mfd: Core support for the WM8350 AudioPlus PMIC
The WM8350 is an integrated audio and power management subsystem
intended for use as the primary PMIC in mobile multimedia applications.
The WM8350 can be controlled via either I2C or SPI - the control
interface is provided by a separate module in order to allow greatest
flexibility in configuring the kernel.
This driver was originally written by Liam Girdwood and has since been
updated to current kernel APIs and split up for submission by me. All
the heavy lifting here was done by Liam.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index a3ddf65..5d7bbf4 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -95,6 +95,25 @@
the device, additional drivers must be enabled in order to use
the functionality of the device.
+config MFD_WM8350
+ tristate
+
+config MFD_WM8350_CONFIG_MODE_0
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8350_CONFIG_MODE_1
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8350_CONFIG_MODE_2
+ bool
+ depends on MFD_WM8350
+
+config MFD_WM8350_CONFIG_MODE_3
+ bool
+ depends on MFD_WM8350
+
endmenu
menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 1624c7d..bec1e92 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -13,6 +13,8 @@
obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o
obj-$(CONFIG_MFD_WM8400) += wm8400-core.o
+wm8350-objs := wm8350-core.o wm8350-regmap.o
+obj-$(CONFIG_MFD_WM8350) += wm8350.o
obj-$(CONFIG_MFD_CORE) += mfd-core.o
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
new file mode 100644
index 0000000..c7552c0
--- /dev/null
+++ b/drivers/mfd/wm8350-core.c
@@ -0,0 +1,456 @@
+/*
+ * wm8350-core.c -- Device access for Wolfson WM8350
+ *
+ * Copyright 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood, Mark Brown
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/audio.h>
+#include <linux/mfd/wm8350/gpio.h>
+#include <linux/mfd/wm8350/pmic.h>
+#include <linux/mfd/wm8350/supply.h>
+
+#define WM8350_UNLOCK_KEY 0x0013
+#define WM8350_LOCK_KEY 0x0000
+
+#define WM8350_CLOCK_CONTROL_1 0x28
+#define WM8350_AIF_TEST 0x74
+
+/* debug */
+#define WM8350_BUS_DEBUG 0
+#if WM8350_BUS_DEBUG
+#define dump(regs, src) do { \
+ int i_; \
+ u16 *src_ = src; \
+ printk(KERN_DEBUG); \
+ for (i_ = 0; i_ < regs; i_++) \
+ printk(" 0x%4.4x", *src_++); \
+ printk("\n"); \
+} while (0);
+#else
+#define dump(bytes, src)
+#endif
+
+#define WM8350_LOCK_DEBUG 0
+#if WM8350_LOCK_DEBUG
+#define ldbg(format, arg...) printk(format, ## arg)
+#else
+#define ldbg(format, arg...)
+#endif
+
+/*
+ * WM8350 Device IO
+ */
+static DEFINE_MUTEX(io_mutex);
+static DEFINE_MUTEX(reg_lock_mutex);
+static DEFINE_MUTEX(auxadc_mutex);
+
+/* Perform a physical read from the device.
+ */
+static int wm8350_phys_read(struct wm8350 *wm8350, u8 reg, int num_regs,
+ u16 *dest)
+{
+ int i, ret;
+ int bytes = num_regs * 2;
+
+ dev_dbg(wm8350->dev, "volatile read\n");
+ ret = wm8350->read_dev(wm8350, reg, bytes, (char *)dest);
+
+ for (i = reg; i < reg + num_regs; i++) {
+ /* Cache is CPU endian */
+ dest[i - reg] = be16_to_cpu(dest[i - reg]);
+
+ /* Satisfy non-volatile bits from cache */
+ dest[i - reg] &= wm8350_reg_io_map[i].vol;
+ dest[i - reg] |= wm8350->reg_cache[i];
+
+ /* Mask out non-readable bits */
+ dest[i - reg] &= wm8350_reg_io_map[i].readable;
+ }
+
+ dump(num_regs, dest);
+
+ return ret;
+}
+
+static int wm8350_read(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *dest)
+{
+ int i;
+ int end = reg + num_regs;
+ int ret = 0;
+ int bytes = num_regs * 2;
+
+ if (wm8350->read_dev == NULL)
+ return -ENODEV;
+
+ if ((reg + num_regs - 1) > WM8350_MAX_REGISTER) {
+ dev_err(wm8350->dev, "invalid reg %x\n",
+ reg + num_regs - 1);
+ return -EINVAL;
+ }
+
+ dev_dbg(wm8350->dev,
+ "%s R%d(0x%2.2x) %d regs\n", __func__, reg, reg, num_regs);
+
+#if WM8350_BUS_DEBUG
+ /* we can _safely_ read any register, but warn if read not supported */
+ for (i = reg; i < end; i++) {
+ if (!wm8350_reg_io_map[i].readable)
+ dev_warn(wm8350->dev,
+ "reg R%d is not readable\n", i);
+ }
+#endif
+
+ /* if any volatile registers are required, then read back all */
+ for (i = reg; i < end; i++)
+ if (wm8350_reg_io_map[i].vol)
+ return wm8350_phys_read(wm8350, reg, num_regs, dest);
+
+ /* no volatiles, then cache is good */
+ dev_dbg(wm8350->dev, "cache read\n");
+ memcpy(dest, &wm8350->reg_cache[reg], bytes);
+ dump(num_regs, dest);
+ return ret;
+}
+
+static inline int is_reg_locked(struct wm8350 *wm8350, u8 reg)
+{
+ if (reg == WM8350_SECURITY ||
+ wm8350->reg_cache[WM8350_SECURITY] == WM8350_UNLOCK_KEY)
+ return 0;
+
+ if ((reg == WM8350_GPIO_CONFIGURATION_I_O) ||
+ (reg >= WM8350_GPIO_FUNCTION_SELECT_1 &&
+ reg <= WM8350_GPIO_FUNCTION_SELECT_4) ||
+ (reg >= WM8350_BATTERY_CHARGER_CONTROL_1 &&
+ reg <= WM8350_BATTERY_CHARGER_CONTROL_3))
+ return 1;
+ return 0;
+}
+
+static int wm8350_write(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *src)
+{
+ int i;
+ int end = reg + num_regs;
+ int bytes = num_regs * 2;
+
+ if (wm8350->write_dev == NULL)
+ return -ENODEV;
+
+ if ((reg + num_regs - 1) > WM8350_MAX_REGISTER) {
+ dev_err(wm8350->dev, "invalid reg %x\n",
+ reg + num_regs - 1);
+ return -EINVAL;
+ }
+
+ /* it's generally not a good idea to write to RO or locked registers */
+ for (i = reg; i < end; i++) {
+ if (!wm8350_reg_io_map[i].writable) {
+ dev_err(wm8350->dev,
+ "attempted write to read only reg R%d\n", i);
+ return -EINVAL;
+ }
+
+ if (is_reg_locked(wm8350, i)) {
+ dev_err(wm8350->dev,
+ "attempted write to locked reg R%d\n", i);
+ return -EINVAL;
+ }
+
+ src[i - reg] &= wm8350_reg_io_map[i].writable;
+
+ wm8350->reg_cache[i] =
+ (wm8350->reg_cache[i] & ~wm8350_reg_io_map[i].writable)
+ | src[i - reg];
+
+ src[i - reg] = cpu_to_be16(src[i - reg]);
+ }
+
+ /* Actually write it out */
+ return wm8350->write_dev(wm8350, reg, bytes, (char *)src);
+}
+
+/*
+ * Safe read, modify, write methods
+ */
+int wm8350_clear_bits(struct wm8350 *wm8350, u16 reg, u16 mask)
+{
+ u16 data;
+ int err;
+
+ mutex_lock(&io_mutex);
+ err = wm8350_read(wm8350, reg, 1, &data);
+ if (err) {
+ dev_err(wm8350->dev, "read from reg R%d failed\n", reg);
+ goto out;
+ }
+
+ data &= ~mask;
+ err = wm8350_write(wm8350, reg, 1, &data);
+ if (err)
+ dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
+out:
+ mutex_unlock(&io_mutex);
+ return err;
+}
+EXPORT_SYMBOL_GPL(wm8350_clear_bits);
+
+int wm8350_set_bits(struct wm8350 *wm8350, u16 reg, u16 mask)
+{
+ u16 data;
+ int err;
+
+ mutex_lock(&io_mutex);
+ err = wm8350_read(wm8350, reg, 1, &data);
+ if (err) {
+ dev_err(wm8350->dev, "read from reg R%d failed\n", reg);
+ goto out;
+ }
+
+ data |= mask;
+ err = wm8350_write(wm8350, reg, 1, &data);
+ if (err)
+ dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
+out:
+ mutex_unlock(&io_mutex);
+ return err;
+}
+EXPORT_SYMBOL_GPL(wm8350_set_bits);
+
+u16 wm8350_reg_read(struct wm8350 *wm8350, int reg)
+{
+ u16 data;
+ int err;
+
+ mutex_lock(&io_mutex);
+ err = wm8350_read(wm8350, reg, 1, &data);
+ if (err)
+ dev_err(wm8350->dev, "read from reg R%d failed\n", reg);
+
+ mutex_unlock(&io_mutex);
+ return data;
+}
+EXPORT_SYMBOL_GPL(wm8350_reg_read);
+
+int wm8350_reg_write(struct wm8350 *wm8350, int reg, u16 val)
+{
+ int ret;
+ u16 data = val;
+
+ mutex_lock(&io_mutex);
+ ret = wm8350_write(wm8350, reg, 1, &data);
+ if (ret)
+ dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
+ mutex_unlock(&io_mutex);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wm8350_reg_write);
+
+int wm8350_block_read(struct wm8350 *wm8350, int start_reg, int regs,
+ u16 *dest)
+{
+ int err = 0;
+
+ mutex_lock(&io_mutex);
+ err = wm8350_read(wm8350, start_reg, regs, dest);
+ if (err)
+ dev_err(wm8350->dev, "block read starting from R%d failed\n",
+ start_reg);
+ mutex_unlock(&io_mutex);
+ return err;
+}
+EXPORT_SYMBOL_GPL(wm8350_block_read);
+
+int wm8350_block_write(struct wm8350 *wm8350, int start_reg, int regs,
+ u16 *src)
+{
+ int ret = 0;
+
+ mutex_lock(&io_mutex);
+ ret = wm8350_write(wm8350, start_reg, regs, src);
+ if (ret)
+ dev_err(wm8350->dev, "block write starting at R%d failed\n",
+ start_reg);
+ mutex_unlock(&io_mutex);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wm8350_block_write);
+
+int wm8350_reg_lock(struct wm8350 *wm8350)
+{
+ u16 key = WM8350_LOCK_KEY;
+ int ret;
+
+ ldbg(__func__);
+ mutex_lock(&io_mutex);
+ ret = wm8350_write(wm8350, WM8350_SECURITY, 1, &key);
+ if (ret)
+ dev_err(wm8350->dev, "lock failed\n");
+ mutex_unlock(&io_mutex);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wm8350_reg_lock);
+
+int wm8350_reg_unlock(struct wm8350 *wm8350)
+{
+ u16 key = WM8350_UNLOCK_KEY;
+ int ret;
+
+ ldbg(__func__);
+ mutex_lock(&io_mutex);
+ ret = wm8350_write(wm8350, WM8350_SECURITY, 1, &key);
+ if (ret)
+ dev_err(wm8350->dev, "unlock failed\n");
+ mutex_unlock(&io_mutex);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wm8350_reg_unlock);
+
+/*
+ * Cache is always host endian.
