diff --git a/Documentation/ABI/testing/configfs-usb-gadget-sourcesink b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink
index bc7ff73..f56335a 100644
--- a/Documentation/ABI/testing/configfs-usb-gadget-sourcesink
+++ b/Documentation/ABI/testing/configfs-usb-gadget-sourcesink
@@ -10,3 +10,5 @@
 		isoc_mult	- 0..2 (hs/ss only)
 		isoc_maxburst	- 0..15 (ss only)
 		buflen		- buffer length
+		bulk_qlen	- depth of queue for bulk
+		iso_qlen	- depth of queue for iso
diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index fd132cb..2213682 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -4,6 +4,7 @@
 Required properties:
 - compatible : One of:
   - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC.
+  - hisilicon,hi6220-usb: The DWC2 USB controller instance in the hi6220 SoC.
   - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc;
   - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc;
   - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
diff --git a/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt
new file mode 100644
index 0000000..30361b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/dwc3-xilinx.txt
@@ -0,0 +1,33 @@
+Xilinx SuperSpeed DWC3 USB SoC controller
+
+Required properties:
+- compatible:	Should contain "xlnx,zynqmp-dwc3"
+- clocks:	A list of phandles for the clocks listed in clock-names
+- clock-names:	Should contain the following:
+  "bus_clk"	 Master/Core clock, have to be >= 125 MHz for SS
+		 operation and >= 60MHz for HS operation
+
+  "ref_clk"	 Clock source to core during PHY power down
+
+Required child node:
+A child node must exist to represent the core DWC3 IP block. The name of
+the node is not important. The content of the node is defined in dwc3.txt.
+
+Example device node:
+
+		usb@0 {
+			#address-cells = <0x2>;
+			#size-cells = <0x1>;
+			status = "okay";
+			compatible = "xlnx,zynqmp-dwc3";
+			clock-names = "bus_clk" "ref_clk";
+			clocks = <&clk125>, <&clk125>;
+			ranges;
+
+			dwc3@fe200000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xfe200000 0x40000>;
+				interrupts = <0x0 0x41 0x4>;
+				dr_mode = "host";
+			};
+		};
diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
new file mode 100644
index 0000000..8d52766
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/renesas_usb3.txt
@@ -0,0 +1,23 @@
+Renesas Electronics USB3.0 Peripheral driver
+
+Required properties:
+  - compatible: Must contain one of the following:
+	- "renesas,r8a7795-usb3-peri"
+  - reg: Base address and length of the register for the USB3.0 Peripheral
+  - interrupts: Interrupt specifier for the USB3.0 Peripheral
+  - clocks: clock phandle and specifier pair
+
+Example:
+	usb3_peri0: usb@ee020000 {
+		compatible = "renesas,r8a7795-usb3-peri";
+		reg = <0 0xee020000 0 0x400>;
+		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 328>;
+	};
+
+	usb3_peri1: usb@ee060000 {
+		compatible = "renesas,r8a7795-usb3-peri";
+		reg = <0 0xee060000 0 0x400>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cpg CPG_MOD 327>;
+	};
diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
index 7d48f63..b604056 100644
--- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
+++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt
@@ -1,11 +1,21 @@
 Renesas Electronics USBHS driver
 
 Required properties:
-  - compatible: Must contain one of the following:
-	- "renesas,usbhs-r8a7790"
-	- "renesas,usbhs-r8a7791"
-	- "renesas,usbhs-r8a7794"
-	- "renesas,usbhs-r8a7795"
+  - compatible: Must contain one or more of the following:
+
+	- "renesas,usbhs-r8a7790" for r8a7790 (R-Car H2) compatible device
+	- "renesas,usbhs-r8a7791" for r8a7791 (R-Car M2-W) compatible device
+	- "renesas,usbhs-r8a7792" for r8a7792 (R-Car V2H) compatible device
+	- "renesas,usbhs-r8a7793" for r8a7793 (R-Car M2-N) compatible device
+	- "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device
+	- "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device
+	- "renesas,rcar-gen2-usbhs" for R-Car Gen2 compatible device
+	- "renesas,rcar-gen3-usbhs" for R-Car Gen3 compatible device
+
+	When compatible with the generic version, nodes must list the
+	SoC-specific version corresponding to the platform first followed
+	by the generic version.
+
   - reg: Base address and length of the register for the USBHS
   - interrupts: Interrupt specifier for the USBHS
   - clocks: A list of phandle + clock specifier pairs
@@ -22,7 +32,7 @@
 
 Example:
 	usbhs: usb@e6590000 {
-		compatible = "renesas,usbhs-r8a7790";
+		compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs";
 		reg = <0 0xe6590000 0 0x100>;
 		interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
diff --git a/Documentation/usb/gadget-testing.txt b/Documentation/usb/gadget-testing.txt
index b24d3ef..5819605 100644
--- a/Documentation/usb/gadget-testing.txt
+++ b/Documentation/usb/gadget-testing.txt
@@ -434,7 +434,7 @@
 
 where seriald and serialc are Felipe's utilities found here:
 
-https://git.gitorious.org/usb/usb-tools.git master
+https://github.com/felipebalbi/usb-tools.git master
 
 12. PHONET function
 ===================
@@ -579,6 +579,8 @@
 	isoc_mult	- 0..2 (hs/ss only)
 	isoc_maxburst	- 0..15 (ss only)
 	bulk_buflen	- buffer length
+	bulk_qlen	- depth of queue for bulk
+	iso_qlen	- depth of queue for iso
 
 Testing the SOURCESINK function
 -------------------------------
diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
index 3a707dd..4a3fc6e 100644
--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -34,7 +34,7 @@
 #include <linux/usb/otg.h>
 #include <linux/phy/phy.h>
 #include <linux/pm_runtime.h>
-#include <linux/usb/musb-omap.h>
+#include <linux/usb/musb.h>
 #include <linux/usb/ulpi.h>
 #include <linux/i2c/twl.h>
 #include <linux/regulator/consumer.h>
@@ -148,10 +148,10 @@
  * If VBUS is valid or ID is ground, then we know a
  * cable is present and we need to be runtime-enabled
  */
-static inline bool cable_present(enum omap_musb_vbus_id_status stat)
+static inline bool cable_present(enum musb_vbus_id_status stat)
 {
-	return stat == OMAP_MUSB_VBUS_VALID ||
-		stat == OMAP_MUSB_ID_GROUND;
+	return stat == MUSB_VBUS_VALID ||
+		stat == MUSB_ID_GROUND;
 }
 
 struct twl4030_usb {
@@ -170,7 +170,7 @@
 	enum twl4030_usb_mode	usb_mode;
 
 	int			irq;
-	enum omap_musb_vbus_id_status linkstat;
+	enum musb_vbus_id_status linkstat;
 	bool			vbus_supplied;
 
 	struct delayed_work	id_workaround_work;
@@ -276,11 +276,11 @@
 	return (ret & (ULPI_OTG_DRVVBUS | ULPI_OTG_CHRGVBUS)) ? true : false;
 }
 
-static enum omap_musb_vbus_id_status
+static enum musb_vbus_id_status
 	twl4030_usb_linkstat(struct twl4030_usb *twl)
 {
 	int	status;
-	enum omap_musb_vbus_id_status linkstat = OMAP_MUSB_UNKNOWN;
+	enum musb_vbus_id_status linkstat = MUSB_UNKNOWN;
 
 	twl->vbus_supplied = false;
 
@@ -306,14 +306,14 @@
 		}
 
 		if (status & BIT(2))
-			linkstat = OMAP_MUSB_ID_GROUND;
+			linkstat = MUSB_ID_GROUND;
 		else if (status & BIT(7))
-			linkstat = OMAP_MUSB_VBUS_VALID;
+			linkstat = MUSB_VBUS_VALID;
 		else
-			linkstat = OMAP_MUSB_VBUS_OFF;
+			linkstat = MUSB_VBUS_OFF;
 	} else {
-		if (twl->linkstat != OMAP_MUSB_UNKNOWN)
-			linkstat = OMAP_MUSB_VBUS_OFF;
+		if (twl->linkstat != MUSB_UNKNOWN)
+			linkstat = MUSB_VBUS_OFF;
 	}
 
 	dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n",
@@ -535,7 +535,7 @@
 static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
 {
 	struct twl4030_usb *twl = _twl;
-	enum omap_musb_vbus_id_status status;
+	enum musb_vbus_id_status status;
 	bool status_changed = false;
 
 	status = twl4030_usb_linkstat(twl);
@@ -567,11 +567,11 @@
 			pm_runtime_mark_last_busy(twl->dev);
 			pm_runtime_put_autosuspend(twl->dev);
 		}
-		omap_musb_mailbox(status);
+		musb_mailbox(status);
 	}
 
 	/* don't schedule during sleep - irq works right then */
-	if (status == OMAP_MUSB_ID_GROUND && pm_runtime_active(twl->dev)) {
+	if (status == MUSB_ID_GROUND && pm_runtime_active(twl->dev)) {
 		cancel_delayed_work(&twl->id_workaround_work);
 		schedule_delayed_work(&twl->id_workaround_work, HZ);
 	}
@@ -670,7 +670,7 @@
 	twl->dev		= &pdev->dev;
 	twl->irq		= platform_get_irq(pdev, 0);
 	twl->vbus_supplied	= false;
-	twl->linkstat		= OMAP_MUSB_UNKNOWN;
+	twl->linkstat		= MUSB_UNKNOWN;
 
 	twl->phy.dev		= twl->dev;
 	twl->phy.label		= "twl4030";
diff --git a/drivers/usb/common/common.c b/drivers/usb/common/common.c
index 673d530..e6ec125 100644
--- a/drivers/usb/common/common.c
+++ b/drivers/usb/common/common.c
@@ -17,6 +17,7 @@
 #include <linux/usb/ch9.h>
 #include <linux/usb/of.h>
 #include <linux/usb/otg.h>
+#include <linux/of_platform.h>
 
 const char *usb_otg_state_string(enum usb_otg_state state)
 {
@@ -106,25 +107,72 @@
 	[USB_DR_MODE_OTG]		= "otg",
 };
 
+static enum usb_dr_mode usb_get_dr_mode_from_string(const char *str)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
+		if (!strcmp(usb_dr_modes[i], str))
+			return i;
+
+	return USB_DR_MODE_UNKNOWN;
+}
+
 enum usb_dr_mode usb_get_dr_mode(struct device *dev)
 {
 	const char *dr_mode;
-	int err, i;
+	int err;
 
 	err = device_property_read_string(dev, "dr_mode", &dr_mode);
 	if (err < 0)
 		return USB_DR_MODE_UNKNOWN;
 
-	for (i = 0; i < ARRAY_SIZE(usb_dr_modes); i++)
-		if (!strcmp(dr_mode, usb_dr_modes[i]))
-			return i;
-
-	return USB_DR_MODE_UNKNOWN;
+	return usb_get_dr_mode_from_string(dr_mode);
 }
 EXPORT_SYMBOL_GPL(usb_get_dr_mode);
 
 #ifdef CONFIG_OF
 /**
+ * of_usb_get_dr_mode_by_phy - Get dual role mode for the controller device
+ * which is associated with the given phy device_node
+ * @np:	Pointer to the given phy device_node
+ *
+ * In dts a usb controller associates with phy devices.  The function gets
+ * the string from property 'dr_mode' of the controller associated with the
+ * given phy device node, and returns the correspondig enum usb_dr_mode.
+ */
+enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *phy_np)
+{
+	struct device_node *controller = NULL;
+	struct device_node *phy;
+	const char *dr_mode;
+	int index;
+	int err;
+
+	do {
+		controller = of_find_node_with_property(controller, "phys");
+		index = 0;
+		do {
+			phy = of_parse_phandle(controller, "phys", index);
+			of_node_put(phy);
+			if (phy == phy_np)
+				goto finish;
+			index++;
+		} while (phy);
+	} while (controller);
+
+finish:
+	err = of_property_read_string(controller, "dr_mode", &dr_mode);
+	of_node_put(controller);
+
+	if (err < 0)
+		return USB_DR_MODE_UNKNOWN;
+
+	return usb_get_dr_mode_from_string(dr_mode);
+}
+EXPORT_SYMBOL_GPL(of_usb_get_dr_mode_by_phy);
+
+/**
  * of_usb_host_tpl_support - to get if Targeted Peripheral List is supported
  * for given targeted hosts (non-PC hosts)
  * @np: Pointer to the given device_node
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index ef73e49..39a0fa8 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -481,32 +481,19 @@
  * Do core a soft reset of the core.  Be careful with this because it
  * resets all the internal state machines of the core.
  */
-static int dwc2_core_reset(struct dwc2_hsotg *hsotg)
+int dwc2_core_reset(struct dwc2_hsotg *hsotg)
 {
 	u32 greset;
 	int count = 0;
-	u32 gusbcfg;
 
 	dev_vdbg(hsotg->dev, "%s()\n", __func__);
 
-	/* Wait for AHB master IDLE state */
-	do {
-		usleep_range(20000, 40000);
-		greset = dwc2_readl(hsotg->regs + GRSTCTL);
-		if (++count > 50) {
-			dev_warn(hsotg->dev,
-				 "%s() HANG! AHB Idle GRSTCTL=%0x\n",
-				 __func__, greset);
-			return -EBUSY;
-		}
-	} while (!(greset & GRSTCTL_AHBIDLE));
-
 	/* Core Soft Reset */
-	count = 0;
+	greset = dwc2_readl(hsotg->regs + GRSTCTL);
 	greset |= GRSTCTL_CSFTRST;
 	dwc2_writel(greset, hsotg->regs + GRSTCTL);
 	do {
-		usleep_range(20000, 40000);
+		udelay(1);
 		greset = dwc2_readl(hsotg->regs + GRSTCTL);
 		if (++count > 50) {
 			dev_warn(hsotg->dev,
@@ -516,29 +503,146 @@
 		}
 	} while (greset & GRSTCTL_CSFTRST);
 
-	if (hsotg->dr_mode == USB_DR_MODE_HOST) {
-		gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
-		gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
-		gusbcfg |= GUSBCFG_FORCEHOSTMODE;
-		dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
-	} else if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) {
-		gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
-		gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
-		gusbcfg |= GUSBCFG_FORCEDEVMODE;
-		dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
-	} else if (hsotg->dr_mode == USB_DR_MODE_OTG) {
-		gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
-		gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
-		gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
-		dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
-	}
+	/* Wait for AHB master IDLE state */
+	count = 0;
+	do {
+		udelay(1);
+		greset = dwc2_readl(hsotg->regs + GRSTCTL);
+		if (++count > 50) {
+			dev_warn(hsotg->dev,
+				 "%s() HANG! AHB Idle GRSTCTL=%0x\n",
+				 __func__, greset);
+			return -EBUSY;
+		}
+	} while (!(greset & GRSTCTL_AHBIDLE));
+
+	return 0;
+}
+
+/*
+ * Force the mode of the controller.
+ *
+ * Forcing the mode is needed for two cases:
+ *
+ * 1) If the dr_mode is set to either HOST or PERIPHERAL we force the
+ * controller to stay in a particular mode regardless of ID pin
+ * changes. We do this usually after a core reset.
+ *
+ * 2) During probe we want to read reset values of the hw
+ * configuration registers that are only available in either host or
+ * device mode. We may need to force the mode if the current mode does
+ * not allow us to access the register in the mode that we want.
+ *
+ * In either case it only makes sense to force the mode if the
+ * controller hardware is OTG capable.
+ *
+ * Checks are done in this function to determine whether doing a force
+ * would be valid or not.
+ *
+ * If a force is done, it requires a 25ms delay to take effect.
+ *
+ * Returns true if the mode was forced.
+ */
+static bool dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host)
+{
+	u32 gusbcfg;
+	u32 set;
+	u32 clear;
+
+	dev_dbg(hsotg->dev, "Forcing mode to %s\n", host ? "host" : "device");
+
+	/*
+	 * Force mode has no effect if the hardware is not OTG.
+	 */
+	if (!dwc2_hw_is_otg(hsotg))
+		return false;
+
+	/*
+	 * If dr_mode is either peripheral or host only, there is no
+	 * need to ever force the mode to the opposite mode.
+	 */
+	if (WARN_ON(host && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL))
+		return false;
+
+	if (WARN_ON(!host && hsotg->dr_mode == USB_DR_MODE_HOST))
+		return false;
+
+	gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
+
+	set = host ? GUSBCFG_FORCEHOSTMODE : GUSBCFG_FORCEDEVMODE;
+	clear = host ? GUSBCFG_FORCEDEVMODE : GUSBCFG_FORCEHOSTMODE;
+
+	/*
+	 * If the force mode bit is already set, don't set it.
+	 */
+	if ((gusbcfg & set) && !(gusbcfg & clear))
+		return false;
+
+	gusbcfg &= ~clear;
+	gusbcfg |= set;
+	dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
+
+	msleep(25);
+	return true;
+}
+
+/*
+ * Clears the force mode bits.
+ */
+static void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg)
+{
+	u32 gusbcfg;
+
+	gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
+	gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
+	gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
+	dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
 
 	/*
 	 * NOTE: This long sleep is _very_ important, otherwise the core will
 	 * not stay in host mode after a connector ID change!
 	 */
-	usleep_range(150000, 200000);
+	msleep(25);
+}
 
+/*
+ * Sets or clears force mode based on the dr_mode parameter.
+ */
+void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg)
+{
+	switch (hsotg->dr_mode) {
+	case USB_DR_MODE_HOST:
+		dwc2_force_mode(hsotg, true);
+		break;
+	case USB_DR_MODE_PERIPHERAL:
+		dwc2_force_mode(hsotg, false);
+		break;
+	case USB_DR_MODE_OTG:
+		dwc2_clear_force_mode(hsotg);
+		break;
+	default:
+		dev_warn(hsotg->dev, "%s() Invalid dr_mode=%d\n",
+			 __func__, hsotg->dr_mode);
+		break;
+	}
+}
+
+/*
+ * Do core a soft reset of the core.  Be careful with this because it
+ * resets all the internal state machines of the core.
+ *
+ * Additionally this will apply force mode as per the hsotg->dr_mode
+ * parameter.
+ */
+int dwc2_core_reset_and_force_dr_mode(struct dwc2_hsotg *hsotg)
+{
+	int retval;
+
+	retval = dwc2_core_reset(hsotg);
+	if (retval)
+		return retval;
+
+	dwc2_force_dr_mode(hsotg);
 	return 0;
 }
 
@@ -553,16 +657,20 @@
 	 */
 	if (select_phy) {
 		dev_dbg(hsotg->dev, "FS PHY selected\n");
-		usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
-		usbcfg |= GUSBCFG_PHYSEL;
-		dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
 
-		/* Reset after a PHY select */
-		retval = dwc2_core_reset(hsotg);
-		if (retval) {
-			dev_err(hsotg->dev, "%s() Reset failed, aborting",
-					__func__);
-			return retval;
+		usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
+		if (!(usbcfg & GUSBCFG_PHYSEL)) {
+			usbcfg |= GUSBCFG_PHYSEL;
+			dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
+
+			/* Reset after a PHY select */
+			retval = dwc2_core_reset_and_force_dr_mode(hsotg);
+
+			if (retval) {
+				dev_err(hsotg->dev,
+					"%s: Reset failed, aborting", __func__);
+				return retval;
+			}
 		}
 	}
 
@@ -597,13 +705,13 @@
 
 static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
 {
-	u32 usbcfg;
+	u32 usbcfg, usbcfg_old;
 	int retval = 0;
 
 	if (!select_phy)
 		return 0;
 
-	usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
+	usbcfg = usbcfg_old = dwc2_readl(hsotg->regs + GUSBCFG);
 
 	/*
 	 * HS PHY parameters. These parameters are preserved during soft reset
@@ -631,14 +739,16 @@
 		break;
 	}
 
-	dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
+	if (usbcfg != usbcfg_old) {
+		dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
 
-	/* Reset after setting the PHY parameters */
-	retval = dwc2_core_reset(hsotg);
-	if (retval) {
-		dev_err(hsotg->dev, "%s() Reset failed, aborting",
-				__func__);
-		return retval;
+		/* Reset after setting the PHY parameters */
+		retval = dwc2_core_reset_and_force_dr_mode(hsotg);
+		if (retval) {
+			dev_err(hsotg->dev,
+				"%s: Reset failed, aborting", __func__);
+			return retval;
+		}
 	}
 
 	return retval;
@@ -765,11 +875,10 @@
  * dwc2_core_init() - Initializes the DWC_otg controller registers and
  * prepares the core for device mode or host mode operation
  *
- * @hsotg:      Programming view of the DWC_otg controller
- * @select_phy: If true then also set the Phy type
- * @irq:        If >= 0, the irq to register
+ * @hsotg:         Programming view of the DWC_otg controller
+ * @initial_setup: If true then this is the first init for this instance.
  */
-int dwc2_core_init(struct dwc2_hsotg *hsotg, bool select_phy, int irq)
+int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup)
 {
 	u32 usbcfg, otgctl;
 	int retval;
@@ -791,18 +900,26 @@
 
 	dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
 
-	/* Reset the Controller */
-	retval = dwc2_core_reset(hsotg);
-	if (retval) {
-		dev_err(hsotg->dev, "%s(): Reset failed, aborting\n",
-				__func__);
-		return retval;
+	/*
+	 * Reset the Controller
+	 *
+	 * We only need to reset the controller if this is a re-init.
+	 * For the first init we know for sure that earlier code reset us (it
+	 * needed to in order to properly detect various parameters).
+	 */
+	if (!initial_setup) {
+		retval = dwc2_core_reset_and_force_dr_mode(hsotg);
+		if (retval) {
+			dev_err(hsotg->dev, "%s(): Reset failed, aborting\n",
+					__func__);
+			return retval;
+		}
 	}
 
 	/*
 	 * This needs to happen in FS mode before any other programming occurs
 	 */
-	retval = dwc2_phy_init(hsotg, select_phy);
+	retval = dwc2_phy_init(hsotg, initial_setup);
 	if (retval)
 		return retval;
 
@@ -1707,6 +1824,7 @@
 	u32 hcchar;
 	u32 hctsiz = 0;
 	u16 num_packets;
+	u32 ec_mc;
 
 	if (dbg_hc(chan))
 		dev_vdbg(hsotg->dev, "%s()\n", __func__);
@@ -1743,6 +1861,13 @@
 
 		hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT &
 			  TSIZ_XFERSIZE_MASK;
+
+		/* For split set ec_mc for immediate retries */
+		if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
+		    chan->ep_type == USB_ENDPOINT_XFER_ISOC)
+			ec_mc = 3;
+		else
+			ec_mc = 1;
 	} else {
 		if (dbg_hc(chan))
 			dev_vdbg(hsotg->dev, "no split\n");
@@ -1805,6 +1930,9 @@
 
 		hctsiz |= chan->xfer_len << TSIZ_XFERSIZE_SHIFT &
 			  TSIZ_XFERSIZE_MASK;
+
+		/* The ec_mc gets the multi_count for non-split */
+		ec_mc = chan->multi_count;
 	}
 
 	chan->start_pkt_count = num_packets;
@@ -1855,8 +1983,7 @@
 
 	hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
 	hcchar &= ~HCCHAR_MULTICNT_MASK;
-	hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT &
-		  HCCHAR_MULTICNT_MASK;
+	hcchar |= (ec_mc << HCCHAR_MULTICNT_SHIFT) & HCCHAR_MULTICNT_MASK;
 	dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar);
 
 	if (hcchar & HCCHAR_CHDIS)
@@ -1905,7 +2032,6 @@
 				 struct dwc2_host_chan *chan)
 {
 	u32 hcchar;
-	u32 hc_dma;
 	u32 hctsiz = 0;
 
 	if (chan->do_ping)
@@ -1934,14 +2060,14 @@
 
 	dwc2_writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num));
 
-	hc_dma = (u32)chan->desc_list_addr & HCDMA_DMA_ADDR_MASK;
+	dma_sync_single_for_device(hsotg->dev, chan->desc_list_addr,
+				   chan->desc_list_sz, DMA_TO_DEVICE);
 
-	/* Always start from first descriptor */
-	hc_dma &= ~HCDMA_CTD_MASK;
-	dwc2_writel(hc_dma, hsotg->regs + HCDMA(chan->hc_num));
+	dwc2_writel(chan->desc_list_addr, hsotg->regs + HCDMA(chan->hc_num));
+
 	if (dbg_hc(chan))
-		dev_vdbg(hsotg->dev, "Wrote %08x to HCDMA(%d)\n",
-			 hc_dma, chan->hc_num);
+		dev_vdbg(hsotg->dev, "Wrote %pad to HCDMA(%d)\n",
+			 &chan->desc_list_addr, chan->hc_num);
 
 	hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num));
 	hcchar &= ~HCCHAR_MULTICNT_MASK;
@@ -2485,6 +2611,29 @@
 	hsotg->core_params->dma_desc_enable = val;
 }
 
+void dwc2_set_param_dma_desc_fs_enable(struct dwc2_hsotg *hsotg, int val)
+{
+	int valid = 1;
+
+	if (val > 0 && (hsotg->core_params->dma_enable <= 0 ||
+			!hsotg->hw_params.dma_desc_enable))
+		valid = 0;
+	if (val < 0)
+		valid = 0;
+
+	if (!valid) {
+		if (val >= 0)
+			dev_err(hsotg->dev,
+				"%d invalid for dma_desc_fs_enable parameter. Check HW configuration.\n",
+				val);
+		val = (hsotg->core_params->dma_enable > 0 &&
+			hsotg->hw_params.dma_desc_enable);
+	}
+
+	hsotg->core_params->dma_desc_fs_enable = val;
+	dev_dbg(hsotg->dev, "Setting dma_desc_fs_enable to %d\n", val);
+}
+
 void dwc2_set_param_host_support_fs_ls_low_power(struct dwc2_hsotg *hsotg,
 						 int val)
 {
@@ -3016,6 +3165,7 @@
 	dwc2_set_param_otg_cap(hsotg, params->otg_cap);
 	dwc2_set_param_dma_enable(hsotg, params->dma_enable);
 	dwc2_set_param_dma_desc_enable(hsotg, params->dma_desc_enable);
+	dwc2_set_param_dma_desc_fs_enable(hsotg, params->dma_desc_fs_enable);
 	dwc2_set_param_host_support_fs_ls_low_power(hsotg,
 			params->host_support_fs_ls_low_power);
 	dwc2_set_param_enable_dynamic_fifo(hsotg,
@@ -3052,17 +3202,93 @@
 	dwc2_set_param_hibernation(hsotg, params->hibernation);
 }
 
+/*
+ * Forces either host or device mode if the controller is not
+ * currently in that mode.
+ *
+ * Returns true if the mode was forced.
+ */
+static bool dwc2_force_mode_if_needed(struct dwc2_hsotg *hsotg, bool host)
+{
+	if (host && dwc2_is_host_mode(hsotg))
+		return false;
+	else if (!host && dwc2_is_device_mode(hsotg))
+		return false;
+
+	return dwc2_force_mode(hsotg, host);
+}
+
+/*
+ * Gets host hardware parameters. Forces host mode if not currently in
+ * host mode. Should be called immediately after a core soft reset in
+ * order to get the reset values.
+ */
+static void dwc2_get_host_hwparams(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_hw_params *hw = &hsotg->hw_params;
+	u32 gnptxfsiz;
+	u32 hptxfsiz;
+	bool forced;
+
+	if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
+		return;
+
+	forced = dwc2_force_mode_if_needed(hsotg, true);
+
+	gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ);
+	hptxfsiz = dwc2_readl(hsotg->regs + HPTXFSIZ);
+	dev_dbg(hsotg->dev, "gnptxfsiz=%08x\n", gnptxfsiz);
+	dev_dbg(hsotg->dev, "hptxfsiz=%08x\n", hptxfsiz);
+
+	if (forced)
+		dwc2_clear_force_mode(hsotg);
+
+	hw->host_nperio_tx_fifo_size = (gnptxfsiz & FIFOSIZE_DEPTH_MASK) >>
+				       FIFOSIZE_DEPTH_SHIFT;
+	hw->host_perio_tx_fifo_size = (hptxfsiz & FIFOSIZE_DEPTH_MASK) >>
+				      FIFOSIZE_DEPTH_SHIFT;
+}
+
+/*
+ * Gets device hardware parameters. Forces device mode if not
+ * currently in device mode. Should be called immediately after a core
+ * soft reset in order to get the reset values.
+ */
+static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_hw_params *hw = &hsotg->hw_params;
+	bool forced;
+	u32 gnptxfsiz;
+
+	if (hsotg->dr_mode == USB_DR_MODE_HOST)
+		return;
+
+	forced = dwc2_force_mode_if_needed(hsotg, false);
+
+	gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ);
+	dev_dbg(hsotg->dev, "gnptxfsiz=%08x\n", gnptxfsiz);
+
+	if (forced)
+		dwc2_clear_force_mode(hsotg);
+
+	hw->dev_nperio_tx_fifo_size = (gnptxfsiz & FIFOSIZE_DEPTH_MASK) >>
+				       FIFOSIZE_DEPTH_SHIFT;
+}
+
 /**
  * During device initialization, read various hardware configuration
  * registers and interpret the contents.
+ *
+ * This should be called during driver probe. It will perform a core
+ * soft reset in order to get the reset values of the parameters.
  */
 int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
 {
 	struct dwc2_hw_params *hw = &hsotg->hw_params;
 	unsigned width;
 	u32 hwcfg1, hwcfg2, hwcfg3, hwcfg4;
-	u32 hptxfsiz, grxfsiz, gnptxfsiz;
-	u32 gusbcfg;
+	u32 grxfsiz;
+	int retval;
 
 	/*
 	 * Attempt to ensure this device is really a DWC_otg Controller.
@@ -3082,6 +3308,10 @@
 		hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,
 		hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);
 
+	retval = dwc2_core_reset(hsotg);
+	if (retval)
+		return retval;
+
 	hwcfg1 = dwc2_readl(hsotg->regs + GHWCFG1);
 	hwcfg2 = dwc2_readl(hsotg->regs + GHWCFG2);
 	hwcfg3 = dwc2_readl(hsotg->regs + GHWCFG3);
@@ -3094,20 +3324,16 @@
 	dev_dbg(hsotg->dev, "hwcfg4=%08x\n", hwcfg4);
 	dev_dbg(hsotg->dev, "grxfsiz=%08x\n", grxfsiz);
 
-	/* Force host mode to get HPTXFSIZ / GNPTXFSIZ exact power on value */
-	gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
-	gusbcfg |= GUSBCFG_FORCEHOSTMODE;
-	dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
-	usleep_range(100000, 150000);
+	/*
+	 * Host specific hardware parameters. Reading these parameters
+	 * requires the controller to be in host mode. The mode will
+	 * be forced, if necessary, to read these values.
+	 */
+	dwc2_get_host_hwparams(hsotg);
+	dwc2_get_dev_hwparams(hsotg);
 
-	gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ);
-	hptxfsiz = dwc2_readl(hsotg->regs + HPTXFSIZ);
-	dev_dbg(hsotg->dev, "gnptxfsiz=%08x\n", gnptxfsiz);
-	dev_dbg(hsotg->dev, "hptxfsiz=%08x\n", hptxfsiz);
-	gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
-	gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
-	dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
-	usleep_range(100000, 150000);
+	/* hwcfg1 */
+	hw->dev_ep_dirs = hwcfg1;
 
 	/* hwcfg2 */
 	hw->op_mode = (hwcfg2 & GHWCFG2_OP_MODE_MASK) >>
@@ -3163,10 +3389,6 @@
 	/* fifo sizes */
 	hw->host_rx_fifo_size = (grxfsiz & GRXFSIZ_DEPTH_MASK) >>
 				GRXFSIZ_DEPTH_SHIFT;
-	hw->host_nperio_tx_fifo_size = (gnptxfsiz & FIFOSIZE_DEPTH_MASK) >>
-				       FIFOSIZE_DEPTH_SHIFT;
-	hw->host_perio_tx_fifo_size = (hptxfsiz & FIFOSIZE_DEPTH_MASK) >>
-				      FIFOSIZE_DEPTH_SHIFT;
 
 	dev_dbg(hsotg->dev, "Detected values from hardware:\n");
 	dev_dbg(hsotg->dev, "  op_mode=%d\n",
@@ -3275,6 +3497,43 @@
 	dwc2_writel(ahbcfg, hsotg->regs + GAHBCFG);
 }
 
+/* Returns the controller's GHWCFG2.OTG_MODE. */
+unsigned dwc2_op_mode(struct dwc2_hsotg *hsotg)
+{
+	u32 ghwcfg2 = dwc2_readl(hsotg->regs + GHWCFG2);
+
+	return (ghwcfg2 & GHWCFG2_OP_MODE_MASK) >>
+		GHWCFG2_OP_MODE_SHIFT;
+}
+
+/* Returns true if the controller is capable of DRD. */
+bool dwc2_hw_is_otg(struct dwc2_hsotg *hsotg)
+{
+	unsigned op_mode = dwc2_op_mode(hsotg);
+
+	return (op_mode == GHWCFG2_OP_MODE_HNP_SRP_CAPABLE) ||
+		(op_mode == GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE) ||
+		(op_mode == GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE);
+}
+
+/* Returns true if the controller is host-only. */
+bool dwc2_hw_is_host(struct dwc2_hsotg *hsotg)
+{
+	unsigned op_mode = dwc2_op_mode(hsotg);
+
+	return (op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_HOST) ||
+		(op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST);
+}
+
+/* Returns true if the controller is device-only. */
+bool dwc2_hw_is_device(struct dwc2_hsotg *hsotg)
+{
+	unsigned op_mode = dwc2_op_mode(hsotg);
+
+	return (op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
+		(op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE);
+}
+
 MODULE_DESCRIPTION("DESIGNWARE HS OTG Core");
 MODULE_AUTHOR("Synopsys, Inc.");
 MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index a66d3cb..7fb6434 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -246,6 +246,13 @@
  *                      value for this if none is specified.
  *                       0 - Address DMA
  *                       1 - Descriptor DMA (default, if available)
+ * @dma_desc_fs_enable: When DMA mode is enabled, specifies whether to use
+ *                      address DMA mode or descriptor DMA mode for accessing
+ *                      the data FIFOs in Full Speed mode only. The driver
+ *                      will automatically detect the value for this if none is
+ *                      specified.
+ *                       0 - Address DMA
+ *                       1 - Descriptor DMA in FS (default, if available)
  * @speed:              Specifies the maximum speed of operation in host and
  *                      device mode. The actual speed depends on the speed of
  *                      the attached device and the value of phy_type.
@@ -375,6 +382,7 @@
 	int otg_ver;
 	int dma_enable;
 	int dma_desc_enable;
+	int dma_desc_fs_enable;
 	int speed;
 	int enable_dynamic_fifo;
 	int en_multiple_tx_fifo;
@@ -451,15 +459,18 @@
  *                       1 - 16 bits
  *                       2 - 8 or 16 bits
  * @snpsid:             Value from SNPSID register
+ * @dev_ep_dirs:        Direction of device endpoints (GHWCFG1)
  */
 struct dwc2_hw_params {
 	unsigned op_mode:3;
 	unsigned arch:2;
 	unsigned dma_desc_enable:1;
+	unsigned dma_desc_fs_enable:1;
 	unsigned enable_dynamic_fifo:1;
 	unsigned en_multiple_tx_fifo:1;
 	unsigned host_rx_fifo_size:16;
 	unsigned host_nperio_tx_fifo_size:16;
+	unsigned dev_nperio_tx_fifo_size:16;
 	unsigned host_perio_tx_fifo_size:16;
 	unsigned nperio_tx_q_depth:3;
 	unsigned host_perio_tx_q_depth:3;
@@ -476,6 +487,7 @@
 	unsigned power_optimized:1;
 	unsigned utmi_phy_data_width:2;
 	u32 snpsid;
+	u32 dev_ep_dirs;
 };
 
 /* Size of control and EP0 buffers */
@@ -676,6 +688,9 @@
  * @otg_port:           OTG port number
  * @frame_list:         Frame list
  * @frame_list_dma:     Frame list DMA address
+ * @frame_list_sz:      Frame list size
+ * @desc_gen_cache:     Kmem cache for generic descriptors
+ * @desc_hsisoc_cache:  Kmem cache for hs isochronous descriptors
  *
  * These are for peripheral mode:
  *
@@ -770,6 +785,7 @@
 	u16 frame_number;
 	u16 periodic_qh_count;
 	bool bus_suspended;
+	bool new_connection;
 
 #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
 #define FRAME_NUM_ARRAY_SIZE 1000
@@ -794,6 +810,9 @@
 	u8 otg_port;
 	u32 *frame_list;
 	dma_addr_t frame_list_dma;
+	u32 frame_list_sz;
+	struct kmem_cache *desc_gen_cache;
+	struct kmem_cache *desc_hsisoc_cache;
 
 #ifdef DEBUG
 	u32 frrem_samples;
@@ -864,10 +883,14 @@
  * The following functions support initialization of the core driver component
  * and the DWC_otg controller
  */
+extern int dwc2_core_reset(struct dwc2_hsotg *hsotg);
+extern int dwc2_core_reset_and_force_dr_mode(struct dwc2_hsotg *hsotg);
 extern void dwc2_core_host_init(struct dwc2_hsotg *hsotg);
 extern int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg);
 extern int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, bool restore);
 
+void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg);
+
 /*
  * Host core Functions.
  * The following functions support managing the DWC_otg controller in host
@@ -901,7 +924,7 @@
 extern void dwc2_flush_tx_fifo(struct dwc2_hsotg *hsotg, const int num);
 extern void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg);
 
-extern int dwc2_core_init(struct dwc2_hsotg *hsotg, bool select_phy, int irq);
+extern int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup);
 extern void dwc2_enable_global_interrupts(struct dwc2_hsotg *hcd);
 extern void dwc2_disable_global_interrupts(struct dwc2_hsotg *hcd);
 
@@ -942,6 +965,16 @@
 extern void dwc2_set_param_dma_desc_enable(struct dwc2_hsotg *hsotg, int val);
 
 /*
+ * When DMA mode is enabled specifies whether to use
+ * address DMA or DMA Descritor mode with full speed devices
+ * for accessing the data FIFOs in host mode.
+ * 0 - address DMA
+ * 1 - FS DMA Descriptor(default, if available)
+ */
+extern void dwc2_set_param_dma_desc_fs_enable(struct dwc2_hsotg *hsotg,
+					      int val);
+
+/*
  * Specifies the maximum speed of operation in host and device mode.
  * The actual speed depends on the speed of the attached device and
  * the value of phy_type. The actual speed depends on the speed of the
@@ -1110,6 +1143,31 @@
 extern int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg);
 
