Merge remote-tracking branches 'spi/topic/pxa2xx', 'spi/topic/qspi', 'spi/topic/s3c24xx', 'spi/topic/s3c64xx', 'spi/topic/sh', 'spi/topic/tegra114', 'spi/topic/tegra20-sflash', 'spi/topic/tegra20-slink', 'spi/topic/txx9' and 'spi/topic/xcomm' into spi-linus
diff --git a/Documentation/devicetree/bindings/spi/ti_qspi.txt b/Documentation/devicetree/bindings/spi/ti_qspi.txt
index 1f9641a..601a360 100644
--- a/Documentation/devicetree/bindings/spi/ti_qspi.txt
+++ b/Documentation/devicetree/bindings/spi/ti_qspi.txt
@@ -3,6 +3,11 @@
Required properties:
- compatible : should be "ti,dra7xxx-qspi" or "ti,am4372-qspi".
- reg: Should contain QSPI registers location and length.
+- reg-names: Should contain the resource reg names.
+ - qspi_base: Qspi configuration register Address space
+ - qspi_mmap: Memory mapped Address space
+ - (optional) qspi_ctrlmod: Control module Address space
+- interrupts: should contain the qspi interrupt number.
- #address-cells, #size-cells : Must be present if the device has sub-nodes
- ti,hwmods: Name of the hwmod associated to the QSPI
@@ -14,7 +19,8 @@
qspi: qspi@4b300000 {
compatible = "ti,dra7xxx-qspi";
- reg = <0x4b300000 0x100>;
+ reg = <0x47900000 0x100>, <0x30000000 0x3ffffff>;
+ reg-names = "qspi_base", "qspi_mmap";
#address-cells = <1>;
#size-cells = <0>;
spi-max-frequency = <25000000>;
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c1f1a7e..ba0e232 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -723,6 +723,7 @@
bool "Samsung S3C64XX"
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
+ select ARM_AMBA
select ARM_VIC
select CLKDEV_LOOKUP
select CLKSRC_SAMSUNG_PWM
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 2cb8dc5..7094bcc 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -17,9 +17,10 @@
help
Enable S3C6410 CPU support
-config S3C64XX_DMA
- bool "S3C64XX DMA"
- select S3C_DMA
+config S3C64XX_PL080
+ bool "S3C64XX DMA using generic PL08x driver"
+ select AMBA_PL08X
+ select SAMSUNG_DMADEV
config S3C64XX_SETUP_SDHCI
bool
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 6faedcf..58069a7 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -26,7 +26,7 @@
# DMA support
-obj-$(CONFIG_S3C64XX_DMA) += dma.o
+obj-$(CONFIG_S3C64XX_PL080) += pl080.o
# Device support
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h
index bd3bd56..7043e7a 100644
--- a/arch/arm/mach-s3c64xx/common.h
+++ b/arch/arm/mach-s3c64xx/common.h
@@ -58,4 +58,9 @@
static inline int s3c64xx_pm_late_initcall(void) { return 0; }
#endif
+#ifdef CONFIG_S3C64XX_PL080
+extern struct pl08x_platform_data s3c64xx_dma0_plat_data;
+extern struct pl08x_platform_data s3c64xx_dma1_plat_data;
+#endif
+
#endif /* __ARCH_ARM_MACH_S3C64XX_COMMON_H */
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
deleted file mode 100644
index 7e22c21..0000000
--- a/arch/arm/mach-s3c64xx/dma.c
+++ /dev/null
@@ -1,762 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/dma.c
- *
- * Copyright 2009 Openmoko, Inc.
- * Copyright 2009 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX DMA core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/*
- * NOTE: Code in this file is not used when booting with Device Tree support.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/dmapool.h>
-#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/amba/pl080.h>
-#include <linux/of.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#include "regs-sys.h"
-
-/* dma channel state information */
-
-struct s3c64xx_dmac {
- struct device dev;
- struct clk *clk;
- void __iomem *regs;
- struct s3c2410_dma_chan *channels;
- enum dma_ch chanbase;
-};
-
-/* pool to provide LLI buffers */
-static struct dma_pool *dma_pool;
-
-/* Debug configuration and code */
-
-static unsigned char debug_show_buffs = 0;
-
-static void dbg_showchan(struct s3c2410_dma_chan *chan)
-{
- pr_debug("DMA%d: %08x->%08x L %08x C %08x,%08x S %08x\n",
- chan->number,
- readl(chan->regs + PL080_CH_SRC_ADDR),
- readl(chan->regs + PL080_CH_DST_ADDR),
- readl(chan->regs + PL080_CH_LLI),
- readl(chan->regs + PL080_CH_CONTROL),
- readl(chan->regs + PL080S_CH_CONTROL2),
- readl(chan->regs + PL080S_CH_CONFIG));
-}
-
-static void show_lli(struct pl080s_lli *lli)
-{
- pr_debug("LLI[%p] %08x->%08x, NL %08x C %08x,%08x\n",
- lli, lli->src_addr, lli->dst_addr, lli->next_lli,
- lli->control0, lli->control1);
-}
-
-static void dbg_showbuffs(struct s3c2410_dma_chan *chan)
-{
- struct s3c64xx_dma_buff *ptr;
- struct s3c64xx_dma_buff *end;
-
- pr_debug("DMA%d: buffs next %p, curr %p, end %p\n",
- chan->number, chan->next, chan->curr, chan->end);
-
- ptr = chan->next;
- end = chan->end;
-
- if (debug_show_buffs) {
- for (; ptr != NULL; ptr = ptr->next) {
- pr_debug("DMA%d: %08x ",
- chan->number, ptr->lli_dma);
- show_lli(ptr->lli);
- }
- }
-}
-
-/* End of Debug */
-
-static struct s3c2410_dma_chan *s3c64xx_dma_map_channel(unsigned int channel)
-{
- struct s3c2410_dma_chan *chan;
- unsigned int start, offs;
-
- start = 0;
-
- if (channel >= DMACH_PCM1_TX)
- start = 8;
-
- for (offs = 0; offs < 8; offs++) {
- chan = &s3c2410_chans[start + offs];
- if (!chan->in_use)
- goto found;
- }
-
- return NULL;
-
-found:
- s3c_dma_chan_map[channel] = chan;
- return chan;
-}
-
-int s3c2410_dma_config(enum dma_ch channel, int xferunit)
-{
- struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
- if (chan == NULL)
- return -EINVAL;
-
- switch (xferunit) {
- case 1:
- chan->hw_width = 0;
- break;
- case 2:
- chan->hw_width = 1;
- break;
- case 4:
- chan->hw_width = 2;
- break;
- default:
- printk(KERN_ERR "%s: illegal width %d\n", __func__, xferunit);
- return -EINVAL;
- }
-
- return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_config);
-
-static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
- struct pl080s_lli *lli,
- dma_addr_t data, int size)
-{
- dma_addr_t src, dst;
- u32 control0, control1;
-
- switch (chan->source) {
- case DMA_FROM_DEVICE:
- src = chan->dev_addr;
- dst = data;
- control0 = PL080_CONTROL_SRC_AHB2;
- control0 |= PL080_CONTROL_DST_INCR;
- break;
-
- case DMA_TO_DEVICE:
- src = data;
- dst = chan->dev_addr;
- control0 = PL080_CONTROL_DST_AHB2;
- control0 |= PL080_CONTROL_SRC_INCR;
- break;
- default:
- BUG();
- }
-
- /* note, we do not currently setup any of the burst controls */
-
- control1 = size >> chan->hw_width; /* size in no of xfers */
- control0 |= PL080_CONTROL_PROT_SYS; /* always in priv. mode */
- control0 |= PL080_CONTROL_TC_IRQ_EN; /* always fire IRQ */
- control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
- control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
-
- lli->src_addr = src;
- lli->dst_addr = dst;
- lli->next_lli = 0;
- lli->control0 = control0;
- lli->control1 = control1;
-}
-
-static void s3c64xx_lli_to_regs(struct s3c2410_dma_chan *chan,
- struct pl080s_lli *lli)
-{
- void __iomem *regs = chan->regs;
-
- pr_debug("%s: LLI %p => regs\n", __func__, lli);
- show_lli(lli);
-
- writel(lli->src_addr, regs + PL080_CH_SRC_ADDR);
- writel(lli->dst_addr, regs + PL080_CH_DST_ADDR);
- writel(lli->next_lli, regs + PL080_CH_LLI);
- writel(lli->control0, regs + PL080_CH_CONTROL);
- writel(lli->control1, regs + PL080S_CH_CONTROL2);
-}
-
-static int s3c64xx_dma_start(struct s3c2410_dma_chan *chan)
-{
- struct s3c64xx_dmac *dmac = chan->dmac;
- u32 config;
- u32 bit = chan->bit;
-
- dbg_showchan(chan);
-
- pr_debug("%s: clearing interrupts\n", __func__);
-
- /* clear interrupts */
- writel(bit, dmac->regs + PL080_TC_CLEAR);
- writel(bit, dmac->regs + PL080_ERR_CLEAR);
-
- pr_debug("%s: starting channel\n", __func__);
-
- config = readl(chan->regs + PL080S_CH_CONFIG);
- config |= PL080_CONFIG_ENABLE;
- config &= ~PL080_CONFIG_HALT;
-
- pr_debug("%s: writing config %08x\n", __func__, config);
- writel(config, chan->regs + PL080S_CH_CONFIG);
-
- return 0;
-}
-
-static int s3c64xx_dma_stop(struct s3c2410_dma_chan *chan)
-{
- u32 config;
- int timeout;
-
- pr_debug("%s: stopping channel\n", __func__);
-
- dbg_showchan(chan);
-
- config = readl(chan->regs + PL080S_CH_CONFIG);
- config |= PL080_CONFIG_HALT;
- writel(config, chan->regs + PL080S_CH_CONFIG);
-
- timeout = 1000;
- do {
- config = readl(chan->regs + PL080S_CH_CONFIG);
