Merge tag 'timers-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timekeeping, timers and related drivers:
Core code:
- Cure a couple of correctness issues in the posix CPU timer code to
prevent that the tick dependency for NOHZ full is kept alive for no
reason.
- Avoid expensive double reprogramming of the clockevent device in
hrtimer_start_range_ns().
- Avoid pointless SMP function calls when the clock was set to avoid
disturbing CPUs which do not have any affected timers queued.
- Make the clocksource watchdog test work correctly when CONFIG_HZ is
less than 100.
Drivers:
- Prefer the ARM architected timer over the Exynos timer which is way
more expensive to access.
- Add device tree bindings for new Ingenic SoCs
- The usual improvements and cleanups all over the place"
* tag 'timers-core-2021-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits)
clocksource: Make clocksource watchdog test safe for slow-HZ systems
dt-bindings: timer: Add ABIs for new Ingenic SoCs
clocksource/drivers/fttmr010: Pass around less pointers
clocksource/drivers/mediatek: Optimize systimer irq clear flow on shutdown
clocksource/drivers/ingenic: Use bitfield macro helpers
clocksource/drivers/sh_cmt: Fix wrong setting if don't request IRQ for clock source channel
dt-bindings: timer: convert rockchip,rk-timer.txt to YAML
clocksource/drivers/exynos_mct: Mark MCT device as CLOCK_EVT_FEAT_PERCPU
clocksource/drivers/exynos_mct: Prioritise Arm arch timer on arm64
hrtimer: Unbreak hrtimer_force_reprogram()
hrtimer: Use raw_cpu_ptr() in clock_was_set()
hrtimer: Avoid more SMP function calls in clock_was_set()
hrtimer: Avoid unnecessary SMP function calls in clock_was_set()
hrtimer: Add bases argument to clock_was_set()
time/timekeeping: Avoid invoking clock_was_set() twice
timekeeping: Distangle resume and clock-was-set events
timerfd: Provide timerfd_resume()
hrtimer: Force clock_was_set() handling for the HIGHRES=n, NOHZ=y case
hrtimer: Ensure timerfd notification for HIGHRES=n
hrtimer: Consolidate reprogramming code
...
diff --git a/Documentation/devicetree/bindings/timer/rockchip,rk-timer.txt b/Documentation/devicetree/bindings/timer/rockchip,rk-timer.txt
deleted file mode 100644
index d65fdce..0000000
--- a/Documentation/devicetree/bindings/timer/rockchip,rk-timer.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-Rockchip rk timer
-
-Required properties:
-- compatible: should be:
- "rockchip,rv1108-timer", "rockchip,rk3288-timer": for Rockchip RV1108
- "rockchip,rk3036-timer", "rockchip,rk3288-timer": for Rockchip RK3036
- "rockchip,rk3066-timer", "rockchip,rk3288-timer": for Rockchip RK3066
- "rockchip,rk3188-timer", "rockchip,rk3288-timer": for Rockchip RK3188
- "rockchip,rk3228-timer", "rockchip,rk3288-timer": for Rockchip RK3228
- "rockchip,rk3229-timer", "rockchip,rk3288-timer": for Rockchip RK3229
- "rockchip,rk3288-timer": for Rockchip RK3288
- "rockchip,rk3368-timer", "rockchip,rk3288-timer": for Rockchip RK3368
- "rockchip,rk3399-timer": for Rockchip RK3399
-- reg: base address of the timer register starting with TIMERS CONTROL register
-- interrupts: should contain the interrupts for Timer0
-- clocks : must contain an entry for each entry in clock-names
-- clock-names : must include the following entries:
- "timer", "pclk"
-
-Example:
- timer: timer@ff810000 {
- compatible = "rockchip,rk3288-timer";
- reg = <0xff810000 0x20>;
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&xin24m>, <&cru PCLK_TIMER>;
- clock-names = "timer", "pclk";
- };
diff --git a/Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml b/Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml
new file mode 100644
index 0000000..e26ecb5
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/rockchip,rk-timer.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/rockchip,rk-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip Timer Device Tree Bindings
+
+maintainers:
+ - Daniel Lezcano <daniel.lezcano@linaro.org>
+
+properties:
+ compatible:
+ oneOf:
+ - const: rockchip,rk3288-timer
+ - const: rockchip,rk3399-timer
+ - items:
+ - enum:
+ - rockchip,rv1108-timer
+ - rockchip,rk3036-timer
+ - rockchip,rk3066-timer
+ - rockchip,rk3188-timer
+ - rockchip,rk3228-timer
+ - rockchip,rk3229-timer
+ - rockchip,rk3288-timer
+ - rockchip,rk3368-timer
+ - rockchip,px30-timer
+ - const: rockchip,rk3288-timer
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: timer
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/rk3288-cru.h>
+
+ timer: timer@ff810000 {
+ compatible = "rockchip,rk3288-timer";
+ reg = <0xff810000 0x20>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_TIMER>, <&xin24m>;
+ clock-names = "pclk", "timer";
+ };
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index fabad79..5e3e96d 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -51,6 +51,15 @@
#define TICK_BASE_CNT 1
+#ifdef CONFIG_ARM
+/* Use values higher than ARM arch timer. See 6282edb72bed. */
+#define MCT_CLKSOURCE_RATING 450
+#define MCT_CLKEVENTS_RATING 500
+#else
+#define MCT_CLKSOURCE_RATING 350
+#define MCT_CLKEVENTS_RATING 350
+#endif
+
enum {
MCT_INT_SPI,
MCT_INT_PPI
@@ -206,7 +215,7 @@ static void exynos4_frc_resume(struct clocksource *cs)
static struct clocksource mct_frc = {
.name = "mct-frc",
- .rating = 450, /* use value higher than ARM arch timer */