 /*
+ * The following functions check the controller's OTG operation mode
+ * capability (GHWCFG2.OTG_MODE).
+ *
+ * These functions can be used before the internal hsotg->hw_params
+ * are read in and cached so they always read directly from the
+ * GHWCFG2 register.
+ */
+unsigned dwc2_op_mode(struct dwc2_hsotg *hsotg);
+bool dwc2_hw_is_otg(struct dwc2_hsotg *hsotg);
+bool dwc2_hw_is_host(struct dwc2_hsotg *hsotg);
+bool dwc2_hw_is_device(struct dwc2_hsotg *hsotg);
+
+/*
+ * Returns the mode of operation, host or device
+ */
+static inline int dwc2_is_host_mode(struct dwc2_hsotg *hsotg)
+{
+	return (dwc2_readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) != 0;
+}
+static inline int dwc2_is_device_mode(struct dwc2_hsotg *hsotg)
+{
+	return (dwc2_readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) == 0;
+}
+
+/*
  * Dump core registers and SPRAM
  */
 extern void dwc2_dump_dev_registers(struct dwc2_hsotg *hsotg);
@@ -1154,12 +1212,14 @@
 
 #if IS_ENABLED(CONFIG_USB_DWC2_HOST) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
 extern int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg);
-extern void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg);
+extern void dwc2_hcd_connect(struct dwc2_hsotg *hsotg);
+extern void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force);
 extern void dwc2_hcd_start(struct dwc2_hsotg *hsotg);
 #else
 static inline int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg)
 { return 0; }
-static inline void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg) {}
+static inline void dwc2_hcd_connect(struct dwc2_hsotg *hsotg) {}
+static inline void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force) {}
 static inline void dwc2_hcd_start(struct dwc2_hsotg *hsotg) {}
 static inline void dwc2_hcd_remove(struct dwc2_hsotg *hsotg) {}
 static inline int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq)
diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
index 27daa42..d85c5c9 100644
--- a/drivers/usb/dwc2/core_intr.c
+++ b/drivers/usb/dwc2/core_intr.c
@@ -86,9 +86,6 @@
 		hprt0 &= ~HPRT0_ENA;
 		dwc2_writel(hprt0, hsotg->regs + HPRT0);
 	}
-
-	/* Clear interrupt */
-	dwc2_writel(GINTSTS_PRTINT, hsotg->regs + GINTSTS);
 }
 
 /**
@@ -98,11 +95,11 @@
  */
 static void dwc2_handle_mode_mismatch_intr(struct dwc2_hsotg *hsotg)
 {
-	dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n",
-		 dwc2_is_host_mode(hsotg) ? "Host" : "Device");
-
 	/* Clear interrupt */
 	dwc2_writel(GINTSTS_MODEMIS, hsotg->regs + GINTSTS);
+
+	dev_warn(hsotg->dev, "Mode Mismatch Interrupt: currently in %s mode\n",
+		 dwc2_is_host_mode(hsotg) ? "Host" : "Device");
 }
 
 /**
@@ -239,7 +236,7 @@
 			dev_dbg(hsotg->dev, "a_suspend->a_peripheral (%d)\n",
 				hsotg->op_state);
 			spin_unlock(&hsotg->lock);
-			dwc2_hcd_disconnect(hsotg);
+			dwc2_hcd_disconnect(hsotg, false);
 			spin_lock(&hsotg->lock);
 			hsotg->op_state = OTG_STATE_A_PERIPHERAL;
 		} else {
@@ -276,9 +273,13 @@
  */
 static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg)
 {
-	u32 gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
+	u32 gintmsk;
+
+	/* Clear interrupt */
+	dwc2_writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS);
 
 	/* Need to disable SOF interrupt immediately */
+	gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
 	gintmsk &= ~GINTSTS_SOF;
 	dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
 
@@ -295,9 +296,6 @@
 		queue_work(hsotg->wq_otg, &hsotg->wf_otg);
 		spin_lock(&hsotg->lock);
 	}
-
-	/* Clear interrupt */
-	dwc2_writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS);
 }
 
 /**
@@ -315,12 +313,12 @@
 {
 	int ret;
 
-	dev_dbg(hsotg->dev, "Session request interrupt - lx_state=%d\n",
-							hsotg->lx_state);
-
 	/* Clear interrupt */
 	dwc2_writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS);
 
+	dev_dbg(hsotg->dev, "Session request interrupt - lx_state=%d\n",
+							hsotg->lx_state);
+
 	if (dwc2_is_device_mode(hsotg)) {
 		if (hsotg->lx_state == DWC2_L2) {
 			ret = dwc2_exit_hibernation(hsotg, true);
@@ -347,6 +345,10 @@
 static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
 {
 	int ret;
+
+	/* Clear interrupt */
+	dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS);
+
 	dev_dbg(hsotg->dev, "++Resume or Remote Wakeup Detected Interrupt++\n");
 	dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state);
 
@@ -368,10 +370,9 @@
 		/* Change to L0 state */
 		hsotg->lx_state = DWC2_L0;
 	} else {
-		if (hsotg->core_params->hibernation) {
-			dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS);
+		if (hsotg->core_params->hibernation)
 			return;
-		}
+
 		if (hsotg->lx_state != DWC2_L1) {
 			u32 pcgcctl = dwc2_readl(hsotg->regs + PCGCTL);
 
@@ -385,9 +386,6 @@
 			hsotg->lx_state = DWC2_L0;
 		}
 	}
-
-	/* Clear interrupt */
-	dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS);
 }
 
 /*
@@ -396,14 +394,14 @@
  */
 static void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg)
 {
+	dwc2_writel(GINTSTS_DISCONNINT, hsotg->regs + GINTSTS);
+
 	dev_dbg(hsotg->dev, "++Disconnect Detected Interrupt++ (%s) %s\n",
 		dwc2_is_host_mode(hsotg) ? "Host" : "Device",
 		dwc2_op_state_str(hsotg));
 
 	if (hsotg->op_state == OTG_STATE_A_HOST)
-		dwc2_hcd_disconnect(hsotg);
-
-	dwc2_writel(GINTSTS_DISCONNINT, hsotg->regs + GINTSTS);
+		dwc2_hcd_disconnect(hsotg, false);
 }
 
 /*
@@ -419,6 +417,9 @@
 	u32 dsts;
 	int ret;
 
+	/* Clear interrupt */
+	dwc2_writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS);
+
 	dev_dbg(hsotg->dev, "USB SUSPEND\n");
 
 	if (dwc2_is_device_mode(hsotg)) {
@@ -437,7 +438,7 @@
 			if (!dwc2_is_device_connected(hsotg)) {
 				dev_dbg(hsotg->dev,
 						"ignore suspend request before enumeration\n");
-				goto clear_int;
+				return;
 			}
 
 			ret = dwc2_enter_hibernation(hsotg);
@@ -476,10 +477,6 @@
 			hsotg->op_state = OTG_STATE_A_HOST;
 		}
 	}
-
-clear_int:
-	/* Clear interrupt */
-	dwc2_writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS);
 }
 
 #define GINTMSK_COMMON	(GINTSTS_WKUPINT | GINTSTS_SESSREQINT |		\
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 0abf73c..422ab7d 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -2095,7 +2095,7 @@
 	 */
 
 	/* catch both EnumSpd_FS and EnumSpd_FS48 */
-	switch (dsts & DSTS_ENUMSPD_MASK) {
+	switch ((dsts & DSTS_ENUMSPD_MASK) >> DSTS_ENUMSPD_SHIFT) {
 	case DSTS_ENUMSPD_FS:
 	case DSTS_ENUMSPD_FS48:
 		hsotg->gadget.speed = USB_SPEED_FULL;
@@ -2244,54 +2244,6 @@
 			GINTSTS_RXFLVL)
 
 /**
- * dwc2_hsotg_corereset - issue softreset to the core
- * @hsotg: The device state
- *
- * Issue a soft reset to the core, and await the core finishing it.
- */
-static int dwc2_hsotg_corereset(struct dwc2_hsotg *hsotg)
-{
-	int timeout;
-	u32 grstctl;
-
-	dev_dbg(hsotg->dev, "resetting core\n");
-
-	/* issue soft reset */
-	dwc2_writel(GRSTCTL_CSFTRST, hsotg->regs + GRSTCTL);
-
-	timeout = 10000;
-	do {
-		grstctl = dwc2_readl(hsotg->regs + GRSTCTL);
-	} while ((grstctl & GRSTCTL_CSFTRST) && timeout-- > 0);
-
-	if (grstctl & GRSTCTL_CSFTRST) {
-		dev_err(hsotg->dev, "Failed to get CSftRst asserted\n");
-		return -EINVAL;
-	}
-
-	timeout = 10000;
-
-	while (1) {
-		u32 grstctl = dwc2_readl(hsotg->regs + GRSTCTL);
-
-		if (timeout-- < 0) {
-			dev_info(hsotg->dev,
-				 "%s: reset failed, GRSTCTL=%08x\n",
-				 __func__, grstctl);
-			return -ETIMEDOUT;
-		}
-
-		if (!(grstctl & GRSTCTL_AHBIDLE))
-			continue;
-
-		break;		/* reset done */
-	}
-
-	dev_dbg(hsotg->dev, "reset successful\n");
-	return 0;
-}
-
-/**
  * dwc2_hsotg_core_init - issue softreset to the core
  * @hsotg: The device state
  *
@@ -2307,7 +2259,7 @@
 	kill_all_requests(hsotg, hsotg->eps_out[0], -ECONNRESET);
 
 	if (!is_usb_reset)
-		if (dwc2_hsotg_corereset(hsotg))
+		if (dwc2_core_reset(hsotg))
 			return;
 
 	/*
@@ -2585,7 +2537,7 @@
 	if (gintsts & GINTSTS_GOUTNAKEFF) {
 		dev_info(hsotg->dev, "GOUTNakEff triggered\n");
 
-		dwc2_writel(DCTL_CGOUTNAK, hsotg->regs + DCTL);
+		__orr32(hsotg->regs + DCTL, DCTL_CGOUTNAK);
 
 		dwc2_hsotg_dump(hsotg);
 	}
@@ -2593,7 +2545,7 @@
 	if (gintsts & GINTSTS_GINNAKEFF) {
 		dev_info(hsotg->dev, "GINNakEff triggered\n");
 
-		dwc2_writel(DCTL_CGNPINNAK, hsotg->regs + DCTL);
+		__orr32(hsotg->regs + DCTL, DCTL_CGNPINNAK);
 
 		dwc2_hsotg_dump(hsotg);
 	}
@@ -2911,15 +2863,15 @@
 				"%s: timeout DIEPINT.NAKEFF\n", __func__);
 	} else {
 		/* Clear any pending nak effect interrupt */
-		dwc2_writel(GINTSTS_GINNAKEFF, hsotg->regs + GINTSTS);
+		dwc2_writel(GINTSTS_GOUTNAKEFF, hsotg->regs + GINTSTS);
 
-		__orr32(hsotg->regs + DCTL, DCTL_SGNPINNAK);
+		__orr32(hsotg->regs + DCTL, DCTL_SGOUTNAK);
 
 		/* Wait for global nak to take effect */
 		if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS,
-						GINTSTS_GINNAKEFF, 100))
+						GINTSTS_GOUTNAKEFF, 100))
 			dev_warn(hsotg->dev,
-				"%s: timeout GINTSTS.GINNAKEFF\n", __func__);
+				"%s: timeout GINTSTS.GOUTNAKEFF\n", __func__);
 	}
 
 	/* Disable ep */
@@ -2944,7 +2896,7 @@
 		/* TODO: Flush shared tx fifo */
 	} else {
 		/* Remove global NAKs */
-		__bic32(hsotg->regs + DCTL, DCTL_SGNPINNAK);
+		__bic32(hsotg->regs + DCTL, DCTL_SGOUTNAK);
 	}
 }
 
@@ -3403,8 +3355,8 @@
 
 	/* check hardware configuration */
 
-	cfg = dwc2_readl(hsotg->regs + GHWCFG2);
-	hsotg->num_of_eps = (cfg >> GHWCFG2_NUM_DEV_EP_SHIFT) & 0xF;
+	hsotg->num_of_eps = hsotg->hw_params.num_dev_ep;
+
 	/* Add ep0 */
 	hsotg->num_of_eps++;
 
@@ -3415,7 +3367,7 @@
 	/* Same dwc2_hsotg_ep is used in both directions for ep0 */
 	hsotg->eps_out[0] = hsotg->eps_in[0];
 
-	cfg = dwc2_readl(hsotg->regs + GHWCFG1);
+	cfg = hsotg->hw_params.dev_ep_dirs;
 	for (i = 1, cfg >>= 2; i < hsotg->num_of_eps; i++, cfg >>= 2) {
 		ep_type = cfg & 3;
 		/* Direction in or both */
@@ -3434,11 +3386,8 @@
 		}
 	}
 
-	cfg = dwc2_readl(hsotg->regs + GHWCFG3);
-	hsotg->fifo_mem = (cfg >> GHWCFG3_DFIFO_DEPTH_SHIFT);
-
-	cfg = dwc2_readl(hsotg->regs + GHWCFG4);
-	hsotg->dedicated_fifos = (cfg >> GHWCFG4_DED_FIFO_SHIFT) & 1;
+	hsotg->fifo_mem = hsotg->hw_params.total_fifo_size;
+	hsotg->dedicated_fifos = hsotg->hw_params.en_multiple_tx_fifo;
 
 	dev_info(hsotg->dev, "EPs: %d, %s fifos, %d entries in SPRAM\n",
 		 hsotg->num_of_eps,
@@ -3563,6 +3512,17 @@
 	memcpy(&hsotg->g_tx_fifo_sz[1], p_tx_fifo, sizeof(p_tx_fifo));
 	/* Device tree specific probe */
 	dwc2_hsotg_of_probe(hsotg);
+
+	/* Check against largest possible value. */
+	if (hsotg->g_np_g_tx_fifo_sz >
+	    hsotg->hw_params.dev_nperio_tx_fifo_size) {
+		dev_warn(dev, "Specified GNPTXFDEP=%d > %d\n",
+			 hsotg->g_np_g_tx_fifo_sz,
+			 hsotg->hw_params.dev_nperio_tx_fifo_size);
+		hsotg->g_np_g_tx_fifo_sz =
+			hsotg->hw_params.dev_nperio_tx_fifo_size;
+	}
+
 	/* Dump fifo information */
 	dev_dbg(dev, "NonPeriodic TXFIFO size: %d\n",
 						hsotg->g_np_g_tx_fifo_sz);
@@ -3579,31 +3539,12 @@
 	else if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
 		hsotg->op_state = OTG_STATE_B_PERIPHERAL;
 
-	/*
-	 * Force Device mode before initialization.
-	 * This allows correctly configuring fifo for device mode.
-	 */
-	__bic32(hsotg->regs + GUSBCFG, GUSBCFG_FORCEHOSTMODE);
-	__orr32(hsotg->regs + GUSBCFG, GUSBCFG_FORCEDEVMODE);
-
-	/*
-	 * According to Synopsys databook, this sleep is needed for the force
-	 * device mode to take effect.
-	 */
-	msleep(25);
-
-	dwc2_hsotg_corereset(hsotg);
 	ret = dwc2_hsotg_hw_cfg(hsotg);
 	if (ret) {
 		dev_err(hsotg->dev, "Hardware configuration failed: %d\n", ret);
 		return ret;
 	}
 
-	dwc2_hsotg_init(hsotg);
-
-	/* Switch back to default configuration */
-	__bic32(hsotg->regs + GUSBCFG, GUSBCFG_FORCEDEVMODE);
-
 	hsotg->ctrl_buff = devm_kzalloc(hsotg->dev,
 			DWC2_CTRL_BUFF_SIZE, GFP_KERNEL);
 	if (!hsotg->ctrl_buff) {
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 571c217..8847c72 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -268,15 +268,33 @@
 }
 
 /**
- * dwc2_hcd_disconnect() - Handles disconnect of the HCD
+ * dwc2_hcd_connect() - Handles connect of the HCD
  *
  * @hsotg: Pointer to struct dwc2_hsotg
  *
  * Must be called with interrupt disabled and spinlock held
  */
-void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg)
+void dwc2_hcd_connect(struct dwc2_hsotg *hsotg)
+{
+	if (hsotg->lx_state != DWC2_L0)
+		usb_hcd_resume_root_hub(hsotg->priv);
+
+	hsotg->flags.b.port_connect_status_change = 1;
+	hsotg->flags.b.port_connect_status = 1;
+}
+
+/**
+ * dwc2_hcd_disconnect() - Handles disconnect of the HCD
+ *
+ * @hsotg: Pointer to struct dwc2_hsotg
+ * @force: If true, we won't try to reconnect even if we see device connected.
+ *
+ * Must be called with interrupt disabled and spinlock held
+ */
+void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force)
 {
 	u32 intr;
+	u32 hprt0;
 
 	/* Set status flags for the hub driver */
 	hsotg->flags.b.port_connect_status_change = 1;
@@ -315,6 +333,24 @@
 		dwc2_hcd_cleanup_channels(hsotg);
 
 	dwc2_host_disconnect(hsotg);
+
+	/*
+	 * Add an extra check here to see if we're actually connected but
+	 * we don't have a detection interrupt pending.  This can happen if:
+	 *   1. hardware sees connect
+	 *   2. hardware sees disconnect
+	 *   3. hardware sees connect
+	 *   4. dwc2_port_intr() - clears connect interrupt
+	 *   5. dwc2_handle_common_intr() - calls here
+	 *
+	 * Without the extra check here we will end calling disconnect
+	 * and won't get any future interrupts to handle the connect.
+	 */
+	if (!force) {
+		hprt0 = dwc2_readl(hsotg->regs + HPRT0);
+		if (!(hprt0 & HPRT0_CONNDET) && (hprt0 & HPRT0_CONNSTS))
+			dwc2_hcd_connect(hsotg);
+	}
 }
 
 /**
@@ -881,8 +917,10 @@
 		 */
 		chan->multi_count = dwc2_hb_mult(qh->maxp);
 
-	if (hsotg->core_params->dma_desc_enable > 0)
+	if (hsotg->core_params->dma_desc_enable > 0) {
 		chan->desc_list_addr = qh->desc_list_dma;
+		chan->desc_list_sz = qh->desc_list_sz;
+	}
 
 	dwc2_hc_init(hsotg, chan);
 	chan->qh = qh;
@@ -1382,7 +1420,7 @@
 			dev_err(hsotg->dev,
 				"Connection id status change timed out\n");
 		hsotg->op_state = OTG_STATE_B_PERIPHERAL;
-		dwc2_core_init(hsotg, false, -1);
+		dwc2_core_init(hsotg, false);
 		dwc2_enable_global_interrupts(hsotg);
 		spin_lock_irqsave(&hsotg->lock, flags);
 		dwc2_hsotg_core_init_disconnected(hsotg, false);
@@ -1405,7 +1443,7 @@
 		hsotg->op_state = OTG_STATE_A_HOST;
 
 		/* Initialize the Core for Host mode */
-		dwc2_core_init(hsotg, false, -1);
+		dwc2_core_init(hsotg, false);
 		dwc2_enable_global_interrupts(hsotg);
 		dwc2_hcd_start(hsotg);
 	}
@@ -1734,6 +1772,28 @@
 			port_status |= USB_PORT_STAT_TEST;
 		/* USB_PORT_FEAT_INDICATOR unsupported always 0 */
 
+		if (hsotg->core_params->dma_desc_fs_enable) {
+			/*
+			 * Enable descriptor DMA only if a full speed
+			 * device is connected.
+			 */
+			if (hsotg->new_connection &&
+			    ((port_status &
+			      (USB_PORT_STAT_CONNECTION |
+			       USB_PORT_STAT_HIGH_SPEED |
+			       USB_PORT_STAT_LOW_SPEED)) ==
+			       USB_PORT_STAT_CONNECTION)) {
+				u32 hcfg;
+
+				dev_info(hsotg->dev, "Enabling descriptor DMA mode\n");
+				hsotg->core_params->dma_desc_enable = 1;
+				hcfg = dwc2_readl(hsotg->regs + HCFG);
+				hcfg |= HCFG_DESCDMA;
+				dwc2_writel(hcfg, hsotg->regs + HCFG);
+				hsotg->new_connection = false;
+			}
+		}
+
 		dev_vdbg(hsotg->dev, "port_status=%08x\n", port_status);
 		*(__le32 *)buf = cpu_to_le32(port_status);
 		break;
@@ -2298,13 +2358,19 @@
 {
 	struct dwc2_hsotg *hsotg = container_of(work, struct dwc2_hsotg,
 						reset_work.work);
+	unsigned long flags;
 	u32 hprt0;
 
 	dev_dbg(hsotg->dev, "USB RESET function called\n");
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+
 	hprt0 = dwc2_read_hprt0(hsotg);
 	hprt0 &= ~HPRT0_RST;
 	dwc2_writel(hprt0, hsotg->regs + HPRT0);
 	hsotg->flags.b.port_reset_change = 1;
+
+	spin_unlock_irqrestore(&hsotg->lock, flags);
 }
 
 /*
@@ -2366,7 +2432,7 @@
 
 	spin_lock_irqsave(&hsotg->lock, flags);
 	/* Ensure hcd is disconnected */
-	dwc2_hcd_disconnect(hsotg);
+	dwc2_hcd_disconnect(hsotg, true);
 	dwc2_hcd_stop(hsotg);
 	hsotg->lx_state = DWC2_L3;
 	hcd->state = HC_STATE_HALT;
@@ -3054,7 +3120,7 @@
 	dwc2_disable_global_interrupts(hsotg);
 
 	/* Initialize the DWC_otg core, and select the Phy type */
-	retval = dwc2_core_init(hsotg, true, irq);
+	retval = dwc2_core_init(hsotg, true);
 	if (retval)
 		goto error2;
 
@@ -3122,6 +3188,47 @@
 	if (!hsotg->status_buf)
 		goto error3;
 
+	/*
+	 * Create kmem caches to handle descriptor buffers in descriptor
+	 * DMA mode.
+	 * Alignment must be set to 512 bytes.
+	 */
+	if (hsotg->core_params->dma_desc_enable ||
+	    hsotg->core_params->dma_desc_fs_enable) {
+		hsotg->desc_gen_cache = kmem_cache_create("dwc2-gen-desc",
+				sizeof(struct dwc2_hcd_dma_desc) *
+				MAX_DMA_DESC_NUM_GENERIC, 512, SLAB_CACHE_DMA,
+				NULL);
+		if (!hsotg->desc_gen_cache) {
+			dev_err(hsotg->dev,
+				"unable to create dwc2 generic desc cache\n");
+
+			/*
+			 * Disable descriptor dma mode since it will not be
+			 * usable.
+			 */
+			hsotg->core_params->dma_desc_enable = 0;
+			hsotg->core_params->dma_desc_fs_enable = 0;
+		}
+
+		hsotg->desc_hsisoc_cache = kmem_cache_create("dwc2-hsisoc-desc",
+				sizeof(struct dwc2_hcd_dma_desc) *
+				MAX_DMA_DESC_NUM_HS_ISOC, 512, 0, NULL);
+		if (!hsotg->desc_hsisoc_cache) {
+			dev_err(hsotg->dev,
+				"unable to create dwc2 hs isoc desc cache\n");
+
+			kmem_cache_destroy(hsotg->desc_gen_cache);
+
+			/*
+			 * Disable descriptor dma mode since it will not be
+			 * usable.
+			 */
+			hsotg->core_params->dma_desc_enable = 0;
+			hsotg->core_params->dma_desc_fs_enable = 0;
+		}
+	}
+
 	hsotg->otg_port = 1;
 	hsotg->frame_list = NULL;
 	hsotg->frame_list_dma = 0;
@@ -3145,7 +3252,7 @@
 	 */
 	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (retval < 0)
-		goto error3;
+		goto error4;
 
 	device_wakeup_enable(hcd->self.controller);
 
@@ -3155,6 +3262,9 @@
 
 	return 0;
 
+error4:
+	kmem_cache_destroy(hsotg->desc_gen_cache);
+	kmem_cache_destroy(hsotg->desc_hsisoc_cache);
 error3:
 	dwc2_hcd_release(hsotg);
 error2:
@@ -3195,6 +3305,10 @@
 
 	usb_remove_hcd(hcd);
 	hsotg->priv = NULL;
+
+	kmem_cache_destroy(hsotg->desc_gen_cache);
+	kmem_cache_destroy(hsotg->desc_hsisoc_cache);
+
 	dwc2_hcd_release(hsotg);
 	usb_put_hcd(hcd);
 
diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h
index f105bad..8f0a29c 100644
--- a/drivers/usb/dwc2/hcd.h
+++ b/drivers/usb/dwc2/hcd.h
@@ -107,6 +107,7 @@
  * @qh:                 QH for the transfer being processed by this channel
  * @hc_list_entry:      For linking to list of host channels
  * @desc_list_addr:     Current QH's descriptor list DMA address
+ * @desc_list_sz:       Current QH's descriptor list size
  *
  * This structure represents the state of a single host channel when acting in
  * host mode. It contains the data items needed to transfer packets to an
@@ -159,6 +160,7 @@
 	struct dwc2_qh *qh;
 	struct list_head hc_list_entry;
 	dma_addr_t desc_list_addr;
+	u32 desc_list_sz;
 };
 
 struct dwc2_hcd_pipe_info {
@@ -251,6 +253,7 @@
  *                      schedule
  * @desc_list:          List of transfer descriptors
  * @desc_list_dma:      Physical address of desc_list
+ * @desc_list_sz:       Size of descriptors list
  * @n_bytes:            Xfer Bytes array. Each element corresponds to a transfer
  *                      descriptor and indicates original XferSize value for the
  *                      descriptor
@@ -284,6 +287,7 @@
 	struct list_head qh_list_entry;
 	struct dwc2_hcd_dma_desc *desc_list;
 	dma_addr_t desc_list_dma;
+	u32 desc_list_sz;
 	u32 *n_bytes;
 	unsigned tt_buffer_dirty:1;
 };
@@ -340,6 +344,8 @@
 	u8 isoc_split_pos;
 	u16 isoc_frame_index;
 	u16 isoc_split_offset;
+	u16 isoc_td_last;
+	u16 isoc_td_first;
 	u32 ssplit_out_xfer_count;
 	u8 error_count;
 	u8 n_desc;
@@ -378,18 +384,6 @@
 }
 
 /*
- * Returns the mode of operation, host or device
- */
-static inline int dwc2_is_host_mode(struct dwc2_hsotg *hsotg)
-{
-	return (dwc2_readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) != 0;
-}
-static inline int dwc2_is_device_mode(struct dwc2_hsotg *hsotg)
-{
-	return (dwc2_readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) == 0;
-}
-
-/*
  * Reads HPRT0 in preparation to modify. It keeps the WC bits 0 so that if they
  * are read as 1, they won't clear when written back.
  */
@@ -535,6 +529,19 @@
 #define dwc2_max_packet(wmaxpacketsize) ((wmaxpacketsize) & 0x07ff)
 
 /*
+ * Returns true if frame1 index is greater than frame2 index. The comparison
+ * is done modulo FRLISTEN_64_SIZE. This accounts for the rollover of the
+ * frame number when the max index frame number is reached.
+ */
+static inline bool dwc2_frame_idx_num_gt(u16 fr_idx1, u16 fr_idx2)
+{
+	u16 diff = fr_idx1 - fr_idx2;
+	u16 sign = diff & (FRLISTEN_64_SIZE >> 1);
+
+	return diff && !sign;
+}
+
+/*
  * Returns true if frame1 is less than or equal to frame2. The comparison is
  * done modulo HFNUM_MAX_FRNUM. This accounts for the rollover of the
  * frame number when the max frame number is reached.
diff --git a/drivers/usb/dwc2/hcd_ddma.c b/drivers/usb/dwc2/hcd_ddma.c
index 78993ab..36606fc 100644
--- a/drivers/usb/dwc2/hcd_ddma.c
+++ b/drivers/usb/dwc2/hcd_ddma.c
@@ -87,22 +87,31 @@
 static int dwc2_desc_list_alloc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
 				gfp_t flags)
 {
-	qh->desc_list = dma_alloc_coherent(hsotg->dev,
-				sizeof(struct dwc2_hcd_dma_desc) *
-				dwc2_max_desc_num(qh), &qh->desc_list_dma,
-				flags);
+	struct kmem_cache *desc_cache;
 
+	if (qh->ep_type == USB_ENDPOINT_XFER_ISOC
+	    && qh->dev_speed == USB_SPEED_HIGH)
+		desc_cache = hsotg->desc_hsisoc_cache;
+	else
+		desc_cache = hsotg->desc_gen_cache;
+
+	qh->desc_list_sz = sizeof(struct dwc2_hcd_dma_desc) *
+						dwc2_max_desc_num(qh);
+
+	qh->desc_list = kmem_cache_zalloc(desc_cache, flags | GFP_DMA);
 	if (!qh->desc_list)
 		return -ENOMEM;
 
-	memset(qh->desc_list, 0,
-	       sizeof(struct dwc2_hcd_dma_desc) * dwc2_max_desc_num(qh));
+	qh->desc_list_dma = dma_map_single(hsotg->dev, qh->desc_list,
+					   qh->desc_list_sz,
+					   DMA_TO_DEVICE);
 
 	qh->n_bytes = kzalloc(sizeof(u32) * dwc2_max_desc_num(qh), flags);
 	if (!qh->n_bytes) {
-		dma_free_coherent(hsotg->dev, sizeof(struct dwc2_hcd_dma_desc)
-				  * dwc2_max_desc_num(qh), qh->desc_list,
-				  qh->desc_list_dma);
+		dma_unmap_single(hsotg->dev, qh->desc_list_dma,
+				 qh->desc_list_sz,
+				 DMA_FROM_DEVICE);
+		kfree(qh->desc_list);
 		qh->desc_list = NULL;
 		return -ENOMEM;
 	}
@@ -112,10 +121,18 @@
 
 static void dwc2_desc_list_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
 {
+	struct kmem_cache *desc_cache;
+
+	if (qh->ep_type == USB_ENDPOINT_XFER_ISOC
+	    && qh->dev_speed == USB_SPEED_HIGH)
+		desc_cache = hsotg->desc_hsisoc_cache;
+	else
+		desc_cache = hsotg->desc_gen_cache;
+
 	if (qh->desc_list) {
-		dma_free_coherent(hsotg->dev, sizeof(struct dwc2_hcd_dma_desc)
-				  * dwc2_max_desc_num(qh), qh->desc_list,
-				  qh->desc_list_dma);
+		dma_unmap_single(hsotg->dev, qh->desc_list_dma,
+				 qh->desc_list_sz, DMA_FROM_DEVICE);
+		kmem_cache_free(desc_cache, qh->desc_list);
 		qh->desc_list = NULL;
 	}
 
@@ -128,21 +145,20 @@
 	if (hsotg->frame_list)
 		return 0;
 
-	hsotg->frame_list = dma_alloc_coherent(hsotg->dev,
-					       4 * FRLISTEN_64_SIZE,
-					       &hsotg->frame_list_dma,
-					       mem_flags);
+	hsotg->frame_list_sz = 4 * FRLISTEN_64_SIZE;
+	hsotg->frame_list = kzalloc(hsotg->frame_list_sz, GFP_ATOMIC | GFP_DMA);
 	if (!hsotg->frame_list)
 		return -ENOMEM;
 
-	memset(hsotg->frame_list, 0, 4 * FRLISTEN_64_SIZE);
+	hsotg->frame_list_dma = dma_map_single(hsotg->dev, hsotg->frame_list,
+					       hsotg->frame_list_sz,
+					       DMA_TO_DEVICE);
+
 	return 0;
 }
 
 static void dwc2_frame_list_free(struct dwc2_hsotg *hsotg)
 {
-	u32 *frame_list;
-	dma_addr_t frame_list_dma;
 	unsigned long flags;
 
 	spin_lock_irqsave(&hsotg->lock, flags);
@@ -152,14 +168,14 @@
 		return;
 	}
 
-	frame_list = hsotg->frame_list;
-	frame_list_dma = hsotg->frame_list_dma;
+	dma_unmap_single(hsotg->dev, hsotg->frame_list_dma,
+			 hsotg->frame_list_sz, DMA_FROM_DEVICE);
+
+	kfree(hsotg->frame_list);
 	hsotg->frame_list = NULL;
 
 	spin_unlock_irqrestore(&hsotg->lock, flags);
 
-	dma_free_coherent(hsotg->dev, 4 * FRLISTEN_64_SIZE, frame_list,
-			  frame_list_dma);
 }
 
 static void dwc2_per_sched_enable(struct dwc2_hsotg *hsotg, u32 fr_list_en)
@@ -249,6 +265,15 @@
 		j = (j + inc) & (FRLISTEN_64_SIZE - 1);
 	} while (j != i);
 
+	/*
+	 * Sync frame list since controller will access it if periodic
+	 * channel is currently enabled.
+	 */
+	dma_sync_single_for_device(hsotg->dev,
+				   hsotg->frame_list_dma,
+				   hsotg->frame_list_sz,
+				   DMA_TO_DEVICE);
+
 	if (!enable)
 		return;
 
@@ -278,6 +303,7 @@
 			hsotg->non_periodic_channels--;
 	} else {
 		dwc2_update_frame_list(hsotg, qh, 0);
+		hsotg->available_host_channels++;
 	}
 
 	/*
@@ -360,6 +386,8 @@
  */
 void dwc2_hcd_qh_free_ddma(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
 {
+	unsigned long flags;
+
 	dwc2_desc_list_free(hsotg, qh);
 
 	/*
@@ -369,8 +397,10 @@
 	 * when it comes here from endpoint disable routine
 	 * channel remains assigned.
 	 */
+	spin_lock_irqsave(&hsotg->lock, flags);
 	if (qh->channel)
 		dwc2_release_channel_ddma(hsotg, qh);
+	spin_unlock_irqrestore(&hsotg->lock, flags);
 
 	if ((qh->ep_type == USB_ENDPOINT_XFER_ISOC ||
 	     qh->ep_type == USB_ENDPOINT_XFER_INT) &&
@@ -524,14 +554,23 @@
 	dma_desc->status = qh->n_bytes[idx] << HOST_DMA_ISOC_NBYTES_SHIFT &
 			   HOST_DMA_ISOC_NBYTES_MASK;
 
+	/* Set active bit */
+	dma_desc->status |= HOST_DMA_A;
+
+	qh->ntd++;
+	qtd->isoc_frame_index_last++;
+
 #ifdef ISOC_URB_GIVEBACK_ASAP
 	/* Set IOC for each descriptor corresponding to last frame of URB */
 	if (qtd->isoc_frame_index_last == qtd->urb->packet_count)
 		dma_desc->status |= HOST_DMA_IOC;
 #endif
 
-	qh->ntd++;
-	qtd->isoc_frame_index_last++;
+	dma_sync_single_for_device(hsotg->dev,
+			qh->desc_list_dma +
+			(idx * sizeof(struct dwc2_hcd_dma_desc)),
+			sizeof(struct dwc2_hcd_dma_desc),
+			DMA_TO_DEVICE);
 }
 
 static void dwc2_init_isoc_dma_desc(struct dwc2_hsotg *hsotg,
@@ -539,11 +578,32 @@
 {
 	struct dwc2_qtd *qtd;
 	u32 max_xfer_size;
-	u16 idx, inc, n_desc, ntd_max = 0;
+	u16 idx, inc, n_desc = 0, ntd_max = 0;
+	u16 cur_idx;
+	u16 next_idx;
 
 	idx = qh->td_last;
 	inc = qh->interval;
-	n_desc = 0;
+	hsotg->frame_number = dwc2_hcd_get_frame_number(hsotg);
+	cur_idx = dwc2_frame_list_idx(hsotg->frame_number);
+	next_idx = dwc2_desclist_idx_inc(qh->td_last, inc, qh->dev_speed);
+
+	/*
+	 * Ensure current frame number didn't overstep last scheduled
+	 * descriptor. If it happens, the only way to recover is to move
+	 * qh->td_last to current frame number + 1.
+	 * So that next isoc descriptor will be scheduled on frame number + 1
+	 * and not on a past frame.
+	 */
+	if (dwc2_frame_idx_num_gt(cur_idx, next_idx) || (cur_idx == next_idx)) {
+		if (inc < 32) {
+			dev_vdbg(hsotg->dev,
+				 "current frame number overstep last descriptor\n");
+			qh->td_last = dwc2_desclist_idx_inc(cur_idx, inc,
+							    qh->dev_speed);
+			idx = qh->td_last;
+		}
+	}
 
 	if (qh->interval) {
 		ntd_max = (dwc2_max_desc_num(qh) + qh->interval - 1) /
@@ -556,15 +616,20 @@
 			MAX_ISOC_XFER_SIZE_HS : MAX_ISOC_XFER_SIZE_FS;
 
 	list_for_each_entry(qtd, &qh->qtd_list, qtd_list_entry) {
+		if (qtd->in_process &&
+		    qtd->isoc_frame_index_last ==
+		    qtd->urb->packet_count)
+			continue;
+
+		qtd->isoc_td_first = idx;
 		while (qh->ntd < ntd_max && qtd->isoc_frame_index_last <
 						qtd->urb->packet_count) {
-			if (n_desc > 1)
-				qh->desc_list[n_desc - 1].status |= HOST_DMA_A;
 			dwc2_fill_host_isoc_dma_desc(hsotg, qtd, qh,
 						     max_xfer_size, idx);
 			idx = dwc2_desclist_idx_inc(idx, inc, qh->dev_speed);
 			n_desc++;
 		}
+		qtd->isoc_td_last = idx;
 		qtd->in_process = 1;
 	}
 
@@ -575,6 +640,11 @@
 	if (qh->ntd == ntd_max) {
 		idx = dwc2_desclist_idx_dec(qh->td_last, inc, qh->dev_speed);
 		qh->desc_list[idx].status |= HOST_DMA_IOC;
+		dma_sync_single_for_device(hsotg->dev,
+					   qh->desc_list_dma + (idx *
+					   sizeof(struct dwc2_hcd_dma_desc)),
+					   sizeof(struct dwc2_hcd_dma_desc),
+					   DMA_TO_DEVICE);
 	}
 #else
 	/*
@@ -604,13 +674,12 @@
 		idx = dwc2_desclist_idx_dec(qh->td_last, inc, qh->dev_speed);
 
 	qh->desc_list[idx].status |= HOST_DMA_IOC;
+	dma_sync_single_for_device(hsotg->dev,
+				   qh->desc_list_dma +
+				   (idx * sizeof(struct dwc2_hcd_dma_desc)),
+				   sizeof(struct dwc2_hcd_dma_desc),
+				   DMA_TO_DEVICE);
 #endif
-
-	if (n_desc) {
-		qh->desc_list[n_desc - 1].status |= HOST_DMA_A;
-		if (n_desc > 1)
-			qh->desc_list[0].status |= HOST_DMA_A;
-	}
 }
 
 static void dwc2_fill_host_dma_desc(struct dwc2_hsotg *hsotg,
@@ -647,6 +716,12 @@
 
 	dma_desc->buf = (u32)chan->xfer_dma;
 