- pr_debug("%s: %d - config %08x\n", __func__, timeout, config);
- if (config & PL080_CONFIG_ACTIVE)
- udelay(10);
- else
- break;
- } while (--timeout > 0);
-
- if (config & PL080_CONFIG_ACTIVE) {
- printk(KERN_ERR "%s: channel still active\n", __func__);
- return -EFAULT;
- }
-
- config = readl(chan->regs + PL080S_CH_CONFIG);
- config &= ~PL080_CONFIG_ENABLE;
- writel(config, chan->regs + PL080S_CH_CONFIG);
-
- return 0;
-}
-
-static inline void s3c64xx_dma_bufffdone(struct s3c2410_dma_chan *chan,
- struct s3c64xx_dma_buff *buf,
- enum s3c2410_dma_buffresult result)
-{
- if (chan->callback_fn != NULL)
- (chan->callback_fn)(chan, buf->pw, 0, result);
-}
-
-static void s3c64xx_dma_freebuff(struct s3c64xx_dma_buff *buff)
-{
- dma_pool_free(dma_pool, buff->lli, buff->lli_dma);
- kfree(buff);
-}
-
-static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan)
-{
- struct s3c64xx_dma_buff *buff, *next;
- u32 config;
-
- dbg_showchan(chan);
-
- pr_debug("%s: flushing channel\n", __func__);
-
- config = readl(chan->regs + PL080S_CH_CONFIG);
- config &= ~PL080_CONFIG_ENABLE;
- writel(config, chan->regs + PL080S_CH_CONFIG);
-
- /* dump all the buffers associated with this channel */
-
- for (buff = chan->curr; buff != NULL; buff = next) {
- next = buff->next;
- pr_debug("%s: buff %p (next %p)\n", __func__, buff, buff->next);
-
- s3c64xx_dma_bufffdone(chan, buff, S3C2410_RES_ABORT);
- s3c64xx_dma_freebuff(buff);
- }
-
- chan->curr = chan->next = chan->end = NULL;
-
- return 0;
-}
-
-int s3c2410_dma_ctrl(enum dma_ch channel, enum s3c2410_chan_op op)
-{
- struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
- WARN_ON(!chan);
- if (!chan)
- return -EINVAL;
-
- switch (op) {
- case S3C2410_DMAOP_START:
- return s3c64xx_dma_start(chan);
-
- case S3C2410_DMAOP_STOP:
- return s3c64xx_dma_stop(chan);
-
- case S3C2410_DMAOP_FLUSH:
- return s3c64xx_dma_flush(chan);
-
- /* believe PAUSE/RESUME are no-ops */
- case S3C2410_DMAOP_PAUSE:
- case S3C2410_DMAOP_RESUME:
- case S3C2410_DMAOP_STARTED:
- case S3C2410_DMAOP_TIMEOUT:
- return 0;
- }
-
- return -ENOENT;
-}
-EXPORT_SYMBOL(s3c2410_dma_ctrl);
-
-/* s3c2410_dma_enque
- *
- */
-
-int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
- dma_addr_t data, int size)
-{
- struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
- struct s3c64xx_dma_buff *next;
- struct s3c64xx_dma_buff *buff;
- struct pl080s_lli *lli;
- unsigned long flags;
- int ret;
-
- WARN_ON(!chan);
- if (!chan)
- return -EINVAL;
-
- buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_ATOMIC);
- if (!buff) {
- printk(KERN_ERR "%s: no memory for buffer\n", __func__);
- return -ENOMEM;
- }
-
- lli = dma_pool_alloc(dma_pool, GFP_ATOMIC, &buff->lli_dma);
- if (!lli) {
- printk(KERN_ERR "%s: no memory for lli\n", __func__);
- ret = -ENOMEM;
- goto err_buff;
- }
-
- pr_debug("%s: buff %p, dp %08x lli (%p, %08x) %d\n",
- __func__, buff, data, lli, (u32)buff->lli_dma, size);
-
- buff->lli = lli;
- buff->pw = id;
-
- s3c64xx_dma_fill_lli(chan, lli, data, size);
-
- local_irq_save(flags);
-
- if ((next = chan->next) != NULL) {
- struct s3c64xx_dma_buff *end = chan->end;
- struct pl080s_lli *endlli = end->lli;
-
- pr_debug("enquing onto channel\n");
-
- end->next = buff;
- endlli->next_lli = buff->lli_dma;
-
- if (chan->flags & S3C2410_DMAF_CIRCULAR) {
- struct s3c64xx_dma_buff *curr = chan->curr;
- lli->next_lli = curr->lli_dma;
- }
-
- if (next == chan->curr) {
- writel(buff->lli_dma, chan->regs + PL080_CH_LLI);
- chan->next = buff;
- }
-
- show_lli(endlli);
- chan->end = buff;
- } else {
- pr_debug("enquing onto empty channel\n");
-
- chan->curr = buff;
- chan->next = buff;
- chan->end = buff;
-
- s3c64xx_lli_to_regs(chan, lli);
- }
-
- local_irq_restore(flags);
-
- show_lli(lli);
-
- dbg_showchan(chan);
- dbg_showbuffs(chan);
- return 0;
-
-err_buff:
- kfree(buff);
- return ret;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_enqueue);
-
-
-int s3c2410_dma_devconfig(enum dma_ch channel,
- enum dma_data_direction source,
- unsigned long devaddr)
-{
- struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
- u32 peripheral;
- u32 config = 0;
-
- pr_debug("%s: channel %d, source %d, dev %08lx, chan %p\n",
- __func__, channel, source, devaddr, chan);
-
- WARN_ON(!chan);
- if (!chan)
- return -EINVAL;
-
- peripheral = (chan->peripheral & 0xf);
- chan->source = source;
- chan->dev_addr = devaddr;
-
- pr_debug("%s: peripheral %d\n", __func__, peripheral);
-
- switch (source) {
- case DMA_FROM_DEVICE:
- config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
- config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
- break;
- case DMA_TO_DEVICE:
- config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
- config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
- break;
- default:
- printk(KERN_ERR "%s: bad source\n", __func__);
- return -EINVAL;
- }
-
- /* allow TC and ERR interrupts */
- config |= PL080_CONFIG_TC_IRQ_MASK;
- config |= PL080_CONFIG_ERR_IRQ_MASK;
-
- pr_debug("%s: config %08x\n", __func__, config);
-
- writel(config, chan->regs + PL080S_CH_CONFIG);
-
- return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_devconfig);
-
-
-int s3c2410_dma_getposition(enum dma_ch channel,
- dma_addr_t *src, dma_addr_t *dst)
-{
- struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
-
- WARN_ON(!chan);
- if (!chan)
- return -EINVAL;
-
- if (src != NULL)
- *src = readl(chan->regs + PL080_CH_SRC_ADDR);
-
- if (dst != NULL)
- *dst = readl(chan->regs + PL080_CH_DST_ADDR);
-
- return 0;
-}
-EXPORT_SYMBOL(s3c2410_dma_getposition);
-
-/* s3c2410_request_dma
- *
- * get control of an dma channel
-*/
-
-int s3c2410_dma_request(enum dma_ch channel,
- struct s3c2410_dma_client *client,
- void *dev)
-{
- struct s3c2410_dma_chan *chan;
- unsigned long flags;
-
- pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
- channel, client->name, dev);
-
- local_irq_save(flags);
-
- chan = s3c64xx_dma_map_channel(channel);
- if (chan == NULL) {
- local_irq_restore(flags);
- return -EBUSY;
- }
-
- dbg_showchan(chan);
-
- chan->client = client;
- chan->in_use = 1;
- chan->peripheral = channel;
- chan->flags = 0;
-
- local_irq_restore(flags);
-
- /* need to setup */
-
- pr_debug("%s: channel initialised, %p\n", __func__, chan);
-
- return chan->number | DMACH_LOW_LEVEL;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_request);
-
-/* s3c2410_dma_free
- *
- * release the given channel back to the system, will stop and flush
- * any outstanding transfers, and ensure the channel is ready for the
- * next claimant.
- *
- * Note, although a warning is currently printed if the freeing client
- * info is not the same as the registrant's client info, the free is still
- * allowed to go through.
-*/
-
-int s3c2410_dma_free(enum dma_ch channel, struct s3c2410_dma_client *client)
-{
- struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
- unsigned long flags;
-
- if (chan == NULL)
- return -EINVAL;
-
- local_irq_save(flags);
-
- if (chan->client != client) {
- printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
- channel, chan->client, client);
- }
-
- /* sort out stopping and freeing the channel */
-
-
- chan->client = NULL;
- chan->in_use = 0;
-
- if (!(channel & DMACH_LOW_LEVEL))
- s3c_dma_chan_map[channel] = NULL;
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_free);
-
-static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
-{
- struct s3c64xx_dmac *dmac = pw;
- struct s3c2410_dma_chan *chan;
- enum s3c2410_dma_buffresult res;
- u32 tcstat, errstat;
- u32 bit;
- int offs;
-
- tcstat = readl(dmac->regs + PL080_TC_STATUS);
- errstat = readl(dmac->regs + PL080_ERR_STATUS);
-
- for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) {
- struct s3c64xx_dma_buff *buff;
-
- if (!(errstat & bit) && !(tcstat & bit))
- continue;
-
- chan = dmac->channels + offs;
- res = S3C2410_RES_ERR;
-
- if (tcstat & bit) {
- writel(bit, dmac->regs + PL080_TC_CLEAR);
- res = S3C2410_RES_OK;
- }
-
- if (errstat & bit)
- writel(bit, dmac->regs + PL080_ERR_CLEAR);
-
- /* 'next' points to the buffer that is next to the
- * currently active buffer.
- * For CIRCULAR queues, 'next' will be same as 'curr'
- * when 'end' is the active buffer.
