql_mpi_port_cfg_work(struct work_struct *work);
int ql_mb_get_fw_state(struct ql_adapter *qdev);
int ql_cam_route_initialize(struct ql_adapter *qdev);
+int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data);
+int ql_mb_about_fw(struct ql_adapter *qdev);
#if 1
#define QL_ALL_DUMP
diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c
index 913b2a5..37c99fe 100644
--- a/drivers/net/qlge/qlge_ethtool.c
+++ b/drivers/net/qlge/qlge_ethtool.c
@@ -293,7 +293,10 @@
struct ql_adapter *qdev = netdev_priv(ndev);
strncpy(drvinfo->driver, qlge_driver_name, 32);
strncpy(drvinfo->version, qlge_driver_version, 32);
- strncpy(drvinfo->fw_version, "N/A", 32);
+ snprintf(drvinfo->fw_version, 32, "v%d.%d.%d",
+ (qdev->fw_rev_id & 0x00ff0000) >> 16,
+ (qdev->fw_rev_id & 0x0000ff00) >> 8,
+ (qdev->fw_rev_id & 0x000000ff));
strncpy(drvinfo->bus_info, pci_name(qdev->pdev), 32);
drvinfo->n_stats = 0;
drvinfo->testinfo_len = 0;
@@ -401,6 +404,7 @@
.get_rx_csum = ql_get_rx_csum,
.set_rx_csum = ql_set_rx_csum,
.get_tx_csum = ethtool_op_get_tx_csum,
+ .set_tx_csum = ethtool_op_set_tx_csum,
.get_sg = ethtool_op_get_sg,
.set_sg = ethtool_op_set_sg,
.get_tso = ethtool_op_get_tso,
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 0b0778d9..024c734 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -675,11 +675,12 @@
int status;
__le32 *p = (__le32 *)&qdev->flash;
u32 offset;
+ u8 mac_addr[6];
/* Get flash offset for function and adjust
* for dword access.
*/
- if (!qdev->func)
+ if (!qdev->port)
offset = FUNC0_FLASH_OFFSET / sizeof(u32);
else
offset = FUNC1_FLASH_OFFSET / sizeof(u32);
@@ -705,14 +706,26 @@
goto exit;
}
- if (!is_valid_ether_addr(qdev->flash.flash_params_8000.mac_addr)) {
+ /* Extract either manufacturer or BOFM modified
+ * MAC address.
+ */
+ if (qdev->flash.flash_params_8000.data_type1 == 2)
+ memcpy(mac_addr,
+ qdev->flash.flash_params_8000.mac_addr1,
+ qdev->ndev->addr_len);
+ else
+ memcpy(mac_addr,
+ qdev->flash.flash_params_8000.mac_addr,
+ qdev->ndev->addr_len);
+
+ if (!is_valid_ether_addr(mac_addr)) {
QPRINTK(qdev, IFUP, ERR, "Invalid MAC address.\n");
status = -EINVAL;
goto exit;
}
memcpy(qdev->ndev->dev_addr,
- qdev->flash.flash_params_8000.mac_addr,
+ mac_addr,
qdev->ndev->addr_len);
exit:
@@ -731,7 +744,7 @@
/* Second function's parameters follow the first
* function's.
*/
- if (qdev->func)
+ if (qdev->port)
offset = size;
if (ql_sem_spinlock(qdev, SEM_FLASH_MASK))
@@ -837,6 +850,13 @@
static int ql_8000_port_initialize(struct ql_adapter *qdev)
{
int status;
+ /*
+ * Get MPI firmware version for driver banner
+ * and ethool info.
+ */
+ status = ql_mb_about_fw(qdev);
+ if (status)
+ goto exit;
status = ql_mb_get_fw_state(qdev);
if (status)
goto exit;
@@ -1518,6 +1538,22 @@
return;
}
+ /* Frame error, so drop the packet. */
+ if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) {
+ QPRINTK(qdev, DRV, ERR, "Receive error, flags2 = 0x%x\n",
+ ib_mac_rsp->flags2);
+ dev_kfree_skb_any(skb);
+ return;
+ }
+
+ /* The max framesize filter on this chip is set higher than
+ * MTU since FCoE uses 2k frames.
