| /* |
| * IgorPlug-USB IR Receiver |
| * |
| * Copyright (C) 2014 Sean Young <sean@mess.org> |
| * |
| * Supports the standard homebrew IgorPlugUSB receiver with Igor's firmware. |
| * See http://www.cesko.host.sk/IgorPlugUSB/IgorPlug-USB%20(AVR)_eng.htm |
| * |
| * Based on the lirc_igorplugusb.c driver: |
| * Copyright (C) 2004 Jan M. Hochstein |
| * <hochstein@algo.informatik.tu-darmstadt.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| #include <linux/device.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/usb.h> |
| #include <linux/usb/input.h> |
| #include <media/rc-core.h> |
| |
| #define DRIVER_DESC "IgorPlug-USB IR Receiver" |
| #define DRIVER_NAME "igorplugusb" |
| |
| #define HEADERLEN 3 |
| #define BUFLEN 36 |
| #define MAX_PACKET (HEADERLEN + BUFLEN) |
| |
| #define SET_INFRABUFFER_EMPTY 1 |
| #define GET_INFRACODE 2 |
| |
| |
| struct igorplugusb { |
| struct rc_dev *rc; |
| struct device *dev; |
| |
| struct urb *urb; |
| struct usb_ctrlrequest request; |
| |
| struct timer_list timer; |
| |
| uint8_t buf_in[MAX_PACKET]; |
| |
| char phys[64]; |
| }; |
| |
| static void igorplugusb_cmd(struct igorplugusb *ir, int cmd); |
| |
| static void igorplugusb_irdata(struct igorplugusb *ir, unsigned len) |
| { |
| DEFINE_IR_RAW_EVENT(rawir); |
| unsigned i, start, overflow; |
| |
| dev_dbg(ir->dev, "irdata: %*ph (len=%u)", len, ir->buf_in, len); |
| |
| /* |
| * If more than 36 pulses and spaces follow each other, the igorplugusb |
| * overwrites its buffer from the beginning. The overflow value is the |
| * last offset which was not overwritten. Everything from this offset |
| * onwards occurred before everything until this offset. |
| */ |
| overflow = ir->buf_in[2]; |
| i = start = overflow + HEADERLEN; |
| |
| if (start >= len) { |
| dev_err(ir->dev, "receive overflow invalid: %u", overflow); |
| } else { |
| if (overflow > 0) |
| dev_warn(ir->dev, "receive overflow, at least %u lost", |
| overflow); |
| |
| do { |
| rawir.duration = ir->buf_in[i] * 85333; |
| rawir.pulse = i & 1; |
| |
| ir_raw_event_store_with_filter(ir->rc, &rawir); |
| |
| if (++i == len) |
| i = HEADERLEN; |
| } while (i != start); |
| |
| /* add a trailing space */ |
| rawir.duration = ir->rc->timeout; |
| rawir.pulse = false; |
| ir_raw_event_store_with_filter(ir->rc, &rawir); |
| |
| ir_raw_event_handle(ir->rc); |
| } |
| |
| igorplugusb_cmd(ir, SET_INFRABUFFER_EMPTY); |
| } |
| |
| static void igorplugusb_callback(struct urb *urb) |
| { |
| struct usb_ctrlrequest *req; |
| struct igorplugusb *ir = urb->context; |
| |
| req = (struct usb_ctrlrequest *)urb->setup_packet; |
| |
| switch (urb->status) { |
| case 0: |
| if (req->bRequest == GET_INFRACODE && |
| urb->actual_length > HEADERLEN) |
| igorplugusb_irdata(ir, urb->actual_length); |
| else /* request IR */ |
| mod_timer(&ir->timer, jiffies + msecs_to_jiffies(50)); |
| break; |
| case -EPROTO: |
| case -ECONNRESET: |
| case -ENOENT: |
| case -ESHUTDOWN: |
| usb_unlink_urb(urb); |
| return; |
| default: |
| dev_warn(ir->dev, "Error: urb status = %d\n", urb->status); |
| igorplugusb_cmd(ir, SET_INFRABUFFER_EMPTY); |
| break; |
| } |
| } |
| |
| static void igorplugusb_cmd(struct igorplugusb *ir, int cmd) |
| { |
| int ret; |
| |
| ir->request.bRequest = cmd; |
| ir->urb->transfer_flags = 0; |
| ret = usb_submit_urb(ir->urb, GFP_ATOMIC); |
| if (ret) |
| dev_err(ir->dev, "submit urb failed: %d", ret); |
| } |
| |
| static void igorplugusb_timer(unsigned long data) |
| { |
| struct igorplugusb *ir = (struct igorplugusb *)data; |
