| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Driver for STMicroelectronics Multi-Function eXpander (STMFX) core |
| * |
| * Copyright (C) 2019 STMicroelectronics |
| * Author(s): Amelie Delaunay <amelie.delaunay@st.com>. |
| */ |
| #include <linux/bitfield.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/mfd/core.h> |
| #include <linux/mfd/stmfx.h> |
| #include <linux/module.h> |
| #include <linux/regulator/consumer.h> |
| |
| static bool stmfx_reg_volatile(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case STMFX_REG_SYS_CTRL: |
| case STMFX_REG_IRQ_SRC_EN: |
| case STMFX_REG_IRQ_PENDING: |
| case STMFX_REG_IRQ_GPI_PENDING1: |
| case STMFX_REG_IRQ_GPI_PENDING2: |
| case STMFX_REG_IRQ_GPI_PENDING3: |
| case STMFX_REG_GPIO_STATE1: |
| case STMFX_REG_GPIO_STATE2: |
| case STMFX_REG_GPIO_STATE3: |
| case STMFX_REG_IRQ_GPI_SRC1: |
| case STMFX_REG_IRQ_GPI_SRC2: |
| case STMFX_REG_IRQ_GPI_SRC3: |
| case STMFX_REG_GPO_SET1: |
| case STMFX_REG_GPO_SET2: |
| case STMFX_REG_GPO_SET3: |
| case STMFX_REG_GPO_CLR1: |
| case STMFX_REG_GPO_CLR2: |
| case STMFX_REG_GPO_CLR3: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool stmfx_reg_writeable(struct device *dev, unsigned int reg) |
| { |
| return (reg >= STMFX_REG_SYS_CTRL); |
| } |
| |
| static const struct regmap_config stmfx_regmap_config = { |
| .reg_bits = 8, |
| .reg_stride = 1, |
| .val_bits = 8, |
| .max_register = STMFX_REG_MAX, |
| .volatile_reg = stmfx_reg_volatile, |
| .writeable_reg = stmfx_reg_writeable, |
| .cache_type = REGCACHE_RBTREE, |
| }; |
| |
| static const struct resource stmfx_pinctrl_resources[] = { |
| DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_GPIO), |
| }; |
| |
| static const struct resource stmfx_idd_resources[] = { |
| DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_IDD), |
| DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_ERROR), |
| }; |
| |
| static const struct resource stmfx_ts_resources[] = { |
| DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_DET), |
| DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_NE), |
| DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_TH), |
| DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_FULL), |
| DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_OVF), |
| }; |
| |
| static struct mfd_cell stmfx_cells[] = { |
| { |
| .of_compatible = "st,stmfx-0300-pinctrl", |
| .name = "stmfx-pinctrl", |
| .resources = stmfx_pinctrl_resources, |
| .num_resources = ARRAY_SIZE(stmfx_pinctrl_resources), |
| }, |
| { |
| .of_compatible = "st,stmfx-0300-idd", |
| .name = "stmfx-idd", |
| .resources = stmfx_idd_resources, |
| .num_resources = ARRAY_SIZE(stmfx_idd_resources), |
| }, |
| { |
| .of_compatible = "st,stmfx-0300-ts", |
| .name = "stmfx-ts", |
| .resources = stmfx_ts_resources, |
| .num_resources = ARRAY_SIZE(stmfx_ts_resources), |
| }, |
| }; |
| |
| static u8 stmfx_func_to_mask(u32 func) |
| { |
| u8 mask = 0; |
| |
| if (func & STMFX_FUNC_GPIO) |
