=====================
BPF Type Format (BTF)
=====================

1. Introduction
***************

BTF (BPF Type Format) is the meta data format which
encodes the debug info related to BPF program/map.
The name BTF was used initially to describe
data types. The BTF was later extended to include
function info for defined subroutines, and line info
for source/line information.

The debug info is used for map pretty print, function
signature, etc. The function signature enables better
bpf program/function kernel symbol.
The line info helps generate
source annotated translated byte code, jited code
and verifier log.

The BTF specification contains two parts,
  * BTF kernel API
  * BTF ELF file format

The kernel API is the contract between
user space and kernel. The kernel verifies
the BTF info before using it.
The ELF file format is a user space contract
between ELF file and libbpf loader.

The type and string sections are part of the
BTF kernel API, describing the debug info
(mostly types related) referenced by the bpf program.
These two sections are discussed in
details in :ref:`BTF_Type_String`.

.. _BTF_Type_String:

2. BTF Type and String Encoding
*******************************

The file ``include/uapi/linux/btf.h`` provides high
level definition on how types/strings are encoded.

The beginning of data blob must be::

    struct btf_header {
        __u16   magic;
        __u8    version;
        __u8    flags;
        __u32   hdr_len;

        /* All offsets are in bytes relative to the end of this header */
        __u32   type_off;       /* offset of type section       */
        __u32   type_len;       /* length of type section       */
        __u32   str_off;        /* offset of string section     */
        __u32   str_len;        /* length of string section     */
    };

The magic is ``0xeB9F``, which has different encoding for big and little
endian system, and can be used to test whether BTF is generated for
big or little endian target.
The btf_header is designed to be extensible with hdr_len equal to
``sizeof(struct btf_header)`` when the data blob is generated.

2.1 String Encoding
===================

The first string in the string section must be a null string.
The rest of string table is a concatenation of other null-treminated
strings.

2.2 Type Encoding
=================

The type id ``0`` is reserved for ``void`` type.
The type section is parsed sequentially and the type id is assigned to
each recognized type starting from id ``1``.
Currently, the following types are supported::

    #define BTF_KIND_INT            1       /* Integer      */
    #define BTF_KIND_PTR            2       /* Pointer      */
    #define BTF_KIND_ARRAY          3       /* Array        */
    #define BTF_KIND_STRUCT         4       /* Struct       */
    #define BTF_KIND_UNION          5       /* Union        */
    #define BTF_KIND_ENUM           6       /* Enumeration  */
    #define BTF_KIND_FWD            7       /* Forward      */
    #define BTF_KIND_TYPEDEF        8       /* Typedef      */
    #define BTF_KIND_VOLATILE       9       /* Volatile     */
    #define BTF_KIND_CONST          10      /* Const        */
    #define BTF_KIND_RESTRICT       11      /* Restrict     */
    #define BTF_KIND_FUNC           12      /* Function     */
    #define BTF_KIND_FUNC_PROTO     13      /* Function Proto       */

Note that the type section encodes debug info, not just pure types.
``BTF_KIND_FUNC`` is not a type, and it represents a defined subprogram.

Each type contains the following common data::

    struct btf_type {
        __u32 name_off;
        /* "info" bits arrangement
         * bits  0-15: vlen (e.g. # of struct's members)
         * bits 16-23: unused
         * bits 24-27: kind (e.g. int, ptr, array...etc)
         * bits 28-30: unused
         * bit     31: kind_flag, currently used by
         *             struct, union and fwd
         */
        __u32 info;
        /* "size" is used by INT, ENUM, STRUCT and UNION.
         * "size" tells the size of the type it is describing.
         *
         * "type" is used by PTR, TYPEDEF, VOLATILE, CONST, RESTRICT,
         * FUNC and FUNC_PROTO.
         * "type" is a type_id referring to another type.
         */
        union {
                __u32 size;
                __u32 type;
        };
    };

For certain kinds, the common data are followed by kind specific data.
The ``name_off`` in ``struct btf_type`` specifies the offset in the string table.
The following details encoding of each kind.

