MIPS: Move GIC to drivers/irqchip/
Move GIC irqchip support to drivers/irqchip/ and rename the Kconfig
option from IRQ_GIC to MIPS_GIC to avoid confusion with the ARM GIC.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Reviewed-by: Qais Yousef <qais.yousef@imgtec.com>
Tested-by: Qais Yousef <qais.yousef@imgtec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeffrey Deans <jeffrey.deans@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Jonas Gorski <jogo@openwrt.org>
Cc: John Crispin <blogic@openwrt.org>
Cc: David Daney <ddaney.cavm@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/7812/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index e08aeec7..e0b7c200 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -320,7 +320,7 @@
select GENERIC_ISA_DMA
select HAVE_PCSPKR_PLATFORM
select IRQ_CPU
- select IRQ_GIC
+ select MIPS_GIC
select HW_HAS_PCI
select I8253
select I8259
@@ -362,7 +362,7 @@
select CPU_MIPSR2_IRQ_EI
select DMA_NONCOHERENT
select IRQ_CPU
- select IRQ_GIC
+ select MIPS_GIC
select LIBFDT
select MIPS_MSC
select SYS_HAS_CPU_MIPS32_R1
@@ -1073,10 +1073,6 @@
config IRQ_GT641XX
bool
-config IRQ_GIC
- select MIPS_CM
- bool
-
config PCI_GT64XXX_PCI0
bool
@@ -1890,7 +1886,7 @@
config CEVT_GIC
bool "Use GIC global counter for clock events"
- depends on IRQ_GIC && !MIPS_SEAD3
+ depends on MIPS_GIC && !MIPS_SEAD3
help
Use the GIC global counter for the clock events. The R4K clock
event driver is always present, so if the platform ends up not
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 008a2fe..3982e51 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -68,7 +68,6 @@
obj-$(CONFIG_MIPS_MSC) += irq-msc01.o
obj-$(CONFIG_IRQ_TXX9) += irq_txx9.o
obj-$(CONFIG_IRQ_GT641XX) += irq-gt641xx.o
-obj-$(CONFIG_IRQ_GIC) += irq-gic.o
obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_32BIT) += scall32-o32.o
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index bc127e2..5b8f8e3 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -85,7 +85,7 @@
*/
static int c0_compare_int_pending(void)
{
-#ifdef CONFIG_IRQ_GIC
+#ifdef CONFIG_MIPS_GIC
if (cpu_has_veic)
return gic_get_timer_pending();
#endif
diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c
index 21f23ad..d60475f 100644
--- a/arch/mips/kernel/smp-mt.c
+++ b/arch/mips/kernel/smp-mt.c
@@ -119,7 +119,7 @@
unsigned long flags;
int vpflags;
-#ifdef CONFIG_IRQ_GIC
+#ifdef CONFIG_MIPS_GIC
if (gic_present) {
gic_send_ipi_single(cpu, action);
return;
@@ -158,7 +158,7 @@
static void vsmp_init_secondary(void)
{
-#ifdef CONFIG_IRQ_GIC
+#ifdef CONFIG_MIPS_GIC
/* This is Malta specific: IPI,performance and timer interrupts */
if (gic_present)
change_c0_status(ST0_IM, STATUSF_IP3 | STATUSF_IP4 |
diff --git a/arch/mips/mti-malta/malta-time.c b/arch/mips/mti-malta/malta-time.c
index a4e035c..17cfc8a 100644
--- a/arch/mips/mti-malta/malta-time.c
+++ b/arch/mips/mti-malta/malta-time.c
@@ -70,7 +70,7 @@
{
unsigned long flags;
unsigned int count, start;
-#ifdef CONFIG_IRQ_GIC
+#ifdef CONFIG_MIPS_GIC
unsigned int giccount = 0, gicstart = 0;
#endif
@@ -87,7 +87,7 @@
/* Initialize counters. */
start = read_c0_count();
-#ifdef CONFIG_IRQ_GIC
+#ifdef CONFIG_MIPS_GIC
if (gic_present)
GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_31_00), gicstart);
#endif
@@ -97,7 +97,7 @@
while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
count = read_c0_count();
-#ifdef CONFIG_IRQ_GIC
+#ifdef CONFIG_MIPS_GIC
if (gic_present)
GICREAD(GIC_REG(SHARED, GIC_SH_COUNTER_31_00), giccount);
#endif
@@ -107,7 +107,7 @@
count -= start;
mips_hpt_frequency = count;
-#ifdef CONFIG_IRQ_GIC
+#ifdef CONFIG_MIPS_GIC
if (gic_present) {
giccount -= gicstart;
gic_frequency = giccount;
@@ -189,7 +189,7 @@
setup_pit_timer();
#endif
-#ifdef CONFIG_IRQ_GIC
+#ifdef CONFIG_MIPS_GIC
if (gic_present) {
freq = freqround(gic_frequency, 5000);
printk("GIC frequency %d.%02d MHz\n", freq/1000000,
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index b21f12f..f2dde14 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -125,3 +125,7 @@
help
Support for Texas Instruments Keystone 2 IRQ controller IP which
is part of the Keystone 2 IPC mechanism
+
+config MIPS_GIC
+ bool
+ select MIPS_CM
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 173bb5f..0218330 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -38,3 +38,4 @@
obj-$(CONFIG_BRCMSTB_L2_IRQ) += irq-brcmstb-l2.o \
irq-bcm7120-l2.o
obj-$(CONFIG_KEYSTONE_IRQ) += irq-keystone.o
+obj-$(CONFIG_MIPS_GIC) += irq-mips-gic.o
diff --git a/arch/mips/kernel/irq-gic.c b/drivers/irqchip/irq-mips-gic.c
similarity index 100%
rename from arch/mips/kernel/irq-gic.c
rename to drivers/irqchip/irq-mips-gic.c