- */
- buff = chan->curr;
- while (buff && buff != chan->next
- && buff->next != chan->next)
- buff = buff->next;
-
- if (!buff)
- BUG();
-
- if (buff == chan->next)
- buff = chan->end;
-
- s3c64xx_dma_bufffdone(chan, buff, res);
-
- /* Free the node and update curr, if non-circular queue */
- if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) {
- chan->curr = buff->next;
- s3c64xx_dma_freebuff(buff);
- }
-
- /* Update 'next' */
- buff = chan->next;
- if (chan->next == chan->end) {
- chan->next = chan->curr;
- if (!(chan->flags & S3C2410_DMAF_CIRCULAR))
- chan->end = NULL;
- } else {
- chan->next = buff->next;
- }
- }
-
- return IRQ_HANDLED;
-}
-
-static struct bus_type dma_subsys = {
- .name = "s3c64xx-dma",
- .dev_name = "s3c64xx-dma",
-};
-
-static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
- int irq, unsigned int base)
-{
- struct s3c2410_dma_chan *chptr = &s3c2410_chans[chno];
- struct s3c64xx_dmac *dmac;
- char clkname[16];
- void __iomem *regs;
- void __iomem *regptr;
- int err, ch;
-
- dmac = kzalloc(sizeof(struct s3c64xx_dmac), GFP_KERNEL);
- if (!dmac) {
- printk(KERN_ERR "%s: failed to alloc mem\n", __func__);
- return -ENOMEM;
- }
-
- dmac->dev.id = chno / 8;
- dmac->dev.bus = &dma_subsys;
-
- err = device_register(&dmac->dev);
- if (err) {
- printk(KERN_ERR "%s: failed to register device\n", __func__);
- goto err_alloc;
- }
-
- regs = ioremap(base, 0x200);
- if (!regs) {
- printk(KERN_ERR "%s: failed to ioremap()\n", __func__);
- err = -ENXIO;
- goto err_dev;
- }
-
- snprintf(clkname, sizeof(clkname), "dma%d", dmac->dev.id);
-
- dmac->clk = clk_get(NULL, clkname);
- if (IS_ERR(dmac->clk)) {
- printk(KERN_ERR "%s: failed to get clock %s\n", __func__, clkname);
- err = PTR_ERR(dmac->clk);
- goto err_map;
- }
-
- clk_prepare_enable(dmac->clk);
-
- dmac->regs = regs;
- dmac->chanbase = chbase;
- dmac->channels = chptr;
-
- err = request_irq(irq, s3c64xx_dma_irq, 0, "DMA", dmac);
- if (err < 0) {
- printk(KERN_ERR "%s: failed to get irq\n", __func__);
- goto err_clk;
- }
-
- regptr = regs + PL080_Cx_BASE(0);
-
- for (ch = 0; ch < 8; ch++, chptr++) {
- pr_debug("%s: registering DMA %d (%p)\n",
- __func__, chno + ch, regptr);
-
- chptr->bit = 1 << ch;
- chptr->number = chno + ch;
- chptr->dmac = dmac;
- chptr->regs = regptr;
- regptr += PL080_Cx_STRIDE;
- }
-
- /* for the moment, permanently enable the controller */
- writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG);
-
- printk(KERN_INFO "PL080: IRQ %d, at %p, channels %d..%d\n",
- irq, regs, chno, chno+8);
-
- return 0;
-
-err_clk:
- clk_disable_unprepare(dmac->clk);
- clk_put(dmac->clk);
-err_map:
- iounmap(regs);
-err_dev:
- device_unregister(&dmac->dev);
-err_alloc:
- kfree(dmac);
- return err;
-}
-
-static int __init s3c64xx_dma_init(void)
-{
- int ret;
-
- /* This driver is not supported when booting with device tree. */
- if (of_have_populated_dt())
- return -ENODEV;
-
- printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
-
- dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0);
- if (!dma_pool) {
- printk(KERN_ERR "%s: failed to create pool\n", __func__);
- return -ENOMEM;
- }
-
- ret = subsys_system_register(&dma_subsys, NULL);
- if (ret) {
- printk(KERN_ERR "%s: failed to create subsys\n", __func__);
- return -ENOMEM;
- }
-
- /* Set all DMA configuration to be DMA, not SDMA */
- writel(0xffffff, S3C64XX_SDMA_SEL);
-
- /* Register standard DMA controllers */
- s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
- s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000);
-
- return 0;
-}
-
-arch_initcall(s3c64xx_dma_init);
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
index fe1a98c..059b1fc8 100644
--- a/arch/arm/mach-s3c64xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -11,51 +11,48 @@
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H __FILE__
-#define S3C_DMA_CHANNELS (16)
+#define S3C64XX_DMA_CHAN(name) ((unsigned long)(name))
-/* see mach-s3c2410/dma.h for notes on dma channel numbers */
+/* DMA0/SDMA0 */
+#define DMACH_UART0 S3C64XX_DMA_CHAN("uart0_tx")
+#define DMACH_UART0_SRC2 S3C64XX_DMA_CHAN("uart0_rx")
+#define DMACH_UART1 S3C64XX_DMA_CHAN("uart1_tx")
+#define DMACH_UART1_SRC2 S3C64XX_DMA_CHAN("uart1_rx")
+#define DMACH_UART2 S3C64XX_DMA_CHAN("uart2_tx")
+#define DMACH_UART2_SRC2 S3C64XX_DMA_CHAN("uart2_rx")
+#define DMACH_UART3 S3C64XX_DMA_CHAN("uart3_tx")
+#define DMACH_UART3_SRC2 S3C64XX_DMA_CHAN("uart3_rx")
+#define DMACH_PCM0_TX S3C64XX_DMA_CHAN("pcm0_tx")
+#define DMACH_PCM0_RX S3C64XX_DMA_CHAN("pcm0_rx")
+#define DMACH_I2S0_OUT S3C64XX_DMA_CHAN("i2s0_tx")
+#define DMACH_I2S0_IN S3C64XX_DMA_CHAN("i2s0_rx")
+#define DMACH_SPI0_TX S3C64XX_DMA_CHAN("spi0_tx")
+#define DMACH_SPI0_RX S3C64XX_DMA_CHAN("spi0_rx")
+#define DMACH_HSI_I2SV40_TX S3C64XX_DMA_CHAN("i2s2_tx")
+#define DMACH_HSI_I2SV40_RX S3C64XX_DMA_CHAN("i2s2_rx")
-/* Note, for the S3C64XX architecture we keep the DMACH_
- * defines in the order they are allocated to [S]DMA0/[S]DMA1
- * so that is easy to do DHACH_ -> DMA controller conversion
- */
+/* DMA1/SDMA1 */
+#define DMACH_PCM1_TX S3C64XX_DMA_CHAN("pcm1_tx")
+#define DMACH_PCM1_RX S3C64XX_DMA_CHAN("pcm1_rx")
+#define DMACH_I2S1_OUT S3C64XX_DMA_CHAN("i2s1_tx")
+#define DMACH_I2S1_IN S3C64XX_DMA_CHAN("i2s1_rx")
+#define DMACH_SPI1_TX S3C64XX_DMA_CHAN("spi1_tx")
+#define DMACH_SPI1_RX S3C64XX_DMA_CHAN("spi1_rx")
+#define DMACH_AC97_PCMOUT S3C64XX_DMA_CHAN("ac97_out")
+#define DMACH_AC97_PCMIN S3C64XX_DMA_CHAN("ac97_in")
+#define DMACH_AC97_MICIN S3C64XX_DMA_CHAN("ac97_mic")
+#define DMACH_PWM S3C64XX_DMA_CHAN("pwm")
+#define DMACH_IRDA S3C64XX_DMA_CHAN("irda")
+#define DMACH_EXTERNAL S3C64XX_DMA_CHAN("external")
+#define DMACH_SECURITY_RX S3C64XX_DMA_CHAN("sec_rx")
+#define DMACH_SECURITY_TX S3C64XX_DMA_CHAN("sec_tx")
+
enum dma_ch {
- /* DMA0/SDMA0 */
- DMACH_UART0 = 0,
- DMACH_UART0_SRC2,
- DMACH_UART1,
- DMACH_UART1_SRC2,
- DMACH_UART2,
- DMACH_UART2_SRC2,
- DMACH_UART3,
- DMACH_UART3_SRC2,
- DMACH_PCM0_TX,
- DMACH_PCM0_RX,
- DMACH_I2S0_OUT,
- DMACH_I2S0_IN,
- DMACH_SPI0_TX,
- DMACH_SPI0_RX,
- DMACH_HSI_I2SV40_TX,
- DMACH_HSI_I2SV40_RX,
+ DMACH_MAX = 32
+};
- /* DMA1/SDMA1 */
- DMACH_PCM1_TX = 16,
- DMACH_PCM1_RX,
- DMACH_I2S1_OUT,
- DMACH_I2S1_IN,
- DMACH_SPI1_TX,
- DMACH_SPI1_RX,
- DMACH_AC97_PCMOUT,
- DMACH_AC97_PCMIN,
- DMACH_AC97_MICIN,
- DMACH_PWM,
- DMACH_IRDA,
- DMACH_EXTERNAL,
- DMACH_RES1,
- DMACH_RES2,
- DMACH_SECURITY_RX, /* SDMA1 only */
- DMACH_SECURITY_TX, /* SDMA1 only */
- DMACH_MAX /* the end */
+struct s3c2410_dma_client {
+ char *name;
};
static inline bool samsung_dma_has_circular(void)
@@ -65,67 +62,10 @@
static inline bool samsung_dma_is_dmadev(void)
{
- return false;
+ return true;
}
-#define S3C2410_DMAF_CIRCULAR (1 << 0)
-#include <plat/dma.h>
-
-#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
-
-struct s3c64xx_dma_buff;
-
-/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
- * @next: Pointer to next buffer in queue or ring.
- * @pw: Client provided identifier
- * @lli: Pointer to hardware descriptor this buffer is associated with.
- * @lli_dma: Hardare address of the descriptor.
- */
-struct s3c64xx_dma_buff {
- struct s3c64xx_dma_buff *next;
-
- void *pw;
- struct pl080s_lli *lli;
- dma_addr_t lli_dma;
-};
-
-struct s3c64xx_dmac;
-
-struct s3c2410_dma_chan {
- unsigned char number; /* number of this dma channel */
- unsigned char in_use; /* channel allocated */
- unsigned char bit; /* bit for enable/disable/etc */
- unsigned char hw_width;
- unsigned char peripheral;
-
- unsigned int flags;
- enum dma_data_direction source;
-
-
- dma_addr_t dev_addr;
-
- struct s3c2410_dma_client *client;
- struct s3c64xx_dmac *dmac; /* pointer to controller */
-
- void __iomem *regs;
-
- /* cdriver callbacks */
- s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */
- s3c2410_dma_opfn_t op_fn; /* channel op callback */
-
- /* buffer list and information */
- struct s3c64xx_dma_buff *curr; /* current dma buffer */
- struct s3c64xx_dma_buff *next; /* next buffer to load */
- struct s3c64xx_dma_buff *end; /* end of queue */
-
- /* note, when channel is running in circular mode, curr is the
- * first buffer enqueued, end is the last and curr is where the
- * last buffer-done event is set-at. The buffers are not freed
- * and the last buffer hardware descriptor points back to the
- * first.
