e1000e: make function tables const
The initial function and setup tables can be marked as constant.
Reported-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
diff --git a/drivers/net/ethernet/intel/e1000e/80003es2lan.c b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
index b754433..e1159e5 100644
--- a/drivers/net/ethernet/intel/e1000e/80003es2lan.c
+++ b/drivers/net/ethernet/intel/e1000e/80003es2lan.c
@@ -1441,7 +1441,7 @@
er32(ICRXDMTC);
}
-static struct e1000_mac_operations es2_mac_ops = {
+static const struct e1000_mac_operations es2_mac_ops = {
.read_mac_addr = e1000_read_mac_addr_80003es2lan,
.id_led_init = e1000e_id_led_init,
.blink_led = e1000e_blink_led_generic,
@@ -1464,7 +1464,7 @@
.setup_led = e1000e_setup_led_generic,
};
-static struct e1000_phy_operations es2_phy_ops = {
+static const struct e1000_phy_operations es2_phy_ops = {
.acquire = e1000_acquire_phy_80003es2lan,
.check_polarity = e1000_check_polarity_m88,
.check_reset_block = e1000e_check_reset_block_generic,
@@ -1482,7 +1482,7 @@
.cfg_on_link_up = e1000_cfg_on_link_up_80003es2lan,
};
-static struct e1000_nvm_operations es2_nvm_ops = {
+static const struct e1000_nvm_operations es2_nvm_ops = {
.acquire = e1000_acquire_nvm_80003es2lan,
.read = e1000e_read_nvm_eerd,
.release = e1000_release_nvm_80003es2lan,
@@ -1492,7 +1492,7 @@
.write = e1000_write_nvm_80003es2lan,
};
-struct e1000_info e1000_es2_info = {
+const struct e1000_info e1000_es2_info = {
.mac = e1000_80003es2lan,
.flags = FLAG_HAS_HW_VLAN_FILTER
| FLAG_HAS_JUMBO_FRAMES
