// SPDX-License-Identifier: GPL-2.0
/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */

#include "msm8998.dtsi"
#include "pm8998.dtsi"
#include "pmi8998.dtsi"
#include "pm8005.dtsi"

/ {
	aliases {
		serial0 = &blsp2_uart1;
		serial1 = &blsp1_uart3;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	vph_pwr: vph-pwr-regulator {
		compatible = "regulator-fixed";
		regulator-name = "vph_pwr";
		regulator-always-on;
		regulator-boot-on;
	};
};

&blsp1_uart3 {
	status = "okay";

	bluetooth {
		compatible = "qcom,wcn3990-bt";

		vddio-supply = <&vreg_s4a_1p8>;
		vddxo-supply = <&vreg_l7a_1p8>;
		vddrf-supply = <&vreg_l17a_1p3>;
		vddch0-supply = <&vreg_l25a_3p3>;
		max-speed = <3200000>;
	};
};

&blsp2_uart1 {
	status = "okay";
};

&etf {
	status = "okay";
};

&etm1 {
	status = "okay";
};

&etm2 {
	status = "okay";
};

&etm3 {
	status = "okay";
};

&etm4 {
	status = "okay";
};

&etm5 {
	status = "okay";
};

&etm6 {
	status = "okay";
};

&etm7 {
	status = "okay";
};

&etm8 {
	status = "okay";
};

&etr {
	status = "okay";
};

&funnel1 {
	status = "okay";
};

&funnel2 {
	status = "okay";
};

&funnel3 {
	status = "okay";
};

&funnel4 {
	// FIXME: Figure out why clock late_initcall crashes the board with
	// this enabled.
	// status = "okay";
};

&funnel5 {
	// FIXME: Figure out why clock late_initcall crashes the board with
	// this enabled.
	// status = "okay";
};

&pm8005_lsid1 {
	pm8005-regulators {
		compatible = "qcom,pm8005-regulators";

		vdd_s1-supply = <&vph_pwr>;

		pm8005_s1: s1 { /* VDD_GFX supply */
			regulator-min-microvolt = <524000>;
			regulator-max-microvolt = <1100000>;
			regulator-enable-ramp-delay = <500>;

			/* hack until we rig up the gpu consumer */
			regulator-always-on;
		};
	};
};

&qusb2phy {
	status = "okay";

	vdda-pll-supply = <&vreg_l12a_1p8>;
	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
};

&replicator1 {
	status = "okay";
};

&rpm_requests {
	pm8998-regulators {
		compatible = "qcom,rpm-pm8998-regulators";

		vdd_s1-supply = <&vph_pwr>;
		vdd_s2-supply = <&vph_pwr>;
		vdd_s3-supply = <&vph_pwr>;
		vdd_s4-supply = <&vph_pwr>;
		vdd_s5-supply = <&vph_pwr>;
		vdd_s6-supply = <&vph_pwr>;
		vdd_s7-supply = <&vph_pwr>;
		vdd_s8-supply = <&vph_pwr>;
		vdd_s9-supply = <&vph_pwr>;
		vdd_s10-supply = <&vph_pwr>;
		vdd_s11-supply = <&vph_pwr>;
		vdd_s12-supply = <&vph_pwr>;
		vdd_s13-supply = <&vph_pwr>;
		vdd_l1_l27-supply = <&vreg_s7a_1p025>;
		vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
		vdd_l3_l11-supply = <&vreg_s7a_1p025>;
		vdd_l4_l5-supply = <&vreg_s7a_1p025>;
		vdd_l6-supply = <&vreg_s5a_2p04>;
		vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
		vdd_l9-supply = <&vreg_bob>;
		vdd_l10_l23_l25-supply = <&vreg_bob>;
		vdd_l13_l19_l21-supply = <&vreg_bob>;
		vdd_l16_l28-supply = <&vreg_bob>;
		vdd_l18_l22-supply = <&vreg_bob>;
		vdd_l20_l24-supply = <&vreg_bob>;
		vdd_l26-supply = <&vreg_s3a_1p35>;
		vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;

