[media] v4l: Switch from V4L2 OF not V4L2 fwnode API
Switch users of the v4l2_of_ APIs to the more generic v4l2_fwnode_ APIs.
Async OF matching is replaced by fwnode matching and OF matching support
is removed.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Benoit Parrot <bparrot@ti.com> # i2c/ov2569.c, am437x/am437x-vpfe.c and ti-vpe/cal.c
Tested-by: Hans Verkuil <hans.verkuil@cisco.com> # Atmel sama5d3 board + ov2640 sensor
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index fd181c9..7c23b7a 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -209,6 +209,7 @@
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
depends on GPIOLIB || COMPILE_TEST
select HDMI
+ select V4L2_FWNODE
---help---
Support for the Analog Devices ADV7604 video decoder.
@@ -322,6 +323,7 @@
tristate "Toshiba TC358743 decoder"
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
select HDMI
+ select V4L2_FWNODE
---help---
Support for the Toshiba TC358743 HDMI to MIPI CSI-2 bridge.
@@ -331,6 +333,7 @@
config VIDEO_TVP514X
tristate "Texas Instruments TVP514x video decoder"
depends on VIDEO_V4L2 && I2C
+ select V4L2_FWNODE
---help---
This is a Video4Linux2 sensor-level driver for the TI TVP5146/47
decoder. It is currently working with the TI OMAP3 camera
@@ -342,6 +345,7 @@
config VIDEO_TVP5150
tristate "Texas Instruments TVP5150 video decoder"
depends on VIDEO_V4L2 && I2C
+ select V4L2_FWNODE
---help---
Support for the Texas Instruments TVP5150 video decoder.
@@ -351,6 +355,7 @@
config VIDEO_TVP7002
tristate "Texas Instruments TVP7002 video decoder"
depends on VIDEO_V4L2 && I2C
+ select V4L2_FWNODE
---help---
Support for the Texas Instruments TVP7002 video decoder.
@@ -532,6 +537,7 @@
tristate "OmniVision OV2659 sensor support"
depends on VIDEO_V4L2 && I2C
depends on MEDIA_CAMERA_SUPPORT
+ select V4L2_FWNODE
---help---
This is a Video4Linux2 sensor-level driver for the OmniVision
OV2659 camera.
@@ -544,6 +550,7 @@
depends on OF
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on MEDIA_CAMERA_SUPPORT
+ select V4L2_FWNODE
---help---
This is a Video4Linux2 sensor-level driver for the OmniVision
OV5645 camera.
@@ -555,6 +562,7 @@
tristate "OmniVision OV5647 sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on MEDIA_CAMERA_SUPPORT
+ select V4L2_FWNODE
---help---
This is a Video4Linux2 sensor-level driver for the OmniVision
OV5647 camera.
@@ -647,6 +655,7 @@
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on MEDIA_CAMERA_SUPPORT
select REGMAP_I2C
+ select V4L2_FWNODE
---help---
This is a Video4Linux2 sensor-level driver for the Micron
MT9V032 752x480 CMOS sensor.
@@ -694,6 +703,7 @@
config VIDEO_S5K5BAF
tristate "Samsung S5K5BAF sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
---help---
This is a V4L2 sensor-level driver for Samsung S5K5BAF 2M
camera sensor with an embedded SoC image signal processor.
@@ -704,6 +714,7 @@
config VIDEO_S5C73M3
tristate "Samsung S5C73M3 sensor support"
depends on I2C && SPI && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ select V4L2_FWNODE
---help---
This is a V4L2 sensor-level driver for Samsung S5C73M3
8 Mpixel camera.