- */
-};
-
-#include <plat/dma-core.h>
+#include <linux/amba/pl08x.h>
+#include <plat/dma-ops.h>
#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c64xx/pl080.c
new file mode 100644
index 0000000..901a984
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/pl080.c
@@ -0,0 +1,244 @@
+/*
+ * Samsung's S3C64XX generic DMA support using amba-pl08x driver.
+ *
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl080.h>
+#include <linux/amba/pl08x.h>
+#include <linux/of.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include "regs-sys.h"
+
+static int pl08x_get_xfer_signal(const struct pl08x_channel_data *cd)
+{
+ return cd->min_signal;
+}
+
+static void pl08x_put_xfer_signal(const struct pl08x_channel_data *cd, int ch)
+{
+}
+
+/*
+ * DMA0
+ */
+
+static struct pl08x_channel_data s3c64xx_dma0_info[] = {
+ {
+ .bus_id = "uart0_tx",
+ .min_signal = 0,
+ .max_signal = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart0_rx",
+ .min_signal = 1,
+ .max_signal = 1,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart1_tx",
+ .min_signal = 2,
+ .max_signal = 2,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart1_rx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart2_tx",
+ .min_signal = 4,
+ .max_signal = 4,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart2_rx",
+ .min_signal = 5,
+ .max_signal = 5,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart3_tx",
+ .min_signal = 6,
+ .max_signal = 6,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "uart3_rx",
+ .min_signal = 7,
+ .max_signal = 7,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "pcm0_tx",
+ .min_signal = 8,
+ .max_signal = 8,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "pcm0_rx",
+ .min_signal = 9,
+ .max_signal = 9,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s0_tx",
+ .min_signal = 10,
+ .max_signal = 10,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s0_rx",
+ .min_signal = 11,
+ .max_signal = 11,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "spi0_tx",
+ .min_signal = 12,
+ .max_signal = 12,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "spi0_rx",
+ .min_signal = 13,
+ .max_signal = 13,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s2_tx",
+ .min_signal = 14,
+ .max_signal = 14,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s2_rx",
+ .min_signal = 15,
+ .max_signal = 15,
+ .periph_buses = PL08X_AHB2,
+ }
+};
+
+struct pl08x_platform_data s3c64xx_dma0_plat_data = {
+ .memcpy_channel = {
+ .bus_id = "memcpy",
+ .cctl_memcpy =
+ (PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT |
+ PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT |
+ PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT |
+ PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT |
+ PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE |
+ PL080_CONTROL_PROT_SYS),
+ },
+ .lli_buses = PL08X_AHB1,
+ .mem_buses = PL08X_AHB1,
+ .get_xfer_signal = pl08x_get_xfer_signal,
+ .put_xfer_signal = pl08x_put_xfer_signal,
+ .slave_channels = s3c64xx_dma0_info,
+ .num_slave_channels = ARRAY_SIZE(s3c64xx_dma0_info),
+};
+
+static AMBA_AHB_DEVICE(s3c64xx_dma0, "dma-pl080s.0", 0,
+ 0x75000000, {IRQ_DMA0}, &s3c64xx_dma0_plat_data);
+
+/*
+ * DMA1
+ */
+
+static struct pl08x_channel_data s3c64xx_dma1_info[] = {
+ {
+ .bus_id = "pcm1_tx",
+ .min_signal = 0,
+ .max_signal = 0,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "pcm1_rx",
+ .min_signal = 1,
+ .max_signal = 1,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s1_tx",
+ .min_signal = 2,
+ .max_signal = 2,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "i2s1_rx",
+ .min_signal = 3,
+ .max_signal = 3,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "spi1_tx",
+ .min_signal = 4,
+ .max_signal = 4,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "spi1_rx",
+ .min_signal = 5,
+ .max_signal = 5,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ac97_out",
+ .min_signal = 6,
+ .max_signal = 6,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ac97_in",
+ .min_signal = 7,
+ .max_signal = 7,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "ac97_mic",
+ .min_signal = 8,
+ .max_signal = 8,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "pwm",
+ .min_signal = 9,
+ .max_signal = 9,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "irda",
+ .min_signal = 10,
+ .max_signal = 10,
+ .periph_buses = PL08X_AHB2,
+ }, {
+ .bus_id = "external",
+ .min_signal = 11,
+ .max_signal = 11,
+ .periph_buses = PL08X_AHB2,
+ },
+};
+
+struct pl08x_platform_data s3c64xx_dma1_plat_data = {
+ .memcpy_channel = {
+ .bus_id = "memcpy",
+ .cctl_memcpy =
+ (PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT |
+ PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT |
+ PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT |
+ PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT |
+ PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE |
+ PL080_CONTROL_PROT_SYS),
+ },
+ .lli_buses = PL08X_AHB1,
+ .mem_buses = PL08X_AHB1,
+ .get_xfer_signal = pl08x_get_xfer_signal,
+ .put_xfer_signal = pl08x_put_xfer_signal,
+ .slave_channels = s3c64xx_dma1_info,
+ .num_slave_channels = ARRAY_SIZE(s3c64xx_dma1_info),
+};
+
+static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0,
+ 0x75100000, {IRQ_DMA1}, &s3c64xx_dma1_plat_data);
+
+static int __init s3c64xx_pl080_init(void)
+{
+ /* Set all DMA configuration to be DMA, not SDMA */
+ writel(0xffffff, S3C64XX_SDMA_SEL);
+
+ if (of_have_populated_dt())
+ return 0;
+
+ amba_device_register(&s3c64xx_dma0_device, &iomem_resource);
+ amba_device_register(&s3c64xx_dma1_device, &iomem_resource);
+
+ return 0;
+}
+arch_initcall(s3c64xx_pl080_init);
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 99a3590..ac07e87 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -1468,6 +1468,8 @@
pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio;
#if defined(CONFIG_PL330_DMA)
pd.filter = pl330_filter;
+#elif defined(CONFIG_S3C64XX_PL080)
+ pd.filter = pl08x_filter_id;
#elif defined(CONFIG_S3C24XX_DMAC)
pd.filter = s3c24xx_dma_filter;
#endif
@@ -1509,8 +1511,10 @@
pd.num_cs = num_cs;
pd.src_clk_nr = src_clk_nr;
pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio;
-#ifdef CONFIG_PL330_DMA
+#if defined(CONFIG_PL330_DMA)
pd.filter = pl330_filter;
+#elif defined(CONFIG_S3C64XX_PL080)
+ pd.filter = pl08x_filter_id;
#endif
s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1);
@@ -1550,8 +1554,10 @@
pd.num_cs = num_cs;
pd.src_clk_nr = src_clk_nr;
pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio;
-#ifdef CONFIG_PL330_DMA
+#if defined(CONFIG_PL330_DMA)
pd.filter = pl330_filter;
+#elif defined(CONFIG_S3C64XX_PL080)
+ pd.filter = pl08x_filter_id;
#endif
s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2);
diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c
index ec0d731..886326e 100644
--- a/arch/arm/plat-samsung/dma-ops.c
+++ b/arch/arm/plat-samsung/dma-ops.c
@@ -18,6 +18,12 @@
#include <mach/dma.h>
+#if defined(CONFIG_PL330_DMA)
+#define dma_filter pl330_filter
+#elif defined(CONFIG_S3C64XX_PL080)
+#define dma_filter pl08x_filter_id
+#endif
+
static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
struct samsung_dma_req *param,
struct device *dev, char *ch_name)
@@ -30,7 +36,7 @@
if (dev->of_node)
return (unsigned)dma_request_slave_channel(dev, ch_name);
else
- return (unsigned)dma_request_channel(mask, pl330_filter,
+ return (unsigned)dma_request_channel(mask, dma_filter,
(void *)dma_ch);
}
diff --git a/arch/arm/plat-samsung/include/plat/fiq.h b/arch/arm/plat-samsung/include/plat/fiq.h
deleted file mode 100644
index 535d06a..0000000
--- a/arch/arm/plat-samsung/include/plat/fiq.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/fiq.h
- *
- * Copyright (c) 2009 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for S3C24XX CPU FIQ support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-extern int s3c24xx_set_fiq(unsigned int irq, bool on);
diff --git a/drivers/clk/samsung/clk-s3c64xx.c b/drivers/clk/samsung/clk-s3c64xx.c
index 7d2c842..8e27aee 100644
--- a/drivers/clk/samsung/clk-s3c64xx.c
+++ b/drivers/clk/samsung/clk-s3c64xx.c
@@ -331,8 +331,8 @@
ALIAS(HCLK_HSMMC1, "s3c-sdhci.1", "mmc_busclk.0"),
ALIAS(HCLK_HSMMC0, "s3c-sdhci.0", "hsmmc"),
ALIAS(HCLK_HSMMC0, "s3c-sdhci.0", "mmc_busclk.0"),
- ALIAS(HCLK_DMA1, NULL, "dma1"),
- ALIAS(HCLK_DMA0, NULL, "dma0"),
+ ALIAS(HCLK_DMA1, "dma-pl080s.1", "apb_pclk"),
+ ALIAS(HCLK_DMA0, "dma-pl080s.0", "apb_pclk"),
ALIAS(HCLK_CAMIF, "s3c-camif", "camif"),
ALIAS(HCLK_LCD, "s3c-fb", "lcd"),
ALIAS(PCLK_SPI1, "s3c6410-spi.1", "spi"),
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 710599f..5072b71 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -402,7 +402,7 @@
config SPI_S3C64XX
tristate "Samsung S3C64XX series type SPI"
depends on PLAT_SAMSUNG
- select S3C64XX_DMA if ARCH_S3C64XX
+ select S3C64XX_PL080 if ARCH_S3C64XX
help
SPI driver for Samsung S3C64XX and newer SoCs.