+ .rating = MCT_CLKSOURCE_RATING,
.read = exynos4_frc_read,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
@@ -456,8 +465,9 @@ static int exynos4_mct_starting_cpu(unsigned int cpu)
evt->set_state_oneshot = set_state_shutdown;
evt->set_state_oneshot_stopped = set_state_shutdown;
evt->tick_resume = set_state_shutdown;
- evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
- evt->rating = 500; /* use value higher than ARM arch timer */
+ evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_PERCPU;
+ evt->rating = MCT_CLKEVENTS_RATING,
exynos4_mct_write(TICK_BASE_CNT, mevt->base + MCT_L_TCNTB_OFFSET);
diff --git a/drivers/clocksource/ingenic-sysost.c b/drivers/clocksource/ingenic-sysost.c
index a129840..cb6fc2f 100644
--- a/drivers/clocksource/ingenic-sysost.c
+++ b/drivers/clocksource/ingenic-sysost.c
@@ -4,6 +4,7 @@
* Copyright (c) 2020 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
*/
+#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
@@ -34,8 +35,6 @@
/* bits within the OSTCCR register */
#define OSTCCR_PRESCALE1_MASK 0x3
#define OSTCCR_PRESCALE2_MASK 0xc
-#define OSTCCR_PRESCALE1_LSB 0
-#define OSTCCR_PRESCALE2_LSB 2
/* bits within the OSTCR register */
#define OSTCR_OST1CLR BIT(0)
@@ -98,7 +97,7 @@ static unsigned long ingenic_ost_percpu_timer_recalc_rate(struct clk_hw *hw,
prescale = readl(ost_clk->ost->base + info->ostccr_reg);
- prescale = (prescale & OSTCCR_PRESCALE1_MASK) >> OSTCCR_PRESCALE1_LSB;
+ prescale = FIELD_GET(OSTCCR_PRESCALE1_MASK, prescale);
return parent_rate >> (prescale * 2);
}
@@ -112,7 +111,7 @@ static unsigned long ingenic_ost_global_timer_recalc_rate(struct clk_hw *hw,
prescale = readl(ost_clk->ost->base + info->ostccr_reg);
- prescale = (prescale & OSTCCR_PRESCALE2_MASK) >> OSTCCR_PRESCALE2_LSB;
+ prescale = FIELD_GET(OSTCCR_PRESCALE2_MASK, prescale);
return parent_rate >> (prescale * 2);
}
@@ -151,7 +150,8 @@ static int ingenic_ost_percpu_timer_set_rate(struct clk_hw *hw, unsigned long re
int val;
val = readl(ost_clk->ost->base + info->ostccr_reg);
- val = (val & ~OSTCCR_PRESCALE1_MASK) | (prescale << OSTCCR_PRESCALE1_LSB);
+ val &= ~OSTCCR_PRESCALE1_MASK;
+ val |= FIELD_PREP(OSTCCR_PRESCALE1_MASK, prescale);
writel(val, ost_clk->ost->base + info->ostccr_reg);
return 0;
@@ -166,7 +166,8 @@ static int ingenic_ost_global_timer_set_rate(struct clk_hw *hw, unsigned long re
int val;
val = readl(ost_clk->ost->base + info->ostccr_reg);
- val = (val & ~OSTCCR_PRESCALE2_MASK) | (prescale << OSTCCR_PRESCALE2_LSB);
+ val &= ~OSTCCR_PRESCALE2_MASK;
+ val |= FIELD_PREP(OSTCCR_PRESCALE2_MASK, prescale);
writel(val, ost_clk->ost->base + info->ostccr_reg);
return 0;
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index d7ed99f..dd0956a 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -579,7 +579,8 @@ static int sh_cmt_start(struct sh_cmt_channel *ch, unsigned long flag)
ch->flags |= flag;
/* setup timeout if no clockevent */
- if ((flag == FLAG_CLOCKSOURCE) && (!(ch->flags & FLAG_CLOCKEVENT)))
+ if (ch->cmt->num_channels == 1 &&
+ flag == FLAG_CLOCKSOURCE && (!(ch->flags & FLAG_CLOCKEVENT)))
__sh_cmt_set_next(ch, ch->max_match_value);
out:
raw_spin_unlock_irqrestore(&ch->lock, flags);
@@ -621,20 +622,25 @@ static struct sh_cmt_channel *cs_to_sh_cmt(struct clocksource *cs)
static u64 sh_cmt_clocksource_read(struct clocksource *cs)
{
struct sh_cmt_channel *ch = cs_to_sh_cmt(cs);
- unsigned long flags;
u32 has_wrapped;
- u64 value;
- u32 raw;
- raw_spin_lock_irqsave(&ch->lock, flags);
- value = ch->total_cycles;
- raw = sh_cmt_get_counter(ch, &has_wrapped);
+ if (ch->cmt->num_channels == 1) {
+ unsigned long flags;
+ u64 value;
+ u32 raw;
- if (unlikely(has_wrapped))
- raw += ch->match_value + 1;
- raw_spin_unlock_irqrestore(&ch->lock, flags);
+ raw_spin_lock_irqsave(&ch->lock, flags);
+ value = ch->total_cycles;
+ raw = sh_cmt_get_counter(ch, &has_wrapped);
- return value + raw;
+ if (unlikely(has_wrapped))
+ raw += ch->match_value + 1;
+ raw_spin_unlock_irqrestore(&ch->lock, flags);
+
+ return value + raw;
+ }
+
+ return sh_cmt_get_counter(ch, &has_wrapped);
}
static int sh_cmt_clocksource_enable(struct clocksource *cs)
@@ -697,7 +703,7 @@ static int sh_cmt_register_clocksource(struct sh_cmt_channel *ch,
cs->disable = sh_cmt_clocksource_disable;
cs->suspend = sh_cmt_clocksource_suspend;
cs->resume = sh_cmt_clocksource_resume;
- cs->mask = CLOCKSOURCE_MASK(sizeof(u64) * 8);
+ cs->mask = CLOCKSOURCE_MASK(ch->cmt->info->width);
cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;
dev_info(&ch->cmt->pdev->dev, "ch%u: used as clock source\n",
diff --git a/drivers/clocksource/timer-fttmr010.c b/drivers/clocksource/timer-fttmr010.c
index edb1d5f..126fb1f 100644
--- a/drivers/clocksource/timer-fttmr010.c
+++ b/drivers/clocksource/timer-fttmr010.c
@@ -271,9 +271,7 @@ static irqreturn_t ast2600_timer_interrupt(int irq, void *dev_id)
}
static int __init fttmr010_common_init(struct device_node *np,
- bool is_aspeed,
- int (*timer_shutdown)(struct clock_event_device *),
- irq_handler_t irq_handler)
+ bool is_aspeed, bool is_ast2600)
{
struct fttmr010 *fttmr010;
int irq;
@@ -374,8 +372,6 @@ static int __init fttmr010_common_init(struct device_node *np,
fttmr010->tick_rate);
}
- fttmr010->timer_shutdown = timer_shutdown;
-
/*
* Setup clockevent timer (interrupt-driven) on timer 1.