+ */
+static int wm8350_create_cache(struct wm8350 *wm8350, int mode)
+{
+ int i, ret = 0;
+ u16 value;
+ const u16 *reg_map;
+
+ switch (mode) {
+#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0
+ case 0:
+ reg_map = wm8350_mode0_defaults;
+ break;
+#endif
+#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_1
+ case 1:
+ reg_map = wm8350_mode1_defaults;
+ break;
+#endif
+#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_2
+ case 2:
+ reg_map = wm8350_mode2_defaults;
+ break;
+#endif
+#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_3
+ case 3:
+ reg_map = wm8350_mode3_defaults;
+ break;
+#endif
+ default:
+ dev_err(wm8350->dev, "Configuration mode %d not supported\n",
+ mode);
+ return -EINVAL;
+ }
+
+ wm8350->reg_cache =
+ kzalloc(sizeof(u16) * (WM8350_MAX_REGISTER + 1), GFP_KERNEL);
+ if (wm8350->reg_cache == NULL)
+ return -ENOMEM;
+
+ /* Read the initial cache state back from the device - this is
+ * a PMIC so the device many not be in a virgin state and we
+ * can't rely on the silicon values.
+ */
+ for (i = 0; i < WM8350_MAX_REGISTER; i++) {
+ /* audio register range */
+ if (wm8350_reg_io_map[i].readable &&
+ (i < WM8350_CLOCK_CONTROL_1 || i > WM8350_AIF_TEST)) {
+ ret = wm8350->read_dev(wm8350, i, 2, (char *)&value);
+ if (ret < 0) {
+ dev_err(wm8350->dev,
+ "failed to read initial cache value\n");
+ goto out;
+ }
+ value = be16_to_cpu(value);
+ value &= wm8350_reg_io_map[i].readable;
+ wm8350->reg_cache[i] = value;
+ } else
+ wm8350->reg_cache[i] = reg_map[i];
+ }
+
+out:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wm8350_create_cache);
+
+int wm8350_device_init(struct wm8350 *wm8350)
+{
+ int ret = -EINVAL;
+ u16 id1, id2, mask, mode;
+
+ /* get WM8350 revision and config mode */
+ wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1);
+ wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2);
+
+ id1 = be16_to_cpu(id1);
+ id2 = be16_to_cpu(id2);
+
+ if (id1 == 0x0)
+ dev_info(wm8350->dev, "Found Rev C device\n");
+ else if (id1 == 0x6143) {
+ switch ((id2 & WM8350_CHIP_REV_MASK) >> 12) {
+ case WM8350_REV_E:
+ dev_info(wm8350->dev, "Found Rev E device\n");
+ wm8350->rev = WM8350_REV_E;
+ break;
+ case WM8350_REV_F:
+ dev_info(wm8350->dev, "Found Rev F device\n");
+ wm8350->rev = WM8350_REV_F;
+ break;
+ case WM8350_REV_G:
+ dev_info(wm8350->dev, "Found Rev G device\n");
+ wm8350->rev = WM8350_REV_G;
+ break;
+ default:
+ /* For safety we refuse to run on unknown hardware */
+ dev_info(wm8350->dev, "Found unknown rev\n");
+ ret = -ENODEV;
+ goto err;
+ }
+ } else {
+ dev_info(wm8350->dev, "Device with ID %x is not a WM8350\n",
+ id1);
+ ret = -ENODEV;
+ goto err;
+ }
+
+ mode = id2 & WM8350_CONF_STS_MASK >> 10;
+ mask = id2 & WM8350_CUST_ID_MASK;
+ dev_info(wm8350->dev, "Config mode %d, ROM mask %d\n", mode, mask);
+
+ ret = wm8350_create_cache(wm8350, mode);
+ if (ret < 0) {
+ printk(KERN_ERR "wm8350: failed to create register cache\n");
+ return ret;
+ }
+
+ return 0;
+
+err:
+ kfree(wm8350->reg_cache);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wm8350_device_init);
+
+void wm8350_device_exit(struct wm8350 *wm8350)
+{
+ kfree(wm8350->reg_cache);
+}
+EXPORT_SYMBOL_GPL(wm8350_device_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/wm8350-regmap.c b/drivers/mfd/wm8350-regmap.c
new file mode 100644
index 0000000..974678d
--- /dev/null
+++ b/drivers/mfd/wm8350-regmap.c
@@ -0,0 +1,1347 @@
+/*
+ * wm8350-regmap.c -- Wolfson Microelectronics WM8350 register map
+ *
+ * This file splits out the tables describing the defaults and access
+ * status of the WM8350 registers since they are rather large.
+ *
+ * Copyright 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/mfd/wm8350/core.h>
+
+#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0
+
+#undef WM8350_HAVE_CONFIG_MODE
+#define WM8350_HAVE_CONFIG_MODE
+
+const u16 wm8350_mode0_defaults[] = {
+ 0x17FF, /* R0 - Reset/ID */
+ 0x1000, /* R1 - ID */
+ 0x0000, /* R2 */
+ 0x1002, /* R3 - System Control 1 */
+ 0x0004, /* R4 - System Control 2 */
+ 0x0000, /* R5 - System Hibernate */
+ 0x8A00, /* R6 - Interface Control */
+ 0x0000, /* R7 */
+ 0x8000, /* R8 - Power mgmt (1) */
+ 0x0000, /* R9 - Power mgmt (2) */
+ 0x0000, /* R10 - Power mgmt (3) */
+ 0x2000, /* R11 - Power mgmt (4) */
+ 0x0E00, /* R12 - Power mgmt (5) */
+ 0x0000, /* R13 - Power mgmt (6) */
+ 0x0000, /* R14 - Power mgmt (7) */
+ 0x0000, /* R15 */
+ 0x0000, /* R16 - RTC Seconds/Minutes */
+ 0x0100, /* R17 - RTC Hours/Day */
+ 0x0101, /* R18 - RTC Date/Month */
+ 0x1400, /* R19 - RTC Year */
+ 0x0000, /* R20 - Alarm Seconds/Minutes */
+ 0x0000, /* R21 - Alarm Hours/Day */
+ 0x0000, /* R22 - Alarm Date/Month */
+ 0x0320, /* R23 - RTC Time Control */
+ 0x0000, /* R24 - System Interrupts */
+ 0x0000, /* R25 - Interrupt Status 1 */
+ 0x0000, /* R26 - Interrupt Status 2 */
+ 0x0000, /* R27 - Power Up Interrupt Status */
+ 0x0000, /* R28 - Under Voltage Interrupt status */
+ 0x0000, /* R29 - Over Current Interrupt status */
+ 0x0000, /* R30 - GPIO Interrupt Status */
+ 0x0000, /* R31 - Comparator Interrupt Status */
+ 0x3FFF, /* R32 - System Interrupts Mask */
+ 0x0000, /* R33 - Interrupt Status 1 Mask */
+ 0x0000, /* R34 - Interrupt Status 2 Mask */
+ 0x0000, /* R35 - Power Up Interrupt Status Mask */
+ 0x0000, /* R36 - Under Voltage Interrupt status Mask */
+ 0x0000, /* R37 - Over Current Interrupt status Mask */
+ 0x0000, /* R38 - GPIO Interrupt Status Mask */
+ 0x0000, /* R39 - Comparator Interrupt Status Mask */
+ 0x0040, /* R40 - Clock Control 1 */
+ 0x0000, /* R41 - Clock Control 2 */
+ 0x3B00, /* R42 - FLL Control 1 */
+ 0x7086, /* R43 - FLL Control 2 */
+ 0xC226, /* R44 - FLL Control 3 */
+ 0x0000, /* R45 - FLL Control 4 */
+ 0x0000, /* R46 */
+ 0x0000, /* R47 */
+ 0x0000, /* R48 - DAC Control */
+ 0x0000, /* R49 */
+ 0x00C0, /* R50 - DAC Digital Volume L */
+ 0x00C0, /* R51 - DAC Digital Volume R */
+ 0x0000, /* R52 */
+ 0x0040, /* R53 - DAC LR Rate */
+ 0x0000, /* R54 - DAC Clock Control */
+ 0x0000, /* R55 */
+ 0x0000, /* R56 */
+ 0x0000, /* R57 */
+ 0x4000, /* R58 - DAC Mute */
+ 0x0000, /* R59 - DAC Mute Volume */
+ 0x0000, /* R60 - DAC Side */
+ 0x0000, /* R61 */
+ 0x0000, /* R62 */
+ 0x0000, /* R63 */
+ 0x8000, /* R64 - ADC Control */
+ 0x0000, /* R65 */
+ 0x00C0, /* R66 - ADC Digital Volume L */
+ 0x00C0, /* R67 - ADC Digital Volume R */
+ 0x0000, /* R68 - ADC Divider */
+ 0x0000, /* R69 */
+ 0x0040, /* R70 - ADC LR Rate */
+ 0x0000, /* R71 */
+ 0x0303, /* R72 - Input Control */
+ 0x0000, /* R73 - IN3 Input Control */
+ 0x0000, /* R74 - Mic Bias Control */
+ 0x0000, /* R75 */
+ 0x0000, /* R76 - Output Control */
+ 0x0000, /* R77 - Jack Detect */
+ 0x0000, /* R78 - Anti Pop Control */
+ 0x0000, /* R79 */
+ 0x0040, /* R80 - Left Input Volume */
+ 0x0040, /* R81 - Right Input Volume */
+ 0x0000, /* R82 */
+ 0x0000, /* R83 */
+ 0x0000, /* R84 */
+ 0x0000, /* R85 */
+ 0x0000, /* R86 */
+ 0x0000, /* R87 */
+ 0x0800, /* R88 - Left Mixer Control */
+ 0x1000, /* R89 - Right Mixer Control */
+ 0x0000, /* R90 */
+ 0x0000, /* R91 */
+ 0x0000, /* R92 - OUT3 Mixer Control */
+ 0x0000, /* R93 - OUT4 Mixer Control */
+ 0x0000, /* R94 */
+ 0x0000, /* R95 */
+ 0x0000, /* R96 - Output Left Mixer Volume */
+ 0x0000, /* R97 - Output Right Mixer Volume */
+ 0x0000, /* R98 - Input Mixer Volume L */
+ 0x0000, /* R99 - Input Mixer Volume R */
+ 0x0000, /* R100 - Input Mixer Volume */
+ 0x0000, /* R101 */
+ 0x0000, /* R102 */
+ 0x0000, /* R103 */
+ 0x00E4, /* R104 - LOUT1 Volume */
+ 0x00E4, /* R105 - ROUT1 Volume */
+ 0x00E4, /* R106 - LOUT2 Volume */
+ 0x02E4, /* R107 - ROUT2 Volume */
+ 0x0000, /* R108 */
+ 0x0000, /* R109 */
