x86, mce: squash mce_intel.c into therm_throt.c
move intel_init_thermal() into therm_throt.c
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index b3792b1..7a508aa 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -16,13 +16,21 @@
#include <linux/interrupt.h>
#include <linux/notifier.h>
#include <linux/jiffies.h>
+#include <linux/kernel.h>
#include <linux/percpu.h>
#include <linux/sysdev.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/smp.h>
#include <linux/cpu.h>
#include <asm/therm_throt.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/apic.h>
#include <asm/idle.h>
#include <asm/mce.h>
+#include <asm/msr.h>
/* How long to wait between reporting thermal events */
#define CHECK_INTERVAL (300 * HZ)
@@ -227,3 +235,61 @@
{
smp_thermal_vector = intel_thermal_interrupt;
}
+
+void intel_init_thermal(struct cpuinfo_x86 *c)
+{
+ unsigned int cpu = smp_processor_id();
+ int tm2 = 0;
+ u32 l, h;
+
+ /* Thermal monitoring depends on ACPI and clock modulation*/
+ if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC))
+ return;
+
+ /*
+ * First check if its enabled already, in which case there might
+ * be some SMM goo which handles it, so we can't even put a handler
+ * since it might be delivered via SMI already:
+ */
+ rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+ h = apic_read(APIC_LVTTHMR);
+ if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) {
+ printk(KERN_DEBUG
+ "CPU%d: Thermal monitoring handled by SMI\n", cpu);
+ return;
+ }
+
+ if (cpu_has(c, X86_FEATURE_TM2) && (l & MSR_IA32_MISC_ENABLE_TM2))
+ tm2 = 1;
+
+ /* Check whether a vector already exists */
+ if (h & APIC_VECTOR_MASK) {
+ printk(KERN_DEBUG
+ "CPU%d: Thermal LVT vector (%#x) already installed\n",
+ cpu, (h & APIC_VECTOR_MASK));
+ return;
+ }
+
+ /* We'll mask the thermal vector in the lapic till we're ready: */
+ h = THERMAL_APIC_VECTOR | APIC_DM_FIXED | APIC_LVT_MASKED;
+ apic_write(APIC_LVTTHMR, h);
+
+ rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
+ wrmsr(MSR_IA32_THERM_INTERRUPT,
+ l | (THERM_INT_LOW_ENABLE | THERM_INT_HIGH_ENABLE), h);
+
+ intel_set_thermal_handler();
+
+ rdmsr(MSR_IA32_MISC_ENABLE, l, h);
+ wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h);
+
+ /* Unmask the thermal vector: */
+ l = apic_read(APIC_LVTTHMR);
+ apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
+
+ printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n",
+ cpu, tm2 ? "TM2" : "TM1");
+
+ /* enable thermal throttle processing */
+ atomic_set(&therm_throt_en, 1);
+}