*/
@@ -383,8 +379,18 @@ static int __init fttmr010_common_init(struct device_node *np,
writel(0, fttmr010->base + TIMER1_LOAD);
writel(0, fttmr010->base + TIMER1_MATCH1);
writel(0, fttmr010->base + TIMER1_MATCH2);
- ret = request_irq(irq, irq_handler, IRQF_TIMER,
- "FTTMR010-TIMER1", &fttmr010->clkevt);
+
+ if (is_ast2600) {
+ fttmr010->timer_shutdown = ast2600_timer_shutdown;
+ ret = request_irq(irq, ast2600_timer_interrupt,
+ IRQF_TIMER, "FTTMR010-TIMER1",
+ &fttmr010->clkevt);
+ } else {
+ fttmr010->timer_shutdown = fttmr010_timer_shutdown;
+ ret = request_irq(irq, fttmr010_timer_interrupt,
+ IRQF_TIMER, "FTTMR010-TIMER1",
+ &fttmr010->clkevt);
+ }
if (ret) {
pr_err("FTTMR010-TIMER1 no IRQ\n");
goto out_unmap;
@@ -432,23 +438,17 @@ static int __init fttmr010_common_init(struct device_node *np,
static __init int ast2600_timer_init(struct device_node *np)
{
- return fttmr010_common_init(np, true,
- ast2600_timer_shutdown,
- ast2600_timer_interrupt);
+ return fttmr010_common_init(np, true, true);
}
static __init int aspeed_timer_init(struct device_node *np)
{
- return fttmr010_common_init(np, true,
- fttmr010_timer_shutdown,
- fttmr010_timer_interrupt);
+ return fttmr010_common_init(np, true, false);
}
static __init int fttmr010_timer_init(struct device_node *np)
{
- return fttmr010_common_init(np, false,
- fttmr010_timer_shutdown,
- fttmr010_timer_interrupt);
+ return fttmr010_common_init(np, false, false);
}
TIMER_OF_DECLARE(fttmr010, "faraday,fttmr010", fttmr010_timer_init);
diff --git a/drivers/clocksource/timer-mediatek.c b/drivers/clocksource/timer-mediatek.c
index ab63b95..7bcb4a3 100644
--- a/drivers/clocksource/timer-mediatek.c
+++ b/drivers/clocksource/timer-mediatek.c
@@ -60,9 +60,9 @@
* SYST_CON_EN: Clock enable. Shall be set to
* - Start timer countdown.
* - Allow timeout ticks being updated.
- * - Allow changing interrupt functions.
+ * - Allow changing interrupt status,like clear irq pending.
*
- * SYST_CON_IRQ_EN: Set to allow interrupt.
+ * SYST_CON_IRQ_EN: Set to enable interrupt.
*
* SYST_CON_IRQ_CLR: Set to clear interrupt.
*/
@@ -75,6 +75,7 @@ static void __iomem *gpt_sched_reg __read_mostly;
static void mtk_syst_ack_irq(struct timer_of *to)
{
/* Clear and disable interrupt */
+ writel(SYST_CON_EN, SYST_CON_REG(to));
writel(SYST_CON_IRQ_CLR | SYST_CON_EN, SYST_CON_REG(to));
}
@@ -111,6 +112,9 @@ static int mtk_syst_clkevt_next_event(unsigned long ticks,
static int mtk_syst_clkevt_shutdown(struct clock_event_device *clkevt)
{
+ /* Clear any irq */
+ mtk_syst_ack_irq(to_timer_of(clkevt));
+
/* Disable timer */
writel(0, SYST_CON_REG(to_timer_of(clkevt)));
diff --git a/fs/timerfd.c b/fs/timerfd.c
index c5509d2..e9c96a0 100644
--- a/fs/timerfd.c
+++ b/fs/timerfd.c
@@ -115,6 +115,22 @@ void timerfd_clock_was_set(void)
rcu_read_unlock();
}
+static void timerfd_resume_work(struct work_struct *work)
+{
+ timerfd_clock_was_set();
+}
+
+static DECLARE_WORK(timerfd_work, timerfd_resume_work);
+
+/*
+ * Invoked from timekeeping_resume(). Defer the actual update to work so
+ * timerfd_clock_was_set() runs in task context.
+ */
+void timerfd_resume(void)
+{
+ schedule_work(&timerfd_work);
+}
+
static void __timerfd_remove_cancel(struct timerfd_ctx *ctx)
{
if (ctx->might_cancel) {
diff --git a/include/dt-bindings/clock/ingenic,sysost.h b/include/dt-bindings/clock/ingenic,sysost.h
index 063791b..d7aa42c 100644
--- a/include/dt-bindings/clock/ingenic,sysost.h
+++ b/include/dt-bindings/clock/ingenic,sysost.h
@@ -13,4 +13,23 @@
#define OST_CLK_PERCPU_TIMER2 3
#define OST_CLK_PERCPU_TIMER3 4
+#define OST_CLK_EVENT_TIMER 1
+
+#define OST_CLK_EVENT_TIMER0 0
+#define OST_CLK_EVENT_TIMER1 1
+#define OST_CLK_EVENT_TIMER2 2
+#define OST_CLK_EVENT_TIMER3 3
+#define OST_CLK_EVENT_TIMER4 4
+#define OST_CLK_EVENT_TIMER5 5
+#define OST_CLK_EVENT_TIMER6 6
+#define OST_CLK_EVENT_TIMER7 7
+#define OST_CLK_EVENT_TIMER8 8
+#define OST_CLK_EVENT_TIMER9 9
+#define OST_CLK_EVENT_TIMER10 10
+#define OST_CLK_EVENT_TIMER11 11
+#define OST_CLK_EVENT_TIMER12 12
+#define OST_CLK_EVENT_TIMER13 13
+#define OST_CLK_EVENT_TIMER14 14
+#define OST_CLK_EVENT_TIMER15 15
+
#endif /* __DT_BINDINGS_CLOCK_INGENIC_OST_H__ */
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index bb5e7b0..0ee1401 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -318,16 +318,12 @@ struct clock_event_device;
extern void hrtimer_interrupt(struct clock_event_device *dev);
-extern void clock_was_set_delayed(void);
-
extern unsigned int hrtimer_resolution;
#else
#define hrtimer_resolution (unsigned int)LOW_RES_NSEC
-static inline void clock_was_set_delayed(void) { }
-
#endif
static inline ktime_t
@@ -351,13 +347,13 @@ hrtimer_expires_remaining_adjusted(const struct hrtimer *timer)
timer->base->get_time());
}
-extern void clock_was_set(void);
#ifdef CONFIG_TIMERFD
extern void timerfd_clock_was_set(void);
+extern void timerfd_resume(void);
#else
static inline void timerfd_clock_was_set(void) { }
+static inline void timerfd_resume(void) { }
#endif
-extern void hrtimers_resume(void);
DECLARE_PER_CPU(struct tick_device, tick_cpu_device);
diff --git a/include/linux/posix-timers.h b/include/linux/posix-timers.h
index 896c16d..00fef00 100644
--- a/include/linux/posix-timers.h
+++ b/include/linux/posix-timers.h
@@ -82,12 +82,19 @@ static inline bool cpu_timer_enqueue(struct timerqueue_head *head,
return timerqueue_add(head, &ctmr->node);
}
-static inline void cpu_timer_dequeue(struct cpu_timer *ctmr)
+static inline bool cpu_timer_queued(struct cpu_timer *ctmr)
{
- if (ctmr->head) {