+ 0x0000, /* R110 */
+ 0x0000, /* R111 - BEEP Volume */
+ 0x0A00, /* R112 - AI Formating */
+ 0x0000, /* R113 - ADC DAC COMP */
+ 0x0020, /* R114 - AI ADC Control */
+ 0x0020, /* R115 - AI DAC Control */
+ 0x0000, /* R116 - AIF Test */
+ 0x0000, /* R117 */
+ 0x0000, /* R118 */
+ 0x0000, /* R119 */
+ 0x0000, /* R120 */
+ 0x0000, /* R121 */
+ 0x0000, /* R122 */
+ 0x0000, /* R123 */
+ 0x0000, /* R124 */
+ 0x0000, /* R125 */
+ 0x0000, /* R126 */
+ 0x0000, /* R127 */
+ 0x1FFF, /* R128 - GPIO Debounce */
+ 0x0000, /* R129 - GPIO Pin pull up Control */
+ 0x03FC, /* R130 - GPIO Pull down Control */
+ 0x0000, /* R131 - GPIO Interrupt Mode */
+ 0x0000, /* R132 */
+ 0x0000, /* R133 - GPIO Control */
+ 0x0FFC, /* R134 - GPIO Configuration (i/o) */
+ 0x0FFC, /* R135 - GPIO Pin Polarity / Type */
+ 0x0000, /* R136 */
+ 0x0000, /* R137 */
+ 0x0000, /* R138 */
+ 0x0000, /* R139 */
+ 0x0013, /* R140 - GPIO Function Select 1 */
+ 0x0000, /* R141 - GPIO Function Select 2 */
+ 0x0000, /* R142 - GPIO Function Select 3 */
+ 0x0003, /* R143 - GPIO Function Select 4 */
+ 0x0000, /* R144 - Digitiser Control (1) */
+ 0x0002, /* R145 - Digitiser Control (2) */
+ 0x0000, /* R146 */
+ 0x0000, /* R147 */
+ 0x0000, /* R148 */
+ 0x0000, /* R149 */
+ 0x0000, /* R150 */
+ 0x0000, /* R151 */
+ 0x7000, /* R152 - AUX1 Readback */
+ 0x7000, /* R153 - AUX2 Readback */
+ 0x7000, /* R154 - AUX3 Readback */
+ 0x7000, /* R155 - AUX4 Readback */
+ 0x0000, /* R156 - USB Voltage Readback */
+ 0x0000, /* R157 - LINE Voltage Readback */
+ 0x0000, /* R158 - BATT Voltage Readback */
+ 0x0000, /* R159 - Chip Temp Readback */
+ 0x0000, /* R160 */
+ 0x0000, /* R161 */
+ 0x0000, /* R162 */
+ 0x0000, /* R163 - Generic Comparator Control */
+ 0x0000, /* R164 - Generic comparator 1 */
+ 0x0000, /* R165 - Generic comparator 2 */
+ 0x0000, /* R166 - Generic comparator 3 */
+ 0x0000, /* R167 - Generic comparator 4 */
+ 0xA00F, /* R168 - Battery Charger Control 1 */
+ 0x0B06, /* R169 - Battery Charger Control 2 */
+ 0x0000, /* R170 - Battery Charger Control 3 */
+ 0x0000, /* R171 */
+ 0x0000, /* R172 - Current Sink Driver A */
+ 0x0000, /* R173 - CSA Flash control */
+ 0x0000, /* R174 - Current Sink Driver B */
+ 0x0000, /* R175 - CSB Flash control */
+ 0x0000, /* R176 - DCDC/LDO requested */
+ 0x002D, /* R177 - DCDC Active options */
+ 0x0000, /* R178 - DCDC Sleep options */
+ 0x0025, /* R179 - Power-check comparator */
+ 0x000E, /* R180 - DCDC1 Control */
+ 0x0000, /* R181 - DCDC1 Timeouts */
+ 0x1006, /* R182 - DCDC1 Low Power */
+ 0x0018, /* R183 - DCDC2 Control */
+ 0x0000, /* R184 - DCDC2 Timeouts */
+ 0x0000, /* R185 */
+ 0x0000, /* R186 - DCDC3 Control */
+ 0x0000, /* R187 - DCDC3 Timeouts */
+ 0x0006, /* R188 - DCDC3 Low Power */
+ 0x0000, /* R189 - DCDC4 Control */
+ 0x0000, /* R190 - DCDC4 Timeouts */
+ 0x0006, /* R191 - DCDC4 Low Power */
+ 0x0008, /* R192 - DCDC5 Control */
+ 0x0000, /* R193 - DCDC5 Timeouts */
+ 0x0000, /* R194 */
+ 0x0000, /* R195 - DCDC6 Control */
+ 0x0000, /* R196 - DCDC6 Timeouts */
+ 0x0006, /* R197 - DCDC6 Low Power */
+ 0x0000, /* R198 */
+ 0x0003, /* R199 - Limit Switch Control */
+ 0x001C, /* R200 - LDO1 Control */
+ 0x0000, /* R201 - LDO1 Timeouts */
+ 0x001C, /* R202 - LDO1 Low Power */
+ 0x001B, /* R203 - LDO2 Control */
+ 0x0000, /* R204 - LDO2 Timeouts */
+ 0x001C, /* R205 - LDO2 Low Power */
+ 0x001B, /* R206 - LDO3 Control */
+ 0x0000, /* R207 - LDO3 Timeouts */
+ 0x001C, /* R208 - LDO3 Low Power */
+ 0x001B, /* R209 - LDO4 Control */
+ 0x0000, /* R210 - LDO4 Timeouts */
+ 0x001C, /* R211 - LDO4 Low Power */
+ 0x0000, /* R212 */
+ 0x0000, /* R213 */
+ 0x0000, /* R214 */
+ 0x0000, /* R215 - VCC_FAULT Masks */
+ 0x001F, /* R216 - Main Bandgap Control */
+ 0x0000, /* R217 - OSC Control */
+ 0x9000, /* R218 - RTC Tick Control */
+ 0x0000, /* R219 */
+ 0x4000, /* R220 - RAM BIST 1 */
+ 0x0000, /* R221 */
+ 0x0000, /* R222 */
+ 0x0000, /* R223 */
+ 0x0000, /* R224 */
+ 0x0000, /* R225 - DCDC/LDO status */
+ 0x0000, /* R226 */
+ 0x0000, /* R227 */
+ 0x0000, /* R228 */
+ 0x0000, /* R229 */
+ 0xE000, /* R230 - GPIO Pin Status */
+ 0x0000, /* R231 */
+ 0x0000, /* R232 */
+ 0x0000, /* R233 */
+ 0x0000, /* R234 */
+ 0x0000, /* R235 */
+ 0x0000, /* R236 */
+ 0x0000, /* R237 */
+ 0x0000, /* R238 */
+ 0x0000, /* R239 */
+ 0x0000, /* R240 */
+ 0x0000, /* R241 */
+ 0x0000, /* R242 */
+ 0x0000, /* R243 */
+ 0x0000, /* R244 */
+ 0x0000, /* R245 */
+ 0x0000, /* R246 */
+ 0x0000, /* R247 */
+ 0x0000, /* R248 */
+ 0x0000, /* R249 */
+ 0x0000, /* R250 */
+ 0x0000, /* R251 */
+ 0x0000, /* R252 */
+ 0x0000, /* R253 */
+ 0x0000, /* R254 */
+ 0x0000, /* R255 */
+};
+#endif
+
+#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_1
+
+#undef WM8350_HAVE_CONFIG_MODE
+#define WM8350_HAVE_CONFIG_MODE
+
+const u16 wm8350_mode1_defaults[] = {
+ 0x17FF, /* R0 - Reset/ID */
+ 0x1000, /* R1 - ID */
+ 0x0000, /* R2 */
+ 0x1002, /* R3 - System Control 1 */
+ 0x0014, /* R4 - System Control 2 */
+ 0x0000, /* R5 - System Hibernate */
+ 0x8A00, /* R6 - Interface Control */
+ 0x0000, /* R7 */
+ 0x8000, /* R8 - Power mgmt (1) */
+ 0x0000, /* R9 - Power mgmt (2) */
+ 0x0000, /* R10 - Power mgmt (3) */
+ 0x2000, /* R11 - Power mgmt (4) */
+ 0x0E00, /* R12 - Power mgmt (5) */
+ 0x0000, /* R13 - Power mgmt (6) */
+ 0x0000, /* R14 - Power mgmt (7) */
+ 0x0000, /* R15 */
+ 0x0000, /* R16 - RTC Seconds/Minutes */
+ 0x0100, /* R17 - RTC Hours/Day */
+ 0x0101, /* R18 - RTC Date/Month */
+ 0x1400, /* R19 - RTC Year */
+ 0x0000, /* R20 - Alarm Seconds/Minutes */
+ 0x0000, /* R21 - Alarm Hours/Day */
+ 0x0000, /* R22 - Alarm Date/Month */
+ 0x0320, /* R23 - RTC Time Control */
+ 0x0000, /* R24 - System Interrupts */
+ 0x0000, /* R25 - Interrupt Status 1 */
+ 0x0000, /* R26 - Interrupt Status 2 */
+ 0x0000, /* R27 - Power Up Interrupt Status */
+ 0x0000, /* R28 - Under Voltage Interrupt status */
+ 0x0000, /* R29 - Over Current Interrupt status */
+ 0x0000, /* R30 - GPIO Interrupt Status */
+ 0x0000, /* R31 - Comparator Interrupt Status */
+ 0x3FFF, /* R32 - System Interrupts Mask */
+ 0x0000, /* R33 - Interrupt Status 1 Mask */
+ 0x0000, /* R34 - Interrupt Status 2 Mask */
+ 0x0000, /* R35 - Power Up Interrupt Status Mask */
+ 0x0000, /* R36 - Under Voltage Interrupt status Mask */
+ 0x0000, /* R37 - Over Current Interrupt status Mask */
+ 0x0000, /* R38 - GPIO Interrupt Status Mask */
+ 0x0000, /* R39 - Comparator Interrupt Status Mask */
+ 0x0040, /* R40 - Clock Control 1 */
+ 0x0000, /* R41 - Clock Control 2 */
+ 0x3B00, /* R42 - FLL Control 1 */
+ 0x7086, /* R43 - FLL Control 2 */
+ 0xC226, /* R44 - FLL Control 3 */
+ 0x0000, /* R45 - FLL Control 4 */
+ 0x0000, /* R46 */
+ 0x0000, /* R47 */
+ 0x0000, /* R48 - DAC Control */
+ 0x0000, /* R49 */
+ 0x00C0, /* R50 - DAC Digital Volume L */
+ 0x00C0, /* R51 - DAC Digital Volume R */
+ 0x0000, /* R52 */
+ 0x0040, /* R53 - DAC LR Rate */
+ 0x0000, /* R54 - DAC Clock Control */
+ 0x0000, /* R55 */
+ 0x0000, /* R56 */
+ 0x0000, /* R57 */
+ 0x4000, /* R58 - DAC Mute */
+ 0x0000, /* R59 - DAC Mute Volume */
+ 0x0000, /* R60 - DAC Side */
+ 0x0000, /* R61 */
+ 0x0000, /* R62 */
+ 0x0000, /* R63 */
+ 0x8000, /* R64 - ADC Control */
+ 0x0000, /* R65 */
+ 0x00C0, /* R66 - ADC Digital Volume L */
+ 0x00C0, /* R67 - ADC Digital Volume R */
+ 0x0000, /* R68 - ADC Divider */
+ 0x0000, /* R69 */
+ 0x0040, /* R70 - ADC LR Rate */
+ 0x0000, /* R71 */
+ 0x0303, /* R72 - Input Control */
+ 0x0000, /* R73 - IN3 Input Control */
+ 0x0000, /* R74 - Mic Bias Control */
+ 0x0000, /* R75 */
+ 0x0000, /* R76 - Output Control */
+ 0x0000, /* R77 - Jack Detect */
+ 0x0000, /* R78 - Anti Pop Control */
+ 0x0000, /* R79 */
+ 0x0040, /* R80 - Left Input Volume */