| mask |= STMFX_REG_SYS_CTRL_GPIO_EN; |
| |
| if ((func & STMFX_FUNC_ALTGPIO_LOW) || (func & STMFX_FUNC_ALTGPIO_HIGH)) |
| mask |= STMFX_REG_SYS_CTRL_ALTGPIO_EN; |
| |
| if (func & STMFX_FUNC_TS) |
| mask |= STMFX_REG_SYS_CTRL_TS_EN; |
| |
| if (func & STMFX_FUNC_IDD) |
| mask |= STMFX_REG_SYS_CTRL_IDD_EN; |
| |
| return mask; |
| } |
| |
| int stmfx_function_enable(struct stmfx *stmfx, u32 func) |
| { |
| u32 sys_ctrl; |
| u8 mask; |
| int ret; |
| |
| ret = regmap_read(stmfx->map, STMFX_REG_SYS_CTRL, &sys_ctrl); |
| if (ret) |
| return ret; |
| |
| /* |
| * IDD and TS have priority in STMFX FW, so if IDD and TS are enabled, |
| * ALTGPIO function is disabled by STMFX FW. If IDD or TS is enabled, |
| * the number of aGPIO available decreases. To avoid GPIO management |
| * disturbance, abort IDD or TS function enable in this case. |
| */ |
| if (((func & STMFX_FUNC_IDD) || (func & STMFX_FUNC_TS)) && |
| (sys_ctrl & STMFX_REG_SYS_CTRL_ALTGPIO_EN)) { |
| dev_err(stmfx->dev, "ALTGPIO function already enabled\n"); |
| return -EBUSY; |
| } |
| |
| /* If TS is enabled, aGPIO[3:0] cannot be used */ |
| if ((func & STMFX_FUNC_ALTGPIO_LOW) && |
| (sys_ctrl & STMFX_REG_SYS_CTRL_TS_EN)) { |
| dev_err(stmfx->dev, "TS in use, aGPIO[3:0] unavailable\n"); |
| return -EBUSY; |
| } |
| |
| /* If IDD is enabled, aGPIO[7:4] cannot be used */ |
| if ((func & STMFX_FUNC_ALTGPIO_HIGH) && |
| (sys_ctrl & STMFX_REG_SYS_CTRL_IDD_EN)) { |
| dev_err(stmfx->dev, "IDD in use, aGPIO[7:4] unavailable\n"); |
| return -EBUSY; |
| } |
| |
| mask = stmfx_func_to_mask(func); |
| |
| return regmap_update_bits(stmfx->map, STMFX_REG_SYS_CTRL, mask, mask); |
| } |
| EXPORT_SYMBOL_GPL(stmfx_function_enable); |
| |
| int stmfx_function_disable(struct stmfx *stmfx, u32 func) |
| { |
| u8 mask = stmfx_func_to_mask(func); |
| |
| return regmap_update_bits(stmfx->map, STMFX_REG_SYS_CTRL, mask, 0); |
| } |
| EXPORT_SYMBOL_GPL(stmfx_function_disable); |
| |
| static void stmfx_irq_bus_lock(struct irq_data *data) |
| { |
| struct stmfx *stmfx = irq_data_get_irq_chip_data(data); |
| |
| mutex_lock(&stmfx->lock); |
| } |
| |
| static void stmfx_irq_bus_sync_unlock(struct irq_data *data) |
| { |
| struct stmfx *stmfx = irq_data_get_irq_chip_data(data); |
| |
| regmap_write(stmfx->map, STMFX_REG_IRQ_SRC_EN, stmfx->irq_src); |
| |
| mutex_unlock(&stmfx->lock); |
| } |
| |
| static void stmfx_irq_mask(struct irq_data *data) |
| { |
| struct stmfx *stmfx = irq_data_get_irq_chip_data(data); |
| |
| stmfx->irq_src &= ~BIT(data->hwirq % 8); |
| } |
| |
| static void stmfx_irq_unmask(struct irq_data *data) |
| { |
| struct stmfx *stmfx = irq_data_get_irq_chip_data(data); |
| |
| stmfx->irq_src |= BIT(data->hwirq % 8); |
| } |
| |
| static struct irq_chip stmfx_irq_chip = { |
| .name = "stmfx-core", |
| .irq_bus_lock = stmfx_irq_bus_lock, |
| .irq_bus_sync_unlock = stmfx_irq_bus_sync_unlock, |
| .irq_mask = stmfx_irq_mask, |
| .irq_unmask = stmfx_irq_unmask, |
| }; |
| |
| static irqreturn_t stmfx_irq_handler(int irq, void *data) |