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index cbc6884..c702fc5 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1268,7 +1268,7 @@
dev_err(&pdev->dev, "shutdown failed with %d\n", status);
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int pxa2xx_spi_suspend(struct device *dev)
{
struct driver_data *drv_data = dev_get_drvdata(dev);
diff --git a/drivers/spi/spi-s3c24xx.c b/drivers/spi/spi-s3c24xx.c
index 0dc32a1..746424a 100644
--- a/drivers/spi/spi-s3c24xx.c
+++ b/drivers/spi/spi-s3c24xx.c
@@ -29,7 +29,6 @@
#include <plat/regs-spi.h>
-#include <plat/fiq.h>
#include <asm/fiq.h>
#include "spi-s3c24xx-fiq.h"
@@ -78,14 +77,12 @@
unsigned char *rx;
struct clk *clk;
- struct resource *ioarea;
struct spi_master *master;
struct spi_device *curdev;
struct device *dev;
struct s3c2410_spi_info *pdata;
};
-
#define SPCON_DEFAULT (S3C2410_SPCON_MSTR | S3C2410_SPCON_SMOD_INT)
#define SPPIN_DEFAULT (S3C2410_SPPIN_KEEP)
@@ -517,8 +514,7 @@
master = spi_alloc_master(&pdev->dev, sizeof(struct s3c24xx_spi));
if (master == NULL) {
dev_err(&pdev->dev, "No memory for spi_master\n");
- err = -ENOMEM;
- goto err_nomem;
+ return -ENOMEM;
}
hw = spi_master_get_devdata(master);
@@ -562,48 +558,32 @@
dev_dbg(hw->dev, "bitbang at %p\n", &hw->bitbang);
/* find and map our resources */
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (res == NULL) {
- dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
- err = -ENOENT;
- goto err_no_iores;
- }
-
- hw->ioarea = request_mem_region(res->start, resource_size(res),
- pdev->name);
-
- if (hw->ioarea == NULL) {
- dev_err(&pdev->dev, "Cannot reserve region\n");
- err = -ENXIO;
- goto err_no_iores;
- }
-
- hw->regs = ioremap(res->start, resource_size(res));
- if (hw->regs == NULL) {
- dev_err(&pdev->dev, "Cannot map IO\n");
- err = -ENXIO;
- goto err_no_iomap;
+ hw->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(hw->regs)) {
+ err = PTR_ERR(hw->regs);
+ goto err_no_pdata;
}
hw->irq = platform_get_irq(pdev, 0);
if (hw->irq < 0) {
dev_err(&pdev->dev, "No IRQ specified\n");
err = -ENOENT;
- goto err_no_irq;
+ goto err_no_pdata;
}
- err = request_irq(hw->irq, s3c24xx_spi_irq, 0, pdev->name, hw);
+ err = devm_request_irq(&pdev->dev, hw->irq, s3c24xx_spi_irq, 0,
+ pdev->name, hw);
if (err) {
dev_err(&pdev->dev, "Cannot claim IRQ\n");
- goto err_no_irq;
+ goto err_no_pdata;
}
- hw->clk = clk_get(&pdev->dev, "spi");
+ hw->clk = devm_clk_get(&pdev->dev, "spi");
if (IS_ERR(hw->clk)) {
dev_err(&pdev->dev, "No clock for device\n");
err = PTR_ERR(hw->clk);
- goto err_no_clk;
+ goto err_no_pdata;
}
/* setup any gpio we can */
@@ -615,7 +595,8 @@
goto err_register;
}
- err = gpio_request(pdata->pin_cs, dev_name(&pdev->dev));
+ err = devm_gpio_request(&pdev->dev, pdata->pin_cs,
+ dev_name(&pdev->dev));
if (err) {
dev_err(&pdev->dev, "Failed to get gpio for cs\n");
goto err_register;
@@ -639,27 +620,10 @@
return 0;
err_register:
- if (hw->set_cs == s3c24xx_spi_gpiocs)
- gpio_free(pdata->pin_cs);
-
clk_disable(hw->clk);
- clk_put(hw->clk);
- err_no_clk:
- free_irq(hw->irq, hw);
-
- err_no_irq:
- iounmap(hw->regs);
-
- err_no_iomap:
- release_resource(hw->ioarea);
- kfree(hw->ioarea);
-
- err_no_iores:
err_no_pdata:
spi_master_put(hw->master);
-
- err_nomem:
return err;
}
@@ -668,19 +632,7 @@
struct s3c24xx_spi *hw = platform_get_drvdata(dev);
spi_bitbang_stop(&hw->bitbang);
-
clk_disable(hw->clk);
- clk_put(hw->clk);
-
- free_irq(hw->irq, hw);
- iounmap(hw->regs);
-
- if (hw->set_cs == s3c24xx_spi_gpiocs)
- gpio_free(hw->pdata->pin_cs);
-
- release_resource(hw->ioarea);
- kfree(hw->ioarea);
-
spi_master_put(hw->master);
return 0;
}
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 4c4b0a1..ae907dd 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -890,7 +890,7 @@
unsigned long flags;
int use_dma;
- reinit_completion(&sdd->xfer_completion);
+ reinit_completion(&sdd->xfer_completion);
/* Only BPW and Speed may change across transfers */
bpw = xfer->bits_per_word;
@@ -927,9 +927,6 @@
/* Start the signals */
writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
- /* Start the signals */
- writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
-
spin_unlock_irqrestore(&sdd->lock, flags);
status = wait_for_xfer(sdd, xfer, use_dma);
diff --git a/drivers/spi/spi-sh.c b/drivers/spi/spi-sh.c
index 86a17d6..f6f2c70 100644
--- a/drivers/spi/spi-sh.c
+++ b/drivers/spi/spi-sh.c
@@ -171,7 +171,6 @@
int remain = t->len;
int cur_len;
unsigned char *data;
- unsigned long tmp;
long ret;
if (t->len)
@@ -213,9 +212,7 @@
}
if (list_is_last(&t->transfer_list, &mesg->transfers)) {
- tmp = spi_sh_read(ss, SPI_SH_CR1);
- tmp = tmp & ~(SPI_SH_SSD | SPI_SH_SSDB);
- spi_sh_write(ss, tmp, SPI_SH_CR1);
+ spi_sh_clear_bit(ss, SPI_SH_SSD | SPI_SH_SSDB, SPI_SH_CR1);
spi_sh_set_bit(ss, SPI_SH_SSA, SPI_SH_CR1);
ss->cr1 &= ~SPI_SH_TBE;
@@ -239,7 +236,6 @@
int remain = t->len;
int cur_len;
unsigned char *data;
- unsigned long tmp;
long ret;
if (t->len > SPI_SH_MAX_BYTE)
@@ -247,9 +243,7 @@
else
spi_sh_write(ss, t->len, SPI_SH_CR3);
- tmp = spi_sh_read(ss, SPI_SH_CR1);
- tmp = tmp & ~(SPI_SH_SSD | SPI_SH_SSDB);
- spi_sh_write(ss, tmp, SPI_SH_CR1);
+ spi_sh_clear_bit(ss, SPI_SH_SSD | SPI_SH_SSDB, SPI_SH_CR1);
spi_sh_set_bit(ss, SPI_SH_SSA, SPI_SH_CR1);
spi_sh_wait_write_buffer_empty(ss);
diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c
index aaecfb3..47b93cc 100644
--- a/drivers/spi/spi-tegra114.c
+++ b/drivers/spi/spi-tegra114.c
@@ -54,11 +54,8 @@
#define SPI_CS_SS_VAL (1 << 20)
#define SPI_CS_SW_HW (1 << 21)
/* SPI_CS_POL_INACTIVE bits are default high */
-#define SPI_CS_POL_INACTIVE 22
-#define SPI_CS_POL_INACTIVE_0 (1 << 22)
-#define SPI_CS_POL_INACTIVE_1 (1 << 23)
-#define SPI_CS_POL_INACTIVE_2 (1 << 24)
-#define SPI_CS_POL_INACTIVE_3 (1 << 25)
+ /* n from 0 to 3 */
+#define SPI_CS_POL_INACTIVE(n) (1 << (22 + (n)))
#define SPI_CS_POL_INACTIVE_MASK (0xF << 22)
#define SPI_CS_SEL_0 (0 << 26)
@@ -165,9 +162,6 @@
#define MAX_HOLD_CYCLES 16
#define SPI_DEFAULT_SPEED 25000000
-#define MAX_CHIP_SELECT 4
-#define SPI_FIFO_DEPTH 64
-
struct tegra_spi_data {
struct device *dev;
struct spi_master *master;
@@ -184,7 +178,6 @@
struct spi_device *cur_spi;
struct spi_device *cs_control;
unsigned cur_pos;
- unsigned cur_len;
unsigned words_per_32bit;
unsigned bytes_per_word;
unsigned curr_dma_words;
@@ -204,12 +197,10 @@
u32 rx_status;
u32 status_reg;
bool is_packed;
- unsigned long packed_size;
u32 command1_reg;
u32 dma_control_reg;
u32 def_command1_reg;
- u32 spi_cs_timing;
struct completion xfer_completion;
struct spi_transfer *curr_xfer;
@@ -227,14 +218,14 @@
static int tegra_spi_runtime_suspend(struct device *dev);
static int tegra_spi_runtime_resume(struct device *dev);
-static inline unsigned long tegra_spi_readl(struct tegra_spi_data *tspi,
+static inline u32 tegra_spi_readl(struct tegra_spi_data *tspi,
unsigned long reg)
{
return readl(tspi->base + reg);
}
static inline void tegra_spi_writel(struct tegra_spi_data *tspi,
- unsigned long val, unsigned long reg)
+ u32 val, unsigned long reg)
{
writel(val, tspi->base + reg);
@@ -245,7 +236,7 @@
static void tegra_spi_clear_status(struct tegra_spi_data *tspi)
{
- unsigned long val;
+ u32 val;
/* Write 1 to clear status register */
val = tegra_spi_readl(tspi, SPI_TRANS_STATUS);
@@ -296,10 +287,9 @@
{
unsigned nbytes;
unsigned tx_empty_count;
- unsigned long fifo_status;
+ u32 fifo_status;
unsigned max_n_32bit;
unsigned i, count;
- unsigned long x;
unsigned int written_words;
unsigned fifo_words_left;
u8 *tx_buf = (u8 *)t->tx_buf + tspi->cur_tx_pos;
@@ -313,9 +303,9 @@
nbytes = written_words * tspi->bytes_per_word;
