hwmon: (emc1403) Make all hyst attributes except for temp1_crit_hyst read-only
All chips in this chip series only support a single hysteresis value. Having
multiple writable hysteresis attributes is therefore confusing, since a single
write affects all hysteresis temperatures. Make all but one (temp1_crit_hyst)
read-only.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
diff --git a/drivers/hwmon/emc1403.c b/drivers/hwmon/emc1403.c
index f76e550..46220b1 100644
--- a/drivers/hwmon/emc1403.c
+++ b/drivers/hwmon/emc1403.c
@@ -195,8 +195,7 @@
show_bit, NULL, 0x35, 0x02);
static SENSOR_DEVICE_ATTR_2(temp2_crit_alarm, S_IRUGO,
show_bit, NULL, 0x37, 0x02);
-static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO | S_IWUSR,
- show_hyst, store_hyst, 0x19);
+static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_hyst, NULL, 0x19);
static SENSOR_DEVICE_ATTR(temp3_min, S_IRUGO | S_IWUSR,
show_temp, store_temp, 0x16);
@@ -212,8 +211,7 @@
show_bit, NULL, 0x35, 0x04);
static SENSOR_DEVICE_ATTR_2(temp3_crit_alarm, S_IRUGO,
show_bit, NULL, 0x37, 0x04);
-static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO | S_IWUSR,
- show_hyst, store_hyst, 0x1A);
+static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO, show_hyst, NULL, 0x1A);
static SENSOR_DEVICE_ATTR(temp4_min, S_IRUGO | S_IWUSR,
show_temp, store_temp, 0x2D);
@@ -229,8 +227,7 @@
show_bit, NULL, 0x35, 0x08);
static SENSOR_DEVICE_ATTR_2(temp4_crit_alarm, S_IRUGO,
show_bit, NULL, 0x37, 0x08);
-static SENSOR_DEVICE_ATTR(temp4_crit_hyst, S_IRUGO | S_IWUSR,
- show_hyst, store_hyst, 0x30);
+static SENSOR_DEVICE_ATTR(temp4_crit_hyst, S_IRUGO, show_hyst, NULL, 0x30);
static SENSOR_DEVICE_ATTR_2(power_state, S_IRUGO | S_IWUSR,
show_bit, store_bit, 0x03, 0x40);