+ return !!ctmr->head;
+}
+
+static inline bool cpu_timer_dequeue(struct cpu_timer *ctmr)
+{
+ if (cpu_timer_queued(ctmr)) {
timerqueue_del(ctmr->head, &ctmr->node);
ctmr->head = NULL;
+ return true;
}
+ return false;
}
static inline u64 cpu_timer_getexpires(struct cpu_timer *ctmr)
diff --git a/include/linux/sched/signal.h b/include/linux/sched/signal.h
index b9126fe..0310a5a 100644
--- a/include/linux/sched/signal.h
+++ b/include/linux/sched/signal.h
@@ -714,6 +714,12 @@ static inline void unlock_task_sighand(struct task_struct *task,
spin_unlock_irqrestore(&task->sighand->siglock, *flags);
}
+#ifdef CONFIG_LOCKDEP
+extern void lockdep_assert_task_sighand_held(struct task_struct *task);
+#else
+static inline void lockdep_assert_task_sighand_held(struct task_struct *task) { }
+#endif
+
static inline unsigned long task_rlimit(const struct task_struct *task,
unsigned int limit)
{
diff --git a/kernel/signal.c b/kernel/signal.c
index a3229ad..52b6abe 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1413,6 +1413,21 @@ struct sighand_struct *__lock_task_sighand(struct task_struct *tsk,
return sighand;
}
+#ifdef CONFIG_LOCKDEP
+void lockdep_assert_task_sighand_held(struct task_struct *task)
+{
+ struct sighand_struct *sighand;
+
+ rcu_read_lock();
+ sighand = rcu_dereference(task->sighand);
+ if (sighand)
+ lockdep_assert_held(&sighand->siglock);
+ else
+ WARN_ON_ONCE(1);
+ rcu_read_unlock();
+}
+#endif
+
/*
* send signal info to all the members of a group
*/
diff --git a/kernel/time/clocksource-wdtest.c b/kernel/time/clocksource-wdtest.c
index 01df123..df922f4 100644
--- a/kernel/time/clocksource-wdtest.c
+++ b/kernel/time/clocksource-wdtest.c
@@ -19,6 +19,8 @@
#include <linux/prandom.h>
#include <linux/cpu.h>
+#include "tick-internal.h"
+
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Paul E. McKenney <paulmck@kernel.org>");
@@ -34,9 +36,6 @@ static u64 wdtest_jiffies_read(struct clocksource *cs)
return (u64)jiffies;
}
-/* Assume HZ > 100. */
-#define JIFFIES_SHIFT 8
-
static struct clocksource clocksource_wdtest_jiffies = {
.name = "wdtest-jiffies",
.rating = 1, /* lowest valid rating*/
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index b89c76e..b8a14d2 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -306,12 +306,12 @@ void clocksource_verify_percpu(struct clocksource *cs)
return;
cpumask_clear(&cpus_ahead);
cpumask_clear(&cpus_behind);
- get_online_cpus();
+ cpus_read_lock();
preempt_disable();
clocksource_verify_choose_cpus();
if (cpumask_weight(&cpus_chosen) == 0) {
preempt_enable();
- put_online_cpus();
+ cpus_read_unlock();
pr_warn("Not enough CPUs to check clocksource '%s'.\n", cs->name);
return;
}
@@ -337,7 +337,7 @@ void clocksource_verify_percpu(struct clocksource *cs)
cs_nsec_min = cs_nsec;
}
preempt_enable();
- put_online_cpus();
+ cpus_read_unlock();
if (!cpumask_empty(&cpus_ahead))
pr_warn(" CPUs %*pbl ahead of CPU %d for clocksource %s.\n",
cpumask_pr_args(&cpus_ahead), testcpu, cs->name);
diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c
index 4a66725..0ea8702 100644
--- a/kernel/time/hrtimer.c
+++ b/kernel/time/hrtimer.c
@@ -652,21 +652,10 @@ static inline int hrtimer_hres_active(void)
return __hrtimer_hres_active(this_cpu_ptr(&hrtimer_bases));
}
-/*
- * Reprogram the event source with checking both queues for the
- * next event
- * Called with interrupts disabled and base->lock held
- */
-static void
-hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base, int skip_equal)
+static void __hrtimer_reprogram(struct hrtimer_cpu_base *cpu_base,
+ struct hrtimer *next_timer,
+ ktime_t expires_next)
{
- ktime_t expires_next;
-
- expires_next = hrtimer_update_next_event(cpu_base);
-
- if (skip_equal && expires_next == cpu_base->expires_next)
- return;
-
cpu_base->expires_next = expires_next;
/*
@@ -689,7 +678,25 @@ hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base, int skip_equal)
if (!__hrtimer_hres_active(cpu_base) || cpu_base->hang_detected)
return;
- tick_program_event(cpu_base->expires_next, 1);
+ tick_program_event(expires_next, 1);
+}
+
+/*
+ * Reprogram the event source with checking both queues for the
+ * next event
+ * Called with interrupts disabled and base->lock held
+ */
+static void
+hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base, int skip_equal)
+{
+ ktime_t expires_next;
+
+ expires_next = hrtimer_update_next_event(cpu_base);
+
+ if (skip_equal && expires_next == cpu_base->expires_next)
+ return;
+
+ __hrtimer_reprogram(cpu_base, cpu_base->next_timer, expires_next);
}
/* High resolution timer related functions */
@@ -720,23 +727,7 @@ static inline int hrtimer_is_hres_enabled(void)
return hrtimer_hres_enabled;
}
-/*
- * Retrigger next event is called after clock was set
- *
- * Called with interrupts disabled via on_each_cpu()
- */
-static void retrigger_next_event(void *arg)
-{
- struct hrtimer_cpu_base *base = this_cpu_ptr(&hrtimer_bases);
-
- if (!__hrtimer_hres_active(base))
- return;
-
- raw_spin_lock(&base->lock);
- hrtimer_update_base(base);
- hrtimer_force_reprogram(base, 0);
- raw_spin_unlock(&base->lock);
-}
+static void retrigger_next_event(void *arg);
/*
* Switch to high resolution mode
@@ -758,29 +749,54 @@ static void hrtimer_switch_to_hres(void)
retrigger_next_event(NULL);
}
-static void clock_was_set_work(struct work_struct *work)
-{
- clock_was_set();
-}
-
-static DECLARE_WORK(hrtimer_work, clock_was_set_work);
-
-/*
- * Called from timekeeping and resume code to reprogram the hrtimer
- * interrupt device on all cpus.