max_n_32bit = DIV_ROUND_UP(nbytes, 4);
for (count = 0; count < max_n_32bit; count++) {
- x = 0;
+ u32 x = 0;
for (i = 0; (i < 4) && nbytes; i++, nbytes--)
- x |= (*tx_buf++) << (i*8);
+ x |= (u32)(*tx_buf++) << (i * 8);
tegra_spi_writel(tspi, x, SPI_TX_FIFO);
}
} else {
@@ -323,10 +313,10 @@
written_words = max_n_32bit;
nbytes = written_words * tspi->bytes_per_word;
for (count = 0; count < max_n_32bit; count++) {
- x = 0;
+ u32 x = 0;
for (i = 0; nbytes && (i < tspi->bytes_per_word);
i++, nbytes--)
- x |= ((*tx_buf++) << i*8);
+ x |= (u32)(*tx_buf++) << (i * 8);
tegra_spi_writel(tspi, x, SPI_TX_FIFO);
}
}
@@ -338,9 +328,8 @@
struct tegra_spi_data *tspi, struct spi_transfer *t)
{
unsigned rx_full_count;
- unsigned long fifo_status;
+ u32 fifo_status;
unsigned i, count;
- unsigned long x;
unsigned int read_words = 0;
unsigned len;
u8 *rx_buf = (u8 *)t->rx_buf + tspi->cur_rx_pos;
@@ -350,20 +339,16 @@
if (tspi->is_packed) {
len = tspi->curr_dma_words * tspi->bytes_per_word;
for (count = 0; count < rx_full_count; count++) {
- x = tegra_spi_readl(tspi, SPI_RX_FIFO);
+ u32 x = tegra_spi_readl(tspi, SPI_RX_FIFO);
for (i = 0; len && (i < 4); i++, len--)
*rx_buf++ = (x >> i*8) & 0xFF;
}
tspi->cur_rx_pos += tspi->curr_dma_words * tspi->bytes_per_word;
read_words += tspi->curr_dma_words;
} else {
- unsigned int rx_mask;
- unsigned int bits_per_word = t->bits_per_word;
-
- rx_mask = (1 << bits_per_word) - 1;
+ u32 rx_mask = ((u32)1 << t->bits_per_word) - 1;
for (count = 0; count < rx_full_count; count++) {
- x = tegra_spi_readl(tspi, SPI_RX_FIFO);
- x &= rx_mask;
+ u32 x = tegra_spi_readl(tspi, SPI_RX_FIFO) & rx_mask;
for (i = 0; (i < tspi->bytes_per_word); i++)
*rx_buf++ = (x >> (i*8)) & 0xFF;
}
@@ -376,27 +361,24 @@
static void tegra_spi_copy_client_txbuf_to_spi_txbuf(
struct tegra_spi_data *tspi, struct spi_transfer *t)
{
- unsigned len;
-
/* Make the dma buffer to read by cpu */
dma_sync_single_for_cpu(tspi->dev, tspi->tx_dma_phys,
tspi->dma_buf_size, DMA_TO_DEVICE);
if (tspi->is_packed) {
- len = tspi->curr_dma_words * tspi->bytes_per_word;
+ unsigned len = tspi->curr_dma_words * tspi->bytes_per_word;
memcpy(tspi->tx_dma_buf, t->tx_buf + tspi->cur_pos, len);
} else {
unsigned int i;
unsigned int count;
u8 *tx_buf = (u8 *)t->tx_buf + tspi->cur_tx_pos;
unsigned consume = tspi->curr_dma_words * tspi->bytes_per_word;
- unsigned int x;
for (count = 0; count < tspi->curr_dma_words; count++) {
- x = 0;
+ u32 x = 0;
for (i = 0; consume && (i < tspi->bytes_per_word);
i++, consume--)
- x |= ((*tx_buf++) << i * 8);
+ x |= (u32)(*tx_buf++) << (i * 8);
tspi->tx_dma_buf[count] = x;
}
}
@@ -410,27 +392,21 @@
static void tegra_spi_copy_spi_rxbuf_to_client_rxbuf(
struct tegra_spi_data *tspi, struct spi_transfer *t)
{
- unsigned len;
-
/* Make the dma buffer to read by cpu */
dma_sync_single_for_cpu(tspi->dev, tspi->rx_dma_phys,
tspi->dma_buf_size, DMA_FROM_DEVICE);
if (tspi->is_packed) {
- len = tspi->curr_dma_words * tspi->bytes_per_word;
+ unsigned len = tspi->curr_dma_words * tspi->bytes_per_word;
memcpy(t->rx_buf + tspi->cur_rx_pos, tspi->rx_dma_buf, len);
} else {
unsigned int i;
unsigned int count;
unsigned char *rx_buf = t->rx_buf + tspi->cur_rx_pos;
- unsigned int x;
- unsigned int rx_mask;
- unsigned int bits_per_word = t->bits_per_word;
+ u32 rx_mask = ((u32)1 << t->bits_per_word) - 1;
- rx_mask = (1 << bits_per_word) - 1;
for (count = 0; count < tspi->curr_dma_words; count++) {
- x = tspi->rx_dma_buf[count];
- x &= rx_mask;
+ u32 x = tspi->rx_dma_buf[count] & rx_mask;
for (i = 0; (i < tspi->bytes_per_word); i++)
*rx_buf++ = (x >> (i*8)) & 0xFF;
}
@@ -490,16 +466,16 @@
static int tegra_spi_start_dma_based_transfer(
struct tegra_spi_data *tspi, struct spi_transfer *t)
{
- unsigned long val;
+ u32 val;
unsigned int len;
int ret = 0;
- unsigned long status;
+ u32 status;
/* Make sure that Rx and Tx fifo are empty */
status = tegra_spi_readl(tspi, SPI_FIFO_STATUS);
if ((status & SPI_FIFO_EMPTY) != SPI_FIFO_EMPTY) {
- dev_err(tspi->dev,
- "Rx/Tx fifo are not empty status 0x%08lx\n", status);
+ dev_err(tspi->dev, "Rx/Tx fifo are not empty status 0x%08x\n",
+ (unsigned)status);
return -EIO;
}
@@ -564,7 +540,7 @@
static int tegra_spi_start_cpu_based_transfer(
struct tegra_spi_data *tspi, struct spi_transfer *t)
{
- unsigned long val;
+ u32 val;
unsigned cur_words;
if (tspi->cur_direction & DATA_DIR_TX)
@@ -677,13 +653,13 @@
dma_release_channel(dma_chan);
}
-static unsigned long tegra_spi_setup_transfer_one(struct spi_device *spi,
+static u32 tegra_spi_setup_transfer_one(struct spi_device *spi,
struct spi_transfer *t, bool is_first_of_msg)
{
struct tegra_spi_data *tspi = spi_master_get_devdata(spi->master);
u32 speed = t->speed_hz;
u8 bits_per_word = t->bits_per_word;
- unsigned long command1;
+ u32 command1;
int req_mode;
if (speed != tspi->cur_speed) {
@@ -738,7 +714,7 @@
}
static int tegra_spi_start_transfer_one(struct spi_device *spi,
- struct spi_transfer *t, unsigned long command1)
+ struct spi_transfer *t, u32 command1)
{
struct tegra_spi_data *tspi = spi_master_get_devdata(spi->master);
unsigned total_fifo_words;
@@ -763,8 +739,8 @@
tegra_spi_writel(tspi, command1, SPI_COMMAND1);
tspi->command1_reg = command1;
- dev_dbg(tspi->dev, "The def 0x%x and written 0x%lx\n",
- tspi->def_command1_reg, command1);
+ dev_dbg(tspi->dev, "The def 0x%x and written 0x%x\n",
+ tspi->def_command1_reg, (unsigned)command1);
if (total_fifo_words > SPI_FIFO_DEPTH)
ret = tegra_spi_start_dma_based_transfer(tspi, t);
@@ -776,15 +752,9 @@
static int tegra_spi_setup(struct spi_device *spi)
{
struct tegra_spi_data *tspi = spi_master_get_devdata(spi->master);
- unsigned long val;
+ u32 val;
unsigned long flags;
int ret;
- unsigned int cs_pol_bit[MAX_CHIP_SELECT] = {
- SPI_CS_POL_INACTIVE_0,
- SPI_CS_POL_INACTIVE_1,
- SPI_CS_POL_INACTIVE_2,
- SPI_CS_POL_INACTIVE_3,
- };
dev_dbg(&spi->dev, "setup %d bpw, %scpol, %scpha, %dHz\n",
spi->bits_per_word,
@@ -806,9 +776,9 @@
spin_lock_irqsave(&tspi->lock, flags);
val = tspi->def_command1_reg;
if (spi->mode & SPI_CS_HIGH)
- val &= ~cs_pol_bit[spi->chip_select];
+ val &= ~SPI_CS_POL_INACTIVE(spi->chip_select);
else
- val |= cs_pol_bit[spi->chip_select];
+ val |= SPI_CS_POL_INACTIVE(spi->chip_select);
tspi->def_command1_reg = val;
tegra_spi_writel(tspi, tspi->def_command1_reg, SPI_COMMAND1);
spin_unlock_irqrestore(&tspi->lock, flags);
@@ -842,7 +812,7 @@
msg->actual_length = 0;
list_for_each_entry(xfer, &msg->transfers, transfer_list) {
- unsigned long cmd1;
+ u32 cmd1;
reinit_completion(&tspi->xfer_completion);
diff --git a/drivers/spi/spi-tegra20-sflash.c b/drivers/spi/spi-tegra20-sflash.c
index 4dc8e81..af78c17 100644
--- a/drivers/spi/spi-tegra20-sflash.c
+++ b/drivers/spi/spi-tegra20-sflash.c
@@ -148,14 +148,14 @@
static int tegra_sflash_runtime_suspend(struct device *dev);
static int tegra_sflash_runtime_resume(struct device *dev);
-static inline unsigned long tegra_sflash_readl(struct tegra_sflash_data *tsd,
+static inline u32 tegra_sflash_readl(struct tegra_sflash_data *tsd,
unsigned long reg)
{
return readl(tsd->base + reg);
}
static inline void tegra_sflash_writel(struct tegra_sflash_data *tsd,
- unsigned long val, unsigned long reg)
+ u32 val, unsigned long reg)
{
writel(val, tsd->base + reg);
}
@@ -185,7 +185,7 @@
struct tegra_sflash_data *tsd, struct spi_transfer *t)
{
unsigned nbytes;
- unsigned long status;
+ u32 status;
unsigned max_n_32bit = tsd->curr_xfer_words;
u8 *tx_buf = (u8 *)t->tx_buf + tsd->cur_tx_pos;
@@ -196,11 +196,11 @@
status = tegra_sflash_readl(tsd, SPI_STATUS);
while (!(status & SPI_TXF_FULL)) {
int i;
- unsigned int x = 0;
+ u32 x = 0;
