media: mx2_camera: Fix mbus format handling
Do not use MX2_CAMERA_SWAP16 and MX2_CAMERA_PACK_DIR_MSB flags. The driver
must negotiate with the attached sensor whether the mbus format is UYUV or
YUYV and set CSICR1 configuration accordingly.
This is needed for the video function on mach-imx27_visstrim_m10.c to
perform properly, since an earlier version of this patch has been proven
wrong and has been reverted and a commit, depending on it: "[media]
i.MX27: visstrim_m10: Remove use of MX2_CAMERA_SWAP16" is in the mainline.
Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[ g.liakhovetski@gmx.de: move a macro definition to a more logical place ]
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
[ Applying directly because Mauro is on vacation - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c
index 41f9a25..637bde8 100644
--- a/drivers/media/video/mx2_camera.c
+++ b/drivers/media/video/mx2_camera.c
@@ -83,6 +83,7 @@
#define CSICR1_INV_DATA (1 << 3)
#define CSICR1_INV_PCLK (1 << 2)
#define CSICR1_REDGE (1 << 1)
+#define CSICR1_FMT_MASK (CSICR1_PACK_DIR | CSICR1_SWAP16_EN)
#define SHIFT_STATFF_LEVEL 22
#define SHIFT_RXFF_LEVEL 19
@@ -230,6 +231,7 @@
u32 src_pixel;
u32 ch1_pixel;
u32 irq_flags;
+ u32 csicr1;
};
/* prp resizing parameters */
@@ -330,6 +332,7 @@
.ch1_pixel = 0x2ca00565, /* RGB565 */
.irq_flags = PRP_INTR_RDERR | PRP_INTR_CH1WERR |
PRP_INTR_CH1FC | PRP_INTR_LBOVF,
+ .csicr1 = 0,
}
},
{
@@ -343,6 +346,21 @@
.irq_flags = PRP_INTR_RDERR | PRP_INTR_CH2WERR |
PRP_INTR_CH2FC | PRP_INTR_LBOVF |
PRP_INTR_CH2OVF,
+ .csicr1 = CSICR1_PACK_DIR,
+ }
+ },
+ {
+ .in_fmt = V4L2_MBUS_FMT_UYVY8_2X8,
+ .out_fmt = V4L2_PIX_FMT_YUV420,
+ .cfg = {
+ .channel = 2,
+ .in_fmt = PRP_CNTL_DATA_IN_YUV422,
+ .out_fmt = PRP_CNTL_CH2_OUT_YUV420,
+ .src_pixel = 0x22000888, /* YUV422 (YUYV) */
+ .irq_flags = PRP_INTR_RDERR | PRP_INTR_CH2WERR |
+ PRP_INTR_CH2FC | PRP_INTR_LBOVF |
+ PRP_INTR_CH2OVF,
+ .csicr1 = CSICR1_SWAP16_EN,
}
},
};
@@ -1015,14 +1033,14 @@
return ret;
}
+ csicr1 = (csicr1 & ~CSICR1_FMT_MASK) | pcdev->emma_prp->cfg.csicr1;
+
if (common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
csicr1 |= CSICR1_REDGE;
if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
csicr1 |= CSICR1_SOF_POL;
if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
csicr1 |= CSICR1_HSYNC_POL;
- if (pcdev->platform_flags & MX2_CAMERA_SWAP16)
- csicr1 |= CSICR1_SWAP16_EN;
if (pcdev->platform_flags & MX2_CAMERA_EXT_VSYNC)
csicr1 |= CSICR1_EXT_VSYNC;
if (pcdev->platform_flags & MX2_CAMERA_CCIR)
@@ -1033,8 +1051,6 @@
csicr1 |= CSICR1_GCLK_MODE;
if (pcdev->platform_flags & MX2_CAMERA_INV_DATA)
csicr1 |= CSICR1_INV_DATA;
- if (pcdev->platform_flags & MX2_CAMERA_PACK_DIR_MSB)
- csicr1 |= CSICR1_PACK_DIR;
pcdev->csicr1 = csicr1;
@@ -1109,7 +1125,8 @@
return 0;
}
- if (code == V4L2_MBUS_FMT_YUYV8_2X8) {
+ if (code == V4L2_MBUS_FMT_YUYV8_2X8 ||
+ code == V4L2_MBUS_FMT_UYVY8_2X8) {
formats++;
if (xlate) {
/*