- */
-void clock_was_set_delayed(void)
-{
- schedule_work(&hrtimer_work);
-}
-
#else
static inline int hrtimer_is_hres_enabled(void) { return 0; }
static inline void hrtimer_switch_to_hres(void) { }
-static inline void retrigger_next_event(void *arg) { }
#endif /* CONFIG_HIGH_RES_TIMERS */
+/*
+ * Retrigger next event is called after clock was set with interrupts
+ * disabled through an SMP function call or directly from low level
+ * resume code.
+ *
+ * This is only invoked when:
+ * - CONFIG_HIGH_RES_TIMERS is enabled.
+ * - CONFIG_NOHZ_COMMON is enabled
+ *
+ * For the other cases this function is empty and because the call sites
+ * are optimized out it vanishes as well, i.e. no need for lots of
+ * #ifdeffery.
+ */
+static void retrigger_next_event(void *arg)
+{
+ struct hrtimer_cpu_base *base = this_cpu_ptr(&hrtimer_bases);
+
+ /*
+ * When high resolution mode or nohz is active, then the offsets of
+ * CLOCK_REALTIME/TAI/BOOTTIME have to be updated. Otherwise the
+ * next tick will take care of that.
+ *
+ * If high resolution mode is active then the next expiring timer
+ * must be reevaluated and the clock event device reprogrammed if
+ * necessary.
+ *
+ * In the NOHZ case the update of the offset and the reevaluation
+ * of the next expiring timer is enough. The return from the SMP
+ * function call will take care of the reprogramming in case the
+ * CPU was in a NOHZ idle sleep.
+ */
+ if (!__hrtimer_hres_active(base) && !tick_nohz_active)
+ return;
+
+ raw_spin_lock(&base->lock);
+ hrtimer_update_base(base);
+ if (__hrtimer_hres_active(base))
+ hrtimer_force_reprogram(base, 0);
+ else
+ hrtimer_update_next_event(base);
+ raw_spin_unlock(&base->lock);
+}
/*
* When a timer is enqueued and expires earlier than the already enqueued
@@ -835,75 +851,161 @@ static void hrtimer_reprogram(struct hrtimer *timer, bool reprogram)
if (base->cpu_base != cpu_base)
return;
+ if (expires >= cpu_base->expires_next)
+ return;
+
/*
- * If the hrtimer interrupt is running, then it will
- * reevaluate the clock bases and reprogram the clock event
- * device. The callbacks are always executed in hard interrupt
- * context so we don't need an extra check for a running
- * callback.
+ * If the hrtimer interrupt is running, then it will reevaluate the
+ * clock bases and reprogram the clock event device.
*/
if (cpu_base->in_hrtirq)
return;
- if (expires >= cpu_base->expires_next)
- return;
-
- /* Update the pointer to the next expiring timer */
cpu_base->next_timer = timer;
- cpu_base->expires_next = expires;
+
+ __hrtimer_reprogram(cpu_base, timer, expires);
+}
+
+static bool update_needs_ipi(struct hrtimer_cpu_base *cpu_base,
+ unsigned int active)
+{
+ struct hrtimer_clock_base *base;
+ unsigned int seq;
+ ktime_t expires;
/*
- * If hres is not active, hardware does not have to be
- * programmed yet.
+ * Update the base offsets unconditionally so the following
+ * checks whether the SMP function call is required works.
*
- * If a hang was detected in the last timer interrupt then we
- * do not schedule a timer which is earlier than the expiry
- * which we enforced in the hang detection. We want the system
- * to make progress.
+ * The update is safe even when the remote CPU is in the hrtimer
+ * interrupt or the hrtimer soft interrupt and expiring affected
+ * bases. Either it will see the update before handling a base or
+ * it will see it when it finishes the processing and reevaluates
+ * the next expiring timer.
*/
- if (!__hrtimer_hres_active(cpu_base) || cpu_base->hang_detected)
- return;
+ seq = cpu_base->clock_was_set_seq;
+ hrtimer_update_base(cpu_base);
/*
- * Program the timer hardware. We enforce the expiry for
- * events which are already in the past.
+ * If the sequence did not change over the update then the
+ * remote CPU already handled it.
*/
- tick_program_event(expires, 1);
+ if (seq == cpu_base->clock_was_set_seq)
+ return false;
+
+ /*
+ * If the remote CPU is currently handling an hrtimer interrupt, it
+ * will reevaluate the first expiring timer of all clock bases
+ * before reprogramming. Nothing to do here.
+ */
+ if (cpu_base->in_hrtirq)
+ return false;
+
+ /*
+ * Walk the affected clock bases and check whether the first expiring
+ * timer in a clock base is moving ahead of the first expiring timer of
+ * @cpu_base. If so, the IPI must be invoked because per CPU clock
+ * event devices cannot be remotely reprogrammed.
+ */
+ active &= cpu_base->active_bases;
+
+ for_each_active_base(base, cpu_base, active) {
+ struct timerqueue_node *next;
+
+ next = timerqueue_getnext(&base->active);
+ expires = ktime_sub(next->expires, base->offset);
+ if (expires < cpu_base->expires_next)
+ return true;
+
+ /* Extra check for softirq clock bases */
+ if (base->clockid < HRTIMER_BASE_MONOTONIC_SOFT)
+ continue;
+ if (cpu_base->softirq_activated)
+ continue;
+ if (expires < cpu_base->softirq_expires_next)
+ return true;
+ }
+ return false;
}
/*
- * Clock realtime was set
+ * Clock was set. This might affect CLOCK_REALTIME, CLOCK_TAI and
+ * CLOCK_BOOTTIME (for late sleep time injection).
*
- * Change the offset of the realtime clock vs. the monotonic
- * clock.
- *
- * We might have to reprogram the high resolution timer interrupt. On
- * SMP we call the architecture specific code to retrigger _all_ high
- * resolution timer interrupts. On UP we just disable interrupts and
- * call the high resolution interrupt code.