for (i = 0; nbytes && (i < tsd->bytes_per_word);
i++, nbytes--)
- x |= ((*tx_buf++) << i*8);
+ x |= (u32)(*tx_buf++) << (i * 8);
tegra_sflash_writel(tsd, x, SPI_TX_FIFO);
if (!nbytes)
break;
@@ -214,16 +214,14 @@
static int tegra_sflash_read_rx_fifo_to_client_rxbuf(
struct tegra_sflash_data *tsd, struct spi_transfer *t)
{
- unsigned long status;
+ u32 status;
unsigned int read_words = 0;
u8 *rx_buf = (u8 *)t->rx_buf + tsd->cur_rx_pos;
status = tegra_sflash_readl(tsd, SPI_STATUS);
while (!(status & SPI_RXF_EMPTY)) {
int i;
- unsigned long x;
-
- x = tegra_sflash_readl(tsd, SPI_RX_FIFO);
+ u32 x = tegra_sflash_readl(tsd, SPI_RX_FIFO);
for (i = 0; (i < tsd->bytes_per_word); i++)
*rx_buf++ = (x >> (i*8)) & 0xFF;
read_words++;
@@ -236,7 +234,7 @@
static int tegra_sflash_start_cpu_based_transfer(
struct tegra_sflash_data *tsd, struct spi_transfer *t)
{
- unsigned long val = 0;
+ u32 val = 0;
unsigned cur_words;
if (tsd->cur_direction & DATA_DIR_TX)
@@ -266,7 +264,7 @@
{
struct tegra_sflash_data *tsd = spi_master_get_devdata(spi->master);
u32 speed;
- unsigned long command;
+ u32 command;
speed = t->speed_hz;
if (speed != tsd->cur_speed) {
@@ -313,7 +311,7 @@
tegra_sflash_writel(tsd, command, SPI_COMMAND);
tsd->command_reg = command;
- return tegra_sflash_start_cpu_based_transfer(tsd, t);
+ return tegra_sflash_start_cpu_based_transfer(tsd, t);
}
static int tegra_sflash_setup(struct spi_device *spi)
diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index e66715b..3ce1de8 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -196,7 +196,7 @@
u32 rx_status;
u32 status_reg;
bool is_packed;
- unsigned long packed_size;
+ u32 packed_size;
u32 command_reg;
u32 command2_reg;
@@ -220,14 +220,14 @@
static int tegra_slink_runtime_suspend(struct device *dev);
static int tegra_slink_runtime_resume(struct device *dev);
-static inline unsigned long tegra_slink_readl(struct tegra_slink_data *tspi,
+static inline u32 tegra_slink_readl(struct tegra_slink_data *tspi,
unsigned long reg)
{
return readl(tspi->base + reg);
}
static inline void tegra_slink_writel(struct tegra_slink_data *tspi,
- unsigned long val, unsigned long reg)
+ u32 val, unsigned long reg)
{
writel(val, tspi->base + reg);
@@ -238,38 +238,30 @@
static void tegra_slink_clear_status(struct tegra_slink_data *tspi)
{
- unsigned long val;
- unsigned long val_write = 0;
+ u32 val_write;
- val = tegra_slink_readl(tspi, SLINK_STATUS);
+ tegra_slink_readl(tspi, SLINK_STATUS);
/* Write 1 to clear status register */
val_write = SLINK_RDY | SLINK_FIFO_ERROR;
tegra_slink_writel(tspi, val_write, SLINK_STATUS);
}
-static unsigned long tegra_slink_get_packed_size(struct tegra_slink_data *tspi,
+static u32 tegra_slink_get_packed_size(struct tegra_slink_data *tspi,
struct spi_transfer *t)
{
- unsigned long val;
-
switch (tspi->bytes_per_word) {
case 0:
- val = SLINK_PACK_SIZE_4;
- break;
+ return SLINK_PACK_SIZE_4;
case 1:
- val = SLINK_PACK_SIZE_8;
- break;
+ return SLINK_PACK_SIZE_8;
case 2:
- val = SLINK_PACK_SIZE_16;
- break;
+ return SLINK_PACK_SIZE_16;
case 4:
- val = SLINK_PACK_SIZE_32;
- break;
+ return SLINK_PACK_SIZE_32;
default:
- val = 0;
+ return 0;
}
- return val;
}
static unsigned tegra_slink_calculate_curr_xfer_param(
@@ -312,10 +304,9 @@
{
unsigned nbytes;
unsigned tx_empty_count;
- unsigned long fifo_status;
+ u32 fifo_status;
unsigned max_n_32bit;
unsigned i, count;
- unsigned long x;
unsigned int written_words;
unsigned fifo_words_left;
u8 *tx_buf = (u8 *)t->tx_buf + tspi->cur_tx_pos;
@@ -329,9 +320,9 @@
nbytes = written_words * tspi->bytes_per_word;
max_n_32bit = DIV_ROUND_UP(nbytes, 4);
for (count = 0; count < max_n_32bit; count++) {
- x = 0;
+ u32 x = 0;
for (i = 0; (i < 4) && nbytes; i++, nbytes--)
- x |= (*tx_buf++) << (i*8);
+ x |= (u32)(*tx_buf++) << (i * 8);
tegra_slink_writel(tspi, x, SLINK_TX_FIFO);
}
} else {
@@ -339,10 +330,10 @@
written_words = max_n_32bit;
nbytes = written_words * tspi->bytes_per_word;
for (count = 0; count < max_n_32bit; count++) {
- x = 0;
+ u32 x = 0;
for (i = 0; nbytes && (i < tspi->bytes_per_word);
i++, nbytes--)
- x |= ((*tx_buf++) << i*8);
+ x |= (u32)(*tx_buf++) << (i * 8);
tegra_slink_writel(tspi, x, SLINK_TX_FIFO);
}
}
@@ -354,9 +345,8 @@
struct tegra_slink_data *tspi, struct spi_transfer *t)
{
unsigned rx_full_count;
- unsigned long fifo_status;
+ u32 fifo_status;
unsigned i, count;
- unsigned long x;
unsigned int read_words = 0;
unsigned len;
u8 *rx_buf = (u8 *)t->rx_buf + tspi->cur_rx_pos;
@@ -366,7 +356,7 @@
if (tspi->is_packed) {
len = tspi->curr_dma_words * tspi->bytes_per_word;
for (count = 0; count < rx_full_count; count++) {
- x = tegra_slink_readl(tspi, SLINK_RX_FIFO);
+ u32 x = tegra_slink_readl(tspi, SLINK_RX_FIFO);
for (i = 0; len && (i < 4); i++, len--)
*rx_buf++ = (x >> i*8) & 0xFF;
}
@@ -374,7 +364,7 @@
read_words += tspi->curr_dma_words;
} else {
for (count = 0; count < rx_full_count; count++) {
- x = tegra_slink_readl(tspi, SLINK_RX_FIFO);
+ u32 x = tegra_slink_readl(tspi, SLINK_RX_FIFO);
for (i = 0; (i < tspi->bytes_per_word); i++)
*rx_buf++ = (x >> (i*8)) & 0xFF;
}
@@ -387,27 +377,24 @@
static void tegra_slink_copy_client_txbuf_to_spi_txbuf(
struct tegra_slink_data *tspi, struct spi_transfer *t)
{
- unsigned len;
-
/* Make the dma buffer to read by cpu */
dma_sync_single_for_cpu(tspi->dev, tspi->tx_dma_phys,
tspi->dma_buf_size, DMA_TO_DEVICE);
if (tspi->is_packed) {
- len = tspi->curr_dma_words * tspi->bytes_per_word;
+ unsigned len = tspi->curr_dma_words * tspi->bytes_per_word;
memcpy(tspi->tx_dma_buf, t->tx_buf + tspi->cur_pos, len);
} else {
unsigned int i;
unsigned int count;
u8 *tx_buf = (u8 *)t->tx_buf + tspi->cur_tx_pos;
unsigned consume = tspi->curr_dma_words * tspi->bytes_per_word;
- unsigned int x;
for (count = 0; count < tspi->curr_dma_words; count++) {
- x = 0;
+ u32 x = 0;
for (i = 0; consume && (i < tspi->bytes_per_word);
i++, consume--)
- x |= ((*tx_buf++) << i * 8);
+ x |= (u32)(*tx_buf++) << (i * 8);
tspi->tx_dma_buf[count] = x;
}
}
@@ -434,14 +421,10 @@
unsigned int i;
unsigned int count;
unsigned char *rx_buf = t->rx_buf + tspi->cur_rx_pos;
- unsigned int x;
- unsigned int rx_mask, bits_per_word;
+ u32 rx_mask = ((u32)1 << t->bits_per_word) - 1;
- bits_per_word = t->bits_per_word;
- rx_mask = (1 << bits_per_word) - 1;
for (count = 0; count < tspi->curr_dma_words; count++) {
- x = tspi->rx_dma_buf[count];
- x &= rx_mask;
+ u32 x = tspi->rx_dma_buf[count] & rx_mask;
for (i = 0; (i < tspi->bytes_per_word); i++)
*rx_buf++ = (x >> (i*8)) & 0xFF;
}
@@ -501,17 +484,16 @@
static int tegra_slink_start_dma_based_transfer(
struct tegra_slink_data *tspi, struct spi_transfer *t)
{
- unsigned long val;
- unsigned long test_val;
+ u32 val;
unsigned int len;
int ret = 0;
- unsigned long status;
+ u32 status;
/* Make sure that Rx and Tx fifo are empty */
status = tegra_slink_readl(tspi, SLINK_STATUS);
if ((status & SLINK_FIFO_EMPTY) != SLINK_FIFO_EMPTY) {
- dev_err(tspi->dev,
- "Rx/Tx fifo are not empty status 0x%08lx\n", status);
+ dev_err(tspi->dev, "Rx/Tx fifo are not empty status 0x%08x\n",
+ (unsigned)status);
return -EIO;
}
@@ -551,9 +533,9 @@
}
/* Wait for tx fifo to be fill before starting slink */
- test_val = tegra_slink_readl(tspi, SLINK_STATUS);
- while (!(test_val & SLINK_TX_FULL))
- test_val = tegra_slink_readl(tspi, SLINK_STATUS);
+ status = tegra_slink_readl(tspi, SLINK_STATUS);
+ while (!(status & SLINK_TX_FULL))
+ status = tegra_slink_readl(tspi, SLINK_STATUS);
}
if (tspi->cur_direction & DATA_DIR_RX) {
@@ -587,7 +569,7 @@
static int tegra_slink_start_cpu_based_transfer(
struct tegra_slink_data *tspi, struct spi_transfer *t)
{
- unsigned long val;