2.2.1 BTF_KIND_INT
~~~~~~~~~~~~~~~~~~

``struct btf_type`` encoding requirement:
 * ``name_off``: any valid offset
 * ``info.kind_flag``: 0
 * ``info.kind``: BTF_KIND_INT
 * ``info.vlen``: 0
 * ``size``: the size of the int type in bytes.

``btf_type`` is followed by a ``u32`` with following bits arrangement::

  #define BTF_INT_ENCODING(VAL)   (((VAL) & 0x0f000000) >> 24)
  #define BTF_INT_OFFSET(VAL)     (((VAL  & 0x00ff0000)) >> 16)
  #define BTF_INT_BITS(VAL)       ((VAL)  & 0x000000ff)

The ``BTF_INT_ENCODING`` has the following attributes::

  #define BTF_INT_SIGNED  (1 << 0)
  #define BTF_INT_CHAR    (1 << 1)
  #define BTF_INT_BOOL    (1 << 2)

The ``BTF_INT_ENCODING()`` provides extra information, signness,
char, or bool, for the int type. The char and bool encoding
are mostly useful for pretty print. At most one encoding can
be specified for the int type.

The ``BTF_INT_BITS()`` specifies the number of actual bits held by
this int type. For example, a 4-bit bitfield encodes
``BTF_INT_BITS()`` equals to 4. The ``btf_type.size * 8``
must be equal to or greater than ``BTF_INT_BITS()`` for the type.
The maximum value of ``BTF_INT_BITS()`` is 128.

The ``BTF_INT_OFFSET()`` specifies the starting bit offset to
calculate values for this int. For example, a bitfield struct
member has

 * btf member bit offset 100 from the start of the structure,
 * btf member pointing to an int type,
 * the int type has ``BTF_INT_OFFSET() = 2`` and ``BTF_INT_BITS() = 4``

Then in the struct memory layout, this member will occupy
``4`` bits starting from bits ``100 + 2 = 102``.

Alternatively, the bitfield struct member can be the following to
access the same bits as the above:

 * btf member bit offset 102,
 * btf member pointing to an int type,
 * the int type has ``BTF_INT_OFFSET() = 0`` and ``BTF_INT_BITS() = 4``

The original intention of ``BTF_INT_OFFSET()`` is to provide
flexibility of bitfield encoding.
Currently, both llvm and pahole generates ``BTF_INT_OFFSET() = 0``
for all int types.

2.2.2 BTF_KIND_PTR
~~~~~~~~~~~~~~~~~~

``struct btf_type`` encoding requirement:
  * ``name_off``: 0
  * ``info.kind_flag``: 0
  * ``info.kind``: BTF_KIND_PTR
  * ``info.vlen``: 0
  * ``type``: the pointee type of the pointer

No additional type data follow ``btf_type``.