+ 0x0040, /* R81 - Right Input Volume */
+ 0x0000, /* R82 */
+ 0x0000, /* R83 */
+ 0x0000, /* R84 */
+ 0x0000, /* R85 */
+ 0x0000, /* R86 */
+ 0x0000, /* R87 */
+ 0x0800, /* R88 - Left Mixer Control */
+ 0x1000, /* R89 - Right Mixer Control */
+ 0x0000, /* R90 */
+ 0x0000, /* R91 */
+ 0x0000, /* R92 - OUT3 Mixer Control */
+ 0x0000, /* R93 - OUT4 Mixer Control */
+ 0x0000, /* R94 */
+ 0x0000, /* R95 */
+ 0x0000, /* R96 - Output Left Mixer Volume */
+ 0x0000, /* R97 - Output Right Mixer Volume */
+ 0x0000, /* R98 - Input Mixer Volume L */
+ 0x0000, /* R99 - Input Mixer Volume R */
+ 0x0000, /* R100 - Input Mixer Volume */
+ 0x0000, /* R101 */
+ 0x0000, /* R102 */
+ 0x0000, /* R103 */
+ 0x00E4, /* R104 - LOUT1 Volume */
+ 0x00E4, /* R105 - ROUT1 Volume */
+ 0x00E4, /* R106 - LOUT2 Volume */
+ 0x02E4, /* R107 - ROUT2 Volume */
+ 0x0000, /* R108 */
+ 0x0000, /* R109 */
+ 0x0000, /* R110 */
+ 0x0000, /* R111 - BEEP Volume */
+ 0x0A00, /* R112 - AI Formating */
+ 0x0000, /* R113 - ADC DAC COMP */
+ 0x0020, /* R114 - AI ADC Control */
+ 0x0020, /* R115 - AI DAC Control */
+ 0x0000, /* R116 - AIF Test */
+ 0x0000, /* R117 */
+ 0x0000, /* R118 */
+ 0x0000, /* R119 */
+ 0x0000, /* R120 */
+ 0x0000, /* R121 */
+ 0x0000, /* R122 */
+ 0x0000, /* R123 */
+ 0x0000, /* R124 */
+ 0x0000, /* R125 */
+ 0x0000, /* R126 */
+ 0x0000, /* R127 */
+ 0x1FFF, /* R128 - GPIO Debounce */
+ 0x0000, /* R129 - GPIO Pin pull up Control */
+ 0x03FC, /* R130 - GPIO Pull down Control */
+ 0x0000, /* R131 - GPIO Interrupt Mode */
+ 0x0000, /* R132 */
+ 0x0000, /* R133 - GPIO Control */
+ 0x00FB, /* R134 - GPIO Configuration (i/o) */
+ 0x04FE, /* R135 - GPIO Pin Polarity / Type */
+ 0x0000, /* R136 */
+ 0x0000, /* R137 */
+ 0x0000, /* R138 */
+ 0x0000, /* R139 */
+ 0x0312, /* R140 - GPIO Function Select 1 */
+ 0x1003, /* R141 - GPIO Function Select 2 */
+ 0x1331, /* R142 - GPIO Function Select 3 */
+ 0x0003, /* R143 - GPIO Function Select 4 */
+ 0x0000, /* R144 - Digitiser Control (1) */
+ 0x0002, /* R145 - Digitiser Control (2) */
+ 0x0000, /* R146 */
+ 0x0000, /* R147 */
+ 0x0000, /* R148 */
+ 0x0000, /* R149 */
+ 0x0000, /* R150 */
+ 0x0000, /* R151 */
+ 0x7000, /* R152 - AUX1 Readback */
+ 0x7000, /* R153 - AUX2 Readback */
+ 0x7000, /* R154 - AUX3 Readback */
+ 0x7000, /* R155 - AUX4 Readback */
+ 0x0000, /* R156 - USB Voltage Readback */
+ 0x0000, /* R157 - LINE Voltage Readback */
+ 0x0000, /* R158 - BATT Voltage Readback */
+ 0x0000, /* R159 - Chip Temp Readback */
+ 0x0000, /* R160 */
+ 0x0000, /* R161 */
+ 0x0000, /* R162 */
+ 0x0000, /* R163 - Generic Comparator Control */
+ 0x0000, /* R164 - Generic comparator 1 */
+ 0x0000, /* R165 - Generic comparator 2 */
+ 0x0000, /* R166 - Generic comparator 3 */
+ 0x0000, /* R167 - Generic comparator 4 */
+ 0xA00F, /* R168 - Battery Charger Control 1 */
+ 0x0B06, /* R169 - Battery Charger Control 2 */
+ 0x0000, /* R170 - Battery Charger Control 3 */
+ 0x0000, /* R171 */
+ 0x0000, /* R172 - Current Sink Driver A */
+ 0x0000, /* R173 - CSA Flash control */
+ 0x0000, /* R174 - Current Sink Driver B */
+ 0x0000, /* R175 - CSB Flash control */
+ 0x0000, /* R176 - DCDC/LDO requested */
+ 0x002D, /* R177 - DCDC Active options */
+ 0x0000, /* R178 - DCDC Sleep options */
+ 0x0025, /* R179 - Power-check comparator */
+ 0x0062, /* R180 - DCDC1 Control */
+ 0x0400, /* R181 - DCDC1 Timeouts */
+ 0x1006, /* R182 - DCDC1 Low Power */
+ 0x0018, /* R183 - DCDC2 Control */
+ 0x0000, /* R184 - DCDC2 Timeouts */
+ 0x0000, /* R185 */
+ 0x0026, /* R186 - DCDC3 Control */
+ 0x0400, /* R187 - DCDC3 Timeouts */
+ 0x0006, /* R188 - DCDC3 Low Power */
+ 0x0062, /* R189 - DCDC4 Control */
+ 0x0400, /* R190 - DCDC4 Timeouts */
+ 0x0006, /* R191 - DCDC4 Low Power */
+ 0x0008, /* R192 - DCDC5 Control */
+ 0x0000, /* R193 - DCDC5 Timeouts */
+ 0x0000, /* R194 */
+ 0x0026, /* R195 - DCDC6 Control */
+ 0x0800, /* R196 - DCDC6 Timeouts */
+ 0x0006, /* R197 - DCDC6 Low Power */
+ 0x0000, /* R198 */
+ 0x0003, /* R199 - Limit Switch Control */
+ 0x0006, /* R200 - LDO1 Control */
+ 0x0400, /* R201 - LDO1 Timeouts */
+ 0x001C, /* R202 - LDO1 Low Power */
+ 0x0006, /* R203 - LDO2 Control */
+ 0x0400, /* R204 - LDO2 Timeouts */
+ 0x001C, /* R205 - LDO2 Low Power */
+ 0x001B, /* R206 - LDO3 Control */
+ 0x0000, /* R207 - LDO3 Timeouts */
+ 0x001C, /* R208 - LDO3 Low Power */
+ 0x001B, /* R209 - LDO4 Control */
+ 0x0000, /* R210 - LDO4 Timeouts */
+ 0x001C, /* R211 - LDO4 Low Power */
+ 0x0000, /* R212 */
+ 0x0000, /* R213 */
+ 0x0000, /* R214 */
+ 0x0000, /* R215 - VCC_FAULT Masks */
+ 0x001F, /* R216 - Main Bandgap Control */
+ 0x0000, /* R217 - OSC Control */
+ 0x9000, /* R218 - RTC Tick Control */
+ 0x0000, /* R219 */
+ 0x4000, /* R220 - RAM BIST 1 */
+ 0x0000, /* R221 */
+ 0x0000, /* R222 */
+ 0x0000, /* R223 */
+ 0x0000, /* R224 */
+ 0x0000, /* R225 - DCDC/LDO status */
+ 0x0000, /* R226 */
+ 0x0000, /* R227 */
+ 0x0000, /* R228 */
+ 0x0000, /* R229 */
+ 0xE000, /* R230 - GPIO Pin Status */
+ 0x0000, /* R231 */
+ 0x0000, /* R232 */
+ 0x0000, /* R233 */
+ 0x0000, /* R234 */
+ 0x0000, /* R235 */
+ 0x0000, /* R236 */
+ 0x0000, /* R237 */
+ 0x0000, /* R238 */
+ 0x0000, /* R239 */
+ 0x0000, /* R240 */
+ 0x0000, /* R241 */
+ 0x0000, /* R242 */
+ 0x0000, /* R243 */
+ 0x0000, /* R244 */
+ 0x0000, /* R245 */
+ 0x0000, /* R246 */
+ 0x0000, /* R247 */
+ 0x0000, /* R248 */
+ 0x0000, /* R249 */
+ 0x0000, /* R250 */
+ 0x0000, /* R251 */
+ 0x0000, /* R252 */
+ 0x0000, /* R253 */
+ 0x0000, /* R254 */
+ 0x0000, /* R255 */
+};
+#endif
+
+#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_2
+
+#undef WM8350_HAVE_CONFIG_MODE
+#define WM8350_HAVE_CONFIG_MODE
+
+const u16 wm8350_mode2_defaults[] = {
+ 0x17FF, /* R0 - Reset/ID */
+ 0x1000, /* R1 - ID */
+ 0x0000, /* R2 */
+ 0x1002, /* R3 - System Control 1 */
+ 0x0014, /* R4 - System Control 2 */
+ 0x0000, /* R5 - System Hibernate */
+ 0x8A00, /* R6 - Interface Control */
+ 0x0000, /* R7 */
+ 0x8000, /* R8 - Power mgmt (1) */
+ 0x0000, /* R9 - Power mgmt (2) */
+ 0x0000, /* R10 - Power mgmt (3) */
+ 0x2000, /* R11 - Power mgmt (4) */
+ 0x0E00, /* R12 - Power mgmt (5) */
+ 0x0000, /* R13 - Power mgmt (6) */
+ 0x0000, /* R14 - Power mgmt (7) */
+ 0x0000, /* R15 */
+ 0x0000, /* R16 - RTC Seconds/Minutes */
+ 0x0100, /* R17 - RTC Hours/Day */
+ 0x0101, /* R18 - RTC Date/Month */
+ 0x1400, /* R19 - RTC Year */
+ 0x0000, /* R20 - Alarm Seconds/Minutes */
+ 0x0000, /* R21 - Alarm Hours/Day */
+ 0x0000, /* R22 - Alarm Date/Month */
+ 0x0320, /* R23 - RTC Time Control */
+ 0x0000, /* R24 - System Interrupts */
+ 0x0000, /* R25 - Interrupt Status 1 */
+ 0x0000, /* R26 - Interrupt Status 2 */
+ 0x0000, /* R27 - Power Up Interrupt Status */
+ 0x0000, /* R28 - Under Voltage Interrupt status */
+ 0x0000, /* R29 - Over Current Interrupt status */
+ 0x0000, /* R30 - GPIO Interrupt Status */
+ 0x0000, /* R31 - Comparator Interrupt Status */
+ 0x3FFF, /* R32 - System Interrupts Mask */
+ 0x0000, /* R33 - Interrupt Status 1 Mask */
+ 0x0000, /* R34 - Interrupt Status 2 Mask */
+ 0x0000, /* R35 - Power Up Interrupt Status Mask */
+ 0x0000, /* R36 - Under Voltage Interrupt status Mask */
+ 0x0000, /* R37 - Over Current Interrupt status Mask */
+ 0x0000, /* R38 - GPIO Interrupt Status Mask */
+ 0x0000, /* R39 - Comparator Interrupt Status Mask */
+ 0x0040, /* R40 - Clock Control 1 */
+ 0x0000, /* R41 - Clock Control 2 */
+ 0x3B00, /* R42 - FLL Control 1 */
+ 0x7086, /* R43 - FLL Control 2 */
+ 0xC226, /* R44 - FLL Control 3 */
+ 0x0000, /* R45 - FLL Control 4 */
+ 0x0000, /* R46 */
+ 0x0000, /* R47 */
+ 0x0000, /* R48 - DAC Control */
+ 0x0000, /* R49 */
+ 0x00C0, /* R50 - DAC Digital Volume L */