| { |
| struct stmfx *stmfx = data; |
| unsigned long bits; |
| u32 pending, ack; |
| int n, ret; |
| |
| ret = regmap_read(stmfx->map, STMFX_REG_IRQ_PENDING, &pending); |
| if (ret) |
| return IRQ_NONE; |
| |
| /* |
| * There is no ACK for GPIO, MFX_REG_IRQ_PENDING_GPIO is a logical OR |
| * of MFX_REG_IRQ_GPI _PENDING1/_PENDING2/_PENDING3 |
| */ |
| ack = pending & ~BIT(STMFX_REG_IRQ_SRC_EN_GPIO); |
| if (ack) { |
| ret = regmap_write(stmfx->map, STMFX_REG_IRQ_ACK, ack); |
| if (ret) |
| return IRQ_NONE; |
| } |
| |
| bits = pending; |
| for_each_set_bit(n, &bits, STMFX_REG_IRQ_SRC_MAX) |
| handle_nested_irq(irq_find_mapping(stmfx->irq_domain, n)); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int stmfx_irq_map(struct irq_domain *d, unsigned int virq, |
| irq_hw_number_t hwirq) |
| { |
| irq_set_chip_data(virq, d->host_data); |
| irq_set_chip_and_handler(virq, &stmfx_irq_chip, handle_simple_irq); |
| irq_set_nested_thread(virq, 1); |
| irq_set_noprobe(virq); |
| |
| return 0; |
| } |
| |
| static void stmfx_irq_unmap(struct irq_domain *d, unsigned int virq) |
| { |
| irq_set_chip_and_handler(virq, NULL, NULL); |
| irq_set_chip_data(virq, NULL); |
| } |
| |
| static const struct irq_domain_ops stmfx_irq_ops = { |
| .map = stmfx_irq_map, |
| .unmap = stmfx_irq_unmap, |
| }; |
| |
| static void stmfx_irq_exit(struct i2c_client *client) |
| { |
| struct stmfx *stmfx = i2c_get_clientdata(client); |
| int hwirq; |
| |
| for (hwirq = 0; hwirq < STMFX_REG_IRQ_SRC_MAX; hwirq++) |
| irq_dispose_mapping(irq_find_mapping(stmfx->irq_domain, hwirq)); |
| |
| irq_domain_remove(stmfx->irq_domain); |
| } |
| |
| static int stmfx_irq_init(struct i2c_client *client) |
| { |
| struct stmfx *stmfx = i2c_get_clientdata(client); |
| u32 irqoutpin = 0, irqtrigger; |
| int ret; |
| |
| stmfx->irq_domain = irq_domain_add_simple(stmfx->dev->of_node, |
| STMFX_REG_IRQ_SRC_MAX, 0, |
| &stmfx_irq_ops, stmfx); |
| if (!stmfx->irq_domain) { |
| dev_err(stmfx->dev, "Failed to create IRQ domain\n"); |
| return -EINVAL; |
| } |
| |
| if (!of_property_read_bool(stmfx->dev->of_node, "drive-open-drain")) |
| irqoutpin |= STMFX_REG_IRQ_OUT_PIN_TYPE; |
| |
| irqtrigger = irq_get_trigger_type(client->irq); |
| if ((irqtrigger & IRQ_TYPE_EDGE_RISING) || |
| (irqtrigger & IRQ_TYPE_LEVEL_HIGH)) |
| irqoutpin |= STMFX_REG_IRQ_OUT_PIN_POL; |
| |
| ret = regmap_write(stmfx->map, STMFX_REG_IRQ_OUT_PIN, irqoutpin); |
| if (ret) |
| goto irq_exit; |
| |
| ret = devm_request_threaded_irq(stmfx->dev, client->irq, |
| NULL, stmfx_irq_handler, |
| irqtrigger | IRQF_ONESHOT, |
| "stmfx", stmfx); |
| if (ret) |
| goto irq_exit; |
| |
| stmfx->irq = client->irq; |
| |
| return 0; |
| |
| irq_exit: |
| stmfx_irq_exit(client); |
| |
| return ret; |
| } |
| |
| static int stmfx_chip_reset(struct stmfx *stmfx) |
| { |
| int ret; |
| |
| ret = regmap_write(stmfx->map, STMFX_REG_SYS_CTRL, |
| STMFX_REG_SYS_CTRL_SWRST); |
| if (ret) |
| return ret; |
| |