+ * This requires to update the offsets for these clocks
+ * vs. CLOCK_MONOTONIC. When high resolution timers are enabled, then this
+ * also requires to eventually reprogram the per CPU clock event devices
+ * when the change moves an affected timer ahead of the first expiring
+ * timer on that CPU. Obviously remote per CPU clock event devices cannot
+ * be reprogrammed. The other reason why an IPI has to be sent is when the
+ * system is in !HIGH_RES and NOHZ mode. The NOHZ mode updates the offsets
+ * in the tick, which obviously might be stopped, so this has to bring out
+ * the remote CPU which might sleep in idle to get this sorted.
*/
-void clock_was_set(void)
+void clock_was_set(unsigned int bases)
{
-#ifdef CONFIG_HIGH_RES_TIMERS
- /* Retrigger the CPU local events everywhere */
- on_each_cpu(retrigger_next_event, NULL, 1);
-#endif
+ struct hrtimer_cpu_base *cpu_base = raw_cpu_ptr(&hrtimer_bases);
+ cpumask_var_t mask;
+ int cpu;
+
+ if (!__hrtimer_hres_active(cpu_base) && !tick_nohz_active)
+ goto out_timerfd;
+
+ if (!zalloc_cpumask_var(&mask, GFP_KERNEL)) {
+ on_each_cpu(retrigger_next_event, NULL, 1);
+ goto out_timerfd;
+ }
+
+ /* Avoid interrupting CPUs if possible */
+ cpus_read_lock();
+ for_each_online_cpu(cpu) {
+ unsigned long flags;
+
+ cpu_base = &per_cpu(hrtimer_bases, cpu);
+ raw_spin_lock_irqsave(&cpu_base->lock, flags);
+
+ if (update_needs_ipi(cpu_base, bases))
+ cpumask_set_cpu(cpu, mask);
+
+ raw_spin_unlock_irqrestore(&cpu_base->lock, flags);
+ }
+
+ preempt_disable();
+ smp_call_function_many(mask, retrigger_next_event, NULL, 1);
+ preempt_enable();
+ cpus_read_unlock();
+ free_cpumask_var(mask);
+
+out_timerfd:
timerfd_clock_was_set();
}
+static void clock_was_set_work(struct work_struct *work)
+{
+ clock_was_set(CLOCK_SET_WALL);
+}
+
+static DECLARE_WORK(hrtimer_work, clock_was_set_work);
+
/*
- * During resume we might have to reprogram the high resolution timer
- * interrupt on all online CPUs. However, all other CPUs will be
- * stopped with IRQs interrupts disabled so the clock_was_set() call
- * must be deferred.
+ * Called from timekeeping code to reprogram the hrtimer interrupt device
+ * on all cpus and to notify timerfd.
*/
-void hrtimers_resume(void)
+void clock_was_set_delayed(void)
+{
+ schedule_work(&hrtimer_work);
+}
+
+/*
+ * Called during resume either directly from via timekeeping_resume()
+ * or in the case of s2idle from tick_unfreeze() to ensure that the
+ * hrtimers are up to date.
+ */
+void hrtimers_resume_local(void)
{
lockdep_assert_irqs_disabled();
/* Retrigger on the local CPU */
retrigger_next_event(NULL);
- /* And schedule a retrigger for all others */
- clock_was_set_delayed();
}
/*
@@ -1030,12 +1132,13 @@ static void __remove_hrtimer(struct hrtimer *timer,
* remove hrtimer, called with base lock held
*/
static inline int
-remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base, bool restart)
+remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base,
+ bool restart, bool keep_local)
{
u8 state = timer->state;
if (state & HRTIMER_STATE_ENQUEUED) {
- int reprogram;
+ bool reprogram;
/*
* Remove the timer and force reprogramming when high
@@ -1048,8 +1151,16 @@ remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base, bool rest
debug_deactivate(timer);
reprogram = base->cpu_base == this_cpu_ptr(&hrtimer_bases);
+ /*
+ * If the timer is not restarted then reprogramming is
+ * required if the timer is local. If it is local and about
+ * to be restarted, avoid programming it twice (on removal
+ * and a moment later when it's requeued).
+ */
if (!restart)
state = HRTIMER_STATE_INACTIVE;
+ else
+ reprogram &= !keep_local;
__remove_hrtimer(timer, base, state, reprogram);
return 1;
@@ -1103,9 +1214,31 @@ static int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
struct hrtimer_clock_base *base)
{
struct hrtimer_clock_base *new_base;
+ bool force_local, first;
- /* Remove an active timer from the queue: */
- remove_hrtimer(timer, base, true);
+ /*
+ * If the timer is on the local cpu base and is the first expiring
+ * timer then this might end up reprogramming the hardware twice
+ * (on removal and on enqueue). To avoid that by prevent the
+ * reprogram on removal, keep the timer local to the current CPU
+ * and enforce reprogramming after it is queued no matter whether
+ * it is the new first expiring timer again or not.
+ */
+ force_local = base->cpu_base == this_cpu_ptr(&hrtimer_bases);
+ force_local &= base->cpu_base->next_timer == timer;
+
+ /*
+ * Remove an active timer from the queue. In case it is not queued
+ * on the current CPU, make sure that remove_hrtimer() updates the
+ * remote data correctly.
+ *
+ * If it's on the current CPU and the first expiring timer, then
+ * skip reprogramming, keep the timer local and enforce
+ * reprogramming later if it was the first expiring timer. This
+ * avoids programming the underlying clock event twice (once at
+ * removal and once after enqueue).
+ */
+ remove_hrtimer(timer, base, true, force_local);
if (mode & HRTIMER_MODE_REL)
tim = ktime_add_safe(tim, base->get_time());
@@ -1115,9 +1248,24 @@ static int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
hrtimer_set_expires_range_ns(timer, tim, delta_ns);
/* Switch the timer base, if necessary: */
- new_base = switch_hrtimer_base(timer, base, mode & HRTIMER_MODE_PINNED);
+ if (!force_local) {
+ new_base = switch_hrtimer_base(timer, base,
+ mode & HRTIMER_MODE_PINNED);
+ } else {
+ new_base = base;
+ }
- return enqueue_hrtimer(timer, new_base, mode);
+ first = enqueue_hrtimer(timer, new_base, mode);
+ if (!force_local)
+ return first;
+
+ /*
+ * Timer was forced to stay on the current CPU to avoid
+ * reprogramming on removal and enqueue. Force reprogram the
+ * hardware by evaluating the new first expiring timer.