+	dma_sync_single_for_device(hsotg->dev,
+				   qh->desc_list_dma +
+				   (n_desc * sizeof(struct dwc2_hcd_dma_desc)),
+				   sizeof(struct dwc2_hcd_dma_desc),
+				   DMA_TO_DEVICE);
+
 	/*
 	 * Last (or only) descriptor of IN transfer with actual size less
 	 * than MaxPacket
@@ -697,6 +772,12 @@
 					 "set A bit in desc %d (%p)\n",
 					 n_desc - 1,
 					 &qh->desc_list[n_desc - 1]);
+				dma_sync_single_for_device(hsotg->dev,
+					qh->desc_list_dma +
+					((n_desc - 1) *
+					sizeof(struct dwc2_hcd_dma_desc)),
+					sizeof(struct dwc2_hcd_dma_desc),
+					DMA_TO_DEVICE);
 			}
 			dwc2_fill_host_dma_desc(hsotg, chan, qtd, qh, n_desc);
 			dev_vdbg(hsotg->dev,
@@ -722,10 +803,19 @@
 				HOST_DMA_IOC | HOST_DMA_EOL | HOST_DMA_A;
 		dev_vdbg(hsotg->dev, "set IOC/EOL/A bits in desc %d (%p)\n",
 			 n_desc - 1, &qh->desc_list[n_desc - 1]);
+		dma_sync_single_for_device(hsotg->dev,
+					   qh->desc_list_dma + (n_desc - 1) *
+					   sizeof(struct dwc2_hcd_dma_desc),
+					   sizeof(struct dwc2_hcd_dma_desc),
+					   DMA_TO_DEVICE);
 		if (n_desc > 1) {
 			qh->desc_list[0].status |= HOST_DMA_A;
 			dev_vdbg(hsotg->dev, "set A bit in desc 0 (%p)\n",
 				 &qh->desc_list[0]);
+			dma_sync_single_for_device(hsotg->dev,
+					qh->desc_list_dma,
+					sizeof(struct dwc2_hcd_dma_desc),
+					DMA_TO_DEVICE);
 		}
 		chan->ntd = n_desc;
 	}
@@ -800,7 +890,7 @@
 					struct dwc2_qtd *qtd,
 					struct dwc2_qh *qh, u16 idx)
 {
-	struct dwc2_hcd_dma_desc *dma_desc = &qh->desc_list[idx];
+	struct dwc2_hcd_dma_desc *dma_desc;
 	struct dwc2_hcd_iso_packet_desc *frame_desc;
 	u16 remain = 0;
 	int rc = 0;
@@ -808,6 +898,13 @@
 	if (!qtd->urb)
 		return -EINVAL;
 
+	dma_sync_single_for_cpu(hsotg->dev, qh->desc_list_dma + (idx *
+				sizeof(struct dwc2_hcd_dma_desc)),
+				sizeof(struct dwc2_hcd_dma_desc),
+				DMA_FROM_DEVICE);
+
+	dma_desc = &qh->desc_list[idx];
+
 	frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index_last];
 	dma_desc->buf = (u32)(qtd->urb->dma + frame_desc->offset);
 	if (chan->ep_is_in)
@@ -911,17 +1008,51 @@
 	list_for_each_entry_safe(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) {
 		if (!qtd->in_process)
 			break;
+
+		/*
+		 * Ensure idx corresponds to descriptor where first urb of this
+		 * qtd was added. In fact, during isoc desc init, dwc2 may skip
+		 * an index if current frame number is already over this index.
+		 */
+		if (idx != qtd->isoc_td_first) {
+			dev_vdbg(hsotg->dev,
+				 "try to complete %d instead of %d\n",
+				 idx, qtd->isoc_td_first);
+			idx = qtd->isoc_td_first;
+		}
+
 		do {
+			struct dwc2_qtd *qtd_next;
+			u16 cur_idx;
+
 			rc = dwc2_cmpl_host_isoc_dma_desc(hsotg, chan, qtd, qh,
 							  idx);
 			if (rc < 0)
 				return;
 			idx = dwc2_desclist_idx_inc(idx, qh->interval,
 						    chan->speed);
-			if (rc == DWC2_CMPL_STOP)
-				goto stop_scan;
+			if (!rc)
+				continue;
+
 			if (rc == DWC2_CMPL_DONE)
 				break;
+
+			/* rc == DWC2_CMPL_STOP */
+
+			if (qh->interval >= 32)
+				goto stop_scan;
+
+			qh->td_first = idx;
+			cur_idx = dwc2_frame_list_idx(hsotg->frame_number);
+			qtd_next = list_first_entry(&qh->qtd_list,
+						    struct dwc2_qtd,
+						    qtd_list_entry);
+			if (dwc2_frame_idx_num_gt(cur_idx,
+						  qtd_next->isoc_td_last))
+				break;
+
+			goto stop_scan;
+
 		} while (idx != qh->td_first);
 	}
 
@@ -1029,6 +1160,12 @@
 	if (!urb)
 		return -EINVAL;
 
+	dma_sync_single_for_cpu(hsotg->dev,
+				qh->desc_list_dma + (desc_num *
+				sizeof(struct dwc2_hcd_dma_desc)),
+				sizeof(struct dwc2_hcd_dma_desc),
+				DMA_FROM_DEVICE);
+
 	dma_desc = &qh->desc_list[desc_num];
 	n_bytes = qh->n_bytes[desc_num];
 	dev_vdbg(hsotg->dev,
@@ -1037,7 +1174,10 @@
 	failed = dwc2_update_non_isoc_urb_state_ddma(hsotg, chan, qtd, dma_desc,
 						     halt_status, n_bytes,
 						     xfer_done);
-	if (failed || (*xfer_done && urb->status != -EINPROGRESS)) {
+	if (*xfer_done && urb->status != -EINPROGRESS)
+		failed = 1;
+
+	if (failed) {
 		dwc2_host_complete(hsotg, qtd, urb->status);
 		dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
 		dev_vdbg(hsotg->dev, "failed=%1x xfer_done=%1x status=%08x\n",
@@ -1165,6 +1305,21 @@
 		/* Release the channel if halted or session completed */
 		if (halt_status != DWC2_HC_XFER_COMPLETE ||
 		    list_empty(&qh->qtd_list)) {
+			struct dwc2_qtd *qtd, *qtd_tmp;
+
+			/*
+			 * Kill all remainings QTDs since channel has been
+			 * halted.
+			 */
+			list_for_each_entry_safe(qtd, qtd_tmp,
+						 &qh->qtd_list,
+						 qtd_list_entry) {
+				dwc2_host_complete(hsotg, qtd,
+						   -ECONNRESET);
+				dwc2_hcd_qtd_unlink_and_free(hsotg,
+							     qtd, qh);
+			}
+
 			/* Halt the channel if session completed */
 			if (halt_status == DWC2_HC_XFER_COMPLETE)
 				dwc2_hc_halt(hsotg, chan, halt_status);
@@ -1174,7 +1329,12 @@
 			/* Keep in assigned schedule to continue transfer */
 			list_move(&qh->qh_list_entry,
 				  &hsotg->periodic_sched_assigned);
-			continue_isoc_xfer = 1;
+			/*
+			 * If channel has been halted during giveback of urb
+			 * then prevent any new scheduling.
+			 */
+			if (!chan->halt_status)
+				continue_isoc_xfer = 1;
 		}
 		/*
 		 * Todo: Consider the case when period exceeds FrameList size.
diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
index bda0b21..f825380 100644
--- a/drivers/usb/dwc2/hcd_intr.c
+++ b/drivers/usb/dwc2/hcd_intr.c
@@ -122,6 +122,9 @@
 	struct dwc2_qh *qh;
 	enum dwc2_transaction_type tr_type;
 
+	/* Clear interrupt */
+	dwc2_writel(GINTSTS_SOF, hsotg->regs + GINTSTS);
+
 #ifdef DEBUG_SOF
 	dev_vdbg(hsotg->dev, "--Start of Frame Interrupt--\n");
 #endif
@@ -146,9 +149,6 @@
 	tr_type = dwc2_hcd_select_transactions(hsotg);
 	if (tr_type != DWC2_TRANSACTION_NONE)
 		dwc2_hcd_queue_transactions(hsotg, tr_type);
-
-	/* Clear interrupt */
-	dwc2_writel(GINTSTS_SOF, hsotg->regs + GINTSTS);
 }
 
 /*
@@ -312,6 +312,7 @@
 
 	if (do_reset) {
 		*hprt0_modify |= HPRT0_RST;
+		dwc2_writel(*hprt0_modify, hsotg->regs + HPRT0);
 		queue_delayed_work(hsotg->wq_otg, &hsotg->reset_work,
 				   msecs_to_jiffies(60));
 	} else {
@@ -347,15 +348,12 @@
 	 * Set flag and clear if detected
 	 */
 	if (hprt0 & HPRT0_CONNDET) {
+		dwc2_writel(hprt0_modify | HPRT0_CONNDET, hsotg->regs + HPRT0);
+
 		dev_vdbg(hsotg->dev,
 			 "--Port Interrupt HPRT0=0x%08x Port Connect Detected--\n",
 			 hprt0);
-		if (hsotg->lx_state != DWC2_L0)
-			usb_hcd_resume_root_hub(hsotg->priv);
-
-		hsotg->flags.b.port_connect_status_change = 1;
-		hsotg->flags.b.port_connect_status = 1;
-		hprt0_modify |= HPRT0_CONNDET;
+		dwc2_hcd_connect(hsotg);
 
 		/*
 		 * The Hub driver asserts a reset when it sees port connect
@@ -368,27 +366,36 @@
 	 * Clear if detected - Set internal flag if disabled
 	 */
 	if (hprt0 & HPRT0_ENACHG) {
+		dwc2_writel(hprt0_modify | HPRT0_ENACHG, hsotg->regs + HPRT0);
 		dev_vdbg(hsotg->dev,
 			 "  --Port Interrupt HPRT0=0x%08x Port Enable Changed (now %d)--\n",
 			 hprt0, !!(hprt0 & HPRT0_ENA));
-		hprt0_modify |= HPRT0_ENACHG;
-		if (hprt0 & HPRT0_ENA)
+		if (hprt0 & HPRT0_ENA) {
+			hsotg->new_connection = true;
 			dwc2_hprt0_enable(hsotg, hprt0, &hprt0_modify);
-		else
+		} else {
 			hsotg->flags.b.port_enable_change = 1;
+			if (hsotg->core_params->dma_desc_fs_enable) {
+				u32 hcfg;
+
+				hsotg->core_params->dma_desc_enable = 0;
+				hsotg->new_connection = false;
+				hcfg = dwc2_readl(hsotg->regs + HCFG);
+				hcfg &= ~HCFG_DESCDMA;
+				dwc2_writel(hcfg, hsotg->regs + HCFG);
+			}
+		}
 	}
 
 	/* Overcurrent Change Interrupt */
 	if (hprt0 & HPRT0_OVRCURRCHG) {
+		dwc2_writel(hprt0_modify | HPRT0_OVRCURRCHG,
+			    hsotg->regs + HPRT0);
 		dev_vdbg(hsotg->dev,
 			 "  --Port Interrupt HPRT0=0x%08x Port Overcurrent Changed--\n",
 			 hprt0);
 		hsotg->flags.b.port_over_current_change = 1;
-		hprt0_modify |= HPRT0_OVRCURRCHG;
 	}
-
-	/* Clear Port Interrupts */
-	dwc2_writel(hprt0_modify, hsotg->regs + HPRT0);
 }
 
 /*
diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c
index 7d8d06c..27d402f 100644
--- a/drivers/usb/dwc2/hcd_queue.c
+++ b/drivers/usb/dwc2/hcd_queue.c
@@ -232,7 +232,7 @@
  */
 void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
 {
-	if (hsotg->core_params->dma_desc_enable > 0) {
+	if (qh->desc_list) {
 		dwc2_hcd_qh_free_ddma(hsotg, qh);
 	} else {
 		/* kfree(NULL) is safe */
diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h
index 553f246..281b57b 100644
--- a/drivers/usb/dwc2/hw.h
+++ b/drivers/usb/dwc2/hw.h
@@ -769,10 +769,6 @@
 #define TSIZ_XFERSIZE_SHIFT		0
 
 #define HCDMA(_ch)			HSOTG_REG(0x0514 + 0x20 * (_ch))
-#define HCDMA_DMA_ADDR_MASK		(0x1fffff << 11)
-#define HCDMA_DMA_ADDR_SHIFT		11
-#define HCDMA_CTD_MASK			(0xff << 3)
-#define HCDMA_CTD_SHIFT			3
 
 #define HCDMAB(_ch)			HSOTG_REG(0x051c + 0x20 * (_ch))
 
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 39c1cbf..510f787 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -54,11 +54,44 @@
 
 static const char dwc2_driver_name[] = "dwc2";
 
+static const struct dwc2_core_params params_hi6220 = {
+	.otg_cap			= 2,	/* No HNP/SRP capable */
+	.otg_ver			= 0,	/* 1.3 */
+	.dma_enable			= 1,
+	.dma_desc_enable		= 0,
+	.dma_desc_fs_enable		= 0,
+	.speed				= 0,	/* High Speed */
+	.enable_dynamic_fifo		= 1,
+	.en_multiple_tx_fifo		= 1,
+	.host_rx_fifo_size		= 512,
+	.host_nperio_tx_fifo_size	= 512,
+	.host_perio_tx_fifo_size	= 512,
+	.max_transfer_size		= 65535,
+	.max_packet_count		= 511,
+	.host_channels			= 16,
+	.phy_type			= 1,	/* UTMI */
+	.phy_utmi_width			= 8,
+	.phy_ulpi_ddr			= 0,	/* Single */
+	.phy_ulpi_ext_vbus		= 0,
+	.i2c_enable			= 0,
+	.ulpi_fs_ls			= 0,
+	.host_support_fs_ls_low_power	= 0,
+	.host_ls_low_power_phy_clk	= 0,	/* 48 MHz */
+	.ts_dline			= 0,
+	.reload_ctl			= 0,
+	.ahbcfg				= GAHBCFG_HBSTLEN_INCR16 <<
+					  GAHBCFG_HBSTLEN_SHIFT,
+	.uframe_sched			= 0,
+	.external_id_pin_ctl		= -1,
+	.hibernation			= -1,
+};
+
 static const struct dwc2_core_params params_bcm2835 = {
 	.otg_cap			= 0,	/* HNP/SRP capable */
 	.otg_ver			= 0,	/* 1.3 */
 	.dma_enable			= 1,
 	.dma_desc_enable		= 0,
+	.dma_desc_fs_enable		= 0,
 	.speed				= 0,	/* High Speed */
 	.enable_dynamic_fifo		= 1,
 	.en_multiple_tx_fifo		= 1,
@@ -89,6 +122,7 @@
 	.otg_ver			= -1,
 	.dma_enable			= -1,
 	.dma_desc_enable		= 0,
+	.dma_desc_fs_enable		= 0,
 	.speed				= -1,
 	.enable_dynamic_fifo		= 1,
 	.en_multiple_tx_fifo		= -1,
@@ -115,6 +149,71 @@
 	.hibernation			= -1,
 };
 
+/*
+ * Check the dr_mode against the module configuration and hardware
+ * capabilities.
+ *
+ * The hardware, module, and dr_mode, can each be set to host, device,
+ * or otg. Check that all these values are compatible and adjust the
+ * value of dr_mode if possible.
+ *
+ *                      actual
+ *    HW  MOD dr_mode   dr_mode
+ *  ------------------------------
+ *   HST  HST  any    :  HST
+ *   HST  DEV  any    :  ---
+ *   HST  OTG  any    :  HST
+ *
+ *   DEV  HST  any    :  ---
+ *   DEV  DEV  any    :  DEV
+ *   DEV  OTG  any    :  DEV
+ *
+ *   OTG  HST  any    :  HST
+ *   OTG  DEV  any    :  DEV
+ *   OTG  OTG  any    :  dr_mode
+ */
+static int dwc2_get_dr_mode(struct dwc2_hsotg *hsotg)
+{
+	enum usb_dr_mode mode;
+
+	hsotg->dr_mode = usb_get_dr_mode(hsotg->dev);
+	if (hsotg->dr_mode == USB_DR_MODE_UNKNOWN)
+		hsotg->dr_mode = USB_DR_MODE_OTG;
+
+	mode = hsotg->dr_mode;
+
+	if (dwc2_hw_is_device(hsotg)) {
+		if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) {
+			dev_err(hsotg->dev,
+				"Controller does not support host mode.\n");
+			return -EINVAL;
+		}
+		mode = USB_DR_MODE_PERIPHERAL;
+	} else if (dwc2_hw_is_host(hsotg)) {
+		if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) {
+			dev_err(hsotg->dev,
+				"Controller does not support device mode.\n");
+			return -EINVAL;
+		}
+		mode = USB_DR_MODE_HOST;
+	} else {
+		if (IS_ENABLED(CONFIG_USB_DWC2_HOST))
+			mode = USB_DR_MODE_HOST;
+		else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL))
+			mode = USB_DR_MODE_PERIPHERAL;
+	}
+
+	if (mode != hsotg->dr_mode) {
+		dev_warn(hsotg->dev,
+			"Configuration mismatch. dr_mode forced to %s\n",
+			mode == USB_DR_MODE_HOST ? "host" : "device");
+
+		hsotg->dr_mode = mode;
+	}
+
+	return 0;
+}
+
 static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
 {
 	struct platform_device *pdev = to_platform_device(hsotg->dev);
@@ -306,8 +405,28 @@
 	return 0;
 }
 
+/**
+ * dwc2_driver_shutdown() - Called on device shutdown
+ *
+ * @dev: Platform device
+ *
+ * In specific conditions (involving usb hubs) dwc2 devices can create a
+ * lot of interrupts, even to the point of overwhelming devices running
+ * at low frequencies. Some devices need to do special clock handling
+ * at shutdown-time which may bring the system clock below the threshold
+ * of being able to handle the dwc2 interrupts. Disabling dwc2-irqs
+ * prevents reboots/poweroffs from getting stuck in such cases.
+ */
+static void dwc2_driver_shutdown(struct platform_device *dev)
+{
+	struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
+
+	disable_irq(hsotg->irq);
+}
+
 static const struct of_device_id dwc2_of_match_table[] = {
 	{ .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
+	{ .compatible = "hisilicon,hi6220-usb", .data = &params_hi6220 },
 	{ .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
 	{ .compatible = "snps,dwc2", .data = NULL },
 	{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
@@ -335,7 +454,6 @@
 	struct dwc2_hsotg *hsotg;
 	struct resource *res;
 	int retval;
-	int irq;
 
 	match = of_match_device(dwc2_of_match_table, &dev->dev);
 	if (match && match->data) {
@@ -348,8 +466,10 @@
 		/*
 		 * Disable descriptor dma mode by default as the HW can support
 		 * it, but does not support it for SPLIT transactions.
+		 * Disable it for FS devices as well.
 		 */
 		defparams.dma_desc_enable = 0;
+		defparams.dma_desc_fs_enable = 0;
 	}
 
 	hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
@@ -375,19 +495,6 @@
 	dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
 		(unsigned long)res->start, hsotg->regs);
 
-	hsotg->dr_mode = usb_get_dr_mode(&dev->dev);
-	if (IS_ENABLED(CONFIG_USB_DWC2_HOST) &&
-			hsotg->dr_mode != USB_DR_MODE_HOST) {
-		hsotg->dr_mode = USB_DR_MODE_HOST;
-		dev_warn(hsotg->dev,
-			"Configuration mismatch. Forcing host mode\n");
-	} else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) &&
-			hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
-		hsotg->dr_mode = USB_DR_MODE_PERIPHERAL;
-		dev_warn(hsotg->dev,
-			"Configuration mismatch. Forcing peripheral mode\n");
-	}
-
 	retval = dwc2_lowlevel_hw_init(hsotg);
 	if (retval)
 		return retval;
@@ -401,15 +508,15 @@
 
 	dwc2_set_all_params(hsotg->core_params, -1);
 
-	irq = platform_get_irq(dev, 0);
-	if (irq < 0) {
+	hsotg->irq = platform_get_irq(dev, 0);
+	if (hsotg->irq < 0) {
 		dev_err(&dev->dev, "missing IRQ resource\n");
-		return irq;
+		return hsotg->irq;
 	}
 
 	dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
-		irq);
-	retval = devm_request_irq(hsotg->dev, irq,
+		hsotg->irq);
+	retval = devm_request_irq(hsotg->dev, hsotg->irq,
 				  dwc2_handle_common_intr, IRQF_SHARED,
 				  dev_name(hsotg->dev), hsotg);
 	if (retval)
@@ -419,7 +526,11 @@
 	if (retval)
 		return retval;
 
-	/* Detect config values from hardware */
+	retval = dwc2_get_dr_mode(hsotg);
+	if (retval)
+		return retval;
+
+	/* Reset the controller and detect hardware config values */
 	retval = dwc2_get_hwparams(hsotg);
 	if (retval)
 		goto error;
@@ -427,15 +538,17 @@
 	/* Validate parameter values */
 	dwc2_set_parameters(hsotg, params);
 
+	dwc2_force_dr_mode(hsotg);
+
 	if (hsotg->dr_mode != USB_DR_MODE_HOST) {
-		retval = dwc2_gadget_init(hsotg, irq);
+		retval = dwc2_gadget_init(hsotg, hsotg->irq);
 		if (retval)
 			goto error;
 		hsotg->gadget_enabled = 1;
 	}
 
 	if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
-		retval = dwc2_hcd_init(hsotg, irq);
+		retval = dwc2_hcd_init(hsotg, hsotg->irq);
 		if (retval) {
 			if (hsotg->gadget_enabled)
 				dwc2_hsotg_remove(hsotg);
@@ -502,6 +615,7 @@
 	},
 	.probe = dwc2_driver_probe,
 	.remove = dwc2_driver_remove,
+	.shutdown = dwc2_driver_shutdown,
 };
 
 module_platform_driver(dwc2_platform_driver);
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 5a42c45..a64ce1c 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -87,6 +87,15 @@
 	  Support of USB2/3 functionality in TI Keystone2 platforms.
 	  Say 'Y' or 'M' here if you have one such device
 
+config USB_DWC3_OF_SIMPLE
+       tristate "Generic OF Simple Glue Layer"
+       depends on OF && COMMON_CLK
+       default USB_DWC3
+       help
+         Support USB2/3 functionality in simple SoC integrations.
+	 Currently supports Xilinx and Qualcomm DWC USB3 IP.
+	 Say 'Y' or 'M' if you have one such device.
+
 config USB_DWC3_ST
 	tristate "STMicroelectronics Platforms"
 	depends on ARCH_STI && OF
@@ -96,12 +105,4 @@
 	  inside (i.e. STiH407).
 	  Say 'Y' or 'M' if you have one such device.
 
-config USB_DWC3_QCOM
-	tristate "Qualcomm Platforms"
-	depends on ARCH_QCOM || COMPILE_TEST
-	default USB_DWC3
-	help
-	  Recent Qualcomm SoCs ship with one DesignWare Core USB3 IP inside,
-	  say 'Y' or 'M' if you have one such device.
-
 endif
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
index acc951d..22420e17 100644
--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@@ -37,5 +37,5 @@
 obj-$(CONFIG_USB_DWC3_EXYNOS)		+= dwc3-exynos.o
 obj-$(CONFIG_USB_DWC3_PCI)		+= dwc3-pci.o
 obj-$(CONFIG_USB_DWC3_KEYSTONE)		+= dwc3-keystone.o
-obj-$(CONFIG_USB_DWC3_QCOM)		+= dwc3-qcom.o
+obj-$(CONFIG_USB_DWC3_OF_SIMPLE)	+= dwc3-of-simple.o
 obj-$(CONFIG_USB_DWC3_ST)		+= dwc3-st.o
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 22b47973..de5e01f 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -272,7 +272,8 @@
 
 	for (n = 0; n < dwc->num_event_buffers; n++) {
 		evt = dwc->ev_buffs[n];
-		dev_dbg(dwc->dev, "Event buf %p dma %08llx length %d\n",
+		dwc3_trace(trace_dwc3_core,
+				"Event buf %p dma %08llx length %d\n",
 				evt->buf, (unsigned long long) evt->dma,
 				evt->length);
 
@@ -608,12 +609,13 @@
 		reg |= DWC3_GCTL_GBLHIBERNATIONEN;
 		break;
 	default:
-		dev_dbg(dwc->dev, "No power optimization available\n");
+		dwc3_trace(trace_dwc3_core, "No power optimization available\n");
 	}
 
 	/* check if current dwc3 is on simulation board */
 	if (dwc->hwparams.hwparams6 & DWC3_GHWPARAMS6_EN_FPGA) {
-		dev_dbg(dwc->dev, "it is on FPGA board\n");
+		dwc3_trace(trace_dwc3_core,
+				"running on FPGA platform\n");
 		dwc->is_fpga = true;
 	}
 
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 36f1cb7..2913068 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -37,6 +37,7 @@
 #define DWC3_MSG_MAX	500
 
 /* Global constants */
+#define DWC3_ZLP_BUF_SIZE	1024	/* size of a superspeed bulk */
 #define DWC3_EP0_BOUNCE_SIZE	512
 #define DWC3_ENDPOINTS_NUM	32
 #define DWC3_XHCI_RESOURCES_NUM	2
@@ -647,6 +648,7 @@
  * @ctrl_req: usb control request which is used for ep0
  * @ep0_trb: trb which is used for the ctrl_req
  * @ep0_bounce: bounce buffer for ep0
+ * @zlp_buf: used when request->zero is set
  * @setup_buf: used while precessing STD USB requests
  * @ctrl_req_addr: dma address of ctrl_req
  * @ep0_trb: dma address of ep0_trb
@@ -734,6 +736,7 @@
 	struct usb_ctrlrequest	*ctrl_req;
 	struct dwc3_trb		*ep0_trb;
 	void			*ep0_bounce;
+	void			*zlp_buf;
 	void			*scratchbuf;
 	u8			*setup_buf;
 	dma_addr_t		ctrl_req_addr;
diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
new file mode 100644
index 0000000..9c9f741
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -0,0 +1,180 @@
+/**
+ * dwc3-of-simple.c - OF glue layer for simple integrations
+ *
+ * Copyright (c) 2015 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Felipe Balbi <balbi@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This is a combination of the old dwc3-qcom.c by Ivan T. Ivanov
+ * <iivanov@mm-sol.com> and the original patch adding support for Xilinx' SoC
+ * by Subbaraya Sundeep Bhatta <subbaraya.sundeep.bhatta@xilinx.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
+
+struct dwc3_of_simple {
+	struct device		*dev;
+	struct clk		**clks;
+	int			num_clocks;
+};
+
+static int dwc3_of_simple_probe(struct platform_device *pdev)
+{
+	struct dwc3_of_simple	*simple;
+	struct device		*dev = &pdev->dev;
+	struct device_node	*np = dev->of_node;
+
+	int			ret;
+	int			i;
+
+	simple = devm_kzalloc(dev, sizeof(*simple), GFP_KERNEL);
+	if (!simple)
+		return -ENOMEM;
+
+	ret = of_clk_get_parent_count(np);
+	if (ret < 0)
+		return ret;
+
+	simple->num_clocks = ret;
+
+	simple->clks = devm_kcalloc(dev, simple->num_clocks,
+			sizeof(struct clk *), GFP_KERNEL);
+	if (!simple->clks)
+		return -ENOMEM;
+
+	simple->dev = dev;
+
+	for (i = 0; i < simple->num_clocks; i++) {
+		struct clk	*clk;
+
+		clk = of_clk_get(np, i);
+		if (IS_ERR(clk)) {
+			while (--i >= 0)
+				clk_put(simple->clks[i]);
+			return PTR_ERR(clk);
+		}
+
+		ret = clk_prepare_enable(clk);
+		if (ret < 0) {
+			while (--i >= 0) {
+				clk_disable_unprepare(simple->clks[i]);
+				clk_put(simple->clks[i]);
+			}
+			clk_put(clk);
+
+			return ret;
+		}
+
+		simple->clks[i] = clk;
+	}
+
+	ret = of_platform_populate(np, NULL, NULL, dev);
+	if (ret) {
+		for (i = 0; i < simple->num_clocks; i++) {
+			clk_disable_unprepare(simple->clks[i]);
+			clk_put(simple->clks[i]);
+		}
+
+		return ret;
+	}
+
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
+
+	return 0;
+}
+
+static int dwc3_of_simple_remove(struct platform_device *pdev)
+{
+	struct dwc3_of_simple	*simple = platform_get_drvdata(pdev);
+	struct device		*dev = &pdev->dev;
+	int			i;
+
+	for (i = 0; i < simple->num_clocks; i++) {
+		clk_unprepare(simple->clks[i]);
+		clk_put(simple->clks[i]);
+	}
+
+	of_platform_depopulate(dev);
+
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int dwc3_of_simple_runtime_suspend(struct device *dev)
+{
+	struct dwc3_of_simple	*simple = dev_get_drvdata(dev);
+	int			i;
+
+	for (i = 0; i < simple->num_clocks; i++)
+		clk_disable(simple->clks[i]);
+
+	return 0;
+}
+
+static int dwc3_of_simple_runtime_resume(struct device *dev)
+{
+	struct dwc3_of_simple	*simple = dev_get_drvdata(dev);
+	int			ret;
+	int			i;
+
+	for (i = 0; i < simple->num_clocks; i++) {
+		ret = clk_enable(simple->clks[i]);
+		if (ret < 0) {
+			while (--i >= 0)
+				clk_disable(simple->clks[i]);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops dwc3_of_simple_dev_pm_ops = {
+	SET_RUNTIME_PM_OPS(dwc3_of_simple_runtime_suspend,
+			dwc3_of_simple_runtime_resume, NULL)
+};
+
+static const struct of_device_id of_dwc3_simple_match[] = {
+	{ .compatible = "qcom,dwc3" },
+	{ .compatible = "xlnx,zynqmp-dwc3" },
+	{ /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_dwc3_simple_match);
+
+static struct platform_driver dwc3_of_simple_driver = {
+	.probe		= dwc3_of_simple_probe,
+	.remove		= dwc3_of_simple_remove,
+	.driver		= {
+		.name	= "dwc3-of-simple",
+		.of_match_table = of_dwc3_simple_match,
+	},
+};
+
+module_platform_driver(dwc3_of_simple_driver);
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DesignWare USB3 OF Simple Glue Layer");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
deleted file mode 100644
index 0880260..0000000
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/* Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-
-struct dwc3_qcom {
-	struct device		*dev;
-
-	struct clk		*core_clk;
-	struct clk		*iface_clk;
-	struct clk		*sleep_clk;
-};
-
-static int dwc3_qcom_probe(struct platform_device *pdev)
-{
-	struct device_node *node = pdev->dev.of_node;
-	struct dwc3_qcom *qdwc;
-	int ret;
-
-	qdwc = devm_kzalloc(&pdev->dev, sizeof(*qdwc), GFP_KERNEL);
-	if (!qdwc)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, qdwc);
-
-	qdwc->dev = &pdev->dev;
-
-	qdwc->core_clk = devm_clk_get(qdwc->dev, "core");
-	if (IS_ERR(qdwc->core_clk)) {
-		dev_err(qdwc->dev, "failed to get core clock\n");
-		return PTR_ERR(qdwc->core_clk);
-	}
-
-	qdwc->iface_clk = devm_clk_get(qdwc->dev, "iface");
-	if (IS_ERR(qdwc->iface_clk)) {
-		dev_info(qdwc->dev, "failed to get optional iface clock\n");
-		qdwc->iface_clk = NULL;
-	}
-
-	qdwc->sleep_clk = devm_clk_get(qdwc->dev, "sleep");
-	if (IS_ERR(qdwc->sleep_clk)) {
-		dev_info(qdwc->dev, "failed to get optional sleep clock\n");
-		qdwc->sleep_clk = NULL;
-	}
-
-	ret = clk_prepare_enable(qdwc->core_clk);
-	if (ret) {
-		dev_err(qdwc->dev, "failed to enable core clock\n");
-		goto err_core;
-	}
-
-	ret = clk_prepare_enable(qdwc->iface_clk);
-	if (ret) {
-		dev_err(qdwc->dev, "failed to enable optional iface clock\n");
-		goto err_iface;
-	}
-
-	ret = clk_prepare_enable(qdwc->sleep_clk);
-	if (ret) {
-		dev_err(qdwc->dev, "failed to enable optional sleep clock\n");
-		goto err_sleep;
-	}
-
-	ret = of_platform_populate(node, NULL, NULL, qdwc->dev);
-	if (ret) {
-		dev_err(qdwc->dev, "failed to register core - %d\n", ret);
-		goto err_clks;
-	}
-
-	return 0;
-
-err_clks:
-	clk_disable_unprepare(qdwc->sleep_clk);
-err_sleep:
-	clk_disable_unprepare(qdwc->iface_clk);
-err_iface:
-	clk_disable_unprepare(qdwc->core_clk);
-err_core:
-	return ret;
-}
-
-static int dwc3_qcom_remove(struct platform_device *pdev)
-{
-	struct dwc3_qcom *qdwc = platform_get_drvdata(pdev);
-
-	of_platform_depopulate(&pdev->dev);
-
-	clk_disable_unprepare(qdwc->sleep_clk);
-	clk_disable_unprepare(qdwc->iface_clk);
-	clk_disable_unprepare(qdwc->core_clk);
-
-	return 0;
-}
-
-static const struct of_device_id of_dwc3_match[] = {
-	{ .compatible = "qcom,dwc3" },
-	{ /* Sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, of_dwc3_match);
-
-static struct platform_driver dwc3_qcom_driver = {
-	.probe		= dwc3_qcom_probe,
-	.remove		= dwc3_qcom_remove,
-	.driver		= {
-		.name	= "qcom-dwc3",
-		.of_match_table	= of_dwc3_match,
-	},
-};
-
-module_platform_driver(dwc3_qcom_driver);
-
-MODULE_ALIAS("platform:qcom-dwc3");
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("DesignWare USB3 QCOM Glue Layer");
-MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 5320e93..3a9354a 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -817,6 +817,8 @@
 
 	status = DWC3_TRB_SIZE_TRBSTS(trb->size);
 	if (status == DWC3_TRBSTS_SETUP_PENDING) {
+		dwc->setup_packet_pending = true;
+
 		dwc3_trace(trace_dwc3_ep0, "Setup Pending received");
 
 		if (r)
@@ -916,8 +918,10 @@
 	}
 
 	status = DWC3_TRB_SIZE_TRBSTS(trb->size);
-	if (status == DWC3_TRBSTS_SETUP_PENDING)
+	if (status == DWC3_TRBSTS_SETUP_PENDING) {
+		dwc->setup_packet_pending = true;
 		dwc3_trace(trace_dwc3_ep0, "Setup Pending received");
+	}
 
 	dwc->ep0state = EP0_SETUP_PHASE;
 	dwc3_ep0_out_start(dwc);
@@ -971,7 +975,7 @@
 		ret = usb_gadget_map_request(&dwc->gadget, &req->request,
 				dep->number);
 		if (ret) {
-			dev_dbg(dwc->dev, "failed to map request\n");
+			dwc3_trace(trace_dwc3_ep0, "failed to map request\n");
 			return;
 		}
 
@@ -999,7 +1003,7 @@
 		ret = usb_gadget_map_request(&dwc->gadget, &req->request,
 				dep->number);
 		if (ret) {
-			dev_dbg(dwc->dev, "failed to map request\n");
+			dwc3_trace(trace_dwc3_ep0, "failed to map request\n");
 			return;
 		}
 
@@ -1063,8 +1067,6 @@
 static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
 		const struct dwc3_event_depevt *event)
 {
-	dwc->setup_packet_pending = true;
-
 	switch (event->status) {
 	case DEPEVT_STATUS_CONTROL_DATA:
 		dwc3_trace(trace_dwc3_ep0, "Control Data");
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index a58376f..af023a8 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -265,9 +265,6 @@
 		usb_gadget_unmap_request(&dwc->gadget, &req->request,
 				req->direction);
 
-	dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n",
-			req, dep->name, req->request.actual,
-			req->request.length, status);
 	trace_dwc3_gadget_giveback(req);
 
 	spin_unlock(&dwc->lock);
@@ -664,11 +661,10 @@
 	dep = to_dwc3_ep(ep);
 	dwc = dep->dwc;
 
-	if (dep->flags & DWC3_EP_ENABLED) {
-		dev_WARN_ONCE(dwc->dev, true, "%s is already enabled\n",
-				dep->name);
+	if (dev_WARN_ONCE(dwc->dev, dep->flags & DWC3_EP_ENABLED,
+					"%s is already enabled\n",
+					dep->name))
 		return 0;
-	}
 
 	spin_lock_irqsave(&dwc->lock, flags);
 	ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc, false, false);
@@ -692,11 +688,10 @@
 	dep = to_dwc3_ep(ep);
 	dwc = dep->dwc;
 
-	if (!(dep->flags & DWC3_EP_ENABLED)) {
-		dev_WARN_ONCE(dwc->dev, true, "%s is already disabled\n",
-				dep->name);
+	if (dev_WARN_ONCE(dwc->dev, !(dep->flags & DWC3_EP_ENABLED),
+					"%s is already disabled\n",
+					dep->name))
 		return 0;
-	}
 
 	spin_lock_irqsave(&dwc->lock, flags);
 	ret = __dwc3_gadget_ep_disable(dep);
@@ -985,8 +980,6 @@
 	cmd |= DWC3_DEPCMD_PARAM(cmd_param);
 	ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
 	if (ret < 0) {
-		dev_dbg(dwc->dev, "failed to send STARTTRANSFER command\n");
-
 		/*
 		 * FIXME we need to iterate over the list of requests
 		 * here and stop, unmap, free and del each of the linked
@@ -1044,6 +1037,20 @@
 	struct dwc3		*dwc = dep->dwc;
 	int			ret;
 