2.2.3 BTF_KIND_ARRAY
~~~~~~~~~~~~~~~~~~~~

``struct btf_type`` encoding requirement:
  * ``name_off``: 0
  * ``info.kind_flag``: 0
  * ``info.kind``: BTF_KIND_ARRAY
  * ``info.vlen``: 0
  * ``size/type``: 0, not used

btf_type is followed by one "struct btf_array"::

    struct btf_array {
        __u32   type;
        __u32   index_type;
        __u32   nelems;
    };

The ``struct btf_array`` encoding:
  * ``type``: the element type
  * ``index_type``: the index type
  * ``nelems``: the number of elements for this array (``0`` is also allowed).

The ``index_type`` can be any regular int types
(u8, u16, u32, u64, unsigned __int128).
The original design of including ``index_type`` follows dwarf
which has a ``index_type`` for its array type.
Currently in BTF, beyond type verification, the ``index_type`` is not used.

The ``struct btf_array`` allows chaining through element type to represent
multiple dimensional arrays. For example, ``int a[5][6]``, the following
type system illustrates the chaining:

  * [1]: int
  * [2]: array, ``btf_array.type = [1]``, ``btf_array.nelems = 6``
  * [3]: array, ``btf_array.type = [2]``, ``btf_array.nelems = 5``

Currently, both pahole and llvm collapse multiple dimensional array
into one dimensional array, e.g., ``a[5][6]``, the btf_array.nelems
equal to ``30``. This is because the original use case is map pretty
print where the whole array is dumped out so one dimensional array
is enough. As more BTF usage is explored, pahole and llvm can be
changed to generate proper chained representation for
multiple dimensional arrays.

2.2.4 BTF_KIND_STRUCT
~~~~~~~~~~~~~~~~~~~~~
2.2.5 BTF_KIND_UNION
~~~~~~~~~~~~~~~~~~~~

``struct btf_type`` encoding requirement:
  * ``name_off``: 0 or offset to a valid C identifier
  * ``info.kind_flag``: 0 or 1
  * ``info.kind``: BTF_KIND_STRUCT or BTF_KIND_UNION
  * ``info.vlen``: the number of struct/union members
  * ``info.size``: the size of the struct/union in bytes

``btf_type`` is followed by ``info.vlen`` number of ``struct btf_member``.::

    struct btf_member {
        __u32   name_off;
        __u32   type;
        __u32   offset;
    };

``struct btf_member`` encoding:
  * ``name_off``: offset to a valid C identifier
  * ``type``: the member type
  * ``offset``: <see below>

If the type info ``kind_flag`` is not set, the offset contains
only bit offset of the member. Note that the base type of the
bitfield can only be int or enum type. If the bitfield size
is 32, the base type can be either int or enum type.
If the bitfield size is not 32, the base type must be int,
and int type ``BTF_INT_BITS()`` encodes the bitfield size.

If the ``kind_flag`` is set, the ``btf_member.offset``
contains both member bitfield size and bit offset. The
bitfield size and bit offset are calculated as below.::

  #define BTF_MEMBER_BITFIELD_SIZE(val)   ((val) >> 24)
  #define BTF_MEMBER_BIT_OFFSET(val)      ((val) & 0xffffff)

In this case, if the base type is an int type, it must
be a regular int type:

  * ``BTF_INT_OFFSET()`` must be 0.
  * ``BTF_INT_BITS()`` must be equal to ``{1,2,4,8,16} * 8``.

The following kernel patch introduced ``kind_flag`` and
explained why both modes exist:

  https://github.com/torvalds/linux/commit/9d5f9f701b1891466fb3dbb1806ad97716f95cc3#diff-fa650a64fdd3968396883d2fe8215ff3

2.2.6 BTF_KIND_ENUM
~~~~~~~~~~~~~~~~~~~

``struct btf_type`` encoding requirement:
  * ``name_off``: 0 or offset to a valid C identifier
  * ``info.kind_flag``: 0
  * ``info.kind``: BTF_KIND_ENUM
  * ``info.vlen``: number of enum values
  * ``size``: 4

``btf_type`` is followed by ``info.vlen`` number of ``struct btf_enum``.::

    struct btf_enum {
        __u32   name_off;
        __s32   val;
    };

The ``btf_enum`` encoding:
  * ``name_off``: offset to a valid C identifier
  * ``val``: any value

2.2.7 BTF_KIND_FWD
~~~~~~~~~~~~~~~~~~

``struct btf_type`` encoding requirement:
  * ``name_off``: offset to a valid C identifier
  * ``info.kind_flag``: 0 for struct, 1 for union
  * ``info.kind``: BTF_KIND_FWD
  * ``info.vlen``: 0
  * ``type``: 0

No additional type data follow ``btf_type``.

2.2.8 BTF_KIND_TYPEDEF
~~~~~~~~~~~~~~~~~~~~~~

``struct btf_type`` encoding requirement:
  * ``name_off``: offset to a valid C identifier
  * ``info.kind_flag``: 0
  * ``info.kind``: BTF_KIND_TYPEDEF
  * ``info.vlen``: 0
  * ``type``: the type which can be referred by name at ``name_off``

No additional type data follow ``btf_type``.

2.2.9 BTF_KIND_VOLATILE
~~~~~~~~~~~~~~~~~~~~~~~

``struct btf_type`` encoding requirement:
  * ``name_off``: 0
  * ``info.kind_flag``: 0
  * ``info.kind``: BTF_KIND_VOLATILE
  * ``info.vlen``: 0
  * ``type``: the type with ``volatile`` qualifier

No additional type data follow ``btf_type``.

2.2.10 BTF_KIND_CONST
~~~~~~~~~~~~~~~~~~~~~

``struct btf_type`` encoding requirement:
  * ``name_off``: 0
  * ``info.kind_flag``: 0
  * ``info.kind``: BTF_KIND_CONST
  * ``info.vlen``: 0
  * ``type``: the type with ``const`` qualifier

No additional type data follow ``btf_type``.