+ u32 val;
unsigned cur_words;
val = tspi->packed_size;
@@ -714,8 +696,8 @@
u8 bits_per_word;
unsigned total_fifo_words;
int ret;
- unsigned long command;
- unsigned long command2;
+ u32 command;
+ u32 command2;
bits_per_word = t->bits_per_word;
speed = t->speed_hz;
@@ -762,17 +744,18 @@
static int tegra_slink_setup(struct spi_device *spi)
{
- struct tegra_slink_data *tspi = spi_master_get_devdata(spi->master);
- unsigned long val;
- unsigned long flags;
- int ret;
- unsigned int cs_pol_bit[MAX_CHIP_SELECT] = {
+ static const u32 cs_pol_bit[MAX_CHIP_SELECT] = {
SLINK_CS_POLARITY,
SLINK_CS_POLARITY1,
SLINK_CS_POLARITY2,
SLINK_CS_POLARITY3,
};
+ struct tegra_slink_data *tspi = spi_master_get_devdata(spi->master);
+ u32 val;
+ unsigned long flags;
+ int ret;
+
dev_dbg(&spi->dev, "setup %d bpw, %scpol, %scpha, %dHz\n",
spi->bits_per_word,
spi->mode & SPI_CPOL ? "" : "~",
diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index 286cf8d..3d09265 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -46,6 +46,8 @@
struct spi_master *master;
void __iomem *base;
+ void __iomem *ctrl_base;
+ void __iomem *mmap_base;
struct clk *fclk;
struct device *dev;
@@ -54,6 +56,8 @@
u32 spi_max_frequency;
u32 cmd;
u32 dc;
+
+ bool ctrl_mod;
};
#define QSPI_PID (0x0)
@@ -204,53 +208,36 @@
txbuf = t->tx_buf;
cmd = qspi->cmd | QSPI_WR_SNGL;
count = t->len;
- wlen = t->bits_per_word;
+ wlen = t->bits_per_word >> 3; /* in bytes */
while (count) {
switch (wlen) {
- case 8:
+ case 1:
dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %02x\n",
cmd, qspi->dc, *txbuf);
writeb(*txbuf, qspi->base + QSPI_SPI_DATA_REG);
- ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG);
- ret = wait_for_completion_timeout(&qspi->transfer_complete,
- QSPI_COMPLETION_TIMEOUT);
- if (ret == 0) {
- dev_err(qspi->dev, "write timed out\n");
- return -ETIMEDOUT;
- }
- txbuf += 1;
- count -= 1;
break;
- case 16:
+ case 2:
dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %04x\n",
cmd, qspi->dc, *txbuf);
writew(*((u16 *)txbuf), qspi->base + QSPI_SPI_DATA_REG);
- ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG);
- ret = wait_for_completion_timeout(&qspi->transfer_complete,
- QSPI_COMPLETION_TIMEOUT);
- if (ret == 0) {
- dev_err(qspi->dev, "write timed out\n");
- return -ETIMEDOUT;
- }
- txbuf += 2;
- count -= 2;
break;
- case 32:
+ case 4:
dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %08x\n",
cmd, qspi->dc, *txbuf);
writel(*((u32 *)txbuf), qspi->base + QSPI_SPI_DATA_REG);
- ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG);
- ret = wait_for_completion_timeout(&qspi->transfer_complete,
- QSPI_COMPLETION_TIMEOUT);
- if (ret == 0) {
- dev_err(qspi->dev, "write timed out\n");
- return -ETIMEDOUT;
- }
- txbuf += 4;
- count -= 4;
break;
}
+
+ ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG);
+ ret = wait_for_completion_timeout(&qspi->transfer_complete,
+ QSPI_COMPLETION_TIMEOUT);
+ if (ret == 0) {
+ dev_err(qspi->dev, "write timed out\n");
+ return -ETIMEDOUT;
+ }
+ txbuf += wlen;
+ count -= wlen;
}
return 0;
@@ -276,7 +263,7 @@
break;
}
count = t->len;
- wlen = t->bits_per_word;
+ wlen = t->bits_per_word >> 3; /* in bytes */
while (count) {
dev_dbg(qspi->dev, "rx cmd %08x dc %08x\n", cmd, qspi->dc);
@@ -288,22 +275,18 @@
return -ETIMEDOUT;
}
switch (wlen) {
- case 8:
+ case 1:
*rxbuf = readb(qspi->base + QSPI_SPI_DATA_REG);
- rxbuf += 1;
- count -= 1;
break;
- case 16:
+ case 2:
*((u16 *)rxbuf) = readw(qspi->base + QSPI_SPI_DATA_REG);
- rxbuf += 2;
- count -= 2;
break;
- case 32:
+ case 4:
*((u32 *)rxbuf) = readl(qspi->base + QSPI_SPI_DATA_REG);
- rxbuf += 4;
- count -= 4;
break;
}
+ rxbuf += wlen;
+ count -= wlen;
}
return 0;
@@ -435,7 +418,7 @@
{
struct ti_qspi *qspi;
struct spi_master *master;
- struct resource *r;
+ struct resource *r, *res_ctrl, *res_mmap;
struct device_node *np = pdev->dev.of_node;
u32 max_freq;
int ret = 0, num_cs, irq;
@@ -462,7 +445,35 @@
qspi->dev = &pdev->dev;
platform_set_drvdata(pdev, qspi);
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "qspi_base");
+ if (r == NULL) {
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "missing platform data\n");
+ return -ENODEV;
+ }
+ }
+
+ res_mmap = platform_get_resource_byname(pdev,
+ IORESOURCE_MEM, "qspi_mmap");
+ if (res_mmap == NULL) {
+ res_mmap = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (res_mmap == NULL) {
+ dev_err(&pdev->dev,
+ "memory mapped resource not required\n");
+ return -ENODEV;
+ }
+ }
+
+ res_ctrl = platform_get_resource_byname(pdev,
+ IORESOURCE_MEM, "qspi_ctrlmod");
+ if (res_ctrl == NULL) {
+ res_ctrl = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+ if (res_ctrl == NULL) {
+ dev_dbg(&pdev->dev,
+ "control module resources not required\n");
+ }
+ }
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
@@ -478,6 +489,23 @@
goto free_master;
}
+ if (res_ctrl) {
+ qspi->ctrl_mod = true;
+ qspi->ctrl_base = devm_ioremap_resource(&pdev->dev, res_ctrl);
+ if (IS_ERR(qspi->ctrl_base)) {
+ ret = PTR_ERR(qspi->ctrl_base);
+ goto free_master;
+ }
+ }
+
+ if (res_mmap) {
+ qspi->mmap_base = devm_ioremap_resource(&pdev->dev, res_mmap);
+ if (IS_ERR(qspi->mmap_base)) {
+ ret = PTR_ERR(qspi->mmap_base);
+ goto free_master;
+ }
+ }
+
ret = devm_request_irq(&pdev->dev, irq, ti_qspi_isr, 0,
dev_name(&pdev->dev), qspi);
if (ret < 0) {
@@ -539,7 +567,7 @@
.probe = ti_qspi_probe,
.remove = ti_qspi_remove,
.driver = {
- .name = "ti,dra7xxx-qspi",
+ .name = "ti-qspi",
.owner = THIS_MODULE,
.pm = &ti_qspi_pm_ops,
.of_match_table = ti_qspi_match,
@@ -551,3 +579,4 @@
MODULE_AUTHOR("Sourav Poddar <sourav.poddar@ti.com>");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("TI QSPI controller driver");
+MODULE_ALIAS("platform:ti-qspi");
diff --git a/drivers/spi/spi-txx9.c b/drivers/spi/spi-txx9.c
index 18c9bb2..6191ced 100644
--- a/drivers/spi/spi-txx9.c
+++ b/drivers/spi/spi-txx9.c
@@ -348,7 +348,7 @@
INIT_LIST_HEAD(&c->queue);
init_waitqueue_head(&c->waitq);
- c->clk = clk_get(&dev->dev, "spi-baseclk");
+ c->clk = devm_clk_get(&dev->dev, "spi-baseclk");
if (IS_ERR(c->clk)) {
ret = PTR_ERR(c->clk);
c->clk = NULL;
@@ -356,7 +356,6 @@
}
ret = clk_enable(c->clk);
if (ret) {
- clk_put(c->clk);
c->clk = NULL;
goto exit;
}
@@ -415,10 +414,8 @@
exit:
if (c->workqueue)
destroy_workqueue(c->workqueue);
- if (c->clk) {
+ if (c->clk)
clk_disable(c->clk);
- clk_put(c->clk);
- }
spi_master_put(master);
return ret;
}
@@ -430,7 +427,6 @@
destroy_workqueue(c->workqueue);
clk_disable(c->clk);
- clk_put(c->clk);
return 0;
}
diff --git a/drivers/spi/spi-xcomm.c b/drivers/spi/spi-xcomm.c
index 4258c71..24c40b1 100644
--- a/drivers/spi/spi-xcomm.c
+++ b/drivers/spi/spi-xcomm.c
@@ -231,22 +231,13 @@
master->dev.of_node = i2c->dev.of_node;
i2c_set_clientdata(i2c, master);
- ret = spi_register_master(master);
+ ret = devm_spi_register_master(&i2c->dev, master);
if (ret < 0)
spi_master_put(master);
return ret;
}
-static int spi_xcomm_remove(struct i2c_client *i2c)
-{
- struct spi_master *master = i2c_get_clientdata(i2c);
-
- spi_unregister_master(master);
-
- return 0;
-}
-
static const struct i2c_device_id spi_xcomm_ids[] = {
{ "spi-xcomm" },
{ },
@@ -259,7 +250,6 @@
},
.id_table = spi_xcomm_ids,
.probe = spi_xcomm_probe,
- .remove = spi_xcomm_remove,
};
module_i2c_driver(spi_xcomm_driver);
diff --git a/include/linux/spi/s3c24xx.h b/include/linux/spi/s3c24xx.h
index c23b923..ca271c06 100644
--- a/include/linux/spi/s3c24xx.h
+++ b/include/linux/spi/s3c24xx.h
@@ -23,4 +23,6 @@
void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
};
+extern int s3c24xx_set_fiq(unsigned int irq, bool on);
+
#endif /* __LINUX_SPI_S3C24XX_H */