+	if (!dep->endpoint.desc) {
+		dwc3_trace(trace_dwc3_gadget,
+				"trying to queue request %p to disabled %s\n",
+				&req->request, dep->endpoint.name);
+		return -ESHUTDOWN;
+	}
+
+	if (WARN(req->dep != dep, "request %p belongs to '%s'\n",
+				&req->request, req->dep->name)) {
+		dwc3_trace(trace_dwc3_gadget, "request %p belongs to '%s'\n",
+				&req->request, req->dep->name);
+		return -EINVAL;
+	}
+
 	req->request.actual	= 0;
 	req->request.status	= -EINPROGRESS;
 	req->direction		= dep->direction;
@@ -1141,7 +1148,8 @@
 
 out:
 	if (ret && ret != -EBUSY)
-		dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
+		dwc3_trace(trace_dwc3_gadget,
+				"%s: failed to kick transfers\n",
 				dep->name);
 	if (ret == -EBUSY)
 		ret = 0;
@@ -1149,6 +1157,32 @@
 	return ret;
 }
 
+static void __dwc3_gadget_ep_zlp_complete(struct usb_ep *ep,
+		struct usb_request *request)
+{
+	dwc3_gadget_ep_free_request(ep, request);
+}
+
+static int __dwc3_gadget_ep_queue_zlp(struct dwc3 *dwc, struct dwc3_ep *dep)
+{
+	struct dwc3_request		*req;
+	struct usb_request		*request;
+	struct usb_ep			*ep = &dep->endpoint;
+
+	dwc3_trace(trace_dwc3_gadget, "queueing ZLP\n");
+	request = dwc3_gadget_ep_alloc_request(ep, GFP_ATOMIC);
+	if (!request)
+		return -ENOMEM;
+
+	request->length = 0;
+	request->buf = dwc->zlp_buf;
+	request->complete = __dwc3_gadget_ep_zlp_complete;
+
+	req = to_dwc3_request(request);
+
+	return __dwc3_gadget_ep_queue(dep, req);
+}
+
 static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
 	gfp_t gfp_flags)
 {
@@ -1161,22 +1195,18 @@
 	int				ret;
 
 	spin_lock_irqsave(&dwc->lock, flags);
-	if (!dep->endpoint.desc) {
-		dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n",
-				request, ep->name);
-		ret = -ESHUTDOWN;
-		goto out;
-	}
-
-	if (WARN(req->dep != dep, "request %p belongs to '%s'\n",
-				request, req->dep->name)) {
-		ret = -EINVAL;
-		goto out;
-	}
-
 	ret = __dwc3_gadget_ep_queue(dep, req);
 
-out:
+	/*
+	 * Okay, here's the thing, if gadget driver has requested for a ZLP by
+	 * setting request->zero, instead of doing magic, we will just queue an
+	 * extra usb_request ourselves so that it gets handled the same way as
+	 * any other request.
+	 */
+	if (ret == 0 && request->zero && request->length &&
+	    (request->length % ep->maxpacket == 0))
+		ret = __dwc3_gadget_ep_queue_zlp(dwc, dep);
+
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	return ret;
@@ -1246,7 +1276,8 @@
 		if (!protocol && ((dep->direction && dep->flags & DWC3_EP_BUSY) ||
 				(!list_empty(&dep->req_queued) ||
 				 !list_empty(&dep->request_list)))) {
-			dev_dbg(dwc->dev, "%s: pending request, cannot halt\n",
+			dwc3_trace(trace_dwc3_gadget,
+					"%s: pending request, cannot halt\n",
 					dep->name);
 			return -EAGAIN;
 		}
@@ -1373,7 +1404,7 @@
 
 	speed = reg & DWC3_DSTS_CONNECTSPD;
 	if (speed == DWC3_DSTS_SUPERSPEED) {
-		dev_dbg(dwc->dev, "no wakeup on SuperSpeed\n");
+		dwc3_trace(trace_dwc3_gadget, "no wakeup on SuperSpeed\n");
 		ret = -EINVAL;
 		goto out;
 	}
@@ -1385,8 +1416,9 @@
 	case DWC3_LINK_STATE_U3:	/* in HS, means SUSPEND */
 		break;
 	default:
-		dev_dbg(dwc->dev, "can't wakeup from link state %d\n",
-				link_state);
+		dwc3_trace(trace_dwc3_gadget,
+				"can't wakeup from '%s'\n",
+				dwc3_gadget_link_string(link_state));
 		ret = -EINVAL;
 		goto out;
 	}
@@ -1825,7 +1857,8 @@
 		if (count) {
 			trb_status = DWC3_TRB_SIZE_TRBSTS(trb->size);
 			if (trb_status == DWC3_TRBSTS_MISSED_ISOC) {
-				dev_dbg(dwc->dev, "incomplete IN transfer %s\n",
+				dwc3_trace(trace_dwc3_gadget,
+						"%s: incomplete IN transfer\n",
 						dep->name);
 				/*
 				 * If missed isoc occurred and there is
@@ -1887,10 +1920,9 @@
 
 	do {
 		req = next_request(&dep->req_queued);
-		if (!req) {
-			WARN_ON_ONCE(1);
+		if (WARN_ON_ONCE(!req))
 			return 1;
-		}
+
 		i = 0;
 		do {
 			slot = req->start_slot + i;
@@ -2004,7 +2036,8 @@
 		dep->resource_index = 0;
 
 		if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
-			dev_dbg(dwc->dev, "%s is an Isochronous endpoint\n",
+			dwc3_trace(trace_dwc3_gadget,
+					"%s is an Isochronous endpoint\n",
 					dep->name);
 			return;
 		}
@@ -2031,7 +2064,8 @@
 			if (!ret || ret == -EBUSY)
 				return;
 
-			dev_dbg(dwc->dev, "%s: failed to kick transfers\n",
+			dwc3_trace(trace_dwc3_gadget,
+					"%s: failed to kick transfers\n",
 					dep->name);
 		}
 
@@ -2053,11 +2087,12 @@
 		case DEPEVT_STREAMEVT_NOTFOUND:
 			/* FALLTHROUGH */
 		default:
-			dev_dbg(dwc->dev, "Couldn't find suitable stream\n");
+			dwc3_trace(trace_dwc3_gadget,
+					"unable to find suitable stream\n");
 		}
 		break;
 	case DWC3_DEPEVT_RXTXFIFOEVT:
-		dev_dbg(dwc->dev, "%s FIFO Overrun\n", dep->name);
+		dwc3_trace(trace_dwc3_gadget, "%s FIFO Overrun\n", dep->name);
 		break;
 	case DWC3_DEPEVT_EPCMDCMPLT:
 		dwc3_trace(trace_dwc3_gadget, "Endpoint Command Complete");
@@ -2230,8 +2265,8 @@
 	 *
 	 * Our suggested workaround is to follow the Disconnect
 	 * Event steps here, instead, based on a setup_packet_pending
-	 * flag. Such flag gets set whenever we have a XferNotReady
-	 * event on EP0 and gets cleared on XferComplete for the
+	 * flag. Such flag gets set whenever we have a SETUP_PENDING
+	 * status for EP0 TRBs and gets cleared on XferComplete for the
 	 * same endpoint.
 	 *
 	 * Refers to:
@@ -2744,6 +2779,12 @@
 		goto err3;
 	}
 
+	dwc->zlp_buf = kzalloc(DWC3_ZLP_BUF_SIZE, GFP_KERNEL);
+	if (!dwc->zlp_buf) {
+		ret = -ENOMEM;
+		goto err4;
+	}
+
 	dwc->gadget.ops			= &dwc3_gadget_ops;
 	dwc->gadget.speed		= USB_SPEED_UNKNOWN;
 	dwc->gadget.sg_supported	= true;
@@ -2785,16 +2826,19 @@
 
 	ret = dwc3_gadget_init_endpoints(dwc);
 	if (ret)
-		goto err4;
+		goto err5;
 
 	ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget);
 	if (ret) {
 		dev_err(dwc->dev, "failed to register udc\n");
-		goto err4;
+		goto err5;
 	}
 
 	return 0;
 
+err5:
+	kfree(dwc->zlp_buf);
+
 err4:
 	dwc3_gadget_free_endpoints(dwc);
 	dma_free_coherent(dwc->dev, DWC3_EP0_BOUNCE_SIZE,
@@ -2827,6 +2871,7 @@
 			dwc->ep0_bounce, dwc->ep0_bounce_addr);
 
 	kfree(dwc->setup_buf);
+	kfree(dwc->zlp_buf);
 
 	dma_free_coherent(dwc->dev, sizeof(*dwc->ep0_trb),
 			dwc->ep0_trb, dwc->ep0_trb_addr);
diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h
index 9c10669..3ac7252 100644
--- a/drivers/usb/dwc3/trace.h
+++ b/drivers/usb/dwc3/trace.h
@@ -117,6 +117,9 @@
 		__field(unsigned, actual)
 		__field(unsigned, length)
 		__field(int, status)
+		__field(int, zero)
+		__field(int, short_not_ok)
+		__field(int, no_interrupt)
 	),
 	TP_fast_assign(
 		snprintf(__get_str(name), DWC3_MSG_MAX, "%s", req->dep->name);
@@ -124,9 +127,15 @@
 		__entry->actual = req->request.actual;
 		__entry->length = req->request.length;
 		__entry->status = req->request.status;
+		__entry->zero = req->request.zero;
+		__entry->short_not_ok = req->request.short_not_ok;
+		__entry->no_interrupt = req->request.no_interrupt;
 	),
-	TP_printk("%s: req %p length %u/%u ==> %d",
+	TP_printk("%s: req %p length %u/%u %s%s%s ==> %d",
 		__get_str(name), __entry->req, __entry->actual, __entry->length,
+		__entry->zero ? "Z" : "z",
+		__entry->short_not_ok ? "S" : "s",
+		__entry->no_interrupt ? "i" : "I",
 		__entry->status
 	)
 );
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 33834aa..be5aab9 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -127,6 +127,12 @@
 	   a module parameter as well.
 	   If unsure, say 2.
 
+config U_SERIAL_CONSOLE
+	bool "Serial gadget console support"
+	depends on USB_G_SERIAL
+	help
+	   It supports the serial gadget can be used as a console.
+
 source "drivers/usb/gadget/udc/Kconfig"
 
 #
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index 163d305..590c449 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -56,7 +56,6 @@
 	struct list_head string_list;
 	struct list_head available_func;
 
-	const char *udc_name;
 	struct usb_composite_driver composite;
 	struct usb_composite_dev cdev;
 	bool use_os_desc;
@@ -233,21 +232,23 @@
 
 static ssize_t gadget_dev_desc_UDC_show(struct config_item *item, char *page)
 {
-	return sprintf(page, "%s\n", to_gadget_info(item)->udc_name ?: "");
+	char *udc_name = to_gadget_info(item)->composite.gadget_driver.udc_name;
+
+	return sprintf(page, "%s\n", udc_name ?: "");
 }
 
 static int unregister_gadget(struct gadget_info *gi)
 {
 	int ret;
 
-	if (!gi->udc_name)
+	if (!gi->composite.gadget_driver.udc_name)
 		return -ENODEV;
 
 	ret = usb_gadget_unregister_driver(&gi->composite.gadget_driver);
 	if (ret)
 		return ret;
-	kfree(gi->udc_name);
-	gi->udc_name = NULL;
+	kfree(gi->composite.gadget_driver.udc_name);
+	gi->composite.gadget_driver.udc_name = NULL;
 	return 0;
 }
 
@@ -271,14 +272,16 @@
 		if (ret)
 			goto err;
 	} else {
-		if (gi->udc_name) {
+		if (gi->composite.gadget_driver.udc_name) {
 			ret = -EBUSY;
 			goto err;
 		}
-		ret = usb_udc_attach_driver(name, &gi->composite.gadget_driver);
-		if (ret)
+		gi->composite.gadget_driver.udc_name = name;
+		ret = usb_gadget_probe_driver(&gi->composite.gadget_driver);
+		if (ret) {
+			gi->composite.gadget_driver.udc_name = NULL;
 			goto err;
-		gi->udc_name = name;
+		}
 	}
 	mutex_unlock(&gi->lock);
 	return len;
@@ -427,9 +430,9 @@
 	 * remove the function.
 	 */
 	mutex_lock(&gi->lock);
-	if (gi->udc_name)
+	if (gi->composite.gadget_driver.udc_name)
 		unregister_gadget(gi);
-	WARN_ON(gi->udc_name);
+	WARN_ON(gi->composite.gadget_driver.udc_name);
 
 	list_for_each_entry(f, &cfg->func_list, list) {
 		if (f->fi == fi) {
@@ -873,10 +876,10 @@
 	struct usb_composite_dev *cdev = &gi->cdev;
 
 	mutex_lock(&gi->lock);
-	if (gi->udc_name)
+	if (gi->composite.gadget_driver.udc_name)
 		unregister_gadget(gi);
 	cdev->os_desc_config = NULL;
-	WARN_ON(gi->udc_name);
+	WARN_ON(gi->composite.gadget_driver.udc_name);
 	mutex_unlock(&gi->lock);
 	return 0;
 }
diff --git a/drivers/usb/gadget/function/f_midi.c b/drivers/usb/gadget/function/f_midi.c
index 898a570..fb1fe96d 100644
--- a/drivers/usb/gadget/function/f_midi.c
+++ b/drivers/usb/gadget/function/f_midi.c
@@ -23,6 +23,7 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/device.h>
+#include <linux/kfifo.h>
 
 #include <sound/core.h>
 #include <sound/initval.h>
@@ -75,6 +76,7 @@
 	struct usb_ep		*in_ep, *out_ep;
 	struct snd_card		*card;
 	struct snd_rawmidi	*rmidi;
+	u8			ms_id;
 
 	struct snd_rawmidi_substream *in_substream[MAX_PORTS];
 	struct snd_rawmidi_substream *out_substream[MAX_PORTS];
@@ -87,6 +89,9 @@
 	int index;
 	char *id;
 	unsigned int buflen, qlen;
+	/* This fifo is used as a buffer ring for pre-allocated IN usb_requests */
+	DECLARE_KFIFO_PTR(in_req_fifo, struct usb_request *);
+	unsigned int in_last_port;
 };
 
 static inline struct f_midi *func_to_midi(struct usb_function *f)
@@ -94,7 +99,7 @@
 	return container_of(f, struct f_midi, func);
 }
 
-static void f_midi_transmit(struct f_midi *midi, struct usb_request *req);
+static void f_midi_transmit(struct f_midi *midi);
 
 DECLARE_UAC_AC_HEADER_DESCRIPTOR(1);
 DECLARE_USB_MIDI_OUT_JACK_DESCRIPTOR(1);
@@ -201,12 +206,6 @@
 	return alloc_ep_req(ep, length, length);
 }
 
-static void free_ep_req(struct usb_ep *ep, struct usb_request *req)
-{
-	kfree(req->buf);
-	usb_ep_free_request(ep, req);
-}
-
 static const uint8_t f_midi_cin_length[] = {
 	0, 0, 2, 3, 3, 1, 2, 3, 3, 3, 3, 3, 2, 2, 3, 1
 };
@@ -258,7 +257,8 @@
 		} else if (ep == midi->in_ep) {
 			/* Our transmit completed. See if there's more to go.
 			 * f_midi_transmit eats req, don't queue it again. */
-			f_midi_transmit(midi, req);
+			req->length = 0;
+			f_midi_transmit(midi);
 			return;
 		}
 		break;
@@ -269,10 +269,12 @@
 	case -ESHUTDOWN:	/* disconnect from host */
 		VDBG(cdev, "%s gone (%d), %d/%d\n", ep->name, status,
 				req->actual, req->length);
-		if (ep == midi->out_ep)
+		if (ep == midi->out_ep) {
 			f_midi_handle_out_data(ep, req);
-
-		free_ep_req(ep, req);
+			/* We don't need to free IN requests because it's handled
+			 * by the midi->in_req_fifo. */
+			free_ep_req(ep, req);
+		}
 		return;
 
 	case -EOVERFLOW:	/* buffer overrun on read means that
@@ -324,12 +326,11 @@
 static int f_midi_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 {
 	struct f_midi *midi = func_to_midi(f);
-	struct usb_composite_dev *cdev = f->config->cdev;
 	unsigned i;
 	int err;
 
-	/* For Control Device interface we do nothing */
-	if (intf == 0)
+	/* we only set alt for MIDIStreaming interface */
+	if (intf != midi->ms_id)
 		return 0;
 
 	err = f_midi_start_ep(midi, f, midi->in_ep);
@@ -340,24 +341,20 @@
 	if (err)
 		return err;
 
-	usb_ep_disable(midi->out_ep);
+	/* pre-allocate write usb requests to use on f_midi_transmit. */
+	while (kfifo_avail(&midi->in_req_fifo)) {
+		struct usb_request *req =
+			midi_alloc_ep_req(midi->in_ep, midi->buflen);
 
-	err = config_ep_by_speed(midi->gadget, f, midi->out_ep);
-	if (err) {
-		ERROR(cdev, "can't configure %s: %d\n",
-		      midi->out_ep->name, err);
-		return err;
+		if (req == NULL)
+			return -ENOMEM;
+
+		req->length = 0;
+		req->complete = f_midi_complete;
+
+		kfifo_put(&midi->in_req_fifo, req);
 	}
 
-	err = usb_ep_enable(midi->out_ep);
-	if (err) {
-		ERROR(cdev, "can't start %s: %d\n",
-		      midi->out_ep->name, err);
-		return err;
-	}
-
-	midi->out_ep->driver_data = midi;
-
 	/* allocate a bunch of read buffers and queue them all at once. */
 	for (i = 0; i < midi->qlen && err == 0; i++) {
 		struct usb_request *req =
@@ -368,9 +365,10 @@
 		req->complete = f_midi_complete;
 		err = usb_ep_queue(midi->out_ep, req, GFP_ATOMIC);
 		if (err) {
-			ERROR(midi, "%s queue req: %d\n",
+			ERROR(midi, "%s: couldn't enqueue request: %d\n",
 				    midi->out_ep->name, err);
 			free_ep_req(midi->out_ep, req);
+			return err;
 		}
 	}
 
@@ -381,6 +379,7 @@
 {
 	struct f_midi *midi = func_to_midi(f);
 	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_request *req = NULL;
 
 	DBG(cdev, "disable\n");
 
@@ -390,6 +389,10 @@
 	 */
 	usb_ep_disable(midi->in_ep);
 	usb_ep_disable(midi->out_ep);
+
+	/* release IN requests */
+	while (kfifo_get(&midi->in_req_fifo, &req))
+		free_ep_req(midi->in_ep, req);
 }
 
 static int f_midi_snd_free(struct snd_device *device)
@@ -511,57 +514,113 @@
 	}
 }
 
-static void f_midi_transmit(struct f_midi *midi, struct usb_request *req)
+static void f_midi_drop_out_substreams(struct f_midi *midi)
 {
-	struct usb_ep *ep = midi->in_ep;
-	int i;
-
-	if (!ep)
-		return;
-
-	if (!req)
-		req = midi_alloc_ep_req(ep, midi->buflen);
-
-	if (!req) {
-		ERROR(midi, "%s: alloc_ep_request failed\n", __func__);
-		return;
-	}
-	req->length = 0;
-	req->complete = f_midi_complete;
+	unsigned int i;
 
 	for (i = 0; i < MAX_PORTS; i++) {
 		struct gmidi_in_port *port = midi->in_port[i];
 		struct snd_rawmidi_substream *substream = midi->in_substream[i];
 
-		if (!port || !port->active || !substream)
+		if (!port)
+			break;
+
+		if (!port->active || !substream)
 			continue;
 
-		while (req->length + 3 < midi->buflen) {
-			uint8_t b;
-			if (snd_rawmidi_transmit(substream, &b, 1) != 1) {
-				port->active = 0;
+		snd_rawmidi_drop_output(substream);
+	}
+}
+
+static void f_midi_transmit(struct f_midi *midi)
+{
+	struct usb_ep *ep = midi->in_ep;
+	bool active;
+
+	/* We only care about USB requests if IN endpoint is enabled */
+	if (!ep || !ep->enabled)
+		goto drop_out;
+
+	do {
+		struct usb_request *req = NULL;
+		unsigned int len, i;
+
+		active = false;
+
+		/* We peek the request in order to reuse it if it fails
+		 * to enqueue on its endpoint */
+		len = kfifo_peek(&midi->in_req_fifo, &req);
+		if (len != 1) {
+			ERROR(midi, "%s: Couldn't get usb request\n", __func__);
+			goto drop_out;
+		}
+
+		/* If buffer overrun, then we ignore this transmission.
+		 * IMPORTANT: This will cause the user-space rawmidi device to block until a) usb
+		 * requests have been completed or b) snd_rawmidi_write() times out. */
+		if (req->length > 0)
+			return;
+
+		for (i = midi->in_last_port; i < MAX_PORTS; i++) {
+			struct gmidi_in_port *port = midi->in_port[i];
+			struct snd_rawmidi_substream *substream = midi->in_substream[i];
+
+			if (!port) {
+				/* Reset counter when we reach the last available port */
+				midi->in_last_port = 0;
 				break;
 			}
-			f_midi_transmit_byte(req, port, b);
+
+			if (!port->active || !substream)
+				continue;
+
+			while (req->length + 3 < midi->buflen) {
+				uint8_t b;
+
+				if (snd_rawmidi_transmit(substream, &b, 1) != 1) {
+					port->active = 0;
+					break;
+				}
+				f_midi_transmit_byte(req, port, b);
+			}
+
+			active = !!port->active;
+			/* Check if last port is still active, which means that
+			 * there is still data on that substream but this current
+			 * request run out of space. */
+			if (active) {
+				midi->in_last_port = i;
+				/* There is no need to re-iterate though midi ports. */
+				break;
+			}
 		}
-	}
 
-	if (req->length > 0 && ep->enabled) {
-		int err;
+		if (req->length > 0) {
+			int err;
 
-		err = usb_ep_queue(ep, req, GFP_ATOMIC);
-		if (err < 0)
-			ERROR(midi, "%s queue req: %d\n",
-			      midi->in_ep->name, err);
-	} else {
-		free_ep_req(ep, req);
-	}
+			err = usb_ep_queue(ep, req, GFP_ATOMIC);
+			if (err < 0) {
+				ERROR(midi, "%s failed to queue req: %d\n",
+				      midi->in_ep->name, err);
+				req->length = 0; /* Re-use request next time. */
+			} else {
+				/* Upon success, put request at the back of the queue. */
+				kfifo_skip(&midi->in_req_fifo);
+				kfifo_put(&midi->in_req_fifo, req);
+			}
+		}
+	} while (active);
+
+	return;
+
+drop_out:
+	f_midi_drop_out_substreams(midi);
 }
 
 static void f_midi_in_tasklet(unsigned long data)
 {
 	struct f_midi *midi = (struct f_midi *) data;
-	f_midi_transmit(midi, NULL);
+	f_midi_transmit(midi);
 }
 
 static int f_midi_in_open(struct snd_rawmidi_substream *substream)
@@ -687,6 +746,7 @@
 		goto fail;
 	}
 	midi->rmidi = rmidi;
+	midi->in_last_port = 0;
 	strcpy(rmidi->name, card->shortname);
 	rmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT |
 			    SNDRV_RAWMIDI_INFO_INPUT |
@@ -755,6 +815,7 @@
 		goto fail;
 	ms_interface_desc.bInterfaceNumber = status;
 	ac_header_desc.baInterfaceNr[0] = status;
+	midi->ms_id = status;
 
 	status = -ENODEV;
 
@@ -1075,6 +1136,7 @@
 	mutex_lock(&opts->lock);
 	for (i = opts->in_ports - 1; i >= 0; --i)
 		kfree(midi->in_port[i]);
+	kfifo_free(&midi->in_req_fifo);
 	kfree(midi);
 	--opts->refcnt;
 	mutex_unlock(&opts->lock);
@@ -1148,6 +1210,12 @@
 	midi->index = opts->index;
 	midi->buflen = opts->buflen;
 	midi->qlen = opts->qlen;
+	midi->in_last_port = 0;
+
+	status = kfifo_alloc(&midi->in_req_fifo, midi->qlen, GFP_KERNEL);
+	if (status)
+		goto setup_fail;
+
 	++opts->refcnt;
 	mutex_unlock(&opts->lock);
 
diff --git a/drivers/usb/gadget/function/f_sourcesink.c b/drivers/usb/gadget/function/f_sourcesink.c
index 9f3ced6..242ba5c 100644
--- a/drivers/usb/gadget/function/f_sourcesink.c
+++ b/drivers/usb/gadget/function/f_sourcesink.c
@@ -34,13 +34,6 @@
  * plus two that support control-OUT tests.  If the optional "autoresume"
  * mode is enabled, it provides good functional coverage for the "USBCV"
  * test harness from USB-IF.
- *
- * Note that because this doesn't queue more than one request at a time,
- * some other function must be used to test queueing logic.  The network
- * link (g_ether) is the best overall option for that, since its TX and RX
- * queues are relatively independent, will receive a range of packet sizes,
- * and can often be made to run out completely.  Those issues are important
- * when stress testing peripheral controller drivers.
  */
 struct f_sourcesink {
 	struct usb_function	function;
@@ -57,6 +50,8 @@
 	unsigned isoc_mult;
 	unsigned isoc_maxburst;
 	unsigned buflen;
+	unsigned bulk_qlen;
+	unsigned iso_qlen;
 };
 
 static inline struct f_sourcesink *func_to_ss(struct usb_function *f)
@@ -303,12 +298,6 @@
 	return alloc_ep_req(ep, len, ss->buflen);
 }
 
-void free_ep_req(struct usb_ep *ep, struct usb_request *req)
-{
-	kfree(req->buf);
-	usb_ep_free_request(ep, req);
-}
-
 static void disable_ep(struct usb_composite_dev *cdev, struct usb_ep *ep)
 {
 	int			value;
@@ -595,31 +584,33 @@
 {
 	struct usb_ep		*ep;
 	struct usb_request	*req;
-	int			i, size, status;
+	int			i, size, qlen, status = 0;
 
-	for (i = 0; i < 8; i++) {
-		if (is_iso) {
-			switch (speed) {
-			case USB_SPEED_SUPER:
-				size = ss->isoc_maxpacket *
-						(ss->isoc_mult + 1) *
-						(ss->isoc_maxburst + 1);
-				break;
-			case USB_SPEED_HIGH:
-				size = ss->isoc_maxpacket * (ss->isoc_mult + 1);
-				break;
-			default:
-				size = ss->isoc_maxpacket > 1023 ?
-						1023 : ss->isoc_maxpacket;
-				break;
-			}
-			ep = is_in ? ss->iso_in_ep : ss->iso_out_ep;
-			req = ss_alloc_ep_req(ep, size);
-		} else {
-			ep = is_in ? ss->in_ep : ss->out_ep;
-			req = ss_alloc_ep_req(ep, 0);
+	if (is_iso) {
+		switch (speed) {
+		case USB_SPEED_SUPER:
+			size = ss->isoc_maxpacket *
+					(ss->isoc_mult + 1) *
+					(ss->isoc_maxburst + 1);
+			break;
+		case USB_SPEED_HIGH:
+			size = ss->isoc_maxpacket * (ss->isoc_mult + 1);
+			break;
+		default:
+			size = ss->isoc_maxpacket > 1023 ?
+					1023 : ss->isoc_maxpacket;
+			break;
 		}
+		ep = is_in ? ss->iso_in_ep : ss->iso_out_ep;
+		qlen = ss->iso_qlen;
+	} else {
+		ep = is_in ? ss->in_ep : ss->out_ep;
+		qlen = ss->bulk_qlen;
+		size = 0;
+	}
 
+	for (i = 0; i < qlen; i++) {
+		req = ss_alloc_ep_req(ep, size);
 		if (!req)
 			return -ENOMEM;
 
@@ -638,10 +629,8 @@
 			      is_iso ? "ISO-" : "", is_in ? "IN" : "OUT",
 			      ep->name, status);
 			free_ep_req(ep, req);
+			return status;
 		}
-
-		if (!is_iso)
-			break;
 	}
 
 	return status;
@@ -869,6 +858,8 @@
 	ss->isoc_mult = ss_opts->isoc_mult;
 	ss->isoc_maxburst = ss_opts->isoc_maxburst;
 	ss->buflen = ss_opts->bulk_buflen;
+	ss->bulk_qlen = ss_opts->bulk_qlen;
+	ss->iso_qlen = ss_opts->iso_qlen;
 
 	ss->function.name = "source/sink";
 	ss->function.bind = sourcesink_bind;
@@ -1153,6 +1144,82 @@
 
 CONFIGFS_ATTR(f_ss_opts_, bulk_buflen);
 
+static ssize_t f_ss_opts_bulk_qlen_show(struct config_item *item, char *page)
+{
+	struct f_ss_opts *opts = to_f_ss_opts(item);
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%u\n", opts->bulk_qlen);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_ss_opts_bulk_qlen_store(struct config_item *item,
+					   const char *page, size_t len)
+{
+	struct f_ss_opts *opts = to_f_ss_opts(item);
+	int ret;
+	u32 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou32(page, 0, &num);
+	if (ret)
+		goto end;
+
+	opts->bulk_qlen = num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+CONFIGFS_ATTR(f_ss_opts_, bulk_qlen);
+
+static ssize_t f_ss_opts_iso_qlen_show(struct config_item *item, char *page)
+{
+	struct f_ss_opts *opts = to_f_ss_opts(item);
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%u\n", opts->iso_qlen);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_ss_opts_iso_qlen_store(struct config_item *item,
+					   const char *page, size_t len)
+{
+	struct f_ss_opts *opts = to_f_ss_opts(item);
+	int ret;
+	u32 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou32(page, 0, &num);
+	if (ret)
+		goto end;
+
+	opts->iso_qlen = num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+CONFIGFS_ATTR(f_ss_opts_, iso_qlen);
+
 static struct configfs_attribute *ss_attrs[] = {
 	&f_ss_opts_attr_pattern,
 	&f_ss_opts_attr_isoc_interval,
@@ -1160,6 +1227,8 @@
 	&f_ss_opts_attr_isoc_mult,
 	&f_ss_opts_attr_isoc_maxburst,
 	&f_ss_opts_attr_bulk_buflen,
+	&f_ss_opts_attr_bulk_qlen,
+	&f_ss_opts_attr_iso_qlen,
 	NULL,
 };
 
@@ -1189,6 +1258,8 @@
 	ss_opts->isoc_interval = GZERO_ISOC_INTERVAL;
 	ss_opts->isoc_maxpacket = GZERO_ISOC_MAXPACKET;
 	ss_opts->bulk_buflen = GZERO_BULK_BUFLEN;
+	ss_opts->bulk_qlen = GZERO_SS_BULK_QLEN;
+	ss_opts->iso_qlen = GZERO_SS_ISO_QLEN;
 
 	config_group_init_type_name(&ss_opts->func_inst.group, "",
 				    &ss_func_type);
diff --git a/drivers/usb/gadget/function/g_zero.h b/drivers/usb/gadget/function/g_zero.h
index 15f1809..492924d0 100644
--- a/drivers/usb/gadget/function/g_zero.h
+++ b/drivers/usb/gadget/function/g_zero.h
@@ -10,6 +10,8 @@
 #define GZERO_QLEN		32
 #define GZERO_ISOC_INTERVAL	4
 #define GZERO_ISOC_MAXPACKET	1024
+#define GZERO_SS_BULK_QLEN	1
+#define GZERO_SS_ISO_QLEN	8
 
 struct usb_zero_options {
 	unsigned pattern;
@@ -19,6 +21,8 @@
 	unsigned isoc_maxburst;
 	unsigned bulk_buflen;
 	unsigned qlen;
+	unsigned ss_bulk_qlen;
+	unsigned ss_iso_qlen;
 };
 
 struct f_ss_opts {
@@ -29,6 +33,8 @@
 	unsigned isoc_mult;
 	unsigned isoc_maxburst;
 	unsigned bulk_buflen;
+	unsigned bulk_qlen;
+	unsigned iso_qlen;
 
 	/*
 	 * Read/write access to configfs attributes is handled by configfs.
@@ -59,7 +65,6 @@
 int lb_modinit(void);
 
 /* common utilities */
-void free_ep_req(struct usb_ep *ep, struct usb_request *req);
 void disable_endpoints(struct usb_composite_dev *cdev,
 		struct usb_ep *in, struct usb_ep *out,
 		struct usb_ep *iso_in, struct usb_ep *iso_out);
diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index 6554322..637809e 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -143,21 +143,11 @@
 
 static int ueth_change_mtu(struct net_device *net, int new_mtu)
 {
-	struct eth_dev	*dev = netdev_priv(net);
-	unsigned long	flags;
-	int		status = 0;
+	if (new_mtu <= ETH_HLEN || new_mtu > GETHER_MAX_ETH_FRAME_LEN)
+		return -ERANGE;
+	net->mtu = new_mtu;
 
-	/* don't change MTU on "live" link (peer won't know) */
-	spin_lock_irqsave(&dev->lock, flags);
-	if (dev->port_usb)
-		status = -EBUSY;
-	else if (new_mtu <= ETH_HLEN || new_mtu > GETHER_MAX_ETH_FRAME_LEN)
-		status = -ERANGE;
-	else
-		net->mtu = new_mtu;
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	return status;
+	return 0;
 }
 
 static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p)
diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c
index f7771d8..6af145f 100644
--- a/drivers/usb/gadget/function/u_serial.c
+++ b/drivers/usb/gadget/function/u_serial.c
@@ -27,6 +27,8 @@
 #include <linux/slab.h>
 #include <linux/export.h>
 #include <linux/module.h>
+#include <linux/console.h>
+#include <linux/kthread.h>
 
 #include "u_serial.h"
 
@@ -79,6 +81,7 @@
  */
 #define QUEUE_SIZE		16
 #define WRITE_BUF_SIZE		8192		/* TX only */
+#define GS_CONSOLE_BUF_SIZE	8192
 
 /* circular buffer */
 struct gs_buf {
@@ -88,6 +91,17 @@
 	char			*buf_put;
 };
 
+/* console info */
+struct gscons_info {
+	struct gs_port		*port;
+	struct task_struct	*console_thread;
+	struct gs_buf		con_buf;
+	/* protect the buf and busy flag */
+	spinlock_t		con_lock;
+	int			req_busy;
+	struct usb_request	*console_req;
+};
+
 /*
  * The port structure holds info for each port, one for each minor number
  * (and thus for each /dev/ node).
@@ -1023,6 +1037,246 @@
 
 static struct tty_driver *gs_tty_driver;
 
+#ifdef CONFIG_U_SERIAL_CONSOLE
+
+static struct gscons_info gscons_info;
+static struct console gserial_cons;
+
+static struct usb_request *gs_request_new(struct usb_ep *ep)
+{
+	struct usb_request *req = usb_ep_alloc_request(ep, GFP_ATOMIC);
+	if (!req)
+		return NULL;
+
+	req->buf = kmalloc(ep->maxpacket, GFP_ATOMIC);
+	if (!req->buf) {
+		usb_ep_free_request(ep, req);
+		return NULL;
+	}
+
+	return req;
+}
+
+static void gs_request_free(struct usb_request *req, struct usb_ep *ep)
+{
+	if (!req)
+		return;
+
+	kfree(req->buf);
+	usb_ep_free_request(ep, req);
+}
+
+static void gs_complete_out(struct usb_ep *ep, struct usb_request *req)
+{
+	struct gscons_info *info = &gscons_info;
+
+	switch (req->status) {
+	default:
+		pr_warn("%s: unexpected %s status %d\n",
+			__func__, ep->name, req->status);
+	case 0:
+		/* normal completion */
+		spin_lock(&info->con_lock);
+		info->req_busy = 0;
+		spin_unlock(&info->con_lock);
+
+		wake_up_process(info->console_thread);
+		break;
+	case -ESHUTDOWN:
+		/* disconnect */
+		pr_vdebug("%s: %s shutdown\n", __func__, ep->name);
+		break;
+	}
+}
+
+static int gs_console_connect(int port_num)
+{
+	struct gscons_info *info = &gscons_info;
+	struct gs_port *port;
+	struct usb_ep *ep;
+
+	if (port_num != gserial_cons.index) {
+		pr_err("%s: port num [%d] is not support console\n",
+		       __func__, port_num);
+		return -ENXIO;
+	}
+
+	port = ports[port_num].port;
+	ep = port->port_usb->in;
+	if (!info->console_req) {
+		info->console_req = gs_request_new(ep);
+		if (!info->console_req)
+			return -ENOMEM;
+		info->console_req->complete = gs_complete_out;
+	}
+
+	info->port = port;
+	spin_lock(&info->con_lock);
+	info->req_busy = 0;
+	spin_unlock(&info->con_lock);
+	pr_vdebug("port[%d] console connect!\n", port_num);
+	return 0;
+}
+
+static void gs_console_disconnect(struct usb_ep *ep)
+{
+	struct gscons_info *info = &gscons_info;
+	struct usb_request *req = info->console_req;
+
+	gs_request_free(req, ep);
+	info->console_req = NULL;
+}
+
+static int gs_console_thread(void *data)
+{
+	struct gscons_info *info = &gscons_info;
+	struct gs_port *port;
+	struct usb_request *req;
+	struct usb_ep *ep;
+	int xfer, ret, count, size;
+
+	do {
+		port = info->port;
+		set_current_state(TASK_INTERRUPTIBLE);
+		if (!port || !port->port_usb
+		    || !port->port_usb->in || !info->console_req)
+			goto sched;
+
+		req = info->console_req;
+		ep = port->port_usb->in;
+
+		spin_lock_irq(&info->con_lock);
+		count = gs_buf_data_avail(&info->con_buf);
+		size = ep->maxpacket;
+
+		if (count > 0 && !info->req_busy) {
+			set_current_state(TASK_RUNNING);
+			if (count < size)
+				size = count;
+
+			xfer = gs_buf_get(&info->con_buf, req->buf, size);
+			req->length = xfer;
+
+			spin_unlock(&info->con_lock);
+			ret = usb_ep_queue(ep, req, GFP_ATOMIC);
+			spin_lock(&info->con_lock);
+			if (ret < 0)
+				info->req_busy = 0;
+			else
+				info->req_busy = 1;
+
+			spin_unlock_irq(&info->con_lock);
+		} else {
+			spin_unlock_irq(&info->con_lock);
+sched:
+			if (kthread_should_stop()) {
+				set_current_state(TASK_RUNNING);
+				break;
+			}
+			schedule();
+		}
+	} while (1);
+
+	return 0;
+}
+
+static int gs_console_setup(struct console *co, char *options)
+{
+	struct gscons_info *info = &gscons_info;
+	int status;
+
+	info->port = NULL;
+	info->console_req = NULL;
+	info->req_busy = 0;
+	spin_lock_init(&info->con_lock);
+
+	status = gs_buf_alloc(&info->con_buf, GS_CONSOLE_BUF_SIZE);
+	if (status) {
+		pr_err("%s: allocate console buffer failed\n", __func__);
+		return status;
+	}
+
+	info->console_thread = kthread_create(gs_console_thread,
+					      co, "gs_console");
+	if (IS_ERR(info->console_thread)) {
+		pr_err("%s: cannot create console thread\n", __func__);
+		gs_buf_free(&info->con_buf);
+		return PTR_ERR(info->console_thread);
+	}
+	wake_up_process(info->console_thread);
+
+	return 0;
+}
+
+static void gs_console_write(struct console *co,
+			     const char *buf, unsigned count)
+{
+	struct gscons_info *info = &gscons_info;
+	unsigned long flags;
+
+	spin_lock_irqsave(&info->con_lock, flags);
+	gs_buf_put(&info->con_buf, buf, count);
+	spin_unlock_irqrestore(&info->con_lock, flags);
+
+	wake_up_process(info->console_thread);
+}
+
+static struct tty_driver *gs_console_device(struct console *co, int *index)
+{
+	struct tty_driver **p = (struct tty_driver **)co->data;
+
+	if (!*p)
+		return NULL;
+
+	*index = co->index;
+	return *p;
+}
+
+static struct console gserial_cons = {
+	.name =		"ttyGS",
+	.write =	gs_console_write,
+	.device =	gs_console_device,
+	.setup =	gs_console_setup,
+	.flags =	CON_PRINTBUFFER,
+	.index =	-1,
+	.data =		&gs_tty_driver,
+};
+
+static void gserial_console_init(void)
+{
+	register_console(&gserial_cons);
+}
+
+static void gserial_console_exit(void)
+{
+	struct gscons_info *info = &gscons_info;
+
+	unregister_console(&gserial_cons);
+	kthread_stop(info->console_thread);
+	gs_buf_free(&info->con_buf);
+}
+
+#else
+
+static int gs_console_connect(int port_num)
+{
+	return 0;
+}
+
+static void gs_console_disconnect(struct usb_ep *ep)
+{
+}
+
+static void gserial_console_init(void)
+{
+}
+
+static void gserial_console_exit(void)
+{
+}
+
+#endif
+
 static int
 gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding)
 {
@@ -1096,6 +1350,7 @@
 
 	gserial_free_port(port);
 	tty_unregister_device(gs_tty_driver, port_num);
+	gserial_console_exit();
 }
 EXPORT_SYMBOL_GPL(gserial_free_line);
 