2.2.11 BTF_KIND_RESTRICT
~~~~~~~~~~~~~~~~~~~~~~~~

``struct btf_type`` encoding requirement:
  * ``name_off``: 0
  * ``info.kind_flag``: 0
  * ``info.kind``: BTF_KIND_RESTRICT
  * ``info.vlen``: 0
  * ``type``: the type with ``restrict`` qualifier

No additional type data follow ``btf_type``.

2.2.12 BTF_KIND_FUNC
~~~~~~~~~~~~~~~~~~~~

``struct btf_type`` encoding requirement:
  * ``name_off``: offset to a valid C identifier
  * ``info.kind_flag``: 0
  * ``info.kind``: BTF_KIND_FUNC
  * ``info.vlen``: 0
  * ``type``: a BTF_KIND_FUNC_PROTO type

No additional type data follow ``btf_type``.

A BTF_KIND_FUNC defines, not a type, but a subprogram (function) whose
signature is defined by ``type``. The subprogram is thus an instance of
that type. The BTF_KIND_FUNC may in turn be referenced by a func_info in
the :ref:`BTF_Ext_Section` (ELF) or in the arguments to
:ref:`BPF_Prog_Load` (ABI).

2.2.13 BTF_KIND_FUNC_PROTO
~~~~~~~~~~~~~~~~~~~~~~~~~~

``struct btf_type`` encoding requirement:
  * ``name_off``: 0
  * ``info.kind_flag``: 0
  * ``info.kind``: BTF_KIND_FUNC_PROTO
  * ``info.vlen``: # of parameters
  * ``type``: the return type

``btf_type`` is followed by ``info.vlen`` number of ``struct btf_param``.::

    struct btf_param {
        __u32   name_off;
        __u32   type;
    };

If a BTF_KIND_FUNC_PROTO type is referred by a BTF_KIND_FUNC type,
then ``btf_param.name_off`` must point to a valid C identifier
except for the possible last argument representing the variable
argument. The btf_param.type refers to parameter type.

If the function has variable arguments, the last parameter
is encoded with ``name_off = 0`` and ``type = 0``.

3. BTF Kernel API
*****************

The following bpf syscall command involves BTF:
   * BPF_BTF_LOAD: load a blob of BTF data into kernel
   * BPF_MAP_CREATE: map creation with btf key and value type info.
   * BPF_PROG_LOAD: prog load with btf function and line info.
   * BPF_BTF_GET_FD_BY_ID: get a btf fd
   * BPF_OBJ_GET_INFO_BY_FD: btf, func_info, line_info
     and other btf related info are returned.

The workflow typically looks like:
::

  Application:
      BPF_BTF_LOAD
          |
          v
      BPF_MAP_CREATE and BPF_PROG_LOAD
          |
          V
      ......

  Introspection tool:
      ......
      BPF_{PROG,MAP}_GET_NEXT_ID (get prog/map id's)
          |
          V
      BPF_{PROG,MAP}_GET_FD_BY_ID (get a prog/map fd)
          |
          V
      BPF_OBJ_GET_INFO_BY_FD (get bpf_prog_info/bpf_map_info with btf_id)
          |                                     |
          V                                     |
      BPF_BTF_GET_FD_BY_ID (get btf_fd)         |
          |                                     |
          V                                     |
      BPF_OBJ_GET_INFO_BY_FD (get btf)          |
          |                                     |
          V                                     V
      pretty print types, dump func signatures and line info, etc.


3.1 BPF_BTF_LOAD
================

Load a blob of BTF data into kernel. A blob of data
described in :ref:`BTF_Type_String`
can be directly loaded into the kernel.
A ``btf_fd`` returns to userspace.

3.2 BPF_MAP_CREATE
==================

A map can be created with ``btf_fd`` and specified key/value type id.::

    __u32   btf_fd;         /* fd pointing to a BTF type data */
    __u32   btf_key_type_id;        /* BTF type_id of the key */
    __u32   btf_value_type_id;      /* BTF type_id of the value */

In libbpf, the map can be defined with extra annotation like below:
::

    struct bpf_map_def SEC("maps") btf_map = {
        .type = BPF_MAP_TYPE_ARRAY,
        .key_size = sizeof(int),
        .value_size = sizeof(struct ipv_counts),
        .max_entries = 4,
    };
    BPF_ANNOTATE_KV_PAIR(btf_map, int, struct ipv_counts);

Here, the parameters for macro BPF_ANNOTATE_KV_PAIR are map name,
key and value types for the map.
During ELF parsing, libbpf is able to extract key/value type_id's
and assigned them to BPF_MAP_CREATE attributes automatically.

.. _BPF_Prog_Load:

3.3 BPF_PROG_LOAD
=================

During prog_load, func_info and line_info can be passed to kernel with
proper values for the following attributes:
::

    __u32           insn_cnt;
    __aligned_u64   insns;
    ......
    __u32           prog_btf_fd;    /* fd pointing to BTF type data */
    __u32           func_info_rec_size;     /* userspace bpf_func_info size */
    __aligned_u64   func_info;      /* func info */
    __u32           func_info_cnt;  /* number of bpf_func_info records */
    __u32           line_info_rec_size;     /* userspace bpf_line_info size */
    __aligned_u64   line_info;      /* line info */
    __u32           line_info_cnt;  /* number of bpf_line_info records */

The func_info and line_info are an array of below, respectively.::

    struct bpf_func_info {
        __u32   insn_off; /* [0, insn_cnt - 1] */
        __u32   type_id;  /* pointing to a BTF_KIND_FUNC type */
    };
    struct bpf_line_info {
        __u32   insn_off; /* [0, insn_cnt - 1] */
        __u32   file_name_off; /* offset to string table for the filename */
        __u32   line_off; /* offset to string table for the source line */
        __u32   line_col; /* line number and column number */
    };

func_info_rec_size is the size of each func_info record, and line_info_rec_size
is the size of each line_info record. Passing the record size to kernel make
it possible to extend the record itself in the future.

Below are requirements for func_info:
  * func_info[0].insn_off must be 0.
  * the func_info insn_off is in strictly increasing order and matches
    bpf func boundaries.

Below are requirements for line_info:
  * the first insn in each func must points to a line_info record.
  * the line_info insn_off is in strictly increasing order.

For line_info, the line number and column number are defined as below:
::

    #define BPF_LINE_INFO_LINE_NUM(line_col)        ((line_col) >> 10)
    #define BPF_LINE_INFO_LINE_COL(line_col)        ((line_col) & 0x3ff)

3.4 BPF_{PROG,MAP}_GET_NEXT_ID

In kernel, every loaded program, map or btf has a unique id.
The id won't change during the life time of the program, map or btf.

The bpf syscall command BPF_{PROG,MAP}_GET_NEXT_ID
returns all id's, one for each command, to user space, for bpf
program or maps,
so the inspection tool can inspect all programs and maps.

3.5 BPF_{PROG,MAP}_GET_FD_BY_ID

The introspection tool cannot use id to get details about program or maps.
A file descriptor needs to be obtained first for reference counting purpose.

3.6 BPF_OBJ_GET_INFO_BY_FD
==========================

Once a program/map fd is acquired, the introspection tool can
get the detailed information from kernel about this fd,
some of which is btf related. For example,
``bpf_map_info`` returns ``btf_id``, key/value type id.
``bpf_prog_info`` returns ``btf_id``, func_info and line info
for translated bpf byte codes, and jited_line_info.

3.7 BPF_BTF_GET_FD_BY_ID
========================

With ``btf_id`` obtained in ``bpf_map_info`` and ``bpf_prog_info``,
bpf syscall command BPF_BTF_GET_FD_BY_ID can retrieve a btf fd.
Then, with command BPF_OBJ_GET_INFO_BY_FD, the btf blob, originally
loaded into the kernel with BPF_BTF_LOAD, can be retrieved.

With the btf blob, ``bpf_map_info`` and ``bpf_prog_info``, the introspection
tool has full btf knowledge and is able to pretty print map key/values,
dump func signatures, dump line info along with byte/jit codes.

4. ELF File Format Interface
****************************

4.1 .BTF section
================

The .BTF section contains type and string data. The format of this section
is same as the one describe in :ref:`BTF_Type_String`.

.. _BTF_Ext_Section:

4.2 .BTF.ext section
====================

The .BTF.ext section encodes func_info and line_info which
needs loader manipulation before loading into the kernel.

The specification for .BTF.ext section is defined at
``tools/lib/bpf/btf.h`` and ``tools/lib/bpf/btf.c``.

The current header of .BTF.ext section::

    struct btf_ext_header {
        __u16   magic;
        __u8    version;
        __u8    flags;
        __u32   hdr_len;

        /* All offsets are in bytes relative to the end of this header */
        __u32   func_info_off;
        __u32   func_info_len;
        __u32   line_info_off;
        __u32   line_info_len;
    };