+ */
+ if (skb->len > ndev->mtu + ETH_HLEN) {
+ dev_kfree_skb_any(skb);
+ return;
+ }
+
prefetch(skb->data);
skb->dev = ndev;
if (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) {
@@ -1540,7 +1576,6 @@
* csum or frame errors.
*/
if (qdev->rx_csum &&
- !(ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) &&
!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
/* TCP frame. */
if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
@@ -3185,9 +3220,10 @@
struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev);
QPRINTK(qdev, PROBE, INFO,
- "Function #%d, NIC Roll %d, NIC Rev = %d, "
+ "Function #%d, Port %d, NIC Roll %d, NIC Rev = %d, "
"XG Roll = %d, XG Rev = %d.\n",
qdev->func,
+ qdev->port,
qdev->chip_rev_id & 0x0000000f,
qdev->chip_rev_id >> 4 & 0x0000000f,
qdev->chip_rev_id >> 8 & 0x0000000f,
@@ -3263,7 +3299,6 @@
err = ql_adapter_initialize(qdev);
if (err) {
QPRINTK(qdev, IFUP, INFO, "Unable to initialize adapter.\n");
- spin_unlock(&qdev->hw_lock);
goto err_init;
}
set_bit(QL_ADAPTER_UP, &qdev->flags);
@@ -3360,7 +3395,6 @@
* completion handler rx_rings.
*/
qdev->rx_ring_count = qdev->tx_ring_count + qdev->rss_ring_count + 1;
- netif_set_gso_max_size(qdev->ndev, 65536);
for (i = 0; i < qdev->tx_ring_count; i++) {
tx_ring = &qdev->tx_ring[i];
@@ -3643,12 +3677,53 @@
.port_initialize = ql_8000_port_initialize,
};
-
-static void ql_get_board_info(struct ql_adapter *qdev)
+/* Find the pcie function number for the other NIC
+ * on this chip. Since both NIC functions share a
+ * common firmware we have the lowest enabled function
+ * do any common work. Examples would be resetting
+ * after a fatal firmware error, or doing a firmware
+ * coredump.
+ */
+static int ql_get_alt_pcie_func(struct ql_adapter *qdev)
{
+ int status = 0;
+ u32 temp;
+ u32 nic_func1, nic_func2;
+
+ status = ql_read_mpi_reg(qdev, MPI_TEST_FUNC_PORT_CFG,
+ &temp);
+ if (status)
+ return status;
+
+ nic_func1 = ((temp >> MPI_TEST_NIC1_FUNC_SHIFT) &
+ MPI_TEST_NIC_FUNC_MASK);
+ nic_func2 = ((temp >> MPI_TEST_NIC2_FUNC_SHIFT) &
+ MPI_TEST_NIC_FUNC_MASK);
+
+ if (qdev->func == nic_func1)
+ qdev->alt_func = nic_func2;
+ else if (qdev->func == nic_func2)
+ qdev->alt_func = nic_func1;
+ else
+ status = -EIO;
+
+ return status;
+}
+
+static int ql_get_board_info(struct ql_adapter *qdev)
+{
+ int status;
qdev->func =
(ql_read32(qdev, STS) & STS_FUNC_ID_MASK) >> STS_FUNC_ID_SHIFT;
- if (qdev->func) {
+ if (qdev->func > 3)
+ return -EIO;
+
+ status = ql_get_alt_pcie_func(qdev);
+ if (status)
+ return status;
+
+ qdev->port = (qdev->func < qdev->alt_func) ? 0 : 1;
+ if (qdev->port) {
qdev->xg_sem_mask = SEM_XGMAC1_MASK;
qdev->port_link_up = STS_PL1;
qdev->port_init = STS_PI1;
@@ -3667,6 +3742,7 @@
qdev->nic_ops = &qla8012_nic_ops;
else if (qdev->device_id == QLGE_DEVICE_ID_8000)
qdev->nic_ops = &qla8000_nic_ops;
+ return status;
}
static void ql_release_all(struct pci_dev *pdev)
@@ -3761,7 +3837,12 @@
qdev->ndev = ndev;
qdev->pdev = pdev;
- ql_get_board_info(qdev);
+ err = ql_get_board_info(qdev);
+ if (err) {
+ dev_err(&pdev->dev, "Register access failed.\n");
+ err = -EIO;
+ goto err_out;
+ }
qdev->msg_enable = netif_msg_init(debug, default_msg);
spin_lock_init(&qdev->hw_lock);
spin_lock_init(&qdev->stats_lock);
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index 3bd60a4..a67c14a 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -547,6 +547,40 @@
return status;
}
+
+/* Get MPI firmware version. This will be used for
+ * driver banner and for ethtool info.
