| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * PCI Hot Plug Controller Driver for System z |
| * |
| * Copyright 2012 IBM Corp. |
| * |
| * Author(s): |
| * Jan Glauber <jang@linux.vnet.ibm.com> |
| */ |
| |
| #define KMSG_COMPONENT "zpci" |
| #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/pci.h> |
| #include <linux/pci_hotplug.h> |
| #include <asm/pci_debug.h> |
| #include <asm/sclp.h> |
| |
| #define SLOT_NAME_SIZE 10 |
| |
| static int zpci_fn_configured(enum zpci_state state) |
| { |
| return state == ZPCI_FN_STATE_CONFIGURED || |
| state == ZPCI_FN_STATE_ONLINE; |
| } |
| |
| static inline int zdev_configure(struct zpci_dev *zdev) |
| { |
| int ret = sclp_pci_configure(zdev->fid); |
| |
| zpci_dbg(3, "conf fid:%x, rc:%d\n", zdev->fid, ret); |
| if (!ret) |
| zdev->state = ZPCI_FN_STATE_CONFIGURED; |
| |
| return ret; |
| } |
| |
| static inline int zdev_deconfigure(struct zpci_dev *zdev) |
| { |
| int ret = sclp_pci_deconfigure(zdev->fid); |
| |
| zpci_dbg(3, "deconf fid:%x, rc:%d\n", zdev->fid, ret); |
| if (!ret) |
| zdev->state = ZPCI_FN_STATE_STANDBY; |
| |
| return ret; |
| } |
| |
| static int enable_slot(struct hotplug_slot *hotplug_slot) |
| { |
| struct zpci_dev *zdev = container_of(hotplug_slot, struct zpci_dev, |
| hotplug_slot); |
| struct zpci_bus *zbus = zdev->zbus; |
| int rc; |
| |
| if (zdev->state != ZPCI_FN_STATE_STANDBY) |
| return -EIO; |
| |
| rc = zdev_configure(zdev); |
| if (rc) |
| return rc; |
| |
| rc = zpci_enable_device(zdev); |
| if (rc) |
| goto out_deconfigure; |
| |
| pci_scan_slot(zbus->bus, zdev->devfn); |
| pci_lock_rescan_remove(); |
| pci_bus_add_devices(zbus->bus); |
| pci_unlock_rescan_remove(); |
| |
| return rc; |
| |
| out_deconfigure: |
| zdev_deconfigure(zdev); |
| return rc; |
| } |
| |
| static int disable_slot(struct hotplug_slot *hotplug_slot) |
| { |
| struct zpci_dev *zdev = container_of(hotplug_slot, struct zpci_dev, |
| hotplug_slot); |
| struct pci_dev *pdev; |
| struct zpci_bus *zbus = zdev->zbus; |
| int rc; |
| |
| if (!zpci_fn_configured(zdev->state)) |
| return -EIO; |
| |
| pdev = pci_get_slot(zbus->bus, zdev->devfn); |
| if (pdev) { |
| if (pci_num_vf(pdev)) |
| return -EBUSY; |
| |
| pci_stop_and_remove_bus_device_locked(pdev); |
| pci_dev_put(pdev); |
| } |
| |
| rc = zpci_disable_device(zdev); |
| if (rc) |
| return rc; |
| |
| return zdev_deconfigure(zdev); |
| } |
| |
| static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value) |
| { |
| struct zpci_dev *zdev = container_of(hotplug_slot, struct zpci_dev, |
| hotplug_slot); |
| |
| switch (zdev->state) { |
| case ZPCI_FN_STATE_STANDBY: |
| *value = 0; |
| break; |
| default: |
| *value = 1; |
| break; |
| } |
| return 0; |
| } |
| |
| static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) |
| { |
| /* if the slot exits it always contains a function */ |
| *value = 1; |
| return 0; |
| } |
| |
| static const struct hotplug_slot_ops s390_hotplug_slot_ops = { |
| .enable_slot = enable_slot, |
| .disable_slot = disable_slot, |
| .get_power_status = get_power_status, |
| .get_adapter_status = get_adapter_status, |
| }; |
| |
| int zpci_init_slot(struct zpci_dev *zdev) |
| { |
| char name[SLOT_NAME_SIZE]; |
| struct zpci_bus *zbus = zdev->zbus; |
| |
| zdev->hotplug_slot.ops = &s390_hotplug_slot_ops; |
| |
| snprintf(name, SLOT_NAME_SIZE, "%08x", zdev->fid); |
| return pci_hp_register(&zdev->hotplug_slot, zbus->bus, |
| zdev->devfn, name); |
| } |
| |
| void zpci_exit_slot(struct zpci_dev *zdev) |
| { |
| pci_hp_deregister(&zdev->hotplug_slot); |
| } |