It is very similar to .BTF section. Instead of type/string section,
it contains func_info and line_info section. See :ref:`BPF_Prog_Load`
for details about func_info and line_info record format.

The func_info is organized as below.::

     func_info_rec_size
     btf_ext_info_sec for section #1 /* func_info for section #1 */
     btf_ext_info_sec for section #2 /* func_info for section #2 */
     ...

``func_info_rec_size`` specifies the size of ``bpf_func_info`` structure
when .BTF.ext is generated. btf_ext_info_sec, defined below, is
the func_info for each specific ELF section.::

     struct btf_ext_info_sec {
        __u32   sec_name_off; /* offset to section name */
        __u32   num_info;
        /* Followed by num_info * record_size number of bytes */
        __u8    data[0];
     };

Here, num_info must be greater than 0.

The line_info is organized as below.::

     line_info_rec_size
     btf_ext_info_sec for section #1 /* line_info for section #1 */
     btf_ext_info_sec for section #2 /* line_info for section #2 */
     ...

``line_info_rec_size`` specifies the size of ``bpf_line_info`` structure
when .BTF.ext is generated.

The interpretation of ``bpf_func_info->insn_off`` and
``bpf_line_info->insn_off`` is different between kernel API and ELF API.
For kernel API, the ``insn_off`` is the instruction offset in the unit
of ``struct bpf_insn``. For ELF API, the ``insn_off`` is the byte offset
from the beginning of section (``btf_ext_info_sec->sec_name_off``).

5. Using BTF
************

5.1 bpftool map pretty print
============================

With BTF, the map key/value can be printed based on fields rather than
simply raw bytes. This is especially
valuable for large structure or if you data structure
has bitfields. For example, for the following map,::

      enum A { A1, A2, A3, A4, A5 };
      typedef enum A ___A;
      struct tmp_t {
           char a1:4;
           int  a2:4;
           int  :4;
           __u32 a3:4;
           int b;
           ___A b1:4;
           enum A b2:4;
      };
      struct bpf_map_def SEC("maps") tmpmap = {
           .type = BPF_MAP_TYPE_ARRAY,
           .key_size = sizeof(__u32),
           .value_size = sizeof(struct tmp_t),
           .max_entries = 1,
      };
      BPF_ANNOTATE_KV_PAIR(tmpmap, int, struct tmp_t);

bpftool is able to pretty print like below:
::

      [{
            "key": 0,
            "value": {
                "a1": 0x2,
                "a2": 0x4,
                "a3": 0x6,
                "b": 7,
                "b1": 0x8,
                "b2": 0xa
            }
        }
      ]

5.2 bpftool prog dump
=====================

The following is an example to show func_info and line_info
can help prog dump with better kernel symbol name, function prototype
and line information.::

    $ bpftool prog dump jited pinned /sys/fs/bpf/test_btf_haskv
    [...]
    int test_long_fname_2(struct dummy_tracepoint_args * arg):
    bpf_prog_44a040bf25481309_test_long_fname_2:
    ; static int test_long_fname_2(struct dummy_tracepoint_args *arg)
       0:   push   %rbp
       1:   mov    %rsp,%rbp
       4:   sub    $0x30,%rsp
       b:   sub    $0x28,%rbp
       f:   mov    %rbx,0x0(%rbp)
      13:   mov    %r13,0x8(%rbp)
      17:   mov    %r14,0x10(%rbp)
      1b:   mov    %r15,0x18(%rbp)
      1f:   xor    %eax,%eax
      21:   mov    %rax,0x20(%rbp)
      25:   xor    %esi,%esi
    ; int key = 0;
      27:   mov    %esi,-0x4(%rbp)
    ; if (!arg->sock)
      2a:   mov    0x8(%rdi),%rdi
    ; if (!arg->sock)
      2e:   cmp    $0x0,%rdi
      32:   je     0x0000000000000070
      34:   mov    %rbp,%rsi
    ; counts = bpf_map_lookup_elem(&btf_map, &key);
    [...]

5.3 verifier log
================

The following is an example how line_info can help verifier failure debug.::

       /* The code at tools/testing/selftests/bpf/test_xdp_noinline.c
        * is modified as below.
        */
       data = (void *)(long)xdp->data;
       data_end = (void *)(long)xdp->data_end;
       /*
       if (data + 4 > data_end)
               return XDP_DROP;
       */
       *(u32 *)data = dst->dst;

    $ bpftool prog load ./test_xdp_noinline.o /sys/fs/bpf/test_xdp_noinline type xdp