+ 0x00C0, /* R51 - DAC Digital Volume R */
+ 0x0000, /* R52 */
+ 0x0040, /* R53 - DAC LR Rate */
+ 0x0000, /* R54 - DAC Clock Control */
+ 0x0000, /* R55 */
+ 0x0000, /* R56 */
+ 0x0000, /* R57 */
+ 0x4000, /* R58 - DAC Mute */
+ 0x0000, /* R59 - DAC Mute Volume */
+ 0x0000, /* R60 - DAC Side */
+ 0x0000, /* R61 */
+ 0x0000, /* R62 */
+ 0x0000, /* R63 */
+ 0x8000, /* R64 - ADC Control */
+ 0x0000, /* R65 */
+ 0x00C0, /* R66 - ADC Digital Volume L */
+ 0x00C0, /* R67 - ADC Digital Volume R */
+ 0x0000, /* R68 - ADC Divider */
+ 0x0000, /* R69 */
+ 0x0040, /* R70 - ADC LR Rate */
+ 0x0000, /* R71 */
+ 0x0303, /* R72 - Input Control */
+ 0x0000, /* R73 - IN3 Input Control */
+ 0x0000, /* R74 - Mic Bias Control */
+ 0x0000, /* R75 */
+ 0x0000, /* R76 - Output Control */
+ 0x0000, /* R77 - Jack Detect */
+ 0x0000, /* R78 - Anti Pop Control */
+ 0x0000, /* R79 */
+ 0x0040, /* R80 - Left Input Volume */
+ 0x0040, /* R81 - Right Input Volume */
+ 0x0000, /* R82 */
+ 0x0000, /* R83 */
+ 0x0000, /* R84 */
+ 0x0000, /* R85 */
+ 0x0000, /* R86 */
+ 0x0000, /* R87 */
+ 0x0800, /* R88 - Left Mixer Control */
+ 0x1000, /* R89 - Right Mixer Control */
+ 0x0000, /* R90 */
+ 0x0000, /* R91 */
+ 0x0000, /* R92 - OUT3 Mixer Control */
+ 0x0000, /* R93 - OUT4 Mixer Control */
+ 0x0000, /* R94 */
+ 0x0000, /* R95 */
+ 0x0000, /* R96 - Output Left Mixer Volume */
+ 0x0000, /* R97 - Output Right Mixer Volume */
+ 0x0000, /* R98 - Input Mixer Volume L */
+ 0x0000, /* R99 - Input Mixer Volume R */
+ 0x0000, /* R100 - Input Mixer Volume */
+ 0x0000, /* R101 */
+ 0x0000, /* R102 */
+ 0x0000, /* R103 */
+ 0x00E4, /* R104 - LOUT1 Volume */
+ 0x00E4, /* R105 - ROUT1 Volume */
+ 0x00E4, /* R106 - LOUT2 Volume */
+ 0x02E4, /* R107 - ROUT2 Volume */
+ 0x0000, /* R108 */
+ 0x0000, /* R109 */
+ 0x0000, /* R110 */
+ 0x0000, /* R111 - BEEP Volume */
+ 0x0A00, /* R112 - AI Formating */
+ 0x0000, /* R113 - ADC DAC COMP */
+ 0x0020, /* R114 - AI ADC Control */
+ 0x0020, /* R115 - AI DAC Control */
+ 0x0000, /* R116 - AIF Test */
+ 0x0000, /* R117 */
+ 0x0000, /* R118 */
+ 0x0000, /* R119 */
+ 0x0000, /* R120 */
+ 0x0000, /* R121 */
+ 0x0000, /* R122 */
+ 0x0000, /* R123 */
+ 0x0000, /* R124 */
+ 0x0000, /* R125 */
+ 0x0000, /* R126 */
+ 0x0000, /* R127 */
+ 0x1FFF, /* R128 - GPIO Debounce */
+ 0x0000, /* R129 - GPIO Pin pull up Control */
+ 0x03FC, /* R130 - GPIO Pull down Control */
+ 0x0000, /* R131 - GPIO Interrupt Mode */
+ 0x0000, /* R132 */
+ 0x0000, /* R133 - GPIO Control */
+ 0x08FB, /* R134 - GPIO Configuration (i/o) */
+ 0x0CFE, /* R135 - GPIO Pin Polarity / Type */
+ 0x0000, /* R136 */
+ 0x0000, /* R137 */
+ 0x0000, /* R138 */
+ 0x0000, /* R139 */
+ 0x0312, /* R140 - GPIO Function Select 1 */
+ 0x0003, /* R141 - GPIO Function Select 2 */
+ 0x2331, /* R142 - GPIO Function Select 3 */
+ 0x0003, /* R143 - GPIO Function Select 4 */
+ 0x0000, /* R144 - Digitiser Control (1) */
+ 0x0002, /* R145 - Digitiser Control (2) */
+ 0x0000, /* R146 */
+ 0x0000, /* R147 */
+ 0x0000, /* R148 */
+ 0x0000, /* R149 */
+ 0x0000, /* R150 */
+ 0x0000, /* R151 */
+ 0x7000, /* R152 - AUX1 Readback */
+ 0x7000, /* R153 - AUX2 Readback */
+ 0x7000, /* R154 - AUX3 Readback */
+ 0x7000, /* R155 - AUX4 Readback */
+ 0x0000, /* R156 - USB Voltage Readback */
+ 0x0000, /* R157 - LINE Voltage Readback */
+ 0x0000, /* R158 - BATT Voltage Readback */
+ 0x0000, /* R159 - Chip Temp Readback */
+ 0x0000, /* R160 */
+ 0x0000, /* R161 */
+ 0x0000, /* R162 */
+ 0x0000, /* R163 - Generic Comparator Control */
+ 0x0000, /* R164 - Generic comparator 1 */
+ 0x0000, /* R165 - Generic comparator 2 */
+ 0x0000, /* R166 - Generic comparator 3 */
+ 0x0000, /* R167 - Generic comparator 4 */
+ 0xA00F, /* R168 - Battery Charger Control 1 */
+ 0x0B06, /* R169 - Battery Charger Control 2 */
+ 0x0000, /* R170 - Battery Charger Control 3 */
+ 0x0000, /* R171 */
+ 0x0000, /* R172 - Current Sink Driver A */
+ 0x0000, /* R173 - CSA Flash control */
+ 0x0000, /* R174 - Current Sink Driver B */
+ 0x0000, /* R175 - CSB Flash control */
+ 0x0000, /* R176 - DCDC/LDO requested */
+ 0x002D, /* R177 - DCDC Active options */
+ 0x0000, /* R178 - DCDC Sleep options */
+ 0x0025, /* R179 - Power-check comparator */
+ 0x000E, /* R180 - DCDC1 Control */
+ 0x0400, /* R181 - DCDC1 Timeouts */
+ 0x1006, /* R182 - DCDC1 Low Power */
+ 0x0018, /* R183 - DCDC2 Control */
+ 0x0000, /* R184 - DCDC2 Timeouts */
+ 0x0000, /* R185 */
+ 0x002E, /* R186 - DCDC3 Control */
+ 0x0800, /* R187 - DCDC3 Timeouts */
+ 0x0006, /* R188 - DCDC3 Low Power */
+ 0x000E, /* R189 - DCDC4 Control */
+ 0x0800, /* R190 - DCDC4 Timeouts */
+ 0x0006, /* R191 - DCDC4 Low Power */
+ 0x0008, /* R192 - DCDC5 Control */
+ 0x0000, /* R193 - DCDC5 Timeouts */
+ 0x0000, /* R194 */
+ 0x0026, /* R195 - DCDC6 Control */
+ 0x0C00, /* R196 - DCDC6 Timeouts */
+ 0x0006, /* R197 - DCDC6 Low Power */
+ 0x0000, /* R198 */
+ 0x0003, /* R199 - Limit Switch Control */
+ 0x001A, /* R200 - LDO1 Control */
+ 0x0800, /* R201 - LDO1 Timeouts */
+ 0x001C, /* R202 - LDO1 Low Power */
+ 0x0010, /* R203 - LDO2 Control */
+ 0x0800, /* R204 - LDO2 Timeouts */
+ 0x001C, /* R205 - LDO2 Low Power */
+ 0x000A, /* R206 - LDO3 Control */
+ 0x0C00, /* R207 - LDO3 Timeouts */
+ 0x001C, /* R208 - LDO3 Low Power */
+ 0x001A, /* R209 - LDO4 Control */
+ 0x0800, /* R210 - LDO4 Timeouts */
+ 0x001C, /* R211 - LDO4 Low Power */
+ 0x0000, /* R212 */
+ 0x0000, /* R213 */
+ 0x0000, /* R214 */
+ 0x0000, /* R215 - VCC_FAULT Masks */
+ 0x001F, /* R216 - Main Bandgap Control */
+ 0x0000, /* R217 - OSC Control */
+ 0x9000, /* R218 - RTC Tick Control */
+ 0x0000, /* R219 */
+ 0x4000, /* R220 - RAM BIST 1 */
+ 0x0000, /* R221 */
+ 0x0000, /* R222 */
+ 0x0000, /* R223 */
+ 0x0000, /* R224 */
+ 0x0000, /* R225 - DCDC/LDO status */
+ 0x0000, /* R226 */
+ 0x0000, /* R227 */
+ 0x0000, /* R228 */
+ 0x0000, /* R229 */
+ 0xE000, /* R230 - GPIO Pin Status */
+ 0x0000, /* R231 */
+ 0x0000, /* R232 */
+ 0x0000, /* R233 */
+ 0x0000, /* R234 */
+ 0x0000, /* R235 */
+ 0x0000, /* R236 */
+ 0x0000, /* R237 */
+ 0x0000, /* R238 */
+ 0x0000, /* R239 */
+ 0x0000, /* R240 */
+ 0x0000, /* R241 */
+ 0x0000, /* R242 */
+ 0x0000, /* R243 */
+ 0x0000, /* R244 */
+ 0x0000, /* R245 */
+ 0x0000, /* R246 */
+ 0x0000, /* R247 */
+ 0x0000, /* R248 */
+ 0x0000, /* R249 */
+ 0x0000, /* R250 */
+ 0x0000, /* R251 */
+ 0x0000, /* R252 */
+ 0x0000, /* R253 */
+ 0x0000, /* R254 */
+ 0x0000, /* R255 */
+};
+#endif
+
+#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_3
+
+#undef WM8350_HAVE_CONFIG_MODE
+#define WM8350_HAVE_CONFIG_MODE
+
+const u16 wm8350_mode3_defaults[] = {
+ 0x17FF, /* R0 - Reset/ID */
+ 0x1000, /* R1 - ID */
+ 0x0000, /* R2 */
+ 0x1000, /* R3 - System Control 1 */
+ 0x0004, /* R4 - System Control 2 */
+ 0x0000, /* R5 - System Hibernate */
+ 0x8A00, /* R6 - Interface Control */
+ 0x0000, /* R7 */
+ 0x8000, /* R8 - Power mgmt (1) */
+ 0x0000, /* R9 - Power mgmt (2) */
+ 0x0000, /* R10 - Power mgmt (3) */
+ 0x2000, /* R11 - Power mgmt (4) */
+ 0x0E00, /* R12 - Power mgmt (5) */
+ 0x0000, /* R13 - Power mgmt (6) */
+ 0x0000, /* R14 - Power mgmt (7) */
+ 0x0000, /* R15 */
+ 0x0000, /* R16 - RTC Seconds/Minutes */
+ 0x0100, /* R17 - RTC Hours/Day */
+ 0x0101, /* R18 - RTC Date/Month */
+ 0x1400, /* R19 - RTC Year */
+ 0x0000, /* R20 - Alarm Seconds/Minutes */
+ 0x0000, /* R21 - Alarm Hours/Day */
+ 0x0000, /* R22 - Alarm Date/Month */
+ 0x0320, /* R23 - RTC Time Control */
+ 0x0000, /* R24 - System Interrupts */
+ 0x0000, /* R25 - Interrupt Status 1 */
+ 0x0000, /* R26 - Interrupt Status 2 */
+ 0x0000, /* R27 - Power Up Interrupt Status */
+ 0x0000, /* R28 - Under Voltage Interrupt status */