+ */
+ hrtimer_force_reprogram(new_base->cpu_base, 1);
+ return 0;
}
/**
@@ -1183,7 +1331,7 @@ int hrtimer_try_to_cancel(struct hrtimer *timer)
base = lock_hrtimer_base(timer, &flags);
if (!hrtimer_callback_running(timer))
- ret = remove_hrtimer(timer, base, false);
+ ret = remove_hrtimer(timer, base, false, false);
unlock_hrtimer_base(timer, &flags);
diff --git a/kernel/time/jiffies.c b/kernel/time/jiffies.c
index 01935aa..bc4db9e 100644
--- a/kernel/time/jiffies.c
+++ b/kernel/time/jiffies.c
@@ -10,28 +10,9 @@
#include <linux/init.h>
#include "timekeeping.h"
+#include "tick-internal.h"
-/* Since jiffies uses a simple TICK_NSEC multiplier
- * conversion, the .shift value could be zero. However
- * this would make NTP adjustments impossible as they are
- * in units of 1/2^.shift. Thus we use JIFFIES_SHIFT to
- * shift both the nominator and denominator the same
- * amount, and give ntp adjustments in units of 1/2^8
- *
- * The value 8 is somewhat carefully chosen, as anything
- * larger can result in overflows. TICK_NSEC grows as HZ
- * shrinks, so values greater than 8 overflow 32bits when
- * HZ=100.
- */
-#if HZ < 34
-#define JIFFIES_SHIFT 6
-#elif HZ < 67
-#define JIFFIES_SHIFT 7
-#else
-#define JIFFIES_SHIFT 8
-#endif
-
static u64 jiffies_read(struct clocksource *cs)
{
return (u64) jiffies;
diff --git a/kernel/time/posix-cpu-timers.c b/kernel/time/posix-cpu-timers.c
index 517be7f..ee73686 100644
--- a/kernel/time/posix-cpu-timers.c
+++ b/kernel/time/posix-cpu-timers.c
@@ -291,6 +291,8 @@ static void thread_group_start_cputime(struct task_struct *tsk, u64 *samples)
struct thread_group_cputimer *cputimer = &tsk->signal->cputimer;
struct posix_cputimers *pct = &tsk->signal->posix_cputimers;
+ lockdep_assert_task_sighand_held(tsk);
+
/* Check if cputimer isn't running. This is accessed without locking. */
if (!READ_ONCE(pct->timers_active)) {
struct task_cputime sum;
@@ -405,6 +407,55 @@ static int posix_cpu_timer_create(struct k_itimer *new_timer)
return 0;
}
+static struct posix_cputimer_base *timer_base(struct k_itimer *timer,
+ struct task_struct *tsk)
+{
+ int clkidx = CPUCLOCK_WHICH(timer->it_clock);
+
+ if (CPUCLOCK_PERTHREAD(timer->it_clock))
+ return tsk->posix_cputimers.bases + clkidx;
+ else
+ return tsk->signal->posix_cputimers.bases + clkidx;
+}
+
+/*
+ * Force recalculating the base earliest expiration on the next tick.
+ * This will also re-evaluate the need to keep around the process wide
+ * cputime counter and tick dependency and eventually shut these down
+ * if necessary.
+ */
+static void trigger_base_recalc_expires(struct k_itimer *timer,
+ struct task_struct *tsk)
+{
+ struct posix_cputimer_base *base = timer_base(timer, tsk);
+
+ base->nextevt = 0;
+}
+
+/*
+ * Dequeue the timer and reset the base if it was its earliest expiration.
+ * It makes sure the next tick recalculates the base next expiration so we
+ * don't keep the costly process wide cputime counter around for a random
+ * amount of time, along with the tick dependency.
+ *
+ * If another timer gets queued between this and the next tick, its
+ * expiration will update the base next event if necessary on the next
+ * tick.
+ */
+static void disarm_timer(struct k_itimer *timer, struct task_struct *p)
+{
+ struct cpu_timer *ctmr = &timer->it.cpu;
+ struct posix_cputimer_base *base;
+
+ if (!cpu_timer_dequeue(ctmr))
+ return;
+
+ base = timer_base(timer, p);
+ if (cpu_timer_getexpires(ctmr) == base->nextevt)
+ trigger_base_recalc_expires(timer, p);
+}
+
+
/*
* Clean up a CPU-clock timer that is about to be destroyed.
* This is called from timer deletion with the timer already locked.
@@ -439,7 +490,7 @@ static int posix_cpu_timer_del(struct k_itimer *timer)
if (timer->it.cpu.firing)
ret = TIMER_RETRY;
else
- cpu_timer_dequeue(ctmr);
+ disarm_timer(timer, p);
unlock_task_sighand(p, &flags);
}
@@ -498,15 +549,9 @@ void posix_cpu_timers_exit_group(struct task_struct *tsk)
*/
static void arm_timer(struct k_itimer *timer, struct task_struct *p)
{
- int clkidx = CPUCLOCK_WHICH(timer->it_clock);
+ struct posix_cputimer_base *base = timer_base(timer, p);
struct cpu_timer *ctmr = &timer->it.cpu;
u64 newexp = cpu_timer_getexpires(ctmr);
- struct posix_cputimer_base *base;
-
- if (CPUCLOCK_PERTHREAD(timer->it_clock))
- base = p->posix_cputimers.bases + clkidx;
- else
- base = p->signal->posix_cputimers.bases + clkidx;
if (!cpu_timer_enqueue(&base->tqhead, ctmr))
return;
@@ -703,16 +748,29 @@ static int posix_cpu_timer_set(struct k_itimer *timer, int timer_flags,
timer->it_overrun_last = 0;
timer->it_overrun = -1;
- if (new_expires != 0 && !(val < new_expires)) {
- /*
- * The designated time already passed, so we notify
- * immediately, even if the thread never runs to
- * accumulate more time on this clock.
- */
- cpu_timer_fire(timer);
- }
+ if (val >= new_expires) {
+ if (new_expires != 0) {
+ /*
+ * The designated time already passed, so we notify
+ * immediately, even if the thread never runs to
+ * accumulate more time on this clock.
+ */
+ cpu_timer_fire(timer);
+ }
- ret = 0;
+ /*
+ * Make sure we don't keep around the process wide cputime
+ * counter or the tick dependency if they are not necessary.