        ; data = (void *)(long)xdp->data;
        224: (79) r2 = *(u64 *)(r10 -112)
        225: (61) r2 = *(u32 *)(r2 +0)
        ; *(u32 *)data = dst->dst;
        226: (63) *(u32 *)(r2 +0) = r1
        invalid access to packet, off=0 size=4, R2(id=0,off=0,r=0)
        R2 offset is outside of the packet

6. BTF Generation
*****************

You need latest pahole

  https://git.kernel.org/pub/scm/devel/pahole/pahole.git/

or llvm (8.0 or later). The pahole acts as a dwarf2btf converter. It doesn't support .BTF.ext
and btf BTF_KIND_FUNC type yet. For example,::

      -bash-4.4$ cat t.c
      struct t {
        int a:2;
        int b:3;
        int c:2;
      } g;
      -bash-4.4$ gcc -c -O2 -g t.c
      -bash-4.4$ pahole -JV t.o
      File t.o:
      [1] STRUCT t kind_flag=1 size=4 vlen=3
              a type_id=2 bitfield_size=2 bits_offset=0
              b type_id=2 bitfield_size=3 bits_offset=2
              c type_id=2 bitfield_size=2 bits_offset=5
      [2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED

The llvm is able to generate .BTF and .BTF.ext directly with -g for bpf target only.
The assembly code (-S) is able to show the BTF encoding in assembly format.::

    -bash-4.4$ cat t2.c
    typedef int __int32;
    struct t2 {
      int a2;
      int (*f2)(char q1, __int32 q2, ...);
      int (*f3)();
    } g2;
    int main() { return 0; }
    int test() { return 0; }
    -bash-4.4$ clang -c -g -O2 -target bpf t2.c
    -bash-4.4$ readelf -S t2.o
      ......
      [ 8] .BTF              PROGBITS         0000000000000000  00000247
           000000000000016e  0000000000000000           0     0     1
      [ 9] .BTF.ext          PROGBITS         0000000000000000  000003b5
           0000000000000060  0000000000000000           0     0     1
      [10] .rel.BTF.ext      REL              0000000000000000  000007e0
           0000000000000040  0000000000000010          16     9     8
      ......
    -bash-4.4$ clang -S -g -O2 -target bpf t2.c
    -bash-4.4$ cat t2.s
      ......
            .section        .BTF,"",@progbits
            .short  60319                   # 0xeb9f
            .byte   1
            .byte   0
            .long   24
            .long   0
            .long   220
            .long   220
            .long   122
            .long   0                       # BTF_KIND_FUNC_PROTO(id = 1)
            .long   218103808               # 0xd000000
            .long   2
            .long   83                      # BTF_KIND_INT(id = 2)
            .long   16777216                # 0x1000000
            .long   4
            .long   16777248                # 0x1000020
      ......
            .byte   0                       # string offset=0
            .ascii  ".text"                 # string offset=1
            .byte   0
            .ascii  "/home/yhs/tmp-pahole/t2.c" # string offset=7
            .byte   0
            .ascii  "int main() { return 0; }" # string offset=33
            .byte   0
            .ascii  "int test() { return 0; }" # string offset=58
            .byte   0
            .ascii  "int"                   # string offset=83
      ......
            .section        .BTF.ext,"",@progbits
            .short  60319                   # 0xeb9f
            .byte   1
            .byte   0
            .long   24
            .long   0
            .long   28
            .long   28
            .long   44
            .long   8                       # FuncInfo
            .long   1                       # FuncInfo section string offset=1
            .long   2
            .long   .Lfunc_begin0
            .long   3
            .long   .Lfunc_begin1
            .long   5
            .long   16                      # LineInfo
            .long   1                       # LineInfo section string offset=1
            .long   2
            .long   .Ltmp0
            .long   7
            .long   33
            .long   7182                    # Line 7 Col 14
            .long   .Ltmp3
            .long   7
            .long   58
            .long   8206                    # Line 8 Col 14

7. Testing
**********

Kernel bpf selftest `test_btf.c` provides extensive set of BTF related tests.