+ 0x0000, /* R29 - Over Current Interrupt status */
+ 0x0000, /* R30 - GPIO Interrupt Status */
+ 0x0000, /* R31 - Comparator Interrupt Status */
+ 0x3FFF, /* R32 - System Interrupts Mask */
+ 0x0000, /* R33 - Interrupt Status 1 Mask */
+ 0x0000, /* R34 - Interrupt Status 2 Mask */
+ 0x0000, /* R35 - Power Up Interrupt Status Mask */
+ 0x0000, /* R36 - Under Voltage Interrupt status Mask */
+ 0x0000, /* R37 - Over Current Interrupt status Mask */
+ 0x0000, /* R38 - GPIO Interrupt Status Mask */
+ 0x0000, /* R39 - Comparator Interrupt Status Mask */
+ 0x0040, /* R40 - Clock Control 1 */
+ 0x0000, /* R41 - Clock Control 2 */
+ 0x3B00, /* R42 - FLL Control 1 */
+ 0x7086, /* R43 - FLL Control 2 */
+ 0xC226, /* R44 - FLL Control 3 */
+ 0x0000, /* R45 - FLL Control 4 */
+ 0x0000, /* R46 */
+ 0x0000, /* R47 */
+ 0x0000, /* R48 - DAC Control */
+ 0x0000, /* R49 */
+ 0x00C0, /* R50 - DAC Digital Volume L */
+ 0x00C0, /* R51 - DAC Digital Volume R */
+ 0x0000, /* R52 */
+ 0x0040, /* R53 - DAC LR Rate */
+ 0x0000, /* R54 - DAC Clock Control */
+ 0x0000, /* R55 */
+ 0x0000, /* R56 */
+ 0x0000, /* R57 */
+ 0x4000, /* R58 - DAC Mute */
+ 0x0000, /* R59 - DAC Mute Volume */
+ 0x0000, /* R60 - DAC Side */
+ 0x0000, /* R61 */
+ 0x0000, /* R62 */
+ 0x0000, /* R63 */
+ 0x8000, /* R64 - ADC Control */
+ 0x0000, /* R65 */
+ 0x00C0, /* R66 - ADC Digital Volume L */
+ 0x00C0, /* R67 - ADC Digital Volume R */
+ 0x0000, /* R68 - ADC Divider */
+ 0x0000, /* R69 */
+ 0x0040, /* R70 - ADC LR Rate */
+ 0x0000, /* R71 */
+ 0x0303, /* R72 - Input Control */
+ 0x0000, /* R73 - IN3 Input Control */
+ 0x0000, /* R74 - Mic Bias Control */
+ 0x0000, /* R75 */
+ 0x0000, /* R76 - Output Control */
+ 0x0000, /* R77 - Jack Detect */
+ 0x0000, /* R78 - Anti Pop Control */
+ 0x0000, /* R79 */
+ 0x0040, /* R80 - Left Input Volume */
+ 0x0040, /* R81 - Right Input Volume */
+ 0x0000, /* R82 */
+ 0x0000, /* R83 */
+ 0x0000, /* R84 */
+ 0x0000, /* R85 */
+ 0x0000, /* R86 */
+ 0x0000, /* R87 */
+ 0x0800, /* R88 - Left Mixer Control */
+ 0x1000, /* R89 - Right Mixer Control */
+ 0x0000, /* R90 */
+ 0x0000, /* R91 */
+ 0x0000, /* R92 - OUT3 Mixer Control */
+ 0x0000, /* R93 - OUT4 Mixer Control */
+ 0x0000, /* R94 */
+ 0x0000, /* R95 */
+ 0x0000, /* R96 - Output Left Mixer Volume */
+ 0x0000, /* R97 - Output Right Mixer Volume */
+ 0x0000, /* R98 - Input Mixer Volume L */
+ 0x0000, /* R99 - Input Mixer Volume R */
+ 0x0000, /* R100 - Input Mixer Volume */
+ 0x0000, /* R101 */
+ 0x0000, /* R102 */
+ 0x0000, /* R103 */
+ 0x00E4, /* R104 - LOUT1 Volume */
+ 0x00E4, /* R105 - ROUT1 Volume */
+ 0x00E4, /* R106 - LOUT2 Volume */
+ 0x02E4, /* R107 - ROUT2 Volume */
+ 0x0000, /* R108 */
+ 0x0000, /* R109 */
+ 0x0000, /* R110 */
+ 0x0000, /* R111 - BEEP Volume */
+ 0x0A00, /* R112 - AI Formating */
+ 0x0000, /* R113 - ADC DAC COMP */
+ 0x0020, /* R114 - AI ADC Control */
+ 0x0020, /* R115 - AI DAC Control */
+ 0x0000, /* R116 - AIF Test */
+ 0x0000, /* R117 */
+ 0x0000, /* R118 */
+ 0x0000, /* R119 */
+ 0x0000, /* R120 */
+ 0x0000, /* R121 */
+ 0x0000, /* R122 */
+ 0x0000, /* R123 */
+ 0x0000, /* R124 */
+ 0x0000, /* R125 */
+ 0x0000, /* R126 */
+ 0x0000, /* R127 */
+ 0x1FFF, /* R128 - GPIO Debounce */
+ 0x0000, /* R129 - GPIO Pin pull up Control */
+ 0x03FC, /* R130 - GPIO Pull down Control */
+ 0x0000, /* R131 - GPIO Interrupt Mode */
+ 0x0000, /* R132 */
+ 0x0000, /* R133 - GPIO Control */
+ 0x0A7B, /* R134 - GPIO Configuration (i/o) */
+ 0x06FE, /* R135 - GPIO Pin Polarity / Type */
+ 0x0000, /* R136 */
+ 0x0000, /* R137 */
+ 0x0000, /* R138 */
+ 0x0000, /* R139 */
+ 0x1312, /* R140 - GPIO Function Select 1 */
+ 0x1030, /* R141 - GPIO Function Select 2 */
+ 0x2231, /* R142 - GPIO Function Select 3 */
+ 0x0003, /* R143 - GPIO Function Select 4 */
+ 0x0000, /* R144 - Digitiser Control (1) */
+ 0x0002, /* R145 - Digitiser Control (2) */
+ 0x0000, /* R146 */
+ 0x0000, /* R147 */
+ 0x0000, /* R148 */
+ 0x0000, /* R149 */
+ 0x0000, /* R150 */
+ 0x0000, /* R151 */
+ 0x7000, /* R152 - AUX1 Readback */
+ 0x7000, /* R153 - AUX2 Readback */
+ 0x7000, /* R154 - AUX3 Readback */
+ 0x7000, /* R155 - AUX4 Readback */
+ 0x0000, /* R156 - USB Voltage Readback */
+ 0x0000, /* R157 - LINE Voltage Readback */
+ 0x0000, /* R158 - BATT Voltage Readback */
+ 0x0000, /* R159 - Chip Temp Readback */
+ 0x0000, /* R160 */
+ 0x0000, /* R161 */
+ 0x0000, /* R162 */
+ 0x0000, /* R163 - Generic Comparator Control */
+ 0x0000, /* R164 - Generic comparator 1 */
+ 0x0000, /* R165 - Generic comparator 2 */
+ 0x0000, /* R166 - Generic comparator 3 */
+ 0x0000, /* R167 - Generic comparator 4 */
+ 0xA00F, /* R168 - Battery Charger Control 1 */
+ 0x0B06, /* R169 - Battery Charger Control 2 */
+ 0x0000, /* R170 - Battery Charger Control 3 */
+ 0x0000, /* R171 */
+ 0x0000, /* R172 - Current Sink Driver A */
+ 0x0000, /* R173 - CSA Flash control */
+ 0x0000, /* R174 - Current Sink Driver B */
+ 0x0000, /* R175 - CSB Flash control */
+ 0x0000, /* R176 - DCDC/LDO requested */
+ 0x002D, /* R177 - DCDC Active options */
+ 0x0000, /* R178 - DCDC Sleep options */
+ 0x0025, /* R179 - Power-check comparator */
+ 0x000E, /* R180 - DCDC1 Control */
+ 0x0400, /* R181 - DCDC1 Timeouts */
+ 0x1006, /* R182 - DCDC1 Low Power */
+ 0x0018, /* R183 - DCDC2 Control */
+ 0x0000, /* R184 - DCDC2 Timeouts */
+ 0x0000, /* R185 */
+ 0x000E, /* R186 - DCDC3 Control */
+ 0x0400, /* R187 - DCDC3 Timeouts */
+ 0x0006, /* R188 - DCDC3 Low Power */
+ 0x0026, /* R189 - DCDC4 Control */
+ 0x0400, /* R190 - DCDC4 Timeouts */
+ 0x0006, /* R191 - DCDC4 Low Power */
+ 0x0008, /* R192 - DCDC5 Control */
+ 0x0000, /* R193 - DCDC5 Timeouts */
+ 0x0000, /* R194 */
+ 0x0026, /* R195 - DCDC6 Control */
+ 0x0400, /* R196 - DCDC6 Timeouts */
+ 0x0006, /* R197 - DCDC6 Low Power */
+ 0x0000, /* R198 */
+ 0x0003, /* R199 - Limit Switch Control */
+ 0x001C, /* R200 - LDO1 Control */
+ 0x0000, /* R201 - LDO1 Timeouts */
+ 0x001C, /* R202 - LDO1 Low Power */
+ 0x001C, /* R203 - LDO2 Control */
+ 0x0400, /* R204 - LDO2 Timeouts */
+ 0x001C, /* R205 - LDO2 Low Power */
+ 0x001C, /* R206 - LDO3 Control */
+ 0x0400, /* R207 - LDO3 Timeouts */
+ 0x001C, /* R208 - LDO3 Low Power */
+ 0x001F, /* R209 - LDO4 Control */
+ 0x0400, /* R210 - LDO4 Timeouts */
+ 0x001C, /* R211 - LDO4 Low Power */
+ 0x0000, /* R212 */
+ 0x0000, /* R213 */
+ 0x0000, /* R214 */
+ 0x0000, /* R215 - VCC_FAULT Masks */
+ 0x001F, /* R216 - Main Bandgap Control */
+ 0x0000, /* R217 - OSC Control */
+ 0x9000, /* R218 - RTC Tick Control */
+ 0x0000, /* R219 */
+ 0x4000, /* R220 - RAM BIST 1 */
+ 0x0000, /* R221 */
+ 0x0000, /* R222 */
+ 0x0000, /* R223 */
+ 0x0000, /* R224 */
+ 0x0000, /* R225 - DCDC/LDO status */
+ 0x0000, /* R226 */
+ 0x0000, /* R227 */
+ 0x0000, /* R228 */
+ 0x0000, /* R229 */
+ 0xE000, /* R230 - GPIO Pin Status */
+ 0x0000, /* R231 */
+ 0x0000, /* R232 */
+ 0x0000, /* R233 */
+ 0x0000, /* R234 */
+ 0x0000, /* R235 */
+ 0x0000, /* R236 */
+ 0x0000, /* R237 */
+ 0x0000, /* R238 */
+ 0x0000, /* R239 */
+ 0x0000, /* R240 */
+ 0x0000, /* R241 */
+ 0x0000, /* R242 */
+ 0x0000, /* R243 */
+ 0x0000, /* R244 */
+ 0x0000, /* R245 */
+ 0x0000, /* R246 */
+ 0x0000, /* R247 */
+ 0x0000, /* R248 */
+ 0x0000, /* R249 */
+ 0x0000, /* R250 */
+ 0x0000, /* R251 */
+ 0x0000, /* R252 */
+ 0x0000, /* R253 */
+ 0x0000, /* R254 */
+ 0x0000, /* R255 */
+};
+#endif
+
+/* The register defaults for the config mode used must be compiled in but
+ * due to the impact on kernel size it is possible to disable
+ */
+#ifndef WM8350_HAVE_CONFIG_MODE
+#warning No WM8350 config modes supported - select at least one of the
+#warning MFD_WM8350_CONFIG_MODE_n options from the board driver.