@@ -1138,6 +1393,7 @@
 		goto err;
 	}
 	*line_num = port_num;
+	gserial_console_init();
 err:
 	return ret;
 }
@@ -1219,6 +1475,7 @@
 			gser->disconnect(gser);
 	}
 
+	status = gs_console_connect(port_num);
 	spin_unlock_irqrestore(&port->port_lock, flags);
 
 	return status;
@@ -1277,6 +1534,7 @@
 	port->read_allocated = port->read_started =
 		port->write_allocated = port->write_started = 0;
 
+	gs_console_disconnect(gser->in);
 	spin_unlock_irqrestore(&port->port_lock, flags);
 }
 EXPORT_SYMBOL_GPL(gserial_disconnect);
diff --git a/drivers/usb/gadget/legacy/acm_ms.c b/drivers/usb/gadget/legacy/acm_ms.c
index 4b158e2..c16089e 100644
--- a/drivers/usb/gadget/legacy/acm_ms.c
+++ b/drivers/usb/gadget/legacy/acm_ms.c
@@ -40,7 +40,7 @@
 	.bLength =		sizeof device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
 
-	.bcdUSB =		cpu_to_le16(0x0200),
+	/* .bcdUSB = DYNAMIC */
 
 	.bDeviceClass =		USB_CLASS_MISC /* 0xEF */,
 	.bDeviceSubClass =	2,
diff --git a/drivers/usb/gadget/legacy/audio.c b/drivers/usb/gadget/legacy/audio.c
index 685cf3b..5d7b3c6 100644
--- a/drivers/usb/gadget/legacy/audio.c
+++ b/drivers/usb/gadget/legacy/audio.c
@@ -123,7 +123,7 @@
 	.bLength =		sizeof device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
 
-	.bcdUSB =		cpu_to_le16(0x200),
+	/* .bcdUSB = DYNAMIC */
 
 #ifdef CONFIG_GADGET_UAC1
 	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
diff --git a/drivers/usb/gadget/legacy/cdc2.c b/drivers/usb/gadget/legacy/cdc2.c
index ecd8c8d..51c0868 100644
--- a/drivers/usb/gadget/legacy/cdc2.c
+++ b/drivers/usb/gadget/legacy/cdc2.c
@@ -43,7 +43,7 @@
 	.bLength =		sizeof device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
 
-	.bcdUSB =		cpu_to_le16(0x0200),
+	/* .bcdUSB = DYNAMIC */
 
 	.bDeviceClass =		USB_CLASS_COMM,
 	.bDeviceSubClass =	0,
diff --git a/drivers/usb/gadget/legacy/ether.c b/drivers/usb/gadget/legacy/ether.c
index 31e9160..25a2c2e 100644
--- a/drivers/usb/gadget/legacy/ether.c
+++ b/drivers/usb/gadget/legacy/ether.c
@@ -151,7 +151,7 @@
 	.bLength =		sizeof device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
 
-	.bcdUSB =		cpu_to_le16 (0x0200),
+	/* .bcdUSB = DYNAMIC */
 
 	.bDeviceClass =		USB_CLASS_COMM,
 	.bDeviceSubClass =	0,
diff --git a/drivers/usb/gadget/legacy/g_ffs.c b/drivers/usb/gadget/legacy/g_ffs.c
index 320a81b..f85639e 100644
--- a/drivers/usb/gadget/legacy/g_ffs.c
+++ b/drivers/usb/gadget/legacy/g_ffs.c
@@ -69,7 +69,7 @@
 	.bLength		= sizeof gfs_dev_desc,
 	.bDescriptorType	= USB_DT_DEVICE,
 
-	.bcdUSB			= cpu_to_le16(0x0200),
+	/* .bcdUSB = DYNAMIC */
 	.bDeviceClass		= USB_CLASS_PER_INTERFACE,
 
 	.idVendor		= cpu_to_le16(GFS_VENDOR_ID),
diff --git a/drivers/usb/gadget/legacy/gmidi.c b/drivers/usb/gadget/legacy/gmidi.c
index 8a18348..fc2ac15 100644
--- a/drivers/usb/gadget/legacy/gmidi.c
+++ b/drivers/usb/gadget/legacy/gmidi.c
@@ -21,19 +21,12 @@
 /* #define VERBOSE_DEBUG */
 
 #include <linux/kernel.h>
-#include <linux/slab.h>
 #include <linux/module.h>
-#include <linux/device.h>
 
-#include <sound/core.h>
 #include <sound/initval.h>
-#include <sound/rawmidi.h>
 
-#include <linux/usb/ch9.h>
 #include <linux/usb/composite.h>
 #include <linux/usb/gadget.h>
-#include <linux/usb/audio.h>
-#include <linux/usb/midi.h>
 
 #include "u_midi.h"
 
@@ -42,7 +35,6 @@
 MODULE_AUTHOR("Ben Williamson");
 MODULE_LICENSE("GPL v2");
 
-static const char shortname[] = "g_midi";
 static const char longname[] = "MIDI Gadget";
 
 USB_GADGET_COMPOSITE_OPTIONS();
@@ -61,7 +53,7 @@
 
 static unsigned int qlen = 32;
 module_param(qlen, uint, S_IRUGO);
-MODULE_PARM_DESC(qlen, "USB read request queue length");
+MODULE_PARM_DESC(qlen, "USB read and write request queue length");
 
 static unsigned int in_ports = 1;
 module_param(in_ports, uint, S_IRUGO);
@@ -86,7 +78,7 @@
 static struct usb_device_descriptor device_desc = {
 	.bLength =		USB_DT_DEVICE_SIZE,
 	.bDescriptorType =	USB_DT_DEVICE,
-	.bcdUSB =		cpu_to_le16(0x0200),
+	/* .bcdUSB = DYNAMIC */
 	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
 	.idVendor =		cpu_to_le16(DRIVER_VENDOR_NUM),
 	.idProduct =		cpu_to_le16(DRIVER_PRODUCT_NUM),
diff --git a/drivers/usb/gadget/legacy/hid.c b/drivers/usb/gadget/legacy/hid.c
index 7e5d2c4..a71a884 100644
--- a/drivers/usb/gadget/legacy/hid.c
+++ b/drivers/usb/gadget/legacy/hid.c
@@ -47,7 +47,7 @@
 	.bLength =		sizeof device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
 
-	.bcdUSB =		cpu_to_le16(0x0200),
+	/* .bcdUSB = DYNAMIC */
 
 	/* .bDeviceClass =		USB_CLASS_COMM, */
 	/* .bDeviceSubClass =	0, */
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index f454c7a..365afd7 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -1137,10 +1137,9 @@
 						dev->gadget->ep0, dev->req,
 						GFP_KERNEL);
 				}
+				spin_lock_irq(&dev->lock);
 				if (retval < 0) {
-					spin_lock_irq (&dev->lock);
 					clean_req (dev->gadget->ep0, dev->req);
-					spin_unlock_irq (&dev->lock);
 				} else
 					retval = len;
 
diff --git a/drivers/usb/gadget/legacy/mass_storage.c b/drivers/usb/gadget/legacy/mass_storage.c
index bda3c51..e61af53 100644
--- a/drivers/usb/gadget/legacy/mass_storage.c
+++ b/drivers/usb/gadget/legacy/mass_storage.c
@@ -55,7 +55,7 @@
 	.bLength =		sizeof msg_device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
 
-	.bcdUSB =		cpu_to_le16(0x0200),
+	/* .bcdUSB = DYNAMIC */
 	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
 
 	/* Vendor and product id can be overridden by module parameters.  */
diff --git a/drivers/usb/gadget/legacy/multi.c b/drivers/usb/gadget/legacy/multi.c
index 4fe794d..229d704 100644
--- a/drivers/usb/gadget/legacy/multi.c
+++ b/drivers/usb/gadget/legacy/multi.c
@@ -67,7 +67,7 @@
 	.bLength =		sizeof device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
 
-	.bcdUSB =		cpu_to_le16(0x0200),
+	/* .bcdUSB = DYNAMIC */
 
 	.bDeviceClass =		USB_CLASS_MISC /* 0xEF */,
 	.bDeviceSubClass =	2,
diff --git a/drivers/usb/gadget/legacy/ncm.c b/drivers/usb/gadget/legacy/ncm.c
index 2bae438..0aba682 100644
--- a/drivers/usb/gadget/legacy/ncm.c
+++ b/drivers/usb/gadget/legacy/ncm.c
@@ -49,7 +49,7 @@
 	.bLength =		sizeof device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
 
-	.bcdUSB =		cpu_to_le16 (0x0200),
+	/* .bcdUSB = DYNAMIC */
 
 	.bDeviceClass =		USB_CLASS_COMM,
 	.bDeviceSubClass =	0,
diff --git a/drivers/usb/gadget/legacy/nokia.c b/drivers/usb/gadget/legacy/nokia.c
index 8b3f6fb..0997504 100644
--- a/drivers/usb/gadget/legacy/nokia.c
+++ b/drivers/usb/gadget/legacy/nokia.c
@@ -89,7 +89,7 @@
 static struct usb_device_descriptor device_desc = {
 	.bLength		= USB_DT_DEVICE_SIZE,
 	.bDescriptorType	= USB_DT_DEVICE,
-	.bcdUSB			= cpu_to_le16(0x0200),
+	/* .bcdUSB = DYNAMIC */
 	.bDeviceClass		= USB_CLASS_COMM,
 	.idVendor		= cpu_to_le16(NOKIA_VENDOR_ID),
 	.idProduct		= cpu_to_le16(NOKIA_PRODUCT_ID),
diff --git a/drivers/usb/gadget/legacy/printer.c b/drivers/usb/gadget/legacy/printer.c
index a22d30a..6f969a8 100644
--- a/drivers/usb/gadget/legacy/printer.c
+++ b/drivers/usb/gadget/legacy/printer.c
@@ -71,7 +71,7 @@
 static struct usb_device_descriptor device_desc = {
 	.bLength =		sizeof device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
-	.bcdUSB =		cpu_to_le16(0x0200),
+	/* .bcdUSB = DYNAMIC */
 	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
 	.bDeviceSubClass =	0,
 	.bDeviceProtocol =	0,
diff --git a/drivers/usb/gadget/legacy/serial.c b/drivers/usb/gadget/legacy/serial.c
index c5d42e0..9d89adce7 100644
--- a/drivers/usb/gadget/legacy/serial.c
+++ b/drivers/usb/gadget/legacy/serial.c
@@ -65,7 +65,7 @@
 static struct usb_device_descriptor device_desc = {
 	.bLength =		USB_DT_DEVICE_SIZE,
 	.bDescriptorType =	USB_DT_DEVICE,
-	.bcdUSB =		cpu_to_le16(0x0200),
+	/* .bcdUSB = DYNAMIC */
 	/* .bDeviceClass = f(use_acm) */
 	.bDeviceSubClass =	0,
 	.bDeviceProtocol =	0,
diff --git a/drivers/usb/gadget/legacy/tcm_usb_gadget.c b/drivers/usb/gadget/legacy/tcm_usb_gadget.c
index 22e5615..7857fa4 100644
--- a/drivers/usb/gadget/legacy/tcm_usb_gadget.c
+++ b/drivers/usb/gadget/legacy/tcm_usb_gadget.c
@@ -1974,7 +1974,7 @@
 static struct usb_device_descriptor usbg_device_desc = {
 	.bLength =		sizeof(usbg_device_desc),
 	.bDescriptorType =	USB_DT_DEVICE,
-	.bcdUSB =		cpu_to_le16(0x0200),
+	/* .bcdUSB = DYNAMIC */
 	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
 	.idVendor =		cpu_to_le16(UAS_VENDOR_ID),
 	.idProduct =		cpu_to_le16(UAS_PRODUCT_ID),
diff --git a/drivers/usb/gadget/legacy/webcam.c b/drivers/usb/gadget/legacy/webcam.c
index 72c976b..f9661cd 100644
--- a/drivers/usb/gadget/legacy/webcam.c
+++ b/drivers/usb/gadget/legacy/webcam.c
@@ -77,7 +77,7 @@
 static struct usb_device_descriptor webcam_device_descriptor = {
 	.bLength		= USB_DT_DEVICE_SIZE,
 	.bDescriptorType	= USB_DT_DEVICE,
-	.bcdUSB			= cpu_to_le16(0x0200),
+	/* .bcdUSB = DYNAMIC */
 	.bDeviceClass		= USB_CLASS_MISC,
 	.bDeviceSubClass	= 0x02,
 	.bDeviceProtocol	= 0x01,
diff --git a/drivers/usb/gadget/legacy/zero.c b/drivers/usb/gadget/legacy/zero.c
index 37a4100..d02e2ce 100644
--- a/drivers/usb/gadget/legacy/zero.c
+++ b/drivers/usb/gadget/legacy/zero.c
@@ -68,6 +68,8 @@
 	.isoc_maxpacket = GZERO_ISOC_MAXPACKET,
 	.bulk_buflen = GZERO_BULK_BUFLEN,
 	.qlen = GZERO_QLEN,
+	.ss_bulk_qlen = GZERO_SS_BULK_QLEN,
+	.ss_iso_qlen = GZERO_SS_ISO_QLEN,
 };
 
 /*-------------------------------------------------------------------------*/
@@ -113,7 +115,7 @@
 	.bLength =		sizeof device_desc,
 	.bDescriptorType =	USB_DT_DEVICE,
 
-	.bcdUSB =		cpu_to_le16(0x0200),
+	/* .bcdUSB = DYNAMIC */
 	.bDeviceClass =		USB_CLASS_VENDOR_SPEC,
 
 	.idVendor =		cpu_to_le16(DRIVER_VENDOR_NUM),
@@ -255,6 +257,14 @@
 module_param_named(qlen, gzero_options.qlen, uint, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(qlen, "depth of loopback queue");
 
+module_param_named(ss_bulk_qlen, gzero_options.ss_bulk_qlen, uint,
+		S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(bulk_qlen, "depth of sourcesink queue for bulk transfer");
+
+module_param_named(ss_iso_qlen, gzero_options.ss_iso_qlen, uint,
+		S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(iso_qlen, "depth of sourcesink queue for iso transfer");
+
 static int zero_bind(struct usb_composite_dev *cdev)
 {
 	struct f_ss_opts	*ss_opts;
@@ -285,6 +295,8 @@
 	ss_opts->isoc_mult = gzero_options.isoc_mult;
 	ss_opts->isoc_maxburst = gzero_options.isoc_maxburst;
 	ss_opts->bulk_buflen = gzero_options.bulk_buflen;
+	ss_opts->bulk_qlen = gzero_options.ss_bulk_qlen;
+	ss_opts->iso_qlen = gzero_options.ss_iso_qlen;
 
 	func_ss = usb_get_function(func_inst_ss);
 	if (IS_ERR(func_ss)) {
diff --git a/drivers/usb/gadget/u_f.c b/drivers/usb/gadget/u_f.c
index c6276f0..4bc7eea 100644
--- a/drivers/usb/gadget/u_f.c
+++ b/drivers/usb/gadget/u_f.c
@@ -11,7 +11,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/usb/gadget.h>
 #include "u_f.h"
 
 struct usb_request *alloc_ep_req(struct usb_ep *ep, int len, int default_len)
diff --git a/drivers/usb/gadget/u_f.h b/drivers/usb/gadget/u_f.h
index 1d5f0eb..4247cc0 100644
--- a/drivers/usb/gadget/u_f.h
+++ b/drivers/usb/gadget/u_f.h
@@ -16,6 +16,8 @@
 #ifndef __U_F_H__
 #define __U_F_H__
 
+#include <linux/usb/gadget.h>
+
 /* Variable Length Array Macros **********************************************/
 #define vla_group(groupname) size_t groupname##__next = 0
 #define vla_group_size(groupname) groupname##__next
@@ -45,8 +47,12 @@
 struct usb_ep;
 struct usb_request;
 
+/* Requests allocated via alloc_ep_req() must be freed by free_ep_req(). */
 struct usb_request *alloc_ep_req(struct usb_ep *ep, int len, int default_len);
+static inline void free_ep_req(struct usb_ep *ep, struct usb_request *req)
+{
+	kfree(req->buf);
+	usb_ep_free_request(ep, req);
+}
 
 #endif /* __U_F_H__ */
-
-
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index cdbff54..753c29b 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -174,6 +174,17 @@
 	   dynamically linked module called "renesas_usbhs" and force all
 	   gadget drivers to also be dynamically linked.
 
+config USB_RENESAS_USB3
+	tristate 'Renesas USB3.0 Peripheral controller'
+	depends on ARCH_SHMOBILE || COMPILE_TEST
+	help
+	   Renesas USB3.0 Peripheral controller is a USB peripheral controller
+	   that supports super, high, and full speed USB 3.0 data transfers.
+
+	   Say "y" to link the driver statically, or "m" to build a
+	   dynamically linked module called "renesas_usb3" and force all
+	   gadget drivers to also be dynamically linked.
+
 config USB_PXA27X
 	tristate "PXA 27x"
 	help
diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile
index fba2049..dfee534 100644
--- a/drivers/usb/gadget/udc/Makefile
+++ b/drivers/usb/gadget/udc/Makefile
@@ -19,6 +19,7 @@
 fsl_usb2_udc-$(CONFIG_ARCH_MXC)	+= fsl_mxc_udc.o
 obj-$(CONFIG_USB_M66592)	+= m66592-udc.o
 obj-$(CONFIG_USB_R8A66597)	+= r8a66597-udc.o
+obj-$(CONFIG_USB_RENESAS_USB3)	+= renesas_usb3.o
 obj-$(CONFIG_USB_FSL_QE)	+= fsl_qe_udc.o
 obj-$(CONFIG_USB_S3C_HSUDC)	+= s3c-hsudc.o
 obj-$(CONFIG_USB_LPC32XX)	+= lpc32xx_udc.o
diff --git a/drivers/usb/gadget/udc/bcm63xx_udc.c b/drivers/usb/gadget/udc/bcm63xx_udc.c
index 8cbb003..f5fccb3 100644
--- a/drivers/usb/gadget/udc/bcm63xx_udc.c
+++ b/drivers/usb/gadget/udc/bcm63xx_udc.c
@@ -1083,7 +1083,7 @@
 	struct bcm63xx_ep *bep = our_ep(ep);
 	struct bcm63xx_udc *udc = bep->udc;
 	struct iudma_ch *iudma = bep->iudma;
-	struct list_head *pos, *n;
+	struct bcm63xx_req *breq, *n;
 	unsigned long flags;
 
 	if (!ep || !ep->desc)
@@ -1099,10 +1099,7 @@
 	iudma_reset_channel(udc, iudma);
 
 	if (!list_empty(&bep->queue)) {
-		list_for_each_safe(pos, n, &bep->queue) {
-			struct bcm63xx_req *breq =
-				list_entry(pos, struct bcm63xx_req, queue);
-
+		list_for_each_entry_safe(breq, n, &bep->queue, queue) {
 			usb_gadget_unmap_request(&udc->gadget, &breq->req,
 						 iudma->is_tx);
 			list_del(&breq->queue);
diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c
index 00b5006..79fe6b7 100644
--- a/drivers/usb/gadget/udc/lpc32xx_udc.c
+++ b/drivers/usb/gadget/udc/lpc32xx_udc.c
@@ -28,42 +28,29 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/interrupt.h>
-#include <linux/proc_fs.h>
 #include <linux/clk.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-#include <linux/i2c.h>
-#include <linux/kthread.h>
-#include <linux/freezer.h>
+#include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmapool.h>
-#include <linux/workqueue.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/proc_fs.h>
+#include <linux/slab.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
 #include <linux/usb/isp1301.h>
 
-#include <asm/byteorder.h>
-#include <mach/hardware.h>
-#include <linux/io.h>
-#include <asm/irq.h>
-
-#include <mach/platform.h>
-#include <mach/irqs.h>
-#include <mach/board.h>
 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #endif
 
