mfd: mmc: rtsx: Change default tx phase
The default phase can meet most cards' requirement, but it is not the
optimal one. In some extreme situation, the rx phase point produced by
the following tuning process will drift quite a distance.
Before tuning UHS card, this patch will set a more proper initial tx
phase point, which is calculated from statistic data, and can achieve
a much better tx signal quality.
Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
diff --git a/drivers/mfd/rtl8411.c b/drivers/mfd/rtl8411.c
index e4c1833..5280135 100644
--- a/drivers/mfd/rtl8411.c
+++ b/drivers/mfd/rtl8411.c
@@ -452,6 +452,8 @@
pcr->sd30_drive_sel_1v8 = DRIVER_TYPE_B;
pcr->sd30_drive_sel_3v3 = DRIVER_TYPE_D;
pcr->aspm_en = ASPM_L1_EN;
+ pcr->tx_initial_phase = SET_CLOCK_PHASE(23, 7, 14);
+ pcr->rx_initial_phase = SET_CLOCK_PHASE(4, 3, 10);
pcr->ic_version = rtl8411_get_ic_version(pcr);
pcr->sd_pull_ctl_enable_tbl = rtl8411_sd_pull_ctl_enable_tbl;
@@ -471,6 +473,8 @@
pcr->sd30_drive_sel_1v8 = DRIVER_TYPE_B;
pcr->sd30_drive_sel_3v3 = DRIVER_TYPE_D;
pcr->aspm_en = ASPM_L1_EN;
+ pcr->tx_initial_phase = SET_CLOCK_PHASE(23, 7, 14);
+ pcr->rx_initial_phase = SET_CLOCK_PHASE(4, 3, 10);
pcr->ic_version = rtl8411_get_ic_version(pcr);
diff --git a/drivers/mfd/rts5209.c b/drivers/mfd/rts5209.c
index 4026e1f..cb04174 100644
--- a/drivers/mfd/rts5209.c
+++ b/drivers/mfd/rts5209.c
@@ -270,6 +270,8 @@
pcr->sd30_drive_sel_1v8 = DRIVER_TYPE_B;
pcr->sd30_drive_sel_3v3 = DRIVER_TYPE_D;
pcr->aspm_en = ASPM_L1_EN;
+ pcr->tx_initial_phase = SET_CLOCK_PHASE(27, 27, 16);
+ pcr->rx_initial_phase = SET_CLOCK_PHASE(24, 6, 5);
pcr->ic_version = rts5209_get_ic_version(pcr);
pcr->sd_pull_ctl_enable_tbl = rts5209_sd_pull_ctl_enable_tbl;
diff --git a/drivers/mfd/rts5227.c b/drivers/mfd/rts5227.c
index d7cae82..c001151 100644
--- a/drivers/mfd/rts5227.c
+++ b/drivers/mfd/rts5227.c
@@ -291,6 +291,8 @@
pcr->sd30_drive_sel_1v8 = CFG_DRIVER_TYPE_B;
pcr->sd30_drive_sel_3v3 = CFG_DRIVER_TYPE_B;
pcr->aspm_en = ASPM_L1_EN;
+ pcr->tx_initial_phase = SET_CLOCK_PHASE(27, 27, 15);
+ pcr->rx_initial_phase = SET_CLOCK_PHASE(30, 7, 7);
pcr->sd_pull_ctl_enable_tbl = rts5227_sd_pull_ctl_enable_tbl;
pcr->sd_pull_ctl_disable_tbl = rts5227_sd_pull_ctl_disable_tbl;
diff --git a/drivers/mfd/rts5229.c b/drivers/mfd/rts5229.c
index 620e7fa..6353f5d 100644
--- a/drivers/mfd/rts5229.c
+++ b/drivers/mfd/rts5229.c
@@ -261,6 +261,8 @@
pcr->sd30_drive_sel_1v8 = DRIVER_TYPE_B;
pcr->sd30_drive_sel_3v3 = DRIVER_TYPE_D;
pcr->aspm_en = ASPM_L1_EN;
+ pcr->tx_initial_phase = SET_CLOCK_PHASE(27, 27, 15);
+ pcr->rx_initial_phase = SET_CLOCK_PHASE(30, 6, 6);
pcr->ic_version = rts5229_get_ic_version(pcr);
if (pcr->ic_version == IC_VER_C) {
diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
index ea90f8f..3b835f5 100644
--- a/drivers/mfd/rts5249.c
+++ b/drivers/mfd/rts5249.c
@@ -298,6 +298,8 @@
pcr->sd30_drive_sel_1v8 = CFG_DRIVER_TYPE_C;
pcr->sd30_drive_sel_3v3 = CFG_DRIVER_TYPE_B;
pcr->aspm_en = ASPM_L1_EN;
+ pcr->tx_initial_phase = SET_CLOCK_PHASE(1, 29, 16);
+ pcr->rx_initial_phase = SET_CLOCK_PHASE(24, 6, 5);
pcr->ic_version = rts5249_get_ic_version(pcr);
pcr->sd_pull_ctl_enable_tbl = rts5249_sd_pull_ctl_enable_tbl;
diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
index 82a35b9..fcb368e 100644
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -56,7 +56,6 @@
bool double_clk;
bool eject;
bool initial_mode;
- bool ddr_mode;
int power_state;
#define SDMMC_POWER_ON 1
#define SDMMC_POWER_OFF 0
@@ -475,18 +474,24 @@
kfree(buf);
}
-static int sd_change_phase(struct realtek_pci_sdmmc *host, u8 sample_point)
+static int sd_change_phase(struct realtek_pci_sdmmc *host,
+ u8 sample_point, bool rx)
{
struct rtsx_pcr *pcr = host->pcr;
int err;
- dev_dbg(sdmmc_dev(host), "%s: sample_point = %d\n",
- __func__, sample_point);
+ dev_dbg(sdmmc_dev(host), "%s(%s): sample_point = %d\n",
+ __func__, rx ? "RX" : "TX", sample_point);
rtsx_pci_init_cmd(pcr);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL, CHANGE_CLK, CHANGE_CLK);
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPRX_CTL, 0x1F, sample_point);
+ if (rx)
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+ SD_VPRX_CTL, 0x1F, sample_point);
+ else
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD,
+ SD_VPTX_CTL, 0x1F, sample_point);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL, PHASE_NOT_RESET, 0);
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL,
PHASE_NOT_RESET, PHASE_NOT_RESET);
@@ -602,7 +607,7 @@
int err;
u8 cmd[5] = {0};
- err = sd_change_phase(host, sample_point);
+ err = sd_change_phase(host, sample_point, true);
if (err < 0)
return err;
@@ -664,7 +669,7 @@
if (final_phase == 0xFF)
return -EINVAL;
- err = sd_change_phase(host, final_phase);
+ err = sd_change_phase(host, final_phase, true);
if (err < 0)
return err;
} else {
@@ -833,14 +838,11 @@
return err;
}
-static int sd_set_timing(struct realtek_pci_sdmmc *host,
- unsigned char timing, bool *ddr_mode)
+static int sd_set_timing(struct realtek_pci_sdmmc *host, unsigned char timing)
{
struct rtsx_pcr *pcr = host->pcr;
int err = 0;
- *ddr_mode = false;
-
rtsx_pci_init_cmd(pcr);
switch (timing) {
@@ -857,8 +859,6 @@
break;
case MMC_TIMING_UHS_DDR50:
- *ddr_mode = true;
-
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_CFG1,
0x0C | SD_ASYNC_FIFO_NOT_RST,
SD_DDR_MODE | SD_ASYNC_FIFO_NOT_RST);
@@ -926,7 +926,7 @@
sd_set_bus_width(host, ios->bus_width);
sd_set_power_mode(host, ios->power_mode);
- sd_set_timing(host, ios->timing, &host->ddr_mode);
+ sd_set_timing(host, ios->timing);
host->vpclk = false;
host->double_clk = true;
@@ -1148,9 +1148,35 @@
rtsx_pci_start_run(pcr);
- if (!host->ddr_mode)
- err = sd_tuning_rx(host, MMC_SEND_TUNING_BLOCK);
+ /* Set initial TX phase */
+ switch (mmc->ios.timing) {
+ case MMC_TIMING_UHS_SDR104:
+ err = sd_change_phase(host, SDR104_TX_PHASE(pcr), false);
+ break;
+ case MMC_TIMING_UHS_SDR50:
+ err = sd_change_phase(host, SDR50_TX_PHASE(pcr), false);
+ break;
+
+ case MMC_TIMING_UHS_DDR50:
+ err = sd_change_phase(host, DDR50_TX_PHASE(pcr), false);
+ break;
+
+ default:
+ err = 0;
+ }
+
+ if (err)
+ goto out;
+
+ /* Tuning RX phase */
+ if ((mmc->ios.timing == MMC_TIMING_UHS_SDR104) ||
+ (mmc->ios.timing == MMC_TIMING_UHS_SDR50))
+ err = sd_tuning_rx(host, opcode);
+ else if (mmc->ios.timing == MMC_TIMING_UHS_DDR50)
+ err = sd_change_phase(host, DDR50_RX_PHASE(pcr), true);
+
+out:
mutex_unlock(&pcr->pcr_mutex);
return err;