+#endif
+
+/*
+ * Access masks.
+ */
+
+const struct wm8350_reg_access wm8350_reg_io_map[] = {
+ /* read write volatile */
+ { 0xFFFF, 0xFFFF, 0xFFFF }, /* R0 - Reset/ID */
+ { 0x7CFF, 0x0C00, 0x7FFF }, /* R1 - ID */
+ { 0x0000, 0x0000, 0x0000 }, /* R2 */
+ { 0xBE3B, 0xBE3B, 0x8000 }, /* R3 - System Control 1 */
+ { 0xFCF7, 0xFCF7, 0xF800 }, /* R4 - System Control 2 */
+ { 0x80FF, 0x80FF, 0x8000 }, /* R5 - System Hibernate */
+ { 0xFB0E, 0xFB0E, 0x0000 }, /* R6 - Interface Control */
+ { 0x0000, 0x0000, 0x0000 }, /* R7 */
+ { 0xE537, 0xE537, 0xFFFF }, /* R8 - Power mgmt (1) */
+ { 0x0FF3, 0x0FF3, 0xFFFF }, /* R9 - Power mgmt (2) */
+ { 0x008F, 0x008F, 0xFFFF }, /* R10 - Power mgmt (3) */
+ { 0x6D3C, 0x6D3C, 0xFFFF }, /* R11 - Power mgmt (4) */
+ { 0x1F8F, 0x1F8F, 0xFFFF }, /* R12 - Power mgmt (5) */
+ { 0x8F3F, 0x8F3F, 0xFFFF }, /* R13 - Power mgmt (6) */
+ { 0x0003, 0x0003, 0xFFFF }, /* R14 - Power mgmt (7) */
+ { 0x0000, 0x0000, 0x0000 }, /* R15 */
+ { 0x7F7F, 0x7F7F, 0xFFFF }, /* R16 - RTC Seconds/Minutes */
+ { 0x073F, 0x073F, 0xFFFF }, /* R17 - RTC Hours/Day */
+ { 0x1F3F, 0x1F3F, 0xFFFF }, /* R18 - RTC Date/Month */
+ { 0x3FFF, 0x00FF, 0xFFFF }, /* R19 - RTC Year */
+ { 0x7F7F, 0x7F7F, 0x0000 }, /* R20 - Alarm Seconds/Minutes */
+ { 0x0F3F, 0x0F3F, 0x0000 }, /* R21 - Alarm Hours/Day */
+ { 0x1F3F, 0x1F3F, 0x0000 }, /* R22 - Alarm Date/Month */
+ { 0xEF7F, 0xEA7F, 0xFFFF }, /* R23 - RTC Time Control */
+ { 0x3BFF, 0x0000, 0xFFFF }, /* R24 - System Interrupts */
+ { 0xFEE7, 0x0000, 0xFFFF }, /* R25 - Interrupt Status 1 */
+ { 0x35FF, 0x0000, 0xFFFF }, /* R26 - Interrupt Status 2 */
+ { 0x0F3F, 0x0000, 0xFFFF }, /* R27 - Power Up Interrupt Status */
+ { 0x0F3F, 0x0000, 0xFFFF }, /* R28 - Under Voltage Interrupt status */
+ { 0x8000, 0x0000, 0xFFFF }, /* R29 - Over Current Interrupt status */
+ { 0x1FFF, 0x0000, 0xFFFF }, /* R30 - GPIO Interrupt Status */
+ { 0xEF7F, 0x0000, 0xFFFF }, /* R31 - Comparator Interrupt Status */
+ { 0x3FFF, 0x3FFF, 0x0000 }, /* R32 - System Interrupts Mask */
+ { 0xFEE7, 0xFEE7, 0x0000 }, /* R33 - Interrupt Status 1 Mask */
+ { 0xF5FF, 0xF5FF, 0x0000 }, /* R34 - Interrupt Status 2 Mask */
+ { 0x0F3F, 0x0F3F, 0x0000 }, /* R35 - Power Up Interrupt Status Mask */
+ { 0x0F3F, 0x0F3F, 0x0000 }, /* R36 - Under Voltage Int status Mask */
+ { 0x8000, 0x8000, 0x0000 }, /* R37 - Over Current Int status Mask */
+ { 0x1FFF, 0x1FFF, 0x0000 }, /* R38 - GPIO Interrupt Status Mask */
+ { 0xEF7F, 0xEF7F, 0x0000 }, /* R39 - Comparator IntStatus Mask */
+ { 0xC9F7, 0xC9F7, 0xFFFF }, /* R40 - Clock Control 1 */
+ { 0x8001, 0x8001, 0x0000 }, /* R41 - Clock Control 2 */
+ { 0xFFF7, 0xFFF7, 0xFFFF }, /* R42 - FLL Control 1 */
+ { 0xFBFF, 0xFBFF, 0x0000 }, /* R43 - FLL Control 2 */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R44 - FLL Control 3 */
+ { 0x0033, 0x0033, 0x0000 }, /* R45 - FLL Control 4 */
+ { 0x0000, 0x0000, 0x0000 }, /* R46 */
+ { 0x0000, 0x0000, 0x0000 }, /* R47 */
+ { 0x3033, 0x3033, 0x0000 }, /* R48 - DAC Control */
+ { 0x0000, 0x0000, 0x0000 }, /* R49 */
+ { 0x81FF, 0x81FF, 0xFFFF }, /* R50 - DAC Digital Volume L */
+ { 0x81FF, 0x81FF, 0xFFFF }, /* R51 - DAC Digital Volume R */
+ { 0x0000, 0x0000, 0x0000 }, /* R52 */
+ { 0x0FFF, 0x0FFF, 0xFFFF }, /* R53 - DAC LR Rate */
+ { 0x0017, 0x0017, 0x0000 }, /* R54 - DAC Clock Control */
+ { 0x0000, 0x0000, 0x0000 }, /* R55 */
+ { 0x0000, 0x0000, 0x0000 }, /* R56 */
+ { 0x0000, 0x0000, 0x0000 }, /* R57 */
+ { 0x4000, 0x4000, 0x0000 }, /* R58 - DAC Mute */
+ { 0x7000, 0x7000, 0x0000 }, /* R59 - DAC Mute Volume */
+ { 0x3C00, 0x3C00, 0x0000 }, /* R60 - DAC Side */
+ { 0x0000, 0x0000, 0x0000 }, /* R61 */
+ { 0x0000, 0x0000, 0x0000 }, /* R62 */
+ { 0x0000, 0x0000, 0x0000 }, /* R63 */
+ { 0x8303, 0x8303, 0xFFFF }, /* R64 - ADC Control */
+ { 0x0000, 0x0000, 0x0000 }, /* R65 */
+ { 0x81FF, 0x81FF, 0xFFFF }, /* R66 - ADC Digital Volume L */
+ { 0x81FF, 0x81FF, 0xFFFF }, /* R67 - ADC Digital Volume R */
+ { 0x0FFF, 0x0FFF, 0x0000 }, /* R68 - ADC Divider */
+ { 0x0000, 0x0000, 0x0000 }, /* R69 */
+ { 0x0FFF, 0x0FFF, 0xFFFF }, /* R70 - ADC LR Rate */
+ { 0x0000, 0x0000, 0x0000 }, /* R71 */
+ { 0x0707, 0x0707, 0xFFFF }, /* R72 - Input Control */
+ { 0xC0C0, 0xC0C0, 0xFFFF }, /* R73 - IN3 Input Control */
+ { 0xC09F, 0xC09F, 0xFFFF }, /* R74 - Mic Bias Control */
+ { 0x0000, 0x0000, 0x0000 }, /* R75 */
+ { 0x0F15, 0x0F15, 0xFFFF }, /* R76 - Output Control */
+ { 0xC000, 0xC000, 0xFFFF }, /* R77 - Jack Detect */
+ { 0x03FF, 0x03FF, 0x0000 }, /* R78 - Anti Pop Control */
+ { 0x0000, 0x0000, 0x0000 }, /* R79 */
+ { 0xE1FC, 0xE1FC, 0x8000 }, /* R80 - Left Input Volume */
+ { 0xE1FC, 0xE1FC, 0x8000 }, /* R81 - Right Input Volume */
+ { 0x0000, 0x0000, 0x0000 }, /* R82 */
+ { 0x0000, 0x0000, 0x0000 }, /* R83 */
+ { 0x0000, 0x0000, 0x0000 }, /* R84 */
+ { 0x0000, 0x0000, 0x0000 }, /* R85 */
+ { 0x0000, 0x0000, 0x0000 }, /* R86 */
+ { 0x0000, 0x0000, 0x0000 }, /* R87 */
+ { 0x9807, 0x9807, 0xFFFF }, /* R88 - Left Mixer Control */
+ { 0x980B, 0x980B, 0xFFFF }, /* R89 - Right Mixer Control */
+ { 0x0000, 0x0000, 0x0000 }, /* R90 */
+ { 0x0000, 0x0000, 0x0000 }, /* R91 */
+ { 0x8909, 0x8909, 0xFFFF }, /* R92 - OUT3 Mixer Control */
+ { 0x9E07, 0x9E07, 0xFFFF }, /* R93 - OUT4 Mixer Control */
+ { 0x0000, 0x0000, 0x0000 }, /* R94 */
+ { 0x0000, 0x0000, 0x0000 }, /* R95 */
+ { 0x0EEE, 0x0EEE, 0x0000 }, /* R96 - Output Left Mixer Volume */
+ { 0xE0EE, 0xE0EE, 0x0000 }, /* R97 - Output Right Mixer Volume */
+ { 0x0E0F, 0x0E0F, 0x0000 }, /* R98 - Input Mixer Volume L */
+ { 0xE0E1, 0xE0E1, 0x0000 }, /* R99 - Input Mixer Volume R */
+ { 0x800E, 0x800E, 0x0000 }, /* R100 - Input Mixer Volume */
+ { 0x0000, 0x0000, 0x0000 }, /* R101 */
+ { 0x0000, 0x0000, 0x0000 }, /* R102 */
+ { 0x0000, 0x0000, 0x0000 }, /* R103 */
+ { 0xE1FC, 0xE1FC, 0xFFFF }, /* R104 - LOUT1 Volume */
+ { 0xE1FC, 0xE1FC, 0xFFFF }, /* R105 - ROUT1 Volume */
+ { 0xE1FC, 0xE1FC, 0xFFFF }, /* R106 - LOUT2 Volume */
+ { 0xE7FC, 0xE7FC, 0xFFFF }, /* R107 - ROUT2 Volume */
+ { 0x0000, 0x0000, 0x0000 }, /* R108 */
+ { 0x0000, 0x0000, 0x0000 }, /* R109 */
+ { 0x0000, 0x0000, 0x0000 }, /* R110 */
+ { 0x80E0, 0x80E0, 0xFFFF }, /* R111 - BEEP Volume */
+ { 0xBF00, 0xBF00, 0x0000 }, /* R112 - AI Formating */
+ { 0x00F1, 0x00F1, 0x0000 }, /* R113 - ADC DAC COMP */
+ { 0x00F8, 0x00F8, 0x0000 }, /* R114 - AI ADC Control */
+ { 0x40FB, 0x40FB, 0x0000 }, /* R115 - AI DAC Control */
+ { 0x7C30, 0x7C30, 0x0000 }, /* R116 - AIF Test */
+ { 0x0000, 0x0000, 0x0000 }, /* R117 */
+ { 0x0000, 0x0000, 0x0000 }, /* R118 */
+ { 0x0000, 0x0000, 0x0000 }, /* R119 */
+ { 0x0000, 0x0000, 0x0000 }, /* R120 */
+ { 0x0000, 0x0000, 0x0000 }, /* R121 */
+ { 0x0000, 0x0000, 0x0000 }, /* R122 */
+ { 0x0000, 0x0000, 0x0000 }, /* R123 */
+ { 0x0000, 0x0000, 0x0000 }, /* R124 */
+ { 0x0000, 0x0000, 0x0000 }, /* R125 */
+ { 0x0000, 0x0000, 0x0000 }, /* R126 */
+ { 0x0000, 0x0000, 0x0000 }, /* R127 */
+ { 0x1FFF, 0x1FFF, 0x0000 }, /* R128 - GPIO Debounce */
+ { 0x1FFF, 0x1FFF, 0x0000 }, /* R129 - GPIO Pin pull up Control */
+ { 0x1FFF, 0x1FFF, 0x0000 }, /* R130 - GPIO Pull down Control */
+ { 0x1FFF, 0x1FFF, 0x0000 }, /* R131 - GPIO Interrupt Mode */
+ { 0x0000, 0x0000, 0x0000 }, /* R132 */
+ { 0x00C0, 0x00C0, 0x0000 }, /* R133 - GPIO Control */
+ { 0x1FFF, 0x1FFF, 0x0000 }, /* R134 - GPIO Configuration (i/o) */
+ { 0x1FFF, 0x1FFF, 0x0000 }, /* R135 - GPIO Pin Polarity / Type */
+ { 0x0000, 0x0000, 0x0000 }, /* R136 */
+ { 0x0000, 0x0000, 0x0000 }, /* R137 */
+ { 0x0000, 0x0000, 0x0000 }, /* R138 */
+ { 0x0000, 0x0000, 0x0000 }, /* R139 */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R140 - GPIO Function Select 1 */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R141 - GPIO Function Select 2 */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R142 - GPIO Function Select 3 */
+ { 0x000F, 0x000F, 0x0000 }, /* R143 - GPIO Function Select 4 */
+ { 0xF0FF, 0xF0FF, 0xA000 }, /* R144 - Digitiser Control (1) */
+ { 0x3707, 0x3707, 0x0000 }, /* R145 - Digitiser Control (2) */
+ { 0x0000, 0x0000, 0x0000 }, /* R146 */
+ { 0x0000, 0x0000, 0x0000 }, /* R147 */
+ { 0x0000, 0x0000, 0x0000 }, /* R148 */
+ { 0x0000, 0x0000, 0x0000 }, /* R149 */
+ { 0x0000, 0x0000, 0x0000 }, /* R150 */
+ { 0x0000, 0x0000, 0x0000 }, /* R151 */
+ { 0x7FFF, 0x7000, 0xFFFF }, /* R152 - AUX1 Readback */
+ { 0x7FFF, 0x7000, 0xFFFF }, /* R153 - AUX2 Readback */
+ { 0x7FFF, 0x7000, 0xFFFF }, /* R154 - AUX3 Readback */
+ { 0x7FFF, 0x7000, 0xFFFF }, /* R155 - AUX4 Readback */
+ { 0x0FFF, 0x0000, 0xFFFF }, /* R156 - USB Voltage Readback */
+ { 0x0FFF, 0x0000, 0xFFFF }, /* R157 - LINE Voltage Readback */
+ { 0x0FFF, 0x0000, 0xFFFF }, /* R158 - BATT Voltage Readback */
+ { 0x0FFF, 0x0000, 0xFFFF }, /* R159 - Chip Temp Readback */
+ { 0x0000, 0x0000, 0x0000 }, /* R160 */
+ { 0x0000, 0x0000, 0x0000 }, /* R161 */
+ { 0x0000, 0x0000, 0x0000 }, /* R162 */
+ { 0x000F, 0x000F, 0x0000 }, /* R163 - Generic Comparator Control */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R164 - Generic comparator 1 */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R165 - Generic comparator 2 */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R166 - Generic comparator 3 */
+ { 0xFFFF, 0xFFFF, 0x0000 }, /* R167 - Generic comparator 4 */
+ { 0xBFFF, 0xBFFF, 0x8000 }, /* R168 - Battery Charger Control 1 */
+ { 0xFFFF, 0x4FFF, 0xB000 }, /* R169 - Battery Charger Control 2 */
+ { 0x007F, 0x007F, 0x0000 }, /* R170 - Battery Charger Control 3 */
+ { 0x0000, 0x0000, 0x0000 }, /* R171 */
+ { 0x903F, 0x903F, 0xFFFF }, /* R172 - Current Sink Driver A */
+ { 0xE333, 0xE333, 0xFFFF }, /* R173 - CSA Flash control */
+ { 0x903F, 0x903F, 0xFFFF }, /* R174 - Current Sink Driver B */
+ { 0xE333, 0xE333, 0xFFFF }, /* R175 - CSB Flash control */
+ { 0x8F3F, 0x8F3F, 0xFFFF }, /* R176 - DCDC/LDO requested */
+ { 0x332D, 0x332D, 0x0000 }, /* R177 - DCDC Active options */
+ { 0x002D, 0x002D, 0x0000 }, /* R178 - DCDC Sleep options */
+ { 0x5177, 0x5177, 0x8000 }, /* R179 - Power-check comparator */
+ { 0x047F, 0x047F, 0x0000 }, /* R180 - DCDC1 Control */
+ { 0xFFC0, 0xFFC0, 0x0000 }, /* R181 - DCDC1 Timeouts */
+ { 0x737F, 0x737F, 0x0000 }, /* R182 - DCDC1 Low Power */
+ { 0x535B, 0x535B, 0x0000 }, /* R183 - DCDC2 Control */
+ { 0xFFC0, 0xFFC0, 0x0000 }, /* R184 - DCDC2 Timeouts */
+ { 0x0000, 0x0000, 0x0000 }, /* R185 */
+ { 0x047F, 0x047F, 0x0000 }, /* R186 - DCDC3 Control */
+ { 0xFFC0, 0xFFC0, 0x0000 }, /* R187 - DCDC3 Timeouts */
+ { 0x737F, 0x737F, 0x0000 }, /* R188 - DCDC3 Low Power */
+ { 0x047F, 0x047F, 0x0000 }, /* R189 - DCDC4 Control */
+ { 0xFFC0, 0xFFC0, 0x0000 }, /* R190 - DCDC4 Timeouts */
+ { 0x737F, 0x737F, 0x0000 }, /* R191 - DCDC4 Low Power */
+ { 0x535B, 0x535B, 0x0000 }, /* R192 - DCDC5 Control */
+ { 0xFFC0, 0xFFC0, 0x0000 }, /* R193 - DCDC5 Timeouts */
+ { 0x0000, 0x0000, 0x0000 }, /* R194 */
+ { 0x047F, 0x047F, 0x0000 }, /* R195 - DCDC6 Control */
+ { 0xFFC0, 0xFFC0, 0x0000 }, /* R196 - DCDC6 Timeouts */
+ { 0x737F, 0x737F, 0x0000 }, /* R197 - DCDC6 Low Power */
+ { 0x0000, 0x0000, 0x0000 }, /* R198 */
+ { 0xFFD3, 0xFFD3, 0x0000 }, /* R199 - Limit Switch Control */
+ { 0x441F, 0x441F, 0x0000 }, /* R200 - LDO1 Control */
+ { 0xFFC0, 0xFFC0, 0x0000 }, /* R201 - LDO1 Timeouts */
+ { 0x331F, 0x331F, 0x0000 }, /* R202 - LDO1 Low Power */
+ { 0x441F, 0x441F, 0x0000 }, /* R203 - LDO2 Control */
+ { 0xFFC0, 0xFFC0, 0x0000 }, /* R204 - LDO2 Timeouts */
+ { 0x331F, 0x331F, 0x0000 }, /* R205 - LDO2 Low Power */
+ { 0x441F, 0x441F, 0x0000 }, /* R206 - LDO3 Control */
+ { 0xFFC0, 0xFFC0, 0x0000 }, /* R207 - LDO3 Timeouts */
+ { 0x331F, 0x331F, 0x0000 }, /* R208 - LDO3 Low Power */
+ { 0x441F, 0x441F, 0x0000 }, /* R209 - LDO4 Control */
+ { 0xFFC0, 0xFFC0, 0x0000 }, /* R210 - LDO4 Timeouts */
+ { 0x331F, 0x331F, 0x0000 }, /* R211 - LDO4 Low Power */
+ { 0x0000, 0x0000, 0x0000 }, /* R212 */
+ { 0x0000, 0x0000, 0x0000 }, /* R213 */
+ { 0x0000, 0x0000, 0x0000 }, /* R214 */
+ { 0x8F3F, 0x8F3F, 0x0000 }, /* R215 - VCC_FAULT Masks */
+ { 0xFF3F, 0xE03F, 0x0000 }, /* R216 - Main Bandgap Control */
+ { 0xEF2F, 0xE02F, 0x0000 }, /* R217 - OSC Control */
+ { 0xF3FF, 0xB3FF, 0xc000 }, /* R218 - RTC Tick Control */
+ { 0xFFFF, 0xFFFF, 0xFFFF }, /* R219 */
+ { 0x09FF, 0x01FF, 0x0000 }, /* R220 - RAM BIST 1 */
+ { 0x0000, 0x0000, 0x0000 }, /* R221 */
+ { 0xFFFF, 0xFFFF, 0xFFFF }, /* R222 */
+ { 0xFFFF, 0xFFFF, 0xFFFF }, /* R223 */
+ { 0x0000, 0x0000, 0x0000 }, /* R224 */
+ { 0x8F3F, 0x0000, 0xFFFF }, /* R225 - DCDC/LDO status */
+ { 0x0000, 0x0000, 0x0000 }, /* R226 */
+ { 0x0000, 0x0000, 0xFFFF }, /* R227 */
+ { 0x0000, 0x0000, 0x0000 }, /* R228 */
+ { 0x0000, 0x0000, 0x0000 }, /* R229 */
+ { 0xFFFF, 0x1FFF, 0xFFFF }, /* R230 - GPIO Pin Status */
+ { 0xFFFF, 0x1FFF, 0xFFFF }, /* R231 */
+ { 0xFFFF, 0x1FFF, 0xFFFF }, /* R232 */
+ { 0xFFFF, 0x1FFF, 0xFFFF }, /* R233 */
+ { 0x0000, 0x0000, 0x0000 }, /* R234 */
+ { 0x0000, 0x0000, 0x0000 }, /* R235 */
+ { 0x0000, 0x0000, 0x0000 }, /* R236 */
+ { 0x0000, 0x0000, 0x0000 }, /* R237 */
+ { 0x0000, 0x0000, 0x0000 }, /* R238 */
+ { 0x0000, 0x0000, 0x0000 }, /* R239 */
+ { 0x0000, 0x0000, 0x0000 }, /* R240 */
+ { 0x0000, 0x0000, 0x0000 }, /* R241 */
+ { 0x0000, 0x0000, 0x0000 }, /* R242 */
+ { 0x0000, 0x0000, 0x0000 }, /* R243 */
+ { 0x0000, 0x0000, 0x0000 }, /* R244 */
+ { 0x0000, 0x0000, 0x0000 }, /* R245 */
+ { 0x0000, 0x0000, 0x0000 }, /* R246 */
+ { 0x0000, 0x0000, 0x0000 }, /* R247 */
+ { 0xFFFF, 0x0010, 0xFFFF }, /* R248 */
+ { 0x0000, 0x0000, 0x0000 }, /* R249 */
+ { 0xFFFF, 0x0010, 0xFFFF }, /* R250 */
+ { 0xFFFF, 0x0010, 0xFFFF }, /* R251 */
+ { 0x0000, 0x0000, 0x0000 }, /* R252 */
+ { 0xFFFF, 0x0010, 0xFFFF }, /* R253 */
+ { 0x0000, 0x0000, 0x0000 }, /* R254 */
+ { 0x0000, 0x0000, 0x0000 }, /* R255 */
+};