| msleep(STMFX_BOOT_TIME_MS); |
| |
| return ret; |
| } |
| |
| static int stmfx_chip_init(struct i2c_client *client) |
| { |
| struct stmfx *stmfx = i2c_get_clientdata(client); |
| u32 id; |
| u8 version[2]; |
| int ret; |
| |
| stmfx->vdd = devm_regulator_get_optional(&client->dev, "vdd"); |
| ret = PTR_ERR_OR_ZERO(stmfx->vdd); |
| if (ret == -ENODEV) { |
| stmfx->vdd = NULL; |
| } else if (ret == -EPROBE_DEFER) { |
| return ret; |
| } else if (ret) { |
| dev_err(&client->dev, "Failed to get VDD regulator: %d\n", ret); |
| return ret; |
| } |
| |
| if (stmfx->vdd) { |
| ret = regulator_enable(stmfx->vdd); |
| if (ret) { |
| dev_err(&client->dev, "VDD enable failed: %d\n", ret); |
| return ret; |
| } |
| } |
| |
| ret = regmap_read(stmfx->map, STMFX_REG_CHIP_ID, &id); |
| if (ret) { |
| dev_err(&client->dev, "Error reading chip ID: %d\n", ret); |
| goto err; |
| } |
| |
| /* |
| * Check that ID is the complement of the I2C address: |
| * STMFX I2C address follows the 7-bit format (MSB), that's why |
| * client->addr is shifted. |
| * |
| * STMFX_I2C_ADDR| STMFX | Linux |
| * input pin | I2C device address | I2C device address |
| *--------------------------------------------------------- |
| * 0 | b: 1000 010x h:0x84 | 0x42 |
| * 1 | b: 1000 011x h:0x86 | 0x43 |
| */ |
| if (FIELD_GET(STMFX_REG_CHIP_ID_MASK, ~id) != (client->addr << 1)) { |
| dev_err(&client->dev, "Unknown chip ID: %#x\n", id); |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| ret = regmap_bulk_read(stmfx->map, STMFX_REG_FW_VERSION_MSB, |
| version, ARRAY_SIZE(version)); |
| if (ret) { |
| dev_err(&client->dev, "Error reading FW version: %d\n", ret); |
| goto err; |
| } |
| |
| dev_info(&client->dev, "STMFX id: %#x, fw version: %x.%02x\n", |
| id, version[0], version[1]); |
| |
| ret = stmfx_chip_reset(stmfx); |
| if (ret) { |
| dev_err(&client->dev, "Failed to reset chip: %d\n", ret); |
| goto err; |
| } |
| |
| return 0; |
| |
| err: |
| if (stmfx->vdd) |
| return regulator_disable(stmfx->vdd); |
| |
| return ret; |
| } |
| |
| static int stmfx_chip_exit(struct i2c_client *client) |
| { |
| struct stmfx *stmfx = i2c_get_clientdata(client); |
| |
| regmap_write(stmfx->map, STMFX_REG_IRQ_SRC_EN, 0); |
| regmap_write(stmfx->map, STMFX_REG_SYS_CTRL, 0); |
| |
| if (stmfx->vdd) |
| return regulator_disable(stmfx->vdd); |
| |
| return 0; |
| } |
| |
| static int stmfx_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct device *dev = &client->dev; |
| struct stmfx *stmfx; |
| int ret; |
| |
| stmfx = devm_kzalloc(dev, sizeof(*stmfx), GFP_KERNEL); |
| if (!stmfx) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(client, stmfx); |
| |
| stmfx->dev = dev; |
| |
| stmfx->map = devm_regmap_init_i2c(client, &stmfx_regmap_config); |
| if (IS_ERR(stmfx->map)) { |
| ret = PTR_ERR(stmfx->map); |
| dev_err(dev, "Failed to allocate register map: %d\n", ret); |
| return ret; |
| } |
| |
| mutex_init(&stmfx->lock); |
| |
| ret = stmfx_chip_init(client); |
| if (ret) { |
| if (ret == -ETIMEDOUT) |
| return -EPROBE_DEFER; |
| return ret; |
| } |
| |
| if (client->irq < 0) { |
| dev_err(dev, "Failed to get IRQ: %d\n", client->irq); |
| ret = client->irq; |
| goto err_chip_exit; |
| } |
| |
| ret = stmfx_irq_init(client); |
| if (ret) |
| goto err_chip_exit; |
| |
| ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, |
| stmfx_cells, ARRAY_SIZE(stmfx_cells), NULL, |
| 0, stmfx->irq_domain); |
| if (ret) |
| goto err_irq_exit; |
| |
| return 0; |
| |
| err_irq_exit: |
| stmfx_irq_exit(client); |
| err_chip_exit: |
| stmfx_chip_exit(client); |
| |
| return ret; |
| } |
| |
| static int stmfx_remove(struct i2c_client *client) |
| { |
| stmfx_irq_exit(client); |
| |
| return stmfx_chip_exit(client); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int stmfx_suspend(struct device *dev) |
| { |
| struct stmfx *stmfx = dev_get_drvdata(dev); |
| int ret; |
| |
| ret = regmap_raw_read(stmfx->map, STMFX_REG_SYS_CTRL, |
| &stmfx->bkp_sysctrl, sizeof(stmfx->bkp_sysctrl)); |
| if (ret) |
| return ret; |
| |
| ret = regmap_raw_read(stmfx->map, STMFX_REG_IRQ_OUT_PIN, |
| &stmfx->bkp_irqoutpin, |
| sizeof(stmfx->bkp_irqoutpin)); |
| if (ret) |
| return ret; |
| |
| disable_irq(stmfx->irq); |
| |
| if (stmfx->vdd) |
| return regulator_disable(stmfx->vdd); |
| |
| return 0; |
| } |
| |
| static int stmfx_resume(struct device *dev) |
| { |
| struct stmfx *stmfx = dev_get_drvdata(dev); |
| int ret; |
| |
| if (stmfx->vdd) { |
| ret = regulator_enable(stmfx->vdd); |
| if (ret) { |
| dev_err(stmfx->dev, |
| "VDD enable failed: %d\n", ret); |
| return ret; |
| } |
| } |
| |
| /* Reset STMFX - supply has been stopped during suspend */ |
| ret = stmfx_chip_reset(stmfx); |
| if (ret) { |
| dev_err(stmfx->dev, "Failed to reset chip: %d\n", ret); |
| return ret; |
| } |
| |
| ret = regmap_raw_write(stmfx->map, STMFX_REG_SYS_CTRL, |
| &stmfx->bkp_sysctrl, sizeof(stmfx->bkp_sysctrl)); |
| if (ret) |
| return ret; |
| |
| ret = regmap_raw_write(stmfx->map, STMFX_REG_IRQ_OUT_PIN, |
| &stmfx->bkp_irqoutpin, |
| sizeof(stmfx->bkp_irqoutpin)); |
| if (ret) |
| return ret; |
| |
| ret = regmap_raw_write(stmfx->map, STMFX_REG_IRQ_SRC_EN, |
| &stmfx->irq_src, sizeof(stmfx->irq_src)); |
| if (ret) |
| return ret; |
| |
| enable_irq(stmfx->irq); |
| |
| return 0; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(stmfx_dev_pm_ops, stmfx_suspend, stmfx_resume); |
| |
| static const struct of_device_id stmfx_of_match[] = { |
| { .compatible = "st,stmfx-0300", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, stmfx_of_match); |
| |
| static struct i2c_driver stmfx_driver = { |
| .driver = { |
| .name = "stmfx-core", |
| .of_match_table = of_match_ptr(stmfx_of_match), |
| .pm = &stmfx_dev_pm_ops, |
| }, |
| .probe = stmfx_probe, |
| .remove = stmfx_remove, |
| }; |
| module_i2c_driver(stmfx_driver); |
| |
| MODULE_DESCRIPTION("STMFX core driver"); |
| MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>"); |
| MODULE_LICENSE("GPL v2"); |