[CPUFREQ] Improve Error reporting in powernow-k8
This patch cleans up some error messages in the
powernow-k8 driver and makes them more understandable.
Signed-off-by: Jacob Shin <jacob.shin@amd.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
index 68a1fc8..3497827 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
@@ -45,7 +45,7 @@
#define PFX "powernow-k8: "
#define BFX PFX "BIOS error: "
-#define VERSION "version 1.50.4"
+#define VERSION "version 1.50.5"
#include "powernow-k8.h"
/* serialize freq changes */
@@ -464,7 +464,7 @@
set_cpus_allowed(current, cpumask_of_cpu(cpu));
if (smp_processor_id() != cpu) {
- printk(KERN_ERR "limiting to cpu %u failed\n", cpu);
+ printk(KERN_ERR PFX "limiting to cpu %u failed\n", cpu);
goto out;
}
@@ -517,22 +517,28 @@
printk(KERN_ERR BFX "maxvid exceeded with pstate %d\n", j);
return -ENODEV;
}
- if ((pst[j].fid > MAX_FID)
- || (pst[j].fid & 1)
- || (j && (pst[j].fid < HI_FID_TABLE_BOTTOM))) {
+ if (pst[j].fid > MAX_FID) {
+ printk(KERN_ERR BFX "maxfid exceeded with pstate %d\n", j);
+ return -ENODEV;
+ }
+ if (pst[j].fid & 1) {
+ printk(KERN_ERR BFX "fid invalid - %d : 0x%x\n", j, pst[j].fid);
+ return -EINVAL;
+ }
+ if (j && (pst[j].fid < HI_FID_TABLE_BOTTOM)) {
/* Only first fid is allowed to be in "low" range */
- printk(KERN_ERR PFX "two low fids - %d : 0x%x\n", j, pst[j].fid);
+ printk(KERN_ERR BFX "two low fids - %d : 0x%x\n", j, pst[j].fid);
return -EINVAL;
}
if (pst[j].fid < lastfid)
lastfid = pst[j].fid;
}
if (lastfid & 1) {
- printk(KERN_ERR PFX "lastfid invalid\n");
+ printk(KERN_ERR BFX "lastfid invalid\n");
return -EINVAL;
}
if (lastfid > LO_FID_TABLE_TOP)
- printk(KERN_INFO PFX "first fid not from lo freq table\n");
+ printk(KERN_INFO BFX "first fid not from lo freq table\n");
return 0;
}
@@ -912,7 +918,7 @@
set_cpus_allowed(current, cpumask_of_cpu(pol->cpu));
if (smp_processor_id() != pol->cpu) {
- printk(KERN_ERR "limiting to cpu %u failed\n", pol->cpu);
+ printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
goto err_out;
}
@@ -982,6 +988,9 @@
cpumask_t oldmask = CPU_MASK_ALL;
int rc, i;
+ if (!cpu_online(pol->cpu))
+ return -ENODEV;
+
if (!check_supported_cpu(pol->cpu))
return -ENODEV;
@@ -1021,7 +1030,7 @@
set_cpus_allowed(current, cpumask_of_cpu(pol->cpu));
if (smp_processor_id() != pol->cpu) {
- printk(KERN_ERR "limiting to cpu %u failed\n", pol->cpu);
+ printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
goto err_out;
}
@@ -1162,7 +1171,7 @@
cpufreq_unregister_driver(&cpufreq_amd64_driver);
}
-MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com.");
+MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com>");
MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver.");
MODULE_LICENSE("GPL");