+ * Returns zero on success.
+ */
+int ql_mb_about_fw(struct ql_adapter *qdev)
+{
+ struct mbox_params mbc;
+ struct mbox_params *mbcp = &mbc;
+ int status = 0;
+
+ memset(mbcp, 0, sizeof(struct mbox_params));
+
+ mbcp->in_count = 1;
+ mbcp->out_count = 3;
+
+ mbcp->mbox_in[0] = MB_CMD_ABOUT_FW;
+
+ status = ql_mailbox_command(qdev, mbcp);
+ if (status)
+ return status;
+
+ if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+ QPRINTK(qdev, DRV, ERR,
+ "Failed about firmware command\n");
+ status = -EIO;
+ }
+
+ /* Store the firmware version */
+ qdev->fw_rev_id = mbcp->mbox_out[1];
+
+ return status;
+}
+
/* Get functional state for MPI firmware.
* Returns zero on success.
*/
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index 714e1c3..fe64908 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -758,7 +758,7 @@
BUG_ON(!hlist_empty(&vlan_group_hash[i]));
unregister_pernet_gen_device(vlan_net_id, &vlan_net_ops);
- synchronize_net();
+ rcu_barrier(); /* Wait for completion of call_rcu()'s */
vlan_gvrp_uninit();
}
diff --git a/net/can/af_can.c b/net/can/af_can.c
index 10f0528..e733725 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -903,6 +903,8 @@
}
spin_unlock(&can_rcvlists_lock);
+ rcu_barrier(); /* Wait for completion of call_rcu()'s */
+
kmem_cache_destroy(rcv_cache);
}
diff --git a/net/ipv4/netfilter/nf_nat_proto_sctp.c b/net/ipv4/netfilter/nf_nat_proto_sctp.c
index 6983e41..3fc598ee 100644
--- a/net/ipv4/netfilter/nf_nat_proto_sctp.c
+++ b/net/ipv4/netfilter/nf_nat_proto_sctp.c
@@ -58,7 +58,7 @@
}
crc32 = sctp_start_cksum((u8 *)hdr, skb_headlen(skb) - hdroff);
- skb_walk_frags(skb, frag);
+ skb_walk_frags(skb, frag)
crc32 = sctp_update_cksum((u8 *)frag->data, skb_headlen(frag),
crc32);
crc32 = sctp_end_cksum(crc32);
diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c
index 8c86011..71daa09 100644
--- a/net/netfilter/nfnetlink_queue.c
+++ b/net/netfilter/nfnetlink_queue.c
@@ -1,6 +1,6 @@
/*
* This is a module which is used for queueing packets and communicating with
- * userspace via nfetlink.
+ * userspace via nfnetlink.
*
* (C) 2005 by Harald Welte <laforge@netfilter.org>
* (C) 2007 by Patrick McHardy <kaber@trash.net>
@@ -932,6 +932,8 @@
#endif
nfnetlink_subsys_unregister(&nfqnl_subsys);
netlink_unregister_notifier(&nfqnl_rtnl_notifier);
+
+ rcu_barrier(); /* Wait for completion of call_rcu()'s */
}
MODULE_DESCRIPTION("netfilter packet queue handler");
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index cb2c50d..79cbd47 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -1370,6 +1370,8 @@
sctp_proc_exit();
cleanup_sctp_mibs();
+ rcu_barrier(); /* Wait for completion of call_rcu()'s */
+
kmem_cache_destroy(sctp_chunk_cachep);
kmem_cache_destroy(sctp_bucket_cachep);
}
diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index e630b38..66d458f 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -1548,6 +1548,7 @@
{
gss_svc_shutdown();
rpcauth_unregister(&authgss_ops);
+ rcu_barrier(); /* Wait for completion of call_rcu()'s */
}
MODULE_LICENSE("GPL");