| |
| igorplugusb_cmd(ir, GET_INFRACODE); |
| } |
| |
| static int igorplugusb_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| struct usb_device *udev; |
| struct usb_host_interface *idesc; |
| struct usb_endpoint_descriptor *ep; |
| struct igorplugusb *ir; |
| struct rc_dev *rc; |
| int ret = -ENOMEM; |
| |
| udev = interface_to_usbdev(intf); |
| idesc = intf->cur_altsetting; |
| |
| if (idesc->desc.bNumEndpoints != 1) { |
| dev_err(&intf->dev, "incorrect number of endpoints"); |
| return -ENODEV; |
| } |
| |
| ep = &idesc->endpoint[0].desc; |
| if (!usb_endpoint_dir_in(ep) || !usb_endpoint_xfer_control(ep)) { |
| dev_err(&intf->dev, "endpoint incorrect"); |
| return -ENODEV; |
| } |
| |
| ir = devm_kzalloc(&intf->dev, sizeof(*ir), GFP_KERNEL); |
| if (!ir) |
| return -ENOMEM; |
| |
| ir->dev = &intf->dev; |
| |
| setup_timer(&ir->timer, igorplugusb_timer, (unsigned long)ir); |
| |
| ir->request.bRequest = GET_INFRACODE; |
| ir->request.bRequestType = USB_TYPE_VENDOR | USB_DIR_IN; |
| ir->request.wLength = cpu_to_le16(sizeof(ir->buf_in)); |
| |
| ir->urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!ir->urb) |
| goto fail; |
| |
| usb_fill_control_urb(ir->urb, udev, |
| usb_rcvctrlpipe(udev, 0), (uint8_t *)&ir->request, |
| ir->buf_in, sizeof(ir->buf_in), igorplugusb_callback, ir); |
| |
| usb_make_path(udev, ir->phys, sizeof(ir->phys)); |
| |
| rc = rc_allocate_device(); |
| if (!rc) |
| goto fail; |
| |
| rc->input_name = DRIVER_DESC; |
| rc->input_phys = ir->phys; |
| usb_to_input_id(udev, &rc->input_id); |
| rc->dev.parent = &intf->dev; |
| rc->driver_type = RC_DRIVER_IR_RAW; |
| /* |
| * This device can only store 36 pulses + spaces, which is not enough |
| * for the NEC protocol and many others. |
| */ |
| rc->allowed_protocols = RC_BIT_ALL_IR_DECODER & ~(RC_BIT_NEC | |
| RC_BIT_NECX | RC_BIT_NEC32 | RC_BIT_RC6_6A_20 | |
| RC_BIT_RC6_6A_24 | RC_BIT_RC6_6A_32 | RC_BIT_RC6_MCE | |
| RC_BIT_SONY20 | RC_BIT_MCE_KBD | RC_BIT_SANYO); |
| |
| rc->priv = ir; |
| rc->driver_name = DRIVER_NAME; |
| rc->map_name = RC_MAP_HAUPPAUGE; |
| rc->timeout = MS_TO_NS(100); |
| rc->rx_resolution = 85333; |
| |
| ir->rc = rc; |
| ret = rc_register_device(rc); |
| if (ret) { |
| dev_err(&intf->dev, "failed to register rc device: %d", ret); |
| goto fail; |
| } |
| |
| usb_set_intfdata(intf, ir); |
| |
| igorplugusb_cmd(ir, SET_INFRABUFFER_EMPTY); |
| |
| return 0; |
| fail: |
| rc_free_device(ir->rc); |
| usb_free_urb(ir->urb); |
| del_timer(&ir->timer); |
| |
| return ret; |
| } |
| |
| static void igorplugusb_disconnect(struct usb_interface *intf) |
| { |
| struct igorplugusb *ir = usb_get_intfdata(intf); |
| |
| rc_unregister_device(ir->rc); |
| del_timer_sync(&ir->timer); |
| usb_set_intfdata(intf, NULL); |
| usb_kill_urb(ir->urb); |
| usb_free_urb(ir->urb); |
| } |
| |
| static struct usb_device_id igorplugusb_table[] = { |
| /* Igor Plug USB (Atmel's Manufact. ID) */ |
| { USB_DEVICE(0x03eb, 0x0002) }, |
| /* Fit PC2 Infrared Adapter */ |
| { USB_DEVICE(0x03eb, 0x21fe) }, |
| /* Terminating entry */ |
| { } |
| }; |
| |
| static struct usb_driver igorplugusb_driver = { |
| .name = DRIVER_NAME, |
| .probe = igorplugusb_probe, |
| .disconnect = igorplugusb_disconnect, |
| .id_table = igorplugusb_table |
| }; |
| |
| module_usb_driver(igorplugusb_driver); |
| |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_AUTHOR("Sean Young <sean@mess.org>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DEVICE_TABLE(usb, igorplugusb_table); |