+#include <mach/hardware.h>
+#include <mach/platform.h>
+
 /*
  * USB device configuration structure
  */
diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c
new file mode 100644
index 0000000..93a3bec
--- /dev/null
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -0,0 +1,1975 @@
+/*
+ * Renesas USB3.0 Peripheral driver (USB gadget)
+ *
+ * Copyright (C) 2015  Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+/* register definitions */
+#define USB3_AXI_INT_STA	0x008
+#define USB3_AXI_INT_ENA	0x00c
+#define USB3_DMA_INT_STA	0x010
+#define USB3_DMA_INT_ENA	0x014
+#define USB3_USB_COM_CON	0x200
+#define USB3_USB20_CON		0x204
+#define USB3_USB30_CON		0x208
+#define USB3_USB_STA		0x210
+#define USB3_DRD_CON		0x218
+#define USB3_USB_INT_STA_1	0x220
+#define USB3_USB_INT_STA_2	0x224
+#define USB3_USB_INT_ENA_1	0x228
+#define USB3_USB_INT_ENA_2	0x22c
+#define USB3_STUP_DAT_0		0x230
+#define USB3_STUP_DAT_1		0x234
+#define USB3_P0_MOD		0x280
+#define USB3_P0_CON		0x288
+#define USB3_P0_STA		0x28c
+#define USB3_P0_INT_STA		0x290
+#define USB3_P0_INT_ENA		0x294
+#define USB3_P0_LNG		0x2a0
+#define USB3_P0_READ		0x2a4
+#define USB3_P0_WRITE		0x2a8
+#define USB3_PIPE_COM		0x2b0
+#define USB3_PN_MOD		0x2c0
+#define USB3_PN_RAMMAP		0x2c4
+#define USB3_PN_CON		0x2c8
+#define USB3_PN_STA		0x2cc
+#define USB3_PN_INT_STA		0x2d0
+#define USB3_PN_INT_ENA		0x2d4
+#define USB3_PN_LNG		0x2e0
+#define USB3_PN_READ		0x2e4
+#define USB3_PN_WRITE		0x2e8
+#define USB3_SSIFCMD		0x340
+
+/* AXI_INT_ENA and AXI_INT_STA */
+#define AXI_INT_DMAINT		BIT(31)
+#define AXI_INT_EPCINT		BIT(30)
+
+/* LCLKSEL */
+#define LCLKSEL_LSEL		BIT(18)
+
+/* USB_COM_CON */
+#define USB_COM_CON_CONF		BIT(24)
+#define USB_COM_CON_SPD_MODE		BIT(17)
+#define USB_COM_CON_EP0_EN		BIT(16)
+#define USB_COM_CON_DEV_ADDR_SHIFT	8
+#define USB_COM_CON_DEV_ADDR_MASK	GENMASK(14, USB_COM_CON_DEV_ADDR_SHIFT)
+#define USB_COM_CON_DEV_ADDR(n)		(((n) << USB_COM_CON_DEV_ADDR_SHIFT) & \
+					 USB_COM_CON_DEV_ADDR_MASK)
+#define USB_COM_CON_RX_DETECTION	BIT(1)
+#define USB_COM_CON_PIPE_CLR		BIT(0)
+
+/* USB20_CON */
+#define USB20_CON_B2_PUE		BIT(31)
+#define USB20_CON_B2_SUSPEND		BIT(24)
+#define USB20_CON_B2_CONNECT		BIT(17)
+#define USB20_CON_B2_TSTMOD_SHIFT	8
+#define USB20_CON_B2_TSTMOD_MASK	GENMASK(10, USB20_CON_B2_TSTMOD_SHIFT)
+#define USB20_CON_B2_TSTMOD(n)		(((n) << USB20_CON_B2_TSTMOD_SHIFT) & \
+					 USB20_CON_B2_TSTMOD_MASK)
+#define USB20_CON_B2_TSTMOD_EN		BIT(0)
+
+/* USB30_CON */
+#define USB30_CON_POW_SEL_SHIFT		24
+#define USB30_CON_POW_SEL_MASK		GENMASK(26, USB30_CON_POW_SEL_SHIFT)
+#define USB30_CON_POW_SEL_IN_U3		BIT(26)
+#define USB30_CON_POW_SEL_IN_DISCON	0
+#define USB30_CON_POW_SEL_P2_TO_P0	BIT(25)
+#define USB30_CON_POW_SEL_P0_TO_P3	BIT(24)
+#define USB30_CON_POW_SEL_P0_TO_P2	0
+#define USB30_CON_B3_PLLWAKE		BIT(23)
+#define USB30_CON_B3_CONNECT		BIT(17)
+#define USB30_CON_B3_HOTRST_CMP		BIT(1)
+
+/* USB_STA */
+#define USB_STA_SPEED_MASK	(BIT(2) | BIT(1))
+#define USB_STA_SPEED_HS	BIT(2)
+#define USB_STA_SPEED_FS	BIT(1)
+#define USB_STA_SPEED_SS	0
+#define USB_STA_VBUS_STA	BIT(0)
+
+/* DRD_CON */
+#define DRD_CON_PERI_CON	BIT(24)
+
+/* USB_INT_ENA_1 and USB_INT_STA_1 */
+#define USB_INT_1_B3_PLLWKUP	BIT(31)
+#define USB_INT_1_B3_LUPSUCS	BIT(30)
+#define USB_INT_1_B3_DISABLE	BIT(27)
+#define USB_INT_1_B3_WRMRST	BIT(21)
+#define USB_INT_1_B3_HOTRST	BIT(20)
+#define USB_INT_1_B2_USBRST	BIT(12)
+#define USB_INT_1_B2_L1SPND	BIT(11)
+#define USB_INT_1_B2_SPND	BIT(9)
+#define USB_INT_1_B2_RSUM	BIT(8)
+#define USB_INT_1_SPEED		BIT(1)
+#define USB_INT_1_VBUS_CNG	BIT(0)
+
+/* USB_INT_ENA_2 and USB_INT_STA_2 */
+#define USB_INT_2_PIPE(n)	BIT(n)
+
+/* P0_MOD */
+#define P0_MOD_DIR		BIT(6)
+
+/* P0_CON and PN_CON */
+#define PX_CON_BYTE_EN_MASK		(BIT(10) | BIT(9))
+#define PX_CON_BYTE_EN_SHIFT		9
+#define PX_CON_BYTE_EN_BYTES(n)		(((n) << PX_CON_BYTE_EN_SHIFT) & \
+					 PX_CON_BYTE_EN_MASK)
+#define PX_CON_SEND			BIT(8)
+
+/* P0_CON */
+#define P0_CON_ST_RES_MASK		(BIT(27) | BIT(26))
+#define P0_CON_ST_RES_FORCE_STALL	BIT(27)
+#define P0_CON_ST_RES_NORMAL		BIT(26)
+#define P0_CON_ST_RES_FORCE_NRDY	0
+#define P0_CON_OT_RES_MASK		(BIT(25) | BIT(24))
+#define P0_CON_OT_RES_FORCE_STALL	BIT(25)
+#define P0_CON_OT_RES_NORMAL		BIT(24)
+#define P0_CON_OT_RES_FORCE_NRDY	0
+#define P0_CON_IN_RES_MASK		(BIT(17) | BIT(16))
+#define P0_CON_IN_RES_FORCE_STALL	BIT(17)
+#define P0_CON_IN_RES_NORMAL		BIT(16)
+#define P0_CON_IN_RES_FORCE_NRDY	0
+#define P0_CON_RES_WEN			BIT(7)
+#define P0_CON_BCLR			BIT(1)
+
+/* P0_STA and PN_STA */
+#define PX_STA_BUFSTS		BIT(0)
+
+/* P0_INT_ENA and P0_INT_STA */
+#define P0_INT_STSED		BIT(18)
+#define P0_INT_STSST		BIT(17)
+#define P0_INT_SETUP		BIT(16)
+#define P0_INT_RCVNL		BIT(8)
+#define P0_INT_ERDY		BIT(7)
+#define P0_INT_FLOW		BIT(6)
+#define P0_INT_STALL		BIT(2)
+#define P0_INT_NRDY		BIT(1)
+#define P0_INT_BFRDY		BIT(0)
+#define P0_INT_ALL_BITS		(P0_INT_STSED | P0_INT_SETUP | P0_INT_BFRDY)
+
+/* PN_MOD */
+#define PN_MOD_DIR		BIT(6)
+#define PN_MOD_TYPE_SHIFT	4
+#define PN_MOD_TYPE_MASK	GENMASK(5, PN_MOD_TYPE_SHIFT)
+#define PN_MOD_TYPE(n)		(((n) << PN_MOD_TYPE_SHIFT) & \
+				 PN_MOD_TYPE_MASK)
+#define PN_MOD_EPNUM_MASK	GENMASK(3, 0)
+#define PN_MOD_EPNUM(n)		((n) & PN_MOD_EPNUM_MASK)
+
+/* PN_RAMMAP */
+#define PN_RAMMAP_RAMAREA_SHIFT	29
+#define PN_RAMMAP_RAMAREA_MASK	GENMASK(31, PN_RAMMAP_RAMAREA_SHIFT)
+#define PN_RAMMAP_RAMAREA_16KB	BIT(31)
+#define PN_RAMMAP_RAMAREA_8KB	(BIT(30) | BIT(29))
+#define PN_RAMMAP_RAMAREA_4KB	BIT(30)
+#define PN_RAMMAP_RAMAREA_2KB	BIT(29)
+#define PN_RAMMAP_RAMAREA_1KB	0
+#define PN_RAMMAP_MPKT_SHIFT	16
+#define PN_RAMMAP_MPKT_MASK	GENMASK(26, PN_RAMMAP_MPKT_SHIFT)
+#define PN_RAMMAP_MPKT(n)	(((n) << PN_RAMMAP_MPKT_SHIFT) & \
+				 PN_RAMMAP_MPKT_MASK)
+#define PN_RAMMAP_RAMIF_SHIFT	14
+#define PN_RAMMAP_RAMIF_MASK	GENMASK(15, PN_RAMMAP_RAMIF_SHIFT)
+#define PN_RAMMAP_RAMIF(n)	(((n) << PN_RAMMAP_RAMIF_SHIFT) & \
+				 PN_RAMMAP_RAMIF_MASK)
+#define PN_RAMMAP_BASEAD_MASK	GENMASK(13, 0)
+#define PN_RAMMAP_BASEAD(offs)	(((offs) >> 3) & PN_RAMMAP_BASEAD_MASK)
+#define PN_RAMMAP_DATA(area, ramif, basead)	((PN_RAMMAP_##area) | \
+						 (PN_RAMMAP_RAMIF(ramif)) | \
+						 (PN_RAMMAP_BASEAD(basead)))
+
+/* PN_CON */
+#define PN_CON_EN		BIT(31)
+#define PN_CON_DATAIF_EN	BIT(30)
+#define PN_CON_RES_MASK		(BIT(17) | BIT(16))
+#define PN_CON_RES_FORCE_STALL	BIT(17)
+#define PN_CON_RES_NORMAL	BIT(16)
+#define PN_CON_RES_FORCE_NRDY	0
+#define PN_CON_LAST		BIT(11)
+#define PN_CON_RES_WEN		BIT(7)
+#define PN_CON_CLR		BIT(0)
+
+/* PN_INT_STA and PN_INT_ENA */
+#define PN_INT_LSTTR	BIT(4)
+#define PN_INT_BFRDY	BIT(0)
+
+/* USB3_SSIFCMD */
+#define SSIFCMD_URES_U2		BIT(9)
+#define SSIFCMD_URES_U1		BIT(8)
+#define SSIFCMD_UDIR_U2		BIT(7)
+#define SSIFCMD_UDIR_U1		BIT(6)
+#define SSIFCMD_UREQ_U2		BIT(5)
+#define SSIFCMD_UREQ_U1		BIT(4)
+
+#define USB3_EP0_SS_MAX_PACKET_SIZE	512
+#define USB3_EP0_HSFS_MAX_PACKET_SIZE	64
+#define USB3_EP0_BUF_SIZE		8
+#define USB3_MAX_NUM_PIPES		30
+#define USB3_WAIT_US			3
+
+struct renesas_usb3;
+struct renesas_usb3_request {
+	struct usb_request	req;
+	struct list_head	queue;
+};
+
+#define USB3_EP_NAME_SIZE	8
+struct renesas_usb3_ep {
+	struct usb_ep ep;
+	struct renesas_usb3 *usb3;
+	int num;
+	char ep_name[USB3_EP_NAME_SIZE];
+	struct list_head queue;
+	u32 rammap_val;
+	bool dir_in;
+	bool halt;
+	bool wedge;
+	bool started;
+};
+
+struct renesas_usb3_priv {
+	int ramsize_per_ramif;		/* unit = bytes */
+	int num_ramif;
+	int ramsize_per_pipe;		/* unit = bytes */
+	bool workaround_for_vbus;	/* if true, don't check vbus signal */
+};
+
+struct renesas_usb3 {
+	void __iomem *reg;
+
+	struct usb_gadget gadget;
+	struct usb_gadget_driver *driver;
+
+	struct renesas_usb3_ep *usb3_ep;
+	int num_usb3_eps;
+
+	spinlock_t lock;
+	int disabled_count;
+
+	struct usb_request *ep0_req;
+	u16 test_mode;
+	u8 ep0_buf[USB3_EP0_BUF_SIZE];
+	bool softconnect;
+	bool workaround_for_vbus;
+};
+
+#define gadget_to_renesas_usb3(_gadget)	\
+		container_of(_gadget, struct renesas_usb3, gadget)
+#define renesas_usb3_to_gadget(renesas_usb3) (&renesas_usb3->gadget)
+#define usb3_to_dev(_usb3)	(_usb3->gadget.dev.parent)
+
+#define usb_ep_to_usb3_ep(_ep) container_of(_ep, struct renesas_usb3_ep, ep)
+#define usb3_ep_to_usb3(_usb3_ep) (_usb3_ep->usb3)
+#define usb_req_to_usb3_req(_req) container_of(_req, \
+					    struct renesas_usb3_request, req)
+
+#define usb3_get_ep(usb3, n) ((usb3)->usb3_ep + (n))
+#define usb3_for_each_ep(usb3_ep, usb3, i)			\
+		for ((i) = 0, usb3_ep = usb3_get_ep(usb3, (i));	\
+		     (i) < (usb3)->num_usb3_eps;		\
+		     (i)++, usb3_ep = usb3_get_ep(usb3, (i)))
+
+static const char udc_name[] = "renesas_usb3";
+
+static void usb3_write(struct renesas_usb3 *usb3, u32 data, u32 offs)
+{
+	iowrite32(data, usb3->reg + offs);
+}
+
+static u32 usb3_read(struct renesas_usb3 *usb3, u32 offs)
+{
+	return ioread32(usb3->reg + offs);
+}
+
+static void usb3_set_bit(struct renesas_usb3 *usb3, u32 bits, u32 offs)
+{
+	u32 val = usb3_read(usb3, offs);
+
+	val |= bits;
+	usb3_write(usb3, val, offs);
+}
+
+static void usb3_clear_bit(struct renesas_usb3 *usb3, u32 bits, u32 offs)
+{
+	u32 val = usb3_read(usb3, offs);
+
+	val &= ~bits;
+	usb3_write(usb3, val, offs);
+}
+
+static int usb3_wait(struct renesas_usb3 *usb3, u32 reg, u32 mask,
+		     u32 expected)
+{
+	int i;
+
+	for (i = 0; i < USB3_WAIT_US; i++) {
+		if ((usb3_read(usb3, reg) & mask) == expected)
+			return 0;
+		udelay(1);
+	}
+
+	dev_dbg(usb3_to_dev(usb3), "%s: timed out (%8x, %08x, %08x)\n",
+		__func__, reg, mask, expected);
+
+	return -EBUSY;
+}
+
+static void usb3_enable_irq_1(struct renesas_usb3 *usb3, u32 bits)
+{
+	usb3_set_bit(usb3, bits, USB3_USB_INT_ENA_1);
+}
+
+static void usb3_disable_irq_1(struct renesas_usb3 *usb3, u32 bits)
+{
+	usb3_clear_bit(usb3, bits, USB3_USB_INT_ENA_1);
+}
+
+static void usb3_enable_pipe_irq(struct renesas_usb3 *usb3, int num)
+{
+	usb3_set_bit(usb3, USB_INT_2_PIPE(num), USB3_USB_INT_ENA_2);
+}
+
+static void usb3_disable_pipe_irq(struct renesas_usb3 *usb3, int num)
+{
+	usb3_clear_bit(usb3, USB_INT_2_PIPE(num), USB3_USB_INT_ENA_2);
+}
+
+static void usb3_init_axi_bridge(struct renesas_usb3 *usb3)
+{
+	/* Set AXI_INT */
+	usb3_write(usb3, ~0, USB3_DMA_INT_STA);
+	usb3_write(usb3, 0, USB3_DMA_INT_ENA);
+	usb3_set_bit(usb3, AXI_INT_DMAINT | AXI_INT_EPCINT, USB3_AXI_INT_ENA);
+}
+
+static void usb3_init_epc_registers(struct renesas_usb3 *usb3)
+{
+	/* FIXME: How to change host / peripheral mode as well? */
+	usb3_set_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON);
+
+	usb3_write(usb3, ~0, USB3_USB_INT_STA_1);
+	usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG);
+}
+
+static bool usb3_wakeup_usb2_phy(struct renesas_usb3 *usb3)
+{
+	if (!(usb3_read(usb3, USB3_USB20_CON) & USB20_CON_B2_SUSPEND))
+		return true;	/* already waked it up */
+
+	usb3_clear_bit(usb3, USB20_CON_B2_SUSPEND, USB3_USB20_CON);
+	usb3_enable_irq_1(usb3, USB_INT_1_B2_RSUM);
+
+	return false;
+}
+
+static void usb3_usb2_pullup(struct renesas_usb3 *usb3, int pullup)
+{
+	u32 bits = USB20_CON_B2_PUE | USB20_CON_B2_CONNECT;
+
+	if (usb3->softconnect && pullup)
+		usb3_set_bit(usb3, bits, USB3_USB20_CON);
+	else
+		usb3_clear_bit(usb3, bits, USB3_USB20_CON);
+}
+
+static void usb3_set_test_mode(struct renesas_usb3 *usb3)
+{
+	u32 val = usb3_read(usb3, USB3_USB20_CON);
+
+	val &= ~USB20_CON_B2_TSTMOD_MASK;
+	val |= USB20_CON_B2_TSTMOD(usb3->test_mode);
+	usb3_write(usb3, val | USB20_CON_B2_TSTMOD_EN, USB3_USB20_CON);
+	if (!usb3->test_mode)
+		usb3_clear_bit(usb3, USB20_CON_B2_TSTMOD_EN, USB3_USB20_CON);
+}
+
+static void usb3_start_usb2_connection(struct renesas_usb3 *usb3)
+{
+	usb3->disabled_count++;
+	usb3_set_bit(usb3, USB_COM_CON_EP0_EN, USB3_USB_COM_CON);
+	usb3_set_bit(usb3, USB_COM_CON_SPD_MODE, USB3_USB_COM_CON);
+	usb3_usb2_pullup(usb3, 1);
+}
+
+static int usb3_is_usb3_phy_in_u3(struct renesas_usb3 *usb3)
+{
+	return usb3_read(usb3, USB3_USB30_CON) & USB30_CON_POW_SEL_IN_U3;
+}
+
+static bool usb3_wakeup_usb3_phy(struct renesas_usb3 *usb3)
+{
+	if (!usb3_is_usb3_phy_in_u3(usb3))
+		return true;	/* already waked it up */
+
+	usb3_set_bit(usb3, USB30_CON_B3_PLLWAKE, USB3_USB30_CON);
+	usb3_enable_irq_1(usb3, USB_INT_1_B3_PLLWKUP);
+
+	return false;
+}
+
+static u16 usb3_feature_get_un_enabled(struct renesas_usb3 *usb3)
+{
+	u32 mask_u2 = SSIFCMD_UDIR_U2 | SSIFCMD_UREQ_U2;
+	u32 mask_u1 = SSIFCMD_UDIR_U1 | SSIFCMD_UREQ_U1;
+	u32 val = usb3_read(usb3, USB3_SSIFCMD);
+	u16 ret = 0;
+
+	/* Enables {U2,U1} if the bits of UDIR and UREQ are set to 0 */
+	if (!(val & mask_u2))
+		ret |= 1 << USB_DEV_STAT_U2_ENABLED;
+	if (!(val & mask_u1))
+		ret |= 1 << USB_DEV_STAT_U1_ENABLED;
+
+	return ret;
+}
+
+static void usb3_feature_u2_enable(struct renesas_usb3 *usb3, bool enable)
+{
+	u32 bits = SSIFCMD_UDIR_U2 | SSIFCMD_UREQ_U2;
+
+	/* Enables U2 if the bits of UDIR and UREQ are set to 0 */
+	if (enable)
+		usb3_clear_bit(usb3, bits, USB3_SSIFCMD);
+	else
+		usb3_set_bit(usb3, bits, USB3_SSIFCMD);
+}
+
+static void usb3_feature_u1_enable(struct renesas_usb3 *usb3, bool enable)
+{
+	u32 bits = SSIFCMD_UDIR_U1 | SSIFCMD_UREQ_U1;
+
+	/* Enables U1 if the bits of UDIR and UREQ are set to 0 */
+	if (enable)
+		usb3_clear_bit(usb3, bits, USB3_SSIFCMD);
+	else
+		usb3_set_bit(usb3, bits, USB3_SSIFCMD);
+}
+
+static void usb3_start_operation_for_usb3(struct renesas_usb3 *usb3)
+{
+	usb3_set_bit(usb3, USB_COM_CON_EP0_EN, USB3_USB_COM_CON);
+	usb3_clear_bit(usb3, USB_COM_CON_SPD_MODE, USB3_USB_COM_CON);
+	usb3_set_bit(usb3, USB30_CON_B3_CONNECT, USB3_USB30_CON);
+}
+
+static void usb3_start_usb3_connection(struct renesas_usb3 *usb3)
+{
+	usb3_start_operation_for_usb3(usb3);
+	usb3_set_bit(usb3, USB_COM_CON_RX_DETECTION, USB3_USB_COM_CON);
+
+	usb3_enable_irq_1(usb3, USB_INT_1_B3_LUPSUCS | USB_INT_1_B3_DISABLE |
+			  USB_INT_1_SPEED);
+}
+
+static void usb3_stop_usb3_connection(struct renesas_usb3 *usb3)
+{
+	usb3_clear_bit(usb3, USB30_CON_B3_CONNECT, USB3_USB30_CON);
+}
+
+static void usb3_transition_to_default_state(struct renesas_usb3 *usb3,
+					     bool is_usb3)
+{
+	usb3_set_bit(usb3, USB_INT_2_PIPE(0), USB3_USB_INT_ENA_2);
+	usb3_write(usb3, P0_INT_ALL_BITS, USB3_P0_INT_STA);
+	usb3_set_bit(usb3, P0_INT_ALL_BITS, USB3_P0_INT_ENA);
+
+	if (is_usb3)
+		usb3_enable_irq_1(usb3, USB_INT_1_B3_WRMRST |
+				  USB_INT_1_B3_HOTRST);
+	else
+		usb3_enable_irq_1(usb3, USB_INT_1_B2_SPND |
+				  USB_INT_1_B2_L1SPND | USB_INT_1_B2_USBRST);
+}
+
+static void usb3_connect(struct renesas_usb3 *usb3)
+{
+	if (usb3_wakeup_usb3_phy(usb3))
+		usb3_start_usb3_connection(usb3);
+}
+
+static void usb3_reset_epc(struct renesas_usb3 *usb3)
+{
+	usb3_clear_bit(usb3, USB_COM_CON_CONF, USB3_USB_COM_CON);
+	usb3_clear_bit(usb3, USB_COM_CON_EP0_EN, USB3_USB_COM_CON);
+	usb3_set_bit(usb3, USB_COM_CON_PIPE_CLR, USB3_USB_COM_CON);
+	usb3->test_mode = 0;
+	usb3_set_test_mode(usb3);
+}
+
+static void usb3_disconnect(struct renesas_usb3 *usb3)
+{
+	usb3->disabled_count = 0;
+	usb3_usb2_pullup(usb3, 0);
+	usb3_clear_bit(usb3, USB30_CON_B3_CONNECT, USB3_USB30_CON);
+	usb3_reset_epc(usb3);
+
+	if (usb3->driver)
+		usb3->driver->disconnect(&usb3->gadget);
+}
+
+static void usb3_check_vbus(struct renesas_usb3 *usb3)
+{
+	if (usb3->workaround_for_vbus) {
+		usb3_connect(usb3);
+	} else {
+		if (usb3_read(usb3, USB3_USB_STA) & USB_STA_VBUS_STA)
+			usb3_connect(usb3);
+		else
+			usb3_disconnect(usb3);
+	}
+}
+
+static void renesas_usb3_init_controller(struct renesas_usb3 *usb3)
+{
+	usb3_init_axi_bridge(usb3);
+	usb3_init_epc_registers(usb3);
+
+	usb3_check_vbus(usb3);
+}
+
+static void renesas_usb3_stop_controller(struct renesas_usb3 *usb3)
+{
+	usb3_disconnect(usb3);
+	usb3_write(usb3, 0, USB3_P0_INT_ENA);
+	usb3_write(usb3, 0, USB3_PN_INT_ENA);
+	usb3_write(usb3, 0, USB3_USB_INT_ENA_1);
+	usb3_write(usb3, 0, USB3_USB_INT_ENA_2);
+	usb3_write(usb3, 0, USB3_AXI_INT_ENA);
+}
+
+static void usb3_irq_epc_int_1_pll_wakeup(struct renesas_usb3 *usb3)
+{
+	usb3_disable_irq_1(usb3, USB_INT_1_B3_PLLWKUP);
+	usb3_clear_bit(usb3, USB30_CON_B3_PLLWAKE, USB3_USB30_CON);
+	usb3_start_usb3_connection(usb3);
+}
+
+static void usb3_irq_epc_int_1_linkup_success(struct renesas_usb3 *usb3)
+{
+	usb3_transition_to_default_state(usb3, true);
+}
+
+static void usb3_irq_epc_int_1_resume(struct renesas_usb3 *usb3)
+{
+	usb3_disable_irq_1(usb3, USB_INT_1_B2_RSUM);
+	usb3_start_usb2_connection(usb3);
+	usb3_transition_to_default_state(usb3, false);
+}
+
+static void usb3_irq_epc_int_1_disable(struct renesas_usb3 *usb3)
+{
+	usb3_stop_usb3_connection(usb3);
+	if (usb3_wakeup_usb2_phy(usb3))
+		usb3_irq_epc_int_1_resume(usb3);
+}
+
+static void usb3_irq_epc_int_1_bus_reset(struct renesas_usb3 *usb3)
+{
+	usb3_reset_epc(usb3);
+	if (usb3->disabled_count < 3)
+		usb3_start_usb3_connection(usb3);
+	else
+		usb3_start_usb2_connection(usb3);
+}
+
+static void usb3_irq_epc_int_1_vbus_change(struct renesas_usb3 *usb3)
+{
+	usb3_check_vbus(usb3);
+}
+
+static void usb3_irq_epc_int_1_hot_reset(struct renesas_usb3 *usb3)
+{
+	usb3_reset_epc(usb3);
+	usb3_set_bit(usb3, USB_COM_CON_EP0_EN, USB3_USB_COM_CON);
+
+	/* This bit shall be set within 12ms from the start of HotReset */
+	usb3_set_bit(usb3, USB30_CON_B3_HOTRST_CMP, USB3_USB30_CON);
+}
+
+static void usb3_irq_epc_int_1_warm_reset(struct renesas_usb3 *usb3)
+{
+	usb3_reset_epc(usb3);
+	usb3_set_bit(usb3, USB_COM_CON_EP0_EN, USB3_USB_COM_CON);
+
+	usb3_start_operation_for_usb3(usb3);
+	usb3_enable_irq_1(usb3, USB_INT_1_SPEED);
+}
+
+static void usb3_irq_epc_int_1_speed(struct renesas_usb3 *usb3)
+{
+	u32 speed = usb3_read(usb3, USB3_USB_STA) & USB_STA_SPEED_MASK;
+
+	switch (speed) {
+	case USB_STA_SPEED_SS:
+		usb3->gadget.speed = USB_SPEED_SUPER;
+		break;
+	case USB_STA_SPEED_HS:
+		usb3->gadget.speed = USB_SPEED_HIGH;
+		break;
+	case USB_STA_SPEED_FS:
+		usb3->gadget.speed = USB_SPEED_FULL;
+		break;
+	default:
+		usb3->gadget.speed = USB_SPEED_UNKNOWN;
+		break;
+	}
+}
+
+static void usb3_irq_epc_int_1(struct renesas_usb3 *usb3, u32 int_sta_1)
+{
+	if (int_sta_1 & USB_INT_1_B3_PLLWKUP)
+		usb3_irq_epc_int_1_pll_wakeup(usb3);
+
+	if (int_sta_1 & USB_INT_1_B3_LUPSUCS)
+		usb3_irq_epc_int_1_linkup_success(usb3);
+
+	if (int_sta_1 & USB_INT_1_B3_HOTRST)
+		usb3_irq_epc_int_1_hot_reset(usb3);
+
+	if (int_sta_1 & USB_INT_1_B3_WRMRST)
+		usb3_irq_epc_int_1_warm_reset(usb3);
+
+	if (int_sta_1 & USB_INT_1_B3_DISABLE)
+		usb3_irq_epc_int_1_disable(usb3);
+
+	if (int_sta_1 & USB_INT_1_B2_USBRST)
+		usb3_irq_epc_int_1_bus_reset(usb3);
+
+	if (int_sta_1 & USB_INT_1_B2_RSUM)
+		usb3_irq_epc_int_1_resume(usb3);
+
+	if (int_sta_1 & USB_INT_1_SPEED)
+		usb3_irq_epc_int_1_speed(usb3);
+
+	if (int_sta_1 & USB_INT_1_VBUS_CNG)
+		usb3_irq_epc_int_1_vbus_change(usb3);
+}
+
+static struct renesas_usb3_request *__usb3_get_request(struct renesas_usb3_ep
+						       *usb3_ep)
+{
+	return list_first_entry_or_null(&usb3_ep->queue,
+					struct renesas_usb3_request, queue);
+}
+
+static struct renesas_usb3_request *usb3_get_request(struct renesas_usb3_ep
+						     *usb3_ep)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	struct renesas_usb3_request *usb3_req;
+	unsigned long flags;
+
+	spin_lock_irqsave(&usb3->lock, flags);
+	usb3_req = __usb3_get_request(usb3_ep);
+	spin_unlock_irqrestore(&usb3->lock, flags);
+
+	return usb3_req;
+}
+
+static void usb3_request_done(struct renesas_usb3_ep *usb3_ep,
+			      struct renesas_usb3_request *usb3_req, int status)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	unsigned long flags;
+
+	dev_dbg(usb3_to_dev(usb3), "giveback: ep%2d, %u, %u, %d\n",
+		usb3_ep->num, usb3_req->req.length, usb3_req->req.actual,
+		status);
+	usb3_req->req.status = status;
+	spin_lock_irqsave(&usb3->lock, flags);
+	usb3_ep->started = false;
+	list_del_init(&usb3_req->queue);
+	spin_unlock_irqrestore(&usb3->lock, flags);
+	usb_gadget_giveback_request(&usb3_ep->ep, &usb3_req->req);
+}
+
+static void usb3_irq_epc_pipe0_status_end(struct renesas_usb3 *usb3)
+{
+	struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, 0);
+	struct renesas_usb3_request *usb3_req = usb3_get_request(usb3_ep);
+
+	if (usb3_req)
+		usb3_request_done(usb3_ep, usb3_req, 0);
+	if (usb3->test_mode)
+		usb3_set_test_mode(usb3);
+}
+
+static void usb3_get_setup_data(struct renesas_usb3 *usb3,
+				struct usb_ctrlrequest *ctrl)
+{
+	struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, 0);
+	u32 *data = (u32 *)ctrl;
+
+	*data++ = usb3_read(usb3, USB3_STUP_DAT_0);
+	*data = usb3_read(usb3, USB3_STUP_DAT_1);
+
+	/* update this driver's flag */
+	usb3_ep->dir_in = !!(ctrl->bRequestType & USB_DIR_IN);
+}
+
+static void usb3_set_p0_con_update_res(struct renesas_usb3 *usb3, u32 res)
+{
+	u32 val = usb3_read(usb3, USB3_P0_CON);
+
+	val &= ~(P0_CON_ST_RES_MASK | P0_CON_OT_RES_MASK | P0_CON_IN_RES_MASK);
+	val |= res | P0_CON_RES_WEN;
+	usb3_write(usb3, val, USB3_P0_CON);
+}
+
+static void usb3_set_p0_con_for_ctrl_read_data(struct renesas_usb3 *usb3)
+{
+	usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_FORCE_NRDY |
+				   P0_CON_OT_RES_FORCE_STALL |
+				   P0_CON_IN_RES_NORMAL);
+}
+
+static void usb3_set_p0_con_for_ctrl_read_status(struct renesas_usb3 *usb3)
+{
+	usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_NORMAL |
+				   P0_CON_OT_RES_FORCE_STALL |
+				   P0_CON_IN_RES_NORMAL);
+}
+
+static void usb3_set_p0_con_for_ctrl_write_data(struct renesas_usb3 *usb3)
+{
+	usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_FORCE_NRDY |
+				   P0_CON_OT_RES_NORMAL |
+				   P0_CON_IN_RES_FORCE_STALL);
+}
+
+static void usb3_set_p0_con_for_ctrl_write_status(struct renesas_usb3 *usb3)
+{
+	usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_NORMAL |
+				   P0_CON_OT_RES_NORMAL |
+				   P0_CON_IN_RES_FORCE_STALL);
+}
+
+static void usb3_set_p0_con_for_no_data(struct renesas_usb3 *usb3)
+{
+	usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_NORMAL |
+				   P0_CON_OT_RES_FORCE_STALL |
+				   P0_CON_IN_RES_FORCE_STALL);
+}
+
+static void usb3_set_p0_con_stall(struct renesas_usb3 *usb3)
+{
+	usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_FORCE_STALL |
+				   P0_CON_OT_RES_FORCE_STALL |
+				   P0_CON_IN_RES_FORCE_STALL);
+}
+
+static void usb3_set_p0_con_stop(struct renesas_usb3 *usb3)
+{
+	usb3_set_p0_con_update_res(usb3, P0_CON_ST_RES_FORCE_NRDY |
+				   P0_CON_OT_RES_FORCE_NRDY |
+				   P0_CON_IN_RES_FORCE_NRDY);
+}
+
+static int usb3_pn_change(struct renesas_usb3 *usb3, int num)
+{
+	if (num == 0 || num > usb3->num_usb3_eps)
+		return -ENXIO;
+
+	usb3_write(usb3, num, USB3_PIPE_COM);
+
+	return 0;
+}
+
+static void usb3_set_pn_con_update_res(struct renesas_usb3 *usb3, u32 res)
+{
+	u32 val = usb3_read(usb3, USB3_PN_CON);
+
+	val &= ~PN_CON_RES_MASK;
+	val |= res & PN_CON_RES_MASK;
+	val |= PN_CON_RES_WEN;
+	usb3_write(usb3, val, USB3_PN_CON);
+}
+
+static void usb3_pn_start(struct renesas_usb3 *usb3)
+{
+	usb3_set_pn_con_update_res(usb3, PN_CON_RES_NORMAL);
+}
+
+static void usb3_pn_stop(struct renesas_usb3 *usb3)
+{
+	usb3_set_pn_con_update_res(usb3, PN_CON_RES_FORCE_NRDY);
+}
+
+static void usb3_pn_stall(struct renesas_usb3 *usb3)
+{
+	usb3_set_pn_con_update_res(usb3, PN_CON_RES_FORCE_STALL);
+}
+
+static int usb3_pn_con_clear(struct renesas_usb3 *usb3)
+{
+	usb3_set_bit(usb3, PN_CON_CLR, USB3_PN_CON);
+
+	return usb3_wait(usb3, USB3_PN_CON, PN_CON_CLR, 0);
+}
+
+static bool usb3_is_transfer_complete(struct renesas_usb3_ep *usb3_ep,
+				      struct renesas_usb3_request *usb3_req)
+{
+	struct usb_request *req = &usb3_req->req;
+
+	if ((!req->zero && req->actual == req->length) ||
+	    (req->actual % usb3_ep->ep.maxpacket) || (req->length == 0))
+		return true;
+	else
+		return false;
+}
+
+static int usb3_wait_pipe_status(struct renesas_usb3_ep *usb3_ep, u32 mask)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	u32 sta_reg = usb3_ep->num ? USB3_PN_STA : USB3_P0_STA;
+
+	return usb3_wait(usb3, sta_reg, mask, mask);
+}
+
+static void usb3_set_px_con_send(struct renesas_usb3_ep *usb3_ep, int bytes,
+				 bool last)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	u32 con_reg = usb3_ep->num ? USB3_PN_CON : USB3_P0_CON;
+	u32 val = usb3_read(usb3, con_reg);
+
+	val |= PX_CON_SEND | PX_CON_BYTE_EN_BYTES(bytes);
+	val |= (usb3_ep->num && last) ? PN_CON_LAST : 0;
+	usb3_write(usb3, val, con_reg);
+}
+
+static int usb3_write_pipe(struct renesas_usb3_ep *usb3_ep,
+			   struct renesas_usb3_request *usb3_req,
+			   u32 fifo_reg)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	int i;
+	int len = min_t(unsigned, usb3_req->req.length - usb3_req->req.actual,
+			usb3_ep->ep.maxpacket);
+	u8 *buf = usb3_req->req.buf + usb3_req->req.actual;
+	u32 tmp = 0;
+	bool is_last;
+
+	if (usb3_wait_pipe_status(usb3_ep, PX_STA_BUFSTS) < 0)
+		return -EBUSY;
+
+	/* Update gadget driver parameter */
+	usb3_req->req.actual += len;
+
+	/* Write data to the register */
+	if (len >= 4) {
+		iowrite32_rep(usb3->reg + fifo_reg, buf, len / 4);
+		buf += (len / 4) * 4;
+		len %= 4;	/* update len to use usb3_set_pX_con_send() */
+	}
+
+	if (len) {
+		for (i = 0; i < len; i++)
+			tmp |= buf[i] << (8 * i);
+		usb3_write(usb3, tmp, fifo_reg);
+	}
+
+	is_last = usb3_is_transfer_complete(usb3_ep, usb3_req);
+	/* Send the data */
+	usb3_set_px_con_send(usb3_ep, len, is_last);
+
+	return is_last ? 0 : -EAGAIN;
+}
+
+static u32 usb3_get_received_length(struct renesas_usb3_ep *usb3_ep)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	u32 lng_reg = usb3_ep->num ? USB3_PN_LNG : USB3_P0_LNG;
+
+	return usb3_read(usb3, lng_reg);
+}
+
+static int usb3_read_pipe(struct renesas_usb3_ep *usb3_ep,
+			  struct renesas_usb3_request *usb3_req, u32 fifo_reg)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	int i;
+	int len = min_t(unsigned, usb3_req->req.length - usb3_req->req.actual,
+			usb3_get_received_length(usb3_ep));
+	u8 *buf = usb3_req->req.buf + usb3_req->req.actual;
+	u32 tmp = 0;
+
+	if (!len)
+		return 0;
+
+	/* Update gadget driver parameter */
+	usb3_req->req.actual += len;
+
+	/* Read data from the register */
+	if (len >= 4) {
+		ioread32_rep(usb3->reg + fifo_reg, buf, len / 4);
+		buf += (len / 4) * 4;
+		len %= 4;
+	}
+
+	if (len) {
+		tmp = usb3_read(usb3, fifo_reg);
+		for (i = 0; i < len; i++)
+			buf[i] = (tmp >> (8 * i)) & 0xff;
+	}
+
+	return usb3_is_transfer_complete(usb3_ep, usb3_req) ? 0 : -EAGAIN;
+}
+
+static void usb3_set_status_stage(struct renesas_usb3_ep *usb3_ep,
+				  struct renesas_usb3_request *usb3_req)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+
+	if (usb3_ep->dir_in) {
+		usb3_set_p0_con_for_ctrl_read_status(usb3);
+	} else {
+		if (!usb3_req->req.length)
+			usb3_set_p0_con_for_no_data(usb3);
+		else
+			usb3_set_p0_con_for_ctrl_write_status(usb3);
+	}
+}
+
+static void usb3_p0_xfer(struct renesas_usb3_ep *usb3_ep,
+			 struct renesas_usb3_request *usb3_req)
+{
+	int ret = -EAGAIN;
+
+	if (usb3_ep->dir_in)
+		ret = usb3_write_pipe(usb3_ep, usb3_req, USB3_P0_WRITE);
+	else
+		ret = usb3_read_pipe(usb3_ep, usb3_req, USB3_P0_READ);
+
+	if (!ret)
+		usb3_set_status_stage(usb3_ep, usb3_req);
+}
+
+static void usb3_start_pipe0(struct renesas_usb3_ep *usb3_ep,
+			     struct renesas_usb3_request *usb3_req)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+
+	if (usb3_ep->started)
+		return;
+
+	usb3_ep->started = true;
+
+	if (usb3_ep->dir_in) {
+		usb3_set_bit(usb3, P0_MOD_DIR, USB3_P0_MOD);
+		usb3_set_p0_con_for_ctrl_read_data(usb3);
+	} else {
+		usb3_clear_bit(usb3, P0_MOD_DIR, USB3_P0_MOD);
+		usb3_set_p0_con_for_ctrl_write_data(usb3);
+	}
+
+	usb3_p0_xfer(usb3_ep, usb3_req);
+}
+
+static void usb3_start_pipen(struct renesas_usb3_ep *usb3_ep,
+			     struct renesas_usb3_request *usb3_req)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	struct renesas_usb3_request *usb3_req_first = usb3_get_request(usb3_ep);
+	unsigned long flags;
+	int ret = -EAGAIN;
+	u32 enable_bits = 0;
+
+	if (usb3_ep->halt || usb3_ep->started)
+		return;
+	if (usb3_req != usb3_req_first)
+		return;
+
+	spin_lock_irqsave(&usb3->lock, flags);
+	if (usb3_pn_change(usb3, usb3_ep->num) < 0)
+		goto out;
+
+	usb3_ep->started = true;
+	usb3_pn_start(usb3);
+
+	if (usb3_ep->dir_in) {
+		ret = usb3_write_pipe(usb3_ep, usb3_req, USB3_PN_WRITE);
+		enable_bits |= PN_INT_LSTTR;
+	}
+
+	if (ret < 0)
+		enable_bits |= PN_INT_BFRDY;
+
+	if (enable_bits) {
+		usb3_set_bit(usb3, enable_bits, USB3_PN_INT_ENA);
+		usb3_enable_pipe_irq(usb3, usb3_ep->num);
+	}
+out:
+	spin_unlock_irqrestore(&usb3->lock, flags);
+}
+
+static int renesas_usb3_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+				 gfp_t gfp_flags)
+{
+	struct renesas_usb3_ep *usb3_ep = usb_ep_to_usb3_ep(_ep);
+	struct renesas_usb3_request *usb3_req = usb_req_to_usb3_req(_req);
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	unsigned long flags;
+
+	dev_dbg(usb3_to_dev(usb3), "ep_queue: ep%2d, %u\n", usb3_ep->num,
+		_req->length);
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+	spin_lock_irqsave(&usb3->lock, flags);
+	list_add_tail(&usb3_req->queue, &usb3_ep->queue);
+	spin_unlock_irqrestore(&usb3->lock, flags);
+
+	if (!usb3_ep->num)
+		usb3_start_pipe0(usb3_ep, usb3_req);
+	else
+		usb3_start_pipen(usb3_ep, usb3_req);
+
+	return 0;
+}
+
+static void usb3_set_device_address(struct renesas_usb3 *usb3, u16 addr)
+{
+	/* DEV_ADDR bit field is cleared by WarmReset, HotReset and BusReset */
+	usb3_set_bit(usb3, USB_COM_CON_DEV_ADDR(addr), USB3_USB_COM_CON);
+}
+
+static bool usb3_std_req_set_address(struct renesas_usb3 *usb3,
+				     struct usb_ctrlrequest *ctrl)
+{
+	if (ctrl->wValue >= 128)
+		return true;	/* stall */
+
+	usb3_set_device_address(usb3, ctrl->wValue);
+	usb3_set_p0_con_for_no_data(usb3);
+
+	return false;
+}
+
+static void usb3_pipe0_internal_xfer(struct renesas_usb3 *usb3,
+				     void *tx_data, size_t len,
+				     void (*complete)(struct usb_ep *ep,
+						      struct usb_request *req))
+{
+	struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, 0);
+
+	if (tx_data)
+		memcpy(usb3->ep0_buf, tx_data,
+		       min_t(size_t, len, USB3_EP0_BUF_SIZE));
+
+	usb3->ep0_req->buf = &usb3->ep0_buf;
+	usb3->ep0_req->length = len;
+	usb3->ep0_req->complete = complete;
+	renesas_usb3_ep_queue(&usb3_ep->ep, usb3->ep0_req, GFP_ATOMIC);
+}
+
+static void usb3_pipe0_get_status_completion(struct usb_ep *ep,
+					     struct usb_request *req)
+{
+}
+
+static bool usb3_std_req_get_status(struct renesas_usb3 *usb3,
+				    struct usb_ctrlrequest *ctrl)
+{
+	bool stall = false;
+	struct renesas_usb3_ep *usb3_ep;
+	int num;
+	u16 status = 0;
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		if (usb3->gadget.is_selfpowered)
+			status |= 1 << USB_DEVICE_SELF_POWERED;
+		if (usb3->gadget.speed == USB_SPEED_SUPER)
+			status |= usb3_feature_get_un_enabled(usb3);
+		break;
+	case USB_RECIP_INTERFACE:
+		break;
+	case USB_RECIP_ENDPOINT:
+		num = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK;
+		usb3_ep = usb3_get_ep(usb3, num);
+		if (usb3_ep->halt)
+			status |= 1 << USB_ENDPOINT_HALT;
+		break;
+	default:
+		stall = true;
+		break;
+	}
+
+	if (!stall) {
+		status = cpu_to_le16(status);
+		dev_dbg(usb3_to_dev(usb3), "get_status: req = %p\n",
+			usb_req_to_usb3_req(usb3->ep0_req));
+		usb3_pipe0_internal_xfer(usb3, &status, sizeof(status),
+					 usb3_pipe0_get_status_completion);
+	}
+
+	return stall;
+}
+
+static bool usb3_std_req_feature_device(struct renesas_usb3 *usb3,
+					struct usb_ctrlrequest *ctrl, bool set)
+{
+	bool stall = true;
+	u16 w_value = le16_to_cpu(ctrl->wValue);
+
+	switch (w_value) {
+	case USB_DEVICE_TEST_MODE:
+		if (!set)
+			break;
+		usb3->test_mode = le16_to_cpu(ctrl->wIndex) >> 8;
+		stall = false;
+		break;
+	case USB_DEVICE_U1_ENABLE:
+	case USB_DEVICE_U2_ENABLE:
+		if (usb3->gadget.speed != USB_SPEED_SUPER)
+			break;
+		if (w_value == USB_DEVICE_U1_ENABLE)
+			usb3_feature_u1_enable(usb3, set);
+		if (w_value == USB_DEVICE_U2_ENABLE)
+			usb3_feature_u2_enable(usb3, set);
+		stall = false;
+		break;
+	default:
+		break;
+	}
+
+	return stall;
+}
+
+static int usb3_set_halt_p0(struct renesas_usb3_ep *usb3_ep, bool halt)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+
+	if (unlikely(usb3_ep->num))
+		return -EINVAL;
+
+	usb3_ep->halt = halt;
+	if (halt)
+		usb3_set_p0_con_stall(usb3);
+	else
+		usb3_set_p0_con_stop(usb3);
+
+	return 0;
+}
+
+static int usb3_set_halt_pn(struct renesas_usb3_ep *usb3_ep, bool halt,
+			    bool is_clear_feature)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	unsigned long flags;
+
+	spin_lock_irqsave(&usb3->lock, flags);
+	if (!usb3_pn_change(usb3, usb3_ep->num)) {
+		usb3_ep->halt = halt;
+		if (halt) {
+			usb3_pn_stall(usb3);
+		} else if (!is_clear_feature || !usb3_ep->wedge) {
+			usb3_pn_con_clear(usb3);
+			usb3_set_bit(usb3, PN_CON_EN, USB3_PN_CON);
+			usb3_pn_stop(usb3);
+		}
+	}
+	spin_unlock_irqrestore(&usb3->lock, flags);
+
+	return 0;
+}
+
+static int usb3_set_halt(struct renesas_usb3_ep *usb3_ep, bool halt,
+			 bool is_clear_feature)
+{
+	int ret = 0;
+
+	if (halt && usb3_ep->started)
+		return -EAGAIN;
+
+	if (usb3_ep->num)
+		ret = usb3_set_halt_pn(usb3_ep, halt, is_clear_feature);
+	else
+		ret = usb3_set_halt_p0(usb3_ep, halt);
+
+	return ret;
+}
+
+static bool usb3_std_req_feature_endpoint(struct renesas_usb3 *usb3,
+					  struct usb_ctrlrequest *ctrl,
+					  bool set)
+{
+	int num = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK;
+	struct renesas_usb3_ep *usb3_ep;
+	struct renesas_usb3_request *usb3_req;
+
+	if (le16_to_cpu(ctrl->wValue) != USB_ENDPOINT_HALT)
+		return true;	/* stall */
+
+	usb3_ep = usb3_get_ep(usb3, num);
+	usb3_set_halt(usb3_ep, set, true);
+
+	/* Restarts a queue if clear feature */
+	if (!set) {
+		usb3_ep->started = false;
+		usb3_req = usb3_get_request(usb3_ep);
+		if (usb3_req)
+			usb3_start_pipen(usb3_ep, usb3_req);
+	}
+
+	return false;
+}
+
+static bool usb3_std_req_feature(struct renesas_usb3 *usb3,
+				 struct usb_ctrlrequest *ctrl, bool set)
+{
+	bool stall = false;
+
+	switch (ctrl->bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		stall = usb3_std_req_feature_device(usb3, ctrl, set);
+		break;
+	case USB_RECIP_INTERFACE:
+		break;
+	case USB_RECIP_ENDPOINT:
+		stall = usb3_std_req_feature_endpoint(usb3, ctrl, set);
+		break;
+	default:
+		stall = true;
+		break;
+	}
+
+	if (!stall)
+		usb3_set_p0_con_for_no_data(usb3);
+
+	return stall;
+}
+
+static void usb3_pipe0_set_sel_completion(struct usb_ep *ep,
+					  struct usb_request *req)
+{
+	/* TODO */
+}
+
+static bool usb3_std_req_set_sel(struct renesas_usb3 *usb3,
+				 struct usb_ctrlrequest *ctrl)
+{
+	u16 w_length = le16_to_cpu(ctrl->wLength);
+
+	if (w_length != 6)
+		return true;	/* stall */
+
+	dev_dbg(usb3_to_dev(usb3), "set_sel: req = %p\n",
+		usb_req_to_usb3_req(usb3->ep0_req));
+	usb3_pipe0_internal_xfer(usb3, NULL, 6, usb3_pipe0_set_sel_completion);
+
+	return false;
+}
+
+static bool usb3_std_req_set_configuration(struct renesas_usb3 *usb3,
+					   struct usb_ctrlrequest *ctrl)
+{
+	if (ctrl->wValue > 0)
+		usb3_set_bit(usb3, USB_COM_CON_CONF, USB3_USB_COM_CON);
+	else
+		usb3_clear_bit(usb3, USB_COM_CON_CONF, USB3_USB_COM_CON);
+
+	return false;
+}
+
+/**
+ * usb3_handle_standard_request - handle some standard requests
+ * @usb3: the renesas_usb3 pointer
+ * @ctrl: a pointer of setup data
+ *
+ * Returns true if this function handled a standard request
+ */
+static bool usb3_handle_standard_request(struct renesas_usb3 *usb3,
+					 struct usb_ctrlrequest *ctrl)
+{
+	bool ret = false;
+	bool stall = false;
+
+	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (ctrl->bRequest) {
+		case USB_REQ_SET_ADDRESS:
+			stall = usb3_std_req_set_address(usb3, ctrl);
+			ret = true;
+			break;
+		case USB_REQ_GET_STATUS:
+			stall = usb3_std_req_get_status(usb3, ctrl);
+			ret = true;
+			break;
+		case USB_REQ_CLEAR_FEATURE:
+			stall = usb3_std_req_feature(usb3, ctrl, false);
+			ret = true;
+			break;
+		case USB_REQ_SET_FEATURE:
+			stall = usb3_std_req_feature(usb3, ctrl, true);
+			ret = true;
+			break;
+		case USB_REQ_SET_SEL:
+			stall = usb3_std_req_set_sel(usb3, ctrl);
+			ret = true;
+			break;
+		case USB_REQ_SET_ISOCH_DELAY:
+			/* This hardware doesn't support Isochronous xfer */
+			stall = true;
+			ret = true;
+			break;
+		case USB_REQ_SET_CONFIGURATION:
+			usb3_std_req_set_configuration(usb3, ctrl);
+			break;
+		default:
+			break;
+		}
+	}
+
+	if (stall)
+		usb3_set_p0_con_stall(usb3);
+
+	return ret;
+}
+
+static int usb3_p0_con_clear_buffer(struct renesas_usb3 *usb3)
+{
+	usb3_set_bit(usb3, P0_CON_BCLR, USB3_P0_CON);
+
+	return usb3_wait(usb3, USB3_P0_CON, P0_CON_BCLR, 0);
+}
+
+static void usb3_irq_epc_pipe0_setup(struct renesas_usb3 *usb3)
+{
+	struct usb_ctrlrequest ctrl;
+	struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, 0);
+
+	/* Call giveback function if previous transfer is not completed */
+	if (usb3_ep->started)
+		usb3_request_done(usb3_ep, usb3_get_request(usb3_ep),
+				  -ECONNRESET);
+
+	usb3_p0_con_clear_buffer(usb3);
+	usb3_get_setup_data(usb3, &ctrl);
+	if (!usb3_handle_standard_request(usb3, &ctrl))
+		if (usb3->driver->setup(&usb3->gadget, &ctrl) < 0)
+			usb3_set_p0_con_stall(usb3);
+}
+
+static void usb3_irq_epc_pipe0_bfrdy(struct renesas_usb3 *usb3)
+{
+	struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, 0);
+	struct renesas_usb3_request *usb3_req = usb3_get_request(usb3_ep);
+
+	if (!usb3_req)
+		return;
+
+	usb3_p0_xfer(usb3_ep, usb3_req);
+}
+
+static void usb3_irq_epc_pipe0(struct renesas_usb3 *usb3)
+{
+	u32 p0_int_sta = usb3_read(usb3, USB3_P0_INT_STA);
+
+	p0_int_sta &= usb3_read(usb3, USB3_P0_INT_ENA);
+	usb3_write(usb3, p0_int_sta, USB3_P0_INT_STA);
+	if (p0_int_sta & P0_INT_STSED)
+		usb3_irq_epc_pipe0_status_end(usb3);
+	if (p0_int_sta & P0_INT_SETUP)
+		usb3_irq_epc_pipe0_setup(usb3);
+	if (p0_int_sta & P0_INT_BFRDY)
+		usb3_irq_epc_pipe0_bfrdy(usb3);
+}
+
+static void usb3_request_done_pipen(struct renesas_usb3 *usb3,
+				    struct renesas_usb3_ep *usb3_ep,
+				    struct renesas_usb3_request *usb3_req,
+				    int status)
+{
+	usb3_pn_stop(usb3);
+	usb3_disable_pipe_irq(usb3, usb3_ep->num);
+	usb3_request_done(usb3_ep, usb3_req, status);
+
+	/* get next usb3_req */
+	usb3_req = usb3_get_request(usb3_ep);
+	if (usb3_req)
+		usb3_start_pipen(usb3_ep, usb3_req);
+}
+
+static void usb3_irq_epc_pipen_lsttr(struct renesas_usb3 *usb3, int num)
+{
+	struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, num);
+	struct renesas_usb3_request *usb3_req = usb3_get_request(usb3_ep);
+
+	if (!usb3_req)
+		return;
+
+	if (usb3_ep->dir_in) {
+		dev_dbg(usb3_to_dev(usb3), "%s: len = %u, actual = %u\n",
+			__func__, usb3_req->req.length, usb3_req->req.actual);
+		usb3_request_done_pipen(usb3, usb3_ep, usb3_req, 0);
+	}
+}
+
+static void usb3_irq_epc_pipen_bfrdy(struct renesas_usb3 *usb3, int num)
+{
+	struct renesas_usb3_ep *usb3_ep = usb3_get_ep(usb3, num);
+	struct renesas_usb3_request *usb3_req = usb3_get_request(usb3_ep);
+
+	if (!usb3_req)
+		return;
+
+	if (usb3_ep->dir_in) {
+		/* Do not stop the IN pipe here to detect LSTTR interrupt */
+		if (!usb3_write_pipe(usb3_ep, usb3_req, USB3_PN_WRITE))
+			usb3_clear_bit(usb3, PN_INT_BFRDY, USB3_PN_INT_ENA);
+	} else {
+		if (!usb3_read_pipe(usb3_ep, usb3_req, USB3_PN_READ))
+			usb3_request_done_pipen(usb3, usb3_ep, usb3_req, 0);
+	}
+}
+
+static void usb3_irq_epc_pipen(struct renesas_usb3 *usb3, int num)
+{
+	u32 pn_int_sta;
+
+	if (usb3_pn_change(usb3, num) < 0)
+		return;
+
+	pn_int_sta = usb3_read(usb3, USB3_PN_INT_STA);
+	pn_int_sta &= usb3_read(usb3, USB3_PN_INT_ENA);
+	usb3_write(usb3, pn_int_sta, USB3_PN_INT_STA);
+	if (pn_int_sta & PN_INT_LSTTR)
+		usb3_irq_epc_pipen_lsttr(usb3, num);
+	if (pn_int_sta & PN_INT_BFRDY)
+		usb3_irq_epc_pipen_bfrdy(usb3, num);
+}
+
+static void usb3_irq_epc_int_2(struct renesas_usb3 *usb3, u32 int_sta_2)
+{
+	int i;
+
+	for (i = 0; i < usb3->num_usb3_eps; i++) {
+		if (int_sta_2 & USB_INT_2_PIPE(i)) {
+			if (!i)
+				usb3_irq_epc_pipe0(usb3);
+			else
+				usb3_irq_epc_pipen(usb3, i);
+		}
+	}
+}
+
+static void usb3_irq_epc(struct renesas_usb3 *usb3)
+{
+	u32 int_sta_1 = usb3_read(usb3, USB3_USB_INT_STA_1);
+	u32 int_sta_2 = usb3_read(usb3, USB3_USB_INT_STA_2);
+
+	int_sta_1 &= usb3_read(usb3, USB3_USB_INT_ENA_1);
+	if (int_sta_1) {
+		usb3_write(usb3, int_sta_1, USB3_USB_INT_STA_1);
+		usb3_irq_epc_int_1(usb3, int_sta_1);
+	}
+
+	int_sta_2 &= usb3_read(usb3, USB3_USB_INT_ENA_2);
+	if (int_sta_2)
+		usb3_irq_epc_int_2(usb3, int_sta_2);
+}
+
+static irqreturn_t renesas_usb3_irq(int irq, void *_usb3)
+{
+	struct renesas_usb3 *usb3 = _usb3;
+	irqreturn_t ret = IRQ_NONE;
+	u32 axi_int_sta = usb3_read(usb3, USB3_AXI_INT_STA);
+
+	if (axi_int_sta & AXI_INT_EPCINT) {
+		usb3_irq_epc(usb3);
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
+static void usb3_write_pn_mod(struct renesas_usb3_ep *usb3_ep,
+			      const struct usb_endpoint_descriptor *desc)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	u32 val = 0;
+
+	val |= usb3_ep->dir_in ? PN_MOD_DIR : 0;
+	val |= PN_MOD_TYPE(usb_endpoint_type(desc));
+	val |= PN_MOD_EPNUM(usb_endpoint_num(desc));
+	usb3_write(usb3, val, USB3_PN_MOD);
+}
+
+static u32 usb3_calc_ramarea(int ram_size)
+{
+	WARN_ON(ram_size > SZ_16K);
+
+	if (ram_size <= SZ_1K)
+		return PN_RAMMAP_RAMAREA_1KB;
+	else if (ram_size <= SZ_2K)
+		return PN_RAMMAP_RAMAREA_2KB;
+	else if (ram_size <= SZ_4K)
+		return PN_RAMMAP_RAMAREA_4KB;
+	else if (ram_size <= SZ_8K)
+		return PN_RAMMAP_RAMAREA_8KB;
+	else
+		return PN_RAMMAP_RAMAREA_16KB;
+}
+
+static u32 usb3_calc_rammap_val(struct renesas_usb3_ep *usb3_ep,
+				const struct usb_endpoint_descriptor *desc)
+{
+	return usb3_ep->rammap_val | PN_RAMMAP_MPKT(usb_endpoint_maxp(desc));
+}
+
+static int usb3_enable_pipe_n(struct renesas_usb3_ep *usb3_ep,
+			      const struct usb_endpoint_descriptor *desc)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	unsigned long flags;
+
+	usb3_ep->dir_in = usb_endpoint_dir_in(desc);
+
+	spin_lock_irqsave(&usb3->lock, flags);
+	if (!usb3_pn_change(usb3, usb3_ep->num)) {
+		usb3_write_pn_mod(usb3_ep, desc);
+		usb3_write(usb3, usb3_calc_rammap_val(usb3_ep, desc),
+			   USB3_PN_RAMMAP);
+		usb3_pn_con_clear(usb3);
+		usb3_set_bit(usb3, PN_CON_EN, USB3_PN_CON);
+	}
+	spin_unlock_irqrestore(&usb3->lock, flags);
+
+	return 0;
+}
+
+static int usb3_disable_pipe_n(struct renesas_usb3_ep *usb3_ep)
+{
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	unsigned long flags;
+
+	usb3_ep->halt = false;
+
+	spin_lock_irqsave(&usb3->lock, flags);
+	if (!usb3_pn_change(usb3, usb3_ep->num)) {
+		usb3_write(usb3, 0, USB3_PN_RAMMAP);
+		usb3_clear_bit(usb3, PN_CON_EN, USB3_PN_CON);
+	}
+	spin_unlock_irqrestore(&usb3->lock, flags);
+
+	return 0;
+}
+
+/*------- usb_ep_ops -----------------------------------------------------*/
+static int renesas_usb3_ep_enable(struct usb_ep *_ep,
+				  const struct usb_endpoint_descriptor *desc)
+{
+	struct renesas_usb3_ep *usb3_ep = usb_ep_to_usb3_ep(_ep);
+
+	return usb3_enable_pipe_n(usb3_ep, desc);
+}
+
+static int renesas_usb3_ep_disable(struct usb_ep *_ep)
+{
+	struct renesas_usb3_ep *usb3_ep = usb_ep_to_usb3_ep(_ep);
+	struct renesas_usb3_request *usb3_req;
+
+	do {
+		usb3_req = usb3_get_request(usb3_ep);
+		if (!usb3_req)
+			break;
+		usb3_request_done(usb3_ep, usb3_req, -ESHUTDOWN);
+	} while (1);
+
+	return usb3_disable_pipe_n(usb3_ep);
+}
+
+static struct usb_request *__renesas_usb3_ep_alloc_request(gfp_t gfp_flags)
+{
+	struct renesas_usb3_request *usb3_req;
+
+	usb3_req = kzalloc(sizeof(struct renesas_usb3_request), gfp_flags);
+	if (!usb3_req)
+		return NULL;
+
+	INIT_LIST_HEAD(&usb3_req->queue);
+
+	return &usb3_req->req;
+}
+
+static void __renesas_usb3_ep_free_request(struct usb_request *_req)
+{
+	struct renesas_usb3_request *usb3_req = usb_req_to_usb3_req(_req);
+
+	kfree(usb3_req);
+}
+
+static struct usb_request *renesas_usb3_ep_alloc_request(struct usb_ep *_ep,
+							 gfp_t gfp_flags)
+{
+	return __renesas_usb3_ep_alloc_request(gfp_flags);
+}
+
+static void renesas_usb3_ep_free_request(struct usb_ep *_ep,
+					 struct usb_request *_req)
+{
+	__renesas_usb3_ep_free_request(_req);
+}
+
+static int renesas_usb3_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct renesas_usb3_ep *usb3_ep = usb_ep_to_usb3_ep(_ep);
+	struct renesas_usb3_request *usb3_req = usb_req_to_usb3_req(_req);
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+
+	dev_dbg(usb3_to_dev(usb3), "ep_dequeue: ep%2d, %u\n", usb3_ep->num,
+		_req->length);
+
+	usb3_request_done_pipen(usb3, usb3_ep, usb3_req, -ECONNRESET);
+
+	return 0;
+}
+
+static int renesas_usb3_ep_set_halt(struct usb_ep *_ep, int value)
+{
+	return usb3_set_halt(usb_ep_to_usb3_ep(_ep), !!value, false);
+}
+
+static int renesas_usb3_ep_set_wedge(struct usb_ep *_ep)
+{
+	struct renesas_usb3_ep *usb3_ep = usb_ep_to_usb3_ep(_ep);
+
+	usb3_ep->wedge = true;
+	return usb3_set_halt(usb3_ep, true, false);
+}
+
+static void renesas_usb3_ep_fifo_flush(struct usb_ep *_ep)
+{
+	struct renesas_usb3_ep *usb3_ep = usb_ep_to_usb3_ep(_ep);
+	struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep);
+	unsigned long flags;
+
+	if (usb3_ep->num) {
+		spin_lock_irqsave(&usb3->lock, flags);
+		if (!usb3_pn_change(usb3, usb3_ep->num)) {
+			usb3_pn_con_clear(usb3);
+			usb3_set_bit(usb3, PN_CON_EN, USB3_PN_CON);
+		}
+		spin_unlock_irqrestore(&usb3->lock, flags);
+	} else {
+		usb3_p0_con_clear_buffer(usb3);
+	}
+}
+
+static struct usb_ep_ops renesas_usb3_ep_ops = {
+	.enable		= renesas_usb3_ep_enable,
+	.disable	= renesas_usb3_ep_disable,
+
+	.alloc_request	= renesas_usb3_ep_alloc_request,
+	.free_request	= renesas_usb3_ep_free_request,
+
+	.queue		= renesas_usb3_ep_queue,
+	.dequeue	= renesas_usb3_ep_dequeue,
+
+	.set_halt	= renesas_usb3_ep_set_halt,
+	.set_wedge	= renesas_usb3_ep_set_wedge,
+	.fifo_flush	= renesas_usb3_ep_fifo_flush,
+};
+
+/*------- usb_gadget_ops -------------------------------------------------*/
+static int renesas_usb3_start(struct usb_gadget *gadget,
+			      struct usb_gadget_driver *driver)
+{
+	struct renesas_usb3 *usb3;
+
+	if (!driver || driver->max_speed < USB_SPEED_FULL ||
+	    !driver->setup)
+		return -EINVAL;
+
+	usb3 = gadget_to_renesas_usb3(gadget);
+
+	/* hook up the driver */
+	usb3->driver = driver;
+
+	renesas_usb3_init_controller(usb3);
+
+	return 0;
+}
+
+static int renesas_usb3_stop(struct usb_gadget *gadget)
+{
+	struct renesas_usb3 *usb3 = gadget_to_renesas_usb3(gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&usb3->lock, flags);
+	usb3->softconnect = false;
+	usb3->gadget.speed = USB_SPEED_UNKNOWN;
+	usb3->driver = NULL;
+	renesas_usb3_stop_controller(usb3);
+	spin_unlock_irqrestore(&usb3->lock, flags);
+
+	return 0;
+}
+
+static int renesas_usb3_get_frame(struct usb_gadget *_gadget)
+{
+	return -EOPNOTSUPP;
+}
+
+static int renesas_usb3_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct renesas_usb3 *usb3 = gadget_to_renesas_usb3(gadget);
+
+	usb3->softconnect = !!is_on;
+
+	return 0;
+}
+
+static int renesas_usb3_set_selfpowered(struct usb_gadget *gadget, int is_self)
+{
+	gadget->is_selfpowered = !!is_self;
+
+	return 0;
+}
+
+static const struct usb_gadget_ops renesas_usb3_gadget_ops = {
+	.get_frame		= renesas_usb3_get_frame,
+	.udc_start		= renesas_usb3_start,
+	.udc_stop		= renesas_usb3_stop,
+	.pullup			= renesas_usb3_pullup,
+	.set_selfpowered	= renesas_usb3_set_selfpowered,
+};
+
+/*------- platform_driver ------------------------------------------------*/
+static int renesas_usb3_remove(struct platform_device *pdev)
+{
+	struct renesas_usb3 *usb3 = platform_get_drvdata(pdev);
+
+	pm_runtime_put(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	usb_del_gadget_udc(&usb3->gadget);
+
+	__renesas_usb3_ep_free_request(usb3->ep0_req);
+
+	return 0;
+}
+
+static int renesas_usb3_init_ep(struct renesas_usb3 *usb3, struct device *dev,
+				const struct renesas_usb3_priv *priv)
+{
+	struct renesas_usb3_ep *usb3_ep;
+	int i;
+
+	/* calculate num_usb3_eps from renesas_usb3_priv */
+	usb3->num_usb3_eps = priv->ramsize_per_ramif * priv->num_ramif * 2 /
+			     priv->ramsize_per_pipe + 1;
+
+	if (usb3->num_usb3_eps > USB3_MAX_NUM_PIPES)
+		usb3->num_usb3_eps = USB3_MAX_NUM_PIPES;
+
+	usb3->usb3_ep = devm_kzalloc(dev, sizeof(*usb3_ep) * usb3->num_usb3_eps,
+				     GFP_KERNEL);
+	if (!usb3->usb3_ep)
+		return -ENOMEM;
+
+	dev_dbg(dev, "%s: num_usb3_eps = %d\n", __func__, usb3->num_usb3_eps);
+	/*
+	 * This driver prepares pipes as the followings:
+	 *  - odd pipes = IN pipe
+	 *  - even pipes = OUT pipe (except pipe 0)
+	 */
+	usb3_for_each_ep(usb3_ep, usb3, i) {
+		snprintf(usb3_ep->ep_name, sizeof(usb3_ep->ep_name), "ep%d", i);
+		usb3_ep->usb3 = usb3;
+		usb3_ep->num = i;
+		usb3_ep->ep.name = usb3_ep->ep_name;
+		usb3_ep->ep.ops = &renesas_usb3_ep_ops;
+		INIT_LIST_HEAD(&usb3_ep->queue);
+		INIT_LIST_HEAD(&usb3_ep->ep.ep_list);
+		if (!i) {
+			/* for control pipe */
+			usb3->gadget.ep0 = &usb3_ep->ep;
+			usb_ep_set_maxpacket_limit(&usb3_ep->ep,
+						USB3_EP0_HSFS_MAX_PACKET_SIZE);
+			usb3_ep->ep.caps.type_control = true;
+			usb3_ep->ep.caps.dir_in = true;
+			usb3_ep->ep.caps.dir_out = true;
+			continue;
+		}
+
+		/* for bulk or interrupt pipe */
+		usb_ep_set_maxpacket_limit(&usb3_ep->ep, ~0);
+		list_add_tail(&usb3_ep->ep.ep_list, &usb3->gadget.ep_list);
+		usb3_ep->ep.caps.type_bulk = true;
+		usb3_ep->ep.caps.type_int = true;
+		if (i & 1)
+			usb3_ep->ep.caps.dir_in = true;
+		else
+			usb3_ep->ep.caps.dir_out = true;
+	}
+
+	return 0;
+}
+
+static void renesas_usb3_init_ram(struct renesas_usb3 *usb3, struct device *dev,
+				  const struct renesas_usb3_priv *priv)
+{
+	struct renesas_usb3_ep *usb3_ep;
+	int i;
+	u32 ramif[2], basead[2];	/* index 0 = for IN pipes */
+	u32 *cur_ramif, *cur_basead;
+	u32 val;
+
+	memset(ramif, 0, sizeof(ramif));
+	memset(basead, 0, sizeof(basead));
+
+	/*
+	 * This driver prepares pipes as the followings:
+	 *  - all pipes = the same size as "ramsize_per_pipe"
+	 * Please refer to the "Method of Specifying RAM Mapping"
+	 */
+	usb3_for_each_ep(usb3_ep, usb3, i) {
+		if (!i)
+			continue;	/* out of scope if ep num = 0 */
+		if (usb3_ep->ep.caps.dir_in) {
+			cur_ramif = &ramif[0];
+			cur_basead = &basead[0];
+		} else {
+			cur_ramif = &ramif[1];
+			cur_basead = &basead[1];
+		}
+
+		if (*cur_basead > priv->ramsize_per_ramif)
+			continue;	/* out of memory for IN or OUT pipe */
+
+		/* calculate rammap_val */
+		val = PN_RAMMAP_RAMIF(*cur_ramif);
+		val |= usb3_calc_ramarea(priv->ramsize_per_pipe);
+		val |= PN_RAMMAP_BASEAD(*cur_basead);
+		usb3_ep->rammap_val = val;
+
+		dev_dbg(dev, "ep%2d: val = %08x, ramif = %d, base = %x\n",
+			i, val, *cur_ramif, *cur_basead);
+
+		/* update current ramif */
+		if (*cur_ramif + 1 == priv->num_ramif) {
+			*cur_ramif = 0;
+			*cur_basead += priv->ramsize_per_pipe;
+		} else {
+			(*cur_ramif)++;
+		}
+	}
+}
+
+static const struct renesas_usb3_priv renesas_usb3_priv_r8a7795 = {
+	.ramsize_per_ramif = SZ_16K,
+	.num_ramif = 2,
+	.ramsize_per_pipe = SZ_4K,
+	.workaround_for_vbus = true,
+};
+
+static const struct of_device_id usb3_of_match[] = {
+	{
+		.compatible = "renesas,r8a7795-usb3-peri",
+		.data = &renesas_usb3_priv_r8a7795,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, usb3_of_match);
+
+static int renesas_usb3_probe(struct platform_device *pdev)
+{
+	struct renesas_usb3 *usb3;
+	struct resource *res;
+	const struct of_device_id *match;
+	int irq, ret;
+	const struct renesas_usb3_priv *priv;
+
+	match = of_match_node(usb3_of_match, pdev->dev.of_node);
+	if (!match)
+		return -ENODEV;
+	priv = match->data;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return -ENODEV;
+
+	usb3 = devm_kzalloc(&pdev->dev, sizeof(*usb3), GFP_KERNEL);
+	if (!usb3)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	usb3->reg = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(usb3->reg))
+		return PTR_ERR(usb3->reg);
+
+	platform_set_drvdata(pdev, usb3);
+	spin_lock_init(&usb3->lock);
+
+	usb3->gadget.ops = &renesas_usb3_gadget_ops;
+	usb3->gadget.name = udc_name;
+	usb3->gadget.max_speed = USB_SPEED_SUPER;
+	INIT_LIST_HEAD(&usb3->gadget.ep_list);
+	ret = renesas_usb3_init_ep(usb3, &pdev->dev, priv);
+	if (ret < 0)
+		return ret;
+	renesas_usb3_init_ram(usb3, &pdev->dev, priv);
+
+	ret = devm_request_irq(&pdev->dev, irq, renesas_usb3_irq, 0,
+			       dev_name(&pdev->dev), usb3);
+	if (ret < 0)
+		return ret;
+
+	/* for ep0 handling */
+	usb3->ep0_req = __renesas_usb3_ep_alloc_request(GFP_KERNEL);
+	if (!usb3->ep0_req)
+		return -ENOMEM;
+
+	ret = usb_add_gadget_udc(&pdev->dev, &usb3->gadget);
+	if (ret < 0)
+		goto err_add_udc;
+
+	usb3->workaround_for_vbus = priv->workaround_for_vbus;
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
+
+	dev_info(&pdev->dev, "probed\n");
+
+	return 0;
+
+err_add_udc:
+	__renesas_usb3_ep_free_request(usb3->ep0_req);
+
+	return ret;
+}
+
+static struct platform_driver renesas_usb3_driver = {
+	.probe		= renesas_usb3_probe,
+	.remove		= renesas_usb3_remove,
+	.driver		= {
+		.name =	(char *)udc_name,
+		.of_match_table = of_match_ptr(usb3_of_match),
+	},
+};
+module_platform_driver(renesas_usb3_driver);
+
+MODULE_DESCRIPTION("Renesas USB3.0 Peripheral driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>");
+MODULE_ALIAS("platform:renesas_usb3");
diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c
index e9def42..82a9e2a 100644
--- a/drivers/usb/gadget/udc/s3c-hsudc.c
+++ b/drivers/usb/gadget/udc/s3c-hsudc.c
@@ -569,7 +569,7 @@
 		hsep = &hsudc->ep[ep_num];
 		switch (le16_to_cpu(ctrl->wValue)) {
 		case USB_ENDPOINT_HALT:
-			if (set || (!set && !hsep->wedge))
+			if (set || !hsep->wedge)
 				s3c_hsudc_set_halt(&hsep->ep, set);
 			return 0;
 		}
diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
index f660afb..fd73a3ea 100644
--- a/drivers/usb/gadget/udc/udc-core.c
+++ b/drivers/usb/gadget/udc/udc-core.c
@@ -51,8 +51,12 @@
 