+ */
+ sighand = lock_task_sighand(p, &flags);
+ if (!sighand)
+ goto out;
+
+ if (!cpu_timer_queued(ctmr))
+ trigger_base_recalc_expires(timer, p);
+
+ unlock_task_sighand(p, &flags);
+ }
out:
rcu_read_unlock();
if (old)
@@ -1346,8 +1404,6 @@ void set_process_cpu_timer(struct task_struct *tsk, unsigned int clkid,
}
}
- if (!*newval)
- return;
*newval += now;
}
diff --git a/kernel/time/posix-timers.c b/kernel/time/posix-timers.c
index dd5697d..3913222 100644
--- a/kernel/time/posix-timers.c
+++ b/kernel/time/posix-timers.c
@@ -336,7 +336,7 @@ void posixtimer_rearm(struct kernel_siginfo *info)
int posix_timer_event(struct k_itimer *timr, int si_private)
{
enum pid_type type;
- int ret = -1;
+ int ret;
/*
* FIXME: if ->sigq is queued we can race with
* dequeue_signal()->posixtimer_rearm().
diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c
index d663249..4678935 100644
--- a/kernel/time/tick-common.c
+++ b/kernel/time/tick-common.c
@@ -470,6 +470,13 @@ void tick_resume_local(void)
else
tick_resume_oneshot();
}
+
+ /*
+ * Ensure that hrtimers are up to date and the clockevents device
+ * is reprogrammed correctly when high resolution timers are
+ * enabled.
+ */
+ hrtimers_resume_local();
}
/**
diff --git a/kernel/time/tick-internal.h b/kernel/time/tick-internal.h
index 6a742a2..649f2b4 100644
--- a/kernel/time/tick-internal.h
+++ b/kernel/time/tick-internal.h
@@ -165,3 +165,35 @@ DECLARE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases);
extern u64 get_next_timer_interrupt(unsigned long basej, u64 basem);
void timer_clear_idle(void);
+
+#define CLOCK_SET_WALL \
+ (BIT(HRTIMER_BASE_REALTIME) | BIT(HRTIMER_BASE_REALTIME_SOFT) | \
+ BIT(HRTIMER_BASE_TAI) | BIT(HRTIMER_BASE_TAI_SOFT))
+
+#define CLOCK_SET_BOOT \
+ (BIT(HRTIMER_BASE_BOOTTIME) | BIT(HRTIMER_BASE_BOOTTIME_SOFT))
+
+void clock_was_set(unsigned int bases);
+void clock_was_set_delayed(void);
+
+void hrtimers_resume_local(void);
+
+/* Since jiffies uses a simple TICK_NSEC multiplier
+ * conversion, the .shift value could be zero. However
+ * this would make NTP adjustments impossible as they are
+ * in units of 1/2^.shift. Thus we use JIFFIES_SHIFT to
+ * shift both the nominator and denominator the same
+ * amount, and give ntp adjustments in units of 1/2^8
+ *
+ * The value 8 is somewhat carefully chosen, as anything
+ * larger can result in overflows. TICK_NSEC grows as HZ
+ * shrinks, so values greater than 8 overflow 32bits when
+ * HZ=100.
+ */
+#if HZ < 34
+#define JIFFIES_SHIFT 6
+#elif HZ < 67
+#define JIFFIES_SHIFT 7
+#else
+#define JIFFIES_SHIFT 8
+#endif
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 8a364aa..b348749 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -1323,8 +1323,8 @@ int do_settimeofday64(const struct timespec64 *ts)
write_seqcount_end(&tk_core.seq);
raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
- /* signal hrtimers about time change */
- clock_was_set();
+ /* Signal hrtimers about time change */
+ clock_was_set(CLOCK_SET_WALL);
if (!ret)
audit_tk_injoffset(ts_delta);
@@ -1371,8 +1371,8 @@ static int timekeeping_inject_offset(const struct timespec64 *ts)
write_seqcount_end(&tk_core.seq);
raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
- /* signal hrtimers about time change */
- clock_was_set();
+ /* Signal hrtimers about time change */
+ clock_was_set(CLOCK_SET_WALL);
return ret;
}
@@ -1746,8 +1746,8 @@ void timekeeping_inject_sleeptime64(const struct timespec64 *delta)
write_seqcount_end(&tk_core.seq);
raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
- /* signal hrtimers about time change */
- clock_was_set();
+ /* Signal hrtimers about time change */
+ clock_was_set(CLOCK_SET_WALL | CLOCK_SET_BOOT);
}
#endif
@@ -1810,8 +1810,10 @@ void timekeeping_resume(void)
touch_softlockup_watchdog();
+ /* Resume the clockevent device(s) and hrtimers */
tick_resume();
- hrtimers_resume();
+ /* Notify timerfd as resume is equivalent to clock_was_set() */
+ timerfd_resume();
}
int timekeeping_suspend(void)
@@ -2125,7 +2127,7 @@ static u64 logarithmic_accumulation(struct timekeeper *tk, u64 offset,
* timekeeping_advance - Updates the timekeeper to the current time and
* current NTP tick length
*/
-static void timekeeping_advance(enum timekeeping_adv_mode mode)
+static bool timekeeping_advance(enum timekeeping_adv_mode mode)
{
struct timekeeper *real_tk = &tk_core.timekeeper;
struct timekeeper *tk = &shadow_timekeeper;
@@ -2196,9 +2198,8 @@ static void timekeeping_advance(enum timekeeping_adv_mode mode)
write_seqcount_end(&tk_core.seq);
out:
raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
- if (clock_set)
- /* Have to call _delayed version, since in irq context*/
- clock_was_set_delayed();
+
+ return !!clock_set;
}
/**
@@ -2207,7 +2208,8 @@ static void timekeeping_advance(enum timekeeping_adv_mode mode)
*/
void update_wall_time(void)
{
- timekeeping_advance(TK_ADV_TICK);
+ if (timekeeping_advance(TK_ADV_TICK))
+ clock_was_set_delayed();
}
/**
@@ -2387,8 +2389,9 @@ int do_adjtimex(struct __kernel_timex *txc)
{
struct timekeeper *tk = &tk_core.timekeeper;
struct audit_ntp_data ad;
- unsigned long flags;
+ bool clock_set = false;
struct timespec64 ts;
+ unsigned long flags;
s32 orig_tai, tai;
int ret;
@@ -2423,6 +2426,7 @@ int do_adjtimex(struct __kernel_timex *txc)
if (tai != orig_tai) {
__timekeeping_set_tai_offset(tk, tai);
timekeeping_update(tk, TK_MIRROR | TK_CLOCK_WAS_SET);
+ clock_set = true;
}
tk_update_leap_state(tk);
@@ -2433,10 +2437,10 @@ int do_adjtimex(struct __kernel_timex *txc)
/* Update the multiplier immediately if frequency was set directly */
if (txc->modes & (ADJ_FREQUENCY | ADJ_TICK))
- timekeeping_advance(TK_ADV_FREQ);
+ clock_set |= timekeeping_advance(TK_ADV_FREQ);
- if (tai != orig_tai)
- clock_was_set();
+ if (clock_set)
+ clock_was_set(CLOCK_REALTIME);
ntp_notify_cmos_timer();