		vreg_s3a_1p35: s3 {
			regulator-min-microvolt = <1352000>;
			regulator-max-microvolt = <1352000>;
		};
		vreg_s4a_1p8: s4 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-allow-set-load;
		};
		vreg_s5a_2p04: s5 {
			regulator-min-microvolt = <1904000>;
			regulator-max-microvolt = <2040000>;
		};
		vreg_s7a_1p025: s7 {
			regulator-min-microvolt = <900000>;
			regulator-max-microvolt = <1028000>;
		};
		vreg_l1a_0p875: l1 {
			regulator-min-microvolt = <880000>;
			regulator-max-microvolt = <880000>;
		};
		vreg_l2a_1p2: l2 {
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
		};
		vreg_l3a_1p0: l3 {
			regulator-min-microvolt = <1000000>;
			regulator-max-microvolt = <1000000>;
		};
		vreg_l5a_0p8: l5 {
			regulator-min-microvolt = <800000>;
			regulator-max-microvolt = <800000>;
		};
		vreg_l6a_1p8: l6 {
			regulator-min-microvolt = <1808000>;
			regulator-max-microvolt = <1808000>;
		};
		vreg_l7a_1p8: l7 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
		};
		vreg_l8a_1p2: l8 {
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
		};
		vreg_l9a_1p8: l9 {
			regulator-min-microvolt = <1808000>;
			regulator-max-microvolt = <2960000>;
		};
		vreg_l10a_1p8: l10 {
			regulator-min-microvolt = <1808000>;
			regulator-max-microvolt = <2960000>;
		};
		vreg_l11a_1p0: l11 {
			regulator-min-microvolt = <1000000>;
			regulator-max-microvolt = <1000000>;
		};
		vreg_l12a_1p8: l12 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
		};
		vreg_l13a_2p95: l13 {
			regulator-min-microvolt = <1808000>;
			regulator-max-microvolt = <2960000>;
		};
		vreg_l14a_1p88: l14 {
			regulator-min-microvolt = <1880000>;
			regulator-max-microvolt = <1880000>;
		};
		vreg_15a_1p8: l15 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
		};
		vreg_l16a_2p7: l16 {
			regulator-min-microvolt = <2704000>;
			regulator-max-microvolt = <2704000>;
		};
		vreg_l17a_1p3: l17 {
			regulator-min-microvolt = <1304000>;
			regulator-max-microvolt = <1304000>;
		};
		vreg_l18a_2p7: l18 {
			regulator-min-microvolt = <2704000>;
			regulator-max-microvolt = <2704000>;
		};
		vreg_l19a_3p0: l19 {
			regulator-min-microvolt = <3008000>;
			regulator-max-microvolt = <3008000>;
		};
		vreg_l20a_2p95: l20 {
			regulator-min-microvolt = <2960000>;
			regulator-max-microvolt = <2960000>;
			regulator-allow-set-load;
		};
		vreg_l21a_2p95: l21 {
			regulator-min-microvolt = <2960000>;
			regulator-max-microvolt = <2960000>;
			regulator-allow-set-load;
			regulator-system-load = <800000>;
		};
		vreg_l22a_2p85: l22 {
			regulator-min-microvolt = <2864000>;
			regulator-max-microvolt = <2864000>;
		};
		vreg_l23a_3p3: l23 {
			regulator-min-microvolt = <3312000>;
			regulator-max-microvolt = <3312000>;
		};
		vreg_l24a_3p075: l24 {
			regulator-min-microvolt = <3088000>;
			regulator-max-microvolt = <3088000>;
		};
		vreg_l25a_3p3: l25 {
			regulator-min-microvolt = <3104000>;
			regulator-max-microvolt = <3312000>;
		};
		vreg_l26a_1p2: l26 {
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
			regulator-allow-set-load;
		};
		vreg_l28_3p0: l28 {
			regulator-min-microvolt = <3008000>;
			regulator-max-microvolt = <3008000>;
		};

		vreg_lvs1a_1p8: lvs1 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
		};

		vreg_lvs2a_1p8: lvs2 {
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
		};

	};

	pmi8998-regulators {
		compatible = "qcom,rpm-pmi8998-regulators";

		vdd_bob-supply = <&vph_pwr>;

		vreg_bob: bob {
			regulator-min-microvolt = <3312000>;
			regulator-max-microvolt = <3600000>;
		};
	};
};

&remoteproc_adsp {
	status = "okay";
};

&remoteproc_slpi {
	status = "okay";
};

&tlmm {
	gpio-reserved-ranges = <0 4>, <81 4>;
};

&sdhc2 {
	status = "okay";
	cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>;

	vmmc-supply = <&vreg_l21a_2p95>;
	vqmmc-supply = <&vreg_l13a_2p95>;

	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&sdc2_clk_on  &sdc2_cmd_on  &sdc2_data_on  &sdc2_cd_on>;
	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
};

&stm {
	status = "okay";
};

&ufshc {
	vcc-supply = <&vreg_l20a_2p95>;
	vccq-supply = <&vreg_l26a_1p2>;
	vccq2-supply = <&vreg_s4a_1p8>;
	vcc-max-microamp = <750000>;
	vccq-max-microamp = <560000>;
	vccq2-max-microamp = <750000>;
};

&ufsphy {
	vdda-phy-supply = <&vreg_l1a_0p875>;
	vdda-pll-supply = <&vreg_l2a_1p2>;
	vddp-ref-clk-supply = <&vreg_l26a_1p2>;
	vdda-phy-max-microamp = <51400>;
	vdda-pll-max-microamp = <14600>;
	vddp-ref-clk-max-microamp = <100>;
	vddp-ref-clk-always-on;
};

&usb3 {
	status = "okay";
};

&usb3_dwc3 {
	dr_mode = "host"; /* Force to host until we have Type-C hooked up */
};

&usb3phy {
	status = "okay";

	vdda-phy-supply = <&vreg_l1a_0p875>;
	vdda-pll-supply = <&vreg_l2a_1p2>;
};

&wifi {
	status = "okay";

	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
};

/* PINCTRL - board-specific pinctrl */
&blsp1_uart3_on {
	rx {
		/delete-property/ bias-disable;
		/*
		 * Configure a pull-up on 45 (RX). This is needed to
		 * avoid garbage data when the TX pin of the Bluetooth
		 * module is in tri-state (module powered off or not
		 * driving the signal yet).
		 */
		bias-pull-up;
	};

	cts {
		/delete-property/ bias-disable;
		/*
		 * Configure a pull-down on 47 (CTS) to match the pull
		 * of the Bluetooth module.
		 */
		bias-pull-down;
	};
};