 static struct class *udc_class;
 static LIST_HEAD(udc_list);
+static LIST_HEAD(gadget_driver_pending_list);
 static DEFINE_MUTEX(udc_lock);
 
+static int udc_bind_to_driver(struct usb_udc *udc,
+		struct usb_gadget_driver *driver);
+
 /* ------------------------------------------------------------------------- */
 
 #ifdef	CONFIG_HAS_DMA
@@ -356,6 +360,7 @@
 		void (*release)(struct device *dev))
 {
 	struct usb_udc		*udc;
+	struct usb_gadget_driver *driver;
 	int			ret = -ENOMEM;
 
 	udc = kzalloc(sizeof(*udc), GFP_KERNEL);
@@ -403,6 +408,18 @@
 	usb_gadget_set_state(gadget, USB_STATE_NOTATTACHED);
 	udc->vbus = true;
 
+	/* pick up one of pending gadget drivers */
+	list_for_each_entry(driver, &gadget_driver_pending_list, pending) {
+		if (!driver->udc_name || strcmp(driver->udc_name,
+						dev_name(&udc->dev)) == 0) {
+			ret = udc_bind_to_driver(udc, driver);
+			if (ret)
+				goto err4;
+			list_del(&driver->pending);
+			break;
+		}
+	}
+
 	mutex_unlock(&udc_lock);
 
 	return 0;
@@ -473,10 +490,14 @@
 
 	mutex_lock(&udc_lock);
 	list_del(&udc->list);
-	mutex_unlock(&udc_lock);
 
-	if (udc->driver)
+	if (udc->driver) {
+		struct usb_gadget_driver *driver = udc->driver;
+
 		usb_gadget_remove_driver(udc);
+		list_add(&driver->pending, &gadget_driver_pending_list);
+	}
+	mutex_unlock(&udc_lock);
 
 	kobject_uevent(&udc->dev.kobj, KOBJ_REMOVE);
 	flush_work(&gadget->work);
@@ -520,50 +541,36 @@
 	return ret;
 }
 
-int usb_udc_attach_driver(const char *name, struct usb_gadget_driver *driver)
-{
-	struct usb_udc *udc = NULL;
-	int ret = -ENODEV;
-
-	mutex_lock(&udc_lock);
-	list_for_each_entry(udc, &udc_list, list) {
-		ret = strcmp(name, dev_name(&udc->dev));
-		if (!ret)
-			break;
-	}
-	if (ret) {
-		ret = -ENODEV;
-		goto out;
-	}
-	if (udc->driver) {
-		ret = -EBUSY;
-		goto out;
-	}
-	ret = udc_bind_to_driver(udc, driver);
-out:
-	mutex_unlock(&udc_lock);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(usb_udc_attach_driver);
-
 int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
 {
 	struct usb_udc		*udc = NULL;
-	int			ret;
+	int			ret = -ENODEV;
 
 	if (!driver || !driver->bind || !driver->setup)
 		return -EINVAL;
 
 	mutex_lock(&udc_lock);
-	list_for_each_entry(udc, &udc_list, list) {
-		/* For now we take the first one */
-		if (!udc->driver)
+	if (driver->udc_name) {
+		list_for_each_entry(udc, &udc_list, list) {
+			ret = strcmp(driver->udc_name, dev_name(&udc->dev));
+			if (!ret)
+				break;
+		}
+		if (!ret && !udc->driver)
 			goto found;
+	} else {
+		list_for_each_entry(udc, &udc_list, list) {
+			/* For now we take the first one */
+			if (!udc->driver)
+				goto found;
+		}
 	}
 
-	pr_debug("couldn't find an available UDC\n");
+	list_add_tail(&driver->pending, &gadget_driver_pending_list);
+	pr_info("udc-core: couldn't find an available UDC - added [%s] to list of pending drivers\n",
+		driver->function);
 	mutex_unlock(&udc_lock);
-	return -ENODEV;
+	return 0;
 found:
 	ret = udc_bind_to_driver(udc, driver);
 	mutex_unlock(&udc_lock);
@@ -589,6 +596,10 @@
 			break;
 		}
 
+	if (ret) {
+		list_del(&driver->pending);
+		ret = 0;
+	}
 	mutex_unlock(&udc_lock);
 	return ret;
 }
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index ee9ff70..c3791a0 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1360,8 +1360,7 @@
 		break;
 	}
 
-	printk(KERN_DEBUG "%s: setup fifo_mode %d\n",
-			musb_driver_name, fifo_mode);
+	pr_debug("%s: setup fifo_mode %d\n", musb_driver_name, fifo_mode);
 
 
 done:
@@ -1390,7 +1389,7 @@
 		musb->nr_endpoints = max(epn, musb->nr_endpoints);
 	}
 
-	printk(KERN_DEBUG "%s: %d/%d max ep, %d/%d memory\n",
+	pr_debug("%s: %d/%d max ep, %d/%d memory\n",
 			musb_driver_name,
 			n + 1, musb->config->num_eps * 2 - 1,
 			offset, (1 << (musb->config->ram_bits + 2)));
@@ -1491,8 +1490,7 @@
 	if (reg & MUSB_CONFIGDATA_SOFTCONE)
 		strcat(aInfo, ", SoftConn");
 
-	printk(KERN_DEBUG "%s: ConfigData=0x%02x (%s)\n",
-			musb_driver_name, reg, aInfo);
+	pr_debug("%s: ConfigData=0x%02x (%s)\n", musb_driver_name, reg, aInfo);
 
 	aDate[0] = 0;
 	if (MUSB_CONTROLLER_MHDRC == musb_type) {
@@ -1502,9 +1500,8 @@
 		musb->is_multipoint = 0;
 		type = "";
 #ifndef	CONFIG_USB_OTG_BLACKLIST_HUB
-		printk(KERN_ERR
-			"%s: kernel must blacklist external hubs\n",
-			musb_driver_name);
+		pr_err("%s: kernel must blacklist external hubs\n",
+		       musb_driver_name);
 #endif
 	}
 
@@ -1513,8 +1510,8 @@
 	snprintf(aRevision, 32, "%d.%d%s", MUSB_HWVERS_MAJOR(musb->hwvers),
 		MUSB_HWVERS_MINOR(musb->hwvers),
 		(musb->hwvers & MUSB_HWVERS_RC) ? "RC" : "");
-	printk(KERN_DEBUG "%s: %sHDRC RTL version %s %s\n",
-			musb_driver_name, type, aRevision, aDate);
+	pr_debug("%s: %sHDRC RTL version %s %s\n",
+		 musb_driver_name, type, aRevision, aDate);
 
 	/* configure ep0 */
 	musb_configure_ep0(musb);
@@ -1705,6 +1702,23 @@
 #define use_dma			0
 #endif
 
+static void (*musb_phy_callback)(enum musb_vbus_id_status status);
+
+/*
+ * musb_mailbox - optional phy notifier function
+ * @status phy state change
+ *
+ * Optionally gets called from the USB PHY. Note that the USB PHY must be
+ * disabled at the point the phy_callback is registered or unregistered.
+ */
+void musb_mailbox(enum musb_vbus_id_status status)
+{
+	if (musb_phy_callback)
+		musb_phy_callback(status);
+
+};
+EXPORT_SYMBOL_GPL(musb_mailbox);
+
 /*-------------------------------------------------------------------------*/
 
 static ssize_t
@@ -2117,8 +2131,15 @@
 		musb->xceiv->io_ops = &musb_ulpi_access;
 	}
 
+	if (musb->ops->phy_callback)
+		musb_phy_callback = musb->ops->phy_callback;
+
 	pm_runtime_get_sync(musb->controller);
 
+	status = usb_phy_init(musb->xceiv);
+	if (status < 0)
+		goto err_usb_phy_init;
+
 	if (use_dma && dev->dma_mask) {
 		musb->dma_controller =
 			musb_dma_controller_create(musb, musb->mregs);
@@ -2239,7 +2260,11 @@
 	cancel_delayed_work_sync(&musb->deassert_reset_work);
 	if (musb->dma_controller)
 		musb_dma_controller_destroy(musb->dma_controller);
+
 fail2_5:
+	usb_phy_shutdown(musb->xceiv);
+
+err_usb_phy_init:
 	pm_runtime_put_sync(musb->controller);
 
 fail2:
@@ -2295,10 +2320,13 @@
 	 */
 	musb_exit_debugfs(musb);
 	musb_shutdown(pdev);
+	musb_phy_callback = NULL;
 
 	if (musb->dma_controller)
 		musb_dma_controller_destroy(musb->dma_controller);
 
+	usb_phy_shutdown(musb->xceiv);
+
 	cancel_work_sync(&musb->irq_work);
 	cancel_delayed_work_sync(&musb->finish_resume_work);
 	cancel_delayed_work_sync(&musb->deassert_reset_work);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 2337d7a..fd215fb 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -168,6 +168,7 @@
  * @adjust_channel_params: pre check for standard dma channel_program func
  * @pre_root_reset_end: called before the root usb port reset flag gets cleared
  * @post_root_reset_end: called after the root usb port reset flag gets cleared
+ * @phy_callback: optional callback function for the phy to call
  */
 struct musb_platform_ops {
 
@@ -214,6 +215,7 @@
 				dma_addr_t *dma_addr, u32 *len);
 	void	(*pre_root_reset_end)(struct musb *musb);
 	void	(*post_root_reset_end)(struct musb *musb);
+	void	(*phy_callback)(enum musb_vbus_id_status status);
 };
 
 /*
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 67ad630..87bd578 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -353,9 +353,8 @@
 					 *	1	>0	Yes(FS bulk)
 					 */
 					if (!musb_ep->hb_mult ||
-						(musb_ep->hb_mult &&
-						 can_bulk_split(musb,
-						    musb_ep->type)))
+					    can_bulk_split(musb,
+							   musb_ep->type))
 						csr |= MUSB_TXCSR_AUTOSET;
 				}
 				csr &= ~MUSB_TXCSR_P_UNDERRUN;
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 1bd9232..c84e0322 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -36,7 +36,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/err.h>
 #include <linux/delay.h>
-#include <linux/usb/musb-omap.h>
+#include <linux/usb/musb.h>
 #include <linux/phy/omap_control_phy.h>
 #include <linux/of_platform.h>
 
@@ -46,7 +46,7 @@
 struct omap2430_glue {
 	struct device		*dev;
 	struct platform_device	*musb;
-	enum omap_musb_vbus_id_status status;
+	enum musb_vbus_id_status status;
 	struct work_struct	omap_musb_mailbox_work;
 	struct device		*control_otghs;
 };
@@ -234,7 +234,7 @@
 	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
 }
 
-void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
+static void omap2430_musb_mailbox(enum musb_vbus_id_status status)
 {
 	struct omap2430_glue	*glue = _glue;
 
@@ -251,7 +251,6 @@
 
 	schedule_work(&glue->omap_musb_mailbox_work);
 }
-EXPORT_SYMBOL_GPL(omap_musb_mailbox);
 
 static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 {
@@ -262,7 +261,7 @@
 	struct usb_otg *otg = musb->xceiv->otg;
 
 	switch (glue->status) {
-	case OMAP_MUSB_ID_GROUND:
+	case MUSB_ID_GROUND:
 		dev_dbg(dev, "ID GND\n");
 
 		otg->default_a = true;
@@ -276,7 +275,7 @@
 		}
 		break;
 
-	case OMAP_MUSB_VBUS_VALID:
+	case MUSB_VBUS_VALID:
 		dev_dbg(dev, "VBUS Connect\n");
 
 		otg->default_a = false;
@@ -287,8 +286,8 @@
 		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
 		break;
 
-	case OMAP_MUSB_ID_FLOAT:
-	case OMAP_MUSB_VBUS_OFF:
+	case MUSB_ID_FLOAT:
+	case MUSB_VBUS_OFF:
 		dev_dbg(dev, "VBUS Disconnect\n");
 
 		musb->xceiv->last_event = USB_EVENT_NONE;
@@ -430,7 +429,7 @@
 
 	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
 
-	if (glue->status != OMAP_MUSB_UNKNOWN)
+	if (glue->status != MUSB_UNKNOWN)
 		omap_musb_set_mailbox(glue);
 
 	phy_init(musb->phy);
@@ -455,7 +454,7 @@
 
 	switch (glue->status) {
 
-	case OMAP_MUSB_ID_GROUND:
+	case MUSB_ID_GROUND:
 		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_HOST);
 		if (data->interface_type != MUSB_INTERFACE_UTMI)
 			break;
@@ -474,7 +473,7 @@
 		}
 		break;
 
-	case OMAP_MUSB_VBUS_VALID:
+	case MUSB_VBUS_VALID:
 		omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE);
 		break;
 
@@ -488,7 +487,7 @@
 	struct device *dev = musb->controller;
 	struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
 
-	if (glue->status != OMAP_MUSB_UNKNOWN)
+	if (glue->status != MUSB_UNKNOWN)
 		omap_control_usb_set_mode(glue->control_otghs,
 			USB_MODE_DISCONNECT);
 }
@@ -520,6 +519,8 @@
 
 	.enable		= omap2430_musb_enable,
 	.disable	= omap2430_musb_disable,
+
+	.phy_callback	= omap2430_musb_mailbox,
 };
 
 static u64 omap2430_dmamask = DMA_BIT_MASK(32);
@@ -551,7 +552,7 @@
 
 	glue->dev			= &pdev->dev;
 	glue->musb			= musb;
-	glue->status			= OMAP_MUSB_UNKNOWN;
+	glue->status			= MUSB_UNKNOWN;
 	glue->control_otghs = ERR_PTR(-ENODEV);
 
 	if (np) {
@@ -663,8 +664,11 @@
 {
 	struct omap2430_glue		*glue = platform_get_drvdata(pdev);
 
+	pm_runtime_get_sync(glue->dev);
 	cancel_work_sync(&glue->omap_musb_mailbox_work);
 	platform_device_unregister(glue->musb);
+	pm_runtime_put_sync(glue->dev);
+	pm_runtime_disable(glue->dev);
 
 	return 0;
 }
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 22e8ecb..c690474 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -66,6 +66,7 @@
 	select USB_PHY
 	select AM335X_CONTROL_USB
 	select NOP_USB_XCEIV
+	select USB_COMMON
 	help
 	  This driver provides PHY support for that phy which part for the
 	  AM335x SoC.
@@ -186,19 +187,6 @@
 
 	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
 
-config USB_RCAR_PHY
-	tristate "Renesas R-Car USB PHY support"
-	depends on USB || USB_GADGET
-	depends on ARCH_R8A7778 || ARCH_R8A7779 || COMPILE_TEST
-	select USB_PHY
-	help
-	  Say Y here to add support for the Renesas R-Car USB common PHY driver.
-	  This chip is typically used as USB PHY for USB host, gadget.
-	  This driver supports R8A7778 and R8A7779.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called phy-rcar-usb.
-
 config USB_ULPI
 	bool "Generic ULPI Transceiver Driver"
 	depends on ARM || ARM64
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 19c0dcc..b433e5d 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -23,7 +23,6 @@
 obj-$(CONFIG_USB_QCOM_8X16_PHY)	+= phy-qcom-8x16-usb.o
 obj-$(CONFIG_USB_MV_OTG)		+= phy-mv-usb.o
 obj-$(CONFIG_USB_MXS_PHY)		+= phy-mxs-usb.o
-obj-$(CONFIG_USB_RCAR_PHY)		+= phy-rcar-usb.o
 obj-$(CONFIG_USB_ULPI)			+= phy-ulpi.o
 obj-$(CONFIG_USB_ULPI_VIEWPORT)		+= phy-ulpi-viewport.o
 obj-$(CONFIG_KEYSTONE_USB_PHY)		+= phy-keystone.o
diff --git a/drivers/usb/phy/phy-am335x-control.c b/drivers/usb/phy/phy-am335x-control.c
index 7b3035f..42a1afe 100644
--- a/drivers/usb/phy/phy-am335x-control.c
+++ b/drivers/usb/phy/phy-am335x-control.c
@@ -4,7 +4,8 @@
 #include <linux/of.h>
 #include <linux/io.h>
 #include <linux/delay.h>
-#include "am35x-phy-control.h"
+#include <linux/usb/otg.h>
+#include "phy-am335x-control.h"
 
 struct am335x_control_usb {
 	struct device *dev;
@@ -58,7 +59,8 @@
 	spin_unlock(&usb_ctrl->lock);
 }
 
-static void am335x_phy_power(struct phy_control *phy_ctrl, u32 id, bool on)
+static void am335x_phy_power(struct phy_control *phy_ctrl, u32 id,
+				enum usb_dr_mode dr_mode, bool on)
 {
 	struct am335x_control_usb *usb_ctrl;
 	u32 val;
@@ -80,8 +82,14 @@
 
 	val = readl(usb_ctrl->phy_reg + reg);
 	if (on) {
-		val &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN);
-		val |= USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN;
+		if (dr_mode == USB_DR_MODE_HOST) {
+			val &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN |
+					USBPHY_OTGVDET_EN);
+			val |= USBPHY_OTGSESSEND_EN;
+		} else {
+			val &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN);
+			val |= USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN;
+		}
 	} else {
 		val |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN;
 	}
diff --git a/drivers/usb/phy/am35x-phy-control.h b/drivers/usb/phy/phy-am335x-control.h
similarity index 68%
rename from drivers/usb/phy/am35x-phy-control.h
rename to drivers/usb/phy/phy-am335x-control.h
index b96594d..e86b316 100644
--- a/drivers/usb/phy/am35x-phy-control.h
+++ b/drivers/usb/phy/phy-am335x-control.h
@@ -2,13 +2,15 @@
 #define _AM335x_PHY_CONTROL_H_
 
 struct phy_control {
-	void (*phy_power)(struct phy_control *phy_ctrl, u32 id, bool on);
+	void (*phy_power)(struct phy_control *phy_ctrl, u32 id,
+			enum usb_dr_mode dr_mode, bool on);
 	void (*phy_wkup)(struct phy_control *phy_ctrl, u32 id, bool on);
 };
 
-static inline void phy_ctrl_power(struct phy_control *phy_ctrl, u32 id, bool on)
+static inline void phy_ctrl_power(struct phy_control *phy_ctrl, u32 id,
+				enum usb_dr_mode dr_mode, bool on)
 {
-	phy_ctrl->phy_power(phy_ctrl, id, on);
+	phy_ctrl->phy_power(phy_ctrl, id, dr_mode, on);
 }
 
 static inline void phy_ctrl_wkup(struct phy_control *phy_ctrl, u32 id, bool on)
diff --git a/drivers/usb/phy/phy-am335x.c b/drivers/usb/phy/phy-am335x.c
index 90b67a4..39b424f 100644
--- a/drivers/usb/phy/phy-am335x.c
+++ b/drivers/usb/phy/phy-am335x.c
@@ -8,21 +8,23 @@
 #include <linux/regulator/consumer.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/usb/of.h>
 
-#include "am35x-phy-control.h"
+#include "phy-am335x-control.h"
 #include "phy-generic.h"
 
 struct am335x_phy {
 	struct usb_phy_generic usb_phy_gen;
 	struct phy_control *phy_ctrl;
 	int id;
+	enum usb_dr_mode dr_mode;
 };
 
 static int am335x_init(struct usb_phy *phy)
 {
 	struct am335x_phy *am_phy = dev_get_drvdata(phy->dev);
 
-	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, true);
+	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, true);
 	return 0;
 }
 
@@ -30,7 +32,7 @@
 {
 	struct am335x_phy *am_phy = dev_get_drvdata(phy->dev);
 
-	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, false);
+	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, false);
 }
 
 static int am335x_phy_probe(struct platform_device *pdev)
@@ -46,12 +48,15 @@
 	am_phy->phy_ctrl = am335x_get_phy_control(dev);
 	if (!am_phy->phy_ctrl)
 		return -EPROBE_DEFER;
+
 	am_phy->id = of_alias_get_id(pdev->dev.of_node, "phy");
 	if (am_phy->id < 0) {
 		dev_err(&pdev->dev, "Missing PHY id: %d\n", am_phy->id);
 		return am_phy->id;
 	}
 
+	am_phy->dr_mode = of_usb_get_dr_mode_by_phy(pdev->dev.of_node);
+
 	ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen, NULL);
 	if (ret)
 		return ret;
@@ -75,7 +80,7 @@
 	 */
 
 	device_set_wakeup_enable(dev, false);
-	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, false);
+	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, false);
 
 	return 0;
 }
@@ -105,7 +110,7 @@
 	if (device_may_wakeup(dev))
 		phy_ctrl_wkup(am_phy->phy_ctrl, am_phy->id, true);
 
-	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, false);
+	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, false);
 
 	return 0;
 }
@@ -115,7 +120,7 @@
 	struct platform_device	*pdev = to_platform_device(dev);
 	struct am335x_phy	*am_phy = platform_get_drvdata(pdev);
 
-	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, true);
+	phy_ctrl_power(am_phy->phy_ctrl, am_phy->id, am_phy->dr_mode, true);
 
 	if (device_may_wakeup(dev))
 		phy_ctrl_wkup(am_phy->phy_ctrl, am_phy->id, false);
diff --git a/drivers/usb/phy/phy-rcar-usb.c b/drivers/usb/phy/phy-rcar-usb.c
deleted file mode 100644
index 1e09b83..0000000
--- a/drivers/usb/phy/phy-rcar-usb.c
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * Renesas R-Car USB phy driver
- *
- * Copyright (C) 2012-2013 Renesas Solutions Corp.
- * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- * Copyright (C) 2013 Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/usb/otg.h>
-#include <linux/platform_device.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <linux/platform_data/usb-rcar-phy.h>
-
-/* REGS block */
-#define USBPCTRL0	0x00
-#define USBPCTRL1	0x04
-#define USBST		0x08
-#define USBEH0		0x0C
-#define USBOH0		0x1C
-#define USBCTL0		0x58
-
-/* High-speed signal quality characteristic control registers (R8A7778 only) */
-#define HSQCTL1		0x24
-#define HSQCTL2		0x28
-
-/* USBPCTRL0 */
-#define OVC2		(1 << 10) /* (R8A7779 only)			*/
-				/* Switches the OVC input pin for port 2: */
-				/* 1: USB_OVC2, 0: OVC2			*/
-#define OVC1_VBUS1	(1 << 9) /* Switches the OVC input pin for port 1: */
-				/* 1: USB_OVC1, 0: OVC1/VBUS1		*/
-				/* Function mode: set to 0		*/
-#define OVC0		(1 << 8) /* Switches the OVC input pin for port 0: */
-				/* 1: USB_OVC0 pin, 0: OVC0		*/
-#define OVC2_ACT 	(1 << 6) /* (R8A7779 only)			*/
-				/* Host mode: OVC2 polarity:		*/
-				/* 1: active-high, 0: active-low	*/
-#define PENC		(1 << 4) /* Function mode: output level of PENC1 pin: */
-				/* 1: high, 0: low			*/
-#define OVC0_ACT 	(1 << 3) /* Host mode: OVC0 polarity:		*/
-				/* 1: active-high, 0: active-low	*/
-#define OVC1_ACT	(1 << 1) /* Host mode: OVC1 polarity:		*/
-				/* 1: active-high, 0: active-low	*/
-				/* Function mode: be sure to set to 1	*/
-#define PORT1		(1 << 0) /* Selects port 1 mode:		*/
-				/* 1: function, 0: host			*/
-/* USBPCTRL1 */
-#define PHY_RST		(1 << 2)
-#define PLL_ENB		(1 << 1)
-#define PHY_ENB		(1 << 0)
-
-/* USBST */
-#define ST_ACT		(1 << 31)
-#define ST_PLL		(1 << 30)
-
-struct rcar_usb_phy_priv {
-	struct usb_phy phy;
-	spinlock_t lock;
-
-	void __iomem *reg0;
-	void __iomem *reg1;
-	int counter;
-};
-
-#define usb_phy_to_priv(p) container_of(p, struct rcar_usb_phy_priv, phy)
-
-
-/*
- * USB initial/install operation.
- *
- * This function setup USB phy.
- * The used value and setting order came from
- * [USB :: Initial setting] on datasheet.
- */
-static int rcar_usb_phy_init(struct usb_phy *phy)
-{
-	struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy);
-	struct device *dev = phy->dev;
-	struct rcar_phy_platform_data *pdata = dev_get_platdata(dev);
-	void __iomem *reg0 = priv->reg0;
-	void __iomem *reg1 = priv->reg1;
-	static const u8 ovcn_act[] = { OVC0_ACT, OVC1_ACT, OVC2_ACT };
-	int i;
-	u32 val;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-	if (priv->counter++ == 0) {
-
-		/*
-		 * USB phy start-up
-		 */
-
-		/* (1) USB-PHY standby release */
-		iowrite32(PHY_ENB, (reg0 + USBPCTRL1));
-
-		/* (2) start USB-PHY internal PLL */
-		iowrite32(PHY_ENB | PLL_ENB, (reg0 + USBPCTRL1));
-
-		/* (3) set USB-PHY in accord with the conditions of usage */
-		if (reg1) {
-			u32 hsqctl1 = pdata->ferrite_bead ? 0x41 : 0;
-			u32 hsqctl2 = pdata->ferrite_bead ? 0x0d : 7;
-
-			iowrite32(hsqctl1, reg1 + HSQCTL1);
-			iowrite32(hsqctl2, reg1 + HSQCTL2);
-		}
-
-		/* (4) USB module status check */
-		for (i = 0; i < 1024; i++) {
-			udelay(10);
-			val = ioread32(reg0 + USBST);
-			if (val == (ST_ACT | ST_PLL))
-				break;
-		}
-
-		if (val != (ST_ACT | ST_PLL)) {
-			dev_err(dev, "USB phy not ready\n");
-			goto phy_init_end;
-		}
-
-		/* (5) USB-PHY reset clear */
-		iowrite32(PHY_ENB | PLL_ENB | PHY_RST, (reg0 + USBPCTRL1));
-
-		/* Board specific port settings */
-		val = 0;
-		if (pdata->port1_func)
-			val |= PORT1;
-		if (pdata->penc1)
-			val |= PENC;
-		for (i = 0; i < 3; i++) {
-			/* OVCn bits follow each other in the right order */
-			if (pdata->ovc_pin[i].select_3_3v)
-				val |= OVC0 << i;
-			/* OVCn_ACT bits are spaced by irregular intervals */
-			if (pdata->ovc_pin[i].active_high)
-				val |= ovcn_act[i];
-		}
-		iowrite32(val, (reg0 + USBPCTRL0));
-
-		/*
-		 * Bus alignment settings
-		 */
-
-		/* (1) EHCI bus alignment (little endian) */
-		iowrite32(0x00000000, (reg0 + USBEH0));
-
-		/* (1) OHCI bus alignment (little endian) */
-		iowrite32(0x00000000, (reg0 + USBOH0));
-	}
-
-phy_init_end:
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	return 0;
-}
-
-static void rcar_usb_phy_shutdown(struct usb_phy *phy)
-{
-	struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy);
-	void __iomem *reg0 = priv->reg0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	if (priv->counter-- == 1)	/* last user */
-		iowrite32(0x00000000, (reg0 + USBPCTRL1));
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-static int rcar_usb_phy_probe(struct platform_device *pdev)
-{
-	struct rcar_usb_phy_priv *priv;
-	struct resource *res0, *res1;
-	struct device *dev = &pdev->dev;
-	void __iomem *reg0, *reg1 = NULL;
-	int ret;
-
-	if (!dev_get_platdata(&pdev->dev)) {
-		dev_err(dev, "No platform data\n");
-		return -EINVAL;
-	}
-
-	res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	reg0 = devm_ioremap_resource(dev, res0);
-	if (IS_ERR(reg0))
-		return PTR_ERR(reg0);
-
-	res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	reg1 = devm_ioremap_resource(dev, res1);
-	if (IS_ERR(reg1))
-		return PTR_ERR(reg1);
-
-	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
-	priv->reg0		= reg0;
-	priv->reg1		= reg1;
-	priv->counter		= 0;
-	priv->phy.dev		= dev;
-	priv->phy.label		= dev_name(dev);
-	priv->phy.init		= rcar_usb_phy_init;
-	priv->phy.shutdown	= rcar_usb_phy_shutdown;
-	spin_lock_init(&priv->lock);
-
-	ret = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2);
-	if (ret < 0) {
-		dev_err(dev, "usb phy addition error\n");
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, priv);
-
-	return ret;
-}
-
-static int rcar_usb_phy_remove(struct platform_device *pdev)
-{
-	struct rcar_usb_phy_priv *priv = platform_get_drvdata(pdev);
-
-	usb_remove_phy(&priv->phy);
-
-	return 0;
-}
-
-static struct platform_driver rcar_usb_phy_driver = {
-	.driver		= {
-		.name	= "rcar_usb_phy",
-	},
-	.probe		= rcar_usb_phy_probe,
-	.remove		= rcar_usb_phy_remove,
-};
-
-module_platform_driver(rcar_usb_phy_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("Renesas R-Car USB phy");
-MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");
diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c
index 1274185..014dbbd7 100644
--- a/drivers/usb/phy/phy-twl6030-usb.c
+++ b/drivers/usb/phy/phy-twl6030-usb.c
@@ -25,7 +25,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/usb/musb-omap.h>
+#include <linux/usb/musb.h>
 #include <linux/usb/phy_companion.h>
 #include <linux/phy/omap_usb.h>
 #include <linux/i2c/twl.h>
@@ -102,7 +102,7 @@
 
 	int			irq1;
 	int			irq2;
-	enum omap_musb_vbus_id_status linkstat;
+	enum musb_vbus_id_status linkstat;
 	u8			asleep;
 	bool			vbus_enable;
 	const char		*regulator;
@@ -189,13 +189,13 @@
 	spin_lock_irqsave(&twl->lock, flags);
 
 	switch (twl->linkstat) {
-	case OMAP_MUSB_VBUS_VALID:
+	case MUSB_VBUS_VALID:
 	       ret = snprintf(buf, PAGE_SIZE, "vbus\n");
 	       break;
-	case OMAP_MUSB_ID_GROUND:
+	case MUSB_ID_GROUND:
 	       ret = snprintf(buf, PAGE_SIZE, "id\n");
 	       break;
-	case OMAP_MUSB_VBUS_OFF:
+	case MUSB_VBUS_OFF:
 	       ret = snprintf(buf, PAGE_SIZE, "none\n");
 	       break;
 	default:
@@ -210,7 +210,7 @@
 static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
 {
 	struct twl6030_usb *twl = _twl;
-	enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN;
+	enum musb_vbus_id_status status = MUSB_UNKNOWN;
 	u8 vbus_state, hw_state;
 	int ret;
 
@@ -225,14 +225,14 @@
 				dev_err(twl->dev, "Failed to enable usb3v3\n");
 
 			twl->asleep = 1;
-			status = OMAP_MUSB_VBUS_VALID;
+			status = MUSB_VBUS_VALID;
 			twl->linkstat = status;
-			omap_musb_mailbox(status);
+			musb_mailbox(status);
 		} else {
-			if (twl->linkstat != OMAP_MUSB_UNKNOWN) {
-				status = OMAP_MUSB_VBUS_OFF;
+			if (twl->linkstat != MUSB_UNKNOWN) {
+				status = MUSB_VBUS_OFF;
 				twl->linkstat = status;
-				omap_musb_mailbox(status);
+				musb_mailbox(status);
 				if (twl->asleep) {
 					regulator_disable(twl->usb3v3);
 					twl->asleep = 0;
@@ -248,7 +248,7 @@
 static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
 {
 	struct twl6030_usb *twl = _twl;
-	enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN;
+	enum musb_vbus_id_status status = MUSB_UNKNOWN;
 	u8 hw_state;
 	int ret;
 
@@ -262,9 +262,9 @@
 		twl->asleep = 1;
 		twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR);
 		twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET);
-		status = OMAP_MUSB_ID_GROUND;
+		status = MUSB_ID_GROUND;
 		twl->linkstat = status;
-		omap_musb_mailbox(status);
+		musb_mailbox(status);
 	} else  {
 		twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR);
 		twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET);
@@ -334,7 +334,7 @@
 	twl->dev		= &pdev->dev;
 	twl->irq1		= platform_get_irq(pdev, 0);
 	twl->irq2		= platform_get_irq(pdev, 1);
-	twl->linkstat		= OMAP_MUSB_UNKNOWN;
+	twl->linkstat		= MUSB_UNKNOWN;
 
 	twl->comparator.set_vbus	= twl6030_set_vbus;
 	twl->comparator.start_srp	= twl6030_start_srp;
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
index d82fa36..5af9ca5 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -302,37 +302,37 @@
  */
 
 /* commonly used on old SH-Mobile SoCs */
-static u32 usbhsc_default_pipe_type[] = {
-		USB_ENDPOINT_XFER_CONTROL,
-		USB_ENDPOINT_XFER_ISOC,
-		USB_ENDPOINT_XFER_ISOC,
-		USB_ENDPOINT_XFER_BULK,
-		USB_ENDPOINT_XFER_BULK,
-		USB_ENDPOINT_XFER_BULK,
-		USB_ENDPOINT_XFER_INT,
-		USB_ENDPOINT_XFER_INT,
-		USB_ENDPOINT_XFER_INT,
-		USB_ENDPOINT_XFER_INT,
+static struct renesas_usbhs_driver_pipe_config usbhsc_default_pipe[] = {
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_CONTROL, 64, 0x00, false),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x08, false),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x18, false),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x28, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x38, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x48, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x04, false),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x05, false),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x06, false),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x07, false),
 };
 
 /* commonly used on newer SH-Mobile and R-Car SoCs */
-static u32 usbhsc_new_pipe_type[] = {
-		USB_ENDPOINT_XFER_CONTROL,
-		USB_ENDPOINT_XFER_ISOC,
-		USB_ENDPOINT_XFER_ISOC,
-		USB_ENDPOINT_XFER_BULK,
-		USB_ENDPOINT_XFER_BULK,
-		USB_ENDPOINT_XFER_BULK,
-		USB_ENDPOINT_XFER_INT,
-		USB_ENDPOINT_XFER_INT,
-		USB_ENDPOINT_XFER_INT,
-		USB_ENDPOINT_XFER_BULK,
-		USB_ENDPOINT_XFER_BULK,
-		USB_ENDPOINT_XFER_BULK,
-		USB_ENDPOINT_XFER_BULK,
-		USB_ENDPOINT_XFER_BULK,
-		USB_ENDPOINT_XFER_BULK,
-		USB_ENDPOINT_XFER_BULK,
+static struct renesas_usbhs_driver_pipe_config usbhsc_new_pipe[] = {
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_CONTROL, 64, 0x00, false),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x08, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x28, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x48, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x58, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x68, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x04, false),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x05, false),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x06, false),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x78, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x88, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x98, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xa8, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xb8, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xc8, true),
+	RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xd8, true),
 };
 
 /*
@@ -481,6 +481,15 @@
 		.compatible = "renesas,usbhs-r8a7795",
 		.data = (void *)USBHS_TYPE_RCAR_GEN2,
 	},
+	{
+		.compatible = "renesas,rcar-gen2-usbhs",
+		.data = (void *)USBHS_TYPE_RCAR_GEN2,
+	},
+	{
+		/* Gen3 is compatible with Gen2 */
+		.compatible = "renesas,rcar-gen3-usbhs",
+		.data = (void *)USBHS_TYPE_RCAR_GEN2,
+	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, usbhs_of_match);
@@ -564,10 +573,9 @@
 	switch (priv->dparam.type) {
 	case USBHS_TYPE_RCAR_GEN2:
 		priv->pfunc = usbhs_rcar2_ops;
-		if (!priv->dparam.pipe_type) {
-			priv->dparam.pipe_type = usbhsc_new_pipe_type;
-			priv->dparam.pipe_size =
-				ARRAY_SIZE(usbhsc_new_pipe_type);
+		if (!priv->dparam.pipe_configs) {
+			priv->dparam.pipe_configs = usbhsc_new_pipe;
+			priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_new_pipe);
 		}
 		break;
 	default:
@@ -586,9 +594,9 @@
 	dfunc->notify_hotplug	= usbhsc_drvcllbck_notify_hotplug;
 
 	/* set default param if platform doesn't have */
-	if (!priv->dparam.pipe_type) {
-		priv->dparam.pipe_type = usbhsc_default_pipe_type;
-		priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_default_pipe_type);
+	if (!priv->dparam.pipe_configs) {
+		priv->dparam.pipe_configs = usbhsc_default_pipe;
+		priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_default_pipe);
 	}
 	if (!priv->dparam.pio_dma_border)
 		priv->dparam.pio_dma_border = 64; /* 64byte */
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 8f7a78e..657f9672c 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -1042,6 +1042,8 @@
 	struct usbhsg_gpriv *gpriv;
 	struct usbhsg_uep *uep;
 	struct device *dev = usbhs_priv_to_dev(priv);
+	struct renesas_usbhs_driver_pipe_config *pipe_configs =
+					usbhs_get_dparam(priv, pipe_configs);
 	int pipe_size = usbhs_get_dparam(priv, pipe_size);
 	int i;
 	int ret;
@@ -1111,13 +1113,16 @@
 			gpriv->gadget.ep0 = &uep->ep;
 			usb_ep_set_maxpacket_limit(&uep->ep, 64);
 			uep->ep.caps.type_control = true;
-		}
-		/* init normal pipe */
-		else {
-			usb_ep_set_maxpacket_limit(&uep->ep, 512);
-			uep->ep.caps.type_iso = true;
-			uep->ep.caps.type_bulk = true;
-			uep->ep.caps.type_int = true;
+		} else {
+			/* init normal pipe */
+			if (pipe_configs[i].type == USB_ENDPOINT_XFER_ISOC)
+				uep->ep.caps.type_iso = true;
+			if (pipe_configs[i].type == USB_ENDPOINT_XFER_BULK)
+				uep->ep.caps.type_bulk = true;
+			if (pipe_configs[i].type == USB_ENDPOINT_XFER_INT)
+				uep->ep.caps.type_int = true;
+			usb_ep_set_maxpacket_limit(&uep->ep,
+						   pipe_configs[i].bufsize);
 			list_add_tail(&uep->ep.ep_list, &gpriv->gadget.ep_list);
 		}
 		uep->ep.caps.dir_in = true;
diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c
index bd05035..1a8e4c4 100644
--- a/drivers/usb/renesas_usbhs/mod_host.c
+++ b/drivers/usb/renesas_usbhs/mod_host.c
@@ -1414,7 +1414,8 @@
 {
 	struct usbhsh_hpriv *hpriv = usbhsh_priv_to_hpriv(priv);
 	struct usbhs_pipe *pipe;
-	u32 *pipe_type = usbhs_get_dparam(priv, pipe_type);
+	struct renesas_usbhs_driver_pipe_config *pipe_configs =
+					usbhs_get_dparam(priv, pipe_configs);
 	int pipe_size = usbhs_get_dparam(priv, pipe_size);
 	int old_type, dir_in, i;
 
@@ -1442,15 +1443,15 @@
 		 * USB_ENDPOINT_XFER_BULK -> dir in
 		 * ...
 		 */
-		dir_in = (pipe_type[i] == old_type);
-		old_type = pipe_type[i];
+		dir_in = (pipe_configs[i].type == old_type);
+		old_type = pipe_configs[i].type;
 
-		if (USB_ENDPOINT_XFER_CONTROL == pipe_type[i]) {
+		if (USB_ENDPOINT_XFER_CONTROL == pipe_configs[i].type) {
 			pipe = usbhs_dcp_malloc(priv);
 			usbhsh_hpriv_to_dcp(hpriv) = pipe;
 		} else {
 			pipe = usbhs_pipe_malloc(priv,
-						 pipe_type[i],
+						 pipe_configs[i].type,
 						 dir_in);
 		}
 
diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c
index 4f9c335..0e95d29 100644
--- a/drivers/usb/renesas_usbhs/pipe.c
+++ b/drivers/usb/renesas_usbhs/pipe.c
@@ -44,6 +44,15 @@
 	return usbhsp_pipe_name[usbhs_pipe_type(pipe)];
 }
 
+static struct renesas_usbhs_driver_pipe_config
+*usbhsp_get_pipe_config(struct usbhs_priv *priv, int pipe_num)
+{
+	struct renesas_usbhs_driver_pipe_config *pipe_configs =
+					usbhs_get_dparam(priv, pipe_configs);
+
+	return &pipe_configs[pipe_num];
+}
+
 /*
  *		DCPCTR/PIPEnCTR functions
  */
@@ -384,18 +393,6 @@
 /*
  *		pipe setup
  */
-static int usbhsp_possible_double_buffer(struct usbhs_pipe *pipe)
-{
-	/*
-	 * only ISO / BULK pipe can use double buffer
-	 */
-	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK) ||
-	    usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC))
-		return 1;
-
-	return 0;
-}
-
 static u16 usbhsp_setup_pipecfg(struct usbhs_pipe *pipe,
 				int is_host,
 				int dir_in)
@@ -412,7 +409,6 @@
 		[USB_ENDPOINT_XFER_INT]  = TYPE_INT,
 		[USB_ENDPOINT_XFER_ISOC] = TYPE_ISO,
 	};
-	int is_double = usbhsp_possible_double_buffer(pipe);
 
 	if (usbhs_pipe_is_dcp(pipe))
 		return -EINVAL;
@@ -434,10 +430,7 @@
 	    usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
 		bfre = 0; /* FIXME */
 
-	/* DBLB */
-	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC) ||
-	    usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
-		dblb = (is_double) ? DBLB : 0;
+	/* DBLB: see usbhs_pipe_config_update() */
 
 	/* CNTMD */
 	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK))
@@ -473,13 +466,13 @@
 static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe)
 {
 	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
-	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
 	struct device *dev = usbhs_priv_to_dev(priv);
 	int pipe_num = usbhs_pipe_number(pipe);
-	int is_double = usbhsp_possible_double_buffer(pipe);
 	u16 buff_size;
 	u16 bufnmb;
 	u16 bufnmb_cnt;
+	struct renesas_usbhs_driver_pipe_config *pipe_config =
+					usbhsp_get_pipe_config(priv, pipe_num);
 
 	/*
 	 * PIPEBUF
@@ -489,56 +482,13 @@
 	 *  - "Features"  - "Pipe configuration"
 	 *  - "Operation" - "FIFO Buffer Memory"
 	 *  - "Operation" - "Pipe Control"
-	 *
-	 * ex) if pipe6 - pipe9 are USB_ENDPOINT_XFER_INT (SH7724)
-	 *
-	 * BUFNMB:	PIPE
-	 * 0:		pipe0 (DCP 256byte)
-	 * 1:		-
-	 * 2:		-
-	 * 3:		-
-	 * 4:		pipe6 (INT 64byte)
-	 * 5:		pipe7 (INT 64byte)
-	 * 6:		pipe8 (INT 64byte)
-	 * 7:		pipe9 (INT 64byte)
-	 * 8 - xx:	free (for BULK, ISOC)
 	 */
-
-	/*
-	 * FIXME
-	 *
-	 * it doesn't have good buffer allocator
-	 *
-	 * DCP : 256 byte
-	 * BULK: 512 byte
-	 * INT :  64 byte
-	 * ISOC: 512 byte
-	 */
-	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_CONTROL))
-		buff_size = 256;
-	else if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_INT))
-		buff_size = 64;
-	else
-		buff_size = 512;
+	buff_size = pipe_config->bufsize;
+	bufnmb = pipe_config->bufnum;
 
 	/* change buff_size to register value */
 	bufnmb_cnt = (buff_size / 64) - 1;
 
-	/* BUFNMB has been reserved for INT pipe
-	 * see above */
-	if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_INT)) {
-		bufnmb = pipe_num - 2;
-	} else {
-		bufnmb = info->bufnmb_last;
-		info->bufnmb_last += bufnmb_cnt + 1;
-
-		/*
-		 * double buffer
-		 */
-		if (is_double)
-			info->bufnmb_last += bufnmb_cnt + 1;
-	}
-
 	dev_dbg(dev, "pipe : %d : buff_size 0x%x: bufnmb 0x%x\n",
 		pipe_num, buff_size, bufnmb);
 
@@ -549,8 +499,13 @@
 void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel,
 			      u16 epnum, u16 maxp)
 {
+	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+	int pipe_num = usbhs_pipe_number(pipe);
+	struct renesas_usbhs_driver_pipe_config *pipe_config =
+					usbhsp_get_pipe_config(priv, pipe_num);
+	u16 dblb = pipe_config->double_buf ? DBLB : 0;
+
 	if (devsel > 0xA) {
-		struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
 		struct device *dev = usbhs_priv_to_dev(priv);
 
 		dev_err(dev, "devsel error %d\n", devsel);
@@ -568,7 +523,7 @@
 			     maxp);
 
 	if (!usbhs_pipe_is_dcp(pipe))
-		usbhsp_pipe_cfg_set(pipe,  0x000F, epnum);
+		usbhsp_pipe_cfg_set(pipe,  0x000F | DBLB, epnum | dblb);
 }
 
 /*
@@ -708,23 +663,7 @@
 	struct usbhs_pipe *pipe;
 	int i;
 
-	/*
-	 * FIXME
-	 *
-	 * driver needs good allocator.
-	 *
-	 * find first free buffer area (BULK, ISOC)
-	 * (DCP, INT area is fixed)
-	 *
-	 * buffer number 0 - 3 have been reserved for DCP
-	 * see
-	 *	usbhsp_to_bufnmb
-	 */
-	info->bufnmb_last = 4;
 	usbhs_for_each_pipe_with_dcp(pipe, priv, i) {
-		if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_INT))
-			info->bufnmb_last++;
-
 		usbhsp_flags_init(pipe);
 		pipe->fifo = NULL;
 		pipe->mod_private = NULL;
@@ -851,12 +790,13 @@
 	struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv);
 	struct usbhs_pipe *pipe;
 	struct device *dev = usbhs_priv_to_dev(priv);
-	u32 *pipe_type = usbhs_get_dparam(priv, pipe_type);
+	struct renesas_usbhs_driver_pipe_config *pipe_configs =
+					usbhs_get_dparam(priv, pipe_configs);
 	int pipe_size = usbhs_get_dparam(priv, pipe_size);
 	int i;
 
 	/* This driver expects 1st pipe is DCP */
-	if (pipe_type[0] != USB_ENDPOINT_XFER_CONTROL) {
+	if (pipe_configs[0].type != USB_ENDPOINT_XFER_CONTROL) {
 		dev_err(dev, "1st PIPE is not DCP\n");
 		return -EINVAL;
 	}
@@ -876,10 +816,10 @@
 		pipe->priv = priv;
 
 		usbhs_pipe_type(pipe) =
-			pipe_type[i] & USB_ENDPOINT_XFERTYPE_MASK;
+			pipe_configs[i].type & USB_ENDPOINT_XFERTYPE_MASK;
 
 		dev_dbg(dev, "pipe %x\t: %s\n",
-			i, usbhsp_pipe_name[pipe_type[i]]);
+			i, usbhsp_pipe_name[pipe_configs[i].type]);
 	}
 
 	return 0;
diff --git a/drivers/usb/renesas_usbhs/pipe.h b/drivers/usb/renesas_usbhs/pipe.h
index b0bc7b6..3212ab5 100644
--- a/drivers/usb/renesas_usbhs/pipe.h
+++ b/drivers/usb/renesas_usbhs/pipe.h
@@ -46,7 +46,6 @@
 struct usbhs_pipe_info {
 	struct usbhs_pipe *pipe;
 	int size;	/* array size of "pipe" */
-	int bufnmb_last;	/* FIXME : driver needs good allocator */
 
 	int (*dma_map_ctrl)(struct usbhs_pkt *pkt, int map);
 };
diff --git a/include/linux/platform_data/usb-rcar-phy.h b/include/linux/platform_data/usb-rcar-phy.h
deleted file mode 100644
index 8ec6964..0000000
--- a/include/linux/platform_data/usb-rcar-phy.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __USB_RCAR_PHY_H
-#define __USB_RCAR_PHY_H
-
-#include <linux/types.h>
-
-struct rcar_phy_platform_data {
-	bool ferrite_bead:1;	/* (R8A7778 only)			*/
-
-	bool port1_func:1;	/* true: port 1 used by function, false: host */
-	unsigned penc1:1;	/* Output of the PENC1 pin in function mode */
-	struct {		/* Overcurrent pin control for ports 0..2 */
-		bool select_3_3v:1; /* true: USB_OVCn pin, false: OVCn pin */
-				/* Set to false on port 1 in function mode */
-		bool active_high:1; /* true: active  high, false: active low */
-				/* Set to true  on port 1 in function mode */
-	} ovc_pin[3];		/* (R8A7778 only has 2 ports)		*/
-};
-
-#endif /* __USB_RCAR_PHY_H */
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 3d583a1..d82d006 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -402,6 +402,9 @@
 static inline int usb_ep_queue(struct usb_ep *ep,
 			       struct usb_request *req, gfp_t gfp_flags)
 {
+	if (WARN_ON_ONCE(!ep->enabled && ep->address))
+		return -ESHUTDOWN;
+
 	return ep->ops->queue(ep, req, gfp_flags);
 }
 
@@ -1012,6 +1015,9 @@
  * @reset: Invoked on USB bus reset. It is mandatory for all gadget drivers
  *	and should be called in_interrupt.
  * @driver: Driver model state for this driver.
+ * @udc_name: A name of UDC this driver should be bound to. If udc_name is NULL,
+ *	this driver will be bound to any available UDC.
+ * @pending: UDC core private data used for deferred probe of this driver.
  *
  * Devices are disabled till a gadget driver successfully bind()s, which
  * means the driver will handle setup() requests needed to enumerate (and
@@ -1072,6 +1078,9 @@
 
 	/* FIXME support safe rmmod */
 	struct device_driver	driver;
+
+	char			*udc_name;
+	struct list_head	pending;
 };
 
 
@@ -1117,8 +1126,6 @@
 		struct usb_gadget *gadget, void (*release)(struct device *dev));
 extern int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget);
 extern void usb_del_gadget_udc(struct usb_gadget *gadget);
-extern int usb_udc_attach_driver(const char *name,
-		struct usb_gadget_driver *driver);
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/include/linux/usb/musb-omap.h b/include/linux/usb/musb-omap.h
deleted file mode 100644
index 7774c59..0000000
--- a/include/linux/usb/musb-omap.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) 2011-2012 by Texas Instruments
- *
- * The Inventra Controller Driver for Linux is free software; you
- * can redistribute it and/or modify it under the terms of the GNU
- * General Public License version 2 as published by the Free Software
- * Foundation.
- */
-
-#ifndef __MUSB_OMAP_H__
-#define __MUSB_OMAP_H__
-
-enum omap_musb_vbus_id_status {
-	OMAP_MUSB_UNKNOWN = 0,
-	OMAP_MUSB_ID_GROUND,
-	OMAP_MUSB_ID_FLOAT,
-	OMAP_MUSB_VBUS_VALID,
-	OMAP_MUSB_VBUS_OFF,
-};
-
-#if (defined(CONFIG_USB_MUSB_OMAP2PLUS) || \
-				defined(CONFIG_USB_MUSB_OMAP2PLUS_MODULE))
-void omap_musb_mailbox(enum omap_musb_vbus_id_status status);
-#else
-static inline void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
-{
-}
-#endif
-
-#endif	/* __MUSB_OMAP_H__ */
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index fa6dc13..96ddfb7 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -133,6 +133,21 @@
 	const void	*platform_ops;
 };
 
+enum musb_vbus_id_status {
+	MUSB_UNKNOWN = 0,
+	MUSB_ID_GROUND,
+	MUSB_ID_FLOAT,
+	MUSB_VBUS_VALID,
+	MUSB_VBUS_OFF,
+};
+
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
+void musb_mailbox(enum musb_vbus_id_status status);
+#else
+static inline void musb_mailbox(enum musb_vbus_id_status status)
+{
+}
+#endif
 
 /* TUSB 6010 support */
 
diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h
index c3fe9e4..974bce9 100644
--- a/include/linux/usb/of.h
+++ b/include/linux/usb/of.h
@@ -12,10 +12,16 @@
 #include <linux/usb/phy.h>
 
 #if IS_ENABLED(CONFIG_OF)
+enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *phy_np);
 bool of_usb_host_tpl_support(struct device_node *np);
 int of_usb_update_otg_caps(struct device_node *np,
 			struct usb_otg_caps *otg_caps);
 #else
+static inline enum usb_dr_mode
+of_usb_get_dr_mode_by_phy(struct device_node *phy_np)
+{
+	return USB_DR_MODE_UNKNOWN;
+}
 static inline bool of_usb_host_tpl_support(struct device_node *np)
 {
 	return false;
diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h
index bfb7472..4db191f 100644
--- a/include/linux/usb/renesas_usbhs.h
+++ b/include/linux/usb/renesas_usbhs.h
@@ -105,12 +105,26 @@
  * some register needs USB chip specific parameters.
  * This struct show it to driver
  */
+
+struct renesas_usbhs_driver_pipe_config {
+	u8 type;	/* USB_ENDPOINT_XFER_xxx */
+	u16 bufsize;
+	u8 bufnum;
+	bool double_buf;
+};
+#define RENESAS_USBHS_PIPE(_type, _size, _num, _double_buf)	{	\
+			.type = (_type),		\
+			.bufsize = (_size),		\
+			.bufnum = (_num),		\
+			.double_buf = (_double_buf),	\
+	}
+
 struct renesas_usbhs_driver_param {
 	/*
 	 * pipe settings
 	 */
-	u32 *pipe_type; /* array of USB_ENDPOINT_XFER_xxx (from ep0) */
-	int pipe_size; /* pipe_type array size */
+	struct renesas_usbhs_driver_pipe_config *pipe_configs;
+	int pipe_size; /* pipe_configs array size */
 
 	/*
 	 * option: