diff --git a/drivers/net/sfc/Kconfig b/drivers/net/sfc/Kconfig
new file mode 100644
index 0000000..dbad95c
--- /dev/null
+++ b/drivers/net/sfc/Kconfig
@@ -0,0 +1,12 @@
+config SFC
+	tristate "Solarflare Solarstorm SFC4000 support"
+	depends on PCI && INET
+	select MII
+	select INET_LRO
+	select CRC32
+	help
+	  This driver supports 10-gigabit Ethernet cards based on
+	  the Solarflare Communications Solarstorm SFC4000 controller.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called sfc.
diff --git a/drivers/net/sfc/Makefile b/drivers/net/sfc/Makefile
new file mode 100644
index 0000000..0f02344
--- /dev/null
+++ b/drivers/net/sfc/Makefile
@@ -0,0 +1,5 @@
+sfc-y			+= efx.o falcon.o tx.o rx.o falcon_xmac.o \
+			   i2c-direct.o ethtool.o xfp_phy.o mdio_10g.o \
+			   tenxpress.o boards.o sfe4001.o
+
+obj-$(CONFIG_SFC)	+= sfc.o
diff --git a/drivers/net/sfc/bitfield.h b/drivers/net/sfc/bitfield.h
new file mode 100644
index 0000000..2806201
--- /dev/null
+++ b/drivers/net/sfc/bitfield.h
@@ -0,0 +1,508 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2006-2008 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_BITFIELD_H
+#define EFX_BITFIELD_H
+
+/*
+ * Efx bitfield access
+ *
+ * Efx NICs make extensive use of bitfields up to 128 bits
+ * wide.  Since there is no native 128-bit datatype on most systems,
+ * and since 64-bit datatypes are inefficient on 32-bit systems and
+ * vice versa, we wrap accesses in a way that uses the most efficient
+ * datatype.
+ *
+ * The NICs are PCI devices and therefore little-endian.  Since most
+ * of the quantities that we deal with are DMAed to/from host memory,
+ * we define our datatypes (efx_oword_t, efx_qword_t and
+ * efx_dword_t) to be little-endian.
+ */
+
+/* Lowest bit numbers and widths */
+#define EFX_DUMMY_FIELD_LBN 0
+#define EFX_DUMMY_FIELD_WIDTH 0
+#define EFX_DWORD_0_LBN 0
+#define EFX_DWORD_0_WIDTH 32
+#define EFX_DWORD_1_LBN 32
+#define EFX_DWORD_1_WIDTH 32
+#define EFX_DWORD_2_LBN 64
+#define EFX_DWORD_2_WIDTH 32
+#define EFX_DWORD_3_LBN 96
+#define EFX_DWORD_3_WIDTH 32
+
+/* Specified attribute (e.g. LBN) of the specified field */
+#define EFX_VAL(field, attribute) field ## _ ## attribute
+/* Low bit number of the specified field */
+#define EFX_LOW_BIT(field) EFX_VAL(field, LBN)
+/* Bit width of the specified field */
+#define EFX_WIDTH(field) EFX_VAL(field, WIDTH)
+/* High bit number of the specified field */
+#define EFX_HIGH_BIT(field) (EFX_LOW_BIT(field) + EFX_WIDTH(field) - 1)
+/* Mask equal in width to the specified field.
+ *
+ * For example, a field with width 5 would have a mask of 0x1f.
+ *
+ * The maximum width mask that can be generated is 64 bits.
+ */
+#define EFX_MASK64(field)					\
+	(EFX_WIDTH(field) == 64 ? ~((u64) 0) :		\
+	 (((((u64) 1) << EFX_WIDTH(field))) - 1))
+
+/* Mask equal in width to the specified field.
+ *
+ * For example, a field with width 5 would have a mask of 0x1f.
+ *
+ * The maximum width mask that can be generated is 32 bits.  Use
+ * EFX_MASK64 for higher width fields.
+ */
+#define EFX_MASK32(field)					\
+	(EFX_WIDTH(field) == 32 ? ~((u32) 0) :		\
+	 (((((u32) 1) << EFX_WIDTH(field))) - 1))
+
+/* A doubleword (i.e. 4 byte) datatype - little-endian in HW */
+typedef union efx_dword {
+	__le32 u32[1];
+} efx_dword_t;
+
+/* A quadword (i.e. 8 byte) datatype - little-endian in HW */
+typedef union efx_qword {
+	__le64 u64[1];
+	__le32 u32[2];
+	efx_dword_t dword[2];
+} efx_qword_t;
+
+/* An octword (eight-word, i.e. 16 byte) datatype - little-endian in HW */
+typedef union efx_oword {
+	__le64 u64[2];
+	efx_qword_t qword[2];
+	__le32 u32[4];
+	efx_dword_t dword[4];
+} efx_oword_t;
+
+/* Format string and value expanders for printk */
+#define EFX_DWORD_FMT "%08x"
+#define EFX_QWORD_FMT "%08x:%08x"
+#define EFX_OWORD_FMT "%08x:%08x:%08x:%08x"
+#define EFX_DWORD_VAL(dword)				\
+	((unsigned int) le32_to_cpu((dword).u32[0]))
+#define EFX_QWORD_VAL(qword)				\
+	((unsigned int) le32_to_cpu((qword).u32[1])),	\
+	((unsigned int) le32_to_cpu((qword).u32[0]))
+#define EFX_OWORD_VAL(oword)				\
+	((unsigned int) le32_to_cpu((oword).u32[3])),	\
+	((unsigned int) le32_to_cpu((oword).u32[2])),	\
+	((unsigned int) le32_to_cpu((oword).u32[1])),	\
+	((unsigned int) le32_to_cpu((oword).u32[0]))
+
+/*
+ * Extract bit field portion [low,high) from the native-endian element
+ * which contains bits [min,max).
+ *
+ * For example, suppose "element" represents the high 32 bits of a
+ * 64-bit value, and we wish to extract the bits belonging to the bit
+ * field occupying bits 28-45 of this 64-bit value.
+ *
+ * Then EFX_EXTRACT ( element, 32, 63, 28, 45 ) would give
+ *
+ *   ( element ) << 4
+ *
+ * The result will contain the relevant bits filled in in the range
+ * [0,high-low), with garbage in bits [high-low+1,...).
+ */
+#define EFX_EXTRACT_NATIVE(native_element, min, max, low, high)		\
+	(((low > max) || (high < min)) ? 0 :				\
+	 ((low > min) ?							\
+	  ((native_element) >> (low - min)) :				\
+	  ((native_element) << (min - low))))
+
+/*
+ * Extract bit field portion [low,high) from the 64-bit little-endian
+ * element which contains bits [min,max)
+ */
+#define EFX_EXTRACT64(element, min, max, low, high)			\
+	EFX_EXTRACT_NATIVE(le64_to_cpu(element), min, max, low, high)
+
+/*
+ * Extract bit field portion [low,high) from the 32-bit little-endian
+ * element which contains bits [min,max)
+ */
+#define EFX_EXTRACT32(element, min, max, low, high)			\
+	EFX_EXTRACT_NATIVE(le32_to_cpu(element), min, max, low, high)
+
+#define EFX_EXTRACT_OWORD64(oword, low, high)				\
+	(EFX_EXTRACT64((oword).u64[0], 0, 63, low, high) |		\
+	 EFX_EXTRACT64((oword).u64[1], 64, 127, low, high))
+
+#define EFX_EXTRACT_QWORD64(qword, low, high)				\
+	EFX_EXTRACT64((qword).u64[0], 0, 63, low, high)
+
+#define EFX_EXTRACT_OWORD32(oword, low, high)				\
+	(EFX_EXTRACT32((oword).u32[0], 0, 31, low, high) |		\
+	 EFX_EXTRACT32((oword).u32[1], 32, 63, low, high) |		\
+	 EFX_EXTRACT32((oword).u32[2], 64, 95, low, high) |		\
+	 EFX_EXTRACT32((oword).u32[3], 96, 127, low, high))
+
+#define EFX_EXTRACT_QWORD32(qword, low, high)				\
+	(EFX_EXTRACT32((qword).u32[0], 0, 31, low, high) |		\
+	 EFX_EXTRACT32((qword).u32[1], 32, 63, low, high))
+
+#define EFX_EXTRACT_DWORD(dword, low, high)				\
+	EFX_EXTRACT32((dword).u32[0], 0, 31, low, high)
+
+#define EFX_OWORD_FIELD64(oword, field)					\
+	(EFX_EXTRACT_OWORD64(oword, EFX_LOW_BIT(field), EFX_HIGH_BIT(field)) \
+	 & EFX_MASK64(field))
+
+#define EFX_QWORD_FIELD64(qword, field)					\
+	(EFX_EXTRACT_QWORD64(qword, EFX_LOW_BIT(field), EFX_HIGH_BIT(field)) \
+	 & EFX_MASK64(field))
+
+#define EFX_OWORD_FIELD32(oword, field)					\
+	(EFX_EXTRACT_OWORD32(oword, EFX_LOW_BIT(field), EFX_HIGH_BIT(field)) \
+	 & EFX_MASK32(field))
+
+#define EFX_QWORD_FIELD32(qword, field)					\
+	(EFX_EXTRACT_QWORD32(qword, EFX_LOW_BIT(field), EFX_HIGH_BIT(field)) \
+	 & EFX_MASK32(field))
+
+#define EFX_DWORD_FIELD(dword, field)					   \
+	(EFX_EXTRACT_DWORD(dword, EFX_LOW_BIT(field), EFX_HIGH_BIT(field)) \
+	 & EFX_MASK32(field))
+
+#define EFX_OWORD_IS_ZERO64(oword)					\
+	(((oword).u64[0] | (oword).u64[1]) == (__force __le64) 0)
+
+#define EFX_QWORD_IS_ZERO64(qword)					\
+	(((qword).u64[0]) == (__force __le64) 0)
+
+#define EFX_OWORD_IS_ZERO32(oword)					     \
+	(((oword).u32[0] | (oword).u32[1] | (oword).u32[2] | (oword).u32[3]) \
+	 == (__force __le32) 0)
+
+#define EFX_QWORD_IS_ZERO32(qword)					\
+	(((qword).u32[0] | (qword).u32[1]) == (__force __le32) 0)
+
+#define EFX_DWORD_IS_ZERO(dword)					\
+	(((dword).u32[0]) == (__force __le32) 0)
+
+#define EFX_OWORD_IS_ALL_ONES64(oword)					\
+	(((oword).u64[0] & (oword).u64[1]) == ~((__force __le64) 0))
+
+#define EFX_QWORD_IS_ALL_ONES64(qword)					\
+	((qword).u64[0] == ~((__force __le64) 0))
+
+#define EFX_OWORD_IS_ALL_ONES32(oword)					\
+	(((oword).u32[0] & (oword).u32[1] & (oword).u32[2] & (oword).u32[3]) \
+	 == ~((__force __le32) 0))
+
+#define EFX_QWORD_IS_ALL_ONES32(qword)					\
+	(((qword).u32[0] & (qword).u32[1]) == ~((__force __le32) 0))
+
+#define EFX_DWORD_IS_ALL_ONES(dword)					\
+	((dword).u32[0] == ~((__force __le32) 0))
+
+#if BITS_PER_LONG == 64
+#define EFX_OWORD_FIELD		EFX_OWORD_FIELD64
+#define EFX_QWORD_FIELD		EFX_QWORD_FIELD64
+#define EFX_OWORD_IS_ZERO	EFX_OWORD_IS_ZERO64
+#define EFX_QWORD_IS_ZERO	EFX_QWORD_IS_ZERO64
+#define EFX_OWORD_IS_ALL_ONES	EFX_OWORD_IS_ALL_ONES64
+#define EFX_QWORD_IS_ALL_ONES	EFX_QWORD_IS_ALL_ONES64
+#else
+#define EFX_OWORD_FIELD		EFX_OWORD_FIELD32
+#define EFX_QWORD_FIELD		EFX_QWORD_FIELD32
+#define EFX_OWORD_IS_ZERO	EFX_OWORD_IS_ZERO32
+#define EFX_QWORD_IS_ZERO	EFX_QWORD_IS_ZERO32
+#define EFX_OWORD_IS_ALL_ONES	EFX_OWORD_IS_ALL_ONES32
+#define EFX_QWORD_IS_ALL_ONES	EFX_QWORD_IS_ALL_ONES32
+#endif
+
+/*
+ * Construct bit field portion
+ *
+ * Creates the portion of the bit field [low,high) that lies within
+ * the range [min,max).
+ */
+#define EFX_INSERT_NATIVE64(min, max, low, high, value)		\
+	(((low > max) || (high < min)) ? 0 :			\
+	 ((low > min) ?						\
+	  (((u64) (value)) << (low - min)) :		\
+	  (((u64) (value)) >> (min - low))))
+
+#define EFX_INSERT_NATIVE32(min, max, low, high, value)		\
+	(((low > max) || (high < min)) ? 0 :			\
+	 ((low > min) ?						\
+	  (((u32) (value)) << (low - min)) :		\
+	  (((u32) (value)) >> (min - low))))
+
+#define EFX_INSERT_NATIVE(min, max, low, high, value)		\
+	((((max - min) >= 32) || ((high - low) >= 32)) ?	\
+	 EFX_INSERT_NATIVE64(min, max, low, high, value) :	\
+	 EFX_INSERT_NATIVE32(min, max, low, high, value))
+
+/*
+ * Construct bit field portion
+ *
+ * Creates the portion of the named bit field that lies within the
+ * range [min,max).
+ */
+#define EFX_INSERT_FIELD_NATIVE(min, max, field, value)		\
+	EFX_INSERT_NATIVE(min, max, EFX_LOW_BIT(field),		\
+			  EFX_HIGH_BIT(field), value)
+
+/*
+ * Construct bit field
+ *
+ * Creates the portion of the named bit fields that lie within the
+ * range [min,max).
+ */
+#define EFX_INSERT_FIELDS_NATIVE(min, max,				\
+				 field1, value1,			\
+				 field2, value2,			\
+				 field3, value3,			\
+				 field4, value4,			\
+				 field5, value5,			\
+				 field6, value6,			\
+				 field7, value7,			\
+				 field8, value8,			\
+				 field9, value9,			\
+				 field10, value10)			\
+	(EFX_INSERT_FIELD_NATIVE((min), (max), field1, (value1)) |	\
+	 EFX_INSERT_FIELD_NATIVE((min), (max), field2, (value2)) |	\
+	 EFX_INSERT_FIELD_NATIVE((min), (max), field3, (value3)) |	\
+	 EFX_INSERT_FIELD_NATIVE((min), (max), field4, (value4)) |	\
+	 EFX_INSERT_FIELD_NATIVE((min), (max), field5, (value5)) |	\
+	 EFX_INSERT_FIELD_NATIVE((min), (max), field6, (value6)) |	\
+	 EFX_INSERT_FIELD_NATIVE((min), (max), field7, (value7)) |	\
+	 EFX_INSERT_FIELD_NATIVE((min), (max), field8, (value8)) |	\
+	 EFX_INSERT_FIELD_NATIVE((min), (max), field9, (value9)) |	\
+	 EFX_INSERT_FIELD_NATIVE((min), (max), field10, (value10)))
+
+#define EFX_INSERT_FIELDS64(...)				\
+	cpu_to_le64(EFX_INSERT_FIELDS_NATIVE(__VA_ARGS__))
+
+#define EFX_INSERT_FIELDS32(...)				\
+	cpu_to_le32(EFX_INSERT_FIELDS_NATIVE(__VA_ARGS__))
+
+#define EFX_POPULATE_OWORD64(oword, ...) do {				\
+	(oword).u64[0] = EFX_INSERT_FIELDS64(0, 63, __VA_ARGS__);	\
+	(oword).u64[1] = EFX_INSERT_FIELDS64(64, 127, __VA_ARGS__);	\
+	} while (0)
+
+#define EFX_POPULATE_QWORD64(qword, ...) do {				\
+	(qword).u64[0] = EFX_INSERT_FIELDS64(0, 63, __VA_ARGS__);	\
+	} while (0)
+
+#define EFX_POPULATE_OWORD32(oword, ...) do {				\
+	(oword).u32[0] = EFX_INSERT_FIELDS32(0, 31, __VA_ARGS__);	\
+	(oword).u32[1] = EFX_INSERT_FIELDS32(32, 63, __VA_ARGS__);	\
+	(oword).u32[2] = EFX_INSERT_FIELDS32(64, 95, __VA_ARGS__);	\
+	(oword).u32[3] = EFX_INSERT_FIELDS32(96, 127, __VA_ARGS__);	\
+	} while (0)
+
+#define EFX_POPULATE_QWORD32(qword, ...) do {				\
+	(qword).u32[0] = EFX_INSERT_FIELDS32(0, 31, __VA_ARGS__);	\
+	(qword).u32[1] = EFX_INSERT_FIELDS32(32, 63, __VA_ARGS__);	\
+	} while (0)
+
+#define EFX_POPULATE_DWORD(dword, ...) do {				\
+	(dword).u32[0] = EFX_INSERT_FIELDS32(0, 31, __VA_ARGS__);	\
+	} while (0)
+
+#if BITS_PER_LONG == 64
+#define EFX_POPULATE_OWORD EFX_POPULATE_OWORD64
+#define EFX_POPULATE_QWORD EFX_POPULATE_QWORD64
+#else
+#define EFX_POPULATE_OWORD EFX_POPULATE_OWORD32
+#define EFX_POPULATE_QWORD EFX_POPULATE_QWORD32
+#endif
+
+/* Populate an octword field with various numbers of arguments */
+#define EFX_POPULATE_OWORD_10 EFX_POPULATE_OWORD
+#define EFX_POPULATE_OWORD_9(oword, ...) \
+	EFX_POPULATE_OWORD_10(oword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_POPULATE_OWORD_8(oword, ...) \
+	EFX_POPULATE_OWORD_9(oword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_POPULATE_OWORD_7(oword, ...) \
+	EFX_POPULATE_OWORD_8(oword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_POPULATE_OWORD_6(oword, ...) \
+	EFX_POPULATE_OWORD_7(oword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_POPULATE_OWORD_5(oword, ...) \
+	EFX_POPULATE_OWORD_6(oword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_POPULATE_OWORD_4(oword, ...) \
+	EFX_POPULATE_OWORD_5(oword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_POPULATE_OWORD_3(oword, ...) \
+	EFX_POPULATE_OWORD_4(oword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_POPULATE_OWORD_2(oword, ...) \
+	EFX_POPULATE_OWORD_3(oword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_POPULATE_OWORD_1(oword, ...) \
+	EFX_POPULATE_OWORD_2(oword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_ZERO_OWORD(oword) \
+	EFX_POPULATE_OWORD_1(oword, EFX_DUMMY_FIELD, 0)
+#define EFX_SET_OWORD(oword) \
+	EFX_POPULATE_OWORD_4(oword, \
+			     EFX_DWORD_0, 0xffffffff, \
+			     EFX_DWORD_1, 0xffffffff, \
+			     EFX_DWORD_2, 0xffffffff, \
+			     EFX_DWORD_3, 0xffffffff)
+
+/* Populate a quadword field with various numbers of arguments */
+#define EFX_POPULATE_QWORD_10 EFX_POPULATE_QWORD
+#define EFX_POPULATE_QWORD_9(qword, ...) \
+	EFX_POPULATE_QWORD_10(qword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_POPULATE_QWORD_8(qword, ...) \
+	EFX_POPULATE_QWORD_9(qword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_POPULATE_QWORD_7(qword, ...) \
+	EFX_POPULATE_QWORD_8(qword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_POPULATE_QWORD_6(qword, ...) \
+	EFX_POPULATE_QWORD_7(qword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_POPULATE_QWORD_5(qword, ...) \
+	EFX_POPULATE_QWORD_6(qword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_POPULATE_QWORD_4(qword, ...) \
+	EFX_POPULATE_QWORD_5(qword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_POPULATE_QWORD_3(qword, ...) \
+	EFX_POPULATE_QWORD_4(qword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_POPULATE_QWORD_2(qword, ...) \
+	EFX_POPULATE_QWORD_3(qword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_POPULATE_QWORD_1(qword, ...) \
+	EFX_POPULATE_QWORD_2(qword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_ZERO_QWORD(qword) \
+	EFX_POPULATE_QWORD_1(qword, EFX_DUMMY_FIELD, 0)
+#define EFX_SET_QWORD(qword) \
+	EFX_POPULATE_QWORD_2(qword, \
+			     EFX_DWORD_0, 0xffffffff, \
+			     EFX_DWORD_1, 0xffffffff)
+
+/* Populate a dword field with various numbers of arguments */
+#define EFX_POPULATE_DWORD_10 EFX_POPULATE_DWORD
+#define EFX_POPULATE_DWORD_9(dword, ...) \
+	EFX_POPULATE_DWORD_10(dword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_POPULATE_DWORD_8(dword, ...) \
+	EFX_POPULATE_DWORD_9(dword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_POPULATE_DWORD_7(dword, ...) \
+	EFX_POPULATE_DWORD_8(dword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_POPULATE_DWORD_6(dword, ...) \
+	EFX_POPULATE_DWORD_7(dword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_POPULATE_DWORD_5(dword, ...) \
+	EFX_POPULATE_DWORD_6(dword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_POPULATE_DWORD_4(dword, ...) \
+	EFX_POPULATE_DWORD_5(dword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_POPULATE_DWORD_3(dword, ...) \
+	EFX_POPULATE_DWORD_4(dword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_POPULATE_DWORD_2(dword, ...) \
+	EFX_POPULATE_DWORD_3(dword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_POPULATE_DWORD_1(dword, ...) \
+	EFX_POPULATE_DWORD_2(dword, EFX_DUMMY_FIELD, 0, __VA_ARGS__)
+#define EFX_ZERO_DWORD(dword) \
+	EFX_POPULATE_DWORD_1(dword, EFX_DUMMY_FIELD, 0)
+#define EFX_SET_DWORD(dword) \
+	EFX_POPULATE_DWORD_1(dword, EFX_DWORD_0, 0xffffffff)
+
+/*
+ * Modify a named field within an already-populated structure.  Used
+ * for read-modify-write operations.
+ *
+ */
+
+#define EFX_INVERT_OWORD(oword) do {		\
+	(oword).u64[0] = ~((oword).u64[0]);	\
+	(oword).u64[1] = ~((oword).u64[1]);	\
+	} while (0)
+
+#define EFX_INSERT_FIELD64(...)					\
+	cpu_to_le64(EFX_INSERT_FIELD_NATIVE(__VA_ARGS__))
+
+#define EFX_INSERT_FIELD32(...)					\
+	cpu_to_le32(EFX_INSERT_FIELD_NATIVE(__VA_ARGS__))
+
+#define EFX_INPLACE_MASK64(min, max, field)			\
+	EFX_INSERT_FIELD64(min, max, field, EFX_MASK64(field))
+
+#define EFX_INPLACE_MASK32(min, max, field)			\
+	EFX_INSERT_FIELD32(min, max, field, EFX_MASK32(field))
+
+#define EFX_SET_OWORD_FIELD64(oword, field, value) do {			\
+	(oword).u64[0] = (((oword).u64[0] 				\
+			   & ~EFX_INPLACE_MASK64(0,  63, field))	\
+			  | EFX_INSERT_FIELD64(0,  63, field, value));  \
+	(oword).u64[1] = (((oword).u64[1] 				\
+			   & ~EFX_INPLACE_MASK64(64, 127, field))	\
+			  | EFX_INSERT_FIELD64(64, 127, field, value)); \
+	} while (0)
+
+#define EFX_SET_QWORD_FIELD64(qword, field, value) do {			\
+	(qword).u64[0] = (((qword).u64[0] 				\
+			   & ~EFX_INPLACE_MASK64(0, 63, field))		\
+			  | EFX_INSERT_FIELD64(0, 63, field, value));	\
+	} while (0)
+
+#define EFX_SET_OWORD_FIELD32(oword, field, value) do {			\
+	(oword).u32[0] = (((oword).u32[0] 				\
+			   & ~EFX_INPLACE_MASK32(0, 31, field))		\
+			  | EFX_INSERT_FIELD32(0, 31, field, value));	\
+	(oword).u32[1] = (((oword).u32[1] 				\
+			   & ~EFX_INPLACE_MASK32(32, 63, field))	\
+			  | EFX_INSERT_FIELD32(32, 63, field, value));	\
+	(oword).u32[2] = (((oword).u32[2] 				\
+			   & ~EFX_INPLACE_MASK32(64, 95, field))	\
+			  | EFX_INSERT_FIELD32(64, 95, field, value));	\
+	(oword).u32[3] = (((oword).u32[3] 				\
+			   & ~EFX_INPLACE_MASK32(96, 127, field))	\
+			  | EFX_INSERT_FIELD32(96, 127, field, value));	\
+	} while (0)
+
+#define EFX_SET_QWORD_FIELD32(qword, field, value) do {			\
+	(qword).u32[0] = (((qword).u32[0] 				\
+			   & ~EFX_INPLACE_MASK32(0, 31, field))		\
+			  | EFX_INSERT_FIELD32(0, 31, field, value));	\
+	(qword).u32[1] = (((qword).u32[1] 				\
+			   & ~EFX_INPLACE_MASK32(32, 63, field))	\
+			  | EFX_INSERT_FIELD32(32, 63, field, value));	\
+	} while (0)
+
+#define EFX_SET_DWORD_FIELD(dword, field, value) do {			\
+	(dword).u32[0] = (((dword).u32[0] 				\
+			   & ~EFX_INPLACE_MASK32(0, 31, field))		\
+			  | EFX_INSERT_FIELD32(0, 31, field, value));	\
+	} while (0)
+
+#if BITS_PER_LONG == 64
+#define EFX_SET_OWORD_FIELD EFX_SET_OWORD_FIELD64
+#define EFX_SET_QWORD_FIELD EFX_SET_QWORD_FIELD64
+#else
+#define EFX_SET_OWORD_FIELD EFX_SET_OWORD_FIELD32
+#define EFX_SET_QWORD_FIELD EFX_SET_QWORD_FIELD32
+#endif
+
+#define EFX_SET_OWORD_FIELD_VER(efx, oword, field, value) do { \
+	if (FALCON_REV(efx) >= FALCON_REV_B0) {			   \
+		EFX_SET_OWORD_FIELD((oword), field##_B0, (value)); \
+	} else { \
+		EFX_SET_OWORD_FIELD((oword), field##_A1, (value)); \
+	} \
+} while (0)
+
+#define EFX_QWORD_FIELD_VER(efx, qword, field)	\
+	(FALCON_REV(efx) >= FALCON_REV_B0 ?	\
+	 EFX_QWORD_FIELD((qword), field##_B0) :	\
+	 EFX_QWORD_FIELD((qword), field##_A1))
+
+/* Used to avoid compiler warnings about shift range exceeding width
+ * of the data types when dma_addr_t is only 32 bits wide.
+ */
+#define DMA_ADDR_T_WIDTH	(8 * sizeof(dma_addr_t))
+#define EFX_DMA_TYPE_WIDTH(width) \
+	(((width) < DMA_ADDR_T_WIDTH) ? (width) : DMA_ADDR_T_WIDTH)
+#define EFX_DMA_MAX_MASK ((DMA_ADDR_T_WIDTH == 64) ? \
+			  ~((u64) 0) : ~((u32) 0))
+#define EFX_DMA_MASK(mask) ((mask) & EFX_DMA_MAX_MASK)
+
+#endif /* EFX_BITFIELD_H */
diff --git a/drivers/net/sfc/boards.c b/drivers/net/sfc/boards.c
new file mode 100644
index 0000000..eecaa6d
--- /dev/null
+++ b/drivers/net/sfc/boards.c
@@ -0,0 +1,167 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2007 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#include "net_driver.h"
+#include "phy.h"
+#include "boards.h"
+#include "efx.h"
+
+/* Macros for unpacking the board revision */
+/* The revision info is in host byte order. */
+#define BOARD_TYPE(_rev) (_rev >> 8)
+#define BOARD_MAJOR(_rev) ((_rev >> 4) & 0xf)
+#define BOARD_MINOR(_rev) (_rev & 0xf)
+
+/* Blink support. If the PHY has no auto-blink mode so we hang it off a timer */
+#define BLINK_INTERVAL (HZ/2)
+
+static void blink_led_timer(unsigned long context)
+{
+	struct efx_nic *efx = (struct efx_nic *)context;
+	struct efx_blinker *bl = &efx->board_info.blinker;
+	efx->board_info.set_fault_led(efx, bl->state);
+	bl->state = !bl->state;
+	if (bl->resubmit) {
+		bl->timer.expires = jiffies + BLINK_INTERVAL;
+		add_timer(&bl->timer);
+	}
+}
+
+static void board_blink(struct efx_nic *efx, int blink)
+{
+	struct efx_blinker *blinker = &efx->board_info.blinker;
+
+	/* The rtnl mutex serialises all ethtool ioctls, so
+	 * nothing special needs doing here. */
+	if (blink) {
+		blinker->resubmit = 1;
+		blinker->state = 0;
+		setup_timer(&blinker->timer, blink_led_timer,
+			    (unsigned long)efx);
+		blinker->timer.expires = jiffies + BLINK_INTERVAL;
+		add_timer(&blinker->timer);
+	} else {
+		blinker->resubmit = 0;
+		if (blinker->timer.function)
+			del_timer_sync(&blinker->timer);
+		efx->board_info.set_fault_led(efx, 0);
+	}
+}
+
+/*****************************************************************************
+ * Support for the SFE4002
+ *
+ */
+/****************************************************************************/
+/* LED allocations. Note that on rev A0 boards the schematic and the reality
+ * differ: red and green are swapped. Below is the fixed (A1) layout (there
+ * are only 3 A0 boards in existence, so no real reason to make this
+ * conditional).
+ */
+#define SFE4002_FAULT_LED (2)	/* Red */
+#define SFE4002_RX_LED    (0)	/* Green */
+#define SFE4002_TX_LED    (1)	/* Amber */
+
+static int sfe4002_init_leds(struct efx_nic *efx)
+{
+	/* Set the TX and RX LEDs to reflect status and activity, and the
+	 * fault LED off */
+	xfp_set_led(efx, SFE4002_TX_LED,
+		    QUAKE_LED_TXLINK | QUAKE_LED_LINK_ACTSTAT);
+	xfp_set_led(efx, SFE4002_RX_LED,
+		    QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACTSTAT);
+	xfp_set_led(efx, SFE4002_FAULT_LED, QUAKE_LED_OFF);
+	efx->board_info.blinker.led_num = SFE4002_FAULT_LED;
+	return 0;
+}
+
+static void sfe4002_fault_led(struct efx_nic *efx, int state)
+{
+	xfp_set_led(efx, SFE4002_FAULT_LED, state ? QUAKE_LED_ON :
+			QUAKE_LED_OFF);
+}
+
+static int sfe4002_init(struct efx_nic *efx)
+{
+	efx->board_info.init_leds = sfe4002_init_leds;
+	efx->board_info.set_fault_led = sfe4002_fault_led;
+	efx->board_info.blink = board_blink;
+	return 0;
+}
+
+/* This will get expanded as board-specific details get moved out of the
+ * PHY drivers. */
+struct efx_board_data {
+	const char *ref_model;
+	const char *gen_type;
+	int (*init) (struct efx_nic *nic);
+};
+
+static int dummy_init(struct efx_nic *nic)
+{
+	return 0;
+}
+
+static struct efx_board_data board_data[] = {
+	[EFX_BOARD_INVALID] =
+	{NULL,	    NULL,                  dummy_init},
+	[EFX_BOARD_SFE4001] =
+	{"SFE4001", "10GBASE-T adapter",   sfe4001_poweron},
+	[EFX_BOARD_SFE4002] =
+	{"SFE4002", "XFP adapter",         sfe4002_init},
+};
+
+int efx_set_board_info(struct efx_nic *efx, u16 revision_info)
+{
+	int rc = 0;
+	struct efx_board_data *data;
+
+	if (BOARD_TYPE(revision_info) >= EFX_BOARD_MAX) {
+		EFX_ERR(efx, "squashing unknown board type %d\n",
+			BOARD_TYPE(revision_info));
+		revision_info = 0;
+	}
+
+	if (BOARD_TYPE(revision_info) == 0) {
+		efx->board_info.major = 0;
+		efx->board_info.minor = 0;
+		/* For early boards that don't have revision info. there is
+		 * only 1 board for each PHY type, so we can work it out, with
+		 * the exception of the PHY-less boards. */
+		switch (efx->phy_type) {
+		case PHY_TYPE_10XPRESS:
+			efx->board_info.type = EFX_BOARD_SFE4001;
+			break;
+		case PHY_TYPE_XFP:
+			efx->board_info.type = EFX_BOARD_SFE4002;
+			break;
+		default:
+			efx->board_info.type = 0;
+			break;
+		}
+	} else {
+		efx->board_info.type = BOARD_TYPE(revision_info);
+		efx->board_info.major = BOARD_MAJOR(revision_info);
+		efx->board_info.minor = BOARD_MINOR(revision_info);
+	}
+
+	data = &board_data[efx->board_info.type];
+
+	/* Report the board model number or generic type for recognisable
+	 * boards. */
+	if (efx->board_info.type != 0)
+		EFX_INFO(efx, "board is %s rev %c%d\n",
+			 (efx->pci_dev->subsystem_vendor == EFX_VENDID_SFC)
+			 ? data->ref_model : data->gen_type,
+			 'A' + efx->board_info.major, efx->board_info.minor);
+
+	efx->board_info.init = data->init;
+
+	return rc;
+}
diff --git a/drivers/net/sfc/boards.h b/drivers/net/sfc/boards.h
new file mode 100644
index 0000000..f56341d
--- /dev/null
+++ b/drivers/net/sfc/boards.h
@@ -0,0 +1,26 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2007 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_BOARDS_H
+#define EFX_BOARDS_H
+
+/* Board IDs (must fit in 8 bits) */
+enum efx_board_type {
+	EFX_BOARD_INVALID = 0,
+	EFX_BOARD_SFE4001 = 1,   /* SFE4001 (10GBASE-T) */
+	EFX_BOARD_SFE4002 = 2,
+	/* Insert new types before here */
+	EFX_BOARD_MAX
+};
+
+extern int efx_set_board_info(struct efx_nic *efx, u16 revision_info);
+extern int sfe4001_poweron(struct efx_nic *efx);
+extern void sfe4001_poweroff(struct efx_nic *efx);
+
+#endif
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
new file mode 100644
index 0000000..59edcf7
--- /dev/null
+++ b/drivers/net/sfc/efx.c
@@ -0,0 +1,2208 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2005-2008 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+#include <linux/notifier.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/in.h>
+#include <linux/crc32.h>
+#include <linux/ethtool.h>
+#include "net_driver.h"
+#include "gmii.h"
+#include "ethtool.h"
+#include "tx.h"
+#include "rx.h"
+#include "efx.h"
+#include "mdio_10g.h"
+#include "falcon.h"
+#include "workarounds.h"
+#include "mac.h"
+
+#define EFX_MAX_MTU (9 * 1024)
+
+/* RX slow fill workqueue. If memory allocation fails in the fast path,
+ * a work item is pushed onto this work queue to retry the allocation later,
+ * to avoid the NIC being starved of RX buffers. Since this is a per cpu
+ * workqueue, there is nothing to be gained in making it per NIC
+ */
+static struct workqueue_struct *refill_workqueue;
+
+/**************************************************************************
+ *
+ * Configurable values
+ *
+ *************************************************************************/
+
+/*
+ * Enable large receive offload (LRO) aka soft segment reassembly (SSR)
+ *
+ * This sets the default for new devices.  It can be controlled later
+ * using ethtool.
+ */
+static int lro = 1;
+module_param(lro, int, 0644);
+MODULE_PARM_DESC(lro, "Large receive offload acceleration");
+
+/*
+ * Use separate channels for TX and RX events
+ *
+ * Set this to 1 to use separate channels for TX and RX. It allows us to
+ * apply a higher level of interrupt moderation to TX events.
+ *
+ * This is forced to 0 for MSI interrupt mode as the interrupt vector
+ * is not written
+ */
+static unsigned int separate_tx_and_rx_channels = 1;
+
+/* This is the weight assigned to each of the (per-channel) virtual
+ * NAPI devices.
+ */
+static int napi_weight = 64;
+
+/* This is the time (in jiffies) between invocations of the hardware
+ * monitor, which checks for known hardware bugs and resets the
+ * hardware and driver as necessary.
+ */
+unsigned int efx_monitor_interval = 1 * HZ;
+
+/* This controls whether or not the hardware monitor will trigger a
+ * reset when it detects an error condition.
+ */
+static unsigned int monitor_reset = 1;
+
+/* This controls whether or not the driver will initialise devices
+ * with invalid MAC addresses stored in the EEPROM or flash.  If true,
+ * such devices will be initialised with a random locally-generated
+ * MAC address.  This allows for loading the sfc_mtd driver to
+ * reprogram the flash, even if the flash contents (including the MAC
+ * address) have previously been erased.
+ */
+static unsigned int allow_bad_hwaddr;
+
+/* Initial interrupt moderation settings.  They can be modified after
+ * module load with ethtool.
+ *
+ * The default for RX should strike a balance between increasing the
+ * round-trip latency and reducing overhead.
+ */
+static unsigned int rx_irq_mod_usec = 60;
+
+/* Initial interrupt moderation settings.  They can be modified after
+ * module load with ethtool.
+ *
+ * This default is chosen to ensure that a 10G link does not go idle
+ * while a TX queue is stopped after it has become full.  A queue is
+ * restarted when it drops below half full.  The time this takes (assuming
+ * worst case 3 descriptors per packet and 1024 descriptors) is
+ *   512 / 3 * 1.2 = 205 usec.
+ */
+static unsigned int tx_irq_mod_usec = 150;
+
+/* This is the first interrupt mode to try out of:
+ * 0 => MSI-X
+ * 1 => MSI
+ * 2 => legacy
+ */
+static unsigned int interrupt_mode;
+
+/* This is the requested number of CPUs to use for Receive-Side Scaling (RSS),
+ * i.e. the number of CPUs among which we may distribute simultaneous
+ * interrupt handling.
+ *
+ * Cards without MSI-X will only target one CPU via legacy or MSI interrupt.
+ * The default (0) means to assign an interrupt to each package (level II cache)
+ */
+static unsigned int rss_cpus;
+module_param(rss_cpus, uint, 0444);
+MODULE_PARM_DESC(rss_cpus, "Number of CPUs to use for Receive-Side Scaling");
+
+/**************************************************************************
+ *
+ * Utility functions and prototypes
+ *
+ *************************************************************************/
+static void efx_remove_channel(struct efx_channel *channel);
+static void efx_remove_port(struct efx_nic *efx);
+static void efx_fini_napi(struct efx_nic *efx);
+static void efx_fini_channels(struct efx_nic *efx);
+
+#define EFX_ASSERT_RESET_SERIALISED(efx)		\
+	do {						\
+		if ((efx->state == STATE_RUNNING) ||	\
+		    (efx->state == STATE_RESETTING))	\
+			ASSERT_RTNL();			\
+	} while (0)
+
+/**************************************************************************
+ *
+ * Event queue processing
+ *
+ *************************************************************************/
+
+/* Process channel's event queue
+ *
+ * This function is responsible for processing the event queue of a
+ * single channel.  The caller must guarantee that this function will
+ * never be concurrently called more than once on the same channel,
+ * though different channels may be being processed concurrently.
+ */
+static inline int efx_process_channel(struct efx_channel *channel, int rx_quota)
+{
+	int rxdmaqs;
+	struct efx_rx_queue *rx_queue;
+
+	if (unlikely(channel->efx->reset_pending != RESET_TYPE_NONE ||
+		     !channel->enabled))
+		return rx_quota;
+
+	rxdmaqs = falcon_process_eventq(channel, &rx_quota);
+
+	/* Deliver last RX packet. */
+	if (channel->rx_pkt) {
+		__efx_rx_packet(channel, channel->rx_pkt,
+				channel->rx_pkt_csummed);
+		channel->rx_pkt = NULL;
+	}
+
+	efx_flush_lro(channel);
+	efx_rx_strategy(channel);
+
+	/* Refill descriptor rings as necessary */
+	rx_queue = &channel->efx->rx_queue[0];
+	while (rxdmaqs) {
+		if (rxdmaqs & 0x01)
+			efx_fast_push_rx_descriptors(rx_queue);
+		rx_queue++;
+		rxdmaqs >>= 1;
+	}
+
+	return rx_quota;
+}
+
+/* Mark channel as finished processing
+ *
+ * Note that since we will not receive further interrupts for this
+ * channel before we finish processing and call the eventq_read_ack()
+ * method, there is no need to use the interrupt hold-off timers.
+ */
+static inline void efx_channel_processed(struct efx_channel *channel)
+{
+	/* Write to EVQ_RPTR_REG.  If a new event arrived in a race
+	 * with finishing processing, a new interrupt will be raised.
+	 */
+	channel->work_pending = 0;
+	smp_wmb(); /* Ensure channel updated before any new interrupt. */
+	falcon_eventq_read_ack(channel);
+}
+
+/* NAPI poll handler
+ *
+ * NAPI guarantees serialisation of polls of the same device, which
+ * provides the guarantee required by efx_process_channel().
+ */
+static int efx_poll(struct napi_struct *napi, int budget)
+{
+	struct efx_channel *channel =
+		container_of(napi, struct efx_channel, napi_str);
+	struct net_device *napi_dev = channel->napi_dev;
+	int unused;
+	int rx_packets;
+
+	EFX_TRACE(channel->efx, "channel %d NAPI poll executing on CPU %d\n",
+		  channel->channel, raw_smp_processor_id());
+
+	unused = efx_process_channel(channel, budget);
+	rx_packets = (budget - unused);
+
+	if (rx_packets < budget) {
+		/* There is no race here; although napi_disable() will
+		 * only wait for netif_rx_complete(), this isn't a problem
+		 * since efx_channel_processed() will have no effect if
+		 * interrupts have already been disabled.
+		 */
+		netif_rx_complete(napi_dev, napi);
+		efx_channel_processed(channel);
+	}
+
+	return rx_packets;
+}
+
+/* Process the eventq of the specified channel immediately on this CPU
+ *
+ * Disable hardware generated interrupts, wait for any existing
+ * processing to finish, then directly poll (and ack ) the eventq.
+ * Finally reenable NAPI and interrupts.
+ *
+ * Since we are touching interrupts the caller should hold the suspend lock
+ */
+void efx_process_channel_now(struct efx_channel *channel)
+{
+	struct efx_nic *efx = channel->efx;
+
+	BUG_ON(!channel->used_flags);
+	BUG_ON(!channel->enabled);
+
+	/* Disable interrupts and wait for ISRs to complete */
+	falcon_disable_interrupts(efx);
+	if (efx->legacy_irq)
+		synchronize_irq(efx->legacy_irq);
+	if (channel->has_interrupt && channel->irq)
+		synchronize_irq(channel->irq);
+
+	/* Wait for any NAPI processing to complete */
+	napi_disable(&channel->napi_str);
+
+	/* Poll the channel */
+	(void) efx_process_channel(channel, efx->type->evq_size);
+
+	/* Ack the eventq. This may cause an interrupt to be generated
+	 * when they are reenabled */
+	efx_channel_processed(channel);
+
+	napi_enable(&channel->napi_str);
+	falcon_enable_interrupts(efx);
+}
+
+/* Create event queue
+ * Event queue memory allocations are done only once.  If the channel
+ * is reset, the memory buffer will be reused; this guards against
+ * errors during channel reset and also simplifies interrupt handling.
+ */
+static int efx_probe_eventq(struct efx_channel *channel)
+{
+	EFX_LOG(channel->efx, "chan %d create event queue\n", channel->channel);
+
+	return falcon_probe_eventq(channel);
+}
+
+/* Prepare channel's event queue */
+static int efx_init_eventq(struct efx_channel *channel)
+{
+	EFX_LOG(channel->efx, "chan %d init event queue\n", channel->channel);
+
+	channel->eventq_read_ptr = 0;
+
+	return falcon_init_eventq(channel);
+}
+
+static void efx_fini_eventq(struct efx_channel *channel)
+{
+	EFX_LOG(channel->efx, "chan %d fini event queue\n", channel->channel);
+
+	falcon_fini_eventq(channel);
+}
+
+static void efx_remove_eventq(struct efx_channel *channel)
+{
+	EFX_LOG(channel->efx, "chan %d remove event queue\n", channel->channel);
+
+	falcon_remove_eventq(channel);
+}
+
+/**************************************************************************
+ *
+ * Channel handling
+ *
+ *************************************************************************/
+
+/* Setup per-NIC RX buffer parameters.
+ * Calculate the rx buffer allocation parameters required to support
+ * the current MTU, including padding for header alignment and overruns.
+ */
+static void efx_calc_rx_buffer_params(struct efx_nic *efx)
+{
+	unsigned int order, len;
+
+	len = (max(EFX_PAGE_IP_ALIGN, NET_IP_ALIGN) +
+	       EFX_MAX_FRAME_LEN(efx->net_dev->mtu) +
+	       efx->type->rx_buffer_padding);
+
+	/* Calculate page-order */
+	for (order = 0; ((1u << order) * PAGE_SIZE) < len; ++order)
+		;
+
+	efx->rx_buffer_len = len;
+	efx->rx_buffer_order = order;
+}
+
+static int efx_probe_channel(struct efx_channel *channel)
+{
+	struct efx_tx_queue *tx_queue;
+	struct efx_rx_queue *rx_queue;
+	int rc;
+
+	EFX_LOG(channel->efx, "creating channel %d\n", channel->channel);
+
+	rc = efx_probe_eventq(channel);
+	if (rc)
+		goto fail1;
+
+	efx_for_each_channel_tx_queue(tx_queue, channel) {
+		rc = efx_probe_tx_queue(tx_queue);
+		if (rc)
+			goto fail2;
+	}
+
+	efx_for_each_channel_rx_queue(rx_queue, channel) {
+		rc = efx_probe_rx_queue(rx_queue);
+		if (rc)
+			goto fail3;
+	}
+
+	channel->n_rx_frm_trunc = 0;
+
+	return 0;
+
+ fail3:
+	efx_for_each_channel_rx_queue(rx_queue, channel)
+		efx_remove_rx_queue(rx_queue);
+ fail2:
+	efx_for_each_channel_tx_queue(tx_queue, channel)
+		efx_remove_tx_queue(tx_queue);
+ fail1:
+	return rc;
+}
+
+
+/* Channels are shutdown and reinitialised whilst the NIC is running
+ * to propagate configuration changes (mtu, checksum offload), or
+ * to clear hardware error conditions
+ */
+static int efx_init_channels(struct efx_nic *efx)
+{
+	struct efx_tx_queue *tx_queue;
+	struct efx_rx_queue *rx_queue;
+	struct efx_channel *channel;
+	int rc = 0;
+
+	efx_calc_rx_buffer_params(efx);
+
+	/* Initialise the channels */
+	efx_for_each_channel(channel, efx) {
+		EFX_LOG(channel->efx, "init chan %d\n", channel->channel);
+
+		rc = efx_init_eventq(channel);
+		if (rc)
+			goto err;
+
+		efx_for_each_channel_tx_queue(tx_queue, channel) {
+			rc = efx_init_tx_queue(tx_queue);
+			if (rc)
+				goto err;
+		}
+
+		/* The rx buffer allocation strategy is MTU dependent */
+		efx_rx_strategy(channel);
+
+		efx_for_each_channel_rx_queue(rx_queue, channel) {
+			rc = efx_init_rx_queue(rx_queue);
+			if (rc)
+				goto err;
+		}
+
+		WARN_ON(channel->rx_pkt != NULL);
+		efx_rx_strategy(channel);
+	}
+
+	return 0;
+
+ err:
+	EFX_ERR(efx, "failed to initialise channel %d\n",
+		channel ? channel->channel : -1);
+	efx_fini_channels(efx);
+	return rc;
+}
+
+/* This enables event queue processing and packet transmission.
+ *
+ * Note that this function is not allowed to fail, since that would
+ * introduce too much complexity into the suspend/resume path.
+ */
+static void efx_start_channel(struct efx_channel *channel)
+{
+	struct efx_rx_queue *rx_queue;
+
+	EFX_LOG(channel->efx, "starting chan %d\n", channel->channel);
+
+	if (!(channel->efx->net_dev->flags & IFF_UP))
+		netif_napi_add(channel->napi_dev, &channel->napi_str,
+			       efx_poll, napi_weight);
+
+	channel->work_pending = 0;
+	channel->enabled = 1;
+	smp_wmb(); /* ensure channel updated before first interrupt */
+
+	napi_enable(&channel->napi_str);
+
+	/* Load up RX descriptors */
+	efx_for_each_channel_rx_queue(rx_queue, channel)
+		efx_fast_push_rx_descriptors(rx_queue);
+}
+
+/* This disables event queue processing and packet transmission.
+ * This function does not guarantee that all queue processing
+ * (e.g. RX refill) is complete.
+ */
+static void efx_stop_channel(struct efx_channel *channel)
+{
+	struct efx_rx_queue *rx_queue;
+
+	if (!channel->enabled)
+		return;
+
+	EFX_LOG(channel->efx, "stop chan %d\n", channel->channel);
+
+	channel->enabled = 0;
+	napi_disable(&channel->napi_str);
+
+	/* Ensure that any worker threads have exited or will be no-ops */
+	efx_for_each_channel_rx_queue(rx_queue, channel) {
+		spin_lock_bh(&rx_queue->add_lock);
+		spin_unlock_bh(&rx_queue->add_lock);
+	}
+}
+
+static void efx_fini_channels(struct efx_nic *efx)
+{
+	struct efx_channel *channel;
+	struct efx_tx_queue *tx_queue;
+	struct efx_rx_queue *rx_queue;
+
+	EFX_ASSERT_RESET_SERIALISED(efx);
+	BUG_ON(efx->port_enabled);
+
+	efx_for_each_channel(channel, efx) {
+		EFX_LOG(channel->efx, "shut down chan %d\n", channel->channel);
+
+		efx_for_each_channel_rx_queue(rx_queue, channel)
+			efx_fini_rx_queue(rx_queue);
+		efx_for_each_channel_tx_queue(tx_queue, channel)
+			efx_fini_tx_queue(tx_queue);
+	}
+
+	/* Do the event queues last so that we can handle flush events
+	 * for all DMA queues. */
+	efx_for_each_channel(channel, efx) {
+		EFX_LOG(channel->efx, "shut down evq %d\n", channel->channel);
+
+		efx_fini_eventq(channel);
+	}
+}
+
+static void efx_remove_channel(struct efx_channel *channel)
+{
+	struct efx_tx_queue *tx_queue;
+	struct efx_rx_queue *rx_queue;
+
+	EFX_LOG(channel->efx, "destroy chan %d\n", channel->channel);
+
+	efx_for_each_channel_rx_queue(rx_queue, channel)
+		efx_remove_rx_queue(rx_queue);
+	efx_for_each_channel_tx_queue(tx_queue, channel)
+		efx_remove_tx_queue(tx_queue);
+	efx_remove_eventq(channel);
+
+	channel->used_flags = 0;
+}
+
+void efx_schedule_slow_fill(struct efx_rx_queue *rx_queue, int delay)
+{
+	queue_delayed_work(refill_workqueue, &rx_queue->work, delay);
+}
+
+/**************************************************************************
+ *
+ * Port handling
+ *
+ **************************************************************************/
+
+/* This ensures that the kernel is kept informed (via
+ * netif_carrier_on/off) of the link status, and also maintains the
+ * link status's stop on the port's TX queue.
+ */
+static void efx_link_status_changed(struct efx_nic *efx)
+{
+	int carrier_ok;
+
+	/* SFC Bug 5356: A net_dev notifier is registered, so we must ensure
+	 * that no events are triggered between unregister_netdev() and the
+	 * driver unloading. A more general condition is that NETDEV_CHANGE
+	 * can only be generated between NETDEV_UP and NETDEV_DOWN */
+	if (!netif_running(efx->net_dev))
+		return;
+
+	carrier_ok = netif_carrier_ok(efx->net_dev) ? 1 : 0;
+	if (efx->link_up != carrier_ok) {
+		efx->n_link_state_changes++;
+
+		if (efx->link_up)
+			netif_carrier_on(efx->net_dev);
+		else
+			netif_carrier_off(efx->net_dev);
+	}
+
+	/* Status message for kernel log */
+	if (efx->link_up) {
+		struct mii_if_info *gmii = &efx->mii;
+		unsigned adv, lpa;
+		/* NONE here means direct XAUI from the controller, with no
+		 * MDIO-attached device we can query. */
+		if (efx->phy_type != PHY_TYPE_NONE) {
+			adv = gmii_advertised(gmii);
+			lpa = gmii_lpa(gmii);
+		} else {
+			lpa = GM_LPA_10000 | LPA_DUPLEX;
+			adv = lpa;
+		}
+		EFX_INFO(efx, "link up at %dMbps %s-duplex "
+			 "(adv %04x lpa %04x) (MTU %d)%s\n",
+			 (efx->link_options & GM_LPA_10000 ? 10000 :
+			  (efx->link_options & GM_LPA_1000 ? 1000 :
+			   (efx->link_options & GM_LPA_100 ? 100 :
+			    10))),
+			 (efx->link_options & GM_LPA_DUPLEX ?
+			  "full" : "half"),
+			 adv, lpa,
+			 efx->net_dev->mtu,
+			 (efx->promiscuous ? " [PROMISC]" : ""));
+	} else {
+		EFX_INFO(efx, "link down\n");
+	}
+
+}
+
+/* This call reinitialises the MAC to pick up new PHY settings. The
+ * caller must hold the mac_lock */
+static void __efx_reconfigure_port(struct efx_nic *efx)
+{
+	WARN_ON(!mutex_is_locked(&efx->mac_lock));
+
+	EFX_LOG(efx, "reconfiguring MAC from PHY settings on CPU %d\n",
+		raw_smp_processor_id());
+
+	falcon_reconfigure_xmac(efx);
+
+	/* Inform kernel of loss/gain of carrier */
+	efx_link_status_changed(efx);
+}
+
+/* Reinitialise the MAC to pick up new PHY settings, even if the port is
+ * disabled. */
+void efx_reconfigure_port(struct efx_nic *efx)
+{
+	EFX_ASSERT_RESET_SERIALISED(efx);
+
+	mutex_lock(&efx->mac_lock);
+	__efx_reconfigure_port(efx);
+	mutex_unlock(&efx->mac_lock);
+}
+
+/* Asynchronous efx_reconfigure_port work item. To speed up efx_flush_all()
+ * we don't efx_reconfigure_port() if the port is disabled. Care is taken
+ * in efx_stop_all() and efx_start_port() to prevent PHY events being lost */
+static void efx_reconfigure_work(struct work_struct *data)
+{
+	struct efx_nic *efx = container_of(data, struct efx_nic,
+					   reconfigure_work);
+
+	mutex_lock(&efx->mac_lock);
+	if (efx->port_enabled)
+		__efx_reconfigure_port(efx);
+	mutex_unlock(&efx->mac_lock);
+}
+
+static int efx_probe_port(struct efx_nic *efx)
+{
+	int rc;
+
+	EFX_LOG(efx, "create port\n");
+
+	/* Connect up MAC/PHY operations table and read MAC address */
+	rc = falcon_probe_port(efx);
+	if (rc)
+		goto err;
+
+	/* Sanity check MAC address */
+	if (is_valid_ether_addr(efx->mac_address)) {
+		memcpy(efx->net_dev->dev_addr, efx->mac_address, ETH_ALEN);
+	} else {
+		DECLARE_MAC_BUF(mac);
+
+		EFX_ERR(efx, "invalid MAC address %s\n",
+			print_mac(mac, efx->mac_address));
+		if (!allow_bad_hwaddr) {
+			rc = -EINVAL;
+			goto err;
+		}
+		random_ether_addr(efx->net_dev->dev_addr);
+		EFX_INFO(efx, "using locally-generated MAC %s\n",
+			 print_mac(mac, efx->net_dev->dev_addr));
+	}
+
+	return 0;
+
+ err:
+	efx_remove_port(efx);
+	return rc;
+}
+
+static int efx_init_port(struct efx_nic *efx)
+{
+	int rc;
+
+	EFX_LOG(efx, "init port\n");
+
+	/* Initialise the MAC and PHY */
+	rc = falcon_init_xmac(efx);
+	if (rc)
+		return rc;
+
+	efx->port_initialized = 1;
+
+	/* Reconfigure port to program MAC registers */
+	falcon_reconfigure_xmac(efx);
+
+	return 0;
+}
+
+/* Allow efx_reconfigure_port() to be scheduled, and close the window
+ * between efx_stop_port and efx_flush_all whereby a previously scheduled
+ * efx_reconfigure_port() may have been cancelled */
+static void efx_start_port(struct efx_nic *efx)
+{
+	EFX_LOG(efx, "start port\n");
+	BUG_ON(efx->port_enabled);
+
+	mutex_lock(&efx->mac_lock);
+	efx->port_enabled = 1;
+	__efx_reconfigure_port(efx);
+	mutex_unlock(&efx->mac_lock);
+}
+
+/* Prevent efx_reconfigure_work and efx_monitor() from executing, and
+ * efx_set_multicast_list() from scheduling efx_reconfigure_work.
+ * efx_reconfigure_work can still be scheduled via NAPI processing
+ * until efx_flush_all() is called */
+static void efx_stop_port(struct efx_nic *efx)
+{
+	EFX_LOG(efx, "stop port\n");
+
+	mutex_lock(&efx->mac_lock);
+	efx->port_enabled = 0;
+	mutex_unlock(&efx->mac_lock);
+
+	/* Serialise against efx_set_multicast_list() */
+	if (NET_DEV_REGISTERED(efx)) {
+		netif_tx_lock_bh(efx->net_dev);
+		netif_tx_unlock_bh(efx->net_dev);
+	}
+}
+
+static void efx_fini_port(struct efx_nic *efx)
+{
+	EFX_LOG(efx, "shut down port\n");
+
+	if (!efx->port_initialized)
+		return;
+
+	falcon_fini_xmac(efx);
+	efx->port_initialized = 0;
+
+	efx->link_up = 0;
+	efx_link_status_changed(efx);
+}
+
+static void efx_remove_port(struct efx_nic *efx)
+{
+	EFX_LOG(efx, "destroying port\n");
+
+	falcon_remove_port(efx);
+}
+
+/**************************************************************************
+ *
+ * NIC handling
+ *
+ **************************************************************************/
+
+/* This configures the PCI device to enable I/O and DMA. */
+static int efx_init_io(struct efx_nic *efx)
+{
+	struct pci_dev *pci_dev = efx->pci_dev;
+	dma_addr_t dma_mask = efx->type->max_dma_mask;
+	int rc;
+
+	EFX_LOG(efx, "initialising I/O\n");
+
+	rc = pci_enable_device(pci_dev);
+	if (rc) {
+		EFX_ERR(efx, "failed to enable PCI device\n");
+		goto fail1;
+	}
+
+	pci_set_master(pci_dev);
+
+	/* Set the PCI DMA mask.  Try all possibilities from our
+	 * genuine mask down to 32 bits, because some architectures
+	 * (e.g. x86_64 with iommu_sac_force set) will allow 40 bit
+	 * masks event though they reject 46 bit masks.
+	 */
+	while (dma_mask > 0x7fffffffUL) {
+		if (pci_dma_supported(pci_dev, dma_mask) &&
+		    ((rc = pci_set_dma_mask(pci_dev, dma_mask)) == 0))
+			break;
+		dma_mask >>= 1;
+	}
+	if (rc) {
+		EFX_ERR(efx, "could not find a suitable DMA mask\n");
+		goto fail2;
+	}
+	EFX_LOG(efx, "using DMA mask %llx\n", (unsigned long long) dma_mask);
+	rc = pci_set_consistent_dma_mask(pci_dev, dma_mask);
+	if (rc) {
+		/* pci_set_consistent_dma_mask() is not *allowed* to
+		 * fail with a mask that pci_set_dma_mask() accepted,
+		 * but just in case...
+		 */
+		EFX_ERR(efx, "failed to set consistent DMA mask\n");
+		goto fail2;
+	}
+
+	efx->membase_phys = pci_resource_start(efx->pci_dev,
+					       efx->type->mem_bar);
+	rc = pci_request_region(pci_dev, efx->type->mem_bar, "sfc");
+	if (rc) {
+		EFX_ERR(efx, "request for memory BAR failed\n");
+		rc = -EIO;
+		goto fail3;
+	}
+	efx->membase = ioremap_nocache(efx->membase_phys,
+				       efx->type->mem_map_size);
+	if (!efx->membase) {
+		EFX_ERR(efx, "could not map memory BAR %d at %lx+%x\n",
+			efx->type->mem_bar, efx->membase_phys,
+			efx->type->mem_map_size);
+		rc = -ENOMEM;
+		goto fail4;
+	}
+	EFX_LOG(efx, "memory BAR %u at %lx+%x (virtual %p)\n",
+		efx->type->mem_bar, efx->membase_phys, efx->type->mem_map_size,
+		efx->membase);
+
+	return 0;
+
+ fail4:
+	release_mem_region(efx->membase_phys, efx->type->mem_map_size);
+ fail3:
+	efx->membase_phys = 0UL;
+ fail2:
+	pci_disable_device(efx->pci_dev);
+ fail1:
+	return rc;
+}
+
+static void efx_fini_io(struct efx_nic *efx)
+{
+	EFX_LOG(efx, "shutting down I/O\n");
+
+	if (efx->membase) {
+		iounmap(efx->membase);
+		efx->membase = NULL;
+	}
+
+	if (efx->membase_phys) {
+		pci_release_region(efx->pci_dev, efx->type->mem_bar);
+		efx->membase_phys = 0UL;
+	}
+
+	pci_disable_device(efx->pci_dev);
+}
+
+/* Probe the number and type of interrupts we are able to obtain. */
+static void efx_probe_interrupts(struct efx_nic *efx)
+{
+	int max_channel = efx->type->phys_addr_channels - 1;
+	struct msix_entry xentries[EFX_MAX_CHANNELS];
+	int rc, i;
+
+	if (efx->interrupt_mode == EFX_INT_MODE_MSIX) {
+		BUG_ON(!pci_find_capability(efx->pci_dev, PCI_CAP_ID_MSIX));
+
+		efx->rss_queues = rss_cpus ? rss_cpus : num_online_cpus();
+		efx->rss_queues = min(efx->rss_queues, max_channel + 1);
+		efx->rss_queues = min(efx->rss_queues, EFX_MAX_CHANNELS);
+
+		/* Request maximum number of MSI interrupts, and fill out
+		 * the channel interrupt information the allowed allocation */
+		for (i = 0; i < efx->rss_queues; i++)
+			xentries[i].entry = i;
+		rc = pci_enable_msix(efx->pci_dev, xentries, efx->rss_queues);
+		if (rc > 0) {
+			EFX_BUG_ON_PARANOID(rc >= efx->rss_queues);
+			efx->rss_queues = rc;
+			rc = pci_enable_msix(efx->pci_dev, xentries,
+					     efx->rss_queues);
+		}
+
+		if (rc == 0) {
+			for (i = 0; i < efx->rss_queues; i++) {
+				efx->channel[i].has_interrupt = 1;
+				efx->channel[i].irq = xentries[i].vector;
+			}
+		} else {
+			/* Fall back to single channel MSI */
+			efx->interrupt_mode = EFX_INT_MODE_MSI;
+			EFX_ERR(efx, "could not enable MSI-X\n");
+		}
+	}
+
+	/* Try single interrupt MSI */
+	if (efx->interrupt_mode == EFX_INT_MODE_MSI) {
+		efx->rss_queues = 1;
+		rc = pci_enable_msi(efx->pci_dev);
+		if (rc == 0) {
+			efx->channel[0].irq = efx->pci_dev->irq;
+			efx->channel[0].has_interrupt = 1;
+		} else {
+			EFX_ERR(efx, "could not enable MSI\n");
+			efx->interrupt_mode = EFX_INT_MODE_LEGACY;
+		}
+	}
+
+	/* Assume legacy interrupts */
+	if (efx->interrupt_mode == EFX_INT_MODE_LEGACY) {
+		efx->rss_queues = 1;
+		/* Every channel is interruptible */
+		for (i = 0; i < EFX_MAX_CHANNELS; i++)
+			efx->channel[i].has_interrupt = 1;
+		efx->legacy_irq = efx->pci_dev->irq;
+	}
+}
+
+static void efx_remove_interrupts(struct efx_nic *efx)
+{
+	struct efx_channel *channel;
+
+	/* Remove MSI/MSI-X interrupts */
+	efx_for_each_channel_with_interrupt(channel, efx)
+		channel->irq = 0;
+	pci_disable_msi(efx->pci_dev);
+	pci_disable_msix(efx->pci_dev);
+
+	/* Remove legacy interrupt */
+	efx->legacy_irq = 0;
+}
+
+/* Select number of used resources
+ * Should be called after probe_interrupts()
+ */
+static void efx_select_used(struct efx_nic *efx)
+{
+	struct efx_tx_queue *tx_queue;
+	struct efx_rx_queue *rx_queue;
+	int i;
+
+	/* TX queues.  One per port per channel with TX capability
+	 * (more than one per port won't work on Linux, due to out
+	 *  of order issues... but will be fine on Solaris)
+	 */
+	tx_queue = &efx->tx_queue[0];
+
+	/* Perform this for each channel with TX capabilities.
+	 * At the moment, we only support a single TX queue
+	 */
+	tx_queue->used = 1;
+	if ((!EFX_INT_MODE_USE_MSI(efx)) && separate_tx_and_rx_channels)
+		tx_queue->channel = &efx->channel[1];
+	else
+		tx_queue->channel = &efx->channel[0];
+	tx_queue->channel->used_flags |= EFX_USED_BY_TX;
+	tx_queue++;
+
+	/* RX queues.  Each has a dedicated channel. */
+	for (i = 0; i < EFX_MAX_RX_QUEUES; i++) {
+		rx_queue = &efx->rx_queue[i];
+
+		if (i < efx->rss_queues) {
+			rx_queue->used = 1;
+			/* If we allow multiple RX queues per channel
+			 * we need to decide that here
+			 */
+			rx_queue->channel = &efx->channel[rx_queue->queue];
+			rx_queue->channel->used_flags |= EFX_USED_BY_RX;
+			rx_queue++;
+		}
+	}
+}
+
+static int efx_probe_nic(struct efx_nic *efx)
+{
+	int rc;
+
+	EFX_LOG(efx, "creating NIC\n");
+
+	/* Carry out hardware-type specific initialisation */
+	rc = falcon_probe_nic(efx);
+	if (rc)
+		return rc;
+
+	/* Determine the number of channels and RX queues by trying to hook
+	 * in MSI-X interrupts. */
+	efx_probe_interrupts(efx);
+
+	/* Determine number of RX queues and TX queues */
+	efx_select_used(efx);
+
+	/* Initialise the interrupt moderation settings */
+	efx_init_irq_moderation(efx, tx_irq_mod_usec, rx_irq_mod_usec);
+
+	return 0;
+}
+
+static void efx_remove_nic(struct efx_nic *efx)
+{
+	EFX_LOG(efx, "destroying NIC\n");
+
+	efx_remove_interrupts(efx);
+	falcon_remove_nic(efx);
+}
+
+/**************************************************************************
+ *
+ * NIC startup/shutdown
+ *
+ *************************************************************************/
+
+static int efx_probe_all(struct efx_nic *efx)
+{
+	struct efx_channel *channel;
+	int rc;
+
+	/* Create NIC */
+	rc = efx_probe_nic(efx);
+	if (rc) {
+		EFX_ERR(efx, "failed to create NIC\n");
+		goto fail1;
+	}
+
+	/* Create port */
+	rc = efx_probe_port(efx);
+	if (rc) {
+		EFX_ERR(efx, "failed to create port\n");
+		goto fail2;
+	}
+
+	/* Create channels */
+	efx_for_each_channel(channel, efx) {
+		rc = efx_probe_channel(channel);
+		if (rc) {
+			EFX_ERR(efx, "failed to create channel %d\n",
+				channel->channel);
+			goto fail3;
+		}
+	}
+
+	return 0;
+
+ fail3:
+	efx_for_each_channel(channel, efx)
+		efx_remove_channel(channel);
+	efx_remove_port(efx);
+ fail2:
+	efx_remove_nic(efx);
+ fail1:
+	return rc;
+}
+
+/* Called after previous invocation(s) of efx_stop_all, restarts the
+ * port, kernel transmit queue, NAPI processing and hardware interrupts,
+ * and ensures that the port is scheduled to be reconfigured.
+ * This function is safe to call multiple times when the NIC is in any
+ * state. */
+static void efx_start_all(struct efx_nic *efx)
+{
+	struct efx_channel *channel;
+
+	EFX_ASSERT_RESET_SERIALISED(efx);
+
+	/* Check that it is appropriate to restart the interface. All
+	 * of these flags are safe to read under just the rtnl lock */
+	if (efx->port_enabled)
+		return;
+	if ((efx->state != STATE_RUNNING) && (efx->state != STATE_INIT))
+		return;
+	if (NET_DEV_REGISTERED(efx) && !netif_running(efx->net_dev))
+		return;
+
+	/* Mark the port as enabled so port reconfigurations can start, then
+	 * restart the transmit interface early so the watchdog timer stops */
+	efx_start_port(efx);
+	efx_wake_queue(efx);
+
+	efx_for_each_channel(channel, efx)
+		efx_start_channel(channel);
+
+	falcon_enable_interrupts(efx);
+
+	/* Start hardware monitor if we're in RUNNING */
+	if (efx->state == STATE_RUNNING)
+		queue_delayed_work(efx->workqueue, &efx->monitor_work,
+				   efx_monitor_interval);
+}
+
+/* Flush all delayed work. Should only be called when no more delayed work
+ * will be scheduled. This doesn't flush pending online resets (efx_reset),
+ * since we're holding the rtnl_lock at this point. */
+static void efx_flush_all(struct efx_nic *efx)
+{
+	struct efx_rx_queue *rx_queue;
+
+	/* Make sure the hardware monitor is stopped */
+	cancel_delayed_work_sync(&efx->monitor_work);
+
+	/* Ensure that all RX slow refills are complete. */
+	efx_for_each_rx_queue(rx_queue, efx) {
+		cancel_delayed_work_sync(&rx_queue->work);
+	}
+
+	/* Stop scheduled port reconfigurations */
+	cancel_work_sync(&efx->reconfigure_work);
+
+}
+
+/* Quiesce hardware and software without bringing the link down.
+ * Safe to call multiple times, when the nic and interface is in any
+ * state. The caller is guaranteed to subsequently be in a position
+ * to modify any hardware and software state they see fit without
+ * taking locks. */
+static void efx_stop_all(struct efx_nic *efx)
+{
+	struct efx_channel *channel;
+
+	EFX_ASSERT_RESET_SERIALISED(efx);
+
+	/* port_enabled can be read safely under the rtnl lock */
+	if (!efx->port_enabled)
+		return;
+
+	/* Disable interrupts and wait for ISR to complete */
+	falcon_disable_interrupts(efx);
+	if (efx->legacy_irq)
+		synchronize_irq(efx->legacy_irq);
+	efx_for_each_channel_with_interrupt(channel, efx)
+		if (channel->irq)
+			synchronize_irq(channel->irq);
+
+	/* Stop all NAPI processing and synchronous rx refills */
+	efx_for_each_channel(channel, efx)
+		efx_stop_channel(channel);
+
+	/* Stop all asynchronous port reconfigurations. Since all
+	 * event processing has already been stopped, there is no
+	 * window to loose phy events */
+	efx_stop_port(efx);
+
+	/* Flush reconfigure_work, refill_workqueue, monitor_work */
+	efx_flush_all(efx);
+
+	/* Isolate the MAC from the TX and RX engines, so that queue
+	 * flushes will complete in a timely fashion. */
+	falcon_deconfigure_mac_wrapper(efx);
+	falcon_drain_tx_fifo(efx);
+
+	/* Stop the kernel transmit interface late, so the watchdog
+	 * timer isn't ticking over the flush */
+	efx_stop_queue(efx);
+	if (NET_DEV_REGISTERED(efx)) {
+		netif_tx_lock_bh(efx->net_dev);
+		netif_tx_unlock_bh(efx->net_dev);
+	}
+}
+
+static void efx_remove_all(struct efx_nic *efx)
+{
+	struct efx_channel *channel;
+
+	efx_for_each_channel(channel, efx)
+		efx_remove_channel(channel);
+	efx_remove_port(efx);
+	efx_remove_nic(efx);
+}
+
+/* A convinience function to safely flush all the queues */
+int efx_flush_queues(struct efx_nic *efx)
+{
+	int rc;
+
+	EFX_ASSERT_RESET_SERIALISED(efx);
+
+	efx_stop_all(efx);
+
+	efx_fini_channels(efx);
+	rc = efx_init_channels(efx);
+	if (rc) {
+		efx_schedule_reset(efx, RESET_TYPE_DISABLE);
+		return rc;
+	}
+
+	efx_start_all(efx);
+
+	return 0;
+}
+
+/**************************************************************************
+ *
+ * Interrupt moderation
+ *
+ **************************************************************************/
+
+/* Set interrupt moderation parameters */
+void efx_init_irq_moderation(struct efx_nic *efx, int tx_usecs, int rx_usecs)
+{
+	struct efx_tx_queue *tx_queue;
+	struct efx_rx_queue *rx_queue;
+
+	EFX_ASSERT_RESET_SERIALISED(efx);
+
+	efx_for_each_tx_queue(tx_queue, efx)
+		tx_queue->channel->irq_moderation = tx_usecs;
+
+	efx_for_each_rx_queue(rx_queue, efx)
+		rx_queue->channel->irq_moderation = rx_usecs;
+}
+
+/**************************************************************************
+ *
+ * Hardware monitor
+ *
+ **************************************************************************/
+
+/* Run periodically off the general workqueue. Serialised against
+ * efx_reconfigure_port via the mac_lock */
+static void efx_monitor(struct work_struct *data)
+{
+	struct efx_nic *efx = container_of(data, struct efx_nic,
+					   monitor_work.work);
+	int rc = 0;
+
+	EFX_TRACE(efx, "hardware monitor executing on CPU %d\n",
+		  raw_smp_processor_id());
+
+
+	/* If the mac_lock is already held then it is likely a port
+	 * reconfiguration is already in place, which will likely do
+	 * most of the work of check_hw() anyway. */
+	if (!mutex_trylock(&efx->mac_lock)) {
+		queue_delayed_work(efx->workqueue, &efx->monitor_work,
+				   efx_monitor_interval);
+		return;
+	}
+
+	if (efx->port_enabled)
+		rc = falcon_check_xmac(efx);
+	mutex_unlock(&efx->mac_lock);
+
+	if (rc) {
+		if (monitor_reset) {
+			EFX_ERR(efx, "hardware monitor detected a fault: "
+				"triggering reset\n");
+			efx_schedule_reset(efx, RESET_TYPE_MONITOR);
+		} else {
+			EFX_ERR(efx, "hardware monitor detected a fault, "
+				"skipping reset\n");
+		}
+	}
+
+	queue_delayed_work(efx->workqueue, &efx->monitor_work,
+			   efx_monitor_interval);
+}
+
+/**************************************************************************
+ *
+ * ioctls
+ *
+ *************************************************************************/
+
+/* Net device ioctl
+ * Context: process, rtnl_lock() held.
+ */
+static int efx_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd)
+{
+	struct efx_nic *efx = net_dev->priv;
+
+	EFX_ASSERT_RESET_SERIALISED(efx);
+
+	return generic_mii_ioctl(&efx->mii, if_mii(ifr), cmd, NULL);
+}
+
+/**************************************************************************
+ *
+ * NAPI interface
+ *
+ **************************************************************************/
+
+static int efx_init_napi(struct efx_nic *efx)
+{
+	struct efx_channel *channel;
+	int rc;
+
+	efx_for_each_channel(channel, efx) {
+		channel->napi_dev = efx->net_dev;
+		rc = efx_lro_init(&channel->lro_mgr, efx);
+		if (rc)
+			goto err;
+	}
+	return 0;
+ err:
+	efx_fini_napi(efx);
+	return rc;
+}
+
+static void efx_fini_napi(struct efx_nic *efx)
+{
+	struct efx_channel *channel;
+
+	efx_for_each_channel(channel, efx) {
+		efx_lro_fini(&channel->lro_mgr);
+		channel->napi_dev = NULL;
+	}
+}
+
+/**************************************************************************
+ *
+ * Kernel netpoll interface
+ *
+ *************************************************************************/
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+
+/* Although in the common case interrupts will be disabled, this is not
+ * guaranteed. However, all our work happens inside the NAPI callback,
+ * so no locking is required.
+ */
+static void efx_netpoll(struct net_device *net_dev)
+{
+	struct efx_nic *efx = net_dev->priv;
+	struct efx_channel *channel;
+
+	efx_for_each_channel_with_interrupt(channel, efx)
+		efx_schedule_channel(channel);
+}
+
+#endif
+
+/**************************************************************************
+ *
+ * Kernel net device interface
+ *
+ *************************************************************************/
+
+/* Context: process, rtnl_lock() held. */
+static int efx_net_open(struct net_device *net_dev)
+{
+	struct efx_nic *efx = net_dev->priv;
+	EFX_ASSERT_RESET_SERIALISED(efx);
+
+	EFX_LOG(efx, "opening device %s on CPU %d\n", net_dev->name,
+		raw_smp_processor_id());
+
+	efx_start_all(efx);
+	return 0;
+}
+
+/* Context: process, rtnl_lock() held.
+ * Note that the kernel will ignore our return code; this method
+ * should really be a void.
+ */
+static int efx_net_stop(struct net_device *net_dev)
+{
+	struct efx_nic *efx = net_dev->priv;
+	int rc;
+
+	EFX_LOG(efx, "closing %s on CPU %d\n", net_dev->name,
+		raw_smp_processor_id());
+
+	/* Stop the device and flush all the channels */
+	efx_stop_all(efx);
+	efx_fini_channels(efx);
+	rc = efx_init_channels(efx);
+	if (rc)
+		efx_schedule_reset(efx, RESET_TYPE_DISABLE);
+
+	return 0;
+}
+
+/* Context: process, dev_base_lock held, non-blocking. */
+static struct net_device_stats *efx_net_stats(struct net_device *net_dev)
+{
+	struct efx_nic *efx = net_dev->priv;
+	struct efx_mac_stats *mac_stats = &efx->mac_stats;
+	struct net_device_stats *stats = &net_dev->stats;
+
+	if (!spin_trylock(&efx->stats_lock))
+		return stats;
+	if (efx->state == STATE_RUNNING) {
+		falcon_update_stats_xmac(efx);
+		falcon_update_nic_stats(efx);
+	}
+	spin_unlock(&efx->stats_lock);
+
+	stats->rx_packets = mac_stats->rx_packets;
+	stats->tx_packets = mac_stats->tx_packets;
+	stats->rx_bytes = mac_stats->rx_bytes;
+	stats->tx_bytes = mac_stats->tx_bytes;
+	stats->multicast = mac_stats->rx_multicast;
+	stats->collisions = mac_stats->tx_collision;
+	stats->rx_length_errors = (mac_stats->rx_gtjumbo +
+				   mac_stats->rx_length_error);
+	stats->rx_over_errors = efx->n_rx_nodesc_drop_cnt;
+	stats->rx_crc_errors = mac_stats->rx_bad;
+	stats->rx_frame_errors = mac_stats->rx_align_error;
+	stats->rx_fifo_errors = mac_stats->rx_overflow;
+	stats->rx_missed_errors = mac_stats->rx_missed;
+	stats->tx_window_errors = mac_stats->tx_late_collision;
+
+	stats->rx_errors = (stats->rx_length_errors +
+			    stats->rx_over_errors +
+			    stats->rx_crc_errors +
+			    stats->rx_frame_errors +
+			    stats->rx_fifo_errors +
+			    stats->rx_missed_errors +
+			    mac_stats->rx_symbol_error);
+	stats->tx_errors = (stats->tx_window_errors +
+			    mac_stats->tx_bad);
+
+	return stats;
+}
+
+/* Context: netif_tx_lock held, BHs disabled. */
+static void efx_watchdog(struct net_device *net_dev)
+{
+	struct efx_nic *efx = net_dev->priv;
+
+	EFX_ERR(efx, "TX stuck with stop_count=%d port_enabled=%d: %s\n",
+		atomic_read(&efx->netif_stop_count), efx->port_enabled,
+		monitor_reset ? "resetting channels" : "skipping reset");
+
+	if (monitor_reset)
+		efx_schedule_reset(efx, RESET_TYPE_MONITOR);
+}
+
+
+/* Context: process, rtnl_lock() held. */
+static int efx_change_mtu(struct net_device *net_dev, int new_mtu)
+{
+	struct efx_nic *efx = net_dev->priv;
+	int rc = 0;
+
+	EFX_ASSERT_RESET_SERIALISED(efx);
+
+	if (new_mtu > EFX_MAX_MTU)
+		return -EINVAL;
+
+	efx_stop_all(efx);
+
+	EFX_LOG(efx, "changing MTU to %d\n", new_mtu);
+
+	efx_fini_channels(efx);
+	net_dev->mtu = new_mtu;
+	rc = efx_init_channels(efx);
+	if (rc)
+		goto fail;
+
+	efx_start_all(efx);
+	return rc;
+
+ fail:
+	efx_schedule_reset(efx, RESET_TYPE_DISABLE);
+	return rc;
+}
+
+static int efx_set_mac_address(struct net_device *net_dev, void *data)
+{
+	struct efx_nic *efx = net_dev->priv;
+	struct sockaddr *addr = data;
+	char *new_addr = addr->sa_data;
+
+	EFX_ASSERT_RESET_SERIALISED(efx);
+
+	if (!is_valid_ether_addr(new_addr)) {
+		DECLARE_MAC_BUF(mac);
+		EFX_ERR(efx, "invalid ethernet MAC address requested: %s\n",
+			print_mac(mac, new_addr));
+		return -EINVAL;
+	}
+
+	memcpy(net_dev->dev_addr, new_addr, net_dev->addr_len);
+
+	/* Reconfigure the MAC */
+	efx_reconfigure_port(efx);
+
+	return 0;
+}
+
+/* Context: netif_tx_lock held, BHs disabled. */
+static void efx_set_multicast_list(struct net_device *net_dev)
+{
+	struct efx_nic *efx = net_dev->priv;
+	struct dev_mc_list *mc_list = net_dev->mc_list;
+	union efx_multicast_hash *mc_hash = &efx->multicast_hash;
+	int promiscuous;
+	u32 crc;
+	int bit;
+	int i;
+
+	/* Set per-MAC promiscuity flag and reconfigure MAC if necessary */
+	promiscuous = (net_dev->flags & IFF_PROMISC) ? 1 : 0;
+	if (efx->promiscuous != promiscuous) {
+		efx->promiscuous = promiscuous;
+		/* Close the window between efx_stop_port() and efx_flush_all()
+		 * by only queuing work when the port is enabled. */
+		if (efx->port_enabled)
+			queue_work(efx->workqueue, &efx->reconfigure_work);
+	}
+
+	/* Build multicast hash table */
+	if (promiscuous || (net_dev->flags & IFF_ALLMULTI)) {
+		memset(mc_hash, 0xff, sizeof(*mc_hash));
+	} else {
+		memset(mc_hash, 0x00, sizeof(*mc_hash));
+		for (i = 0; i < net_dev->mc_count; i++) {
+			crc = ether_crc_le(ETH_ALEN, mc_list->dmi_addr);
+			bit = crc & (EFX_MCAST_HASH_ENTRIES - 1);
+			set_bit_le(bit, mc_hash->byte);
+			mc_list = mc_list->next;
+		}
+	}
+
+	/* Create and activate new global multicast hash table */
+	falcon_set_multicast_hash(efx);
+}
+
+static int efx_netdev_event(struct notifier_block *this,
+			    unsigned long event, void *ptr)
+{
+	struct net_device *net_dev = (struct net_device *)ptr;
+
+	if (net_dev->open == efx_net_open && event == NETDEV_CHANGENAME) {
+		struct efx_nic *efx = net_dev->priv;
+
+		strcpy(efx->name, net_dev->name);
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block efx_netdev_notifier = {
+	.notifier_call = efx_netdev_event,
+};
+
+static int efx_register_netdev(struct efx_nic *efx)
+{
+	struct net_device *net_dev = efx->net_dev;
+	int rc;
+
+	net_dev->watchdog_timeo = 5 * HZ;
+	net_dev->irq = efx->pci_dev->irq;
+	net_dev->open = efx_net_open;
+	net_dev->stop = efx_net_stop;
+	net_dev->get_stats = efx_net_stats;
+	net_dev->tx_timeout = &efx_watchdog;
+	net_dev->hard_start_xmit = efx_hard_start_xmit;
+	net_dev->do_ioctl = efx_ioctl;
+	net_dev->change_mtu = efx_change_mtu;
+	net_dev->set_mac_address = efx_set_mac_address;
+	net_dev->set_multicast_list = efx_set_multicast_list;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	net_dev->poll_controller = efx_netpoll;
+#endif
+	SET_NETDEV_DEV(net_dev, &efx->pci_dev->dev);
+	SET_ETHTOOL_OPS(net_dev, &efx_ethtool_ops);
+
+	/* Always start with carrier off; PHY events will detect the link */
+	netif_carrier_off(efx->net_dev);
+
+	/* Clear MAC statistics */
+	falcon_update_stats_xmac(efx);
+	memset(&efx->mac_stats, 0, sizeof(efx->mac_stats));
+
+	rc = register_netdev(net_dev);
+	if (rc) {
+		EFX_ERR(efx, "could not register net dev\n");
+		return rc;
+	}
+	strcpy(efx->name, net_dev->name);
+
+	return 0;
+}
+
+static void efx_unregister_netdev(struct efx_nic *efx)
+{
+	struct efx_tx_queue *tx_queue;
+
+	if (!efx->net_dev)
+		return;
+
+	BUG_ON(efx->net_dev->priv != efx);
+
+	/* Free up any skbs still remaining. This has to happen before
+	 * we try to unregister the netdev as running their destructors
+	 * may be needed to get the device ref. count to 0. */
+	efx_for_each_tx_queue(tx_queue, efx)
+		efx_release_tx_buffers(tx_queue);
+
+	if (NET_DEV_REGISTERED(efx)) {
+		strlcpy(efx->name, pci_name(efx->pci_dev), sizeof(efx->name));
+		unregister_netdev(efx->net_dev);
+	}
+}
+
+/**************************************************************************
+ *
+ * Device reset and suspend
+ *
+ **************************************************************************/
+
+/* The final hardware and software finalisation before reset. */
+static int efx_reset_down(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+{
+	int rc;
+
+	EFX_ASSERT_RESET_SERIALISED(efx);
+
+	rc = falcon_xmac_get_settings(efx, ecmd);
+	if (rc) {
+		EFX_ERR(efx, "could not back up PHY settings\n");
+		goto fail;
+	}
+
+	efx_fini_channels(efx);
+	return 0;
+
+ fail:
+	return rc;
+}
+
+/* The first part of software initialisation after a hardware reset
+ * This function does not handle serialisation with the kernel, it
+ * assumes the caller has done this */
+static int efx_reset_up(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+{
+	int rc;
+
+	rc = efx_init_channels(efx);
+	if (rc)
+		goto fail1;
+
+	/* Restore MAC and PHY settings. */
+	rc = falcon_xmac_set_settings(efx, ecmd);
+	if (rc) {
+		EFX_ERR(efx, "could not restore PHY settings\n");
+		goto fail2;
+	}
+
+	return 0;
+
+ fail2:
+	efx_fini_channels(efx);
+ fail1:
+	return rc;
+}
+
+/* Reset the NIC as transparently as possible. Do not reset the PHY
+ * Note that the reset may fail, in which case the card will be left
+ * in a most-probably-unusable state.
+ *
+ * This function will sleep.  You cannot reset from within an atomic
+ * state; use efx_schedule_reset() instead.
+ *
+ * Grabs the rtnl_lock.
+ */
+static int efx_reset(struct efx_nic *efx)
+{
+	struct ethtool_cmd ecmd;
+	enum reset_type method = efx->reset_pending;
+	int rc;
+
+	/* Serialise with kernel interfaces */
+	rtnl_lock();
+
+	/* If we're not RUNNING then don't reset. Leave the reset_pending
+	 * flag set so that efx_pci_probe_main will be retried */
+	if (efx->state != STATE_RUNNING) {
+		EFX_INFO(efx, "scheduled reset quenched. NIC not RUNNING\n");
+		goto unlock_rtnl;
+	}
+
+	efx->state = STATE_RESETTING;
+	EFX_INFO(efx, "resetting (%d)\n", method);
+
+	/* The net_dev->get_stats handler is quite slow, and will fail
+	 * if a fetch is pending over reset. Serialise against it. */
+	spin_lock(&efx->stats_lock);
+	spin_unlock(&efx->stats_lock);
+
+	efx_stop_all(efx);
+	mutex_lock(&efx->mac_lock);
+
+	rc = efx_reset_down(efx, &ecmd);
+	if (rc)
+		goto fail1;
+
+	rc = falcon_reset_hw(efx, method);
+	if (rc) {
+		EFX_ERR(efx, "failed to reset hardware\n");
+		goto fail2;
+	}
+
+	/* Allow resets to be rescheduled. */
+	efx->reset_pending = RESET_TYPE_NONE;
+
+	/* Reinitialise bus-mastering, which may have been turned off before
+	 * the reset was scheduled. This is still appropriate, even in the
+	 * RESET_TYPE_DISABLE since this driver generally assumes the hardware
+	 * can respond to requests. */
+	pci_set_master(efx->pci_dev);
+
+	/* Reinitialise device. This is appropriate in the RESET_TYPE_DISABLE
+	 * case so the driver can talk to external SRAM */
+	rc = falcon_init_nic(efx);
+	if (rc) {
+		EFX_ERR(efx, "failed to initialise NIC\n");
+		goto fail3;
+	}
+
+	/* Leave device stopped if necessary */
+	if (method == RESET_TYPE_DISABLE) {
+		/* Reinitialise the device anyway so the driver unload sequence
+		 * can talk to the external SRAM */
+		(void) falcon_init_nic(efx);
+		rc = -EIO;
+		goto fail4;
+	}
+
+	rc = efx_reset_up(efx, &ecmd);
+	if (rc)
+		goto fail5;
+
+	mutex_unlock(&efx->mac_lock);
+	EFX_LOG(efx, "reset complete\n");
+
+	efx->state = STATE_RUNNING;
+	efx_start_all(efx);
+
+ unlock_rtnl:
+	rtnl_unlock();
+	return 0;
+
+ fail5:
+ fail4:
+ fail3:
+ fail2:
+ fail1:
+	EFX_ERR(efx, "has been disabled\n");
+	efx->state = STATE_DISABLED;
+
+	mutex_unlock(&efx->mac_lock);
+	rtnl_unlock();
+	efx_unregister_netdev(efx);
+	efx_fini_port(efx);
+	return rc;
+}
+
+/* The worker thread exists so that code that cannot sleep can
+ * schedule a reset for later.
+ */
+static void efx_reset_work(struct work_struct *data)
+{
+	struct efx_nic *nic = container_of(data, struct efx_nic, reset_work);
+
+	efx_reset(nic);
+}
+
+void efx_schedule_reset(struct efx_nic *efx, enum reset_type type)
+{
+	enum reset_type method;
+
+	if (efx->reset_pending != RESET_TYPE_NONE) {
+		EFX_INFO(efx, "quenching already scheduled reset\n");
+		return;
+	}
+
+	switch (type) {
+	case RESET_TYPE_INVISIBLE:
+	case RESET_TYPE_ALL:
+	case RESET_TYPE_WORLD:
+	case RESET_TYPE_DISABLE:
+		method = type;
+		break;
+	case RESET_TYPE_RX_RECOVERY:
+	case RESET_TYPE_RX_DESC_FETCH:
+	case RESET_TYPE_TX_DESC_FETCH:
+	case RESET_TYPE_TX_SKIP:
+		method = RESET_TYPE_INVISIBLE;
+		break;
+	default:
+		method = RESET_TYPE_ALL;
+		break;
+	}
+
+	if (method != type)
+		EFX_LOG(efx, "scheduling reset (%d:%d)\n", type, method);
+	else
+		EFX_LOG(efx, "scheduling reset (%d)\n", method);
+
+	efx->reset_pending = method;
+
+	queue_work(efx->workqueue, &efx->reset_work);
+}
+
+/**************************************************************************
+ *
+ * List of NICs we support
+ *
+ **************************************************************************/
+
+/* PCI device ID table */
+static struct pci_device_id efx_pci_table[] __devinitdata = {
+	{PCI_DEVICE(EFX_VENDID_SFC, FALCON_A_P_DEVID),
+	 .driver_data = (unsigned long) &falcon_a_nic_type},
+	{PCI_DEVICE(EFX_VENDID_SFC, FALCON_B_P_DEVID),
+	 .driver_data = (unsigned long) &falcon_b_nic_type},
+	{0}			/* end of list */
+};
+
+/**************************************************************************
+ *
+ * Dummy PHY/MAC/Board operations
+ *
+ * Can be used where the MAC does not implement this operation
+ * Needed so all function pointers are valid and do not have to be tested
+ * before use
+ *
+ **************************************************************************/
+int efx_port_dummy_op_int(struct efx_nic *efx)
+{
+	return 0;
+}
+void efx_port_dummy_op_void(struct efx_nic *efx) {}
+void efx_port_dummy_op_blink(struct efx_nic *efx, int blink) {}
+
+static struct efx_phy_operations efx_dummy_phy_operations = {
+	.init		 = efx_port_dummy_op_int,
+	.reconfigure	 = efx_port_dummy_op_void,
+	.check_hw        = efx_port_dummy_op_int,
+	.fini		 = efx_port_dummy_op_void,
+	.clear_interrupt = efx_port_dummy_op_void,
+	.reset_xaui      = efx_port_dummy_op_void,
+};
+
+/* Dummy board operations */
+static int efx_nic_dummy_op_int(struct efx_nic *nic)
+{
+	return 0;
+}
+
+static struct efx_board efx_dummy_board_info = {
+	.init    = efx_nic_dummy_op_int,
+	.init_leds = efx_port_dummy_op_int,
+	.set_fault_led = efx_port_dummy_op_blink,
+};
+
+/**************************************************************************
+ *
+ * Data housekeeping
+ *
+ **************************************************************************/
+
+/* This zeroes out and then fills in the invariants in a struct
+ * efx_nic (including all sub-structures).
+ */
+static int efx_init_struct(struct efx_nic *efx, struct efx_nic_type *type,
+			   struct pci_dev *pci_dev, struct net_device *net_dev)
+{
+	struct efx_channel *channel;
+	struct efx_tx_queue *tx_queue;
+	struct efx_rx_queue *rx_queue;
+	int i, rc;
+
+	/* Initialise common structures */
+	memset(efx, 0, sizeof(*efx));
+	spin_lock_init(&efx->biu_lock);
+	spin_lock_init(&efx->phy_lock);
+	INIT_WORK(&efx->reset_work, efx_reset_work);
+	INIT_DELAYED_WORK(&efx->monitor_work, efx_monitor);
+	efx->pci_dev = pci_dev;
+	efx->state = STATE_INIT;
+	efx->reset_pending = RESET_TYPE_NONE;
+	strlcpy(efx->name, pci_name(pci_dev), sizeof(efx->name));
+	efx->board_info = efx_dummy_board_info;
+
+	efx->net_dev = net_dev;
+	efx->rx_checksum_enabled = 1;
+	spin_lock_init(&efx->netif_stop_lock);
+	spin_lock_init(&efx->stats_lock);
+	mutex_init(&efx->mac_lock);
+	efx->phy_op = &efx_dummy_phy_operations;
+	efx->mii.dev = net_dev;
+	INIT_WORK(&efx->reconfigure_work, efx_reconfigure_work);
+	atomic_set(&efx->netif_stop_count, 1);
+
+	for (i = 0; i < EFX_MAX_CHANNELS; i++) {
+		channel = &efx->channel[i];
+		channel->efx = efx;
+		channel->channel = i;
+		channel->evqnum = i;
+		channel->work_pending = 0;
+	}
+	for (i = 0; i < EFX_MAX_TX_QUEUES; i++) {
+		tx_queue = &efx->tx_queue[i];
+		tx_queue->efx = efx;
+		tx_queue->queue = i;
+		tx_queue->buffer = NULL;
+		tx_queue->channel = &efx->channel[0]; /* for safety */
+	}
+	for (i = 0; i < EFX_MAX_RX_QUEUES; i++) {
+		rx_queue = &efx->rx_queue[i];
+		rx_queue->efx = efx;
+		rx_queue->queue = i;
+		rx_queue->channel = &efx->channel[0]; /* for safety */
+		rx_queue->buffer = NULL;
+		spin_lock_init(&rx_queue->add_lock);
+		INIT_DELAYED_WORK(&rx_queue->work, efx_rx_work);
+	}
+
+	efx->type = type;
+
+	/* Sanity-check NIC type */
+	EFX_BUG_ON_PARANOID(efx->type->txd_ring_mask &
+			    (efx->type->txd_ring_mask + 1));
+	EFX_BUG_ON_PARANOID(efx->type->rxd_ring_mask &
+			    (efx->type->rxd_ring_mask + 1));
+	EFX_BUG_ON_PARANOID(efx->type->evq_size &
+			    (efx->type->evq_size - 1));
+	/* As close as we can get to guaranteeing that we don't overflow */
+	EFX_BUG_ON_PARANOID(efx->type->evq_size <
+			    (efx->type->txd_ring_mask + 1 +
+			     efx->type->rxd_ring_mask + 1));
+	EFX_BUG_ON_PARANOID(efx->type->phys_addr_channels > EFX_MAX_CHANNELS);
+
+	/* Higher numbered interrupt modes are less capable! */
+	efx->interrupt_mode = max(efx->type->max_interrupt_mode,
+				  interrupt_mode);
+
+	efx->workqueue = create_singlethread_workqueue("sfc_work");
+	if (!efx->workqueue) {
+		rc = -ENOMEM;
+		goto fail1;
+	}
+
+	return 0;
+
+ fail1:
+	return rc;
+}
+
+static void efx_fini_struct(struct efx_nic *efx)
+{
+	if (efx->workqueue) {
+		destroy_workqueue(efx->workqueue);
+		efx->workqueue = NULL;
+	}
+}
+
+/**************************************************************************
+ *
+ * PCI interface
+ *
+ **************************************************************************/
+
+/* Main body of final NIC shutdown code
+ * This is called only at module unload (or hotplug removal).
+ */
+static void efx_pci_remove_main(struct efx_nic *efx)
+{
+	EFX_ASSERT_RESET_SERIALISED(efx);
+
+	/* Skip everything if we never obtained a valid membase */
+	if (!efx->membase)
+		return;
+
+	efx_fini_channels(efx);
+	efx_fini_port(efx);
+
+	/* Shutdown the board, then the NIC and board state */
+	falcon_fini_interrupt(efx);
+
+	efx_fini_napi(efx);
+	efx_remove_all(efx);
+}
+
+/* Final NIC shutdown
+ * This is called only at module unload (or hotplug removal).
+ */
+static void efx_pci_remove(struct pci_dev *pci_dev)
+{
+	struct efx_nic *efx;
+
+	efx = pci_get_drvdata(pci_dev);
+	if (!efx)
+		return;
+
+	/* Mark the NIC as fini, then stop the interface */
+	rtnl_lock();
+	efx->state = STATE_FINI;
+	dev_close(efx->net_dev);
+
+	/* Allow any queued efx_resets() to complete */
+	rtnl_unlock();
+
+	if (efx->membase == NULL)
+		goto out;
+
+	efx_unregister_netdev(efx);
+
+	/* Wait for any scheduled resets to complete. No more will be
+	 * scheduled from this point because efx_stop_all() has been
+	 * called, we are no longer registered with driverlink, and
+	 * the net_device's have been removed. */
+	flush_workqueue(efx->workqueue);
+
+	efx_pci_remove_main(efx);
+
+out:
+	efx_fini_io(efx);
+	EFX_LOG(efx, "shutdown successful\n");
+
+	pci_set_drvdata(pci_dev, NULL);
+	efx_fini_struct(efx);
+	free_netdev(efx->net_dev);
+};
+
+/* Main body of NIC initialisation
+ * This is called at module load (or hotplug insertion, theoretically).
+ */
+static int efx_pci_probe_main(struct efx_nic *efx)
+{
+	int rc;
+
+	/* Do start-of-day initialisation */
+	rc = efx_probe_all(efx);
+	if (rc)
+		goto fail1;
+
+	rc = efx_init_napi(efx);
+	if (rc)
+		goto fail2;
+
+	/* Initialise the board */
+	rc = efx->board_info.init(efx);
+	if (rc) {
+		EFX_ERR(efx, "failed to initialise board\n");
+		goto fail3;
+	}
+
+	rc = falcon_init_nic(efx);
+	if (rc) {
+		EFX_ERR(efx, "failed to initialise NIC\n");
+		goto fail4;
+	}
+
+	rc = efx_init_port(efx);
+	if (rc) {
+		EFX_ERR(efx, "failed to initialise port\n");
+		goto fail5;
+	}
+
+	rc = efx_init_channels(efx);
+	if (rc)
+		goto fail6;
+
+	rc = falcon_init_interrupt(efx);
+	if (rc)
+		goto fail7;
+
+	return 0;
+
+ fail7:
+	efx_fini_channels(efx);
+ fail6:
+	efx_fini_port(efx);
+ fail5:
+ fail4:
+ fail3:
+	efx_fini_napi(efx);
+ fail2:
+	efx_remove_all(efx);
+ fail1:
+	return rc;
+}
+
+/* NIC initialisation
+ *
+ * This is called at module load (or hotplug insertion,
+ * theoretically).  It sets up PCI mappings, tests and resets the NIC,
+ * sets up and registers the network devices with the kernel and hooks
+ * the interrupt service routine.  It does not prepare the device for
+ * transmission; this is left to the first time one of the network
+ * interfaces is brought up (i.e. efx_net_open).
+ */
+static int __devinit efx_pci_probe(struct pci_dev *pci_dev,
+				   const struct pci_device_id *entry)
+{
+	struct efx_nic_type *type = (struct efx_nic_type *) entry->driver_data;
+	struct net_device *net_dev;
+	struct efx_nic *efx;
+	int i, rc;
+
+	/* Allocate and initialise a struct net_device and struct efx_nic */
+	net_dev = alloc_etherdev(sizeof(*efx));
+	if (!net_dev)
+		return -ENOMEM;
+	net_dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_HIGHDMA;
+	if (lro)
+		net_dev->features |= NETIF_F_LRO;
+	efx = net_dev->priv;
+	pci_set_drvdata(pci_dev, efx);
+	rc = efx_init_struct(efx, type, pci_dev, net_dev);
+	if (rc)
+		goto fail1;
+
+	EFX_INFO(efx, "Solarflare Communications NIC detected\n");
+
+	/* Set up basic I/O (BAR mappings etc) */
+	rc = efx_init_io(efx);
+	if (rc)
+		goto fail2;
+
+	/* No serialisation is required with the reset path because
+	 * we're in STATE_INIT. */
+	for (i = 0; i < 5; i++) {
+		rc = efx_pci_probe_main(efx);
+		if (rc == 0)
+			break;
+
+		/* Serialise against efx_reset(). No more resets will be
+		 * scheduled since efx_stop_all() has been called, and we
+		 * have not and never have been registered with either
+		 * the rtnetlink or driverlink layers. */
+		cancel_work_sync(&efx->reset_work);
+
+		/* Retry if a recoverably reset event has been scheduled */
+		if ((efx->reset_pending != RESET_TYPE_INVISIBLE) &&
+		    (efx->reset_pending != RESET_TYPE_ALL))
+			goto fail3;
+
+		efx->reset_pending = RESET_TYPE_NONE;
+	}
+
+	if (rc) {
+		EFX_ERR(efx, "Could not reset NIC\n");
+		goto fail4;
+	}
+
+	/* Switch to the running state before we expose the device to
+	 * the OS.  This is to ensure that the initial gathering of
+	 * MAC stats succeeds. */
+	rtnl_lock();
+	efx->state = STATE_RUNNING;
+	rtnl_unlock();
+
+	rc = efx_register_netdev(efx);
+	if (rc)
+		goto fail5;
+
+	EFX_LOG(efx, "initialisation successful\n");
+
+	return 0;
+
+ fail5:
+	efx_pci_remove_main(efx);
+ fail4:
+ fail3:
+	efx_fini_io(efx);
+ fail2:
+	efx_fini_struct(efx);
+ fail1:
+	EFX_LOG(efx, "initialisation failed. rc=%d\n", rc);
+	free_netdev(net_dev);
+	return rc;
+}
+
+static struct pci_driver efx_pci_driver = {
+	.name		= EFX_DRIVER_NAME,
+	.id_table	= efx_pci_table,
+	.probe		= efx_pci_probe,
+	.remove		= efx_pci_remove,
+};
+
+/**************************************************************************
+ *
+ * Kernel module interface
+ *
+ *************************************************************************/
+
+module_param(interrupt_mode, uint, 0444);
+MODULE_PARM_DESC(interrupt_mode,
+		 "Interrupt mode (0=>MSIX 1=>MSI 2=>legacy)");
+
+static int __init efx_init_module(void)
+{
+	int rc;
+
+	printk(KERN_INFO "Solarflare NET driver v" EFX_DRIVER_VERSION "\n");
+
+	rc = register_netdevice_notifier(&efx_netdev_notifier);
+	if (rc)
+		goto err_notifier;
+
+	refill_workqueue = create_workqueue("sfc_refill");
+	if (!refill_workqueue) {
+		rc = -ENOMEM;
+		goto err_refill;
+	}
+
+	rc = pci_register_driver(&efx_pci_driver);
+	if (rc < 0)
+		goto err_pci;
+
+	return 0;
+
+ err_pci:
+	destroy_workqueue(refill_workqueue);
+ err_refill:
+	unregister_netdevice_notifier(&efx_netdev_notifier);
+ err_notifier:
+	return rc;
+}
+
+static void __exit efx_exit_module(void)
+{
+	printk(KERN_INFO "Solarflare NET driver unloading\n");
+
+	pci_unregister_driver(&efx_pci_driver);
+	destroy_workqueue(refill_workqueue);
+	unregister_netdevice_notifier(&efx_netdev_notifier);
+
+}
+
+module_init(efx_init_module);
+module_exit(efx_exit_module);
+
+MODULE_AUTHOR("Michael Brown <mbrown@fensystems.co.uk> and "
+	      "Solarflare Communications");
+MODULE_DESCRIPTION("Solarflare Communications network driver");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, efx_pci_table);
diff --git a/drivers/net/sfc/efx.h b/drivers/net/sfc/efx.h
new file mode 100644
index 0000000..3b2f69f
--- /dev/null
+++ b/drivers/net/sfc/efx.h
@@ -0,0 +1,67 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2006-2008 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_EFX_H
+#define EFX_EFX_H
+
+#include "net_driver.h"
+
+/* PCI IDs */
+#define EFX_VENDID_SFC	        0x1924
+#define FALCON_A_P_DEVID	0x0703
+#define FALCON_A_S_DEVID        0x6703
+#define FALCON_B_P_DEVID        0x0710
+
+/* TX */
+extern int efx_xmit(struct efx_nic *efx,
+		    struct efx_tx_queue *tx_queue, struct sk_buff *skb);
+extern void efx_stop_queue(struct efx_nic *efx);
+extern void efx_wake_queue(struct efx_nic *efx);
+
+/* RX */
+extern void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index);
+extern void efx_rx_packet(struct efx_rx_queue *rx_queue, unsigned int index,
+			  unsigned int len, int checksummed, int discard);
+extern void efx_schedule_slow_fill(struct efx_rx_queue *rx_queue, int delay);
+
+/* Channels */
+extern void efx_process_channel_now(struct efx_channel *channel);
+extern int efx_flush_queues(struct efx_nic *efx);
+
+/* Ports */
+extern void efx_reconfigure_port(struct efx_nic *efx);
+
+/* Global */
+extern void efx_schedule_reset(struct efx_nic *efx, enum reset_type type);
+extern void efx_suspend(struct efx_nic *efx);
+extern void efx_resume(struct efx_nic *efx);
+extern void efx_init_irq_moderation(struct efx_nic *efx, int tx_usecs,
+				    int rx_usecs);
+extern int efx_request_power(struct efx_nic *efx, int mw, const char *name);
+extern void efx_hex_dump(const u8 *, unsigned int, const char *);
+
+/* Dummy PHY ops for PHY drivers */
+extern int efx_port_dummy_op_int(struct efx_nic *efx);
+extern void efx_port_dummy_op_void(struct efx_nic *efx);
+extern void efx_port_dummy_op_blink(struct efx_nic *efx, int blink);
+
+
+extern unsigned int efx_monitor_interval;
+
+static inline void efx_schedule_channel(struct efx_channel *channel)
+{
+	EFX_TRACE(channel->efx, "channel %d scheduling NAPI poll on CPU%d\n",
+		  channel->channel, raw_smp_processor_id());
+	channel->work_pending = 1;
+
+	netif_rx_schedule(channel->napi_dev, &channel->napi_str);
+}
+
+#endif /* EFX_EFX_H */
diff --git a/drivers/net/sfc/enum.h b/drivers/net/sfc/enum.h
new file mode 100644
index 0000000..43663a4
--- /dev/null
+++ b/drivers/net/sfc/enum.h
@@ -0,0 +1,50 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2007 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_ENUM_H
+#define EFX_ENUM_H
+
+/*****************************************************************************/
+
+/**
+ * enum reset_type - reset types
+ *
+ * %RESET_TYPE_INVSIBLE, %RESET_TYPE_ALL, %RESET_TYPE_WORLD and
+ * %RESET_TYPE_DISABLE specify the method/scope of the reset.  The
+ * other valuesspecify reasons, which efx_schedule_reset() will choose
+ * a method for.
+ *
+ * @RESET_TYPE_INVISIBLE: don't reset the PHYs or interrupts
+ * @RESET_TYPE_ALL: reset everything but PCI core blocks
+ * @RESET_TYPE_WORLD: reset everything, save & restore PCI config
+ * @RESET_TYPE_DISABLE: disable NIC
+ * @RESET_TYPE_MONITOR: reset due to hardware monitor
+ * @RESET_TYPE_INT_ERROR: reset due to internal error
+ * @RESET_TYPE_RX_RECOVERY: reset to recover from RX datapath errors
+ * @RESET_TYPE_RX_DESC_FETCH: pcie error during rx descriptor fetch
+ * @RESET_TYPE_TX_DESC_FETCH: pcie error during tx descriptor fetch
+ * @RESET_TYPE_TX_SKIP: hardware completed empty tx descriptors
+ */
+enum reset_type {
+	RESET_TYPE_NONE = -1,
+	RESET_TYPE_INVISIBLE = 0,
+	RESET_TYPE_ALL = 1,
+	RESET_TYPE_WORLD = 2,
+	RESET_TYPE_DISABLE = 3,
+	RESET_TYPE_MAX_METHOD,
+	RESET_TYPE_MONITOR,
+	RESET_TYPE_INT_ERROR,
+	RESET_TYPE_RX_RECOVERY,
+	RESET_TYPE_RX_DESC_FETCH,
+	RESET_TYPE_TX_DESC_FETCH,
+	RESET_TYPE_TX_SKIP,
+	RESET_TYPE_MAX,
+};
+
+#endif /* EFX_ENUM_H */
diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c
new file mode 100644
index 0000000..ad541ba
--- /dev/null
+++ b/drivers/net/sfc/ethtool.c
@@ -0,0 +1,460 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2006-2008 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/rtnetlink.h>
+#include "net_driver.h"
+#include "efx.h"
+#include "ethtool.h"
+#include "falcon.h"
+#include "gmii.h"
+#include "mac.h"
+
+static int efx_ethtool_set_tx_csum(struct net_device *net_dev, u32 enable);
+
+struct ethtool_string {
+	char name[ETH_GSTRING_LEN];
+};
+
+struct efx_ethtool_stat {
+	const char *name;
+	enum {
+		EFX_ETHTOOL_STAT_SOURCE_mac_stats,
+		EFX_ETHTOOL_STAT_SOURCE_nic,
+		EFX_ETHTOOL_STAT_SOURCE_channel
+	} source;
+	unsigned offset;
+	u64(*get_stat) (void *field); /* Reader function */
+};
+
+/* Initialiser for a struct #efx_ethtool_stat with type-checking */
+#define EFX_ETHTOOL_STAT(stat_name, source_name, field, field_type, \
+				get_stat_function) {			\
+	.name = #stat_name,						\
+	.source = EFX_ETHTOOL_STAT_SOURCE_##source_name,		\
+	.offset = ((((field_type *) 0) ==				\
+		      &((struct efx_##source_name *)0)->field) ?	\
+		    offsetof(struct efx_##source_name, field) :		\
+		    offsetof(struct efx_##source_name, field)),		\
+	.get_stat = get_stat_function,					\
+}
+
+static u64 efx_get_uint_stat(void *field)
+{
+	return *(unsigned int *)field;
+}
+
+static u64 efx_get_ulong_stat(void *field)
+{
+	return *(unsigned long *)field;
+}
+
+static u64 efx_get_u64_stat(void *field)
+{
+	return *(u64 *) field;
+}
+
+static u64 efx_get_atomic_stat(void *field)
+{
+	return atomic_read((atomic_t *) field);
+}
+
+#define EFX_ETHTOOL_ULONG_MAC_STAT(field)			\
+	EFX_ETHTOOL_STAT(field, mac_stats, field, 		\
+			  unsigned long, efx_get_ulong_stat)
+
+#define EFX_ETHTOOL_U64_MAC_STAT(field)				\
+	EFX_ETHTOOL_STAT(field, mac_stats, field, 		\
+			  u64, efx_get_u64_stat)
+
+#define EFX_ETHTOOL_UINT_NIC_STAT(name)				\
+	EFX_ETHTOOL_STAT(name, nic, n_##name,			\
+			 unsigned int, efx_get_uint_stat)
+
+#define EFX_ETHTOOL_ATOMIC_NIC_ERROR_STAT(field)		\
+	EFX_ETHTOOL_STAT(field, nic, field,			\
+			 atomic_t, efx_get_atomic_stat)
+
+#define EFX_ETHTOOL_UINT_CHANNEL_STAT(field)			\
+	EFX_ETHTOOL_STAT(field, channel, n_##field,		\
+			 unsigned int, efx_get_uint_stat)
+
+static struct efx_ethtool_stat efx_ethtool_stats[] = {
+	EFX_ETHTOOL_U64_MAC_STAT(tx_bytes),
+	EFX_ETHTOOL_U64_MAC_STAT(tx_good_bytes),
+	EFX_ETHTOOL_U64_MAC_STAT(tx_bad_bytes),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_packets),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_bad),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_pause),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_control),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_unicast),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_multicast),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_broadcast),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_lt64),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_64),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_65_to_127),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_128_to_255),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_256_to_511),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_512_to_1023),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_1024_to_15xx),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_15xx_to_jumbo),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_gtjumbo),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_collision),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_single_collision),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_multiple_collision),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_excessive_collision),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_deferred),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_late_collision),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_excessive_deferred),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_non_tcpudp),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_mac_src_error),
+	EFX_ETHTOOL_ULONG_MAC_STAT(tx_ip_src_error),
+	EFX_ETHTOOL_U64_MAC_STAT(rx_bytes),
+	EFX_ETHTOOL_U64_MAC_STAT(rx_good_bytes),
+	EFX_ETHTOOL_U64_MAC_STAT(rx_bad_bytes),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_packets),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_good),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_bad),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_pause),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_control),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_unicast),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_multicast),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_broadcast),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_lt64),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_64),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_65_to_127),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_128_to_255),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_256_to_511),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_512_to_1023),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_1024_to_15xx),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_15xx_to_jumbo),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_gtjumbo),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_bad_lt64),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_bad_64_to_15xx),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_bad_15xx_to_jumbo),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_bad_gtjumbo),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_overflow),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_missed),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_false_carrier),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_symbol_error),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_align_error),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_length_error),
+	EFX_ETHTOOL_ULONG_MAC_STAT(rx_internal_error),
+	EFX_ETHTOOL_UINT_NIC_STAT(rx_nodesc_drop_cnt),
+	EFX_ETHTOOL_ATOMIC_NIC_ERROR_STAT(rx_reset),
+	EFX_ETHTOOL_UINT_CHANNEL_STAT(rx_tobe_disc),
+	EFX_ETHTOOL_UINT_CHANNEL_STAT(rx_ip_hdr_chksum_err),
+	EFX_ETHTOOL_UINT_CHANNEL_STAT(rx_tcp_udp_chksum_err),
+	EFX_ETHTOOL_UINT_CHANNEL_STAT(rx_frm_trunc),
+};
+
+/* Number of ethtool statistics */
+#define EFX_ETHTOOL_NUM_STATS ARRAY_SIZE(efx_ethtool_stats)
+
+/**************************************************************************
+ *
+ * Ethtool operations
+ *
+ **************************************************************************
+ */
+
+/* Identify device by flashing LEDs */
+static int efx_ethtool_phys_id(struct net_device *net_dev, u32 seconds)
+{
+	struct efx_nic *efx = net_dev->priv;
+
+	efx->board_info.blink(efx, 1);
+	schedule_timeout_interruptible(seconds * HZ);
+	efx->board_info.blink(efx, 0);
+	return 0;
+}
+
+/* This must be called with rtnl_lock held. */
+int efx_ethtool_get_settings(struct net_device *net_dev,
+			     struct ethtool_cmd *ecmd)
+{
+	struct efx_nic *efx = net_dev->priv;
+	int rc;
+
+	mutex_lock(&efx->mac_lock);
+	rc = falcon_xmac_get_settings(efx, ecmd);
+	mutex_unlock(&efx->mac_lock);
+
+	return rc;
+}
+
+/* This must be called with rtnl_lock held. */
+int efx_ethtool_set_settings(struct net_device *net_dev,
+			     struct ethtool_cmd *ecmd)
+{
+	struct efx_nic *efx = net_dev->priv;
+	int rc;
+
+	mutex_lock(&efx->mac_lock);
+	rc = falcon_xmac_set_settings(efx, ecmd);
+	mutex_unlock(&efx->mac_lock);
+	if (!rc)
+		efx_reconfigure_port(efx);
+
+	return rc;
+}
+
+static void efx_ethtool_get_drvinfo(struct net_device *net_dev,
+				    struct ethtool_drvinfo *info)
+{
+	struct efx_nic *efx = net_dev->priv;
+
+	strlcpy(info->driver, EFX_DRIVER_NAME, sizeof(info->driver));
+	strlcpy(info->version, EFX_DRIVER_VERSION, sizeof(info->version));
+	strlcpy(info->bus_info, pci_name(efx->pci_dev), sizeof(info->bus_info));
+}
+
+static int efx_ethtool_get_stats_count(struct net_device *net_dev)
+{
+	return EFX_ETHTOOL_NUM_STATS;
+}
+
+static void efx_ethtool_get_strings(struct net_device *net_dev,
+				    u32 string_set, u8 *strings)
+{
+	struct ethtool_string *ethtool_strings =
+		(struct ethtool_string *)strings;
+	int i;
+
+	if (string_set == ETH_SS_STATS)
+		for (i = 0; i < EFX_ETHTOOL_NUM_STATS; i++)
+			strncpy(ethtool_strings[i].name,
+				efx_ethtool_stats[i].name,
+				sizeof(ethtool_strings[i].name));
+}
+
+static void efx_ethtool_get_stats(struct net_device *net_dev,
+				  struct ethtool_stats *stats,
+				  u64 *data)
+{
+	struct efx_nic *efx = net_dev->priv;
+	struct efx_mac_stats *mac_stats = &efx->mac_stats;
+	struct efx_ethtool_stat *stat;
+	struct efx_channel *channel;
+	int i;
+
+	EFX_BUG_ON_PARANOID(stats->n_stats != EFX_ETHTOOL_NUM_STATS);
+
+	/* Update MAC and NIC statistics */
+	net_dev->get_stats(net_dev);
+
+	/* Fill detailed statistics buffer */
+	for (i = 0; i < EFX_ETHTOOL_NUM_STATS; i++) {
+		stat = &efx_ethtool_stats[i];
+		switch (stat->source) {
+		case EFX_ETHTOOL_STAT_SOURCE_mac_stats:
+			data[i] = stat->get_stat((void *)mac_stats +
+						 stat->offset);
+			break;
+		case EFX_ETHTOOL_STAT_SOURCE_nic:
+			data[i] = stat->get_stat((void *)efx + stat->offset);
+			break;
+		case EFX_ETHTOOL_STAT_SOURCE_channel:
+			data[i] = 0;
+			efx_for_each_channel(channel, efx)
+				data[i] += stat->get_stat((void *)channel +
+							  stat->offset);
+			break;
+		}
+	}
+}
+
+static int efx_ethtool_set_tx_csum(struct net_device *net_dev, u32 enable)
+{
+	struct efx_nic *efx = net_dev->priv;
+	int rc;
+
+	rc = ethtool_op_set_tx_csum(net_dev, enable);
+	if (rc)
+		return rc;
+
+	efx_flush_queues(efx);
+
+	return 0;
+}
+
+static int efx_ethtool_set_rx_csum(struct net_device *net_dev, u32 enable)
+{
+	struct efx_nic *efx = net_dev->priv;
+
+	/* No way to stop the hardware doing the checks; we just
+	 * ignore the result.
+	 */
+	efx->rx_checksum_enabled = (enable ? 1 : 0);
+
+	return 0;
+}
+
+static u32 efx_ethtool_get_rx_csum(struct net_device *net_dev)
+{
+	struct efx_nic *efx = net_dev->priv;
+
+	return efx->rx_checksum_enabled;
+}
+
+/* Restart autonegotiation */
+static int efx_ethtool_nway_reset(struct net_device *net_dev)
+{
+	struct efx_nic *efx = net_dev->priv;
+
+	return mii_nway_restart(&efx->mii);
+}
+
+static u32 efx_ethtool_get_link(struct net_device *net_dev)
+{
+	struct efx_nic *efx = net_dev->priv;
+
+	return efx->link_up;
+}
+
+static int efx_ethtool_get_coalesce(struct net_device *net_dev,
+				    struct ethtool_coalesce *coalesce)
+{
+	struct efx_nic *efx = net_dev->priv;
+	struct efx_tx_queue *tx_queue;
+	struct efx_rx_queue *rx_queue;
+	struct efx_channel *channel;
+
+	memset(coalesce, 0, sizeof(*coalesce));
+
+	/* Find lowest IRQ moderation across all used TX queues */
+	coalesce->tx_coalesce_usecs_irq = ~((u32) 0);
+	efx_for_each_tx_queue(tx_queue, efx) {
+		channel = tx_queue->channel;
+		if (channel->irq_moderation < coalesce->tx_coalesce_usecs_irq) {
+			if (channel->used_flags != EFX_USED_BY_RX_TX)
+				coalesce->tx_coalesce_usecs_irq =
+					channel->irq_moderation;
+			else
+				coalesce->tx_coalesce_usecs_irq = 0;
+		}
+	}
+
+	/* Find lowest IRQ moderation across all used RX queues */
+	coalesce->rx_coalesce_usecs_irq = ~((u32) 0);
+	efx_for_each_rx_queue(rx_queue, efx) {
+		channel = rx_queue->channel;
+		if (channel->irq_moderation < coalesce->rx_coalesce_usecs_irq)
+			coalesce->rx_coalesce_usecs_irq =
+				channel->irq_moderation;
+	}
+
+	return 0;
+}
+
+/* Set coalescing parameters
+ * The difficulties occur for shared channels
+ */
+static int efx_ethtool_set_coalesce(struct net_device *net_dev,
+				    struct ethtool_coalesce *coalesce)
+{
+	struct efx_nic *efx = net_dev->priv;
+	struct efx_channel *channel;
+	struct efx_tx_queue *tx_queue;
+	unsigned tx_usecs, rx_usecs;
+
+	if (coalesce->use_adaptive_rx_coalesce ||
+	    coalesce->use_adaptive_tx_coalesce)
+		return -EOPNOTSUPP;
+
+	if (coalesce->rx_coalesce_usecs || coalesce->tx_coalesce_usecs) {
+		EFX_ERR(efx, "invalid coalescing setting. "
+			"Only rx/tx_coalesce_usecs_irq are supported\n");
+		return -EOPNOTSUPP;
+	}
+
+	rx_usecs = coalesce->rx_coalesce_usecs_irq;
+	tx_usecs = coalesce->tx_coalesce_usecs_irq;
+
+	/* If the channel is shared only allow RX parameters to be set */
+	efx_for_each_tx_queue(tx_queue, efx) {
+		if ((tx_queue->channel->used_flags == EFX_USED_BY_RX_TX) &&
+		    tx_usecs) {
+			EFX_ERR(efx, "Channel is shared. "
+				"Only RX coalescing may be set\n");
+			return -EOPNOTSUPP;
+		}
+	}
+
+	efx_init_irq_moderation(efx, tx_usecs, rx_usecs);
+
+	/* Reset channel to pick up new moderation value.  Note that
+	 * this may change the value of the irq_moderation field
+	 * (e.g. to allow for hardware timer granularity).
+	 */
+	efx_for_each_channel(channel, efx)
+		falcon_set_int_moderation(channel);
+
+	return 0;
+}
+
+static int efx_ethtool_set_pauseparam(struct net_device *net_dev,
+				      struct ethtool_pauseparam *pause)
+{
+	struct efx_nic *efx = net_dev->priv;
+	enum efx_fc_type flow_control = efx->flow_control;
+	int rc;
+
+	flow_control &= ~(EFX_FC_RX | EFX_FC_TX | EFX_FC_AUTO);
+	flow_control |= pause->rx_pause ? EFX_FC_RX : 0;
+	flow_control |= pause->tx_pause ? EFX_FC_TX : 0;
+	flow_control |= pause->autoneg ? EFX_FC_AUTO : 0;
+
+	/* Try to push the pause parameters */
+	mutex_lock(&efx->mac_lock);
+	rc = falcon_xmac_set_pause(efx, flow_control);
+	mutex_unlock(&efx->mac_lock);
+
+	if (!rc)
+		efx_reconfigure_port(efx);
+
+	return rc;
+}
+
+static void efx_ethtool_get_pauseparam(struct net_device *net_dev,
+				       struct ethtool_pauseparam *pause)
+{
+	struct efx_nic *efx = net_dev->priv;
+
+	pause->rx_pause = (efx->flow_control & EFX_FC_RX) ? 1 : 0;
+	pause->tx_pause = (efx->flow_control & EFX_FC_TX) ? 1 : 0;
+	pause->autoneg = (efx->flow_control & EFX_FC_AUTO) ? 1 : 0;
+}
+
+
+struct ethtool_ops efx_ethtool_ops = {
+	.get_settings		= efx_ethtool_get_settings,
+	.set_settings		= efx_ethtool_set_settings,
+	.get_drvinfo		= efx_ethtool_get_drvinfo,
+	.nway_reset		= efx_ethtool_nway_reset,
+	.get_link		= efx_ethtool_get_link,
+	.get_coalesce		= efx_ethtool_get_coalesce,
+	.set_coalesce		= efx_ethtool_set_coalesce,
+	.get_pauseparam         = efx_ethtool_get_pauseparam,
+	.set_pauseparam         = efx_ethtool_set_pauseparam,
+	.get_rx_csum		= efx_ethtool_get_rx_csum,
+	.set_rx_csum		= efx_ethtool_set_rx_csum,
+	.get_tx_csum		= ethtool_op_get_tx_csum,
+	.set_tx_csum		= efx_ethtool_set_tx_csum,
+	.get_sg			= ethtool_op_get_sg,
+	.set_sg			= ethtool_op_set_sg,
+	.get_flags		= ethtool_op_get_flags,
+	.set_flags		= ethtool_op_set_flags,
+	.get_strings		= efx_ethtool_get_strings,
+	.phys_id		= efx_ethtool_phys_id,
+	.get_stats_count	= efx_ethtool_get_stats_count,
+	.get_ethtool_stats	= efx_ethtool_get_stats,
+};
diff --git a/drivers/net/sfc/ethtool.h b/drivers/net/sfc/ethtool.h
new file mode 100644
index 0000000..3628e43
--- /dev/null
+++ b/drivers/net/sfc/ethtool.h
@@ -0,0 +1,27 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005 Fen Systems Ltd.
+ * Copyright 2006 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_ETHTOOL_H
+#define EFX_ETHTOOL_H
+
+#include "net_driver.h"
+
+/*
+ * Ethtool support
+ */
+
+extern int efx_ethtool_get_settings(struct net_device *net_dev,
+				    struct ethtool_cmd *ecmd);
+extern int efx_ethtool_set_settings(struct net_device *net_dev,
+				    struct ethtool_cmd *ecmd);
+
+extern struct ethtool_ops efx_ethtool_ops;
+
+#endif /* EFX_ETHTOOL_H */
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
new file mode 100644
index 0000000..46db549
--- /dev/null
+++ b/drivers/net/sfc/falcon.c
@@ -0,0 +1,2722 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2006-2008 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/seq_file.h>
+#include "net_driver.h"
+#include "bitfield.h"
+#include "efx.h"
+#include "mac.h"
+#include "gmii.h"
+#include "spi.h"
+#include "falcon.h"
+#include "falcon_hwdefs.h"
+#include "falcon_io.h"
+#include "mdio_10g.h"
+#include "phy.h"
+#include "boards.h"
+#include "workarounds.h"
+
+/* Falcon hardware control.
+ * Falcon is the internal codename for the SFC4000 controller that is
+ * present in SFE400X evaluation boards
+ */
+
+/**
+ * struct falcon_nic_data - Falcon NIC state
+ * @next_buffer_table: First available buffer table id
+ * @pci_dev2: The secondary PCI device if present
+ */
+struct falcon_nic_data {
+	unsigned next_buffer_table;
+	struct pci_dev *pci_dev2;
+};
+
+/**************************************************************************
+ *
+ * Configurable values
+ *
+ **************************************************************************
+ */
+
+static int disable_dma_stats;
+
+/* This is set to 16 for a good reason.  In summary, if larger than
+ * 16, the descriptor cache holds more than a default socket
+ * buffer's worth of packets (for UDP we can only have at most one
+ * socket buffer's worth outstanding).  This combined with the fact
+ * that we only get 1 TX event per descriptor cache means the NIC
+ * goes idle.
+ */
+#define TX_DC_ENTRIES 16
+#define TX_DC_ENTRIES_ORDER 0
+#define TX_DC_BASE 0x130000
+
+#define RX_DC_ENTRIES 64
+#define RX_DC_ENTRIES_ORDER 2
+#define RX_DC_BASE 0x100000
+
+/* RX FIFO XOFF watermark
+ *
+ * When the amount of the RX FIFO increases used increases past this
+ * watermark send XOFF. Only used if RX flow control is enabled (ethtool -A)
+ * This also has an effect on RX/TX arbitration
+ */
+static int rx_xoff_thresh_bytes = -1;
+module_param(rx_xoff_thresh_bytes, int, 0644);
+MODULE_PARM_DESC(rx_xoff_thresh_bytes, "RX fifo XOFF threshold");
+
+/* RX FIFO XON watermark
+ *
+ * When the amount of the RX FIFO used decreases below this
+ * watermark send XON. Only used if TX flow control is enabled (ethtool -A)
+ * This also has an effect on RX/TX arbitration
+ */
+static int rx_xon_thresh_bytes = -1;
+module_param(rx_xon_thresh_bytes, int, 0644);
+MODULE_PARM_DESC(rx_xon_thresh_bytes, "RX fifo XON threshold");
+
+/* TX descriptor ring size - min 512 max 4k */
+#define FALCON_TXD_RING_ORDER TX_DESCQ_SIZE_1K
+#define FALCON_TXD_RING_SIZE 1024
+#define FALCON_TXD_RING_MASK (FALCON_TXD_RING_SIZE - 1)
+
+/* RX descriptor ring size - min 512 max 4k */
+#define FALCON_RXD_RING_ORDER RX_DESCQ_SIZE_1K
+#define FALCON_RXD_RING_SIZE 1024
+#define FALCON_RXD_RING_MASK (FALCON_RXD_RING_SIZE - 1)
+
+/* Event queue size - max 32k */
+#define FALCON_EVQ_ORDER EVQ_SIZE_4K
+#define FALCON_EVQ_SIZE 4096
+#define FALCON_EVQ_MASK (FALCON_EVQ_SIZE - 1)
+
+/* Max number of internal errors. After this resets will not be performed */
+#define FALCON_MAX_INT_ERRORS 4
+
+/* Maximum period that we wait for flush events. If the flush event
+ * doesn't arrive in this period of time then we check if the queue
+ * was disabled anyway. */
+#define FALCON_FLUSH_TIMEOUT 10 /* 10ms */
+
+/**************************************************************************
+ *
+ * Falcon constants
+ *
+ **************************************************************************
+ */
+
+/* DMA address mask (up to 46-bit, avoiding compiler warnings)
+ *
+ * Note that it is possible to have a platform with 64-bit longs and
+ * 32-bit DMA addresses, or vice versa.  EFX_DMA_MASK takes care of the
+ * platform DMA mask.
+ */
+#if BITS_PER_LONG == 64
+#define FALCON_DMA_MASK EFX_DMA_MASK(0x00003fffffffffffUL)
+#else
+#define FALCON_DMA_MASK EFX_DMA_MASK(0x00003fffffffffffULL)
+#endif
+
+/* TX DMA length mask (13-bit) */
+#define FALCON_TX_DMA_MASK (4096 - 1)
+
+/* Size and alignment of special buffers (4KB) */
+#define FALCON_BUF_SIZE 4096
+
+/* Dummy SRAM size code */
+#define SRM_NB_BSZ_ONCHIP_ONLY (-1)
+
+/* Be nice if these (or equiv.) were in linux/pci_regs.h, but they're not. */
+#define PCI_EXP_DEVCAP_PWR_VAL_LBN	18
+#define PCI_EXP_DEVCAP_PWR_SCL_LBN	26
+#define PCI_EXP_DEVCTL_PAYLOAD_LBN	5
+#define PCI_EXP_LNKSTA_LNK_WID		0x3f0
+#define PCI_EXP_LNKSTA_LNK_WID_LBN	4
+
+#define FALCON_IS_DUAL_FUNC(efx)		\
+	(FALCON_REV(efx) < FALCON_REV_B0)
+
+/**************************************************************************
+ *
+ * Falcon hardware access
+ *
+ **************************************************************************/
+
+/* Read the current event from the event queue */
+static inline efx_qword_t *falcon_event(struct efx_channel *channel,
+					unsigned int index)
+{
+	return (((efx_qword_t *) (channel->eventq.addr)) + index);
+}
+
+/* See if an event is present
+ *
+ * We check both the high and low dword of the event for all ones.  We
+ * wrote all ones when we cleared the event, and no valid event can
+ * have all ones in either its high or low dwords.  This approach is
+ * robust against reordering.
+ *
+ * Note that using a single 64-bit comparison is incorrect; even
+ * though the CPU read will be atomic, the DMA write may not be.
+ */
+static inline int falcon_event_present(efx_qword_t *event)
+{
+	return (!(EFX_DWORD_IS_ALL_ONES(event->dword[0]) |
+		  EFX_DWORD_IS_ALL_ONES(event->dword[1])));
+}
+
+/**************************************************************************
+ *
+ * I2C bus - this is a bit-bashing interface using GPIO pins
+ * Note that it uses the output enables to tristate the outputs
+ * SDA is the data pin and SCL is the clock
+ *
+ **************************************************************************
+ */
+static void falcon_setsdascl(struct efx_i2c_interface *i2c)
+{
+	efx_oword_t reg;
+
+	falcon_read(i2c->efx, &reg, GPIO_CTL_REG_KER);
+	EFX_SET_OWORD_FIELD(reg, GPIO0_OEN, (i2c->scl ? 0 : 1));
+	EFX_SET_OWORD_FIELD(reg, GPIO3_OEN, (i2c->sda ? 0 : 1));
+	falcon_write(i2c->efx, &reg, GPIO_CTL_REG_KER);
+}
+
+static int falcon_getsda(struct efx_i2c_interface *i2c)
+{
+	efx_oword_t reg;
+
+	falcon_read(i2c->efx, &reg, GPIO_CTL_REG_KER);
+	return EFX_OWORD_FIELD(reg, GPIO3_IN);
+}
+
+static int falcon_getscl(struct efx_i2c_interface *i2c)
+{
+	efx_oword_t reg;
+
+	falcon_read(i2c->efx, &reg, GPIO_CTL_REG_KER);
+	return EFX_DWORD_FIELD(reg, GPIO0_IN);
+}
+
+static struct efx_i2c_bit_operations falcon_i2c_bit_operations = {
+	.setsda		= falcon_setsdascl,
+	.setscl		= falcon_setsdascl,
+	.getsda		= falcon_getsda,
+	.getscl		= falcon_getscl,
+	.udelay		= 100,
+	.mdelay		= 10,
+};
+
+/**************************************************************************
+ *
+ * Falcon special buffer handling
+ * Special buffers are used for event queues and the TX and RX
+ * descriptor rings.
+ *
+ *************************************************************************/
+
+/*
+ * Initialise a Falcon special buffer
+ *
+ * This will define a buffer (previously allocated via
+ * falcon_alloc_special_buffer()) in Falcon's buffer table, allowing
+ * it to be used for event queues, descriptor rings etc.
+ */
+static int
+falcon_init_special_buffer(struct efx_nic *efx,
+			   struct efx_special_buffer *buffer)
+{
+	efx_qword_t buf_desc;
+	int index;
+	dma_addr_t dma_addr;
+	int i;
+
+	EFX_BUG_ON_PARANOID(!buffer->addr);
+
+	/* Write buffer descriptors to NIC */
+	for (i = 0; i < buffer->entries; i++) {
+		index = buffer->index + i;
+		dma_addr = buffer->dma_addr + (i * 4096);
+		EFX_LOG(efx, "mapping special buffer %d at %llx\n",
+			index, (unsigned long long)dma_addr);
+		EFX_POPULATE_QWORD_4(buf_desc,
+				     IP_DAT_BUF_SIZE, IP_DAT_BUF_SIZE_4K,
+				     BUF_ADR_REGION, 0,
+				     BUF_ADR_FBUF, (dma_addr >> 12),
+				     BUF_OWNER_ID_FBUF, 0);
+		falcon_write_sram(efx, &buf_desc, index);
+	}
+
+	return 0;
+}
+
+/* Unmaps a buffer from Falcon and clears the buffer table entries */
+static void
+falcon_fini_special_buffer(struct efx_nic *efx,
+			   struct efx_special_buffer *buffer)
+{
+	efx_oword_t buf_tbl_upd;
+	unsigned int start = buffer->index;
+	unsigned int end = (buffer->index + buffer->entries - 1);
+
+	if (!buffer->entries)
+		return;
+
+	EFX_LOG(efx, "unmapping special buffers %d-%d\n",
+		buffer->index, buffer->index + buffer->entries - 1);
+
+	EFX_POPULATE_OWORD_4(buf_tbl_upd,
+			     BUF_UPD_CMD, 0,
+			     BUF_CLR_CMD, 1,
+			     BUF_CLR_END_ID, end,
+			     BUF_CLR_START_ID, start);
+	falcon_write(efx, &buf_tbl_upd, BUF_TBL_UPD_REG_KER);
+}
+
+/*
+ * Allocate a new Falcon special buffer
+ *
+ * This allocates memory for a new buffer, clears it and allocates a
+ * new buffer ID range.  It does not write into Falcon's buffer table.
+ *
+ * This call will allocate 4KB buffers, since Falcon can't use 8KB
+ * buffers for event queues and descriptor rings.
+ */
+static int falcon_alloc_special_buffer(struct efx_nic *efx,
+				       struct efx_special_buffer *buffer,
+				       unsigned int len)
+{
+	struct falcon_nic_data *nic_data = efx->nic_data;
+
+	len = ALIGN(len, FALCON_BUF_SIZE);
+
+	buffer->addr = pci_alloc_consistent(efx->pci_dev, len,
+					    &buffer->dma_addr);
+	if (!buffer->addr)
+		return -ENOMEM;
+	buffer->len = len;
+	buffer->entries = len / FALCON_BUF_SIZE;
+	BUG_ON(buffer->dma_addr & (FALCON_BUF_SIZE - 1));
+
+	/* All zeros is a potentially valid event so memset to 0xff */
+	memset(buffer->addr, 0xff, len);
+
+	/* Select new buffer ID */
+	buffer->index = nic_data->next_buffer_table;
+	nic_data->next_buffer_table += buffer->entries;
+
+	EFX_LOG(efx, "allocating special buffers %d-%d at %llx+%x "
+		"(virt %p phys %lx)\n", buffer->index,
+		buffer->index + buffer->entries - 1,
+		(unsigned long long)buffer->dma_addr, len,
+		buffer->addr, virt_to_phys(buffer->addr));
+
+	return 0;
+}
+
+static void falcon_free_special_buffer(struct efx_nic *efx,
+				       struct efx_special_buffer *buffer)
+{
+	if (!buffer->addr)
+		return;
+
+	EFX_LOG(efx, "deallocating special buffers %d-%d at %llx+%x "
+		"(virt %p phys %lx)\n", buffer->index,
+		buffer->index + buffer->entries - 1,
+		(unsigned long long)buffer->dma_addr, buffer->len,
+		buffer->addr, virt_to_phys(buffer->addr));
+
+	pci_free_consistent(efx->pci_dev, buffer->len, buffer->addr,
+			    buffer->dma_addr);
+	buffer->addr = NULL;
+	buffer->entries = 0;
+}
+
+/**************************************************************************
+ *
+ * Falcon generic buffer handling
+ * These buffers are used for interrupt status and MAC stats
+ *
+ **************************************************************************/
+
+static int falcon_alloc_buffer(struct efx_nic *efx,
+			       struct efx_buffer *buffer, unsigned int len)
+{
+	buffer->addr = pci_alloc_consistent(efx->pci_dev, len,
+					    &buffer->dma_addr);
+	if (!buffer->addr)
+		return -ENOMEM;
+	buffer->len = len;
+	memset(buffer->addr, 0, len);
+	return 0;
+}
+
+static void falcon_free_buffer(struct efx_nic *efx, struct efx_buffer *buffer)
+{
+	if (buffer->addr) {
+		pci_free_consistent(efx->pci_dev, buffer->len,
+				    buffer->addr, buffer->dma_addr);
+		buffer->addr = NULL;
+	}
+}
+
+/**************************************************************************
+ *
+ * Falcon TX path
+ *
+ **************************************************************************/
+
+/* Returns a pointer to the specified transmit descriptor in the TX
+ * descriptor queue belonging to the specified channel.
+ */
+static inline efx_qword_t *falcon_tx_desc(struct efx_tx_queue *tx_queue,
+					       unsigned int index)
+{
+	return (((efx_qword_t *) (tx_queue->txd.addr)) + index);
+}
+
+/* This writes to the TX_DESC_WPTR; write pointer for TX descriptor ring */
+static inline void falcon_notify_tx_desc(struct efx_tx_queue *tx_queue)
+{
+	unsigned write_ptr;
+	efx_dword_t reg;
+
+	write_ptr = tx_queue->write_count & FALCON_TXD_RING_MASK;
+	EFX_POPULATE_DWORD_1(reg, TX_DESC_WPTR_DWORD, write_ptr);
+	falcon_writel_page(tx_queue->efx, &reg,
+			   TX_DESC_UPD_REG_KER_DWORD, tx_queue->queue);
+}
+
+
+/* For each entry inserted into the software descriptor ring, create a
+ * descriptor in the hardware TX descriptor ring (in host memory), and
+ * write a doorbell.
+ */
+void falcon_push_buffers(struct efx_tx_queue *tx_queue)
+{
+
+	struct efx_tx_buffer *buffer;
+	efx_qword_t *txd;
+	unsigned write_ptr;
+
+	BUG_ON(tx_queue->write_count == tx_queue->insert_count);
+
+	do {
+		write_ptr = tx_queue->write_count & FALCON_TXD_RING_MASK;
+		buffer = &tx_queue->buffer[write_ptr];
+		txd = falcon_tx_desc(tx_queue, write_ptr);
+		++tx_queue->write_count;
+
+		/* Create TX descriptor ring entry */
+		EFX_POPULATE_QWORD_5(*txd,
+				     TX_KER_PORT, 0,
+				     TX_KER_CONT, buffer->continuation,
+				     TX_KER_BYTE_CNT, buffer->len,
+				     TX_KER_BUF_REGION, 0,
+				     TX_KER_BUF_ADR, buffer->dma_addr);
+	} while (tx_queue->write_count != tx_queue->insert_count);
+
+	wmb(); /* Ensure descriptors are written before they are fetched */
+	falcon_notify_tx_desc(tx_queue);
+}
+
+/* Allocate hardware resources for a TX queue */
+int falcon_probe_tx(struct efx_tx_queue *tx_queue)
+{
+	struct efx_nic *efx = tx_queue->efx;
+	return falcon_alloc_special_buffer(efx, &tx_queue->txd,
+					   FALCON_TXD_RING_SIZE *
+					   sizeof(efx_qword_t));
+}
+
+int falcon_init_tx(struct efx_tx_queue *tx_queue)
+{
+	efx_oword_t tx_desc_ptr;
+	struct efx_nic *efx = tx_queue->efx;
+	int rc;
+
+	/* Pin TX descriptor ring */
+	rc = falcon_init_special_buffer(efx, &tx_queue->txd);
+	if (rc)
+		return rc;
+
+	/* Push TX descriptor ring to card */
+	EFX_POPULATE_OWORD_10(tx_desc_ptr,
+			      TX_DESCQ_EN, 1,
+			      TX_ISCSI_DDIG_EN, 0,
+			      TX_ISCSI_HDIG_EN, 0,
+			      TX_DESCQ_BUF_BASE_ID, tx_queue->txd.index,
+			      TX_DESCQ_EVQ_ID, tx_queue->channel->evqnum,
+			      TX_DESCQ_OWNER_ID, 0,
+			      TX_DESCQ_LABEL, tx_queue->queue,
+			      TX_DESCQ_SIZE, FALCON_TXD_RING_ORDER,
+			      TX_DESCQ_TYPE, 0,
+			      TX_NON_IP_DROP_DIS_B0, 1);
+
+	if (FALCON_REV(efx) >= FALCON_REV_B0) {
+		int csum = !(efx->net_dev->features & NETIF_F_IP_CSUM);
+		EFX_SET_OWORD_FIELD(tx_desc_ptr, TX_IP_CHKSM_DIS_B0, csum);
+		EFX_SET_OWORD_FIELD(tx_desc_ptr, TX_TCP_CHKSM_DIS_B0, csum);
+	}
+
+	falcon_write_table(efx, &tx_desc_ptr, efx->type->txd_ptr_tbl_base,
+			   tx_queue->queue);
+
+	if (FALCON_REV(efx) < FALCON_REV_B0) {
+		efx_oword_t reg;
+
+		BUG_ON(tx_queue->queue >= 128); /* HW limit */
+
+		falcon_read(efx, &reg, TX_CHKSM_CFG_REG_KER_A1);
+		if (efx->net_dev->features & NETIF_F_IP_CSUM)
+			clear_bit_le(tx_queue->queue, (void *)&reg);
+		else
+			set_bit_le(tx_queue->queue, (void *)&reg);
+		falcon_write(efx, &reg, TX_CHKSM_CFG_REG_KER_A1);
+	}
+
+	return 0;
+}
+
+static int falcon_flush_tx_queue(struct efx_tx_queue *tx_queue)
+{
+	struct efx_nic *efx = tx_queue->efx;
+	struct efx_channel *channel = &efx->channel[0];
+	efx_oword_t tx_flush_descq;
+	unsigned int read_ptr, i;
+
+	/* Post a flush command */
+	EFX_POPULATE_OWORD_2(tx_flush_descq,
+			     TX_FLUSH_DESCQ_CMD, 1,
+			     TX_FLUSH_DESCQ, tx_queue->queue);
+	falcon_write(efx, &tx_flush_descq, TX_FLUSH_DESCQ_REG_KER);
+	msleep(FALCON_FLUSH_TIMEOUT);
+
+	if (EFX_WORKAROUND_7803(efx))
+		return 0;
+
+	/* Look for a flush completed event */
+	read_ptr = channel->eventq_read_ptr;
+	for (i = 0; i < FALCON_EVQ_SIZE; ++i) {
+		efx_qword_t *event = falcon_event(channel, read_ptr);
+		int ev_code, ev_sub_code, ev_queue;
+		if (!falcon_event_present(event))
+			break;
+
+		ev_code = EFX_QWORD_FIELD(*event, EV_CODE);
+		ev_sub_code = EFX_QWORD_FIELD(*event, DRIVER_EV_SUB_CODE);
+		ev_queue = EFX_QWORD_FIELD(*event, DRIVER_EV_TX_DESCQ_ID);
+		if ((ev_sub_code == TX_DESCQ_FLS_DONE_EV_DECODE) &&
+		    (ev_queue == tx_queue->queue)) {
+			EFX_LOG(efx, "tx queue %d flush command succesful\n",
+				tx_queue->queue);
+			return 0;
+		}
+
+		read_ptr = (read_ptr + 1) & FALCON_EVQ_MASK;
+	}
+
+	if (EFX_WORKAROUND_11557(efx)) {
+		efx_oword_t reg;
+		int enabled;
+
+		falcon_read_table(efx, &reg, efx->type->txd_ptr_tbl_base,
+				  tx_queue->queue);
+		enabled = EFX_OWORD_FIELD(reg, TX_DESCQ_EN);
+		if (!enabled) {
+			EFX_LOG(efx, "tx queue %d disabled without a "
+				"flush event seen\n", tx_queue->queue);
+			return 0;
+		}
+	}
+
+	EFX_ERR(efx, "tx queue %d flush command timed out\n", tx_queue->queue);
+	return -ETIMEDOUT;
+}
+
+void falcon_fini_tx(struct efx_tx_queue *tx_queue)
+{
+	struct efx_nic *efx = tx_queue->efx;
+	efx_oword_t tx_desc_ptr;
+
+	/* Stop the hardware using the queue */
+	if (falcon_flush_tx_queue(tx_queue))
+		EFX_ERR(efx, "failed to flush tx queue %d\n", tx_queue->queue);
+
+	/* Remove TX descriptor ring from card */
+	EFX_ZERO_OWORD(tx_desc_ptr);
+	falcon_write_table(efx, &tx_desc_ptr, efx->type->txd_ptr_tbl_base,
+			   tx_queue->queue);
+
+	/* Unpin TX descriptor ring */
+	falcon_fini_special_buffer(efx, &tx_queue->txd);
+}
+
+/* Free buffers backing TX queue */
+void falcon_remove_tx(struct efx_tx_queue *tx_queue)
+{
+	falcon_free_special_buffer(tx_queue->efx, &tx_queue->txd);
+}
+
+/**************************************************************************
+ *
+ * Falcon RX path
+ *
+ **************************************************************************/
+
+/* Returns a pointer to the specified descriptor in the RX descriptor queue */
+static inline efx_qword_t *falcon_rx_desc(struct efx_rx_queue *rx_queue,
+					       unsigned int index)
+{
+	return (((efx_qword_t *) (rx_queue->rxd.addr)) + index);
+}
+
+/* This creates an entry in the RX descriptor queue */
+static inline void falcon_build_rx_desc(struct efx_rx_queue *rx_queue,
+					unsigned index)
+{
+	struct efx_rx_buffer *rx_buf;
+	efx_qword_t *rxd;
+
+	rxd = falcon_rx_desc(rx_queue, index);
+	rx_buf = efx_rx_buffer(rx_queue, index);
+	EFX_POPULATE_QWORD_3(*rxd,
+			     RX_KER_BUF_SIZE,
+			     rx_buf->len -
+			     rx_queue->efx->type->rx_buffer_padding,
+			     RX_KER_BUF_REGION, 0,
+			     RX_KER_BUF_ADR, rx_buf->dma_addr);
+}
+
+/* This writes to the RX_DESC_WPTR register for the specified receive
+ * descriptor ring.
+ */
+void falcon_notify_rx_desc(struct efx_rx_queue *rx_queue)
+{
+	efx_dword_t reg;
+	unsigned write_ptr;
+
+	while (rx_queue->notified_count != rx_queue->added_count) {
+		falcon_build_rx_desc(rx_queue,
+				     rx_queue->notified_count &
+				     FALCON_RXD_RING_MASK);
+		++rx_queue->notified_count;
+	}
+
+	wmb();
+	write_ptr = rx_queue->added_count & FALCON_RXD_RING_MASK;
+	EFX_POPULATE_DWORD_1(reg, RX_DESC_WPTR_DWORD, write_ptr);
+	falcon_writel_page(rx_queue->efx, &reg,
+			   RX_DESC_UPD_REG_KER_DWORD, rx_queue->queue);
+}
+
+int falcon_probe_rx(struct efx_rx_queue *rx_queue)
+{
+	struct efx_nic *efx = rx_queue->efx;
+	return falcon_alloc_special_buffer(efx, &rx_queue->rxd,
+					   FALCON_RXD_RING_SIZE *
+					   sizeof(efx_qword_t));
+}
+
+int falcon_init_rx(struct efx_rx_queue *rx_queue)
+{
+	efx_oword_t rx_desc_ptr;
+	struct efx_nic *efx = rx_queue->efx;
+	int rc;
+	int is_b0 = FALCON_REV(efx) >= FALCON_REV_B0;
+	int iscsi_digest_en = is_b0;
+
+	EFX_LOG(efx, "RX queue %d ring in special buffers %d-%d\n",
+		rx_queue->queue, rx_queue->rxd.index,
+		rx_queue->rxd.index + rx_queue->rxd.entries - 1);
+
+	/* Pin RX descriptor ring */
+	rc = falcon_init_special_buffer(efx, &rx_queue->rxd);
+	if (rc)
+		return rc;
+
+	/* Push RX descriptor ring to card */
+	EFX_POPULATE_OWORD_10(rx_desc_ptr,
+			      RX_ISCSI_DDIG_EN, iscsi_digest_en,
+			      RX_ISCSI_HDIG_EN, iscsi_digest_en,
+			      RX_DESCQ_BUF_BASE_ID, rx_queue->rxd.index,
+			      RX_DESCQ_EVQ_ID, rx_queue->channel->evqnum,
+			      RX_DESCQ_OWNER_ID, 0,
+			      RX_DESCQ_LABEL, rx_queue->queue,
+			      RX_DESCQ_SIZE, FALCON_RXD_RING_ORDER,
+			      RX_DESCQ_TYPE, 0 /* kernel queue */ ,
+			      /* For >=B0 this is scatter so disable */
+			      RX_DESCQ_JUMBO, !is_b0,
+			      RX_DESCQ_EN, 1);
+	falcon_write_table(efx, &rx_desc_ptr, efx->type->rxd_ptr_tbl_base,
+			   rx_queue->queue);
+	return 0;
+}
+
+static int falcon_flush_rx_queue(struct efx_rx_queue *rx_queue)
+{
+	struct efx_nic *efx = rx_queue->efx;
+	struct efx_channel *channel = &efx->channel[0];
+	unsigned int read_ptr, i;
+	efx_oword_t rx_flush_descq;
+
+	/* Post a flush command */
+	EFX_POPULATE_OWORD_2(rx_flush_descq,
+			     RX_FLUSH_DESCQ_CMD, 1,
+			     RX_FLUSH_DESCQ, rx_queue->queue);
+	falcon_write(efx, &rx_flush_descq, RX_FLUSH_DESCQ_REG_KER);
+	msleep(FALCON_FLUSH_TIMEOUT);
+
+	if (EFX_WORKAROUND_7803(efx))
+		return 0;
+
+	/* Look for a flush completed event */
+	read_ptr = channel->eventq_read_ptr;
+	for (i = 0; i < FALCON_EVQ_SIZE; ++i) {
+		efx_qword_t *event = falcon_event(channel, read_ptr);
+		int ev_code, ev_sub_code, ev_queue, ev_failed;
+		if (!falcon_event_present(event))
+			break;
+
+		ev_code = EFX_QWORD_FIELD(*event, EV_CODE);
+		ev_sub_code = EFX_QWORD_FIELD(*event, DRIVER_EV_SUB_CODE);
+		ev_queue = EFX_QWORD_FIELD(*event, DRIVER_EV_RX_DESCQ_ID);
+		ev_failed = EFX_QWORD_FIELD(*event, DRIVER_EV_RX_FLUSH_FAIL);
+
+		if ((ev_sub_code == RX_DESCQ_FLS_DONE_EV_DECODE) &&
+		    (ev_queue == rx_queue->queue)) {
+			if (ev_failed) {
+				EFX_INFO(efx, "rx queue %d flush command "
+					 "failed\n", rx_queue->queue);
+				return -EAGAIN;
+			} else {
+				EFX_LOG(efx, "rx queue %d flush command "
+					"succesful\n", rx_queue->queue);
+				return 0;
+			}
+		}
+
+		read_ptr = (read_ptr + 1) & FALCON_EVQ_MASK;
+	}
+
+	if (EFX_WORKAROUND_11557(efx)) {
+		efx_oword_t reg;
+		int enabled;
+
+		falcon_read_table(efx, &reg, efx->type->rxd_ptr_tbl_base,
+				  rx_queue->queue);
+		enabled = EFX_OWORD_FIELD(reg, RX_DESCQ_EN);
+		if (!enabled) {
+			EFX_LOG(efx, "rx queue %d disabled without a "
+				"flush event seen\n", rx_queue->queue);
+			return 0;
+		}
+	}
+
+	EFX_ERR(efx, "rx queue %d flush command timed out\n", rx_queue->queue);
+	return -ETIMEDOUT;
+}
+
+void falcon_fini_rx(struct efx_rx_queue *rx_queue)
+{
+	efx_oword_t rx_desc_ptr;
+	struct efx_nic *efx = rx_queue->efx;
+	int i, rc;
+
+	/* Try and flush the rx queue. This may need to be repeated */
+	for (i = 0; i < 5; i++) {
+		rc = falcon_flush_rx_queue(rx_queue);
+		if (rc == -EAGAIN)
+			continue;
+		break;
+	}
+	if (rc)
+		EFX_ERR(efx, "failed to flush rx queue %d\n", rx_queue->queue);
+
+	/* Remove RX descriptor ring from card */
+	EFX_ZERO_OWORD(rx_desc_ptr);
+	falcon_write_table(efx, &rx_desc_ptr, efx->type->rxd_ptr_tbl_base,
+			   rx_queue->queue);
+
+	/* Unpin RX descriptor ring */
+	falcon_fini_special_buffer(efx, &rx_queue->rxd);
+}
+
+/* Free buffers backing RX queue */
+void falcon_remove_rx(struct efx_rx_queue *rx_queue)
+{
+	falcon_free_special_buffer(rx_queue->efx, &rx_queue->rxd);
+}
+
+/**************************************************************************
+ *
+ * Falcon event queue processing
+ * Event queues are processed by per-channel tasklets.
+ *
+ **************************************************************************/
+
+/* Update a channel's event queue's read pointer (RPTR) register
+ *
+ * This writes the EVQ_RPTR_REG register for the specified channel's
+ * event queue.
+ *
+ * Note that EVQ_RPTR_REG contains the index of the "last read" event,
+ * whereas channel->eventq_read_ptr contains the index of the "next to
+ * read" event.
+ */
+void falcon_eventq_read_ack(struct efx_channel *channel)
+{
+	efx_dword_t reg;
+	struct efx_nic *efx = channel->efx;
+
+	EFX_POPULATE_DWORD_1(reg, EVQ_RPTR_DWORD, channel->eventq_read_ptr);
+	falcon_writel_table(efx, &reg, efx->type->evq_rptr_tbl_base,
+			    channel->evqnum);
+}
+
+/* Use HW to insert a SW defined event */
+void falcon_generate_event(struct efx_channel *channel, efx_qword_t *event)
+{
+	efx_oword_t drv_ev_reg;
+
+	EFX_POPULATE_OWORD_2(drv_ev_reg,
+			     DRV_EV_QID, channel->evqnum,
+			     DRV_EV_DATA,
+			     EFX_QWORD_FIELD64(*event, WHOLE_EVENT));
+	falcon_write(channel->efx, &drv_ev_reg, DRV_EV_REG_KER);
+}
+
+/* Handle a transmit completion event
+ *
+ * Falcon batches TX completion events; the message we receive is of
+ * the form "complete all TX events up to this index".
+ */
+static inline void falcon_handle_tx_event(struct efx_channel *channel,
+					  efx_qword_t *event)
+{
+	unsigned int tx_ev_desc_ptr;
+	unsigned int tx_ev_q_label;
+	struct efx_tx_queue *tx_queue;
+	struct efx_nic *efx = channel->efx;
+
+	if (likely(EFX_QWORD_FIELD(*event, TX_EV_COMP))) {
+		/* Transmit completion */
+		tx_ev_desc_ptr = EFX_QWORD_FIELD(*event, TX_EV_DESC_PTR);
+		tx_ev_q_label = EFX_QWORD_FIELD(*event, TX_EV_Q_LABEL);
+		tx_queue = &efx->tx_queue[tx_ev_q_label];
+		efx_xmit_done(tx_queue, tx_ev_desc_ptr);
+	} else if (EFX_QWORD_FIELD(*event, TX_EV_WQ_FF_FULL)) {
+		/* Rewrite the FIFO write pointer */
+		tx_ev_q_label = EFX_QWORD_FIELD(*event, TX_EV_Q_LABEL);
+		tx_queue = &efx->tx_queue[tx_ev_q_label];
+
+		if (NET_DEV_REGISTERED(efx))
+			netif_tx_lock(efx->net_dev);
+		falcon_notify_tx_desc(tx_queue);
+		if (NET_DEV_REGISTERED(efx))
+			netif_tx_unlock(efx->net_dev);
+	} else if (EFX_QWORD_FIELD(*event, TX_EV_PKT_ERR) &&
+		   EFX_WORKAROUND_10727(efx)) {
+		efx_schedule_reset(efx, RESET_TYPE_TX_DESC_FETCH);
+	} else {
+		EFX_ERR(efx, "channel %d unexpected TX event "
+			EFX_QWORD_FMT"\n", channel->channel,
+			EFX_QWORD_VAL(*event));
+	}
+}
+
+/* Check received packet's destination MAC address. */
+static int check_dest_mac(struct efx_rx_queue *rx_queue,
+			  const efx_qword_t *event)
+{
+	struct efx_rx_buffer *rx_buf;
+	struct efx_nic *efx = rx_queue->efx;
+	int rx_ev_desc_ptr;
+	struct ethhdr *eh;
+
+	if (efx->promiscuous)
+		return 1;
+
+	rx_ev_desc_ptr = EFX_QWORD_FIELD(*event, RX_EV_DESC_PTR);
+	rx_buf = efx_rx_buffer(rx_queue, rx_ev_desc_ptr);
+	eh = (struct ethhdr *)rx_buf->data;
+	if (memcmp(eh->h_dest, efx->net_dev->dev_addr, ETH_ALEN))
+		return 0;
+	return 1;
+}
+
+/* Detect errors included in the rx_evt_pkt_ok bit. */
+static void falcon_handle_rx_not_ok(struct efx_rx_queue *rx_queue,
+				    const efx_qword_t *event,
+				    unsigned *rx_ev_pkt_ok,
+				    int *discard, int byte_count)
+{
+	struct efx_nic *efx = rx_queue->efx;
+	unsigned rx_ev_buf_owner_id_err, rx_ev_ip_hdr_chksum_err;
+	unsigned rx_ev_tcp_udp_chksum_err, rx_ev_eth_crc_err;
+	unsigned rx_ev_frm_trunc, rx_ev_drib_nib, rx_ev_tobe_disc;
+	unsigned rx_ev_pkt_type, rx_ev_other_err, rx_ev_pause_frm;
+	unsigned rx_ev_ip_frag_err, rx_ev_hdr_type, rx_ev_mcast_pkt;
+	int snap, non_ip;
+
+	rx_ev_hdr_type = EFX_QWORD_FIELD(*event, RX_EV_HDR_TYPE);
+	rx_ev_mcast_pkt = EFX_QWORD_FIELD(*event, RX_EV_MCAST_PKT);
+	rx_ev_tobe_disc = EFX_QWORD_FIELD(*event, RX_EV_TOBE_DISC);
+	rx_ev_pkt_type = EFX_QWORD_FIELD(*event, RX_EV_PKT_TYPE);
+	rx_ev_buf_owner_id_err = EFX_QWORD_FIELD(*event,
+						 RX_EV_BUF_OWNER_ID_ERR);
+	rx_ev_ip_frag_err = EFX_QWORD_FIELD(*event, RX_EV_IF_FRAG_ERR);
+	rx_ev_ip_hdr_chksum_err = EFX_QWORD_FIELD(*event,
+						  RX_EV_IP_HDR_CHKSUM_ERR);
+	rx_ev_tcp_udp_chksum_err = EFX_QWORD_FIELD(*event,
+						   RX_EV_TCP_UDP_CHKSUM_ERR);
+	rx_ev_eth_crc_err = EFX_QWORD_FIELD(*event, RX_EV_ETH_CRC_ERR);
+	rx_ev_frm_trunc = EFX_QWORD_FIELD(*event, RX_EV_FRM_TRUNC);
+	rx_ev_drib_nib = ((FALCON_REV(efx) >= FALCON_REV_B0) ?
+			  0 : EFX_QWORD_FIELD(*event, RX_EV_DRIB_NIB));
+	rx_ev_pause_frm = EFX_QWORD_FIELD(*event, RX_EV_PAUSE_FRM_ERR);
+
+	/* Every error apart from tobe_disc and pause_frm */
+	rx_ev_other_err = (rx_ev_drib_nib | rx_ev_tcp_udp_chksum_err |
+			   rx_ev_buf_owner_id_err | rx_ev_eth_crc_err |
+			   rx_ev_frm_trunc | rx_ev_ip_hdr_chksum_err);
+
+	snap = (rx_ev_pkt_type == RX_EV_PKT_TYPE_LLC_DECODE) ||
+		(rx_ev_pkt_type == RX_EV_PKT_TYPE_VLAN_LLC_DECODE);
+	non_ip = (rx_ev_hdr_type == RX_EV_HDR_TYPE_NON_IP_DECODE);
+
+	/* SFC bug 5475/8970: The Falcon XMAC incorrectly calculates the
+	 * length field of an LLC frame, which sets TOBE_DISC. We could set
+	 * PASS_LEN_ERR, but we want the MAC to filter out short frames (to
+	 * protect the RX block).
+	 *
+	 * bug5475 - LLC/SNAP: Falcon identifies SNAP packets.
+	 * bug8970 - LLC/noSNAP: Falcon does not provide an LLC flag.
+	 *                       LLC can't encapsulate IP, so by definition
+	 *                       these packets are NON_IP.
+	 *
+	 * Unicast mismatch will also cause TOBE_DISC, so the driver needs
+	 * to check this.
+	 */
+	if (EFX_WORKAROUND_5475(efx) && rx_ev_tobe_disc && (snap || non_ip)) {
+		/* If all the other flags are zero then we can state the
+		 * entire packet is ok, which will flag to the kernel not
+		 * to recalculate checksums.
+		 */
+		if (!(non_ip | rx_ev_other_err | rx_ev_pause_frm))
+			*rx_ev_pkt_ok = 1;
+
+		rx_ev_tobe_disc = 0;
+
+		/* TOBE_DISC is set for unicast mismatch.  But given that
+		 * we can't trust TOBE_DISC here, we must validate the dest
+		 * MAC address ourselves.
+		 */
+		if (!rx_ev_mcast_pkt && !check_dest_mac(rx_queue, event))
+			rx_ev_tobe_disc = 1;
+	}
+
+	/* Count errors that are not in MAC stats. */
+	if (rx_ev_frm_trunc)
+		++rx_queue->channel->n_rx_frm_trunc;
+	else if (rx_ev_tobe_disc)
+		++rx_queue->channel->n_rx_tobe_disc;
+	else if (rx_ev_ip_hdr_chksum_err)
+		++rx_queue->channel->n_rx_ip_hdr_chksum_err;
+	else if (rx_ev_tcp_udp_chksum_err)
+		++rx_queue->channel->n_rx_tcp_udp_chksum_err;
+	if (rx_ev_ip_frag_err)
+		++rx_queue->channel->n_rx_ip_frag_err;
+
+	/* The frame must be discarded if any of these are true. */
+	*discard = (rx_ev_eth_crc_err | rx_ev_frm_trunc | rx_ev_drib_nib |
+		    rx_ev_tobe_disc | rx_ev_pause_frm);
+
+	/* TOBE_DISC is expected on unicast mismatches; don't print out an
+	 * error message.  FRM_TRUNC indicates RXDP dropped the packet due
+	 * to a FIFO overflow.
+	 */
+#ifdef EFX_ENABLE_DEBUG
+	if (rx_ev_other_err) {
+		EFX_INFO_RL(efx, " RX queue %d unexpected RX event "
+			    EFX_QWORD_FMT "%s%s%s%s%s%s%s%s%s\n",
+			    rx_queue->queue, EFX_QWORD_VAL(*event),
+			    rx_ev_buf_owner_id_err ? " [OWNER_ID_ERR]" : "",
+			    rx_ev_ip_hdr_chksum_err ?
+			    " [IP_HDR_CHKSUM_ERR]" : "",
+			    rx_ev_tcp_udp_chksum_err ?
+			    " [TCP_UDP_CHKSUM_ERR]" : "",
+			    rx_ev_eth_crc_err ? " [ETH_CRC_ERR]" : "",
+			    rx_ev_frm_trunc ? " [FRM_TRUNC]" : "",
+			    rx_ev_drib_nib ? " [DRIB_NIB]" : "",
+			    rx_ev_tobe_disc ? " [TOBE_DISC]" : "",
+			    rx_ev_pause_frm ? " [PAUSE]" : "",
+			    snap ? " [SNAP/LLC]" : "");
+	}
+#endif
+
+	if (unlikely(rx_ev_eth_crc_err && EFX_WORKAROUND_10750(efx) &&
+		     efx->phy_type == PHY_TYPE_10XPRESS))
+		tenxpress_crc_err(efx);
+}
+
+/* Handle receive events that are not in-order. */
+static void falcon_handle_rx_bad_index(struct efx_rx_queue *rx_queue,
+				       unsigned index)
+{
+	struct efx_nic *efx = rx_queue->efx;
+	unsigned expected, dropped;
+
+	expected = rx_queue->removed_count & FALCON_RXD_RING_MASK;
+	dropped = ((index + FALCON_RXD_RING_SIZE - expected) &
+		   FALCON_RXD_RING_MASK);
+	EFX_INFO(efx, "dropped %d events (index=%d expected=%d)\n",
+		dropped, index, expected);
+
+	efx_schedule_reset(efx, EFX_WORKAROUND_5676(efx) ?
+			   RESET_TYPE_RX_RECOVERY : RESET_TYPE_DISABLE);
+}
+
+/* Handle a packet received event
+ *
+ * Falcon silicon gives a "discard" flag if it's a unicast packet with the
+ * wrong destination address
+ * Also "is multicast" and "matches multicast filter" flags can be used to
+ * discard non-matching multicast packets.
+ */
+static inline int falcon_handle_rx_event(struct efx_channel *channel,
+					 const efx_qword_t *event)
+{
+	unsigned int rx_ev_q_label, rx_ev_desc_ptr, rx_ev_byte_cnt;
+	unsigned int rx_ev_pkt_ok, rx_ev_hdr_type, rx_ev_mcast_pkt;
+	unsigned expected_ptr;
+	int discard = 0, checksummed;
+	struct efx_rx_queue *rx_queue;
+	struct efx_nic *efx = channel->efx;
+
+	/* Basic packet information */
+	rx_ev_byte_cnt = EFX_QWORD_FIELD(*event, RX_EV_BYTE_CNT);
+	rx_ev_pkt_ok = EFX_QWORD_FIELD(*event, RX_EV_PKT_OK);
+	rx_ev_hdr_type = EFX_QWORD_FIELD(*event, RX_EV_HDR_TYPE);
+	WARN_ON(EFX_QWORD_FIELD(*event, RX_EV_JUMBO_CONT));
+	WARN_ON(EFX_QWORD_FIELD(*event, RX_EV_SOP) != 1);
+
+	rx_ev_q_label = EFX_QWORD_FIELD(*event, RX_EV_Q_LABEL);
+	rx_queue = &efx->rx_queue[rx_ev_q_label];
+
+	rx_ev_desc_ptr = EFX_QWORD_FIELD(*event, RX_EV_DESC_PTR);
+	expected_ptr = rx_queue->removed_count & FALCON_RXD_RING_MASK;
+	if (unlikely(rx_ev_desc_ptr != expected_ptr)) {
+		falcon_handle_rx_bad_index(rx_queue, rx_ev_desc_ptr);
+		return rx_ev_q_label;
+	}
+
+	if (likely(rx_ev_pkt_ok)) {
+		/* If packet is marked as OK and packet type is TCP/IPv4 or
+		 * UDP/IPv4, then we can rely on the hardware checksum.
+		 */
+		checksummed = RX_EV_HDR_TYPE_HAS_CHECKSUMS(rx_ev_hdr_type);
+	} else {
+		falcon_handle_rx_not_ok(rx_queue, event, &rx_ev_pkt_ok,
+					&discard, rx_ev_byte_cnt);
+		checksummed = 0;
+	}
+
+	/* Detect multicast packets that didn't match the filter */
+	rx_ev_mcast_pkt = EFX_QWORD_FIELD(*event, RX_EV_MCAST_PKT);
+	if (rx_ev_mcast_pkt) {
+		unsigned int rx_ev_mcast_hash_match =
+			EFX_QWORD_FIELD(*event, RX_EV_MCAST_HASH_MATCH);
+
+		if (unlikely(!rx_ev_mcast_hash_match))
+			discard = 1;
+	}
+
+	/* Handle received packet */
+	efx_rx_packet(rx_queue, rx_ev_desc_ptr, rx_ev_byte_cnt,
+		      checksummed, discard);
+
+	return rx_ev_q_label;
+}
+
+/* Global events are basically PHY events */
+static void falcon_handle_global_event(struct efx_channel *channel,
+				       efx_qword_t *event)
+{
+	struct efx_nic *efx = channel->efx;
+	int is_phy_event = 0, handled = 0;
+
+	/* Check for interrupt on either port.  Some boards have a
+	 * single PHY wired to the interrupt line for port 1. */
+	if (EFX_QWORD_FIELD(*event, G_PHY0_INTR) ||
+	    EFX_QWORD_FIELD(*event, G_PHY1_INTR) ||
+	    EFX_QWORD_FIELD(*event, XG_PHY_INTR))
+		is_phy_event = 1;
+
+	if ((FALCON_REV(efx) >= FALCON_REV_B0) &&
+	    EFX_OWORD_FIELD(*event, XG_MNT_INTR_B0))
+		is_phy_event = 1;
+
+	if (is_phy_event) {
+		efx->phy_op->clear_interrupt(efx);
+		queue_work(efx->workqueue, &efx->reconfigure_work);
+		handled = 1;
+	}
+
+	if (EFX_QWORD_FIELD_VER(efx, *event, RX_RECOVERY)) {
+		EFX_ERR(efx, "channel %d seen global RX_RESET "
+			"event. Resetting.\n", channel->channel);
+
+		atomic_inc(&efx->rx_reset);
+		efx_schedule_reset(efx, EFX_WORKAROUND_6555(efx) ?
+				   RESET_TYPE_RX_RECOVERY : RESET_TYPE_DISABLE);
+		handled = 1;
+	}
+
+	if (!handled)
+		EFX_ERR(efx, "channel %d unknown global event "
+			EFX_QWORD_FMT "\n", channel->channel,
+			EFX_QWORD_VAL(*event));
+}
+
+static void falcon_handle_driver_event(struct efx_channel *channel,
+				       efx_qword_t *event)
+{
+	struct efx_nic *efx = channel->efx;
+	unsigned int ev_sub_code;
+	unsigned int ev_sub_data;
+
+	ev_sub_code = EFX_QWORD_FIELD(*event, DRIVER_EV_SUB_CODE);
+	ev_sub_data = EFX_QWORD_FIELD(*event, DRIVER_EV_SUB_DATA);
+
+	switch (ev_sub_code) {
+	case TX_DESCQ_FLS_DONE_EV_DECODE:
+		EFX_TRACE(efx, "channel %d TXQ %d flushed\n",
+			  channel->channel, ev_sub_data);
+		break;
+	case RX_DESCQ_FLS_DONE_EV_DECODE:
+		EFX_TRACE(efx, "channel %d RXQ %d flushed\n",
+			  channel->channel, ev_sub_data);
+		break;
+	case EVQ_INIT_DONE_EV_DECODE:
+		EFX_LOG(efx, "channel %d EVQ %d initialised\n",
+			channel->channel, ev_sub_data);
+		break;
+	case SRM_UPD_DONE_EV_DECODE:
+		EFX_TRACE(efx, "channel %d SRAM update done\n",
+			  channel->channel);
+		break;
+	case WAKE_UP_EV_DECODE:
+		EFX_TRACE(efx, "channel %d RXQ %d wakeup event\n",
+			  channel->channel, ev_sub_data);
+		break;
+	case TIMER_EV_DECODE:
+		EFX_TRACE(efx, "channel %d RX queue %d timer expired\n",
+			  channel->channel, ev_sub_data);
+		break;
+	case RX_RECOVERY_EV_DECODE:
+		EFX_ERR(efx, "channel %d seen DRIVER RX_RESET event. "
+			"Resetting.\n", channel->channel);
+		efx_schedule_reset(efx,
+				   EFX_WORKAROUND_6555(efx) ?
+				   RESET_TYPE_RX_RECOVERY :
+				   RESET_TYPE_DISABLE);
+		break;
+	case RX_DSC_ERROR_EV_DECODE:
+		EFX_ERR(efx, "RX DMA Q %d reports descriptor fetch error."
+			" RX Q %d is disabled.\n", ev_sub_data, ev_sub_data);
+		efx_schedule_reset(efx, RESET_TYPE_RX_DESC_FETCH);
+		break;
+	case TX_DSC_ERROR_EV_DECODE:
+		EFX_ERR(efx, "TX DMA Q %d reports descriptor fetch error."
+			" TX Q %d is disabled.\n", ev_sub_data, ev_sub_data);
+		efx_schedule_reset(efx, RESET_TYPE_TX_DESC_FETCH);
+		break;
+	default:
+		EFX_TRACE(efx, "channel %d unknown driver event code %d "
+			  "data %04x\n", channel->channel, ev_sub_code,
+			  ev_sub_data);
+		break;
+	}
+}
+
+int falcon_process_eventq(struct efx_channel *channel, int *rx_quota)
+{
+	unsigned int read_ptr;
+	efx_qword_t event, *p_event;
+	int ev_code;
+	int rxq;
+	int rxdmaqs = 0;
+
+	read_ptr = channel->eventq_read_ptr;
+
+	do {
+		p_event = falcon_event(channel, read_ptr);
+		event = *p_event;
+
+		if (!falcon_event_present(&event))
+			/* End of events */
+			break;
+
+		EFX_TRACE(channel->efx, "channel %d event is "EFX_QWORD_FMT"\n",
+			  channel->channel, EFX_QWORD_VAL(event));
+
+		/* Clear this event by marking it all ones */
+		EFX_SET_QWORD(*p_event);
+
+		ev_code = EFX_QWORD_FIELD(event, EV_CODE);
+
+		switch (ev_code) {
+		case RX_IP_EV_DECODE:
+			rxq = falcon_handle_rx_event(channel, &event);
+			rxdmaqs |= (1 << rxq);
+			(*rx_quota)--;
+			break;
+		case TX_IP_EV_DECODE:
+			falcon_handle_tx_event(channel, &event);
+			break;
+		case DRV_GEN_EV_DECODE:
+			channel->eventq_magic
+				= EFX_QWORD_FIELD(event, EVQ_MAGIC);
+			EFX_LOG(channel->efx, "channel %d received generated "
+				"event "EFX_QWORD_FMT"\n", channel->channel,
+				EFX_QWORD_VAL(event));
+			break;
+		case GLOBAL_EV_DECODE:
+			falcon_handle_global_event(channel, &event);
+			break;
+		case DRIVER_EV_DECODE:
+			falcon_handle_driver_event(channel, &event);
+			break;
+		default:
+			EFX_ERR(channel->efx, "channel %d unknown event type %d"
+				" (data " EFX_QWORD_FMT ")\n", channel->channel,
+				ev_code, EFX_QWORD_VAL(event));
+		}
+
+		/* Increment read pointer */
+		read_ptr = (read_ptr + 1) & FALCON_EVQ_MASK;
+
+	} while (*rx_quota);
+
+	channel->eventq_read_ptr = read_ptr;
+	return rxdmaqs;
+}
+
+void falcon_set_int_moderation(struct efx_channel *channel)
+{
+	efx_dword_t timer_cmd;
+	struct efx_nic *efx = channel->efx;
+
+	/* Set timer register */
+	if (channel->irq_moderation) {
+		/* Round to resolution supported by hardware.  The value we
+		 * program is based at 0.  So actual interrupt moderation
+		 * achieved is ((x + 1) * res).
+		 */
+		unsigned int res = 5;
+		channel->irq_moderation -= (channel->irq_moderation % res);
+		if (channel->irq_moderation < res)
+			channel->irq_moderation = res;
+		EFX_POPULATE_DWORD_2(timer_cmd,
+				     TIMER_MODE, TIMER_MODE_INT_HLDOFF,
+				     TIMER_VAL,
+				     (channel->irq_moderation / res) - 1);
+	} else {
+		EFX_POPULATE_DWORD_2(timer_cmd,
+				     TIMER_MODE, TIMER_MODE_DIS,
+				     TIMER_VAL, 0);
+	}
+	falcon_writel_page_locked(efx, &timer_cmd, TIMER_CMD_REG_KER,
+				  channel->evqnum);
+
+}
+
+/* Allocate buffer table entries for event queue */
+int falcon_probe_eventq(struct efx_channel *channel)
+{
+	struct efx_nic *efx = channel->efx;
+	unsigned int evq_size;
+
+	evq_size = FALCON_EVQ_SIZE * sizeof(efx_qword_t);
+	return falcon_alloc_special_buffer(efx, &channel->eventq, evq_size);
+}
+
+int falcon_init_eventq(struct efx_channel *channel)
+{
+	efx_oword_t evq_ptr;
+	struct efx_nic *efx = channel->efx;
+	int rc;
+
+	EFX_LOG(efx, "channel %d event queue in special buffers %d-%d\n",
+		channel->channel, channel->eventq.index,
+		channel->eventq.index + channel->eventq.entries - 1);
+
+	/* Pin event queue buffer */
+	rc = falcon_init_special_buffer(efx, &channel->eventq);
+	if (rc)
+		return rc;
+
+	/* Fill event queue with all ones (i.e. empty events) */
+	memset(channel->eventq.addr, 0xff, channel->eventq.len);
+
+	/* Push event queue to card */
+	EFX_POPULATE_OWORD_3(evq_ptr,
+			     EVQ_EN, 1,
+			     EVQ_SIZE, FALCON_EVQ_ORDER,
+			     EVQ_BUF_BASE_ID, channel->eventq.index);
+	falcon_write_table(efx, &evq_ptr, efx->type->evq_ptr_tbl_base,
+			   channel->evqnum);
+
+	falcon_set_int_moderation(channel);
+
+	return 0;
+}
+
+void falcon_fini_eventq(struct efx_channel *channel)
+{
+	efx_oword_t eventq_ptr;
+	struct efx_nic *efx = channel->efx;
+
+	/* Remove event queue from card */
+	EFX_ZERO_OWORD(eventq_ptr);
+	falcon_write_table(efx, &eventq_ptr, efx->type->evq_ptr_tbl_base,
+			   channel->evqnum);
+
+	/* Unpin event queue */
+	falcon_fini_special_buffer(efx, &channel->eventq);
+}
+
+/* Free buffers backing event queue */
+void falcon_remove_eventq(struct efx_channel *channel)
+{
+	falcon_free_special_buffer(channel->efx, &channel->eventq);
+}
+
+
+/* Generates a test event on the event queue.  A subsequent call to
+ * process_eventq() should pick up the event and place the value of
+ * "magic" into channel->eventq_magic;
+ */
+void falcon_generate_test_event(struct efx_channel *channel, unsigned int magic)
+{
+	efx_qword_t test_event;
+
+	EFX_POPULATE_QWORD_2(test_event,
+			     EV_CODE, DRV_GEN_EV_DECODE,
+			     EVQ_MAGIC, magic);
+	falcon_generate_event(channel, &test_event);
+}
+
+
+/**************************************************************************
+ *
+ * Falcon hardware interrupts
+ * The hardware interrupt handler does very little work; all the event
+ * queue processing is carried out by per-channel tasklets.
+ *
+ **************************************************************************/
+
+/* Enable/disable/generate Falcon interrupts */
+static inline void falcon_interrupts(struct efx_nic *efx, int enabled,
+				     int force)
+{
+	efx_oword_t int_en_reg_ker;
+
+	EFX_POPULATE_OWORD_2(int_en_reg_ker,
+			     KER_INT_KER, force,
+			     DRV_INT_EN_KER, enabled);
+	falcon_write(efx, &int_en_reg_ker, INT_EN_REG_KER);
+}
+
+void falcon_enable_interrupts(struct efx_nic *efx)
+{
+	efx_oword_t int_adr_reg_ker;
+	struct efx_channel *channel;
+
+	EFX_ZERO_OWORD(*((efx_oword_t *) efx->irq_status.addr));
+	wmb(); /* Ensure interrupt vector is clear before interrupts enabled */
+
+	/* Program address */
+	EFX_POPULATE_OWORD_2(int_adr_reg_ker,
+			     NORM_INT_VEC_DIS_KER, EFX_INT_MODE_USE_MSI(efx),
+			     INT_ADR_KER, efx->irq_status.dma_addr);
+	falcon_write(efx, &int_adr_reg_ker, INT_ADR_REG_KER);
+
+	/* Enable interrupts */
+	falcon_interrupts(efx, 1, 0);
+
+	/* Force processing of all the channels to get the EVQ RPTRs up to
+	   date */
+	efx_for_each_channel_with_interrupt(channel, efx)
+		efx_schedule_channel(channel);
+}
+
+void falcon_disable_interrupts(struct efx_nic *efx)
+{
+	/* Disable interrupts */
+	falcon_interrupts(efx, 0, 0);
+}
+
+/* Generate a Falcon test interrupt
+ * Interrupt must already have been enabled, otherwise nasty things
+ * may happen.
+ */
+void falcon_generate_interrupt(struct efx_nic *efx)
+{
+	falcon_interrupts(efx, 1, 1);
+}
+
+/* Acknowledge a legacy interrupt from Falcon
+ *
+ * This acknowledges a legacy (not MSI) interrupt via INT_ACK_KER_REG.
+ *
+ * Due to SFC bug 3706 (silicon revision <=A1) reads can be duplicated in the
+ * BIU. Interrupt acknowledge is read sensitive so must write instead
+ * (then read to ensure the BIU collector is flushed)
+ *
+ * NB most hardware supports MSI interrupts
+ */
+static inline void falcon_irq_ack_a1(struct efx_nic *efx)
+{
+	efx_dword_t reg;
+
+	EFX_POPULATE_DWORD_1(reg, INT_ACK_DUMMY_DATA, 0xb7eb7e);
+	falcon_writel(efx, &reg, INT_ACK_REG_KER_A1);
+	falcon_readl(efx, &reg, WORK_AROUND_BROKEN_PCI_READS_REG_KER_A1);
+}
+
+/* Process a fatal interrupt
+ * Disable bus mastering ASAP and schedule a reset
+ */
+static irqreturn_t falcon_fatal_interrupt(struct efx_nic *efx)
+{
+	struct falcon_nic_data *nic_data = efx->nic_data;
+	efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr;
+	efx_oword_t fatal_intr;
+	int error, mem_perr;
+	static int n_int_errors;
+
+	falcon_read(efx, &fatal_intr, FATAL_INTR_REG_KER);
+	error = EFX_OWORD_FIELD(fatal_intr, INT_KER_ERROR);
+
+	EFX_ERR(efx, "SYSTEM ERROR " EFX_OWORD_FMT " status "
+		EFX_OWORD_FMT ": %s\n", EFX_OWORD_VAL(*int_ker),
+		EFX_OWORD_VAL(fatal_intr),
+		error ? "disabling bus mastering" : "no recognised error");
+	if (error == 0)
+		goto out;
+
+	/* If this is a memory parity error dump which blocks are offending */
+	mem_perr = EFX_OWORD_FIELD(fatal_intr, MEM_PERR_INT_KER);
+	if (mem_perr) {
+		efx_oword_t reg;
+		falcon_read(efx, &reg, MEM_STAT_REG_KER);
+		EFX_ERR(efx, "SYSTEM ERROR: memory parity error "
+			EFX_OWORD_FMT "\n", EFX_OWORD_VAL(reg));
+	}
+
+	/* Disable DMA bus mastering on both devices */
+	pci_disable_device(efx->pci_dev);
+	if (FALCON_IS_DUAL_FUNC(efx))
+		pci_disable_device(nic_data->pci_dev2);
+
+	if (++n_int_errors < FALCON_MAX_INT_ERRORS) {
+		EFX_ERR(efx, "SYSTEM ERROR - reset scheduled\n");
+		efx_schedule_reset(efx, RESET_TYPE_INT_ERROR);
+	} else {
+		EFX_ERR(efx, "SYSTEM ERROR - max number of errors seen."
+			"NIC will be disabled\n");
+		efx_schedule_reset(efx, RESET_TYPE_DISABLE);
+	}
+out:
+	return IRQ_HANDLED;
+}
+
+/* Handle a legacy interrupt from Falcon
+ * Acknowledges the interrupt and schedule event queue processing.
+ */
+static irqreturn_t falcon_legacy_interrupt_b0(int irq, void *dev_id)
+{
+	struct efx_nic *efx = (struct efx_nic *)dev_id;
+	efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr;
+	struct efx_channel *channel;
+	efx_dword_t reg;
+	u32 queues;
+	int syserr;
+
+	/* Read the ISR which also ACKs the interrupts */
+	falcon_readl(efx, &reg, INT_ISR0_B0);
+	queues = EFX_EXTRACT_DWORD(reg, 0, 31);
+
+	/* Check to see if we have a serious error condition */
+	syserr = EFX_OWORD_FIELD(*int_ker, FATAL_INT);
+	if (unlikely(syserr))
+		return falcon_fatal_interrupt(efx);
+
+	if (queues == 0)
+		return IRQ_NONE;
+
+	efx->last_irq_cpu = raw_smp_processor_id();
+	EFX_TRACE(efx, "IRQ %d on CPU %d status " EFX_DWORD_FMT "\n",
+		  irq, raw_smp_processor_id(), EFX_DWORD_VAL(reg));
+
+	/* Schedule processing of any interrupting queues */
+	channel = &efx->channel[0];
+	while (queues) {
+		if (queues & 0x01)
+			efx_schedule_channel(channel);
+		channel++;
+		queues >>= 1;
+	}
+
+	return IRQ_HANDLED;
+}
+
+
+static irqreturn_t falcon_legacy_interrupt_a1(int irq, void *dev_id)
+{
+	struct efx_nic *efx = (struct efx_nic *)dev_id;
+	efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr;
+	struct efx_channel *channel;
+	int syserr;
+	int queues;
+
+	/* Check to see if this is our interrupt.  If it isn't, we
+	 * exit without having touched the hardware.
+	 */
+	if (unlikely(EFX_OWORD_IS_ZERO(*int_ker))) {
+		EFX_TRACE(efx, "IRQ %d on CPU %d not for me\n", irq,
+			  raw_smp_processor_id());
+		return IRQ_NONE;
+	}
+	efx->last_irq_cpu = raw_smp_processor_id();
+	EFX_TRACE(efx, "IRQ %d on CPU %d status " EFX_OWORD_FMT "\n",
+		  irq, raw_smp_processor_id(), EFX_OWORD_VAL(*int_ker));
+
+	/* Check to see if we have a serious error condition */
+	syserr = EFX_OWORD_FIELD(*int_ker, FATAL_INT);
+	if (unlikely(syserr))
+		return falcon_fatal_interrupt(efx);
+
+	/* Determine interrupting queues, clear interrupt status
+	 * register and acknowledge the device interrupt.
+	 */
+	BUILD_BUG_ON(INT_EVQS_WIDTH > EFX_MAX_CHANNELS);
+	queues = EFX_OWORD_FIELD(*int_ker, INT_EVQS);
+	EFX_ZERO_OWORD(*int_ker);
+	wmb(); /* Ensure the vector is cleared before interrupt ack */
+	falcon_irq_ack_a1(efx);
+
+	/* Schedule processing of any interrupting queues */
+	channel = &efx->channel[0];
+	while (queues) {
+		if (queues & 0x01)
+			efx_schedule_channel(channel);
+		channel++;
+		queues >>= 1;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/* Handle an MSI interrupt from Falcon
+ *
+ * Handle an MSI hardware interrupt.  This routine schedules event
+ * queue processing.  No interrupt acknowledgement cycle is necessary.
+ * Also, we never need to check that the interrupt is for us, since
+ * MSI interrupts cannot be shared.
+ */
+static irqreturn_t falcon_msi_interrupt(int irq, void *dev_id)
+{
+	struct efx_channel *channel = (struct efx_channel *)dev_id;
+	struct efx_nic *efx = channel->efx;
+	efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr;
+	int syserr;
+
+	efx->last_irq_cpu = raw_smp_processor_id();
+	EFX_TRACE(efx, "IRQ %d on CPU %d status " EFX_OWORD_FMT "\n",
+		  irq, raw_smp_processor_id(), EFX_OWORD_VAL(*int_ker));
+
+	/* Check to see if we have a serious error condition */
+	syserr = EFX_OWORD_FIELD(*int_ker, FATAL_INT);
+	if (unlikely(syserr))
+		return falcon_fatal_interrupt(efx);
+
+	/* Schedule processing of the channel */
+	efx_schedule_channel(channel);
+
+	return IRQ_HANDLED;
+}
+
+
+/* Setup RSS indirection table.
+ * This maps from the hash value of the packet to RXQ
+ */
+static void falcon_setup_rss_indir_table(struct efx_nic *efx)
+{
+	int i = 0;
+	unsigned long offset;
+	efx_dword_t dword;
+
+	if (FALCON_REV(efx) < FALCON_REV_B0)
+		return;
+
+	for (offset = RX_RSS_INDIR_TBL_B0;
+	     offset < RX_RSS_INDIR_TBL_B0 + 0x800;
+	     offset += 0x10) {
+		EFX_POPULATE_DWORD_1(dword, RX_RSS_INDIR_ENT_B0,
+				     i % efx->rss_queues);
+		falcon_writel(efx, &dword, offset);
+		i++;
+	}
+}
+
+/* Hook interrupt handler(s)
+ * Try MSI and then legacy interrupts.
+ */
+int falcon_init_interrupt(struct efx_nic *efx)
+{
+	struct efx_channel *channel;
+	int rc;
+
+	if (!EFX_INT_MODE_USE_MSI(efx)) {
+		irq_handler_t handler;
+		if (FALCON_REV(efx) >= FALCON_REV_B0)
+			handler = falcon_legacy_interrupt_b0;
+		else
+			handler = falcon_legacy_interrupt_a1;
+
+		rc = request_irq(efx->legacy_irq, handler, IRQF_SHARED,
+				 efx->name, efx);
+		if (rc) {
+			EFX_ERR(efx, "failed to hook legacy IRQ %d\n",
+				efx->pci_dev->irq);
+			goto fail1;
+		}
+		return 0;
+	}
+
+	/* Hook MSI or MSI-X interrupt */
+	efx_for_each_channel_with_interrupt(channel, efx) {
+		rc = request_irq(channel->irq, falcon_msi_interrupt,
+				 IRQF_PROBE_SHARED, /* Not shared */
+				 efx->name, channel);
+		if (rc) {
+			EFX_ERR(efx, "failed to hook IRQ %d\n", channel->irq);
+			goto fail2;
+		}
+	}
+
+	return 0;
+
+ fail2:
+	efx_for_each_channel_with_interrupt(channel, efx)
+		free_irq(channel->irq, channel);
+ fail1:
+	return rc;
+}
+
+void falcon_fini_interrupt(struct efx_nic *efx)
+{
+	struct efx_channel *channel;
+	efx_oword_t reg;
+
+	/* Disable MSI/MSI-X interrupts */
+	efx_for_each_channel_with_interrupt(channel, efx)
+		if (channel->irq)
+			free_irq(channel->irq, channel);
+
+	/* ACK legacy interrupt */
+	if (FALCON_REV(efx) >= FALCON_REV_B0)
+		falcon_read(efx, &reg, INT_ISR0_B0);
+	else
+		falcon_irq_ack_a1(efx);
+
+	/* Disable legacy interrupt */
+	if (efx->legacy_irq)
+		free_irq(efx->legacy_irq, efx);
+}
+
+/**************************************************************************
+ *
+ * EEPROM/flash
+ *
+ **************************************************************************
+ */
+
+#define FALCON_SPI_MAX_LEN sizeof(efx_oword_t)
+
+/* Wait for SPI command completion */
+static int falcon_spi_wait(struct efx_nic *efx)
+{
+	efx_oword_t reg;
+	int cmd_en, timer_active;
+	int count;
+
+	count = 0;
+	do {
+		falcon_read(efx, &reg, EE_SPI_HCMD_REG_KER);
+		cmd_en = EFX_OWORD_FIELD(reg, EE_SPI_HCMD_CMD_EN);
+		timer_active = EFX_OWORD_FIELD(reg, EE_WR_TIMER_ACTIVE);
+		if (!cmd_en && !timer_active)
+			return 0;
+		udelay(10);
+	} while (++count < 10000); /* wait upto 100msec */
+	EFX_ERR(efx, "timed out waiting for SPI\n");
+	return -ETIMEDOUT;
+}
+
+static int
+falcon_spi_read(struct efx_nic *efx, int device_id, unsigned int command,
+		unsigned int address, unsigned int addr_len,
+		void *data, unsigned int len)
+{
+	efx_oword_t reg;
+	int rc;
+
+	BUG_ON(len > FALCON_SPI_MAX_LEN);
+
+	/* Check SPI not currently being accessed */
+	rc = falcon_spi_wait(efx);
+	if (rc)
+		return rc;
+
+	/* Program address register */
+	EFX_POPULATE_OWORD_1(reg, EE_SPI_HADR_ADR, address);
+	falcon_write(efx, &reg, EE_SPI_HADR_REG_KER);
+
+	/* Issue read command */
+	EFX_POPULATE_OWORD_7(reg,
+			     EE_SPI_HCMD_CMD_EN, 1,
+			     EE_SPI_HCMD_SF_SEL, device_id,
+			     EE_SPI_HCMD_DABCNT, len,
+			     EE_SPI_HCMD_READ, EE_SPI_READ,
+			     EE_SPI_HCMD_DUBCNT, 0,
+			     EE_SPI_HCMD_ADBCNT, addr_len,
+			     EE_SPI_HCMD_ENC, command);
+	falcon_write(efx, &reg, EE_SPI_HCMD_REG_KER);
+
+	/* Wait for read to complete */
+	rc = falcon_spi_wait(efx);
+	if (rc)
+		return rc;
+
+	/* Read data */
+	falcon_read(efx, &reg, EE_SPI_HDATA_REG_KER);
+	memcpy(data, &reg, len);
+	return 0;
+}
+
+/**************************************************************************
+ *
+ * MAC wrapper
+ *
+ **************************************************************************
+ */
+void falcon_drain_tx_fifo(struct efx_nic *efx)
+{
+	efx_oword_t temp;
+	int count;
+
+	if (FALCON_REV(efx) < FALCON_REV_B0)
+		return;
+
+	falcon_read(efx, &temp, MAC0_CTRL_REG_KER);
+	/* There is no point in draining more than once */
+	if (EFX_OWORD_FIELD(temp, TXFIFO_DRAIN_EN_B0))
+		return;
+
+	/* MAC stats will fail whilst the TX fifo is draining. Serialise
+	 * the drain sequence with the statistics fetch */
+	spin_lock(&efx->stats_lock);
+
+	EFX_SET_OWORD_FIELD(temp, TXFIFO_DRAIN_EN_B0, 1);
+	falcon_write(efx, &temp, MAC0_CTRL_REG_KER);
+
+	/* Reset the MAC and EM block. */
+	falcon_read(efx, &temp, GLB_CTL_REG_KER);
+	EFX_SET_OWORD_FIELD(temp, RST_XGTX, 1);
+	EFX_SET_OWORD_FIELD(temp, RST_XGRX, 1);
+	EFX_SET_OWORD_FIELD(temp, RST_EM, 1);
+	falcon_write(efx, &temp, GLB_CTL_REG_KER);
+
+	count = 0;
+	while (1) {
+		falcon_read(efx, &temp, GLB_CTL_REG_KER);
+		if (!EFX_OWORD_FIELD(temp, RST_XGTX) &&
+		    !EFX_OWORD_FIELD(temp, RST_XGRX) &&
+		    !EFX_OWORD_FIELD(temp, RST_EM)) {
+			EFX_LOG(efx, "Completed MAC reset after %d loops\n",
+				count);
+			break;
+		}
+		if (count > 20) {
+			EFX_ERR(efx, "MAC reset failed\n");
+			break;
+		}
+		count++;
+		udelay(10);
+	}
+
+	spin_unlock(&efx->stats_lock);
+
+	/* If we've reset the EM block and the link is up, then
+	 * we'll have to kick the XAUI link so the PHY can recover */
+	if (efx->link_up && EFX_WORKAROUND_5147(efx))
+		falcon_reset_xaui(efx);
+}
+
+void falcon_deconfigure_mac_wrapper(struct efx_nic *efx)
+{
+	efx_oword_t temp;
+
+	if (FALCON_REV(efx) < FALCON_REV_B0)
+		return;
+
+	/* Isolate the MAC -> RX */
+	falcon_read(efx, &temp, RX_CFG_REG_KER);
+	EFX_SET_OWORD_FIELD(temp, RX_INGR_EN_B0, 0);
+	falcon_write(efx, &temp, RX_CFG_REG_KER);
+
+	if (!efx->link_up)
+		falcon_drain_tx_fifo(efx);
+}
+
+void falcon_reconfigure_mac_wrapper(struct efx_nic *efx)
+{
+	efx_oword_t reg;
+	int link_speed;
+	unsigned int tx_fc;
+
+	if (efx->link_options & GM_LPA_10000)
+		link_speed = 0x3;
+	else if (efx->link_options & GM_LPA_1000)
+		link_speed = 0x2;
+	else if (efx->link_options & GM_LPA_100)
+		link_speed = 0x1;
+	else
+		link_speed = 0x0;
+	/* MAC_LINK_STATUS controls MAC backpressure but doesn't work
+	 * as advertised.  Disable to ensure packets are not
+	 * indefinitely held and TX queue can be flushed at any point
+	 * while the link is down. */
+	EFX_POPULATE_OWORD_5(reg,
+			     MAC_XOFF_VAL, 0xffff /* max pause time */,
+			     MAC_BCAD_ACPT, 1,
+			     MAC_UC_PROM, efx->promiscuous,
+			     MAC_LINK_STATUS, 1, /* always set */
+			     MAC_SPEED, link_speed);
+	/* On B0, MAC backpressure can be disabled and packets get
+	 * discarded. */
+	if (FALCON_REV(efx) >= FALCON_REV_B0) {
+		EFX_SET_OWORD_FIELD(reg, TXFIFO_DRAIN_EN_B0,
+				    !efx->link_up);
+	}
+
+	falcon_write(efx, &reg, MAC0_CTRL_REG_KER);
+
+	/* Restore the multicast hash registers. */
+	falcon_set_multicast_hash(efx);
+
+	/* Transmission of pause frames when RX crosses the threshold is
+	 * covered by RX_XOFF_MAC_EN and XM_TX_CFG_REG:XM_FCNTL.
+	 * Action on receipt of pause frames is controller by XM_DIS_FCNTL */
+	tx_fc = (efx->flow_control & EFX_FC_TX) ? 1 : 0;
+	falcon_read(efx, &reg, RX_CFG_REG_KER);
+	EFX_SET_OWORD_FIELD_VER(efx, reg, RX_XOFF_MAC_EN, tx_fc);
+
+	/* Unisolate the MAC -> RX */
+	if (FALCON_REV(efx) >= FALCON_REV_B0)
+		EFX_SET_OWORD_FIELD(reg, RX_INGR_EN_B0, 1);
+	falcon_write(efx, &reg, RX_CFG_REG_KER);
+}
+
+int falcon_dma_stats(struct efx_nic *efx, unsigned int done_offset)
+{
+	efx_oword_t reg;
+	u32 *dma_done;
+	int i;
+
+	if (disable_dma_stats)
+		return 0;
+
+	/* Statistics fetch will fail if the MAC is in TX drain */
+	if (FALCON_REV(efx) >= FALCON_REV_B0) {
+		efx_oword_t temp;
+		falcon_read(efx, &temp, MAC0_CTRL_REG_KER);
+		if (EFX_OWORD_FIELD(temp, TXFIFO_DRAIN_EN_B0))
+			return 0;
+	}
+
+	dma_done = (efx->stats_buffer.addr + done_offset);
+	*dma_done = FALCON_STATS_NOT_DONE;
+	wmb(); /* ensure done flag is clear */
+
+	/* Initiate DMA transfer of stats */
+	EFX_POPULATE_OWORD_2(reg,
+			     MAC_STAT_DMA_CMD, 1,
+			     MAC_STAT_DMA_ADR,
+			     efx->stats_buffer.dma_addr);
+	falcon_write(efx, &reg, MAC0_STAT_DMA_REG_KER);
+
+	/* Wait for transfer to complete */
+	for (i = 0; i < 400; i++) {
+		if (*(volatile u32 *)dma_done == FALCON_STATS_DONE)
+			return 0;
+		udelay(10);
+	}
+
+	EFX_ERR(efx, "timed out waiting for statistics\n");
+	return -ETIMEDOUT;
+}
+
+/**************************************************************************
+ *
+ * PHY access via GMII
+ *
+ **************************************************************************
+ */
+
+/* Use the top bit of the MII PHY id to indicate the PHY type
+ * (1G/10G), with the remaining bits as the actual PHY id.
+ *
+ * This allows us to avoid leaking information from the mii_if_info
+ * structure into other data structures.
+ */
+#define FALCON_PHY_ID_ID_WIDTH  EFX_WIDTH(MD_PRT_DEV_ADR)
+#define FALCON_PHY_ID_ID_MASK   ((1 << FALCON_PHY_ID_ID_WIDTH) - 1)
+#define FALCON_PHY_ID_WIDTH     (FALCON_PHY_ID_ID_WIDTH + 1)
+#define FALCON_PHY_ID_MASK      ((1 << FALCON_PHY_ID_WIDTH) - 1)
+#define FALCON_PHY_ID_10G       (1 << (FALCON_PHY_ID_WIDTH - 1))
+
+
+/* Packing the clause 45 port and device fields into a single value */
+#define MD_PRT_ADR_COMP_LBN   (MD_PRT_ADR_LBN - MD_DEV_ADR_LBN)
+#define MD_PRT_ADR_COMP_WIDTH  MD_PRT_ADR_WIDTH
+#define MD_DEV_ADR_COMP_LBN    0
+#define MD_DEV_ADR_COMP_WIDTH  MD_DEV_ADR_WIDTH
+
+
+/* Wait for GMII access to complete */
+static int falcon_gmii_wait(struct efx_nic *efx)
+{
+	efx_dword_t md_stat;
+	int count;
+
+	for (count = 0; count < 1000; count++) {	/* wait upto 10ms */
+		falcon_readl(efx, &md_stat, MD_STAT_REG_KER);
+		if (EFX_DWORD_FIELD(md_stat, MD_BSY) == 0) {
+			if (EFX_DWORD_FIELD(md_stat, MD_LNFL) != 0 ||
+			    EFX_DWORD_FIELD(md_stat, MD_BSERR) != 0) {
+				EFX_ERR(efx, "error from GMII access "
+					EFX_DWORD_FMT"\n",
+					EFX_DWORD_VAL(md_stat));
+				return -EIO;
+			}
+			return 0;
+		}
+		udelay(10);
+	}
+	EFX_ERR(efx, "timed out waiting for GMII\n");
+	return -ETIMEDOUT;
+}
+
+/* Writes a GMII register of a PHY connected to Falcon using MDIO. */
+static void falcon_mdio_write(struct net_device *net_dev, int phy_id,
+			      int addr, int value)
+{
+	struct efx_nic *efx = (struct efx_nic *)net_dev->priv;
+	unsigned int phy_id2 = phy_id & FALCON_PHY_ID_ID_MASK;
+	efx_oword_t reg;
+
+	/* The 'generic' prt/dev packing in mdio_10g.h is conveniently
+	 * chosen so that the only current user, Falcon, can take the
+	 * packed value and use them directly.
+	 * Fail to build if this assumption is broken.
+	 */
+	BUILD_BUG_ON(FALCON_PHY_ID_10G != MDIO45_XPRT_ID_IS10G);
+	BUILD_BUG_ON(FALCON_PHY_ID_ID_WIDTH != MDIO45_PRT_DEV_WIDTH);
+	BUILD_BUG_ON(MD_PRT_ADR_COMP_LBN != MDIO45_PRT_ID_COMP_LBN);
+	BUILD_BUG_ON(MD_DEV_ADR_COMP_LBN != MDIO45_DEV_ID_COMP_LBN);
+
+	if (phy_id2 == PHY_ADDR_INVALID)
+		return;
+
+	/* See falcon_mdio_read for an explanation. */
+	if (!(phy_id & FALCON_PHY_ID_10G)) {
+		int mmd = ffs(efx->phy_op->mmds) - 1;
+		EFX_TRACE(efx, "Fixing erroneous clause22 write\n");
+		phy_id2 = mdio_clause45_pack(phy_id2, mmd)
+			& FALCON_PHY_ID_ID_MASK;
+	}
+
+	EFX_REGDUMP(efx, "writing GMII %d register %02x with %04x\n", phy_id,
+		    addr, value);
+
+	spin_lock_bh(&efx->phy_lock);
+
+	/* Check MII not currently being accessed */
+	if (falcon_gmii_wait(efx) != 0)
+		goto out;
+
+	/* Write the address/ID register */
+	EFX_POPULATE_OWORD_1(reg, MD_PHY_ADR, addr);
+	falcon_write(efx, &reg, MD_PHY_ADR_REG_KER);
+
+	EFX_POPULATE_OWORD_1(reg, MD_PRT_DEV_ADR, phy_id2);
+	falcon_write(efx, &reg, MD_ID_REG_KER);
+
+	/* Write data */
+	EFX_POPULATE_OWORD_1(reg, MD_TXD, value);
+	falcon_write(efx, &reg, MD_TXD_REG_KER);
+
+	EFX_POPULATE_OWORD_2(reg,
+			     MD_WRC, 1,
+			     MD_GC, 0);
+	falcon_write(efx, &reg, MD_CS_REG_KER);
+
+	/* Wait for data to be written */
+	if (falcon_gmii_wait(efx) != 0) {
+		/* Abort the write operation */
+		EFX_POPULATE_OWORD_2(reg,
+				     MD_WRC, 0,
+				     MD_GC, 1);
+		falcon_write(efx, &reg, MD_CS_REG_KER);
+		udelay(10);
+	}
+
+ out:
+	spin_unlock_bh(&efx->phy_lock);
+}
+
+/* Reads a GMII register from a PHY connected to Falcon.  If no value
+ * could be read, -1 will be returned. */
+static int falcon_mdio_read(struct net_device *net_dev, int phy_id, int addr)
+{
+	struct efx_nic *efx = (struct efx_nic *)net_dev->priv;
+	unsigned int phy_addr = phy_id & FALCON_PHY_ID_ID_MASK;
+	efx_oword_t reg;
+	int value = -1;
+
+	if (phy_addr == PHY_ADDR_INVALID)
+		return -1;
+
+	/* Our PHY code knows whether it needs to talk clause 22(1G) or 45(10G)
+	 * but the generic Linux code does not make any distinction or have
+	 * any state for this.
+	 * We spot the case where someone tried to talk 22 to a 45 PHY and
+	 * redirect the request to the lowest numbered MMD as a clause45
+	 * request. This is enough to allow simple queries like id and link
+	 * state to succeed. TODO: We may need to do more in future.
+	 */
+	if (!(phy_id & FALCON_PHY_ID_10G)) {
+		int mmd = ffs(efx->phy_op->mmds) - 1;
+		EFX_TRACE(efx, "Fixing erroneous clause22 read\n");
+		phy_addr = mdio_clause45_pack(phy_addr, mmd)
+			& FALCON_PHY_ID_ID_MASK;
+	}
+
+	spin_lock_bh(&efx->phy_lock);
+
+	/* Check MII not currently being accessed */
+	if (falcon_gmii_wait(efx) != 0)
+		goto out;
+
+	EFX_POPULATE_OWORD_1(reg, MD_PHY_ADR, addr);
+	falcon_write(efx, &reg, MD_PHY_ADR_REG_KER);
+
+	EFX_POPULATE_OWORD_1(reg, MD_PRT_DEV_ADR, phy_addr);
+	falcon_write(efx, &reg, MD_ID_REG_KER);
+
+	/* Request data to be read */
+	EFX_POPULATE_OWORD_2(reg, MD_RDC, 1, MD_GC, 0);
+	falcon_write(efx, &reg, MD_CS_REG_KER);
+
+	/* Wait for data to become available */
+	value = falcon_gmii_wait(efx);
+	if (value == 0) {
+		falcon_read(efx, &reg, MD_RXD_REG_KER);
+		value = EFX_OWORD_FIELD(reg, MD_RXD);
+		EFX_REGDUMP(efx, "read from GMII %d register %02x, got %04x\n",
+			    phy_id, addr, value);
+	} else {
+		/* Abort the read operation */
+		EFX_POPULATE_OWORD_2(reg,
+				     MD_RIC, 0,
+				     MD_GC, 1);
+		falcon_write(efx, &reg, MD_CS_REG_KER);
+
+		EFX_LOG(efx, "read from GMII 0x%x register %02x, got "
+			"error %d\n", phy_id, addr, value);
+	}
+
+ out:
+	spin_unlock_bh(&efx->phy_lock);
+
+	return value;
+}
+
+static void falcon_init_mdio(struct mii_if_info *gmii)
+{
+	gmii->mdio_read = falcon_mdio_read;
+	gmii->mdio_write = falcon_mdio_write;
+	gmii->phy_id_mask = FALCON_PHY_ID_MASK;
+	gmii->reg_num_mask = ((1 << EFX_WIDTH(MD_PHY_ADR)) - 1);
+}
+
+static int falcon_probe_phy(struct efx_nic *efx)
+{
+	switch (efx->phy_type) {
+	case PHY_TYPE_10XPRESS:
+		efx->phy_op = &falcon_tenxpress_phy_ops;
+		break;
+	case PHY_TYPE_XFP:
+		efx->phy_op = &falcon_xfp_phy_ops;
+		break;
+	default:
+		EFX_ERR(efx, "Unknown PHY type %d\n",
+			efx->phy_type);
+		return -1;
+	}
+	return 0;
+}
+
+/* This call is responsible for hooking in the MAC and PHY operations */
+int falcon_probe_port(struct efx_nic *efx)
+{
+	int rc;
+
+	/* Hook in PHY operations table */
+	rc = falcon_probe_phy(efx);
+	if (rc)
+		return rc;
+
+	/* Set up GMII structure for PHY */
+	efx->mii.supports_gmii = 1;
+	falcon_init_mdio(&efx->mii);
+
+	/* Hardware flow ctrl. FalconA RX FIFO too small for pause generation */
+	if (FALCON_REV(efx) >= FALCON_REV_B0)
+		efx->flow_control = EFX_FC_RX | EFX_FC_TX;
+	else
+		efx->flow_control = EFX_FC_RX;
+
+	/* Allocate buffer for stats */
+	rc = falcon_alloc_buffer(efx, &efx->stats_buffer,
+				 FALCON_MAC_STATS_SIZE);
+	if (rc)
+		return rc;
+	EFX_LOG(efx, "stats buffer at %llx (virt %p phys %lx)\n",
+		(unsigned long long)efx->stats_buffer.dma_addr,
+		efx->stats_buffer.addr,
+		virt_to_phys(efx->stats_buffer.addr));
+
+	return 0;
+}
+
+void falcon_remove_port(struct efx_nic *efx)
+{
+	falcon_free_buffer(efx, &efx->stats_buffer);
+}
+
+/**************************************************************************
+ *
+ * Multicast filtering
+ *
+ **************************************************************************
+ */
+
+void falcon_set_multicast_hash(struct efx_nic *efx)
+{
+	union efx_multicast_hash *mc_hash = &efx->multicast_hash;
+
+	/* Broadcast packets go through the multicast hash filter.
+	 * ether_crc_le() of the broadcast address is 0xbe2612ff
+	 * so we always add bit 0xff to the mask.
+	 */
+	set_bit_le(0xff, mc_hash->byte);
+
+	falcon_write(efx, &mc_hash->oword[0], MAC_MCAST_HASH_REG0_KER);
+	falcon_write(efx, &mc_hash->oword[1], MAC_MCAST_HASH_REG1_KER);
+}
+
+/**************************************************************************
+ *
+ * Device reset
+ *
+ **************************************************************************
+ */
+
+/* Resets NIC to known state.  This routine must be called in process
+ * context and is allowed to sleep. */
+int falcon_reset_hw(struct efx_nic *efx, enum reset_type method)
+{
+	struct falcon_nic_data *nic_data = efx->nic_data;
+	efx_oword_t glb_ctl_reg_ker;
+	int rc;
+
+	EFX_LOG(efx, "performing hardware reset (%d)\n", method);
+
+	/* Initiate device reset */
+	if (method == RESET_TYPE_WORLD) {
+		rc = pci_save_state(efx->pci_dev);
+		if (rc) {
+			EFX_ERR(efx, "failed to backup PCI state of primary "
+				"function prior to hardware reset\n");
+			goto fail1;
+		}
+		if (FALCON_IS_DUAL_FUNC(efx)) {
+			rc = pci_save_state(nic_data->pci_dev2);
+			if (rc) {
+				EFX_ERR(efx, "failed to backup PCI state of "
+					"secondary function prior to "
+					"hardware reset\n");
+				goto fail2;
+			}
+		}
+
+		EFX_POPULATE_OWORD_2(glb_ctl_reg_ker,
+				     EXT_PHY_RST_DUR, 0x7,
+				     SWRST, 1);
+	} else {
+		int reset_phy = (method == RESET_TYPE_INVISIBLE ?
+				 EXCLUDE_FROM_RESET : 0);
+
+		EFX_POPULATE_OWORD_7(glb_ctl_reg_ker,
+				     EXT_PHY_RST_CTL, reset_phy,
+				     PCIE_CORE_RST_CTL, EXCLUDE_FROM_RESET,
+				     PCIE_NSTCK_RST_CTL, EXCLUDE_FROM_RESET,
+				     PCIE_SD_RST_CTL, EXCLUDE_FROM_RESET,
+				     EE_RST_CTL, EXCLUDE_FROM_RESET,
+				     EXT_PHY_RST_DUR, 0x7 /* 10ms */,
+				     SWRST, 1);
+	}
+	falcon_write(efx, &glb_ctl_reg_ker, GLB_CTL_REG_KER);
+
+	EFX_LOG(efx, "waiting for hardware reset\n");
+	schedule_timeout_uninterruptible(HZ / 20);
+
+	/* Restore PCI configuration if needed */
+	if (method == RESET_TYPE_WORLD) {
+		if (FALCON_IS_DUAL_FUNC(efx)) {
+			rc = pci_restore_state(nic_data->pci_dev2);
+			if (rc) {
+				EFX_ERR(efx, "failed to restore PCI config for "
+					"the secondary function\n");
+				goto fail3;
+			}
+		}
+		rc = pci_restore_state(efx->pci_dev);
+		if (rc) {
+			EFX_ERR(efx, "failed to restore PCI config for the "
+				"primary function\n");
+			goto fail4;
+		}
+		EFX_LOG(efx, "successfully restored PCI config\n");
+	}
+
+	/* Assert that reset complete */
+	falcon_read(efx, &glb_ctl_reg_ker, GLB_CTL_REG_KER);
+	if (EFX_OWORD_FIELD(glb_ctl_reg_ker, SWRST) != 0) {
+		rc = -ETIMEDOUT;
+		EFX_ERR(efx, "timed out waiting for hardware reset\n");
+		goto fail5;
+	}
+	EFX_LOG(efx, "hardware reset complete\n");
+
+	return 0;
+
+	/* pci_save_state() and pci_restore_state() MUST be called in pairs */
+fail2:
+fail3:
+	pci_restore_state(efx->pci_dev);
+fail1:
+fail4:
+fail5:
+	return rc;
+}
+
+/* Zeroes out the SRAM contents.  This routine must be called in
+ * process context and is allowed to sleep.
+ */
+static int falcon_reset_sram(struct efx_nic *efx)
+{
+	efx_oword_t srm_cfg_reg_ker, gpio_cfg_reg_ker;
+	int count;
+
+	/* Set the SRAM wake/sleep GPIO appropriately. */
+	falcon_read(efx, &gpio_cfg_reg_ker, GPIO_CTL_REG_KER);
+	EFX_SET_OWORD_FIELD(gpio_cfg_reg_ker, GPIO1_OEN, 1);
+	EFX_SET_OWORD_FIELD(gpio_cfg_reg_ker, GPIO1_OUT, 1);
+	falcon_write(efx, &gpio_cfg_reg_ker, GPIO_CTL_REG_KER);
+
+	/* Initiate SRAM reset */
+	EFX_POPULATE_OWORD_2(srm_cfg_reg_ker,
+			     SRAM_OOB_BT_INIT_EN, 1,
+			     SRM_NUM_BANKS_AND_BANK_SIZE, 0);
+	falcon_write(efx, &srm_cfg_reg_ker, SRM_CFG_REG_KER);
+
+	/* Wait for SRAM reset to complete */
+	count = 0;
+	do {
+		EFX_LOG(efx, "waiting for SRAM reset (attempt %d)...\n", count);
+
+		/* SRAM reset is slow; expect around 16ms */
+		schedule_timeout_uninterruptible(HZ / 50);
+
+		/* Check for reset complete */
+		falcon_read(efx, &srm_cfg_reg_ker, SRM_CFG_REG_KER);
+		if (!EFX_OWORD_FIELD(srm_cfg_reg_ker, SRAM_OOB_BT_INIT_EN)) {
+			EFX_LOG(efx, "SRAM reset complete\n");
+
+			return 0;
+		}
+	} while (++count < 20);	/* wait upto 0.4 sec */
+
+	EFX_ERR(efx, "timed out waiting for SRAM reset\n");
+	return -ETIMEDOUT;
+}
+
+/* Extract non-volatile configuration */
+static int falcon_probe_nvconfig(struct efx_nic *efx)
+{
+	struct falcon_nvconfig *nvconfig;
+	efx_oword_t nic_stat;
+	int device_id;
+	unsigned addr_len;
+	size_t offset, len;
+	int magic_num, struct_ver, board_rev;
+	int rc;
+
+	/* Find the boot device. */
+	falcon_read(efx, &nic_stat, NIC_STAT_REG);
+	if (EFX_OWORD_FIELD(nic_stat, SF_PRST)) {
+		device_id = EE_SPI_FLASH;
+		addr_len = 3;
+	} else if (EFX_OWORD_FIELD(nic_stat, EE_PRST)) {
+		device_id = EE_SPI_EEPROM;
+		addr_len = 2;
+	} else {
+		return -ENODEV;
+	}
+
+	nvconfig = kmalloc(sizeof(*nvconfig), GFP_KERNEL);
+
+	/* Read the whole configuration structure into memory. */
+	for (offset = 0; offset < sizeof(*nvconfig); offset += len) {
+		len = min(sizeof(*nvconfig) - offset,
+			  (size_t) FALCON_SPI_MAX_LEN);
+		rc = falcon_spi_read(efx, device_id, SPI_READ,
+				     NVCONFIG_BASE + offset, addr_len,
+				     (char *)nvconfig + offset, len);
+		if (rc)
+			goto out;
+	}
+
+	/* Read the MAC addresses */
+	memcpy(efx->mac_address, nvconfig->mac_address[0], ETH_ALEN);
+
+	/* Read the board configuration. */
+	magic_num = le16_to_cpu(nvconfig->board_magic_num);
+	struct_ver = le16_to_cpu(nvconfig->board_struct_ver);
+
+	if (magic_num != NVCONFIG_BOARD_MAGIC_NUM || struct_ver < 2) {
+		EFX_ERR(efx, "Non volatile memory bad magic=%x ver=%x "
+			"therefore using defaults\n", magic_num, struct_ver);
+		efx->phy_type = PHY_TYPE_NONE;
+		efx->mii.phy_id = PHY_ADDR_INVALID;
+		board_rev = 0;
+	} else {
+		struct falcon_nvconfig_board_v2 *v2 = &nvconfig->board_v2;
+
+		efx->phy_type = v2->port0_phy_type;
+		efx->mii.phy_id = v2->port0_phy_addr;
+		board_rev = le16_to_cpu(v2->board_revision);
+	}
+
+	EFX_LOG(efx, "PHY is %d phy_id %d\n", efx->phy_type, efx->mii.phy_id);
+
+	efx_set_board_info(efx, board_rev);
+
+ out:
+	kfree(nvconfig);
+	return rc;
+}
+
+/* Probe the NIC variant (revision, ASIC vs FPGA, function count, port
+ * count, port speed).  Set workaround and feature flags accordingly.
+ */
+static int falcon_probe_nic_variant(struct efx_nic *efx)
+{
+	efx_oword_t altera_build;
+
+	falcon_read(efx, &altera_build, ALTERA_BUILD_REG_KER);
+	if (EFX_OWORD_FIELD(altera_build, VER_ALL)) {
+		EFX_ERR(efx, "Falcon FPGA not supported\n");
+		return -ENODEV;
+	}
+
+	switch (FALCON_REV(efx)) {
+	case FALCON_REV_A0:
+	case 0xff:
+		EFX_ERR(efx, "Falcon rev A0 not supported\n");
+		return -ENODEV;
+
+	case FALCON_REV_A1:{
+		efx_oword_t nic_stat;
+
+		falcon_read(efx, &nic_stat, NIC_STAT_REG);
+
+		if (EFX_OWORD_FIELD(nic_stat, STRAP_PCIE) == 0) {
+			EFX_ERR(efx, "Falcon rev A1 PCI-X not supported\n");
+			return -ENODEV;
+		}
+		if (!EFX_OWORD_FIELD(nic_stat, STRAP_10G)) {
+			EFX_ERR(efx, "1G mode not supported\n");
+			return -ENODEV;
+		}
+		break;
+	}
+
+	case FALCON_REV_B0:
+		break;
+
+	default:
+		EFX_ERR(efx, "Unknown Falcon rev %d\n", FALCON_REV(efx));
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+int falcon_probe_nic(struct efx_nic *efx)
+{
+	struct falcon_nic_data *nic_data;
+	int rc;
+
+	/* Initialise I2C interface state */
+	efx->i2c.efx = efx;
+	efx->i2c.op = &falcon_i2c_bit_operations;
+	efx->i2c.sda = 1;
+	efx->i2c.scl = 1;
+
+	/* Allocate storage for hardware specific data */
+	nic_data = kzalloc(sizeof(*nic_data), GFP_KERNEL);
+	efx->nic_data = (void *) nic_data;
+
+	/* Determine number of ports etc. */
+	rc = falcon_probe_nic_variant(efx);
+	if (rc)
+		goto fail1;
+
+	/* Probe secondary function if expected */
+	if (FALCON_IS_DUAL_FUNC(efx)) {
+		struct pci_dev *dev = pci_dev_get(efx->pci_dev);
+
+		while ((dev = pci_get_device(EFX_VENDID_SFC, FALCON_A_S_DEVID,
+					     dev))) {
+			if (dev->bus == efx->pci_dev->bus &&
+			    dev->devfn == efx->pci_dev->devfn + 1) {
+				nic_data->pci_dev2 = dev;
+				break;
+			}
+		}
+		if (!nic_data->pci_dev2) {
+			EFX_ERR(efx, "failed to find secondary function\n");
+			rc = -ENODEV;
+			goto fail2;
+		}
+	}
+
+	/* Now we can reset the NIC */
+	rc = falcon_reset_hw(efx, RESET_TYPE_ALL);
+	if (rc) {
+		EFX_ERR(efx, "failed to reset NIC\n");
+		goto fail3;
+	}
+
+	/* Allocate memory for INT_KER */
+	rc = falcon_alloc_buffer(efx, &efx->irq_status, sizeof(efx_oword_t));
+	if (rc)
+		goto fail4;
+	BUG_ON(efx->irq_status.dma_addr & 0x0f);
+
+	EFX_LOG(efx, "INT_KER at %llx (virt %p phys %lx)\n",
+		(unsigned long long)efx->irq_status.dma_addr,
+		efx->irq_status.addr, virt_to_phys(efx->irq_status.addr));
+
+	/* Read in the non-volatile configuration */
+	rc = falcon_probe_nvconfig(efx);
+	if (rc)
+		goto fail5;
+
+	return 0;
+
+ fail5:
+	falcon_free_buffer(efx, &efx->irq_status);
+ fail4:
+	/* fall-thru */
+ fail3:
+	if (nic_data->pci_dev2) {
+		pci_dev_put(nic_data->pci_dev2);
+		nic_data->pci_dev2 = NULL;
+	}
+ fail2:
+	/* fall-thru */
+ fail1:
+	kfree(efx->nic_data);
+	return rc;
+}
+
+/* This call performs hardware-specific global initialisation, such as
+ * defining the descriptor cache sizes and number of RSS channels.
+ * It does not set up any buffers, descriptor rings or event queues.
+ */
+int falcon_init_nic(struct efx_nic *efx)
+{
+	struct falcon_nic_data *data;
+	efx_oword_t temp;
+	unsigned thresh;
+	int rc;
+
+	data = (struct falcon_nic_data *)efx->nic_data;
+
+	/* Set up the address region register. This is only needed
+	 * for the B0 FPGA, but since we are just pushing in the
+	 * reset defaults this may as well be unconditional. */
+	EFX_POPULATE_OWORD_4(temp, ADR_REGION0, 0,
+				   ADR_REGION1, (1 << 16),
+				   ADR_REGION2, (2 << 16),
+				   ADR_REGION3, (3 << 16));
+	falcon_write(efx, &temp, ADR_REGION_REG_KER);
+
+	/* Use on-chip SRAM */
+	falcon_read(efx, &temp, NIC_STAT_REG);
+	EFX_SET_OWORD_FIELD(temp, ONCHIP_SRAM, 1);
+	falcon_write(efx, &temp, NIC_STAT_REG);
+
+	/* Set buffer table mode */
+	EFX_POPULATE_OWORD_1(temp, BUF_TBL_MODE, BUF_TBL_MODE_FULL);
+	falcon_write(efx, &temp, BUF_TBL_CFG_REG_KER);
+
+	rc = falcon_reset_sram(efx);
+	if (rc)
+		return rc;
+
+	/* Set positions of descriptor caches in SRAM. */
+	EFX_POPULATE_OWORD_1(temp, SRM_TX_DC_BASE_ADR, TX_DC_BASE / 8);
+	falcon_write(efx, &temp, SRM_TX_DC_CFG_REG_KER);
+	EFX_POPULATE_OWORD_1(temp, SRM_RX_DC_BASE_ADR, RX_DC_BASE / 8);
+	falcon_write(efx, &temp, SRM_RX_DC_CFG_REG_KER);
+
+	/* Set TX descriptor cache size. */
+	BUILD_BUG_ON(TX_DC_ENTRIES != (16 << TX_DC_ENTRIES_ORDER));
+	EFX_POPULATE_OWORD_1(temp, TX_DC_SIZE, TX_DC_ENTRIES_ORDER);
+	falcon_write(efx, &temp, TX_DC_CFG_REG_KER);
+
+	/* Set RX descriptor cache size.  Set low watermark to size-8, as
+	 * this allows most efficient prefetching.
+	 */
+	BUILD_BUG_ON(RX_DC_ENTRIES != (16 << RX_DC_ENTRIES_ORDER));
+	EFX_POPULATE_OWORD_1(temp, RX_DC_SIZE, RX_DC_ENTRIES_ORDER);
+	falcon_write(efx, &temp, RX_DC_CFG_REG_KER);
+	EFX_POPULATE_OWORD_1(temp, RX_DC_PF_LWM, RX_DC_ENTRIES - 8);
+	falcon_write(efx, &temp, RX_DC_PF_WM_REG_KER);
+
+	/* Clear the parity enables on the TX data fifos as
+	 * they produce false parity errors because of timing issues
+	 */
+	if (EFX_WORKAROUND_5129(efx)) {
+		falcon_read(efx, &temp, SPARE_REG_KER);
+		EFX_SET_OWORD_FIELD(temp, MEM_PERR_EN_TX_DATA, 0);
+		falcon_write(efx, &temp, SPARE_REG_KER);
+	}
+
+	/* Enable all the genuinely fatal interrupts.  (They are still
+	 * masked by the overall interrupt mask, controlled by
+	 * falcon_interrupts()).
+	 *
+	 * Note: All other fatal interrupts are enabled
+	 */
+	EFX_POPULATE_OWORD_3(temp,
+			     ILL_ADR_INT_KER_EN, 1,
+			     RBUF_OWN_INT_KER_EN, 1,
+			     TBUF_OWN_INT_KER_EN, 1);
+	EFX_INVERT_OWORD(temp);
+	falcon_write(efx, &temp, FATAL_INTR_REG_KER);
+
+	/* Set number of RSS queues for receive path. */
+	falcon_read(efx, &temp, RX_FILTER_CTL_REG);
+	if (FALCON_REV(efx) >= FALCON_REV_B0)
+		EFX_SET_OWORD_FIELD(temp, NUM_KER, 0);
+	else
+		EFX_SET_OWORD_FIELD(temp, NUM_KER, efx->rss_queues - 1);
+	if (EFX_WORKAROUND_7244(efx)) {
+		EFX_SET_OWORD_FIELD(temp, UDP_FULL_SRCH_LIMIT, 8);
+		EFX_SET_OWORD_FIELD(temp, UDP_WILD_SRCH_LIMIT, 8);
+		EFX_SET_OWORD_FIELD(temp, TCP_FULL_SRCH_LIMIT, 8);
+		EFX_SET_OWORD_FIELD(temp, TCP_WILD_SRCH_LIMIT, 8);
+	}
+	falcon_write(efx, &temp, RX_FILTER_CTL_REG);
+
+	falcon_setup_rss_indir_table(efx);
+
+	/* Setup RX.  Wait for descriptor is broken and must
+	 * be disabled.  RXDP recovery shouldn't be needed, but is.
+	 */
+	falcon_read(efx, &temp, RX_SELF_RST_REG_KER);
+	EFX_SET_OWORD_FIELD(temp, RX_NODESC_WAIT_DIS, 1);
+	EFX_SET_OWORD_FIELD(temp, RX_RECOVERY_EN, 1);
+	if (EFX_WORKAROUND_5583(efx))
+		EFX_SET_OWORD_FIELD(temp, RX_ISCSI_DIS, 1);
+	falcon_write(efx, &temp, RX_SELF_RST_REG_KER);
+
+	/* Disable the ugly timer-based TX DMA backoff and allow TX DMA to be
+	 * controlled by the RX FIFO fill level. Set arbitration to one pkt/Q.
+	 */
+	falcon_read(efx, &temp, TX_CFG2_REG_KER);
+	EFX_SET_OWORD_FIELD(temp, TX_RX_SPACER, 0xfe);
+	EFX_SET_OWORD_FIELD(temp, TX_RX_SPACER_EN, 1);
+	EFX_SET_OWORD_FIELD(temp, TX_ONE_PKT_PER_Q, 1);
+	EFX_SET_OWORD_FIELD(temp, TX_CSR_PUSH_EN, 0);
+	EFX_SET_OWORD_FIELD(temp, TX_DIS_NON_IP_EV, 1);
+	/* Enable SW_EV to inherit in char driver - assume harmless here */
+	EFX_SET_OWORD_FIELD(temp, TX_SW_EV_EN, 1);
+	/* Prefetch threshold 2 => fetch when descriptor cache half empty */
+	EFX_SET_OWORD_FIELD(temp, TX_PREF_THRESHOLD, 2);
+	/* Squash TX of packets of 16 bytes or less */
+	if (FALCON_REV(efx) >= FALCON_REV_B0 && EFX_WORKAROUND_9141(efx))
+		EFX_SET_OWORD_FIELD(temp, TX_FLUSH_MIN_LEN_EN_B0, 1);
+	falcon_write(efx, &temp, TX_CFG2_REG_KER);
+
+	/* Do not enable TX_NO_EOP_DISC_EN, since it limits packets to 16
+	 * descriptors (which is bad).
+	 */
+	falcon_read(efx, &temp, TX_CFG_REG_KER);
+	EFX_SET_OWORD_FIELD(temp, TX_NO_EOP_DISC_EN, 0);
+	falcon_write(efx, &temp, TX_CFG_REG_KER);
+
+	/* RX config */
+	falcon_read(efx, &temp, RX_CFG_REG_KER);
+	EFX_SET_OWORD_FIELD_VER(efx, temp, RX_DESC_PUSH_EN, 0);
+	if (EFX_WORKAROUND_7575(efx))
+		EFX_SET_OWORD_FIELD_VER(efx, temp, RX_USR_BUF_SIZE,
+					(3 * 4096) / 32);
+	if (FALCON_REV(efx) >= FALCON_REV_B0)
+		EFX_SET_OWORD_FIELD(temp, RX_INGR_EN_B0, 1);
+
+	/* RX FIFO flow control thresholds */
+	thresh = ((rx_xon_thresh_bytes >= 0) ?
+		  rx_xon_thresh_bytes : efx->type->rx_xon_thresh);
+	EFX_SET_OWORD_FIELD_VER(efx, temp, RX_XON_MAC_TH, thresh / 256);
+	thresh = ((rx_xoff_thresh_bytes >= 0) ?
+		  rx_xoff_thresh_bytes : efx->type->rx_xoff_thresh);
+	EFX_SET_OWORD_FIELD_VER(efx, temp, RX_XOFF_MAC_TH, thresh / 256);
+	/* RX control FIFO thresholds [32 entries] */
+	EFX_SET_OWORD_FIELD_VER(efx, temp, RX_XON_TX_TH, 25);
+	EFX_SET_OWORD_FIELD_VER(efx, temp, RX_XOFF_TX_TH, 20);
+	falcon_write(efx, &temp, RX_CFG_REG_KER);
+
+	/* Set destination of both TX and RX Flush events */
+	if (FALCON_REV(efx) >= FALCON_REV_B0) {
+		EFX_POPULATE_OWORD_1(temp, FLS_EVQ_ID, 0);
+		falcon_write(efx, &temp, DP_CTRL_REG);
+	}
+
+	return 0;
+}
+
+void falcon_remove_nic(struct efx_nic *efx)
+{
+	struct falcon_nic_data *nic_data = efx->nic_data;
+
+	falcon_free_buffer(efx, &efx->irq_status);
+
+	(void) falcon_reset_hw(efx, RESET_TYPE_ALL);
+
+	/* Release the second function after the reset */
+	if (nic_data->pci_dev2) {
+		pci_dev_put(nic_data->pci_dev2);
+		nic_data->pci_dev2 = NULL;
+	}
+
+	/* Tear down the private nic state */
+	kfree(efx->nic_data);
+	efx->nic_data = NULL;
+}
+
+void falcon_update_nic_stats(struct efx_nic *efx)
+{
+	efx_oword_t cnt;
+
+	falcon_read(efx, &cnt, RX_NODESC_DROP_REG_KER);
+	efx->n_rx_nodesc_drop_cnt += EFX_OWORD_FIELD(cnt, RX_NODESC_DROP_CNT);
+}
+
+/**************************************************************************
+ *
+ * Revision-dependent attributes used by efx.c
+ *
+ **************************************************************************
+ */
+
+struct efx_nic_type falcon_a_nic_type = {
+	.mem_bar = 2,
+	.mem_map_size = 0x20000,
+	.txd_ptr_tbl_base = TX_DESC_PTR_TBL_KER_A1,
+	.rxd_ptr_tbl_base = RX_DESC_PTR_TBL_KER_A1,
+	.buf_tbl_base = BUF_TBL_KER_A1,
+	.evq_ptr_tbl_base = EVQ_PTR_TBL_KER_A1,
+	.evq_rptr_tbl_base = EVQ_RPTR_REG_KER_A1,
+	.txd_ring_mask = FALCON_TXD_RING_MASK,
+	.rxd_ring_mask = FALCON_RXD_RING_MASK,
+	.evq_size = FALCON_EVQ_SIZE,
+	.max_dma_mask = FALCON_DMA_MASK,
+	.tx_dma_mask = FALCON_TX_DMA_MASK,
+	.bug5391_mask = 0xf,
+	.rx_xoff_thresh = 2048,
+	.rx_xon_thresh = 512,
+	.rx_buffer_padding = 0x24,
+	.max_interrupt_mode = EFX_INT_MODE_MSI,
+	.phys_addr_channels = 4,
+};
+
+struct efx_nic_type falcon_b_nic_type = {
+	.mem_bar = 2,
+	/* Map everything up to and including the RSS indirection
+	 * table.  Don't map MSI-X table, MSI-X PBA since Linux
+	 * requires that they not be mapped.  */
+	.mem_map_size = RX_RSS_INDIR_TBL_B0 + 0x800,
+	.txd_ptr_tbl_base = TX_DESC_PTR_TBL_KER_B0,
+	.rxd_ptr_tbl_base = RX_DESC_PTR_TBL_KER_B0,
+	.buf_tbl_base = BUF_TBL_KER_B0,
+	.evq_ptr_tbl_base = EVQ_PTR_TBL_KER_B0,
+	.evq_rptr_tbl_base = EVQ_RPTR_REG_KER_B0,
+	.txd_ring_mask = FALCON_TXD_RING_MASK,
+	.rxd_ring_mask = FALCON_RXD_RING_MASK,
+	.evq_size = FALCON_EVQ_SIZE,
+	.max_dma_mask = FALCON_DMA_MASK,
+	.tx_dma_mask = FALCON_TX_DMA_MASK,
+	.bug5391_mask = 0,
+	.rx_xoff_thresh = 54272, /* ~80Kb - 3*max MTU */
+	.rx_xon_thresh = 27648,  /* ~3*max MTU */
+	.rx_buffer_padding = 0,
+	.max_interrupt_mode = EFX_INT_MODE_MSIX,
+	.phys_addr_channels = 32, /* Hardware limit is 64, but the legacy
+				   * interrupt handler only supports 32
+				   * channels */
+};
+
diff --git a/drivers/net/sfc/falcon.h b/drivers/net/sfc/falcon.h
new file mode 100644
index 0000000..6117403
--- /dev/null
+++ b/drivers/net/sfc/falcon.h
@@ -0,0 +1,130 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2006-2008 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_FALCON_H
+#define EFX_FALCON_H
+
+#include "net_driver.h"
+
+/*
+ * Falcon hardware control
+ */
+
+enum falcon_revision {
+	FALCON_REV_A0 = 0,
+	FALCON_REV_A1 = 1,
+	FALCON_REV_B0 = 2,
+};
+
+#define FALCON_REV(efx) ((efx)->pci_dev->revision)
+
+extern struct efx_nic_type falcon_a_nic_type;
+extern struct efx_nic_type falcon_b_nic_type;
+
+/**************************************************************************
+ *
+ * Externs
+ *
+ **************************************************************************
+ */
+
+/* TX data path */
+extern int falcon_probe_tx(struct efx_tx_queue *tx_queue);
+extern int falcon_init_tx(struct efx_tx_queue *tx_queue);
+extern void falcon_fini_tx(struct efx_tx_queue *tx_queue);
+extern void falcon_remove_tx(struct efx_tx_queue *tx_queue);
+extern void falcon_push_buffers(struct efx_tx_queue *tx_queue);
+
+/* RX data path */
+extern int falcon_probe_rx(struct efx_rx_queue *rx_queue);
+extern int falcon_init_rx(struct efx_rx_queue *rx_queue);
+extern void falcon_fini_rx(struct efx_rx_queue *rx_queue);
+extern void falcon_remove_rx(struct efx_rx_queue *rx_queue);
+extern void falcon_notify_rx_desc(struct efx_rx_queue *rx_queue);
+
+/* Event data path */
+extern int falcon_probe_eventq(struct efx_channel *channel);
+extern int falcon_init_eventq(struct efx_channel *channel);
+extern void falcon_fini_eventq(struct efx_channel *channel);
+extern void falcon_remove_eventq(struct efx_channel *channel);
+extern int falcon_process_eventq(struct efx_channel *channel, int *rx_quota);
+extern void falcon_eventq_read_ack(struct efx_channel *channel);
+
+/* Ports */
+extern int falcon_probe_port(struct efx_nic *efx);
+extern void falcon_remove_port(struct efx_nic *efx);
+
+/* MAC/PHY */
+extern int falcon_xaui_link_ok(struct efx_nic *efx);
+extern int falcon_dma_stats(struct efx_nic *efx,
+			    unsigned int done_offset);
+extern void falcon_drain_tx_fifo(struct efx_nic *efx);
+extern void falcon_deconfigure_mac_wrapper(struct efx_nic *efx);
+extern void falcon_reconfigure_mac_wrapper(struct efx_nic *efx);
+
+/* Interrupts and test events */
+extern int falcon_init_interrupt(struct efx_nic *efx);
+extern void falcon_enable_interrupts(struct efx_nic *efx);
+extern void falcon_generate_test_event(struct efx_channel *channel,
+				       unsigned int magic);
+extern void falcon_generate_interrupt(struct efx_nic *efx);
+extern void falcon_set_int_moderation(struct efx_channel *channel);
+extern void falcon_disable_interrupts(struct efx_nic *efx);
+extern void falcon_fini_interrupt(struct efx_nic *efx);
+
+/* Global Resources */
+extern int falcon_probe_nic(struct efx_nic *efx);
+extern int falcon_probe_resources(struct efx_nic *efx);
+extern int falcon_init_nic(struct efx_nic *efx);
+extern int falcon_reset_hw(struct efx_nic *efx, enum reset_type method);
+extern void falcon_remove_resources(struct efx_nic *efx);
+extern void falcon_remove_nic(struct efx_nic *efx);
+extern void falcon_update_nic_stats(struct efx_nic *efx);
+extern void falcon_set_multicast_hash(struct efx_nic *efx);
+extern int falcon_reset_xaui(struct efx_nic *efx);
+
+/**************************************************************************
+ *
+ * Falcon MAC stats
+ *
+ **************************************************************************
+ */
+
+#define FALCON_STAT_OFFSET(falcon_stat) EFX_VAL(falcon_stat, offset)
+#define FALCON_STAT_WIDTH(falcon_stat) EFX_VAL(falcon_stat, WIDTH)
+
+/* Retrieve statistic from statistics block */
+#define FALCON_STAT(efx, falcon_stat, efx_stat) do {		\
+	if (FALCON_STAT_WIDTH(falcon_stat) == 16)		\
+		(efx)->mac_stats.efx_stat += le16_to_cpu(	\
+			*((__force __le16 *)				\
+			  (efx->stats_buffer.addr +		\
+			   FALCON_STAT_OFFSET(falcon_stat))));	\
+	else if (FALCON_STAT_WIDTH(falcon_stat) == 32)		\
+		(efx)->mac_stats.efx_stat += le32_to_cpu(	\
+			*((__force __le32 *)				\
+			  (efx->stats_buffer.addr +		\
+			   FALCON_STAT_OFFSET(falcon_stat))));	\
+	else							\
+		(efx)->mac_stats.efx_stat += le64_to_cpu(	\
+			*((__force __le64 *)				\
+			  (efx->stats_buffer.addr +		\
+			   FALCON_STAT_OFFSET(falcon_stat))));	\
+	} while (0)
+
+#define FALCON_MAC_STATS_SIZE 0x100
+
+#define MAC_DATA_LBN 0
+#define MAC_DATA_WIDTH 32
+
+extern void falcon_generate_event(struct efx_channel *channel,
+				  efx_qword_t *event);
+
+#endif /* EFX_FALCON_H */
diff --git a/drivers/net/sfc/falcon_hwdefs.h b/drivers/net/sfc/falcon_hwdefs.h
new file mode 100644
index 0000000..0485a63
--- /dev/null
+++ b/drivers/net/sfc/falcon_hwdefs.h
@@ -0,0 +1,1135 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2006-2008 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_FALCON_HWDEFS_H
+#define EFX_FALCON_HWDEFS_H
+
+/*
+ * Falcon hardware value definitions.
+ * Falcon is the internal codename for the SFC4000 controller that is
+ * present in SFE400X evaluation boards
+ */
+
+/**************************************************************************
+ *
+ * Falcon registers
+ *
+ **************************************************************************
+ */
+
+/* Address region register */
+#define ADR_REGION_REG_KER	0x00
+#define ADR_REGION0_LBN	0
+#define ADR_REGION0_WIDTH	18
+#define ADR_REGION1_LBN	32
+#define ADR_REGION1_WIDTH	18
+#define ADR_REGION2_LBN	64
+#define ADR_REGION2_WIDTH	18
+#define ADR_REGION3_LBN	96
+#define ADR_REGION3_WIDTH	18
+
+/* Interrupt enable register */
+#define INT_EN_REG_KER 0x0010
+#define KER_INT_KER_LBN 3
+#define KER_INT_KER_WIDTH 1
+#define DRV_INT_EN_KER_LBN 0
+#define DRV_INT_EN_KER_WIDTH 1
+
+/* Interrupt status address register */
+#define INT_ADR_REG_KER	0x0030
+#define NORM_INT_VEC_DIS_KER_LBN 64
+#define NORM_INT_VEC_DIS_KER_WIDTH 1
+#define INT_ADR_KER_LBN 0
+#define INT_ADR_KER_WIDTH EFX_DMA_TYPE_WIDTH(64) /* not 46 for this one */
+
+/* Interrupt status register (B0 only) */
+#define INT_ISR0_B0 0x90
+#define INT_ISR1_B0 0xA0
+
+/* Interrupt acknowledge register (A0/A1 only) */
+#define INT_ACK_REG_KER_A1 0x0050
+#define INT_ACK_DUMMY_DATA_LBN 0
+#define INT_ACK_DUMMY_DATA_WIDTH 32
+
+/* Interrupt acknowledge work-around register (A0/A1 only )*/
+#define WORK_AROUND_BROKEN_PCI_READS_REG_KER_A1 0x0070
+
+/* SPI host command register */
+#define EE_SPI_HCMD_REG_KER 0x0100
+#define EE_SPI_HCMD_CMD_EN_LBN 31
+#define EE_SPI_HCMD_CMD_EN_WIDTH 1
+#define EE_WR_TIMER_ACTIVE_LBN 28
+#define EE_WR_TIMER_ACTIVE_WIDTH 1
+#define EE_SPI_HCMD_SF_SEL_LBN 24
+#define EE_SPI_HCMD_SF_SEL_WIDTH 1
+#define EE_SPI_EEPROM 0
+#define EE_SPI_FLASH 1
+#define EE_SPI_HCMD_DABCNT_LBN 16
+#define EE_SPI_HCMD_DABCNT_WIDTH 5
+#define EE_SPI_HCMD_READ_LBN 15
+#define EE_SPI_HCMD_READ_WIDTH 1
+#define EE_SPI_READ 1
+#define EE_SPI_WRITE 0
+#define EE_SPI_HCMD_DUBCNT_LBN 12
+#define EE_SPI_HCMD_DUBCNT_WIDTH 2
+#define EE_SPI_HCMD_ADBCNT_LBN 8
+#define EE_SPI_HCMD_ADBCNT_WIDTH 2
+#define EE_SPI_HCMD_ENC_LBN 0
+#define EE_SPI_HCMD_ENC_WIDTH 8
+
+/* SPI host address register */
+#define EE_SPI_HADR_REG_KER 0x0110
+#define EE_SPI_HADR_ADR_LBN 0
+#define EE_SPI_HADR_ADR_WIDTH 24
+
+/* SPI host data register */
+#define EE_SPI_HDATA_REG_KER 0x0120
+
+/* PCIE CORE ACCESS REG */
+#define PCIE_CORE_ADDR_PCIE_DEVICE_CTRL_STAT 0x68
+#define PCIE_CORE_ADDR_PCIE_LINK_CTRL_STAT 0x70
+#define PCIE_CORE_ADDR_ACK_RPL_TIMER 0x700
+#define PCIE_CORE_ADDR_ACK_FREQ 0x70C
+
+/* NIC status register */
+#define NIC_STAT_REG 0x0200
+#define ONCHIP_SRAM_LBN 16
+#define ONCHIP_SRAM_WIDTH 1
+#define SF_PRST_LBN 9
+#define SF_PRST_WIDTH 1
+#define EE_PRST_LBN 8
+#define EE_PRST_WIDTH 1
+/* See pic_mode_t for decoding of this field */
+/* These bit definitions are extrapolated from the list of numerical
+ * values for STRAP_PINS.
+ */
+#define STRAP_10G_LBN 2
+#define STRAP_10G_WIDTH 1
+#define STRAP_PCIE_LBN 0
+#define STRAP_PCIE_WIDTH 1
+
+/* GPIO control register */
+#define GPIO_CTL_REG_KER 0x0210
+#define GPIO_OUTPUTS_LBN   (16)
+#define GPIO_OUTPUTS_WIDTH (4)
+#define GPIO_INPUTS_LBN (8)
+#define GPIO_DIRECTION_LBN (24)
+#define GPIO_DIRECTION_WIDTH (4)
+#define GPIO_DIRECTION_OUT (1)
+#define GPIO_SRAM_SLEEP (1 << 1)
+
+#define GPIO3_OEN_LBN (GPIO_DIRECTION_LBN + 3)
+#define	GPIO3_OEN_WIDTH 1
+#define	GPIO2_OEN_LBN (GPIO_DIRECTION_LBN + 2)
+#define	GPIO2_OEN_WIDTH 1
+#define	GPIO1_OEN_LBN (GPIO_DIRECTION_LBN + 1)
+#define	GPIO1_OEN_WIDTH 1
+#define GPIO0_OEN_LBN (GPIO_DIRECTION_LBN + 0)
+#define	GPIO0_OEN_WIDTH 1
+
+#define	GPIO3_OUT_LBN (GPIO_OUTPUTS_LBN + 3)
+#define	GPIO3_OUT_WIDTH 1
+#define	GPIO2_OUT_LBN (GPIO_OUTPUTS_LBN + 2)
+#define	GPIO2_OUT_WIDTH 1
+#define	GPIO1_OUT_LBN (GPIO_OUTPUTS_LBN + 1)
+#define	GPIO1_OUT_WIDTH 1
+#define	GPIO0_OUT_LBN (GPIO_OUTPUTS_LBN + 0)
+#define	GPIO0_OUT_WIDTH 1
+
+#define GPIO3_IN_LBN (GPIO_INPUTS_LBN + 3)
+#define	GPIO3_IN_WIDTH 1
+#define	GPIO2_IN_WIDTH 1
+#define	GPIO1_IN_WIDTH 1
+#define GPIO0_IN_LBN (GPIO_INPUTS_LBN + 0)
+#define	GPIO0_IN_WIDTH 1
+
+/* Global control register */
+#define GLB_CTL_REG_KER	0x0220
+#define EXT_PHY_RST_CTL_LBN 63
+#define EXT_PHY_RST_CTL_WIDTH 1
+#define PCIE_SD_RST_CTL_LBN 61
+#define PCIE_SD_RST_CTL_WIDTH 1
+
+#define PCIE_NSTCK_RST_CTL_LBN 58
+#define PCIE_NSTCK_RST_CTL_WIDTH 1
+#define PCIE_CORE_RST_CTL_LBN 57
+#define PCIE_CORE_RST_CTL_WIDTH 1
+#define EE_RST_CTL_LBN 49
+#define EE_RST_CTL_WIDTH 1
+#define RST_XGRX_LBN 24
+#define RST_XGRX_WIDTH 1
+#define RST_XGTX_LBN 23
+#define RST_XGTX_WIDTH 1
+#define RST_EM_LBN 22
+#define RST_EM_WIDTH 1
+#define EXT_PHY_RST_DUR_LBN 1
+#define EXT_PHY_RST_DUR_WIDTH 3
+#define SWRST_LBN 0
+#define SWRST_WIDTH 1
+#define INCLUDE_IN_RESET 0
+#define EXCLUDE_FROM_RESET 1
+
+/* Fatal interrupt register */
+#define FATAL_INTR_REG_KER 0x0230
+#define RBUF_OWN_INT_KER_EN_LBN 39
+#define RBUF_OWN_INT_KER_EN_WIDTH 1
+#define TBUF_OWN_INT_KER_EN_LBN 38
+#define TBUF_OWN_INT_KER_EN_WIDTH 1
+#define ILL_ADR_INT_KER_EN_LBN 33
+#define ILL_ADR_INT_KER_EN_WIDTH 1
+#define MEM_PERR_INT_KER_LBN 8
+#define MEM_PERR_INT_KER_WIDTH 1
+#define INT_KER_ERROR_LBN 0
+#define INT_KER_ERROR_WIDTH 12
+
+#define DP_CTRL_REG 0x250
+#define FLS_EVQ_ID_LBN 0
+#define FLS_EVQ_ID_WIDTH 11
+
+#define MEM_STAT_REG_KER 0x260
+
+/* Debug probe register */
+#define DEBUG_BLK_SEL_MISC 7
+#define DEBUG_BLK_SEL_SERDES 6
+#define DEBUG_BLK_SEL_EM 5
+#define DEBUG_BLK_SEL_SR 4
+#define DEBUG_BLK_SEL_EV 3
+#define DEBUG_BLK_SEL_RX 2
+#define DEBUG_BLK_SEL_TX 1
+#define DEBUG_BLK_SEL_BIU 0
+
+/* FPGA build version */
+#define ALTERA_BUILD_REG_KER 0x0300
+#define VER_ALL_LBN 0
+#define VER_ALL_WIDTH 32
+
+/* Spare EEPROM bits register (flash 0x390) */
+#define SPARE_REG_KER 0x310
+#define MEM_PERR_EN_TX_DATA_LBN 72
+#define MEM_PERR_EN_TX_DATA_WIDTH 2
+
+/* Timer table for kernel access */
+#define TIMER_CMD_REG_KER 0x420
+#define TIMER_MODE_LBN 12
+#define TIMER_MODE_WIDTH 2
+#define TIMER_MODE_DIS 0
+#define TIMER_MODE_INT_HLDOFF 2
+#define TIMER_VAL_LBN 0
+#define TIMER_VAL_WIDTH 12
+
+/* Driver generated event register */
+#define DRV_EV_REG_KER 0x440
+#define DRV_EV_QID_LBN 64
+#define DRV_EV_QID_WIDTH 12
+#define DRV_EV_DATA_LBN 0
+#define DRV_EV_DATA_WIDTH 64
+
+/* Buffer table configuration register */
+#define BUF_TBL_CFG_REG_KER 0x600
+#define BUF_TBL_MODE_LBN 3
+#define BUF_TBL_MODE_WIDTH 1
+#define BUF_TBL_MODE_HALF 0
+#define BUF_TBL_MODE_FULL 1
+
+/* SRAM receive descriptor cache configuration register */
+#define SRM_RX_DC_CFG_REG_KER 0x610
+#define SRM_RX_DC_BASE_ADR_LBN 0
+#define SRM_RX_DC_BASE_ADR_WIDTH 21
+
+/* SRAM transmit descriptor cache configuration register */
+#define SRM_TX_DC_CFG_REG_KER 0x620
+#define SRM_TX_DC_BASE_ADR_LBN 0
+#define SRM_TX_DC_BASE_ADR_WIDTH 21
+
+/* SRAM configuration register */
+#define SRM_CFG_REG_KER 0x630
+#define SRAM_OOB_BT_INIT_EN_LBN 3
+#define SRAM_OOB_BT_INIT_EN_WIDTH 1
+#define SRM_NUM_BANKS_AND_BANK_SIZE_LBN 0
+#define SRM_NUM_BANKS_AND_BANK_SIZE_WIDTH 3
+#define SRM_NB_BSZ_1BANKS_2M 0
+#define SRM_NB_BSZ_1BANKS_4M 1
+#define SRM_NB_BSZ_1BANKS_8M 2
+#define SRM_NB_BSZ_DEFAULT 3 /* char driver will set the default */
+#define SRM_NB_BSZ_2BANKS_4M 4
+#define SRM_NB_BSZ_2BANKS_8M 5
+#define SRM_NB_BSZ_2BANKS_16M 6
+#define SRM_NB_BSZ_RESERVED 7
+
+/* Special buffer table update register */
+#define BUF_TBL_UPD_REG_KER 0x0650
+#define BUF_UPD_CMD_LBN 63
+#define BUF_UPD_CMD_WIDTH 1
+#define BUF_CLR_CMD_LBN 62
+#define BUF_CLR_CMD_WIDTH 1
+#define BUF_CLR_END_ID_LBN 32
+#define BUF_CLR_END_ID_WIDTH 20
+#define BUF_CLR_START_ID_LBN 0
+#define BUF_CLR_START_ID_WIDTH 20
+
+/* Receive configuration register */
+#define RX_CFG_REG_KER 0x800
+
+/* B0 */
+#define RX_INGR_EN_B0_LBN 47
+#define RX_INGR_EN_B0_WIDTH 1
+#define RX_DESC_PUSH_EN_B0_LBN 43
+#define RX_DESC_PUSH_EN_B0_WIDTH 1
+#define RX_XON_TX_TH_B0_LBN 33
+#define RX_XON_TX_TH_B0_WIDTH 5
+#define RX_XOFF_TX_TH_B0_LBN 28
+#define RX_XOFF_TX_TH_B0_WIDTH 5
+#define RX_USR_BUF_SIZE_B0_LBN 19
+#define RX_USR_BUF_SIZE_B0_WIDTH 9
+#define RX_XON_MAC_TH_B0_LBN 10
+#define RX_XON_MAC_TH_B0_WIDTH 9
+#define RX_XOFF_MAC_TH_B0_LBN 1
+#define RX_XOFF_MAC_TH_B0_WIDTH 9
+#define RX_XOFF_MAC_EN_B0_LBN 0
+#define RX_XOFF_MAC_EN_B0_WIDTH 1
+
+/* A1 */
+#define RX_DESC_PUSH_EN_A1_LBN 35
+#define RX_DESC_PUSH_EN_A1_WIDTH 1
+#define RX_XON_TX_TH_A1_LBN 25
+#define RX_XON_TX_TH_A1_WIDTH 5
+#define RX_XOFF_TX_TH_A1_LBN 20
+#define RX_XOFF_TX_TH_A1_WIDTH 5
+#define RX_USR_BUF_SIZE_A1_LBN 11
+#define RX_USR_BUF_SIZE_A1_WIDTH 9
+#define RX_XON_MAC_TH_A1_LBN 6
+#define RX_XON_MAC_TH_A1_WIDTH 5
+#define RX_XOFF_MAC_TH_A1_LBN 1
+#define RX_XOFF_MAC_TH_A1_WIDTH 5
+#define RX_XOFF_MAC_EN_A1_LBN 0
+#define RX_XOFF_MAC_EN_A1_WIDTH 1
+
+/* Receive filter control register */
+#define RX_FILTER_CTL_REG 0x810
+#define UDP_FULL_SRCH_LIMIT_LBN 32
+#define UDP_FULL_SRCH_LIMIT_WIDTH 8
+#define NUM_KER_LBN 24
+#define NUM_KER_WIDTH 2
+#define UDP_WILD_SRCH_LIMIT_LBN 16
+#define UDP_WILD_SRCH_LIMIT_WIDTH 8
+#define TCP_WILD_SRCH_LIMIT_LBN 8
+#define TCP_WILD_SRCH_LIMIT_WIDTH 8
+#define TCP_FULL_SRCH_LIMIT_LBN 0
+#define TCP_FULL_SRCH_LIMIT_WIDTH 8
+
+/* RX queue flush register */
+#define RX_FLUSH_DESCQ_REG_KER 0x0820
+#define RX_FLUSH_DESCQ_CMD_LBN 24
+#define RX_FLUSH_DESCQ_CMD_WIDTH 1
+#define RX_FLUSH_DESCQ_LBN 0
+#define RX_FLUSH_DESCQ_WIDTH 12
+
+/* Receive descriptor update register */
+#define RX_DESC_UPD_REG_KER_DWORD (0x830 + 12)
+#define RX_DESC_WPTR_DWORD_LBN 0
+#define RX_DESC_WPTR_DWORD_WIDTH 12
+
+/* Receive descriptor cache configuration register */
+#define RX_DC_CFG_REG_KER 0x840
+#define RX_DC_SIZE_LBN 0
+#define RX_DC_SIZE_WIDTH 2
+
+#define RX_DC_PF_WM_REG_KER 0x850
+#define RX_DC_PF_LWM_LBN 0
+#define RX_DC_PF_LWM_WIDTH 6
+
+/* RX no descriptor drop counter */
+#define RX_NODESC_DROP_REG_KER 0x880
+#define RX_NODESC_DROP_CNT_LBN 0
+#define RX_NODESC_DROP_CNT_WIDTH 16
+
+/* RX black magic register */
+#define RX_SELF_RST_REG_KER 0x890
+#define RX_ISCSI_DIS_LBN 17
+#define RX_ISCSI_DIS_WIDTH 1
+#define RX_NODESC_WAIT_DIS_LBN 9
+#define RX_NODESC_WAIT_DIS_WIDTH 1
+#define RX_RECOVERY_EN_LBN 8
+#define RX_RECOVERY_EN_WIDTH 1
+
+/* TX queue flush register */
+#define TX_FLUSH_DESCQ_REG_KER 0x0a00
+#define TX_FLUSH_DESCQ_CMD_LBN 12
+#define TX_FLUSH_DESCQ_CMD_WIDTH 1
+#define TX_FLUSH_DESCQ_LBN 0
+#define TX_FLUSH_DESCQ_WIDTH 12
+
+/* Transmit descriptor update register */
+#define TX_DESC_UPD_REG_KER_DWORD (0xa10 + 12)
+#define TX_DESC_WPTR_DWORD_LBN 0
+#define TX_DESC_WPTR_DWORD_WIDTH 12
+
+/* Transmit descriptor cache configuration register */
+#define TX_DC_CFG_REG_KER 0xa20
+#define TX_DC_SIZE_LBN 0
+#define TX_DC_SIZE_WIDTH 2
+
+/* Transmit checksum configuration register (A0/A1 only) */
+#define TX_CHKSM_CFG_REG_KER_A1 0xa30
+
+/* Transmit configuration register */
+#define TX_CFG_REG_KER 0xa50
+#define TX_NO_EOP_DISC_EN_LBN 5
+#define TX_NO_EOP_DISC_EN_WIDTH 1
+
+/* Transmit configuration register 2 */
+#define TX_CFG2_REG_KER 0xa80
+#define TX_CSR_PUSH_EN_LBN 89
+#define TX_CSR_PUSH_EN_WIDTH 1
+#define TX_RX_SPACER_LBN 64
+#define TX_RX_SPACER_WIDTH 8
+#define TX_SW_EV_EN_LBN 59
+#define TX_SW_EV_EN_WIDTH 1
+#define TX_RX_SPACER_EN_LBN 57
+#define TX_RX_SPACER_EN_WIDTH 1
+#define TX_PREF_THRESHOLD_LBN 19
+#define TX_PREF_THRESHOLD_WIDTH 2
+#define TX_ONE_PKT_PER_Q_LBN 18
+#define TX_ONE_PKT_PER_Q_WIDTH 1
+#define TX_DIS_NON_IP_EV_LBN 17
+#define TX_DIS_NON_IP_EV_WIDTH 1
+#define TX_FLUSH_MIN_LEN_EN_B0_LBN 7
+#define TX_FLUSH_MIN_LEN_EN_B0_WIDTH 1
+
+/* PHY management transmit data register */
+#define MD_TXD_REG_KER 0xc00
+#define MD_TXD_LBN 0
+#define MD_TXD_WIDTH 16
+
+/* PHY management receive data register */
+#define MD_RXD_REG_KER 0xc10
+#define MD_RXD_LBN 0
+#define MD_RXD_WIDTH 16
+
+/* PHY management configuration & status register */
+#define MD_CS_REG_KER 0xc20
+#define MD_GC_LBN 4
+#define MD_GC_WIDTH 1
+#define MD_RIC_LBN 2
+#define MD_RIC_WIDTH 1
+#define MD_RDC_LBN 1
+#define MD_RDC_WIDTH 1
+#define MD_WRC_LBN 0
+#define MD_WRC_WIDTH 1
+
+/* PHY management PHY address register */
+#define MD_PHY_ADR_REG_KER 0xc30
+#define MD_PHY_ADR_LBN 0
+#define MD_PHY_ADR_WIDTH 16
+
+/* PHY management ID register */
+#define MD_ID_REG_KER 0xc40
+#define MD_PRT_ADR_LBN 11
+#define MD_PRT_ADR_WIDTH 5
+#define MD_DEV_ADR_LBN 6
+#define MD_DEV_ADR_WIDTH 5
+/* Used for writing both at once */
+#define MD_PRT_DEV_ADR_LBN 6
+#define MD_PRT_DEV_ADR_WIDTH 10
+
+/* PHY management status & mask register (DWORD read only) */
+#define MD_STAT_REG_KER 0xc50
+#define MD_BSERR_LBN 2
+#define MD_BSERR_WIDTH 1
+#define MD_LNFL_LBN 1
+#define MD_LNFL_WIDTH 1
+#define MD_BSY_LBN 0
+#define MD_BSY_WIDTH 1
+
+/* Port 0 and 1 MAC stats registers */
+#define MAC0_STAT_DMA_REG_KER 0xc60
+#define MAC_STAT_DMA_CMD_LBN 48
+#define MAC_STAT_DMA_CMD_WIDTH 1
+#define MAC_STAT_DMA_ADR_LBN 0
+#define MAC_STAT_DMA_ADR_WIDTH EFX_DMA_TYPE_WIDTH(46)
+
+/* Port 0 and 1 MAC control registers */
+#define MAC0_CTRL_REG_KER 0xc80
+#define MAC_XOFF_VAL_LBN 16
+#define MAC_XOFF_VAL_WIDTH 16
+#define TXFIFO_DRAIN_EN_B0_LBN 7
+#define TXFIFO_DRAIN_EN_B0_WIDTH 1
+#define MAC_BCAD_ACPT_LBN 4
+#define MAC_BCAD_ACPT_WIDTH 1
+#define MAC_UC_PROM_LBN 3
+#define MAC_UC_PROM_WIDTH 1
+#define MAC_LINK_STATUS_LBN 2
+#define MAC_LINK_STATUS_WIDTH 1
+#define MAC_SPEED_LBN 0
+#define MAC_SPEED_WIDTH 2
+
+/* 10G XAUI XGXS default values */
+#define XX_TXDRV_DEQ_DEFAULT 0xe /* deq=.6 */
+#define XX_TXDRV_DTX_DEFAULT 0x5 /* 1.25 */
+#define XX_SD_CTL_DRV_DEFAULT 0  /* 20mA */
+
+/* Multicast address hash table */
+#define MAC_MCAST_HASH_REG0_KER 0xca0
+#define MAC_MCAST_HASH_REG1_KER 0xcb0
+
+/* GMAC registers */
+#define FALCON_GMAC_REGBANK 0xe00
+#define FALCON_GMAC_REGBANK_SIZE 0x200
+#define FALCON_GMAC_REG_SIZE 0x10
+
+/* XMAC registers */
+#define FALCON_XMAC_REGBANK 0x1200
+#define FALCON_XMAC_REGBANK_SIZE 0x200
+#define FALCON_XMAC_REG_SIZE 0x10
+
+/* XGMAC address register low */
+#define XM_ADR_LO_REG_MAC 0x00
+#define XM_ADR_3_LBN 24
+#define XM_ADR_3_WIDTH 8
+#define XM_ADR_2_LBN 16
+#define XM_ADR_2_WIDTH 8
+#define XM_ADR_1_LBN 8
+#define XM_ADR_1_WIDTH 8
+#define XM_ADR_0_LBN 0
+#define XM_ADR_0_WIDTH 8
+
+/* XGMAC address register high */
+#define XM_ADR_HI_REG_MAC 0x01
+#define XM_ADR_5_LBN 8
+#define XM_ADR_5_WIDTH 8
+#define XM_ADR_4_LBN 0
+#define XM_ADR_4_WIDTH 8
+
+/* XGMAC global configuration */
+#define XM_GLB_CFG_REG_MAC 0x02
+#define XM_RX_STAT_EN_LBN 11
+#define XM_RX_STAT_EN_WIDTH 1
+#define XM_TX_STAT_EN_LBN 10
+#define XM_TX_STAT_EN_WIDTH 1
+#define XM_RX_JUMBO_MODE_LBN 6
+#define XM_RX_JUMBO_MODE_WIDTH 1
+#define XM_INTCLR_MODE_LBN 3
+#define XM_INTCLR_MODE_WIDTH 1
+#define XM_CORE_RST_LBN 0
+#define XM_CORE_RST_WIDTH 1
+
+/* XGMAC transmit configuration */
+#define XM_TX_CFG_REG_MAC 0x03
+#define XM_IPG_LBN 16
+#define XM_IPG_WIDTH 4
+#define XM_FCNTL_LBN 10
+#define XM_FCNTL_WIDTH 1
+#define XM_TXCRC_LBN 8
+#define XM_TXCRC_WIDTH 1
+#define XM_AUTO_PAD_LBN 5
+#define XM_AUTO_PAD_WIDTH 1
+#define XM_TX_PRMBL_LBN 2
+#define XM_TX_PRMBL_WIDTH 1
+#define XM_TXEN_LBN 1
+#define XM_TXEN_WIDTH 1
+
+/* XGMAC receive configuration */
+#define XM_RX_CFG_REG_MAC 0x04
+#define XM_PASS_CRC_ERR_LBN 25
+#define XM_PASS_CRC_ERR_WIDTH 1
+#define XM_ACPT_ALL_MCAST_LBN 11
+#define XM_ACPT_ALL_MCAST_WIDTH 1
+#define XM_ACPT_ALL_UCAST_LBN 9
+#define XM_ACPT_ALL_UCAST_WIDTH 1
+#define XM_AUTO_DEPAD_LBN 8
+#define XM_AUTO_DEPAD_WIDTH 1
+#define XM_RXEN_LBN 1
+#define XM_RXEN_WIDTH 1
+
+/* XGMAC management interrupt mask register */
+#define XM_MGT_INT_MSK_REG_MAC_B0 0x5
+#define XM_MSK_PRMBLE_ERR_LBN 2
+#define XM_MSK_PRMBLE_ERR_WIDTH 1
+#define XM_MSK_RMTFLT_LBN 1
+#define XM_MSK_RMTFLT_WIDTH 1
+#define XM_MSK_LCLFLT_LBN 0
+#define XM_MSK_LCLFLT_WIDTH 1
+
+/* XGMAC flow control register */
+#define XM_FC_REG_MAC 0x7
+#define XM_PAUSE_TIME_LBN 16
+#define XM_PAUSE_TIME_WIDTH 16
+#define XM_DIS_FCNTL_LBN 0
+#define XM_DIS_FCNTL_WIDTH 1
+
+/* XGMAC pause time count register */
+#define XM_PAUSE_TIME_REG_MAC 0x9
+
+/* XGMAC transmit parameter register */
+#define XM_TX_PARAM_REG_MAC 0x0d
+#define XM_TX_JUMBO_MODE_LBN 31
+#define XM_TX_JUMBO_MODE_WIDTH 1
+#define XM_MAX_TX_FRM_SIZE_LBN 16
+#define XM_MAX_TX_FRM_SIZE_WIDTH 14
+
+/* XGMAC receive parameter register */
+#define XM_RX_PARAM_REG_MAC 0x0e
+#define XM_MAX_RX_FRM_SIZE_LBN 0
+#define XM_MAX_RX_FRM_SIZE_WIDTH 14
+
+/* XGMAC management interrupt status register */
+#define XM_MGT_INT_REG_MAC_B0 0x0f
+#define XM_PRMBLE_ERR 2
+#define XM_PRMBLE_WIDTH 1
+#define XM_RMTFLT_LBN 1
+#define XM_RMTFLT_WIDTH 1
+#define XM_LCLFLT_LBN 0
+#define XM_LCLFLT_WIDTH 1
+
+/* XGXS/XAUI powerdown/reset register */
+#define XX_PWR_RST_REG_MAC 0x10
+
+#define XX_PWRDND_EN_LBN 15
+#define XX_PWRDND_EN_WIDTH 1
+#define XX_PWRDNC_EN_LBN 14
+#define XX_PWRDNC_EN_WIDTH 1
+#define XX_PWRDNB_EN_LBN 13
+#define XX_PWRDNB_EN_WIDTH 1
+#define XX_PWRDNA_EN_LBN 12
+#define XX_PWRDNA_EN_WIDTH 1
+#define XX_RSTPLLCD_EN_LBN 9
+#define XX_RSTPLLCD_EN_WIDTH 1
+#define XX_RSTPLLAB_EN_LBN 8
+#define XX_RSTPLLAB_EN_WIDTH 1
+#define XX_RESETD_EN_LBN 7
+#define XX_RESETD_EN_WIDTH 1
+#define XX_RESETC_EN_LBN 6
+#define XX_RESETC_EN_WIDTH 1
+#define XX_RESETB_EN_LBN 5
+#define XX_RESETB_EN_WIDTH 1
+#define XX_RESETA_EN_LBN 4
+#define XX_RESETA_EN_WIDTH 1
+#define XX_RSTXGXSRX_EN_LBN 2
+#define XX_RSTXGXSRX_EN_WIDTH 1
+#define XX_RSTXGXSTX_EN_LBN 1
+#define XX_RSTXGXSTX_EN_WIDTH 1
+#define XX_RST_XX_EN_LBN 0
+#define XX_RST_XX_EN_WIDTH 1
+
+/* XGXS/XAUI powerdown/reset control register */
+#define XX_SD_CTL_REG_MAC 0x11
+#define XX_HIDRVD_LBN 15
+#define XX_HIDRVD_WIDTH 1
+#define XX_LODRVD_LBN 14
+#define XX_LODRVD_WIDTH 1
+#define XX_HIDRVC_LBN 13
+#define XX_HIDRVC_WIDTH 1
+#define XX_LODRVC_LBN 12
+#define XX_LODRVC_WIDTH 1
+#define XX_HIDRVB_LBN 11
+#define XX_HIDRVB_WIDTH 1
+#define XX_LODRVB_LBN 10
+#define XX_LODRVB_WIDTH 1
+#define XX_HIDRVA_LBN 9
+#define XX_HIDRVA_WIDTH 1
+#define XX_LODRVA_LBN 8
+#define XX_LODRVA_WIDTH 1
+
+#define XX_TXDRV_CTL_REG_MAC 0x12
+#define XX_DEQD_LBN 28
+#define XX_DEQD_WIDTH 4
+#define XX_DEQC_LBN 24
+#define XX_DEQC_WIDTH 4
+#define XX_DEQB_LBN 20
+#define XX_DEQB_WIDTH 4
+#define XX_DEQA_LBN 16
+#define XX_DEQA_WIDTH 4
+#define XX_DTXD_LBN 12
+#define XX_DTXD_WIDTH 4
+#define XX_DTXC_LBN 8
+#define XX_DTXC_WIDTH 4
+#define XX_DTXB_LBN 4
+#define XX_DTXB_WIDTH 4
+#define XX_DTXA_LBN 0
+#define XX_DTXA_WIDTH 4
+
+/* XAUI XGXS core status register */
+#define XX_FORCE_SIG_DECODE_FORCED 0xff
+#define XX_CORE_STAT_REG_MAC 0x16
+#define XX_ALIGN_DONE_LBN 20
+#define XX_ALIGN_DONE_WIDTH 1
+#define XX_SYNC_STAT_LBN 16
+#define XX_SYNC_STAT_WIDTH 4
+#define XX_SYNC_STAT_DECODE_SYNCED 0xf
+#define XX_COMMA_DET_LBN 12
+#define XX_COMMA_DET_WIDTH 4
+#define XX_COMMA_DET_DECODE_DETECTED 0xf
+#define XX_COMMA_DET_RESET 0xf
+#define XX_CHARERR_LBN 4
+#define XX_CHARERR_WIDTH 4
+#define XX_CHARERR_RESET 0xf
+#define XX_DISPERR_LBN 0
+#define XX_DISPERR_WIDTH 4
+#define XX_DISPERR_RESET 0xf
+
+/* Receive filter table */
+#define RX_FILTER_TBL0 0xF00000
+
+/* Receive descriptor pointer table */
+#define RX_DESC_PTR_TBL_KER_A1 0x11800
+#define RX_DESC_PTR_TBL_KER_B0 0xF40000
+#define RX_DESC_PTR_TBL_KER_P0 0x900
+#define RX_ISCSI_DDIG_EN_LBN 88
+#define RX_ISCSI_DDIG_EN_WIDTH 1
+#define RX_ISCSI_HDIG_EN_LBN 87
+#define RX_ISCSI_HDIG_EN_WIDTH 1
+#define RX_DESCQ_BUF_BASE_ID_LBN 36
+#define RX_DESCQ_BUF_BASE_ID_WIDTH 20
+#define RX_DESCQ_EVQ_ID_LBN 24
+#define RX_DESCQ_EVQ_ID_WIDTH 12
+#define RX_DESCQ_OWNER_ID_LBN 10
+#define RX_DESCQ_OWNER_ID_WIDTH 14
+#define RX_DESCQ_LABEL_LBN 5
+#define RX_DESCQ_LABEL_WIDTH 5
+#define RX_DESCQ_SIZE_LBN 3
+#define RX_DESCQ_SIZE_WIDTH 2
+#define RX_DESCQ_SIZE_4K 3
+#define RX_DESCQ_SIZE_2K 2
+#define RX_DESCQ_SIZE_1K 1
+#define RX_DESCQ_SIZE_512 0
+#define RX_DESCQ_TYPE_LBN 2
+#define RX_DESCQ_TYPE_WIDTH 1
+#define RX_DESCQ_JUMBO_LBN 1
+#define RX_DESCQ_JUMBO_WIDTH 1
+#define RX_DESCQ_EN_LBN 0
+#define RX_DESCQ_EN_WIDTH 1
+
+/* Transmit descriptor pointer table */
+#define TX_DESC_PTR_TBL_KER_A1 0x11900
+#define TX_DESC_PTR_TBL_KER_B0 0xF50000
+#define TX_DESC_PTR_TBL_KER_P0 0xa40
+#define TX_NON_IP_DROP_DIS_B0_LBN 91
+#define TX_NON_IP_DROP_DIS_B0_WIDTH 1
+#define TX_IP_CHKSM_DIS_B0_LBN 90
+#define TX_IP_CHKSM_DIS_B0_WIDTH 1
+#define TX_TCP_CHKSM_DIS_B0_LBN 89
+#define TX_TCP_CHKSM_DIS_B0_WIDTH 1
+#define TX_DESCQ_EN_LBN 88
+#define TX_DESCQ_EN_WIDTH 1
+#define TX_ISCSI_DDIG_EN_LBN 87
+#define TX_ISCSI_DDIG_EN_WIDTH 1
+#define TX_ISCSI_HDIG_EN_LBN 86
+#define TX_ISCSI_HDIG_EN_WIDTH 1
+#define TX_DESCQ_BUF_BASE_ID_LBN 36
+#define TX_DESCQ_BUF_BASE_ID_WIDTH 20
+#define TX_DESCQ_EVQ_ID_LBN 24
+#define TX_DESCQ_EVQ_ID_WIDTH 12
+#define TX_DESCQ_OWNER_ID_LBN 10
+#define TX_DESCQ_OWNER_ID_WIDTH 14
+#define TX_DESCQ_LABEL_LBN 5
+#define TX_DESCQ_LABEL_WIDTH 5
+#define TX_DESCQ_SIZE_LBN 3
+#define TX_DESCQ_SIZE_WIDTH 2
+#define TX_DESCQ_SIZE_4K 3
+#define TX_DESCQ_SIZE_2K 2
+#define TX_DESCQ_SIZE_1K 1
+#define TX_DESCQ_SIZE_512 0
+#define TX_DESCQ_TYPE_LBN 1
+#define TX_DESCQ_TYPE_WIDTH 2
+
+/* Event queue pointer */
+#define EVQ_PTR_TBL_KER_A1 0x11a00
+#define EVQ_PTR_TBL_KER_B0 0xf60000
+#define EVQ_PTR_TBL_KER_P0 0x500
+#define EVQ_EN_LBN 23
+#define EVQ_EN_WIDTH 1
+#define EVQ_SIZE_LBN 20
+#define EVQ_SIZE_WIDTH 3
+#define EVQ_SIZE_32K 6
+#define EVQ_SIZE_16K 5
+#define EVQ_SIZE_8K 4
+#define EVQ_SIZE_4K 3
+#define EVQ_SIZE_2K 2
+#define EVQ_SIZE_1K 1
+#define EVQ_SIZE_512 0
+#define EVQ_BUF_BASE_ID_LBN 0
+#define EVQ_BUF_BASE_ID_WIDTH 20
+
+/* Event queue read pointer */
+#define EVQ_RPTR_REG_KER_A1 0x11b00
+#define EVQ_RPTR_REG_KER_B0 0xfa0000
+#define EVQ_RPTR_REG_KER_DWORD (EVQ_RPTR_REG_KER + 0)
+#define EVQ_RPTR_DWORD_LBN 0
+#define EVQ_RPTR_DWORD_WIDTH 14
+
+/* RSS indirection table */
+#define RX_RSS_INDIR_TBL_B0 0xFB0000
+#define RX_RSS_INDIR_ENT_B0_LBN 0
+#define RX_RSS_INDIR_ENT_B0_WIDTH 6
+
+/* Special buffer descriptors (full-mode) */
+#define BUF_FULL_TBL_KER_A1 0x8000
+#define BUF_FULL_TBL_KER_B0 0x800000
+#define IP_DAT_BUF_SIZE_LBN 50
+#define IP_DAT_BUF_SIZE_WIDTH 1
+#define IP_DAT_BUF_SIZE_8K 1
+#define IP_DAT_BUF_SIZE_4K 0
+#define BUF_ADR_REGION_LBN 48
+#define BUF_ADR_REGION_WIDTH 2
+#define BUF_ADR_FBUF_LBN 14
+#define BUF_ADR_FBUF_WIDTH 34
+#define BUF_OWNER_ID_FBUF_LBN 0
+#define BUF_OWNER_ID_FBUF_WIDTH 14
+
+/* Transmit descriptor */
+#define TX_KER_PORT_LBN 63
+#define TX_KER_PORT_WIDTH 1
+#define TX_KER_CONT_LBN 62
+#define TX_KER_CONT_WIDTH 1
+#define TX_KER_BYTE_CNT_LBN 48
+#define TX_KER_BYTE_CNT_WIDTH 14
+#define TX_KER_BUF_REGION_LBN 46
+#define TX_KER_BUF_REGION_WIDTH 2
+#define TX_KER_BUF_REGION0_DECODE 0
+#define TX_KER_BUF_REGION1_DECODE 1
+#define TX_KER_BUF_REGION2_DECODE 2
+#define TX_KER_BUF_REGION3_DECODE 3
+#define TX_KER_BUF_ADR_LBN 0
+#define TX_KER_BUF_ADR_WIDTH EFX_DMA_TYPE_WIDTH(46)
+
+/* Receive descriptor */
+#define RX_KER_BUF_SIZE_LBN 48
+#define RX_KER_BUF_SIZE_WIDTH 14
+#define RX_KER_BUF_REGION_LBN 46
+#define RX_KER_BUF_REGION_WIDTH 2
+#define RX_KER_BUF_REGION0_DECODE 0
+#define RX_KER_BUF_REGION1_DECODE 1
+#define RX_KER_BUF_REGION2_DECODE 2
+#define RX_KER_BUF_REGION3_DECODE 3
+#define RX_KER_BUF_ADR_LBN 0
+#define RX_KER_BUF_ADR_WIDTH EFX_DMA_TYPE_WIDTH(46)
+
+/**************************************************************************
+ *
+ * Falcon events
+ *
+ **************************************************************************
+ */
+
+/* Event queue entries */
+#define EV_CODE_LBN 60
+#define EV_CODE_WIDTH 4
+#define RX_IP_EV_DECODE 0
+#define TX_IP_EV_DECODE 2
+#define DRIVER_EV_DECODE 5
+#define GLOBAL_EV_DECODE 6
+#define DRV_GEN_EV_DECODE 7
+#define WHOLE_EVENT_LBN 0
+#define WHOLE_EVENT_WIDTH 64
+
+/* Receive events */
+#define RX_EV_PKT_OK_LBN 56
+#define RX_EV_PKT_OK_WIDTH 1
+#define RX_EV_PAUSE_FRM_ERR_LBN 55
+#define RX_EV_PAUSE_FRM_ERR_WIDTH 1
+#define RX_EV_BUF_OWNER_ID_ERR_LBN 54
+#define RX_EV_BUF_OWNER_ID_ERR_WIDTH 1
+#define RX_EV_IF_FRAG_ERR_LBN 53
+#define RX_EV_IF_FRAG_ERR_WIDTH 1
+#define RX_EV_IP_HDR_CHKSUM_ERR_LBN 52
+#define RX_EV_IP_HDR_CHKSUM_ERR_WIDTH 1
+#define RX_EV_TCP_UDP_CHKSUM_ERR_LBN 51
+#define RX_EV_TCP_UDP_CHKSUM_ERR_WIDTH 1
+#define RX_EV_ETH_CRC_ERR_LBN 50
+#define RX_EV_ETH_CRC_ERR_WIDTH 1
+#define RX_EV_FRM_TRUNC_LBN 49
+#define RX_EV_FRM_TRUNC_WIDTH 1
+#define RX_EV_DRIB_NIB_LBN 48
+#define RX_EV_DRIB_NIB_WIDTH 1
+#define RX_EV_TOBE_DISC_LBN 47
+#define RX_EV_TOBE_DISC_WIDTH 1
+#define RX_EV_PKT_TYPE_LBN 44
+#define RX_EV_PKT_TYPE_WIDTH 3
+#define RX_EV_PKT_TYPE_ETH_DECODE 0
+#define RX_EV_PKT_TYPE_LLC_DECODE 1
+#define RX_EV_PKT_TYPE_JUMBO_DECODE 2
+#define RX_EV_PKT_TYPE_VLAN_DECODE 3
+#define RX_EV_PKT_TYPE_VLAN_LLC_DECODE 4
+#define RX_EV_PKT_TYPE_VLAN_JUMBO_DECODE 5
+#define RX_EV_HDR_TYPE_LBN 42
+#define RX_EV_HDR_TYPE_WIDTH 2
+#define RX_EV_HDR_TYPE_TCP_IPV4_DECODE 0
+#define RX_EV_HDR_TYPE_UDP_IPV4_DECODE 1
+#define RX_EV_HDR_TYPE_OTHER_IP_DECODE 2
+#define RX_EV_HDR_TYPE_NON_IP_DECODE 3
+#define RX_EV_HDR_TYPE_HAS_CHECKSUMS(hdr_type) \
+	((hdr_type) <= RX_EV_HDR_TYPE_UDP_IPV4_DECODE)
+#define RX_EV_MCAST_HASH_MATCH_LBN 40
+#define RX_EV_MCAST_HASH_MATCH_WIDTH 1
+#define RX_EV_MCAST_PKT_LBN 39
+#define RX_EV_MCAST_PKT_WIDTH 1
+#define RX_EV_Q_LABEL_LBN 32
+#define RX_EV_Q_LABEL_WIDTH 5
+#define RX_EV_JUMBO_CONT_LBN 31
+#define RX_EV_JUMBO_CONT_WIDTH 1
+#define RX_EV_BYTE_CNT_LBN 16
+#define RX_EV_BYTE_CNT_WIDTH 14
+#define RX_EV_SOP_LBN 15
+#define RX_EV_SOP_WIDTH 1
+#define RX_EV_DESC_PTR_LBN 0
+#define RX_EV_DESC_PTR_WIDTH 12
+
+/* Transmit events */
+#define TX_EV_PKT_ERR_LBN 38
+#define TX_EV_PKT_ERR_WIDTH 1
+#define TX_EV_Q_LABEL_LBN 32
+#define TX_EV_Q_LABEL_WIDTH 5
+#define TX_EV_WQ_FF_FULL_LBN 15
+#define TX_EV_WQ_FF_FULL_WIDTH 1
+#define TX_EV_COMP_LBN 12
+#define TX_EV_COMP_WIDTH 1
+#define TX_EV_DESC_PTR_LBN 0
+#define TX_EV_DESC_PTR_WIDTH 12
+
+/* Driver events */
+#define DRIVER_EV_SUB_CODE_LBN 56
+#define DRIVER_EV_SUB_CODE_WIDTH 4
+#define DRIVER_EV_SUB_DATA_LBN 0
+#define DRIVER_EV_SUB_DATA_WIDTH 14
+#define TX_DESCQ_FLS_DONE_EV_DECODE 0
+#define RX_DESCQ_FLS_DONE_EV_DECODE 1
+#define EVQ_INIT_DONE_EV_DECODE 2
+#define EVQ_NOT_EN_EV_DECODE 3
+#define RX_DESCQ_FLSFF_OVFL_EV_DECODE 4
+#define SRM_UPD_DONE_EV_DECODE 5
+#define WAKE_UP_EV_DECODE 6
+#define TX_PKT_NON_TCP_UDP_DECODE 9
+#define TIMER_EV_DECODE 10
+#define RX_RECOVERY_EV_DECODE 11
+#define RX_DSC_ERROR_EV_DECODE 14
+#define TX_DSC_ERROR_EV_DECODE 15
+#define DRIVER_EV_TX_DESCQ_ID_LBN 0
+#define DRIVER_EV_TX_DESCQ_ID_WIDTH 12
+#define DRIVER_EV_RX_FLUSH_FAIL_LBN 12
+#define DRIVER_EV_RX_FLUSH_FAIL_WIDTH 1
+#define DRIVER_EV_RX_DESCQ_ID_LBN 0
+#define DRIVER_EV_RX_DESCQ_ID_WIDTH 12
+#define SRM_CLR_EV_DECODE 0
+#define SRM_UPD_EV_DECODE 1
+#define SRM_ILLCLR_EV_DECODE 2
+
+/* Global events */
+#define RX_RECOVERY_B0_LBN 12
+#define RX_RECOVERY_B0_WIDTH 1
+#define XG_MNT_INTR_B0_LBN 11
+#define XG_MNT_INTR_B0_WIDTH 1
+#define RX_RECOVERY_A1_LBN 11
+#define RX_RECOVERY_A1_WIDTH 1
+#define XG_PHY_INTR_LBN 9
+#define XG_PHY_INTR_WIDTH 1
+#define G_PHY1_INTR_LBN 8
+#define G_PHY1_INTR_WIDTH 1
+#define G_PHY0_INTR_LBN 7
+#define G_PHY0_INTR_WIDTH 1
+
+/* Driver-generated test events */
+#define EVQ_MAGIC_LBN 0
+#define EVQ_MAGIC_WIDTH 32
+
+/**************************************************************************
+ *
+ * Falcon MAC stats
+ *
+ **************************************************************************
+ *
+ */
+#define GRxGoodOct_offset 0x0
+#define GRxBadOct_offset 0x8
+#define GRxMissPkt_offset 0x10
+#define GRxFalseCRS_offset 0x14
+#define GRxPausePkt_offset 0x18
+#define GRxBadPkt_offset 0x1C
+#define GRxUcastPkt_offset 0x20
+#define GRxMcastPkt_offset 0x24
+#define GRxBcastPkt_offset 0x28
+#define GRxGoodLt64Pkt_offset 0x2C
+#define GRxBadLt64Pkt_offset 0x30
+#define GRx64Pkt_offset 0x34
+#define GRx65to127Pkt_offset 0x38
+#define GRx128to255Pkt_offset 0x3C
+#define GRx256to511Pkt_offset 0x40
+#define GRx512to1023Pkt_offset 0x44
+#define GRx1024to15xxPkt_offset 0x48
+#define GRx15xxtoJumboPkt_offset 0x4C
+#define GRxGtJumboPkt_offset 0x50
+#define GRxFcsErr64to15xxPkt_offset 0x54
+#define GRxFcsErr15xxtoJumboPkt_offset 0x58
+#define GRxFcsErrGtJumboPkt_offset 0x5C
+#define GTxGoodBadOct_offset 0x80
+#define GTxGoodOct_offset 0x88
+#define GTxSglColPkt_offset 0x90
+#define GTxMultColPkt_offset 0x94
+#define GTxExColPkt_offset 0x98
+#define GTxDefPkt_offset 0x9C
+#define GTxLateCol_offset 0xA0
+#define GTxExDefPkt_offset 0xA4
+#define GTxPausePkt_offset 0xA8
+#define GTxBadPkt_offset 0xAC
+#define GTxUcastPkt_offset 0xB0
+#define GTxMcastPkt_offset 0xB4
+#define GTxBcastPkt_offset 0xB8
+#define GTxLt64Pkt_offset 0xBC
+#define GTx64Pkt_offset 0xC0
+#define GTx65to127Pkt_offset 0xC4
+#define GTx128to255Pkt_offset 0xC8
+#define GTx256to511Pkt_offset 0xCC
+#define GTx512to1023Pkt_offset 0xD0
+#define GTx1024to15xxPkt_offset 0xD4
+#define GTx15xxtoJumboPkt_offset 0xD8
+#define GTxGtJumboPkt_offset 0xDC
+#define GTxNonTcpUdpPkt_offset 0xE0
+#define GTxMacSrcErrPkt_offset 0xE4
+#define GTxIpSrcErrPkt_offset 0xE8
+#define GDmaDone_offset 0xEC
+
+#define XgRxOctets_offset 0x0
+#define XgRxOctets_WIDTH 48
+#define XgRxOctetsOK_offset 0x8
+#define XgRxOctetsOK_WIDTH 48
+#define XgRxPkts_offset 0x10
+#define XgRxPkts_WIDTH 32
+#define XgRxPktsOK_offset 0x14
+#define XgRxPktsOK_WIDTH 32
+#define XgRxBroadcastPkts_offset 0x18
+#define XgRxBroadcastPkts_WIDTH 32
+#define XgRxMulticastPkts_offset 0x1C
+#define XgRxMulticastPkts_WIDTH 32
+#define XgRxUnicastPkts_offset 0x20
+#define XgRxUnicastPkts_WIDTH 32
+#define XgRxUndersizePkts_offset 0x24
+#define XgRxUndersizePkts_WIDTH 32
+#define XgRxOversizePkts_offset 0x28
+#define XgRxOversizePkts_WIDTH 32
+#define XgRxJabberPkts_offset 0x2C
+#define XgRxJabberPkts_WIDTH 32
+#define XgRxUndersizeFCSerrorPkts_offset 0x30
+#define XgRxUndersizeFCSerrorPkts_WIDTH 32
+#define XgRxDropEvents_offset 0x34
+#define XgRxDropEvents_WIDTH 32
+#define XgRxFCSerrorPkts_offset 0x38
+#define XgRxFCSerrorPkts_WIDTH 32
+#define XgRxAlignError_offset 0x3C
+#define XgRxAlignError_WIDTH 32
+#define XgRxSymbolError_offset 0x40
+#define XgRxSymbolError_WIDTH 32
+#define XgRxInternalMACError_offset 0x44
+#define XgRxInternalMACError_WIDTH 32
+#define XgRxControlPkts_offset 0x48
+#define XgRxControlPkts_WIDTH 32
+#define XgRxPausePkts_offset 0x4C
+#define XgRxPausePkts_WIDTH 32
+#define XgRxPkts64Octets_offset 0x50
+#define XgRxPkts64Octets_WIDTH 32
+#define XgRxPkts65to127Octets_offset 0x54
+#define XgRxPkts65to127Octets_WIDTH 32
+#define XgRxPkts128to255Octets_offset 0x58
+#define XgRxPkts128to255Octets_WIDTH 32
+#define XgRxPkts256to511Octets_offset 0x5C
+#define XgRxPkts256to511Octets_WIDTH 32
+#define XgRxPkts512to1023Octets_offset 0x60
+#define XgRxPkts512to1023Octets_WIDTH 32
+#define XgRxPkts1024to15xxOctets_offset 0x64
+#define XgRxPkts1024to15xxOctets_WIDTH 32
+#define XgRxPkts15xxtoMaxOctets_offset 0x68
+#define XgRxPkts15xxtoMaxOctets_WIDTH 32
+#define XgRxLengthError_offset 0x6C
+#define XgRxLengthError_WIDTH 32
+#define XgTxPkts_offset 0x80
+#define XgTxPkts_WIDTH 32
+#define XgTxOctets_offset 0x88
+#define XgTxOctets_WIDTH 48
+#define XgTxMulticastPkts_offset 0x90
+#define XgTxMulticastPkts_WIDTH 32
+#define XgTxBroadcastPkts_offset 0x94
+#define XgTxBroadcastPkts_WIDTH 32
+#define XgTxUnicastPkts_offset 0x98
+#define XgTxUnicastPkts_WIDTH 32
+#define XgTxControlPkts_offset 0x9C
+#define XgTxControlPkts_WIDTH 32
+#define XgTxPausePkts_offset 0xA0
+#define XgTxPausePkts_WIDTH 32
+#define XgTxPkts64Octets_offset 0xA4
+#define XgTxPkts64Octets_WIDTH 32
+#define XgTxPkts65to127Octets_offset 0xA8
+#define XgTxPkts65to127Octets_WIDTH 32
+#define XgTxPkts128to255Octets_offset 0xAC
+#define XgTxPkts128to255Octets_WIDTH 32
+#define XgTxPkts256to511Octets_offset 0xB0
+#define XgTxPkts256to511Octets_WIDTH 32
+#define XgTxPkts512to1023Octets_offset 0xB4
+#define XgTxPkts512to1023Octets_WIDTH 32
+#define XgTxPkts1024to15xxOctets_offset 0xB8
+#define XgTxPkts1024to15xxOctets_WIDTH 32
+#define XgTxPkts1519toMaxOctets_offset 0xBC
+#define XgTxPkts1519toMaxOctets_WIDTH 32
+#define XgTxUndersizePkts_offset 0xC0
+#define XgTxUndersizePkts_WIDTH 32
+#define XgTxOversizePkts_offset 0xC4
+#define XgTxOversizePkts_WIDTH 32
+#define XgTxNonTcpUdpPkt_offset 0xC8
+#define XgTxNonTcpUdpPkt_WIDTH 16
+#define XgTxMacSrcErrPkt_offset 0xCC
+#define XgTxMacSrcErrPkt_WIDTH 16
+#define XgTxIpSrcErrPkt_offset 0xD0
+#define XgTxIpSrcErrPkt_WIDTH 16
+#define XgDmaDone_offset 0xD4
+
+#define FALCON_STATS_NOT_DONE 0x00000000
+#define FALCON_STATS_DONE 0xffffffff
+
+/* Interrupt status register bits */
+#define FATAL_INT_LBN 64
+#define FATAL_INT_WIDTH 1
+#define INT_EVQS_LBN 40
+#define INT_EVQS_WIDTH 4
+
+/**************************************************************************
+ *
+ * Falcon non-volatile configuration
+ *
+ **************************************************************************
+ */
+
+/* Board configuration v2 (v1 is obsolete; later versions are compatible) */
+struct falcon_nvconfig_board_v2 {
+	__le16 nports;
+	u8 port0_phy_addr;
+	u8 port0_phy_type;
+	u8 port1_phy_addr;
+	u8 port1_phy_type;
+	__le16 asic_sub_revision;
+	__le16 board_revision;
+} __attribute__ ((packed));
+
+#define NVCONFIG_BASE 0x300
+#define NVCONFIG_BOARD_MAGIC_NUM 0xFA1C
+struct falcon_nvconfig {
+	efx_oword_t ee_vpd_cfg_reg;			/* 0x300 */
+	u8 mac_address[2][8];			/* 0x310 */
+	efx_oword_t pcie_sd_ctl0123_reg;		/* 0x320 */
+	efx_oword_t pcie_sd_ctl45_reg;			/* 0x330 */
+	efx_oword_t pcie_pcs_ctl_stat_reg;		/* 0x340 */
+	efx_oword_t hw_init_reg;			/* 0x350 */
+	efx_oword_t nic_stat_reg;			/* 0x360 */
+	efx_oword_t glb_ctl_reg;			/* 0x370 */
+	efx_oword_t srm_cfg_reg;			/* 0x380 */
+	efx_oword_t spare_reg;				/* 0x390 */
+	__le16 board_magic_num;			/* 0x3A0 */
+	__le16 board_struct_ver;
+	__le16 board_checksum;
+	struct falcon_nvconfig_board_v2 board_v2;
+} __attribute__ ((packed));
+
+#endif /* EFX_FALCON_HWDEFS_H */
diff --git a/drivers/net/sfc/falcon_io.h b/drivers/net/sfc/falcon_io.h
new file mode 100644
index 0000000..ea08184
--- /dev/null
+++ b/drivers/net/sfc/falcon_io.h
@@ -0,0 +1,243 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2006-2008 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_FALCON_IO_H
+#define EFX_FALCON_IO_H
+
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include "net_driver.h"
+
+/**************************************************************************
+ *
+ * Falcon hardware access
+ *
+ **************************************************************************
+ *
+ * Notes on locking strategy:
+ *
+ * Most Falcon registers require 16-byte (or 8-byte, for SRAM
+ * registers) atomic writes which necessitates locking.
+ * Under normal operation few writes to the Falcon BAR are made and these
+ * registers (EVQ_RPTR_REG, RX_DESC_UPD_REG and TX_DESC_UPD_REG) are special
+ * cased to allow 4-byte (hence lockless) accesses.
+ *
+ * It *is* safe to write to these 4-byte registers in the middle of an
+ * access to an 8-byte or 16-byte register.  We therefore use a
+ * spinlock to protect accesses to the larger registers, but no locks
+ * for the 4-byte registers.
+ *
+ * A write barrier is needed to ensure that DW3 is written after DW0/1/2
+ * due to the way the 16byte registers are "collected" in the Falcon BIU
+ *
+ * We also lock when carrying out reads, to ensure consistency of the
+ * data (made possible since the BIU reads all 128 bits into a cache).
+ * Reads are very rare, so this isn't a significant performance
+ * impact.  (Most data transferred from NIC to host is DMAed directly
+ * into host memory).
+ *
+ * I/O BAR access uses locks for both reads and writes (but is only provided
+ * for testing purposes).
+ */
+
+/* Special buffer descriptors (Falcon SRAM) */
+#define BUF_TBL_KER_A1 0x18000
+#define BUF_TBL_KER_B0 0x800000
+
+
+#if BITS_PER_LONG == 64
+#define FALCON_USE_QWORD_IO 1
+#endif
+
+#define _falcon_writeq(efx, value, reg) \
+	__raw_writeq((__force u64) (value), (efx)->membase + (reg))
+#define _falcon_writel(efx, value, reg) \
+	__raw_writel((__force u32) (value), (efx)->membase + (reg))
+#define _falcon_readq(efx, reg) \
+	((__force __le64) __raw_readq((efx)->membase + (reg)))
+#define _falcon_readl(efx, reg) \
+	((__force __le32) __raw_readl((efx)->membase + (reg)))
+
+/* Writes to a normal 16-byte Falcon register, locking as appropriate. */
+static inline void falcon_write(struct efx_nic *efx, efx_oword_t *value,
+				unsigned int reg)
+{
+	unsigned long flags;
+
+	EFX_REGDUMP(efx, "writing register %x with " EFX_OWORD_FMT "\n", reg,
+		    EFX_OWORD_VAL(*value));
+
+	spin_lock_irqsave(&efx->biu_lock, flags);
+#ifdef FALCON_USE_QWORD_IO
+	_falcon_writeq(efx, value->u64[0], reg + 0);
+	wmb();
+	_falcon_writeq(efx, value->u64[1], reg + 8);
+#else
+	_falcon_writel(efx, value->u32[0], reg + 0);
+	_falcon_writel(efx, value->u32[1], reg + 4);
+	_falcon_writel(efx, value->u32[2], reg + 8);
+	wmb();
+	_falcon_writel(efx, value->u32[3], reg + 12);
+#endif
+	mmiowb();
+	spin_unlock_irqrestore(&efx->biu_lock, flags);
+}
+
+/* Writes to an 8-byte Falcon SRAM register, locking as appropriate. */
+static inline void falcon_write_sram(struct efx_nic *efx, efx_qword_t *value,
+				     unsigned int index)
+{
+	unsigned int reg = efx->type->buf_tbl_base + (index * sizeof(*value));
+	unsigned long flags;
+
+	EFX_REGDUMP(efx, "writing SRAM register %x with " EFX_QWORD_FMT "\n",
+		    reg, EFX_QWORD_VAL(*value));
+
+	spin_lock_irqsave(&efx->biu_lock, flags);
+#ifdef FALCON_USE_QWORD_IO
+	_falcon_writeq(efx, value->u64[0], reg + 0);
+#else
+	_falcon_writel(efx, value->u32[0], reg + 0);
+	wmb();
+	_falcon_writel(efx, value->u32[1], reg + 4);
+#endif
+	mmiowb();
+	spin_unlock_irqrestore(&efx->biu_lock, flags);
+}
+
+/* Write dword to Falcon register that allows partial writes
+ *
+ * Some Falcon registers (EVQ_RPTR_REG, RX_DESC_UPD_REG and
+ * TX_DESC_UPD_REG) can be written to as a single dword.  This allows
+ * for lockless writes.
+ */
+static inline void falcon_writel(struct efx_nic *efx, efx_dword_t *value,
+				 unsigned int reg)
+{
+	EFX_REGDUMP(efx, "writing partial register %x with "EFX_DWORD_FMT"\n",
+		    reg, EFX_DWORD_VAL(*value));
+
+	/* No lock required */
+	_falcon_writel(efx, value->u32[0], reg);
+}
+
+/* Read from a Falcon register
+ *
+ * This reads an entire 16-byte Falcon register in one go, locking as
+ * appropriate.  It is essential to read the first dword first, as this
+ * prompts Falcon to load the current value into the shadow register.
+ */
+static inline void falcon_read(struct efx_nic *efx, efx_oword_t *value,
+			       unsigned int reg)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&efx->biu_lock, flags);
+	value->u32[0] = _falcon_readl(efx, reg + 0);
+	rmb();
+	value->u32[1] = _falcon_readl(efx, reg + 4);
+	value->u32[2] = _falcon_readl(efx, reg + 8);
+	value->u32[3] = _falcon_readl(efx, reg + 12);
+	spin_unlock_irqrestore(&efx->biu_lock, flags);
+
+	EFX_REGDUMP(efx, "read from register %x, got " EFX_OWORD_FMT "\n", reg,
+		    EFX_OWORD_VAL(*value));
+}
+
+/* This reads an 8-byte Falcon SRAM entry in one go. */
+static inline void falcon_read_sram(struct efx_nic *efx, efx_qword_t *value,
+				    unsigned int index)
+{
+	unsigned int reg = efx->type->buf_tbl_base + (index * sizeof(*value));
+	unsigned long flags;
+
+	spin_lock_irqsave(&efx->biu_lock, flags);
+#ifdef FALCON_USE_QWORD_IO
+	value->u64[0] = _falcon_readq(efx, reg + 0);
+#else
+	value->u32[0] = _falcon_readl(efx, reg + 0);
+	rmb();
+	value->u32[1] = _falcon_readl(efx, reg + 4);
+#endif
+	spin_unlock_irqrestore(&efx->biu_lock, flags);
+
+	EFX_REGDUMP(efx, "read from SRAM register %x, got "EFX_QWORD_FMT"\n",
+		    reg, EFX_QWORD_VAL(*value));
+}
+
+/* Read dword from Falcon register that allows partial writes (sic) */
+static inline void falcon_readl(struct efx_nic *efx, efx_dword_t *value,
+				unsigned int reg)
+{
+	value->u32[0] = _falcon_readl(efx, reg);
+	EFX_REGDUMP(efx, "read from register %x, got "EFX_DWORD_FMT"\n",
+		    reg, EFX_DWORD_VAL(*value));
+}
+
+/* Write to a register forming part of a table */
+static inline void falcon_write_table(struct efx_nic *efx, efx_oword_t *value,
+				      unsigned int reg, unsigned int index)
+{
+	falcon_write(efx, value, reg + index * sizeof(efx_oword_t));
+}
+
+/* Read to a register forming part of a table */
+static inline void falcon_read_table(struct efx_nic *efx, efx_oword_t *value,
+				     unsigned int reg, unsigned int index)
+{
+	falcon_read(efx, value, reg + index * sizeof(efx_oword_t));
+}
+
+/* Write to a dword register forming part of a table */
+static inline void falcon_writel_table(struct efx_nic *efx, efx_dword_t *value,
+				       unsigned int reg, unsigned int index)
+{
+	falcon_writel(efx, value, reg + index * sizeof(efx_oword_t));
+}
+
+/* Page-mapped register block size */
+#define FALCON_PAGE_BLOCK_SIZE 0x2000
+
+/* Calculate offset to page-mapped register block */
+#define FALCON_PAGED_REG(page, reg) \
+	((page) * FALCON_PAGE_BLOCK_SIZE + (reg))
+
+/* As for falcon_write(), but for a page-mapped register. */
+static inline void falcon_write_page(struct efx_nic *efx, efx_oword_t *value,
+				     unsigned int reg, unsigned int page)
+{
+	falcon_write(efx, value, FALCON_PAGED_REG(page, reg));
+}
+
+/* As for falcon_writel(), but for a page-mapped register. */
+static inline void falcon_writel_page(struct efx_nic *efx, efx_dword_t *value,
+				      unsigned int reg, unsigned int page)
+{
+	falcon_writel(efx, value, FALCON_PAGED_REG(page, reg));
+}
+
+/* Write dword to Falcon page-mapped register with an extra lock.
+ *
+ * As for falcon_writel_page(), but for a register that suffers from
+ * SFC bug 3181. Take out a lock so the BIU collector cannot be
+ * confused. */
+static inline void falcon_writel_page_locked(struct efx_nic *efx,
+					     efx_dword_t *value,
+					     unsigned int reg,
+					     unsigned int page)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&efx->biu_lock, flags);
+	falcon_writel(efx, value, FALCON_PAGED_REG(page, reg));
+	spin_unlock_irqrestore(&efx->biu_lock, flags);
+}
+
+#endif /* EFX_FALCON_IO_H */
diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c
new file mode 100644
index 0000000..aa7521b
--- /dev/null
+++ b/drivers/net/sfc/falcon_xmac.c
@@ -0,0 +1,585 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2006-2008 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#include <linux/delay.h>
+#include "net_driver.h"
+#include "efx.h"
+#include "falcon.h"
+#include "falcon_hwdefs.h"
+#include "falcon_io.h"
+#include "mac.h"
+#include "gmii.h"
+#include "mdio_10g.h"
+#include "phy.h"
+#include "boards.h"
+#include "workarounds.h"
+
+/**************************************************************************
+ *
+ * MAC register access
+ *
+ **************************************************************************/
+
+/* Offset of an XMAC register within Falcon */
+#define FALCON_XMAC_REG(mac_reg)					\
+	(FALCON_XMAC_REGBANK + ((mac_reg) * FALCON_XMAC_REG_SIZE))
+
+void falcon_xmac_writel(struct efx_nic *efx,
+			efx_dword_t *value, unsigned int mac_reg)
+{
+	efx_oword_t temp;
+
+	EFX_POPULATE_OWORD_1(temp, MAC_DATA, EFX_DWORD_FIELD(*value, MAC_DATA));
+	falcon_write(efx, &temp, FALCON_XMAC_REG(mac_reg));
+}
+
+void falcon_xmac_readl(struct efx_nic *efx,
+		       efx_dword_t *value, unsigned int mac_reg)
+{
+	efx_oword_t temp;
+
+	falcon_read(efx, &temp, FALCON_XMAC_REG(mac_reg));
+	EFX_POPULATE_DWORD_1(*value, MAC_DATA, EFX_OWORD_FIELD(temp, MAC_DATA));
+}
+
+/**************************************************************************
+ *
+ * MAC operations
+ *
+ *************************************************************************/
+static int falcon_reset_xmac(struct efx_nic *efx)
+{
+	efx_dword_t reg;
+	int count;
+
+	EFX_POPULATE_DWORD_1(reg, XM_CORE_RST, 1);
+	falcon_xmac_writel(efx, &reg, XM_GLB_CFG_REG_MAC);
+
+	for (count = 0; count < 10000; count++) {	/* wait upto 100ms */
+		falcon_xmac_readl(efx, &reg, XM_GLB_CFG_REG_MAC);
+		if (EFX_DWORD_FIELD(reg, XM_CORE_RST) == 0)
+			return 0;
+		udelay(10);
+	}
+
+	EFX_ERR(efx, "timed out waiting for XMAC core reset\n");
+	return -ETIMEDOUT;
+}
+
+/* Configure the XAUI driver that is an output from Falcon */
+static void falcon_setup_xaui(struct efx_nic *efx)
+{
+	efx_dword_t sdctl, txdrv;
+
+	/* Move the XAUI into low power, unless there is no PHY, in
+	 * which case the XAUI will have to drive a cable. */
+	if (efx->phy_type == PHY_TYPE_NONE)
+		return;
+
+	falcon_xmac_readl(efx, &sdctl, XX_SD_CTL_REG_MAC);
+	EFX_SET_DWORD_FIELD(sdctl, XX_HIDRVD, XX_SD_CTL_DRV_DEFAULT);
+	EFX_SET_DWORD_FIELD(sdctl, XX_LODRVD, XX_SD_CTL_DRV_DEFAULT);
+	EFX_SET_DWORD_FIELD(sdctl, XX_HIDRVC, XX_SD_CTL_DRV_DEFAULT);
+	EFX_SET_DWORD_FIELD(sdctl, XX_LODRVC, XX_SD_CTL_DRV_DEFAULT);
+	EFX_SET_DWORD_FIELD(sdctl, XX_HIDRVB, XX_SD_CTL_DRV_DEFAULT);
+	EFX_SET_DWORD_FIELD(sdctl, XX_LODRVB, XX_SD_CTL_DRV_DEFAULT);
+	EFX_SET_DWORD_FIELD(sdctl, XX_HIDRVA, XX_SD_CTL_DRV_DEFAULT);
+	EFX_SET_DWORD_FIELD(sdctl, XX_LODRVA, XX_SD_CTL_DRV_DEFAULT);
+	falcon_xmac_writel(efx, &sdctl, XX_SD_CTL_REG_MAC);
+
+	EFX_POPULATE_DWORD_8(txdrv,
+			     XX_DEQD, XX_TXDRV_DEQ_DEFAULT,
+			     XX_DEQC, XX_TXDRV_DEQ_DEFAULT,
+			     XX_DEQB, XX_TXDRV_DEQ_DEFAULT,
+			     XX_DEQA, XX_TXDRV_DEQ_DEFAULT,
+			     XX_DTXD, XX_TXDRV_DTX_DEFAULT,
+			     XX_DTXC, XX_TXDRV_DTX_DEFAULT,
+			     XX_DTXB, XX_TXDRV_DTX_DEFAULT,
+			     XX_DTXA, XX_TXDRV_DTX_DEFAULT);
+	falcon_xmac_writel(efx, &txdrv, XX_TXDRV_CTL_REG_MAC);
+}
+
+static void falcon_hold_xaui_in_rst(struct efx_nic *efx)
+{
+	efx_dword_t reg;
+
+	EFX_ZERO_DWORD(reg);
+	EFX_SET_DWORD_FIELD(reg, XX_PWRDNA_EN, 1);
+	EFX_SET_DWORD_FIELD(reg, XX_PWRDNB_EN, 1);
+	EFX_SET_DWORD_FIELD(reg, XX_PWRDNC_EN, 1);
+	EFX_SET_DWORD_FIELD(reg, XX_PWRDND_EN, 1);
+	EFX_SET_DWORD_FIELD(reg, XX_RSTPLLAB_EN, 1);
+	EFX_SET_DWORD_FIELD(reg, XX_RSTPLLCD_EN, 1);
+	EFX_SET_DWORD_FIELD(reg, XX_RESETA_EN, 1);
+	EFX_SET_DWORD_FIELD(reg, XX_RESETB_EN, 1);
+	EFX_SET_DWORD_FIELD(reg, XX_RESETC_EN, 1);
+	EFX_SET_DWORD_FIELD(reg, XX_RESETD_EN, 1);
+	EFX_SET_DWORD_FIELD(reg, XX_RSTXGXSRX_EN, 1);
+	EFX_SET_DWORD_FIELD(reg, XX_RSTXGXSTX_EN, 1);
+	falcon_xmac_writel(efx, &reg, XX_PWR_RST_REG_MAC);
+	udelay(10);
+}
+
+static int _falcon_reset_xaui_a(struct efx_nic *efx)
+{
+	efx_dword_t reg;
+
+	falcon_hold_xaui_in_rst(efx);
+	falcon_xmac_readl(efx, &reg, XX_PWR_RST_REG_MAC);
+
+	/* Follow the RAMBUS XAUI data reset sequencing
+	 * Channels A and B first: power down, reset PLL, reset, clear
+	 */
+	EFX_SET_DWORD_FIELD(reg, XX_PWRDNA_EN, 0);
+	EFX_SET_DWORD_FIELD(reg, XX_PWRDNB_EN, 0);
+	falcon_xmac_writel(efx, &reg, XX_PWR_RST_REG_MAC);
+	udelay(10);
+
+	EFX_SET_DWORD_FIELD(reg, XX_RSTPLLAB_EN, 0);
+	falcon_xmac_writel(efx, &reg, XX_PWR_RST_REG_MAC);
+	udelay(10);
+
+	EFX_SET_DWORD_FIELD(reg, XX_RESETA_EN, 0);
+	EFX_SET_DWORD_FIELD(reg, XX_RESETB_EN, 0);
+	falcon_xmac_writel(efx, &reg, XX_PWR_RST_REG_MAC);
+	udelay(10);
+
+	/* Channels C and D: power down, reset PLL, reset, clear */
+	EFX_SET_DWORD_FIELD(reg, XX_PWRDNC_EN, 0);
+	EFX_SET_DWORD_FIELD(reg, XX_PWRDND_EN, 0);
+	falcon_xmac_writel(efx, &reg, XX_PWR_RST_REG_MAC);
+	udelay(10);
+
+	EFX_SET_DWORD_FIELD(reg, XX_RSTPLLCD_EN, 0);
+	falcon_xmac_writel(efx, &reg, XX_PWR_RST_REG_MAC);
+	udelay(10);
+
+	EFX_SET_DWORD_FIELD(reg, XX_RESETC_EN, 0);
+	EFX_SET_DWORD_FIELD(reg, XX_RESETD_EN, 0);
+	falcon_xmac_writel(efx, &reg, XX_PWR_RST_REG_MAC);
+	udelay(10);
+
+	/* Setup XAUI */
+	falcon_setup_xaui(efx);
+	udelay(10);
+
+	/* Take XGXS out of reset */
+	EFX_ZERO_DWORD(reg);
+	falcon_xmac_writel(efx, &reg, XX_PWR_RST_REG_MAC);
+	udelay(10);
+
+	return 0;
+}
+
+static int _falcon_reset_xaui_b(struct efx_nic *efx)
+{
+	efx_dword_t reg;
+	int count;
+
+	EFX_POPULATE_DWORD_1(reg, XX_RST_XX_EN, 1);
+	falcon_xmac_writel(efx, &reg, XX_PWR_RST_REG_MAC);
+
+	/* Give some time for the link to establish */
+	for (count = 0; count < 1000; count++) { /* wait upto 10ms */
+		falcon_xmac_readl(efx, &reg, XX_PWR_RST_REG_MAC);
+		if (EFX_DWORD_FIELD(reg, XX_RST_XX_EN) == 0) {
+			falcon_setup_xaui(efx);
+			return 0;
+		}
+		udelay(10);
+	}
+	EFX_ERR(efx, "timed out waiting for XAUI/XGXS reset\n");
+	return -ETIMEDOUT;
+}
+
+int falcon_reset_xaui(struct efx_nic *efx)
+{
+	int rc;
+
+	if (EFX_WORKAROUND_9388(efx)) {
+		falcon_hold_xaui_in_rst(efx);
+		efx->phy_op->reset_xaui(efx);
+		rc = _falcon_reset_xaui_a(efx);
+	} else {
+		rc = _falcon_reset_xaui_b(efx);
+	}
+	return rc;
+}
+
+static int falcon_xgmii_status(struct efx_nic *efx)
+{
+	efx_dword_t reg;
+
+	if (FALCON_REV(efx) < FALCON_REV_B0)
+		return 1;
+
+	/* The ISR latches, so clear it and re-read */
+	falcon_xmac_readl(efx, &reg, XM_MGT_INT_REG_MAC_B0);
+	falcon_xmac_readl(efx, &reg, XM_MGT_INT_REG_MAC_B0);
+	
+	if (EFX_DWORD_FIELD(reg, XM_LCLFLT) ||
+	    EFX_DWORD_FIELD(reg, XM_RMTFLT)) {
+		EFX_INFO(efx, "MGT_INT: "EFX_DWORD_FMT"\n", EFX_DWORD_VAL(reg));
+		return 0;
+	}
+
+	return 1;
+}
+
+static void falcon_mask_status_intr(struct efx_nic *efx, int enable)
+{
+	efx_dword_t reg;
+
+	if (FALCON_REV(efx) < FALCON_REV_B0)
+		return;
+
+	/* Flush the ISR */
+	if (enable)
+		falcon_xmac_readl(efx, &reg, XM_MGT_INT_REG_MAC_B0);
+
+	EFX_POPULATE_DWORD_2(reg,
+			     XM_MSK_RMTFLT, !enable,
+			     XM_MSK_LCLFLT, !enable);
+	falcon_xmac_writel(efx, &reg, XM_MGT_INT_MSK_REG_MAC_B0);
+}
+
+int falcon_init_xmac(struct efx_nic *efx)
+{
+	int rc;
+
+	/* Initialize the PHY first so the clock is around */
+	rc = efx->phy_op->init(efx);
+	if (rc)
+		goto fail1;
+
+	rc = falcon_reset_xaui(efx);
+	if (rc)
+		goto fail2;
+
+	/* Wait again. Give the PHY and MAC time to come back */
+	schedule_timeout_uninterruptible(HZ / 10);
+
+	rc = falcon_reset_xmac(efx);
+	if (rc)
+		goto fail2;
+
+	falcon_mask_status_intr(efx, 1);
+	return 0;
+
+ fail2:
+	efx->phy_op->fini(efx);
+ fail1:
+	return rc;
+}
+
+int falcon_xaui_link_ok(struct efx_nic *efx)
+{
+	efx_dword_t reg;
+	int align_done, sync_status, link_ok = 0;
+
+	/* Read link status */
+	falcon_xmac_readl(efx, &reg, XX_CORE_STAT_REG_MAC);
+
+	align_done = EFX_DWORD_FIELD(reg, XX_ALIGN_DONE);
+	sync_status = EFX_DWORD_FIELD(reg, XX_SYNC_STAT);
+	if (align_done && (sync_status == XX_SYNC_STAT_DECODE_SYNCED))
+		link_ok = 1;
+
+	/* Clear link status ready for next read */
+	EFX_SET_DWORD_FIELD(reg, XX_COMMA_DET, XX_COMMA_DET_RESET);
+	EFX_SET_DWORD_FIELD(reg, XX_CHARERR, XX_CHARERR_RESET);
+	EFX_SET_DWORD_FIELD(reg, XX_DISPERR, XX_DISPERR_RESET);
+	falcon_xmac_writel(efx, &reg, XX_CORE_STAT_REG_MAC);
+
+	/* If the link is up, then check the phy side of the xaui link
+	 * (error conditions from the wire side propoagate back through
+	 * the phy to the xaui side). */
+	if (efx->link_up && link_ok) {
+		int has_phyxs = efx->phy_op->mmds & (1 << MDIO_MMD_PHYXS);
+		if (has_phyxs)
+			link_ok = mdio_clause45_phyxgxs_lane_sync(efx);
+	}
+
+	/* If the PHY and XAUI links are up, then check the mac's xgmii
+	 * fault state */
+	if (efx->link_up && link_ok)
+		link_ok = falcon_xgmii_status(efx);
+
+	return link_ok;
+}
+
+static void falcon_reconfigure_xmac_core(struct efx_nic *efx)
+{
+	unsigned int max_frame_len;
+	efx_dword_t reg;
+	int rx_fc = (efx->flow_control & EFX_FC_RX) ? 1 : 0;
+
+	/* Configure MAC  - cut-thru mode is hard wired on */
+	EFX_POPULATE_DWORD_3(reg,
+			     XM_RX_JUMBO_MODE, 1,
+			     XM_TX_STAT_EN, 1,
+			     XM_RX_STAT_EN, 1);
+	falcon_xmac_writel(efx, &reg, XM_GLB_CFG_REG_MAC);
+
+	/* Configure TX */
+	EFX_POPULATE_DWORD_6(reg,
+			     XM_TXEN, 1,
+			     XM_TX_PRMBL, 1,
+			     XM_AUTO_PAD, 1,
+			     XM_TXCRC, 1,
+			     XM_FCNTL, 1,
+			     XM_IPG, 0x3);
+	falcon_xmac_writel(efx, &reg, XM_TX_CFG_REG_MAC);
+
+	/* Configure RX */
+	EFX_POPULATE_DWORD_5(reg,
+			     XM_RXEN, 1,
+			     XM_AUTO_DEPAD, 0,
+			     XM_ACPT_ALL_MCAST, 1,
+			     XM_ACPT_ALL_UCAST, efx->promiscuous,
+			     XM_PASS_CRC_ERR, 1);
+	falcon_xmac_writel(efx, &reg, XM_RX_CFG_REG_MAC);
+
+	/* Set frame length */
+	max_frame_len = EFX_MAX_FRAME_LEN(efx->net_dev->mtu);
+	EFX_POPULATE_DWORD_1(reg, XM_MAX_RX_FRM_SIZE, max_frame_len);
+	falcon_xmac_writel(efx, &reg, XM_RX_PARAM_REG_MAC);
+	EFX_POPULATE_DWORD_2(reg,
+			     XM_MAX_TX_FRM_SIZE, max_frame_len,
+			     XM_TX_JUMBO_MODE, 1);
+	falcon_xmac_writel(efx, &reg, XM_TX_PARAM_REG_MAC);
+
+	EFX_POPULATE_DWORD_2(reg,
+			     XM_PAUSE_TIME, 0xfffe, /* MAX PAUSE TIME */
+			     XM_DIS_FCNTL, rx_fc ? 0 : 1);
+	falcon_xmac_writel(efx, &reg, XM_FC_REG_MAC);
+
+	/* Set MAC address */
+	EFX_POPULATE_DWORD_4(reg,
+			     XM_ADR_0, efx->net_dev->dev_addr[0],
+			     XM_ADR_1, efx->net_dev->dev_addr[1],
+			     XM_ADR_2, efx->net_dev->dev_addr[2],
+			     XM_ADR_3, efx->net_dev->dev_addr[3]);
+	falcon_xmac_writel(efx, &reg, XM_ADR_LO_REG_MAC);
+	EFX_POPULATE_DWORD_2(reg,
+			     XM_ADR_4, efx->net_dev->dev_addr[4],
+			     XM_ADR_5, efx->net_dev->dev_addr[5]);
+	falcon_xmac_writel(efx, &reg, XM_ADR_HI_REG_MAC);
+}
+
+/* Try and bring the Falcon side of the Falcon-Phy XAUI link fails
+ * to come back up. Bash it until it comes back up */
+static int falcon_check_xaui_link_up(struct efx_nic *efx)
+{
+	int max_tries, tries;
+	tries = EFX_WORKAROUND_5147(efx) ? 5 : 1;
+	max_tries = tries;
+
+	if (efx->phy_type == PHY_TYPE_NONE)
+		return 0;
+
+	while (tries) {
+		if (falcon_xaui_link_ok(efx))
+			return 1;
+
+		EFX_LOG(efx, "%s Clobbering XAUI (%d tries left).\n",
+			__func__, tries);
+		(void) falcon_reset_xaui(efx);
+		udelay(200);
+		tries--;
+	}
+
+	EFX_ERR(efx, "Failed to bring XAUI link back up in %d tries!\n",
+		max_tries);
+	return 0;
+}
+
+void falcon_reconfigure_xmac(struct efx_nic *efx)
+{
+	int xaui_link_ok;
+
+	falcon_mask_status_intr(efx, 0);
+
+	falcon_deconfigure_mac_wrapper(efx);
+	efx->phy_op->reconfigure(efx);
+	falcon_reconfigure_xmac_core(efx);
+	falcon_reconfigure_mac_wrapper(efx);
+
+	/* Ensure XAUI link is up */
+	xaui_link_ok = falcon_check_xaui_link_up(efx);
+
+	if (xaui_link_ok && efx->link_up)
+		falcon_mask_status_intr(efx, 1);
+}
+
+void falcon_fini_xmac(struct efx_nic *efx)
+{
+	/* Isolate the MAC - PHY */
+	falcon_deconfigure_mac_wrapper(efx);
+
+	/* Potentially power down the PHY */
+	efx->phy_op->fini(efx);
+}
+
+void falcon_update_stats_xmac(struct efx_nic *efx)
+{
+	struct efx_mac_stats *mac_stats = &efx->mac_stats;
+	int rc;
+
+	rc = falcon_dma_stats(efx, XgDmaDone_offset);
+	if (rc)
+		return;
+
+	/* Update MAC stats from DMAed values */
+	FALCON_STAT(efx, XgRxOctets, rx_bytes);
+	FALCON_STAT(efx, XgRxOctetsOK, rx_good_bytes);
+	FALCON_STAT(efx, XgRxPkts, rx_packets);
+	FALCON_STAT(efx, XgRxPktsOK, rx_good);
+	FALCON_STAT(efx, XgRxBroadcastPkts, rx_broadcast);
+	FALCON_STAT(efx, XgRxMulticastPkts, rx_multicast);
+	FALCON_STAT(efx, XgRxUnicastPkts, rx_unicast);
+	FALCON_STAT(efx, XgRxUndersizePkts, rx_lt64);
+	FALCON_STAT(efx, XgRxOversizePkts, rx_gtjumbo);
+	FALCON_STAT(efx, XgRxJabberPkts, rx_bad_gtjumbo);
+	FALCON_STAT(efx, XgRxUndersizeFCSerrorPkts, rx_bad_lt64);
+	FALCON_STAT(efx, XgRxDropEvents, rx_overflow);
+	FALCON_STAT(efx, XgRxFCSerrorPkts, rx_bad);
+	FALCON_STAT(efx, XgRxAlignError, rx_align_error);
+	FALCON_STAT(efx, XgRxSymbolError, rx_symbol_error);
+	FALCON_STAT(efx, XgRxInternalMACError, rx_internal_error);
+	FALCON_STAT(efx, XgRxControlPkts, rx_control);
+	FALCON_STAT(efx, XgRxPausePkts, rx_pause);
+	FALCON_STAT(efx, XgRxPkts64Octets, rx_64);
+	FALCON_STAT(efx, XgRxPkts65to127Octets, rx_65_to_127);
+	FALCON_STAT(efx, XgRxPkts128to255Octets, rx_128_to_255);
+	FALCON_STAT(efx, XgRxPkts256to511Octets, rx_256_to_511);
+	FALCON_STAT(efx, XgRxPkts512to1023Octets, rx_512_to_1023);
+	FALCON_STAT(efx, XgRxPkts1024to15xxOctets, rx_1024_to_15xx);
+	FALCON_STAT(efx, XgRxPkts15xxtoMaxOctets, rx_15xx_to_jumbo);
+	FALCON_STAT(efx, XgRxLengthError, rx_length_error);
+	FALCON_STAT(efx, XgTxPkts, tx_packets);
+	FALCON_STAT(efx, XgTxOctets, tx_bytes);
+	FALCON_STAT(efx, XgTxMulticastPkts, tx_multicast);
+	FALCON_STAT(efx, XgTxBroadcastPkts, tx_broadcast);
+	FALCON_STAT(efx, XgTxUnicastPkts, tx_unicast);
+	FALCON_STAT(efx, XgTxControlPkts, tx_control);
+	FALCON_STAT(efx, XgTxPausePkts, tx_pause);
+	FALCON_STAT(efx, XgTxPkts64Octets, tx_64);
+	FALCON_STAT(efx, XgTxPkts65to127Octets, tx_65_to_127);
+	FALCON_STAT(efx, XgTxPkts128to255Octets, tx_128_to_255);
+	FALCON_STAT(efx, XgTxPkts256to511Octets, tx_256_to_511);
+	FALCON_STAT(efx, XgTxPkts512to1023Octets, tx_512_to_1023);
+	FALCON_STAT(efx, XgTxPkts1024to15xxOctets, tx_1024_to_15xx);
+	FALCON_STAT(efx, XgTxPkts1519toMaxOctets, tx_15xx_to_jumbo);
+	FALCON_STAT(efx, XgTxUndersizePkts, tx_lt64);
+	FALCON_STAT(efx, XgTxOversizePkts, tx_gtjumbo);
+	FALCON_STAT(efx, XgTxNonTcpUdpPkt, tx_non_tcpudp);
+	FALCON_STAT(efx, XgTxMacSrcErrPkt, tx_mac_src_error);
+	FALCON_STAT(efx, XgTxIpSrcErrPkt, tx_ip_src_error);
+
+	/* Update derived statistics */
+	mac_stats->tx_good_bytes =
+		(mac_stats->tx_bytes - mac_stats->tx_bad_bytes);
+	mac_stats->rx_bad_bytes =
+		(mac_stats->rx_bytes - mac_stats->rx_good_bytes);
+}
+
+#define EFX_XAUI_RETRAIN_MAX 8
+
+int falcon_check_xmac(struct efx_nic *efx)
+{
+	unsigned xaui_link_ok;
+	int rc;
+
+	falcon_mask_status_intr(efx, 0);
+	xaui_link_ok = falcon_xaui_link_ok(efx);
+
+	if (EFX_WORKAROUND_5147(efx) && !xaui_link_ok)
+		(void) falcon_reset_xaui(efx);
+
+	/* Call the PHY check_hw routine */
+	rc = efx->phy_op->check_hw(efx);
+
+	/* Unmask interrupt if everything was (and still is) ok */
+	if (xaui_link_ok && efx->link_up)
+		falcon_mask_status_intr(efx, 1);
+
+	return rc;
+}
+
+/* Simulate a PHY event */
+void falcon_xmac_sim_phy_event(struct efx_nic *efx)
+{
+	efx_qword_t phy_event;
+
+	EFX_POPULATE_QWORD_2(phy_event,
+			     EV_CODE, GLOBAL_EV_DECODE,
+			     XG_PHY_INTR, 1);
+	falcon_generate_event(&efx->channel[0], &phy_event);
+}
+
+int falcon_xmac_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+{
+	mdio_clause45_get_settings(efx, ecmd);
+	ecmd->transceiver = XCVR_INTERNAL;
+	ecmd->phy_address = efx->mii.phy_id;
+	ecmd->autoneg = AUTONEG_DISABLE;
+	ecmd->duplex = DUPLEX_FULL;
+	return 0;
+}
+
+int falcon_xmac_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+{
+	if (ecmd->transceiver != XCVR_INTERNAL)
+		return -EINVAL;
+	if (ecmd->autoneg != AUTONEG_DISABLE)
+		return -EINVAL;
+	if (ecmd->duplex != DUPLEX_FULL)
+		return -EINVAL;
+
+	return mdio_clause45_set_settings(efx, ecmd);
+}
+
+
+int falcon_xmac_set_pause(struct efx_nic *efx, enum efx_fc_type flow_control)
+{
+	int reset;
+
+	if (flow_control & EFX_FC_AUTO) {
+		EFX_LOG(efx, "10G does not support flow control "
+			"autonegotiation\n");
+		return -EINVAL;
+	}
+
+	if ((flow_control & EFX_FC_TX) && !(flow_control & EFX_FC_RX))
+		return -EINVAL;
+
+	/* TX flow control may automatically turn itself off if the
+	 * link partner (intermittently) stops responding to pause
+	 * frames. There isn't any indication that this has happened,
+	 * so the best we do is leave it up to the user to spot this
+	 * and fix it be cycling transmit flow control on this end. */
+	reset = ((flow_control & EFX_FC_TX) &&
+		 !(efx->flow_control & EFX_FC_TX));
+	if (EFX_WORKAROUND_11482(efx) && reset) {
+		if (FALCON_REV(efx) >= FALCON_REV_B0) {
+			/* Recover by resetting the EM block */
+			if (efx->link_up)
+				falcon_drain_tx_fifo(efx);
+		} else {
+			/* Schedule a reset to recover */
+			efx_schedule_reset(efx, RESET_TYPE_INVISIBLE);
+		}
+	}
+
+	efx->flow_control = flow_control;
+
+	return 0;
+}
diff --git a/drivers/net/sfc/gmii.h b/drivers/net/sfc/gmii.h
new file mode 100644
index 0000000..d25bbd1
--- /dev/null
+++ b/drivers/net/sfc/gmii.h
@@ -0,0 +1,195 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2006 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_GMII_H
+#define EFX_GMII_H
+
+/*
+ * GMII interface
+ */
+
+#include <linux/mii.h>
+
+/* GMII registers, excluding registers already defined as MII
+ * registers in mii.h
+ */
+#define GMII_IER		0x12	/* Interrupt enable register */
+#define GMII_ISR		0x13	/* Interrupt status register */
+
+/* Interrupt enable register */
+#define IER_ANEG_ERR		0x8000	/* Bit 15 - autonegotiation error */
+#define IER_SPEED_CHG		0x4000	/* Bit 14 - speed changed */
+#define IER_DUPLEX_CHG		0x2000	/* Bit 13 - duplex changed */
+#define IER_PAGE_RCVD		0x1000	/* Bit 12 - page received */
+#define IER_ANEG_DONE		0x0800	/* Bit 11 - autonegotiation complete */
+#define IER_LINK_CHG		0x0400	/* Bit 10 - link status changed */
+#define IER_SYM_ERR		0x0200	/* Bit 9 - symbol error */
+#define IER_FALSE_CARRIER	0x0100	/* Bit 8 - false carrier */
+#define IER_FIFO_ERR		0x0080	/* Bit 7 - FIFO over/underflow */
+#define IER_MDIX_CHG		0x0040	/* Bit 6 - MDI crossover changed */
+#define IER_DOWNSHIFT		0x0020	/* Bit 5 - downshift */
+#define IER_ENERGY		0x0010	/* Bit 4 - energy detect */
+#define IER_DTE_POWER		0x0004	/* Bit 2 - DTE power detect */
+#define IER_POLARITY_CHG	0x0002	/* Bit 1 - polarity changed */
+#define IER_JABBER		0x0001	/* Bit 0 - jabber */
+
+/* Interrupt status register */
+#define ISR_ANEG_ERR		0x8000	/* Bit 15 - autonegotiation error */
+#define ISR_SPEED_CHG		0x4000	/* Bit 14 - speed changed */
+#define ISR_DUPLEX_CHG		0x2000	/* Bit 13 - duplex changed */
+#define ISR_PAGE_RCVD		0x1000	/* Bit 12 - page received */
+#define ISR_ANEG_DONE		0x0800	/* Bit 11 - autonegotiation complete */
+#define ISR_LINK_CHG		0x0400	/* Bit 10 - link status changed */
+#define ISR_SYM_ERR		0x0200	/* Bit 9 - symbol error */
+#define ISR_FALSE_CARRIER	0x0100	/* Bit 8 - false carrier */
+#define ISR_FIFO_ERR		0x0080	/* Bit 7 - FIFO over/underflow */
+#define ISR_MDIX_CHG		0x0040	/* Bit 6 - MDI crossover changed */
+#define ISR_DOWNSHIFT		0x0020	/* Bit 5 - downshift */
+#define ISR_ENERGY		0x0010	/* Bit 4 - energy detect */
+#define ISR_DTE_POWER		0x0004	/* Bit 2 - DTE power detect */
+#define ISR_POLARITY_CHG	0x0002	/* Bit 1 - polarity changed */
+#define ISR_JABBER		0x0001	/* Bit 0 - jabber */
+
+/* Logically extended advertisement register */
+#define GM_ADVERTISE_SLCT		ADVERTISE_SLCT
+#define GM_ADVERTISE_CSMA		ADVERTISE_CSMA
+#define GM_ADVERTISE_10HALF		ADVERTISE_10HALF
+#define GM_ADVERTISE_1000XFULL		ADVERTISE_1000XFULL
+#define GM_ADVERTISE_10FULL		ADVERTISE_10FULL
+#define GM_ADVERTISE_1000XHALF		ADVERTISE_1000XHALF
+#define GM_ADVERTISE_100HALF		ADVERTISE_100HALF
+#define GM_ADVERTISE_1000XPAUSE		ADVERTISE_1000XPAUSE
+#define GM_ADVERTISE_100FULL		ADVERTISE_100FULL
+#define GM_ADVERTISE_1000XPSE_ASYM	ADVERTISE_1000XPSE_ASYM
+#define GM_ADVERTISE_100BASE4		ADVERTISE_100BASE4
+#define GM_ADVERTISE_PAUSE_CAP		ADVERTISE_PAUSE_CAP
+#define GM_ADVERTISE_PAUSE_ASYM		ADVERTISE_PAUSE_ASYM
+#define GM_ADVERTISE_RESV		ADVERTISE_RESV
+#define GM_ADVERTISE_RFAULT		ADVERTISE_RFAULT
+#define GM_ADVERTISE_LPACK		ADVERTISE_LPACK
+#define GM_ADVERTISE_NPAGE		ADVERTISE_NPAGE
+#define GM_ADVERTISE_1000FULL		(ADVERTISE_1000FULL << 8)
+#define GM_ADVERTISE_1000HALF		(ADVERTISE_1000HALF << 8)
+#define GM_ADVERTISE_1000		(GM_ADVERTISE_1000FULL | \
+					 GM_ADVERTISE_1000HALF)
+#define GM_ADVERTISE_FULL		(GM_ADVERTISE_1000FULL | \
+					 ADVERTISE_FULL)
+#define GM_ADVERTISE_ALL		(GM_ADVERTISE_1000FULL | \
+					 GM_ADVERTISE_1000HALF | \
+					 ADVERTISE_ALL)
+
+/* Logically extended link partner ability register */
+#define GM_LPA_SLCT			LPA_SLCT
+#define GM_LPA_10HALF			LPA_10HALF
+#define GM_LPA_1000XFULL		LPA_1000XFULL
+#define GM_LPA_10FULL			LPA_10FULL
+#define GM_LPA_1000XHALF		LPA_1000XHALF
+#define GM_LPA_100HALF			LPA_100HALF
+#define GM_LPA_1000XPAUSE		LPA_1000XPAUSE
+#define GM_LPA_100FULL			LPA_100FULL
+#define GM_LPA_1000XPAUSE_ASYM		LPA_1000XPAUSE_ASYM
+#define GM_LPA_100BASE4			LPA_100BASE4
+#define GM_LPA_PAUSE_CAP		LPA_PAUSE_CAP
+#define GM_LPA_PAUSE_ASYM		LPA_PAUSE_ASYM
+#define GM_LPA_RESV			LPA_RESV
+#define GM_LPA_RFAULT			LPA_RFAULT
+#define GM_LPA_LPACK			LPA_LPACK
+#define GM_LPA_NPAGE			LPA_NPAGE
+#define GM_LPA_1000FULL			(LPA_1000FULL << 6)
+#define GM_LPA_1000HALF			(LPA_1000HALF << 6)
+#define GM_LPA_10000FULL		0x00040000
+#define GM_LPA_10000HALF		0x00080000
+#define GM_LPA_DUPLEX			(GM_LPA_1000FULL | GM_LPA_10000FULL \
+					 | LPA_DUPLEX)
+#define GM_LPA_10			(LPA_10FULL | LPA_10HALF)
+#define GM_LPA_100			LPA_100
+#define GM_LPA_1000			(GM_LPA_1000FULL | GM_LPA_1000HALF)
+#define GM_LPA_10000			(GM_LPA_10000FULL | GM_LPA_10000HALF)
+
+/* Retrieve GMII autonegotiation advertised abilities
+ *
+ * The MII advertisment register (MII_ADVERTISE) is logically extended
+ * to include advertisement bits ADVERTISE_1000FULL and
+ * ADVERTISE_1000HALF from MII_CTRL1000.  The result can be tested
+ * against the GM_ADVERTISE_xxx constants.
+ */
+static inline unsigned int gmii_advertised(struct mii_if_info *gmii)
+{
+	unsigned int advertise;
+	unsigned int ctrl1000;
+
+	advertise = gmii->mdio_read(gmii->dev, gmii->phy_id, MII_ADVERTISE);
+	ctrl1000 = gmii->mdio_read(gmii->dev, gmii->phy_id, MII_CTRL1000);
+	return (((ctrl1000 << 8) & GM_ADVERTISE_1000) | advertise);
+}
+
+/* Retrieve GMII autonegotiation link partner abilities
+ *
+ * The MII link partner ability register (MII_LPA) is logically
+ * extended by adding bits LPA_1000HALF and LPA_1000FULL from
+ * MII_STAT1000.  The result can be tested against the GM_LPA_xxx
+ * constants.
+ */
+static inline unsigned int gmii_lpa(struct mii_if_info *gmii)
+{
+	unsigned int lpa;
+	unsigned int stat1000;
+
+	lpa = gmii->mdio_read(gmii->dev, gmii->phy_id, MII_LPA);
+	stat1000 = gmii->mdio_read(gmii->dev, gmii->phy_id, MII_STAT1000);
+	return (((stat1000 << 6) & GM_LPA_1000) | lpa);
+}
+
+/* Calculate GMII autonegotiated link technology
+ *
+ * "negotiated" should be the result of gmii_advertised() logically
+ * ANDed with the result of gmii_lpa().
+ *
+ * "tech" will be negotiated with the unused bits masked out.  For
+ * example, if both ends of the link are capable of both
+ * GM_LPA_1000FULL and GM_LPA_100FULL, GM_LPA_100FULL will be masked
+ * out.
+ */
+static inline unsigned int gmii_nway_result(unsigned int negotiated)
+{
+	unsigned int other_bits;
+
+	/* Mask out the speed and duplexity bits */
+	other_bits = negotiated & ~(GM_LPA_10 | GM_LPA_100 | GM_LPA_1000);
+
+	if (negotiated & GM_LPA_1000FULL)
+		return (other_bits | GM_LPA_1000FULL);
+	else if (negotiated & GM_LPA_1000HALF)
+		return (other_bits | GM_LPA_1000HALF);
+	else
+		return (other_bits | mii_nway_result(negotiated));
+}
+
+/* Calculate GMII non-autonegotiated link technology
+ *
+ * This provides an equivalent to gmii_nway_result for the case when
+ * autonegotiation is disabled.
+ */
+static inline unsigned int gmii_forced_result(unsigned int bmcr)
+{
+	unsigned int result;
+	int full_duplex;
+
+	full_duplex = bmcr & BMCR_FULLDPLX;
+	if (bmcr & BMCR_SPEED1000)
+		result = full_duplex ? GM_LPA_1000FULL : GM_LPA_1000HALF;
+	else if (bmcr & BMCR_SPEED100)
+		result = full_duplex ? GM_LPA_100FULL : GM_LPA_100HALF;
+	else
+		result = full_duplex ? GM_LPA_10FULL : GM_LPA_10HALF;
+	return result;
+}
+
+#endif /* EFX_GMII_H */
diff --git a/drivers/net/sfc/i2c-direct.c b/drivers/net/sfc/i2c-direct.c
new file mode 100644
index 0000000..b6c62d0e
--- /dev/null
+++ b/drivers/net/sfc/i2c-direct.c
@@ -0,0 +1,381 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005 Fen Systems Ltd.
+ * Copyright 2006-2008 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#include <linux/delay.h>
+#include "net_driver.h"
+#include "i2c-direct.h"
+
+/*
+ * I2C data (SDA) and clock (SCL) line read/writes with appropriate
+ * delays.
+ */
+
+static inline void setsda(struct efx_i2c_interface *i2c, int state)
+{
+	udelay(i2c->op->udelay);
+	i2c->sda = state;
+	i2c->op->setsda(i2c);
+	udelay(i2c->op->udelay);
+}
+
+static inline void setscl(struct efx_i2c_interface *i2c, int state)
+{
+	udelay(i2c->op->udelay);
+	i2c->scl = state;
+	i2c->op->setscl(i2c);
+	udelay(i2c->op->udelay);
+}
+
+static inline int getsda(struct efx_i2c_interface *i2c)
+{
+	int sda;
+
+	udelay(i2c->op->udelay);
+	sda = i2c->op->getsda(i2c);
+	udelay(i2c->op->udelay);
+	return sda;
+}
+
+static inline int getscl(struct efx_i2c_interface *i2c)
+{
+	int scl;
+
+	udelay(i2c->op->udelay);
+	scl = i2c->op->getscl(i2c);
+	udelay(i2c->op->udelay);
+	return scl;
+}
+
+/*
+ * I2C low-level protocol operations
+ *
+ */
+
+static inline void i2c_release(struct efx_i2c_interface *i2c)
+{
+	EFX_WARN_ON_PARANOID(!i2c->scl);
+	EFX_WARN_ON_PARANOID(!i2c->sda);
+	/* Devices may time out if operations do not end */
+	setscl(i2c, 1);
+	setsda(i2c, 1);
+	EFX_BUG_ON_PARANOID(getsda(i2c) != 1);
+	EFX_BUG_ON_PARANOID(getscl(i2c) != 1);
+}
+
+static inline void i2c_start(struct efx_i2c_interface *i2c)
+{
+	/* We may be restarting immediately after a {send,recv}_bit,
+	 * so SCL will not necessarily already be high.
+	 */
+	EFX_WARN_ON_PARANOID(!i2c->sda);
+	setscl(i2c, 1);
+	setsda(i2c, 0);
+	setscl(i2c, 0);
+	setsda(i2c, 1);
+}
+
+static inline void i2c_send_bit(struct efx_i2c_interface *i2c, int bit)
+{
+	EFX_WARN_ON_PARANOID(i2c->scl != 0);
+	setsda(i2c, bit);
+	setscl(i2c, 1);
+	setscl(i2c, 0);
+	setsda(i2c, 1);
+}
+
+static inline int i2c_recv_bit(struct efx_i2c_interface *i2c)
+{
+	int bit;
+
+	EFX_WARN_ON_PARANOID(i2c->scl != 0);
+	EFX_WARN_ON_PARANOID(!i2c->sda);
+	setscl(i2c, 1);
+	bit = getsda(i2c);
+	setscl(i2c, 0);
+	return bit;
+}
+
+static inline void i2c_stop(struct efx_i2c_interface *i2c)
+{
+	EFX_WARN_ON_PARANOID(i2c->scl != 0);
+	setsda(i2c, 0);
+	setscl(i2c, 1);
+	setsda(i2c, 1);
+}
+
+/*
+ * I2C mid-level protocol operations
+ *
+ */
+
+/* Sends a byte via the I2C bus and checks for an acknowledgement from
+ * the slave device.
+ */
+static int i2c_send_byte(struct efx_i2c_interface *i2c, u8 byte)
+{
+	int i;
+
+	/* Send byte */
+	for (i = 0; i < 8; i++) {
+		i2c_send_bit(i2c, !!(byte & 0x80));
+		byte <<= 1;
+	}
+
+	/* Check for acknowledgement from slave */
+	return (i2c_recv_bit(i2c) == 0 ? 0 : -EIO);
+}
+
+/* Receives a byte via the I2C bus and sends ACK/NACK to the slave device. */
+static u8 i2c_recv_byte(struct efx_i2c_interface *i2c, int ack)
+{
+	u8 value = 0;
+	int i;
+
+	/* Receive byte */
+	for (i = 0; i < 8; i++)
+		value = (value << 1) | i2c_recv_bit(i2c);
+
+	/* Send ACK/NACK */
+	i2c_send_bit(i2c, (ack ? 0 : 1));
+
+	return value;
+}
+
+/* Calculate command byte for a read operation */
+static inline u8 i2c_read_cmd(u8 device_id)
+{
+	return ((device_id << 1) | 1);
+}
+
+/* Calculate command byte for a write operation */
+static inline u8 i2c_write_cmd(u8 device_id)
+{
+	return ((device_id << 1) | 0);
+}
+
+int efx_i2c_check_presence(struct efx_i2c_interface *i2c, u8 device_id)
+{
+	int rc;
+
+	/* If someone is driving the bus low we just give up. */
+	if (getsda(i2c) == 0 || getscl(i2c) == 0) {
+		EFX_ERR(i2c->efx, "%s someone is holding the I2C bus low."
+			" Giving up.\n", __func__);
+		return -EFAULT;
+	}
+
+	/* Pretend to initiate a device write */
+	i2c_start(i2c);
+	rc = i2c_send_byte(i2c, i2c_write_cmd(device_id));
+	if (rc)
+		goto out;
+
+ out:
+	i2c_stop(i2c);
+	i2c_release(i2c);
+
+	return rc;
+}
+
+/* This performs a fast read of one or more consecutive bytes from an
+ * I2C device.  Not all devices support consecutive reads of more than
+ * one byte; for these devices use efx_i2c_read() instead.
+ */
+int efx_i2c_fast_read(struct efx_i2c_interface *i2c,
+		      u8 device_id, u8 offset, u8 *data, unsigned int len)
+{
+	int i;
+	int rc;
+
+	EFX_WARN_ON_PARANOID(getsda(i2c) != 1);
+	EFX_WARN_ON_PARANOID(getscl(i2c) != 1);
+	EFX_WARN_ON_PARANOID(data == NULL);
+	EFX_WARN_ON_PARANOID(len < 1);
+
+	/* Select device and starting offset */
+	i2c_start(i2c);
+	rc = i2c_send_byte(i2c, i2c_write_cmd(device_id));
+	if (rc)
+		goto out;
+	rc = i2c_send_byte(i2c, offset);
+	if (rc)
+		goto out;
+
+	/* Read data from device */
+	i2c_start(i2c);
+	rc = i2c_send_byte(i2c, i2c_read_cmd(device_id));
+	if (rc)
+		goto out;
+	for (i = 0; i < (len - 1); i++)
+		/* Read and acknowledge all but the last byte */
+		data[i] = i2c_recv_byte(i2c, 1);
+	/* Read last byte with no acknowledgement */
+	data[i] = i2c_recv_byte(i2c, 0);
+
+ out:
+	i2c_stop(i2c);
+	i2c_release(i2c);
+
+	return rc;
+}
+
+/* This performs a fast write of one or more consecutive bytes to an
+ * I2C device.  Not all devices support consecutive writes of more
+ * than one byte; for these devices use efx_i2c_write() instead.
+ */
+int efx_i2c_fast_write(struct efx_i2c_interface *i2c,
+		       u8 device_id, u8 offset,
+		       const u8 *data, unsigned int len)
+{
+	int i;
+	int rc;
+
+	EFX_WARN_ON_PARANOID(getsda(i2c) != 1);
+	EFX_WARN_ON_PARANOID(getscl(i2c) != 1);
+	EFX_WARN_ON_PARANOID(len < 1);
+
+	/* Select device and starting offset */
+	i2c_start(i2c);
+	rc = i2c_send_byte(i2c, i2c_write_cmd(device_id));
+	if (rc)
+		goto out;
+	rc = i2c_send_byte(i2c, offset);
+	if (rc)
+		goto out;
+
+	/* Write data to device */
+	for (i = 0; i < len; i++) {
+		rc = i2c_send_byte(i2c, data[i]);
+		if (rc)
+			goto out;
+	}
+
+ out:
+	i2c_stop(i2c);
+	i2c_release(i2c);
+
+	return rc;
+}
+
+/* I2C byte-by-byte read */
+int efx_i2c_read(struct efx_i2c_interface *i2c,
+		 u8 device_id, u8 offset, u8 *data, unsigned int len)
+{
+	int rc;
+
+	/* i2c_fast_read with length 1 is a single byte read */
+	for (; len > 0; offset++, data++, len--) {
+		rc = efx_i2c_fast_read(i2c, device_id, offset, data, 1);
+		if (rc)
+			return rc;
+	}
+
+	return 0;
+}
+
+/* I2C byte-by-byte write */
+int efx_i2c_write(struct efx_i2c_interface *i2c,
+		  u8 device_id, u8 offset, const u8 *data, unsigned int len)
+{
+	int rc;
+
+	/* i2c_fast_write with length 1 is a single byte write */
+	for (; len > 0; offset++, data++, len--) {
+		rc = efx_i2c_fast_write(i2c, device_id, offset, data, 1);
+		if (rc)
+			return rc;
+		mdelay(i2c->op->mdelay);
+	}
+
+	return 0;
+}
+
+
+/* This is just a slightly neater wrapper round efx_i2c_fast_write
+ * in the case where the target doesn't take an offset
+ */
+int efx_i2c_send_bytes(struct efx_i2c_interface *i2c,
+		       u8 device_id, const u8 *data, unsigned int len)
+{
+	return efx_i2c_fast_write(i2c, device_id, data[0], data + 1, len - 1);
+}
+
+/* I2C receiving of bytes - does not send an offset byte */
+int efx_i2c_recv_bytes(struct efx_i2c_interface *i2c, u8 device_id,
+		       u8 *bytes, unsigned int len)
+{
+	int i;
+	int rc;
+
+	EFX_WARN_ON_PARANOID(getsda(i2c) != 1);
+	EFX_WARN_ON_PARANOID(getscl(i2c) != 1);
+	EFX_WARN_ON_PARANOID(len < 1);
+
+	/* Select device */
+	i2c_start(i2c);
+
+	/* Read data from device */
+	rc = i2c_send_byte(i2c, i2c_read_cmd(device_id));
+	if (rc)
+		goto out;
+
+	for (i = 0; i < (len - 1); i++)
+		/* Read and acknowledge all but the last byte */
+		bytes[i] = i2c_recv_byte(i2c, 1);
+	/* Read last byte with no acknowledgement */
+	bytes[i] = i2c_recv_byte(i2c, 0);
+
+ out:
+	i2c_stop(i2c);
+	i2c_release(i2c);
+
+	return rc;
+}
+
+/* SMBus and some I2C devices will time out if the I2C clock is
+ * held low for too long. This is most likely to happen in virtualised
+ * systems (when the entire domain is descheduled) but could in
+ * principle happen due to preemption on any busy system (and given the
+ * potential length of an I2C operation turning preemption off is not
+ * a sensible option). The following functions deal with the failure by
+ * retrying up to a fixed number of times.
+  */
+
+#define I2C_MAX_RETRIES	(10)
+
+/* The timeout problem will result in -EIO. If the wrapped function
+ * returns any other error, pass this up and do not retry. */
+#define RETRY_WRAPPER(_f) \
+	int retries = I2C_MAX_RETRIES; \
+	int rc; \
+	while (retries) { \
+		rc = _f; \
+		if (rc != -EIO) \
+			return rc; \
+		retries--; \
+	} \
+	return rc; \
+
+int efx_i2c_check_presence_retry(struct efx_i2c_interface *i2c, u8 device_id)
+{
+	RETRY_WRAPPER(efx_i2c_check_presence(i2c, device_id))
+}
+
+int efx_i2c_read_retry(struct efx_i2c_interface *i2c,
+		 u8 device_id, u8 offset, u8 *data, unsigned int len)
+{
+	RETRY_WRAPPER(efx_i2c_read(i2c, device_id, offset, data, len))
+}
+
+int efx_i2c_write_retry(struct efx_i2c_interface *i2c,
+		  u8 device_id, u8 offset, const u8 *data, unsigned int len)
+{
+	RETRY_WRAPPER(efx_i2c_write(i2c, device_id, offset, data, len))
+}
diff --git a/drivers/net/sfc/i2c-direct.h b/drivers/net/sfc/i2c-direct.h
new file mode 100644
index 0000000..291e561
--- /dev/null
+++ b/drivers/net/sfc/i2c-direct.h
@@ -0,0 +1,91 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005 Fen Systems Ltd.
+ * Copyright 2006 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_I2C_DIRECT_H
+#define EFX_I2C_DIRECT_H
+
+#include "net_driver.h"
+
+/*
+ * Direct control of an I2C bus
+ */
+
+struct efx_i2c_interface;
+
+/**
+ * struct efx_i2c_bit_operations - I2C bus direct control methods
+ *
+ * I2C bus direct control methods.
+ *
+ * @setsda: Set state of SDA line
+ * @setscl: Set state of SCL line
+ * @getsda: Get state of SDA line
+ * @getscl: Get state of SCL line
+ * @udelay: Delay between each bit operation
+ * @mdelay: Delay between each byte write
+ */
+struct efx_i2c_bit_operations {
+	void (*setsda) (struct efx_i2c_interface *i2c);
+	void (*setscl) (struct efx_i2c_interface *i2c);
+	int (*getsda) (struct efx_i2c_interface *i2c);
+	int (*getscl) (struct efx_i2c_interface *i2c);
+	unsigned int udelay;
+	unsigned int mdelay;
+};
+
+/**
+ * struct efx_i2c_interface - an I2C interface
+ *
+ * An I2C interface.
+ *
+ * @efx: Attached Efx NIC
+ * @op: I2C bus control methods
+ * @sda: Current output state of SDA line
+ * @scl: Current output state of SCL line
+ */
+struct efx_i2c_interface {
+	struct efx_nic *efx;
+	struct efx_i2c_bit_operations *op;
+	unsigned int sda:1;
+	unsigned int scl:1;
+};
+
+extern int efx_i2c_check_presence(struct efx_i2c_interface *i2c, u8 device_id);
+extern int efx_i2c_fast_read(struct efx_i2c_interface *i2c,
+			     u8 device_id, u8 offset,
+			     u8 *data, unsigned int len);
+extern int efx_i2c_fast_write(struct efx_i2c_interface *i2c,
+			      u8 device_id, u8 offset,
+			      const u8 *data, unsigned int len);
+extern int efx_i2c_read(struct efx_i2c_interface *i2c,
+			u8 device_id, u8 offset, u8 *data, unsigned int len);
+extern int efx_i2c_write(struct efx_i2c_interface *i2c,
+			 u8 device_id, u8 offset,
+			 const u8 *data, unsigned int len);
+
+extern int efx_i2c_send_bytes(struct efx_i2c_interface *i2c, u8 device_id,
+			      const u8 *bytes, unsigned int len);
+
+extern int efx_i2c_recv_bytes(struct efx_i2c_interface *i2c, u8 device_id,
+			      u8 *bytes, unsigned int len);
+
+
+/* Versions of the API that retry on failure. */
+extern int efx_i2c_check_presence_retry(struct efx_i2c_interface *i2c,
+					u8 device_id);
+
+extern int efx_i2c_read_retry(struct efx_i2c_interface *i2c,
+			u8 device_id, u8 offset, u8 *data, unsigned int len);
+
+extern int efx_i2c_write_retry(struct efx_i2c_interface *i2c,
+			 u8 device_id, u8 offset,
+			 const u8 *data, unsigned int len);
+
+#endif /* EFX_I2C_DIRECT_H */
diff --git a/drivers/net/sfc/mac.h b/drivers/net/sfc/mac.h
new file mode 100644
index 0000000..edd07d4d
--- /dev/null
+++ b/drivers/net/sfc/mac.h
@@ -0,0 +1,33 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2006-2007 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_MAC_H
+#define EFX_MAC_H
+
+#include "net_driver.h"
+
+extern void falcon_xmac_writel(struct efx_nic *efx,
+			       efx_dword_t *value, unsigned int mac_reg);
+extern void falcon_xmac_readl(struct efx_nic *efx,
+			      efx_dword_t *value, unsigned int mac_reg);
+extern int falcon_init_xmac(struct efx_nic *efx);
+extern void falcon_reconfigure_xmac(struct efx_nic *efx);
+extern void falcon_update_stats_xmac(struct efx_nic *efx);
+extern void falcon_fini_xmac(struct efx_nic *efx);
+extern int falcon_check_xmac(struct efx_nic *efx);
+extern void falcon_xmac_sim_phy_event(struct efx_nic *efx);
+extern int falcon_xmac_get_settings(struct efx_nic *efx,
+				    struct ethtool_cmd *ecmd);
+extern int falcon_xmac_set_settings(struct efx_nic *efx,
+				    struct ethtool_cmd *ecmd);
+extern int falcon_xmac_set_pause(struct efx_nic *efx,
+				 enum efx_fc_type pause_params);
+
+#endif
diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c
new file mode 100644
index 0000000..dc06bb0
--- /dev/null
+++ b/drivers/net/sfc/mdio_10g.c
@@ -0,0 +1,282 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2006-2008 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+/*
+ * Useful functions for working with MDIO clause 45 PHYs
+ */
+#include <linux/types.h>
+#include <linux/ethtool.h>
+#include <linux/delay.h>
+#include "net_driver.h"
+#include "mdio_10g.h"
+#include "boards.h"
+
+int mdio_clause45_reset_mmd(struct efx_nic *port, int mmd,
+			    int spins, int spintime)
+{
+	u32 ctrl;
+	int phy_id = port->mii.phy_id;
+
+	/* Catch callers passing values in the wrong units (or just silly) */
+	EFX_BUG_ON_PARANOID(spins * spintime >= 5000);
+
+	mdio_clause45_write(port, phy_id, mmd, MDIO_MMDREG_CTRL1,
+			    (1 << MDIO_MMDREG_CTRL1_RESET_LBN));
+	/* Wait for the reset bit to clear. */
+	do {
+		msleep(spintime);
+		ctrl = mdio_clause45_read(port, phy_id, mmd, MDIO_MMDREG_CTRL1);
+		spins--;
+
+	} while (spins && (ctrl & (1 << MDIO_MMDREG_CTRL1_RESET_LBN)));
+
+	return spins ? spins : -ETIMEDOUT;
+}
+
+static int mdio_clause45_check_mmd(struct efx_nic *efx, int mmd,
+				   int fault_fatal)
+{
+	int status;
+	int phy_id = efx->mii.phy_id;
+
+	/* Read MMD STATUS2 to check it is responding. */
+	status = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_STAT2);
+	if (((status >> MDIO_MMDREG_STAT2_PRESENT_LBN) &
+	     ((1 << MDIO_MMDREG_STAT2_PRESENT_WIDTH) - 1)) !=
+	    MDIO_MMDREG_STAT2_PRESENT_VAL) {
+		EFX_ERR(efx, "PHY MMD %d not responding.\n", mmd);
+		return -EIO;
+	}
+
+	/* Read MMD STATUS 1 to check for fault. */
+	status = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_STAT1);
+	if ((status & (1 << MDIO_MMDREG_STAT1_FAULT_LBN)) != 0) {
+		if (fault_fatal) {
+			EFX_ERR(efx, "PHY MMD %d reporting fatal"
+				" fault: status %x\n", mmd, status);
+			return -EIO;
+		} else {
+			EFX_LOG(efx, "PHY MMD %d reporting status"
+				" %x (expected)\n", mmd, status);
+		}
+	}
+	return 0;
+}
+
+/* This ought to be ridiculous overkill. We expect it to fail rarely */
+#define MDIO45_RESET_TIME	1000 /* ms */
+#define MDIO45_RESET_ITERS	100
+
+int mdio_clause45_wait_reset_mmds(struct efx_nic *efx,
+				  unsigned int mmd_mask)
+{
+	const int spintime = MDIO45_RESET_TIME / MDIO45_RESET_ITERS;
+	int tries = MDIO45_RESET_ITERS;
+	int rc = 0;
+	int in_reset;
+
+	while (tries) {
+		int mask = mmd_mask;
+		int mmd = 0;
+		int stat;
+		in_reset = 0;
+		while (mask) {
+			if (mask & 1) {
+				stat = mdio_clause45_read(efx,
+							  efx->mii.phy_id,
+							  mmd,
+							  MDIO_MMDREG_CTRL1);
+				if (stat < 0) {
+					EFX_ERR(efx, "failed to read status of"
+						" MMD %d\n", mmd);
+					return -EIO;
+				}
+				if (stat & (1 << MDIO_MMDREG_CTRL1_RESET_LBN))
+					in_reset |= (1 << mmd);
+			}
+			mask = mask >> 1;
+			mmd++;
+		}
+		if (!in_reset)
+			break;
+		tries--;
+		msleep(spintime);
+	}
+	if (in_reset != 0) {
+		EFX_ERR(efx, "not all MMDs came out of reset in time."
+			" MMDs still in reset: %x\n", in_reset);
+		rc = -ETIMEDOUT;
+	}
+	return rc;
+}
+
+int mdio_clause45_check_mmds(struct efx_nic *efx,
+			     unsigned int mmd_mask, unsigned int fatal_mask)
+{
+	int devices, mmd = 0;
+	int probe_mmd;
+
+	/* Historically we have probed the PHYXS to find out what devices are
+	 * present,but that doesn't work so well if the PHYXS isn't expected
+	 * to exist, if so just find the first item in the list supplied. */
+	probe_mmd = (mmd_mask & MDIO_MMDREG_DEVS0_PHYXS) ? MDIO_MMD_PHYXS :
+	    __ffs(mmd_mask);
+	devices = mdio_clause45_read(efx, efx->mii.phy_id,
+				     probe_mmd, MDIO_MMDREG_DEVS0);
+
+	/* Check all the expected MMDs are present */
+	if (devices < 0) {
+		EFX_ERR(efx, "failed to read devices present\n");
+		return -EIO;
+	}
+	if ((devices & mmd_mask) != mmd_mask) {
+		EFX_ERR(efx, "required MMDs not present: got %x, "
+			"wanted %x\n", devices, mmd_mask);
+		return -ENODEV;
+	}
+	EFX_TRACE(efx, "Devices present: %x\n", devices);
+
+	/* Check all required MMDs are responding and happy. */
+	while (mmd_mask) {
+		if (mmd_mask & 1) {
+			int fault_fatal = fatal_mask & 1;
+			if (mdio_clause45_check_mmd(efx, mmd, fault_fatal))
+				return -EIO;
+		}
+		mmd_mask = mmd_mask >> 1;
+		fatal_mask = fatal_mask >> 1;
+		mmd++;
+	}
+
+	return 0;
+}
+
+int mdio_clause45_links_ok(struct efx_nic *efx, unsigned int mmd_mask)
+{
+	int phy_id = efx->mii.phy_id;
+	int status;
+	int ok = 1;
+	int mmd = 0;
+	int good;
+
+	while (mmd_mask) {
+		if (mmd_mask & 1) {
+			/* Double reads because link state is latched, and a
+			 * read moves the current state into the register */
+			status = mdio_clause45_read(efx, phy_id,
+						    mmd, MDIO_MMDREG_STAT1);
+			status = mdio_clause45_read(efx, phy_id,
+						    mmd, MDIO_MMDREG_STAT1);
+
+			good = status & (1 << MDIO_MMDREG_STAT1_LINK_LBN);
+			ok = ok && good;
+		}
+		mmd_mask = (mmd_mask >> 1);
+		mmd++;
+	}
+	return ok;
+}
+
+/**
+ * mdio_clause45_get_settings - Read (some of) the PHY settings over MDIO.
+ * @efx:		Efx NIC
+ * @ecmd: 		Buffer for settings
+ *
+ * On return the 'port', 'speed', 'supported' and 'advertising' fields of
+ * ecmd have been filled out based on the PMA type.
+ */
+void mdio_clause45_get_settings(struct efx_nic *efx,
+				struct ethtool_cmd *ecmd)
+{
+	int pma_type;
+
+	/* If no PMA is present we are presumably talking something XAUI-ish
+	 * like CX4. Which we report as FIBRE (see below) */
+	if ((efx->phy_op->mmds & DEV_PRESENT_BIT(MDIO_MMD_PMAPMD)) == 0) {
+		ecmd->speed = SPEED_10000;
+		ecmd->port = PORT_FIBRE;
+		ecmd->supported = SUPPORTED_FIBRE;
+		ecmd->advertising = ADVERTISED_FIBRE;
+		return;
+	}
+
+	pma_type = mdio_clause45_read(efx, efx->mii.phy_id,
+				      MDIO_MMD_PMAPMD, MDIO_MMDREG_CTRL2);
+	pma_type &= MDIO_PMAPMD_CTRL2_TYPE_MASK;
+
+	switch (pma_type) {
+		/* We represent CX4 as fibre in the absence of anything
+		   better. */
+	case MDIO_PMAPMD_CTRL2_10G_CX4:
+		ecmd->speed = SPEED_10000;
+		ecmd->port = PORT_FIBRE;
+		ecmd->supported = SUPPORTED_FIBRE;
+		ecmd->advertising = ADVERTISED_FIBRE;
+		break;
+		/* 10G Base-T */
+	case MDIO_PMAPMD_CTRL2_10G_BT:
+		ecmd->speed = SPEED_10000;
+		ecmd->port = PORT_TP;
+		ecmd->supported = SUPPORTED_TP | SUPPORTED_10000baseT_Full;
+		ecmd->advertising = (ADVERTISED_FIBRE
+				     | ADVERTISED_10000baseT_Full);
+		break;
+	case MDIO_PMAPMD_CTRL2_1G_BT:
+		ecmd->speed = SPEED_1000;
+		ecmd->port = PORT_TP;
+		ecmd->supported = SUPPORTED_TP | SUPPORTED_1000baseT_Full;
+		ecmd->advertising = (ADVERTISED_FIBRE
+				     | ADVERTISED_1000baseT_Full);
+		break;
+	case MDIO_PMAPMD_CTRL2_100_BT:
+		ecmd->speed = SPEED_100;
+		ecmd->port = PORT_TP;
+		ecmd->supported = SUPPORTED_TP | SUPPORTED_100baseT_Full;
+		ecmd->advertising = (ADVERTISED_FIBRE
+				     | ADVERTISED_100baseT_Full);
+		break;
+	case MDIO_PMAPMD_CTRL2_10_BT:
+		ecmd->speed = SPEED_10;
+		ecmd->port = PORT_TP;
+		ecmd->supported = SUPPORTED_TP | SUPPORTED_10baseT_Full;
+		ecmd->advertising = ADVERTISED_FIBRE | ADVERTISED_10baseT_Full;
+		break;
+	/* All the other defined modes are flavours of
+	 * 10G optical */
+	default:
+		ecmd->speed = SPEED_10000;
+		ecmd->port = PORT_FIBRE;
+		ecmd->supported = SUPPORTED_FIBRE;
+		ecmd->advertising = ADVERTISED_FIBRE;
+		break;
+	}
+}
+
+/**
+ * mdio_clause45_set_settings - Set (some of) the PHY settings over MDIO.
+ * @efx:		Efx NIC
+ * @ecmd: 		New settings
+ *
+ * Currently this just enforces that we are _not_ changing the
+ * 'port', 'speed', 'supported' or 'advertising' settings as these
+ * cannot be changed on any currently supported PHY.
+ */
+int mdio_clause45_set_settings(struct efx_nic *efx,
+			       struct ethtool_cmd *ecmd)
+{
+	struct ethtool_cmd tmpcmd;
+	mdio_clause45_get_settings(efx, &tmpcmd);
+	/* None of the current PHYs support more than one mode
+	 * of operation (and only 10GBT ever will), so keep things
+	 * simple for now */
+	if ((ecmd->speed == tmpcmd.speed) && (ecmd->port == tmpcmd.port) &&
+	    (ecmd->supported == tmpcmd.supported) &&
+	    (ecmd->advertising == tmpcmd.advertising))
+		return 0;
+	return -EOPNOTSUPP;
+}
diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/sfc/mdio_10g.h
new file mode 100644
index 0000000..2214b6d
--- /dev/null
+++ b/drivers/net/sfc/mdio_10g.h
@@ -0,0 +1,232 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2006-2008 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_MDIO_10G_H
+#define EFX_MDIO_10G_H
+
+/*
+ * Definitions needed for doing 10G MDIO as specified in clause 45
+ * MDIO, which do not appear in Linux yet. Also some helper functions.
+ */
+
+#include "efx.h"
+#include "boards.h"
+
+/* Numbering of the MDIO Manageable Devices (MMDs) */
+/* Physical Medium Attachment/ Physical Medium Dependent sublayer */
+#define MDIO_MMD_PMAPMD	(1)
+/* WAN Interface Sublayer */
+#define MDIO_MMD_WIS	(2)
+/* Physical Coding Sublayer */
+#define MDIO_MMD_PCS	(3)
+/* PHY Extender Sublayer */
+#define MDIO_MMD_PHYXS	(4)
+/* Extender Sublayer */
+#define MDIO_MMD_DTEXS	(5)
+/* Transmission convergence */
+#define MDIO_MMD_TC	(6)
+/* Auto negotiation */
+#define MDIO_MMD_AN	(7)
+
+/* Generic register locations */
+#define MDIO_MMDREG_CTRL1	(0)
+#define MDIO_MMDREG_STAT1	(1)
+#define MDIO_MMDREG_IDHI	(2)
+#define MDIO_MMDREG_IDLOW	(3)
+#define MDIO_MMDREG_SPEED	(4)
+#define MDIO_MMDREG_DEVS0	(5)
+#define MDIO_MMDREG_DEVS1	(6)
+#define MDIO_MMDREG_CTRL2	(7)
+#define MDIO_MMDREG_STAT2	(8)
+
+/* Bits in MMDREG_CTRL1 */
+/* Reset */
+#define MDIO_MMDREG_CTRL1_RESET_LBN	(15)
+#define MDIO_MMDREG_CTRL1_RESET_WIDTH	(1)
+
+/* Bits in MMDREG_STAT1 */
+#define MDIO_MMDREG_STAT1_FAULT_LBN	(7)
+#define MDIO_MMDREG_STAT1_FAULT_WIDTH	(1)
+/* Link state */
+#define MDIO_MMDREG_STAT1_LINK_LBN	(2)
+#define MDIO_MMDREG_STAT1_LINK_WIDTH	(1)
+
+/* Bits in ID reg */
+#define MDIO_ID_REV(_id32)	(_id32 & 0xf)
+#define MDIO_ID_MODEL(_id32)	((_id32 >> 4) & 0x3f)
+#define MDIO_ID_OUI(_id32)	(_id32 >> 10)
+
+/* Bits in MMDREG_DEVS0. Someone thoughtfully layed things out
+ * so the 'bit present' bit number of an MMD is the number of
+ * that MMD */
+#define DEV_PRESENT_BIT(_b) (1 << _b)
+
+#define MDIO_MMDREG_DEVS0_PHYXS	 DEV_PRESENT_BIT(MDIO_MMD_PHYXS)
+#define MDIO_MMDREG_DEVS0_PCS	 DEV_PRESENT_BIT(MDIO_MMD_PCS)
+#define MDIO_MMDREG_DEVS0_PMAPMD DEV_PRESENT_BIT(MDIO_MMD_PMAPMD)
+
+/* Bits in MMDREG_STAT2 */
+#define MDIO_MMDREG_STAT2_PRESENT_VAL	(2)
+#define MDIO_MMDREG_STAT2_PRESENT_LBN	(14)
+#define MDIO_MMDREG_STAT2_PRESENT_WIDTH (2)
+
+/* PMA type (4 bits) */
+#define MDIO_PMAPMD_CTRL2_10G_CX4	(0x0)
+#define MDIO_PMAPMD_CTRL2_10G_EW	(0x1)
+#define MDIO_PMAPMD_CTRL2_10G_LW	(0x2)
+#define MDIO_PMAPMD_CTRL2_10G_SW	(0x3)
+#define MDIO_PMAPMD_CTRL2_10G_LX4	(0x4)
+#define MDIO_PMAPMD_CTRL2_10G_ER	(0x5)
+#define MDIO_PMAPMD_CTRL2_10G_LR	(0x6)
+#define MDIO_PMAPMD_CTRL2_10G_SR	(0x7)
+/* Reserved */
+#define MDIO_PMAPMD_CTRL2_10G_BT	(0x9)
+/* Reserved */
+/* Reserved */
+#define MDIO_PMAPMD_CTRL2_1G_BT		(0xc)
+/* Reserved */
+#define MDIO_PMAPMD_CTRL2_100_BT	(0xe)
+#define MDIO_PMAPMD_CTRL2_10_BT		(0xf)
+#define MDIO_PMAPMD_CTRL2_TYPE_MASK	(0xf)
+
+/* /\* PHY XGXS lane state *\/ */
+#define MDIO_PHYXS_LANE_STATE		(0x18)
+#define MDIO_PHYXS_LANE_ALIGNED_LBN	(12)
+
+/* AN registers */
+#define MDIO_AN_STATUS			(1)
+#define MDIO_AN_STATUS_XNP_LBN		(7)
+#define MDIO_AN_STATUS_PAGE_LBN		(6)
+#define MDIO_AN_STATUS_AN_DONE_LBN	(5)
+#define MDIO_AN_STATUS_LP_AN_CAP_LBN	(0)
+
+#define MDIO_AN_10GBT_STATUS		(33)
+#define MDIO_AN_10GBT_STATUS_MS_FLT_LBN (15) /* MASTER/SLAVE config fault */
+#define MDIO_AN_10GBT_STATUS_MS_LBN     (14) /* MASTER/SLAVE config */
+#define MDIO_AN_10GBT_STATUS_LOC_OK_LBN (13) /* Local OK */
+#define MDIO_AN_10GBT_STATUS_REM_OK_LBN (12) /* Remote OK */
+#define MDIO_AN_10GBT_STATUS_LP_10G_LBN (11) /* Link partner is 10GBT capable */
+#define MDIO_AN_10GBT_STATUS_LP_LTA_LBN (10) /* LP loop timing ability */
+#define MDIO_AN_10GBT_STATUS_LP_TRR_LBN (9)  /* LP Training Reset Request */
+
+
+/* Packing of the prt and dev arguments of clause 45 style MDIO into a
+ * single int so they can be passed into the mdio_read/write functions
+ * that currently exist. Note that as Falcon is the only current user,
+ * the packed form is chosen to match what Falcon needs to write into
+ * a register. This is checked at compile-time so do not change it. If
+ * your target chip needs things layed out differently you will need
+ * to unpack the arguments in your chip-specific mdio functions.
+ */
+ /* These are defined by the standard. */
+#define MDIO45_PRT_ID_WIDTH  (5)
+#define MDIO45_DEV_ID_WIDTH  (5)
+
+/* The prt ID is just packed in immediately to the left of the dev ID */
+#define MDIO45_PRT_DEV_WIDTH (MDIO45_PRT_ID_WIDTH + MDIO45_DEV_ID_WIDTH)
+
+#define MDIO45_PRT_ID_MASK   ((1 << MDIO45_PRT_DEV_WIDTH) - 1)
+/* This is the prt + dev extended by 1 bit to hold the 'is clause 45' flag. */
+#define MDIO45_XPRT_ID_WIDTH   (MDIO45_PRT_DEV_WIDTH + 1)
+#define MDIO45_XPRT_ID_MASK   ((1 << MDIO45_XPRT_ID_WIDTH) - 1)
+#define MDIO45_XPRT_ID_IS10G   (1 << (MDIO45_XPRT_ID_WIDTH - 1))
+
+
+#define MDIO45_PRT_ID_COMP_LBN   MDIO45_DEV_ID_WIDTH
+#define MDIO45_PRT_ID_COMP_WIDTH  MDIO45_PRT_ID_WIDTH
+#define MDIO45_DEV_ID_COMP_LBN    0
+#define MDIO45_DEV_ID_COMP_WIDTH  MDIO45_DEV_ID_WIDTH
+
+/* Compose port and device into a phy_id */
+static inline int mdio_clause45_pack(u8 prt, u8 dev)
+{
+	efx_dword_t phy_id;
+	EFX_POPULATE_DWORD_2(phy_id, MDIO45_PRT_ID_COMP, prt,
+			     MDIO45_DEV_ID_COMP, dev);
+	return MDIO45_XPRT_ID_IS10G | EFX_DWORD_VAL(phy_id);
+}
+
+static inline void mdio_clause45_unpack(u32 val, u8 *prt, u8 *dev)
+{
+	efx_dword_t phy_id;
+	EFX_POPULATE_DWORD_1(phy_id, EFX_DWORD_0, val);
+	*prt = EFX_DWORD_FIELD(phy_id, MDIO45_PRT_ID_COMP);
+	*dev = EFX_DWORD_FIELD(phy_id, MDIO45_DEV_ID_COMP);
+}
+
+static inline int mdio_clause45_read(struct efx_nic *efx,
+				     u8 prt, u8 dev, u16 addr)
+{
+	return efx->mii.mdio_read(efx->net_dev,
+				  mdio_clause45_pack(prt, dev), addr);
+}
+
+static inline void mdio_clause45_write(struct efx_nic *efx,
+				       u8 prt, u8 dev, u16 addr, int value)
+{
+	efx->mii.mdio_write(efx->net_dev,
+			    mdio_clause45_pack(prt, dev), addr, value);
+}
+
+
+static inline u32 mdio_clause45_read_id(struct efx_nic *efx, int mmd)
+{
+	int phy_id = efx->mii.phy_id;
+	u16 id_low = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_IDLOW);
+	u16 id_hi = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_IDHI);
+	return (id_hi << 16) | (id_low);
+}
+
+static inline int mdio_clause45_phyxgxs_lane_sync(struct efx_nic *efx)
+{
+	int i, sync, lane_status;
+
+	for (i = 0; i < 2; ++i)
+		lane_status = mdio_clause45_read(efx, efx->mii.phy_id,
+						 MDIO_MMD_PHYXS,
+						 MDIO_PHYXS_LANE_STATE);
+
+	sync = (lane_status & (1 << MDIO_PHYXS_LANE_ALIGNED_LBN)) != 0;
+	if (!sync)
+		EFX_INFO(efx, "XGXS lane status: %x\n", lane_status);
+	return sync;
+}
+
+extern const char *mdio_clause45_mmd_name(int mmd);
+
+/*
+ * Reset a specific MMD and wait for reset to clear.
+ * Return number of spins left (>0) on success, -%ETIMEDOUT on failure.
+ *
+ * This function will sleep
+ */
+extern int mdio_clause45_reset_mmd(struct efx_nic *efx, int mmd,
+				   int spins, int spintime);
+
+/* As mdio_clause45_check_mmd but for multiple MMDs */
+int mdio_clause45_check_mmds(struct efx_nic *efx,
+			     unsigned int mmd_mask, unsigned int fatal_mask);
+
+/* Check the link status of specified mmds in bit mask */
+extern int mdio_clause45_links_ok(struct efx_nic *efx,
+				  unsigned int mmd_mask);
+
+/* Read (some of) the PHY settings over MDIO */
+extern void mdio_clause45_get_settings(struct efx_nic *efx,
+				       struct ethtool_cmd *ecmd);
+
+/* Set (some of) the PHY settings over MDIO */
+extern int mdio_clause45_set_settings(struct efx_nic *efx,
+				      struct ethtool_cmd *ecmd);
+
+/* Wait for specified MMDs to exit reset within a timeout */
+extern int mdio_clause45_wait_reset_mmds(struct efx_nic *efx,
+					 unsigned int mmd_mask);
+
+#endif /* EFX_MDIO_10G_H */
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
new file mode 100644
index 0000000..c505482
--- /dev/null
+++ b/drivers/net/sfc/net_driver.h
@@ -0,0 +1,883 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2005-2008 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+/* Common definitions for all Efx net driver code */
+
+#ifndef EFX_NET_DRIVER_H
+#define EFX_NET_DRIVER_H
+
+#include <linux/version.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/timer.h>
+#include <linux/mii.h>
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <linux/device.h>
+#include <linux/highmem.h>
+#include <linux/workqueue.h>
+#include <linux/inet_lro.h>
+
+#include "enum.h"
+#include "bitfield.h"
+#include "i2c-direct.h"
+
+#define EFX_MAX_LRO_DESCRIPTORS 8
+#define EFX_MAX_LRO_AGGR MAX_SKB_FRAGS
+
+/**************************************************************************
+ *
+ * Build definitions
+ *
+ **************************************************************************/
+#ifndef EFX_DRIVER_NAME
+#define EFX_DRIVER_NAME	"sfc"
+#endif
+#define EFX_DRIVER_VERSION	"2.2.0136"
+
+#ifdef EFX_ENABLE_DEBUG
+#define EFX_BUG_ON_PARANOID(x) BUG_ON(x)
+#define EFX_WARN_ON_PARANOID(x) WARN_ON(x)
+#else
+#define EFX_BUG_ON_PARANOID(x) do {} while (0)
+#define EFX_WARN_ON_PARANOID(x) do {} while (0)
+#endif
+
+#define NET_DEV_REGISTERED(efx)					\
+	((efx)->net_dev->reg_state == NETREG_REGISTERED)
+
+/* Include net device name in log messages if it has been registered.
+ * Use efx->name not efx->net_dev->name so that races with (un)registration
+ * are harmless.
+ */
+#define NET_DEV_NAME(efx) (NET_DEV_REGISTERED(efx) ? (efx)->name : "")
+
+/* Un-rate-limited logging */
+#define EFX_ERR(efx, fmt, args...) \
+dev_err(&((efx)->pci_dev->dev), "ERR: %s " fmt, NET_DEV_NAME(efx), ##args)
+
+#define EFX_INFO(efx, fmt, args...) \
+dev_info(&((efx)->pci_dev->dev), "INFO: %s " fmt, NET_DEV_NAME(efx), ##args)
+
+#ifdef EFX_ENABLE_DEBUG
+#define EFX_LOG(efx, fmt, args...) \
+dev_info(&((efx)->pci_dev->dev), "DBG: %s " fmt, NET_DEV_NAME(efx), ##args)
+#else
+#define EFX_LOG(efx, fmt, args...) \
+dev_dbg(&((efx)->pci_dev->dev), "DBG: %s " fmt, NET_DEV_NAME(efx), ##args)
+#endif
+
+#define EFX_TRACE(efx, fmt, args...) do {} while (0)
+
+#define EFX_REGDUMP(efx, fmt, args...) do {} while (0)
+
+/* Rate-limited logging */
+#define EFX_ERR_RL(efx, fmt, args...) \
+do {if (net_ratelimit()) EFX_ERR(efx, fmt, ##args); } while (0)
+
+#define EFX_INFO_RL(efx, fmt, args...) \
+do {if (net_ratelimit()) EFX_INFO(efx, fmt, ##args); } while (0)
+
+#define EFX_LOG_RL(efx, fmt, args...) \
+do {if (net_ratelimit()) EFX_LOG(efx, fmt, ##args); } while (0)
+
+/* Kernel headers may redefine inline anyway */
+#ifndef inline
+#define inline inline __attribute__ ((always_inline))
+#endif
+
+/**************************************************************************
+ *
+ * Efx data structures
+ *
+ **************************************************************************/
+
+#define EFX_MAX_CHANNELS 32
+#define EFX_MAX_TX_QUEUES 1
+#define EFX_MAX_RX_QUEUES EFX_MAX_CHANNELS
+
+/**
+ * struct efx_special_buffer - An Efx special buffer
+ * @addr: CPU base address of the buffer
+ * @dma_addr: DMA base address of the buffer
+ * @len: Buffer length, in bytes
+ * @index: Buffer index within controller;s buffer table
+ * @entries: Number of buffer table entries
+ *
+ * Special buffers are used for the event queues and the TX and RX
+ * descriptor queues for each channel.  They are *not* used for the
+ * actual transmit and receive buffers.
+ *
+ * Note that for Falcon, TX and RX descriptor queues live in host memory.
+ * Allocation and freeing procedures must take this into account.
+ */
+struct efx_special_buffer {
+	void *addr;
+	dma_addr_t dma_addr;
+	unsigned int len;
+	int index;
+	int entries;
+};
+
+/**
+ * struct efx_tx_buffer - An Efx TX buffer
+ * @skb: The associated socket buffer.
+ *	Set only on the final fragment of a packet; %NULL for all other
+ *	fragments.  When this fragment completes, then we can free this
+ *	skb.
+ * @dma_addr: DMA address of the fragment.
+ * @len: Length of this fragment.
+ *	This field is zero when the queue slot is empty.
+ * @continuation: True if this fragment is not the end of a packet.
+ * @unmap_single: True if pci_unmap_single should be used.
+ * @unmap_addr: DMA address to unmap
+ * @unmap_len: Length of this fragment to unmap
+ */
+struct efx_tx_buffer {
+	const struct sk_buff *skb;
+	dma_addr_t dma_addr;
+	unsigned short len;
+	unsigned char continuation;
+	unsigned char unmap_single;
+	dma_addr_t unmap_addr;
+	unsigned short unmap_len;
+};
+
+/**
+ * struct efx_tx_queue - An Efx TX queue
+ *
+ * This is a ring buffer of TX fragments.
+ * Since the TX completion path always executes on the same
+ * CPU and the xmit path can operate on different CPUs,
+ * performance is increased by ensuring that the completion
+ * path and the xmit path operate on different cache lines.
+ * This is particularly important if the xmit path is always
+ * executing on one CPU which is different from the completion
+ * path.  There is also a cache line for members which are
+ * read but not written on the fast path.
+ *
+ * @efx: The associated Efx NIC
+ * @queue: DMA queue number
+ * @used: Queue is used by net driver
+ * @channel: The associated channel
+ * @buffer: The software buffer ring
+ * @txd: The hardware descriptor ring
+ * @read_count: Current read pointer.
+ *	This is the number of buffers that have been removed from both rings.
+ * @stopped: Stopped flag.
+ *	Set if this TX queue is currently stopping its port.
+ * @insert_count: Current insert pointer
+ *	This is the number of buffers that have been added to the
+ *	software ring.
+ * @write_count: Current write pointer
+ *	This is the number of buffers that have been added to the
+ *	hardware ring.
+ * @old_read_count: The value of read_count when last checked.
+ *	This is here for performance reasons.  The xmit path will
+ *	only get the up-to-date value of read_count if this
+ *	variable indicates that the queue is full.  This is to
+ *	avoid cache-line ping-pong between the xmit path and the
+ *	completion path.
+ */
+struct efx_tx_queue {
+	/* Members which don't change on the fast path */
+	struct efx_nic *efx ____cacheline_aligned_in_smp;
+	int queue;
+	int used;
+	struct efx_channel *channel;
+	struct efx_nic *nic;
+	struct efx_tx_buffer *buffer;
+	struct efx_special_buffer txd;
+
+	/* Members used mainly on the completion path */
+	unsigned int read_count ____cacheline_aligned_in_smp;
+	int stopped;
+
+	/* Members used only on the xmit path */
+	unsigned int insert_count ____cacheline_aligned_in_smp;
+	unsigned int write_count;
+	unsigned int old_read_count;
+};
+
+/**
+ * struct efx_rx_buffer - An Efx RX data buffer
+ * @dma_addr: DMA base address of the buffer
+ * @skb: The associated socket buffer, if any.
+ *	If both this and page are %NULL, the buffer slot is currently free.
+ * @page: The associated page buffer, if any.
+ *	If both this and skb are %NULL, the buffer slot is currently free.
+ * @data: Pointer to ethernet header
+ * @len: Buffer length, in bytes.
+ * @unmap_addr: DMA address to unmap
+ */
+struct efx_rx_buffer {
+	dma_addr_t dma_addr;
+	struct sk_buff *skb;
+	struct page *page;
+	char *data;
+	unsigned int len;
+	dma_addr_t unmap_addr;
+};
+
+/**
+ * struct efx_rx_queue - An Efx RX queue
+ * @efx: The associated Efx NIC
+ * @queue: DMA queue number
+ * @used: Queue is used by net driver
+ * @channel: The associated channel
+ * @buffer: The software buffer ring
+ * @rxd: The hardware descriptor ring
+ * @added_count: Number of buffers added to the receive queue.
+ * @notified_count: Number of buffers given to NIC (<= @added_count).
+ * @removed_count: Number of buffers removed from the receive queue.
+ * @add_lock: Receive queue descriptor add spin lock.
+ *	This lock must be held in order to add buffers to the RX
+ *	descriptor ring (rxd and buffer) and to update added_count (but
+ *	not removed_count).
+ * @max_fill: RX descriptor maximum fill level (<= ring size)
+ * @fast_fill_trigger: RX descriptor fill level that will trigger a fast fill
+ *	(<= @max_fill)
+ * @fast_fill_limit: The level to which a fast fill will fill
+ *	(@fast_fill_trigger <= @fast_fill_limit <= @max_fill)
+ * @min_fill: RX descriptor minimum non-zero fill level.
+ *	This records the minimum fill level observed when a ring
+ *	refill was triggered.
+ * @min_overfill: RX descriptor minimum overflow fill level.
+ *	This records the minimum fill level at which RX queue
+ *	overflow was observed.  It should never be set.
+ * @alloc_page_count: RX allocation strategy counter.
+ * @alloc_skb_count: RX allocation strategy counter.
+ * @work: Descriptor push work thread
+ * @buf_page: Page for next RX buffer.
+ *	We can use a single page for multiple RX buffers. This tracks
+ *	the remaining space in the allocation.
+ * @buf_dma_addr: Page's DMA address.
+ * @buf_data: Page's host address.
+ */
+struct efx_rx_queue {
+	struct efx_nic *efx;
+	int queue;
+	int used;
+	struct efx_channel *channel;
+	struct efx_rx_buffer *buffer;
+	struct efx_special_buffer rxd;
+
+	int added_count;
+	int notified_count;
+	int removed_count;
+	spinlock_t add_lock;
+	unsigned int max_fill;
+	unsigned int fast_fill_trigger;
+	unsigned int fast_fill_limit;
+	unsigned int min_fill;
+	unsigned int min_overfill;
+	unsigned int alloc_page_count;
+	unsigned int alloc_skb_count;
+	struct delayed_work work;
+	unsigned int slow_fill_count;
+
+	struct page *buf_page;
+	dma_addr_t buf_dma_addr;
+	char *buf_data;
+};
+
+/**
+ * struct efx_buffer - An Efx general-purpose buffer
+ * @addr: host base address of the buffer
+ * @dma_addr: DMA base address of the buffer
+ * @len: Buffer length, in bytes
+ *
+ * Falcon uses these buffers for its interrupt status registers and
+ * MAC stats dumps.
+ */
+struct efx_buffer {
+	void *addr;
+	dma_addr_t dma_addr;
+	unsigned int len;
+};
+
+
+/* Flags for channel->used_flags */
+#define EFX_USED_BY_RX 1
+#define EFX_USED_BY_TX 2
+#define EFX_USED_BY_RX_TX (EFX_USED_BY_RX | EFX_USED_BY_TX)
+
+enum efx_rx_alloc_method {
+	RX_ALLOC_METHOD_AUTO = 0,
+	RX_ALLOC_METHOD_SKB = 1,
+	RX_ALLOC_METHOD_PAGE = 2,
+};
+
+/**
+ * struct efx_channel - An Efx channel
+ *
+ * A channel comprises an event queue, at least one TX queue, at least
+ * one RX queue, and an associated tasklet for processing the event
+ * queue.
+ *
+ * @efx: Associated Efx NIC
+ * @evqnum: Event queue number
+ * @channel: Channel instance number
+ * @used_flags: Channel is used by net driver
+ * @enabled: Channel enabled indicator
+ * @irq: IRQ number (MSI and MSI-X only)
+ * @has_interrupt: Channel has an interrupt
+ * @irq_moderation: IRQ moderation value (in us)
+ * @napi_dev: Net device used with NAPI
+ * @napi_str: NAPI control structure
+ * @reset_work: Scheduled reset work thread
+ * @work_pending: Is work pending via NAPI?
+ * @eventq: Event queue buffer
+ * @eventq_read_ptr: Event queue read pointer
+ * @last_eventq_read_ptr: Last event queue read pointer value.
+ * @eventq_magic: Event queue magic value for driver-generated test events
+ * @lro_mgr: LRO state
+ * @rx_alloc_level: Watermark based heuristic counter for pushing descriptors
+ *	and diagnostic counters
+ * @rx_alloc_push_pages: RX allocation method currently in use for pushing
+ *	descriptors
+ * @rx_alloc_pop_pages: RX allocation method currently in use for popping
+ *	descriptors
+ * @n_rx_tobe_disc: Count of RX_TOBE_DISC errors
+ * @n_rx_ip_frag_err: Count of RX IP fragment errors
+ * @n_rx_ip_hdr_chksum_err: Count of RX IP header checksum errors
+ * @n_rx_tcp_udp_chksum_err: Count of RX TCP and UDP checksum errors
+ * @n_rx_frm_trunc: Count of RX_FRM_TRUNC errors
+ * @n_rx_overlength: Count of RX_OVERLENGTH errors
+ * @n_skbuff_leaks: Count of skbuffs leaked due to RX overrun
+ */
+struct efx_channel {
+	struct efx_nic *efx;
+	int evqnum;
+	int channel;
+	int used_flags;
+	int enabled;
+	int irq;
+	unsigned int has_interrupt;
+	unsigned int irq_moderation;
+	struct net_device *napi_dev;
+	struct napi_struct napi_str;
+	struct work_struct reset_work;
+	int work_pending;
+	struct efx_special_buffer eventq;
+	unsigned int eventq_read_ptr;
+	unsigned int last_eventq_read_ptr;
+	unsigned int eventq_magic;
+
+	struct net_lro_mgr lro_mgr;
+	int rx_alloc_level;
+	int rx_alloc_push_pages;
+	int rx_alloc_pop_pages;
+
+	unsigned n_rx_tobe_disc;
+	unsigned n_rx_ip_frag_err;
+	unsigned n_rx_ip_hdr_chksum_err;
+	unsigned n_rx_tcp_udp_chksum_err;
+	unsigned n_rx_frm_trunc;
+	unsigned n_rx_overlength;
+	unsigned n_skbuff_leaks;
+
+	/* Used to pipeline received packets in order to optimise memory
+	 * access with prefetches.
+	 */
+	struct efx_rx_buffer *rx_pkt;
+	int rx_pkt_csummed;
+
+};
+
+/**
+ * struct efx_blinker - S/W LED blinking context
+ * @led_num: LED ID (board-specific meaning)
+ * @state: Current state - on or off
+ * @resubmit: Timer resubmission flag
+ * @timer: Control timer for blinking
+ */
+struct efx_blinker {
+	int led_num;
+	int state;
+	int resubmit;
+	struct timer_list timer;
+};
+
+
+/**
+ * struct efx_board - board information
+ * @type: Board model type
+ * @major: Major rev. ('A', 'B' ...)
+ * @minor: Minor rev. (0, 1, ...)
+ * @init: Initialisation function
+ * @init_leds: Sets up board LEDs
+ * @set_fault_led: Turns the fault LED on or off
+ * @blink: Starts/stops blinking
+ * @blinker: used to blink LEDs in software
+ */
+struct efx_board {
+	int type;
+	int major;
+	int minor;
+	int (*init) (struct efx_nic *nic);
+	/* As the LEDs are typically attached to the PHY, LEDs
+	 * have a separate init callback that happens later than
+	 * board init. */
+	int (*init_leds)(struct efx_nic *efx);
+	void (*set_fault_led) (struct efx_nic *efx, int state);
+	void (*blink) (struct efx_nic *efx, int start);
+	struct efx_blinker blinker;
+};
+
+enum efx_int_mode {
+	/* Be careful if altering to correct macro below */
+	EFX_INT_MODE_MSIX = 0,
+	EFX_INT_MODE_MSI = 1,
+	EFX_INT_MODE_LEGACY = 2,
+	EFX_INT_MODE_MAX	/* Insert any new items before this */
+};
+#define EFX_INT_MODE_USE_MSI(x) (((x)->interrupt_mode) <= EFX_INT_MODE_MSI)
+
+enum phy_type {
+	PHY_TYPE_NONE = 0,
+	PHY_TYPE_CX4_RTMR = 1,
+	PHY_TYPE_1G_ALASKA = 2,
+	PHY_TYPE_10XPRESS = 3,
+	PHY_TYPE_XFP = 4,
+	PHY_TYPE_PM8358 = 6,
+	PHY_TYPE_MAX	/* Insert any new items before this */
+};
+
+#define PHY_ADDR_INVALID 0xff
+
+enum nic_state {
+	STATE_INIT = 0,
+	STATE_RUNNING = 1,
+	STATE_FINI = 2,
+	STATE_RESETTING = 3, /* rtnl_lock always held */
+	STATE_DISABLED = 4,
+	STATE_MAX,
+};
+
+/*
+ * Alignment of page-allocated RX buffers
+ *
+ * Controls the number of bytes inserted at the start of an RX buffer.
+ * This is the equivalent of NET_IP_ALIGN [which controls the alignment
+ * of the skb->head for hardware DMA].
+ */
+#if defined(__i386__) || defined(__x86_64__)
+#define EFX_PAGE_IP_ALIGN 0
+#else
+#define EFX_PAGE_IP_ALIGN NET_IP_ALIGN
+#endif
+
+/*
+ * Alignment of the skb->head which wraps a page-allocated RX buffer
+ *
+ * The skb allocated to wrap an rx_buffer can have this alignment. Since
+ * the data is memcpy'd from the rx_buf, it does not need to be equal to
+ * EFX_PAGE_IP_ALIGN.
+ */
+#define EFX_PAGE_SKB_ALIGN 2
+
+/* Forward declaration */
+struct efx_nic;
+
+/* Pseudo bit-mask flow control field */
+enum efx_fc_type {
+	EFX_FC_RX = 1,
+	EFX_FC_TX = 2,
+	EFX_FC_AUTO = 4,
+};
+
+/**
+ * struct efx_phy_operations - Efx PHY operations table
+ * @init: Initialise PHY
+ * @fini: Shut down PHY
+ * @reconfigure: Reconfigure PHY (e.g. for new link parameters)
+ * @clear_interrupt: Clear down interrupt
+ * @blink: Blink LEDs
+ * @check_hw: Check hardware
+ * @reset_xaui: Reset XAUI side of PHY for (software sequenced reset)
+ * @mmds: MMD presence mask
+ */
+struct efx_phy_operations {
+	int (*init) (struct efx_nic *efx);
+	void (*fini) (struct efx_nic *efx);
+	void (*reconfigure) (struct efx_nic *efx);
+	void (*clear_interrupt) (struct efx_nic *efx);
+	int (*check_hw) (struct efx_nic *efx);
+	void (*reset_xaui) (struct efx_nic *efx);
+	int mmds;
+};
+
+/*
+ * Efx extended statistics
+ *
+ * Not all statistics are provided by all supported MACs.  The purpose
+ * is this structure is to contain the raw statistics provided by each
+ * MAC.
+ */
+struct efx_mac_stats {
+	u64 tx_bytes;
+	u64 tx_good_bytes;
+	u64 tx_bad_bytes;
+	unsigned long tx_packets;
+	unsigned long tx_bad;
+	unsigned long tx_pause;
+	unsigned long tx_control;
+	unsigned long tx_unicast;
+	unsigned long tx_multicast;
+	unsigned long tx_broadcast;
+	unsigned long tx_lt64;
+	unsigned long tx_64;
+	unsigned long tx_65_to_127;
+	unsigned long tx_128_to_255;
+	unsigned long tx_256_to_511;
+	unsigned long tx_512_to_1023;
+	unsigned long tx_1024_to_15xx;
+	unsigned long tx_15xx_to_jumbo;
+	unsigned long tx_gtjumbo;
+	unsigned long tx_collision;
+	unsigned long tx_single_collision;
+	unsigned long tx_multiple_collision;
+	unsigned long tx_excessive_collision;
+	unsigned long tx_deferred;
+	unsigned long tx_late_collision;
+	unsigned long tx_excessive_deferred;
+	unsigned long tx_non_tcpudp;
+	unsigned long tx_mac_src_error;
+	unsigned long tx_ip_src_error;
+	u64 rx_bytes;
+	u64 rx_good_bytes;
+	u64 rx_bad_bytes;
+	unsigned long rx_packets;
+	unsigned long rx_good;
+	unsigned long rx_bad;
+	unsigned long rx_pause;
+	unsigned long rx_control;
+	unsigned long rx_unicast;
+	unsigned long rx_multicast;
+	unsigned long rx_broadcast;
+	unsigned long rx_lt64;
+	unsigned long rx_64;
+	unsigned long rx_65_to_127;
+	unsigned long rx_128_to_255;
+	unsigned long rx_256_to_511;
+	unsigned long rx_512_to_1023;
+	unsigned long rx_1024_to_15xx;
+	unsigned long rx_15xx_to_jumbo;
+	unsigned long rx_gtjumbo;
+	unsigned long rx_bad_lt64;
+	unsigned long rx_bad_64_to_15xx;
+	unsigned long rx_bad_15xx_to_jumbo;
+	unsigned long rx_bad_gtjumbo;
+	unsigned long rx_overflow;
+	unsigned long rx_missed;
+	unsigned long rx_false_carrier;
+	unsigned long rx_symbol_error;
+	unsigned long rx_align_error;
+	unsigned long rx_length_error;
+	unsigned long rx_internal_error;
+	unsigned long rx_good_lt64;
+};
+
+/* Number of bits used in a multicast filter hash address */
+#define EFX_MCAST_HASH_BITS 8
+
+/* Number of (single-bit) entries in a multicast filter hash */
+#define EFX_MCAST_HASH_ENTRIES (1 << EFX_MCAST_HASH_BITS)
+
+/* An Efx multicast filter hash */
+union efx_multicast_hash {
+	u8 byte[EFX_MCAST_HASH_ENTRIES / 8];
+	efx_oword_t oword[EFX_MCAST_HASH_ENTRIES / sizeof(efx_oword_t) / 8];
+};
+
+/**
+ * struct efx_nic - an Efx NIC
+ * @name: Device name (net device name or bus id before net device registered)
+ * @pci_dev: The PCI device
+ * @type: Controller type attributes
+ * @legacy_irq: IRQ number
+ * @workqueue: Workqueue for resets, port reconfigures and the HW monitor
+ * @reset_work: Scheduled reset workitem
+ * @monitor_work: Hardware monitor workitem
+ * @membase_phys: Memory BAR value as physical address
+ * @membase: Memory BAR value
+ * @biu_lock: BIU (bus interface unit) lock
+ * @interrupt_mode: Interrupt mode
+ * @i2c: I2C interface
+ * @board_info: Board-level information
+ * @state: Device state flag. Serialised by the rtnl_lock.
+ * @reset_pending: Pending reset method (normally RESET_TYPE_NONE)
+ * @tx_queue: TX DMA queues
+ * @rx_queue: RX DMA queues
+ * @channel: Channels
+ * @rss_queues: Number of RSS queues
+ * @rx_buffer_len: RX buffer length
+ * @rx_buffer_order: Order (log2) of number of pages for each RX buffer
+ * @irq_status: Interrupt status buffer
+ * @last_irq_cpu: Last CPU to handle interrupt.
+ *	This register is written with the SMP processor ID whenever an
+ *	interrupt is handled.  It is used by falcon_test_interrupt()
+ *	to verify that an interrupt has occurred.
+ * @n_rx_nodesc_drop_cnt: RX no descriptor drop count
+ * @nic_data: Hardware dependant state
+ * @mac_lock: MAC access lock. Protects @port_enabled, efx_monitor() and
+ *	efx_reconfigure_port()
+ * @port_enabled: Port enabled indicator.
+ *	Serialises efx_stop_all(), efx_start_all() and efx_monitor() and
+ *	efx_reconfigure_work with kernel interfaces. Safe to read under any
+ *	one of the rtnl_lock, mac_lock, or netif_tx_lock, but all three must
+ *	be held to modify it.
+ * @port_initialized: Port initialized?
+ * @net_dev: Operating system network device. Consider holding the rtnl lock
+ * @rx_checksum_enabled: RX checksumming enabled
+ * @netif_stop_count: Port stop count
+ * @netif_stop_lock: Port stop lock
+ * @mac_stats: MAC statistics. These include all statistics the MACs
+ *	can provide.  Generic code converts these into a standard
+ *	&struct net_device_stats.
+ * @stats_buffer: DMA buffer for statistics
+ * @stats_lock: Statistics update lock
+ * @mac_address: Permanent MAC address
+ * @phy_type: PHY type
+ * @phy_lock: PHY access lock
+ * @phy_op: PHY interface
+ * @phy_data: PHY private data (including PHY-specific stats)
+ * @mii: PHY interface
+ * @phy_powered: PHY power state
+ * @tx_disabled: PHY transmitter turned off
+ * @link_up: Link status
+ * @link_options: Link options (MII/GMII format)
+ * @n_link_state_changes: Number of times the link has changed state
+ * @promiscuous: Promiscuous flag. Protected by netif_tx_lock.
+ * @multicast_hash: Multicast hash table
+ * @flow_control: Flow control flags - separate RX/TX so can't use link_options
+ * @reconfigure_work: work item for dealing with PHY events
+ *
+ * The @priv field of the corresponding &struct net_device points to
+ * this.
+ */
+struct efx_nic {
+	char name[IFNAMSIZ];
+	struct pci_dev *pci_dev;
+	const struct efx_nic_type *type;
+	int legacy_irq;
+	struct workqueue_struct *workqueue;
+	struct work_struct reset_work;
+	struct delayed_work monitor_work;
+	unsigned long membase_phys;
+	void __iomem *membase;
+	spinlock_t biu_lock;
+	enum efx_int_mode interrupt_mode;
+
+	struct efx_i2c_interface i2c;
+	struct efx_board board_info;
+
+	enum nic_state state;
+	enum reset_type reset_pending;
+
+	struct efx_tx_queue tx_queue[EFX_MAX_TX_QUEUES];
+	struct efx_rx_queue rx_queue[EFX_MAX_RX_QUEUES];
+	struct efx_channel channel[EFX_MAX_CHANNELS];
+
+	int rss_queues;
+	unsigned int rx_buffer_len;
+	unsigned int rx_buffer_order;
+
+	struct efx_buffer irq_status;
+	volatile signed int last_irq_cpu;
+
+	unsigned n_rx_nodesc_drop_cnt;
+
+	void *nic_data;
+
+	struct mutex mac_lock;
+	int port_enabled;
+
+	int port_initialized;
+	struct net_device *net_dev;
+	int rx_checksum_enabled;
+
+	atomic_t netif_stop_count;
+	spinlock_t netif_stop_lock;
+
+	struct efx_mac_stats mac_stats;
+	struct efx_buffer stats_buffer;
+	spinlock_t stats_lock;
+
+	unsigned char mac_address[ETH_ALEN];
+
+	enum phy_type phy_type;
+	spinlock_t phy_lock;
+	struct efx_phy_operations *phy_op;
+	void *phy_data;
+	struct mii_if_info mii;
+
+	int link_up;
+	unsigned int link_options;
+	unsigned int n_link_state_changes;
+
+	int promiscuous;
+	union efx_multicast_hash multicast_hash;
+	enum efx_fc_type flow_control;
+	struct work_struct reconfigure_work;
+
+	atomic_t rx_reset;
+};
+
+/**
+ * struct efx_nic_type - Efx device type definition
+ * @mem_bar: Memory BAR number
+ * @mem_map_size: Memory BAR mapped size
+ * @txd_ptr_tbl_base: TX descriptor ring base address
+ * @rxd_ptr_tbl_base: RX descriptor ring base address
+ * @buf_tbl_base: Buffer table base address
+ * @evq_ptr_tbl_base: Event queue pointer table base address
+ * @evq_rptr_tbl_base: Event queue read-pointer table base address
+ * @txd_ring_mask: TX descriptor ring size - 1 (must be a power of two - 1)
+ * @rxd_ring_mask: RX descriptor ring size - 1 (must be a power of two - 1)
+ * @evq_size: Event queue size (must be a power of two)
+ * @max_dma_mask: Maximum possible DMA mask
+ * @tx_dma_mask: TX DMA mask
+ * @bug5391_mask: Address mask for bug 5391 workaround
+ * @rx_xoff_thresh: RX FIFO XOFF watermark (bytes)
+ * @rx_xon_thresh: RX FIFO XON watermark (bytes)
+ * @rx_buffer_padding: Padding added to each RX buffer
+ * @max_interrupt_mode: Highest capability interrupt mode supported
+ *	from &enum efx_init_mode.
+ * @phys_addr_channels: Number of channels with physically addressed
+ *	descriptors
+ */
+struct efx_nic_type {
+	unsigned int mem_bar;
+	unsigned int mem_map_size;
+	unsigned int txd_ptr_tbl_base;
+	unsigned int rxd_ptr_tbl_base;
+	unsigned int buf_tbl_base;
+	unsigned int evq_ptr_tbl_base;
+	unsigned int evq_rptr_tbl_base;
+
+	unsigned int txd_ring_mask;
+	unsigned int rxd_ring_mask;
+	unsigned int evq_size;
+	dma_addr_t max_dma_mask;
+	unsigned int tx_dma_mask;
+	unsigned bug5391_mask;
+
+	int rx_xoff_thresh;
+	int rx_xon_thresh;
+	unsigned int rx_buffer_padding;
+	unsigned int max_interrupt_mode;
+	unsigned int phys_addr_channels;
+};
+
+/**************************************************************************
+ *
+ * Prototypes and inline functions
+ *
+ *************************************************************************/
+
+/* Iterate over all used channels */
+#define efx_for_each_channel(_channel, _efx)				\
+	for (_channel = &_efx->channel[0];				\
+	     _channel < &_efx->channel[EFX_MAX_CHANNELS];		\
+	     _channel++)						\
+		if (!_channel->used_flags)				\
+			continue;					\
+		else
+
+/* Iterate over all used channels with interrupts */
+#define efx_for_each_channel_with_interrupt(_channel, _efx)		\
+	for (_channel = &_efx->channel[0];				\
+	     _channel < &_efx->channel[EFX_MAX_CHANNELS];		\
+	     _channel++)						\
+		if (!(_channel->used_flags && _channel->has_interrupt))	\
+			continue;					\
+		else
+
+/* Iterate over all used TX queues */
+#define efx_for_each_tx_queue(_tx_queue, _efx)				\
+	for (_tx_queue = &_efx->tx_queue[0];				\
+	     _tx_queue < &_efx->tx_queue[EFX_MAX_TX_QUEUES];		\
+	     _tx_queue++)						\
+		if (!_tx_queue->used)					\
+			continue;					\
+		else
+
+/* Iterate over all TX queues belonging to a channel */
+#define efx_for_each_channel_tx_queue(_tx_queue, _channel)		\
+	for (_tx_queue = &_channel->efx->tx_queue[0];			\
+	     _tx_queue < &_channel->efx->tx_queue[EFX_MAX_TX_QUEUES];	\
+	     _tx_queue++)						\
+		if ((!_tx_queue->used) ||				\
+		    (_tx_queue->channel != _channel))			\
+			continue;					\
+		else
+
+/* Iterate over all used RX queues */
+#define efx_for_each_rx_queue(_rx_queue, _efx)				\
+	for (_rx_queue = &_efx->rx_queue[0];				\
+	     _rx_queue < &_efx->rx_queue[EFX_MAX_RX_QUEUES];		\
+	     _rx_queue++)						\
+		if (!_rx_queue->used)					\
+			continue;					\
+		else
+
+/* Iterate over all RX queues belonging to a channel */
+#define efx_for_each_channel_rx_queue(_rx_queue, _channel)		\
+	for (_rx_queue = &_channel->efx->rx_queue[0];			\
+	     _rx_queue < &_channel->efx->rx_queue[EFX_MAX_RX_QUEUES];	\
+	     _rx_queue++)						\
+		if ((!_rx_queue->used) ||				\
+		    (_rx_queue->channel != _channel))			\
+			continue;					\
+		else
+
+/* Returns a pointer to the specified receive buffer in the RX
+ * descriptor queue.
+ */
+static inline struct efx_rx_buffer *efx_rx_buffer(struct efx_rx_queue *rx_queue,
+						  unsigned int index)
+{
+	return (&rx_queue->buffer[index]);
+}
+
+/* Set bit in a little-endian bitfield */
+static inline void set_bit_le(int nr, unsigned char *addr)
+{
+	addr[nr / 8] |= (1 << (nr % 8));
+}
+
+/* Clear bit in a little-endian bitfield */
+static inline void clear_bit_le(int nr, unsigned char *addr)
+{
+	addr[nr / 8] &= ~(1 << (nr % 8));
+}
+
+
+/**
+ * EFX_MAX_FRAME_LEN - calculate maximum frame length
+ *
+ * This calculates the maximum frame length that will be used for a
+ * given MTU.  The frame length will be equal to the MTU plus a
+ * constant amount of header space and padding.  This is the quantity
+ * that the net driver will program into the MAC as the maximum frame
+ * length.
+ *
+ * The 10G MAC used in Falcon requires 8-byte alignment on the frame
+ * length, so we round up to the nearest 8.
+ */
+#define EFX_MAX_FRAME_LEN(mtu) \
+	((((mtu) + ETH_HLEN + VLAN_HLEN + 4/* FCS */) + 7) & ~7)
+
+
+#endif /* EFX_NET_DRIVER_H */
diff --git a/drivers/net/sfc/phy.h b/drivers/net/sfc/phy.h
new file mode 100644
index 0000000..9d02c84
--- /dev/null
+++ b/drivers/net/sfc/phy.h
@@ -0,0 +1,48 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2007 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_PHY_H
+#define EFX_PHY_H
+
+/****************************************************************************
+ * 10Xpress (SFX7101) PHY
+ */
+extern struct efx_phy_operations falcon_tenxpress_phy_ops;
+
+enum tenxpress_state {
+	TENXPRESS_STATUS_OFF = 0,
+	TENXPRESS_STATUS_OTEMP = 1,
+	TENXPRESS_STATUS_NORMAL = 2,
+};
+
+extern void tenxpress_set_state(struct efx_nic *efx,
+				enum tenxpress_state state);
+extern void tenxpress_phy_blink(struct efx_nic *efx, int blink);
+extern void tenxpress_crc_err(struct efx_nic *efx);
+
+/****************************************************************************
+ * Exported functions from the driver for XFP optical PHYs
+ */
+extern struct efx_phy_operations falcon_xfp_phy_ops;
+
+/* The QUAKE XFP PHY provides various H/W control states for LEDs */
+#define QUAKE_LED_LINK_INVAL	(0)
+#define QUAKE_LED_LINK_STAT	(1)
+#define QUAKE_LED_LINK_ACT	(2)
+#define QUAKE_LED_LINK_ACTSTAT	(3)
+#define QUAKE_LED_OFF		(4)
+#define QUAKE_LED_ON		(5)
+#define QUAKE_LED_LINK_INPUT	(6)	/* Pin is an input. */
+/* What link the LED tracks */
+#define QUAKE_LED_TXLINK	(0)
+#define QUAKE_LED_RXLINK	(8)
+
+extern void xfp_set_led(struct efx_nic *p, int led, int state);
+
+#endif
diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c
new file mode 100644
index 0000000..551299b
--- /dev/null
+++ b/drivers/net/sfc/rx.c
@@ -0,0 +1,875 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2005-2008 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#include <linux/socket.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/udp.h>
+#include <net/ip.h>
+#include <net/checksum.h>
+#include "net_driver.h"
+#include "rx.h"
+#include "efx.h"
+#include "falcon.h"
+#include "workarounds.h"
+
+/* Number of RX descriptors pushed at once. */
+#define EFX_RX_BATCH  8
+
+/* Size of buffer allocated for skb header area. */
+#define EFX_SKB_HEADERS  64u
+
+/*
+ * rx_alloc_method - RX buffer allocation method
+ *
+ * This driver supports two methods for allocating and using RX buffers:
+ * each RX buffer may be backed by an skb or by an order-n page.
+ *
+ * When LRO is in use then the second method has a lower overhead,
+ * since we don't have to allocate then free skbs on reassembled frames.
+ *
+ * Values:
+ *   - RX_ALLOC_METHOD_AUTO = 0
+ *   - RX_ALLOC_METHOD_SKB  = 1
+ *   - RX_ALLOC_METHOD_PAGE = 2
+ *
+ * The heuristic for %RX_ALLOC_METHOD_AUTO is a simple hysteresis count
+ * controlled by the parameters below.
+ *
+ *   - Since pushing and popping descriptors are separated by the rx_queue
+ *     size, so the watermarks should be ~rxd_size.
+ *   - The performance win by using page-based allocation for LRO is less
+ *     than the performance hit of using page-based allocation of non-LRO,
+ *     so the watermarks should reflect this.
+ *
+ * Per channel we maintain a single variable, updated by each channel:
+ *
+ *   rx_alloc_level += (lro_performed ? RX_ALLOC_FACTOR_LRO :
+ *                      RX_ALLOC_FACTOR_SKB)
+ * Per NAPI poll interval, we constrain rx_alloc_level to 0..MAX (which
+ * limits the hysteresis), and update the allocation strategy:
+ *
+ *   rx_alloc_method = (rx_alloc_level > RX_ALLOC_LEVEL_LRO ?
+ *                      RX_ALLOC_METHOD_PAGE : RX_ALLOC_METHOD_SKB)
+ */
+static int rx_alloc_method = RX_ALLOC_METHOD_PAGE;
+
+#define RX_ALLOC_LEVEL_LRO 0x2000
+#define RX_ALLOC_LEVEL_MAX 0x3000
+#define RX_ALLOC_FACTOR_LRO 1
+#define RX_ALLOC_FACTOR_SKB (-2)
+
+/* This is the percentage fill level below which new RX descriptors
+ * will be added to the RX descriptor ring.
+ */
+static unsigned int rx_refill_threshold = 90;
+
+/* This is the percentage fill level to which an RX queue will be refilled
+ * when the "RX refill threshold" is reached.
+ */
+static unsigned int rx_refill_limit = 95;
+
+/*
+ * RX maximum head room required.
+ *
+ * This must be at least 1 to prevent overflow and at least 2 to allow
+ * pipelined receives.
+ */
+#define EFX_RXD_HEAD_ROOM 2
+
+/* Macros for zero-order pages (potentially) containing multiple RX buffers */
+#define RX_DATA_OFFSET(_data)				\
+	(((unsigned long) (_data)) & (PAGE_SIZE-1))
+#define RX_BUF_OFFSET(_rx_buf)				\
+	RX_DATA_OFFSET((_rx_buf)->data)
+
+#define RX_PAGE_SIZE(_efx)				\
+	(PAGE_SIZE * (1u << (_efx)->rx_buffer_order))
+
+
+/**************************************************************************
+ *
+ * Linux generic LRO handling
+ *
+ **************************************************************************
+ */
+
+static int efx_lro_get_skb_hdr(struct sk_buff *skb, void **ip_hdr,
+			       void **tcpudp_hdr, u64 *hdr_flags, void *priv)
+{
+	struct efx_channel *channel = (struct efx_channel *)priv;
+	struct iphdr *iph;
+	struct tcphdr *th;
+
+	iph = (struct iphdr *)skb->data;
+	if (skb->protocol != htons(ETH_P_IP) || iph->protocol != IPPROTO_TCP)
+		goto fail;
+
+	th = (struct tcphdr *)(skb->data + iph->ihl * 4);
+
+	*tcpudp_hdr = th;
+	*ip_hdr = iph;
+	*hdr_flags = LRO_IPV4 | LRO_TCP;
+
+	channel->rx_alloc_level += RX_ALLOC_FACTOR_LRO;
+	return 0;
+fail:
+	channel->rx_alloc_level += RX_ALLOC_FACTOR_SKB;
+	return -1;
+}
+
+static int efx_get_frag_hdr(struct skb_frag_struct *frag, void **mac_hdr,
+			    void **ip_hdr, void **tcpudp_hdr, u64 *hdr_flags,
+			    void *priv)
+{
+	struct efx_channel *channel = (struct efx_channel *)priv;
+	struct ethhdr *eh;
+	struct iphdr *iph;
+
+	/* We support EtherII and VLAN encapsulated IPv4 */
+	eh = (struct ethhdr *)(page_address(frag->page) + frag->page_offset);
+	*mac_hdr = eh;
+
+	if (eh->h_proto == htons(ETH_P_IP)) {
+		iph = (struct iphdr *)(eh + 1);
+	} else {
+		struct vlan_ethhdr *veh = (struct vlan_ethhdr *)eh;
+		if (veh->h_vlan_encapsulated_proto != htons(ETH_P_IP))
+			goto fail;
+
+		iph = (struct iphdr *)(veh + 1);
+	}
+	*ip_hdr = iph;
+
+	/* We can only do LRO over TCP */
+	if (iph->protocol != IPPROTO_TCP)
+		goto fail;
+
+	*hdr_flags = LRO_IPV4 | LRO_TCP;
+	*tcpudp_hdr = (struct tcphdr *)((u8 *) iph + iph->ihl * 4);
+
+	channel->rx_alloc_level += RX_ALLOC_FACTOR_LRO;
+	return 0;
+ fail:
+	channel->rx_alloc_level += RX_ALLOC_FACTOR_SKB;
+	return -1;
+}
+
+int efx_lro_init(struct net_lro_mgr *lro_mgr, struct efx_nic *efx)
+{
+	size_t s = sizeof(struct net_lro_desc) * EFX_MAX_LRO_DESCRIPTORS;
+	struct net_lro_desc *lro_arr;
+
+	/* Allocate the LRO descriptors structure */
+	lro_arr = kzalloc(s, GFP_KERNEL);
+	if (lro_arr == NULL)
+		return -ENOMEM;
+
+	lro_mgr->lro_arr = lro_arr;
+	lro_mgr->max_desc = EFX_MAX_LRO_DESCRIPTORS;
+	lro_mgr->max_aggr = EFX_MAX_LRO_AGGR;
+	lro_mgr->frag_align_pad = EFX_PAGE_SKB_ALIGN;
+
+	lro_mgr->get_skb_header = efx_lro_get_skb_hdr;
+	lro_mgr->get_frag_header = efx_get_frag_hdr;
+	lro_mgr->dev = efx->net_dev;
+
+	lro_mgr->features = LRO_F_NAPI;
+
+	/* We can pass packets up with the checksum intact */
+	lro_mgr->ip_summed = CHECKSUM_UNNECESSARY;
+
+	lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY;
+
+	return 0;
+}
+
+void efx_lro_fini(struct net_lro_mgr *lro_mgr)
+{
+	kfree(lro_mgr->lro_arr);
+	lro_mgr->lro_arr = NULL;
+}
+
+/**
+ * efx_init_rx_buffer_skb - create new RX buffer using skb-based allocation
+ *
+ * @rx_queue:		Efx RX queue
+ * @rx_buf:		RX buffer structure to populate
+ *
+ * This allocates memory for a new receive buffer, maps it for DMA,
+ * and populates a struct efx_rx_buffer with the relevant
+ * information.  Return a negative error code or 0 on success.
+ */
+static inline int efx_init_rx_buffer_skb(struct efx_rx_queue *rx_queue,
+					 struct efx_rx_buffer *rx_buf)
+{
+	struct efx_nic *efx = rx_queue->efx;
+	struct net_device *net_dev = efx->net_dev;
+	int skb_len = efx->rx_buffer_len;
+
+	rx_buf->skb = netdev_alloc_skb(net_dev, skb_len);
+	if (unlikely(!rx_buf->skb))
+		return -ENOMEM;
+
+	/* Adjust the SKB for padding and checksum */
+	skb_reserve(rx_buf->skb, NET_IP_ALIGN);
+	rx_buf->len = skb_len - NET_IP_ALIGN;
+	rx_buf->data = (char *)rx_buf->skb->data;
+	rx_buf->skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+	rx_buf->dma_addr = pci_map_single(efx->pci_dev,
+					  rx_buf->data, rx_buf->len,
+					  PCI_DMA_FROMDEVICE);
+
+	if (unlikely(pci_dma_mapping_error(rx_buf->dma_addr))) {
+		dev_kfree_skb_any(rx_buf->skb);
+		rx_buf->skb = NULL;
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/**
+ * efx_init_rx_buffer_page - create new RX buffer using page-based allocation
+ *
+ * @rx_queue:		Efx RX queue
+ * @rx_buf:		RX buffer structure to populate
+ *
+ * This allocates memory for a new receive buffer, maps it for DMA,
+ * and populates a struct efx_rx_buffer with the relevant
+ * information.  Return a negative error code or 0 on success.
+ */
+static inline int efx_init_rx_buffer_page(struct efx_rx_queue *rx_queue,
+					  struct efx_rx_buffer *rx_buf)
+{
+	struct efx_nic *efx = rx_queue->efx;
+	int bytes, space, offset;
+
+	bytes = efx->rx_buffer_len - EFX_PAGE_IP_ALIGN;
+
+	/* If there is space left in the previously allocated page,
+	 * then use it. Otherwise allocate a new one */
+	rx_buf->page = rx_queue->buf_page;
+	if (rx_buf->page == NULL) {
+		dma_addr_t dma_addr;
+
+		rx_buf->page = alloc_pages(__GFP_COLD | __GFP_COMP | GFP_ATOMIC,
+					   efx->rx_buffer_order);
+		if (unlikely(rx_buf->page == NULL))
+			return -ENOMEM;
+
+		dma_addr = pci_map_page(efx->pci_dev, rx_buf->page,
+					0, RX_PAGE_SIZE(efx),
+					PCI_DMA_FROMDEVICE);
+
+		if (unlikely(pci_dma_mapping_error(dma_addr))) {
+			__free_pages(rx_buf->page, efx->rx_buffer_order);
+			rx_buf->page = NULL;
+			return -EIO;
+		}
+
+		rx_queue->buf_page = rx_buf->page;
+		rx_queue->buf_dma_addr = dma_addr;
+		rx_queue->buf_data = ((char *) page_address(rx_buf->page) +
+				      EFX_PAGE_IP_ALIGN);
+	}
+
+	offset = RX_DATA_OFFSET(rx_queue->buf_data);
+	rx_buf->len = bytes;
+	rx_buf->dma_addr = rx_queue->buf_dma_addr + offset;
+	rx_buf->data = rx_queue->buf_data;
+
+	/* Try to pack multiple buffers per page */
+	if (efx->rx_buffer_order == 0) {
+		/* The next buffer starts on the next 512 byte boundary */
+		rx_queue->buf_data += ((bytes + 0x1ff) & ~0x1ff);
+		offset += ((bytes + 0x1ff) & ~0x1ff);
+
+		space = RX_PAGE_SIZE(efx) - offset;
+		if (space >= bytes) {
+			/* Refs dropped on kernel releasing each skb */
+			get_page(rx_queue->buf_page);
+			goto out;
+		}
+	}
+
+	/* This is the final RX buffer for this page, so mark it for
+	 * unmapping */
+	rx_queue->buf_page = NULL;
+	rx_buf->unmap_addr = rx_queue->buf_dma_addr;
+
+ out:
+	return 0;
+}
+
+/* This allocates memory for a new receive buffer, maps it for DMA,
+ * and populates a struct efx_rx_buffer with the relevant
+ * information.
+ */
+static inline int efx_init_rx_buffer(struct efx_rx_queue *rx_queue,
+				     struct efx_rx_buffer *new_rx_buf)
+{
+	int rc = 0;
+
+	if (rx_queue->channel->rx_alloc_push_pages) {
+		new_rx_buf->skb = NULL;
+		rc = efx_init_rx_buffer_page(rx_queue, new_rx_buf);
+		rx_queue->alloc_page_count++;
+	} else {
+		new_rx_buf->page = NULL;
+		rc = efx_init_rx_buffer_skb(rx_queue, new_rx_buf);
+		rx_queue->alloc_skb_count++;
+	}
+
+	if (unlikely(rc < 0))
+		EFX_LOG_RL(rx_queue->efx, "%s RXQ[%d] =%d\n", __func__,
+			   rx_queue->queue, rc);
+	return rc;
+}
+
+static inline void efx_unmap_rx_buffer(struct efx_nic *efx,
+				       struct efx_rx_buffer *rx_buf)
+{
+	if (rx_buf->page) {
+		EFX_BUG_ON_PARANOID(rx_buf->skb);
+		if (rx_buf->unmap_addr) {
+			pci_unmap_page(efx->pci_dev, rx_buf->unmap_addr,
+				       RX_PAGE_SIZE(efx), PCI_DMA_FROMDEVICE);
+			rx_buf->unmap_addr = 0;
+		}
+	} else if (likely(rx_buf->skb)) {
+		pci_unmap_single(efx->pci_dev, rx_buf->dma_addr,
+				 rx_buf->len, PCI_DMA_FROMDEVICE);
+	}
+}
+
+static inline void efx_free_rx_buffer(struct efx_nic *efx,
+				      struct efx_rx_buffer *rx_buf)
+{
+	if (rx_buf->page) {
+		__free_pages(rx_buf->page, efx->rx_buffer_order);
+		rx_buf->page = NULL;
+	} else if (likely(rx_buf->skb)) {
+		dev_kfree_skb_any(rx_buf->skb);
+		rx_buf->skb = NULL;
+	}
+}
+
+static inline void efx_fini_rx_buffer(struct efx_rx_queue *rx_queue,
+				      struct efx_rx_buffer *rx_buf)
+{
+	efx_unmap_rx_buffer(rx_queue->efx, rx_buf);
+	efx_free_rx_buffer(rx_queue->efx, rx_buf);
+}
+
+/**
+ * efx_fast_push_rx_descriptors - push new RX descriptors quickly
+ * @rx_queue:		RX descriptor queue
+ * @retry:              Recheck the fill level
+ * This will aim to fill the RX descriptor queue up to
+ * @rx_queue->@fast_fill_limit. If there is insufficient atomic
+ * memory to do so, the caller should retry.
+ */
+static int __efx_fast_push_rx_descriptors(struct efx_rx_queue *rx_queue,
+					  int retry)
+{
+	struct efx_rx_buffer *rx_buf;
+	unsigned fill_level, index;
+	int i, space, rc = 0;
+
+	/* Calculate current fill level.  Do this outside the lock,
+	 * because most of the time we'll end up not wanting to do the
+	 * fill anyway.
+	 */
+	fill_level = (rx_queue->added_count - rx_queue->removed_count);
+	EFX_BUG_ON_PARANOID(fill_level >
+			    rx_queue->efx->type->rxd_ring_mask + 1);
+
+	/* Don't fill if we don't need to */
+	if (fill_level >= rx_queue->fast_fill_trigger)
+		return 0;
+
+	/* Record minimum fill level */
+	if (unlikely(fill_level < rx_queue->min_fill))
+		if (fill_level)
+			rx_queue->min_fill = fill_level;
+
+	/* Acquire RX add lock.  If this lock is contended, then a fast
+	 * fill must already be in progress (e.g. in the refill
+	 * tasklet), so we don't need to do anything
+	 */
+	if (!spin_trylock_bh(&rx_queue->add_lock))
+		return -1;
+
+ retry:
+	/* Recalculate current fill level now that we have the lock */
+	fill_level = (rx_queue->added_count - rx_queue->removed_count);
+	EFX_BUG_ON_PARANOID(fill_level >
+			    rx_queue->efx->type->rxd_ring_mask + 1);
+	space = rx_queue->fast_fill_limit - fill_level;
+	if (space < EFX_RX_BATCH)
+		goto out_unlock;
+
+	EFX_TRACE(rx_queue->efx, "RX queue %d fast-filling descriptor ring from"
+		  " level %d to level %d using %s allocation\n",
+		  rx_queue->queue, fill_level, rx_queue->fast_fill_limit,
+		  rx_queue->channel->rx_alloc_push_pages ? "page" : "skb");
+
+	do {
+		for (i = 0; i < EFX_RX_BATCH; ++i) {
+			index = (rx_queue->added_count &
+				 rx_queue->efx->type->rxd_ring_mask);
+			rx_buf = efx_rx_buffer(rx_queue, index);
+			rc = efx_init_rx_buffer(rx_queue, rx_buf);
+			if (unlikely(rc))
+				goto out;
+			++rx_queue->added_count;
+		}
+	} while ((space -= EFX_RX_BATCH) >= EFX_RX_BATCH);
+
+	EFX_TRACE(rx_queue->efx, "RX queue %d fast-filled descriptor ring "
+		  "to level %d\n", rx_queue->queue,
+		  rx_queue->added_count - rx_queue->removed_count);
+
+ out:
+	/* Send write pointer to card. */
+	falcon_notify_rx_desc(rx_queue);
+
+	/* If the fast fill is running inside from the refill tasklet, then
+	 * for SMP systems it may be running on a different CPU to
+	 * RX event processing, which means that the fill level may now be
+	 * out of date. */
+	if (unlikely(retry && (rc == 0)))
+		goto retry;
+
+ out_unlock:
+	spin_unlock_bh(&rx_queue->add_lock);
+
+	return rc;
+}
+
+/**
+ * efx_fast_push_rx_descriptors - push new RX descriptors quickly
+ * @rx_queue:		RX descriptor queue
+ *
+ * This will aim to fill the RX descriptor queue up to
+ * @rx_queue->@fast_fill_limit.  If there is insufficient memory to do so,
+ * it will schedule a work item to immediately continue the fast fill
+ */
+void efx_fast_push_rx_descriptors(struct efx_rx_queue *rx_queue)
+{
+	int rc;
+
+	rc = __efx_fast_push_rx_descriptors(rx_queue, 0);
+	if (unlikely(rc)) {
+		/* Schedule the work item to run immediately. The hope is
+		 * that work is immediately pending to free some memory
+		 * (e.g. an RX event or TX completion)
+		 */
+		efx_schedule_slow_fill(rx_queue, 0);
+	}
+}
+
+void efx_rx_work(struct work_struct *data)
+{
+	struct efx_rx_queue *rx_queue;
+	int rc;
+
+	rx_queue = container_of(data, struct efx_rx_queue, work.work);
+
+	if (unlikely(!rx_queue->channel->enabled))
+		return;
+
+	EFX_TRACE(rx_queue->efx, "RX queue %d worker thread executing on CPU "
+		  "%d\n", rx_queue->queue, raw_smp_processor_id());
+
+	++rx_queue->slow_fill_count;
+	/* Push new RX descriptors, allowing at least 1 jiffy for
+	 * the kernel to free some more memory. */
+	rc = __efx_fast_push_rx_descriptors(rx_queue, 1);
+	if (rc)
+		efx_schedule_slow_fill(rx_queue, 1);
+}
+
+static inline void efx_rx_packet__check_len(struct efx_rx_queue *rx_queue,
+					    struct efx_rx_buffer *rx_buf,
+					    int len, int *discard,
+					    int *leak_packet)
+{
+	struct efx_nic *efx = rx_queue->efx;
+	unsigned max_len = rx_buf->len - efx->type->rx_buffer_padding;
+
+	if (likely(len <= max_len))
+		return;
+
+	/* The packet must be discarded, but this is only a fatal error
+	 * if the caller indicated it was
+	 */
+	*discard = 1;
+
+	if ((len > rx_buf->len) && EFX_WORKAROUND_8071(efx)) {
+		EFX_ERR_RL(efx, " RX queue %d seriously overlength "
+			   "RX event (0x%x > 0x%x+0x%x). Leaking\n",
+			   rx_queue->queue, len, max_len,
+			   efx->type->rx_buffer_padding);
+		/* If this buffer was skb-allocated, then the meta
+		 * data at the end of the skb will be trashed. So
+		 * we have no choice but to leak the fragment.
+		 */
+		*leak_packet = (rx_buf->skb != NULL);
+		efx_schedule_reset(efx, RESET_TYPE_RX_RECOVERY);
+	} else {
+		EFX_ERR_RL(efx, " RX queue %d overlength RX event "
+			   "(0x%x > 0x%x)\n", rx_queue->queue, len, max_len);
+	}
+
+	rx_queue->channel->n_rx_overlength++;
+}
+
+/* Pass a received packet up through the generic LRO stack
+ *
+ * Handles driverlink veto, and passes the fragment up via
+ * the appropriate LRO method
+ */
+static inline void efx_rx_packet_lro(struct efx_channel *channel,
+				     struct efx_rx_buffer *rx_buf)
+{
+	struct net_lro_mgr *lro_mgr = &channel->lro_mgr;
+	void *priv = channel;
+
+	/* Pass the skb/page into the LRO engine */
+	if (rx_buf->page) {
+		struct skb_frag_struct frags;
+
+		frags.page = rx_buf->page;
+		frags.page_offset = RX_BUF_OFFSET(rx_buf);
+		frags.size = rx_buf->len;
+
+		lro_receive_frags(lro_mgr, &frags, rx_buf->len,
+				  rx_buf->len, priv, 0);
+
+		EFX_BUG_ON_PARANOID(rx_buf->skb);
+		rx_buf->page = NULL;
+	} else {
+		EFX_BUG_ON_PARANOID(!rx_buf->skb);
+
+		lro_receive_skb(lro_mgr, rx_buf->skb, priv);
+		rx_buf->skb = NULL;
+	}
+}
+
+/* Allocate and construct an SKB around a struct page.*/
+static inline struct sk_buff *efx_rx_mk_skb(struct efx_rx_buffer *rx_buf,
+					    struct efx_nic *efx,
+					    int hdr_len)
+{
+	struct sk_buff *skb;
+
+	/* Allocate an SKB to store the headers */
+	skb = netdev_alloc_skb(efx->net_dev, hdr_len + EFX_PAGE_SKB_ALIGN);
+	if (unlikely(skb == NULL)) {
+		EFX_ERR_RL(efx, "RX out of memory for skb\n");
+		return NULL;
+	}
+
+	EFX_BUG_ON_PARANOID(skb_shinfo(skb)->nr_frags);
+	EFX_BUG_ON_PARANOID(rx_buf->len < hdr_len);
+
+	skb->ip_summed = CHECKSUM_UNNECESSARY;
+	skb_reserve(skb, EFX_PAGE_SKB_ALIGN);
+
+	skb->len = rx_buf->len;
+	skb->truesize = rx_buf->len + sizeof(struct sk_buff);
+	memcpy(skb->data, rx_buf->data, hdr_len);
+	skb->tail += hdr_len;
+
+	/* Append the remaining page onto the frag list */
+	if (unlikely(rx_buf->len > hdr_len)) {
+		struct skb_frag_struct *frag = skb_shinfo(skb)->frags;
+		frag->page = rx_buf->page;
+		frag->page_offset = RX_BUF_OFFSET(rx_buf) + hdr_len;
+		frag->size = skb->len - hdr_len;
+		skb_shinfo(skb)->nr_frags = 1;
+		skb->data_len = frag->size;
+	} else {
+		__free_pages(rx_buf->page, efx->rx_buffer_order);
+		skb->data_len = 0;
+	}
+
+	/* Ownership has transferred from the rx_buf to skb */
+	rx_buf->page = NULL;
+
+	/* Move past the ethernet header */
+	skb->protocol = eth_type_trans(skb, efx->net_dev);
+
+	return skb;
+}
+
+void efx_rx_packet(struct efx_rx_queue *rx_queue, unsigned int index,
+		   unsigned int len, int checksummed, int discard)
+{
+	struct efx_nic *efx = rx_queue->efx;
+	struct efx_rx_buffer *rx_buf;
+	int leak_packet = 0;
+
+	rx_buf = efx_rx_buffer(rx_queue, index);
+	EFX_BUG_ON_PARANOID(!rx_buf->data);
+	EFX_BUG_ON_PARANOID(rx_buf->skb && rx_buf->page);
+	EFX_BUG_ON_PARANOID(!(rx_buf->skb || rx_buf->page));
+
+	/* This allows the refill path to post another buffer.
+	 * EFX_RXD_HEAD_ROOM ensures that the slot we are using
+	 * isn't overwritten yet.
+	 */
+	rx_queue->removed_count++;
+
+	/* Validate the length encoded in the event vs the descriptor pushed */
+	efx_rx_packet__check_len(rx_queue, rx_buf, len,
+				 &discard, &leak_packet);
+
+	EFX_TRACE(efx, "RX queue %d received id %x at %llx+%x %s%s\n",
+		  rx_queue->queue, index,
+		  (unsigned long long)rx_buf->dma_addr, len,
+		  (checksummed ? " [SUMMED]" : ""),
+		  (discard ? " [DISCARD]" : ""));
+
+	/* Discard packet, if instructed to do so */
+	if (unlikely(discard)) {
+		if (unlikely(leak_packet))
+			rx_queue->channel->n_skbuff_leaks++;
+		else
+			/* We haven't called efx_unmap_rx_buffer yet,
+			 * so fini the entire rx_buffer here */
+			efx_fini_rx_buffer(rx_queue, rx_buf);
+		return;
+	}
+
+	/* Release card resources - assumes all RX buffers consumed in-order
+	 * per RX queue
+	 */
+	efx_unmap_rx_buffer(efx, rx_buf);
+
+	/* Prefetch nice and early so data will (hopefully) be in cache by
+	 * the time we look at it.
+	 */
+	prefetch(rx_buf->data);
+
+	/* Pipeline receives so that we give time for packet headers to be
+	 * prefetched into cache.
+	 */
+	rx_buf->len = len;
+	if (rx_queue->channel->rx_pkt)
+		__efx_rx_packet(rx_queue->channel,
+				rx_queue->channel->rx_pkt,
+				rx_queue->channel->rx_pkt_csummed);
+	rx_queue->channel->rx_pkt = rx_buf;
+	rx_queue->channel->rx_pkt_csummed = checksummed;
+}
+
+/* Handle a received packet.  Second half: Touches packet payload. */
+void __efx_rx_packet(struct efx_channel *channel,
+		     struct efx_rx_buffer *rx_buf, int checksummed)
+{
+	struct efx_nic *efx = channel->efx;
+	struct sk_buff *skb;
+	int lro = efx->net_dev->features & NETIF_F_LRO;
+
+	if (rx_buf->skb) {
+		prefetch(skb_shinfo(rx_buf->skb));
+
+		skb_put(rx_buf->skb, rx_buf->len);
+
+		/* Move past the ethernet header. rx_buf->data still points
+		 * at the ethernet header */
+		rx_buf->skb->protocol = eth_type_trans(rx_buf->skb,
+						       efx->net_dev);
+	}
+
+	/* Both our generic-LRO and SFC-SSR support skb and page based
+	 * allocation, but neither support switching from one to the
+	 * other on the fly. If we spot that the allocation mode has
+	 * changed, then flush the LRO state.
+	 */
+	if (unlikely(channel->rx_alloc_pop_pages != (rx_buf->page != NULL))) {
+		efx_flush_lro(channel);
+		channel->rx_alloc_pop_pages = (rx_buf->page != NULL);
+	}
+	if (likely(checksummed && lro)) {
+		efx_rx_packet_lro(channel, rx_buf);
+		goto done;
+	}
+
+	/* Form an skb if required */
+	if (rx_buf->page) {
+		int hdr_len = min(rx_buf->len, EFX_SKB_HEADERS);
+		skb = efx_rx_mk_skb(rx_buf, efx, hdr_len);
+		if (unlikely(skb == NULL)) {
+			efx_free_rx_buffer(efx, rx_buf);
+			goto done;
+		}
+	} else {
+		/* We now own the SKB */
+		skb = rx_buf->skb;
+		rx_buf->skb = NULL;
+	}
+
+	EFX_BUG_ON_PARANOID(rx_buf->page);
+	EFX_BUG_ON_PARANOID(rx_buf->skb);
+	EFX_BUG_ON_PARANOID(!skb);
+
+	/* Set the SKB flags */
+	if (unlikely(!checksummed || !efx->rx_checksum_enabled))
+		skb->ip_summed = CHECKSUM_NONE;
+
+	/* Pass the packet up */
+	netif_receive_skb(skb);
+
+	/* Update allocation strategy method */
+	channel->rx_alloc_level += RX_ALLOC_FACTOR_SKB;
+
+	/* fall-thru */
+done:
+	efx->net_dev->last_rx = jiffies;
+}
+
+void efx_rx_strategy(struct efx_channel *channel)
+{
+	enum efx_rx_alloc_method method = rx_alloc_method;
+
+	/* Only makes sense to use page based allocation if LRO is enabled */
+	if (!(channel->efx->net_dev->features & NETIF_F_LRO)) {
+		method = RX_ALLOC_METHOD_SKB;
+	} else if (method == RX_ALLOC_METHOD_AUTO) {
+		/* Constrain the rx_alloc_level */
+		if (channel->rx_alloc_level < 0)
+			channel->rx_alloc_level = 0;
+		else if (channel->rx_alloc_level > RX_ALLOC_LEVEL_MAX)
+			channel->rx_alloc_level = RX_ALLOC_LEVEL_MAX;
+
+		/* Decide on the allocation method */
+		method = ((channel->rx_alloc_level > RX_ALLOC_LEVEL_LRO) ?
+			  RX_ALLOC_METHOD_PAGE : RX_ALLOC_METHOD_SKB);
+	}
+
+	/* Push the option */
+	channel->rx_alloc_push_pages = (method == RX_ALLOC_METHOD_PAGE);
+}
+
+int efx_probe_rx_queue(struct efx_rx_queue *rx_queue)
+{
+	struct efx_nic *efx = rx_queue->efx;
+	unsigned int rxq_size;
+	int rc;
+
+	EFX_LOG(efx, "creating RX queue %d\n", rx_queue->queue);
+
+	/* Allocate RX buffers */
+	rxq_size = (efx->type->rxd_ring_mask + 1) * sizeof(*rx_queue->buffer);
+	rx_queue->buffer = kzalloc(rxq_size, GFP_KERNEL);
+	if (!rx_queue->buffer) {
+		rc = -ENOMEM;
+		goto fail1;
+	}
+
+	rc = falcon_probe_rx(rx_queue);
+	if (rc)
+		goto fail2;
+
+	return 0;
+
+ fail2:
+	kfree(rx_queue->buffer);
+	rx_queue->buffer = NULL;
+ fail1:
+	rx_queue->used = 0;
+
+	return rc;
+}
+
+int efx_init_rx_queue(struct efx_rx_queue *rx_queue)
+{
+	struct efx_nic *efx = rx_queue->efx;
+	unsigned int max_fill, trigger, limit;
+
+	EFX_LOG(rx_queue->efx, "initialising RX queue %d\n", rx_queue->queue);
+
+	/* Initialise ptr fields */
+	rx_queue->added_count = 0;
+	rx_queue->notified_count = 0;
+	rx_queue->removed_count = 0;
+	rx_queue->min_fill = -1U;
+	rx_queue->min_overfill = -1U;
+
+	/* Initialise limit fields */
+	max_fill = efx->type->rxd_ring_mask + 1 - EFX_RXD_HEAD_ROOM;
+	trigger = max_fill * min(rx_refill_threshold, 100U) / 100U;
+	limit = max_fill * min(rx_refill_limit, 100U) / 100U;
+
+	rx_queue->max_fill = max_fill;
+	rx_queue->fast_fill_trigger = trigger;
+	rx_queue->fast_fill_limit = limit;
+
+	/* Set up RX descriptor ring */
+	return falcon_init_rx(rx_queue);
+}
+
+void efx_fini_rx_queue(struct efx_rx_queue *rx_queue)
+{
+	int i;
+	struct efx_rx_buffer *rx_buf;
+
+	EFX_LOG(rx_queue->efx, "shutting down RX queue %d\n", rx_queue->queue);
+
+	falcon_fini_rx(rx_queue);
+
+	/* Release RX buffers NB start at index 0 not current HW ptr */
+	if (rx_queue->buffer) {
+		for (i = 0; i <= rx_queue->efx->type->rxd_ring_mask; i++) {
+			rx_buf = efx_rx_buffer(rx_queue, i);
+			efx_fini_rx_buffer(rx_queue, rx_buf);
+		}
+	}
+
+	/* For a page that is part-way through splitting into RX buffers */
+	if (rx_queue->buf_page != NULL) {
+		pci_unmap_page(rx_queue->efx->pci_dev, rx_queue->buf_dma_addr,
+			       RX_PAGE_SIZE(rx_queue->efx), PCI_DMA_FROMDEVICE);
+		__free_pages(rx_queue->buf_page,
+			     rx_queue->efx->rx_buffer_order);
+		rx_queue->buf_page = NULL;
+	}
+}
+
+void efx_remove_rx_queue(struct efx_rx_queue *rx_queue)
+{
+	EFX_LOG(rx_queue->efx, "destroying RX queue %d\n", rx_queue->queue);
+
+	falcon_remove_rx(rx_queue);
+
+	kfree(rx_queue->buffer);
+	rx_queue->buffer = NULL;
+	rx_queue->used = 0;
+}
+
+void efx_flush_lro(struct efx_channel *channel)
+{
+	lro_flush_all(&channel->lro_mgr);
+}
+
+
+module_param(rx_alloc_method, int, 0644);
+MODULE_PARM_DESC(rx_alloc_method, "Allocation method used for RX buffers");
+
+module_param(rx_refill_threshold, uint, 0444);
+MODULE_PARM_DESC(rx_refill_threshold,
+		 "RX descriptor ring fast/slow fill threshold (%)");
+
diff --git a/drivers/net/sfc/rx.h b/drivers/net/sfc/rx.h
new file mode 100644
index 0000000..f35e377
--- /dev/null
+++ b/drivers/net/sfc/rx.h
@@ -0,0 +1,29 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2006 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_RX_H
+#define EFX_RX_H
+
+#include "net_driver.h"
+
+int efx_probe_rx_queue(struct efx_rx_queue *rx_queue);
+void efx_remove_rx_queue(struct efx_rx_queue *rx_queue);
+int efx_init_rx_queue(struct efx_rx_queue *rx_queue);
+void efx_fini_rx_queue(struct efx_rx_queue *rx_queue);
+
+int efx_lro_init(struct net_lro_mgr *lro_mgr, struct efx_nic *efx);
+void efx_lro_fini(struct net_lro_mgr *lro_mgr);
+void efx_flush_lro(struct efx_channel *channel);
+void efx_rx_strategy(struct efx_channel *channel);
+void efx_fast_push_rx_descriptors(struct efx_rx_queue *rx_queue);
+void efx_rx_work(struct work_struct *data);
+void __efx_rx_packet(struct efx_channel *channel,
+		     struct efx_rx_buffer *rx_buf, int checksummed);
+
+#endif /* EFX_RX_H */
diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c
new file mode 100644
index 0000000..11fa9fb
--- /dev/null
+++ b/drivers/net/sfc/sfe4001.c
@@ -0,0 +1,252 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2007 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+/*****************************************************************************
+ * Support for the SFE4001 NIC: driver code for the PCA9539 I/O expander that
+ * controls the PHY power rails, and for the MAX6647 temp. sensor used to check
+ * the PHY
+ */
+#include <linux/delay.h>
+#include "efx.h"
+#include "phy.h"
+#include "boards.h"
+#include "falcon.h"
+#include "falcon_hwdefs.h"
+#include "mac.h"
+
+/**************************************************************************
+ *
+ * I2C IO Expander device
+ *
+ **************************************************************************/
+#define	PCA9539 0x74
+
+#define	P0_IN 0x00
+#define	P0_OUT 0x02
+#define	P0_INVERT 0x04
+#define	P0_CONFIG 0x06
+
+#define	P0_EN_1V0X_LBN 0
+#define	P0_EN_1V0X_WIDTH 1
+#define	P0_EN_1V2_LBN 1
+#define	P0_EN_1V2_WIDTH 1
+#define	P0_EN_2V5_LBN 2
+#define	P0_EN_2V5_WIDTH 1
+#define	P0_EN_3V3X_LBN 3
+#define	P0_EN_3V3X_WIDTH 1
+#define	P0_EN_5V_LBN 4
+#define	P0_EN_5V_WIDTH 1
+#define	P0_SHORTEN_JTAG_LBN 5
+#define	P0_SHORTEN_JTAG_WIDTH 1
+#define	P0_X_TRST_LBN 6
+#define	P0_X_TRST_WIDTH 1
+#define	P0_DSP_RESET_LBN 7
+#define	P0_DSP_RESET_WIDTH 1
+
+#define	P1_IN 0x01
+#define	P1_OUT 0x03
+#define	P1_INVERT 0x05
+#define	P1_CONFIG 0x07
+
+#define	P1_AFE_PWD_LBN 0
+#define	P1_AFE_PWD_WIDTH 1
+#define	P1_DSP_PWD25_LBN 1
+#define	P1_DSP_PWD25_WIDTH 1
+#define	P1_RESERVED_LBN 2
+#define	P1_RESERVED_WIDTH 2
+#define	P1_SPARE_LBN 4
+#define	P1_SPARE_WIDTH 4
+
+
+/**************************************************************************
+ *
+ * Temperature Sensor
+ *
+ **************************************************************************/
+#define	MAX6647	0x4e
+
+#define	RLTS	0x00
+#define	RLTE	0x01
+#define	RSL	0x02
+#define	RCL	0x03
+#define	RCRA	0x04
+#define	RLHN	0x05
+#define	RLLI	0x06
+#define	RRHI	0x07
+#define	RRLS	0x08
+#define	WCRW	0x0a
+#define	WLHO	0x0b
+#define	WRHA	0x0c
+#define	WRLN	0x0e
+#define	OSHT	0x0f
+#define	REET	0x10
+#define	RIET	0x11
+#define	RWOE	0x19
+#define	RWOI	0x20
+#define	HYS	0x21
+#define	QUEUE	0x22
+#define	MFID	0xfe
+#define	REVID	0xff
+
+/* Status bits */
+#define MAX6647_BUSY	(1 << 7)	/* ADC is converting */
+#define MAX6647_LHIGH	(1 << 6)	/* Local high temp. alarm */
+#define MAX6647_LLOW	(1 << 5)	/* Local low temp. alarm */
+#define MAX6647_RHIGH	(1 << 4)	/* Remote high temp. alarm */
+#define MAX6647_RLOW	(1 << 3)	/* Remote low temp. alarm */
+#define MAX6647_FAULT	(1 << 2)	/* DXN/DXP short/open circuit */
+#define MAX6647_EOT	(1 << 1)	/* Remote junction overtemp. */
+#define MAX6647_IOT	(1 << 0)	/* Local junction overtemp. */
+
+static const u8 xgphy_max_temperature = 90;
+
+void sfe4001_poweroff(struct efx_nic *efx)
+{
+	struct efx_i2c_interface *i2c = &efx->i2c;
+
+	u8 cfg, out, in;
+
+	EFX_INFO(efx, "%s\n", __func__);
+
+	/* Turn off all power rails */
+	out = 0xff;
+	(void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
+
+	/* Disable port 1 outputs on IO expander */
+	cfg = 0xff;
+	(void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1);
+
+	/* Disable port 0 outputs on IO expander */
+	cfg = 0xff;
+	(void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1);
+
+	/* Clear any over-temperature alert */
+	(void) efx_i2c_read(i2c, MAX6647, RSL, &in, 1);
+}
+
+/* This board uses an I2C expander to provider power to the PHY, which needs to
+ * be turned on before the PHY can be used.
+ * Context: Process context, rtnl lock held
+ */
+int sfe4001_poweron(struct efx_nic *efx)
+{
+	struct efx_i2c_interface *i2c = &efx->i2c;
+	unsigned int count;
+	int rc;
+	u8 out, in, cfg;
+	efx_dword_t reg;
+
+	/* 10Xpress has fixed-function LED pins, so there is no board-specific
+	 * blink code. */
+	efx->board_info.blink = tenxpress_phy_blink;
+
+	/* Ensure that XGXS and XAUI SerDes are held in reset */
+	EFX_POPULATE_DWORD_7(reg, XX_PWRDNA_EN, 1,
+			     XX_PWRDNB_EN, 1,
+			     XX_RSTPLLAB_EN, 1,
+			     XX_RESETA_EN, 1,
+			     XX_RESETB_EN, 1,
+			     XX_RSTXGXSRX_EN, 1,
+			     XX_RSTXGXSTX_EN, 1);
+	falcon_xmac_writel(efx, &reg, XX_PWR_RST_REG_MAC);
+	udelay(10);
+
+	/* Set DSP over-temperature alert threshold */
+	EFX_INFO(efx, "DSP cut-out at %dC\n", xgphy_max_temperature);
+	rc = efx_i2c_write(i2c, MAX6647, WLHO,
+			   &xgphy_max_temperature, 1);
+	if (rc)
+		goto fail1;
+
+	/* Read it back and verify */
+	rc = efx_i2c_read(i2c, MAX6647, RLHN, &in, 1);
+	if (rc)
+		goto fail1;
+	if (in != xgphy_max_temperature) {
+		rc = -EFAULT;
+		goto fail1;
+	}
+
+	/* Clear any previous over-temperature alert */
+	rc = efx_i2c_read(i2c, MAX6647, RSL, &in, 1);
+	if (rc)
+		goto fail1;
+
+	/* Enable port 0 and port 1 outputs on IO expander */
+	cfg = 0x00;
+	rc = efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1);
+	if (rc)
+		goto fail1;
+	cfg = 0xff & ~(1 << P1_SPARE_LBN);
+	rc = efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1);
+	if (rc)
+		goto fail2;
+
+	/* Turn all power off then wait 1 sec. This ensures PHY is reset */
+	out = 0xff & ~((0 << P0_EN_1V2_LBN) | (0 << P0_EN_2V5_LBN) |
+		       (0 << P0_EN_3V3X_LBN) | (0 << P0_EN_5V_LBN) |
+		       (0 << P0_EN_1V0X_LBN));
+	rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
+	if (rc)
+		goto fail3;
+
+	schedule_timeout_uninterruptible(HZ);
+	count = 0;
+	do {
+		/* Turn on 1.2V, 2.5V, 3.3V and 5V power rails */
+		out = 0xff & ~((1 << P0_EN_1V2_LBN) | (1 << P0_EN_2V5_LBN) |
+			       (1 << P0_EN_3V3X_LBN) | (1 << P0_EN_5V_LBN) |
+			       (1 << P0_X_TRST_LBN));
+
+		rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
+		if (rc)
+			goto fail3;
+		msleep(10);
+
+		/* Turn on 1V power rail */
+		out &= ~(1 << P0_EN_1V0X_LBN);
+		rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
+		if (rc)
+			goto fail3;
+
+		EFX_INFO(efx, "waiting for power (attempt %d)...\n", count);
+
+		schedule_timeout_uninterruptible(HZ);
+
+		/* Check DSP is powered */
+		rc = efx_i2c_read(i2c, PCA9539, P1_IN, &in, 1);
+		if (rc)
+			goto fail3;
+		if (in & (1 << P1_AFE_PWD_LBN))
+			goto done;
+
+	} while (++count < 20);
+
+	EFX_INFO(efx, "timed out waiting for power\n");
+	rc = -ETIMEDOUT;
+	goto fail3;
+
+done:
+	EFX_INFO(efx, "PHY is powered on\n");
+	return 0;
+
+fail3:
+	/* Turn off all power rails */
+	out = 0xff;
+	(void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
+	/* Disable port 1 outputs on IO expander */
+	out = 0xff;
+	(void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1);
+fail2:
+	/* Disable port 0 outputs on IO expander */
+	out = 0xff;
+	(void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1);
+fail1:
+	return rc;
+}
diff --git a/drivers/net/sfc/spi.h b/drivers/net/sfc/spi.h
new file mode 100644
index 0000000..34412f3
--- /dev/null
+++ b/drivers/net/sfc/spi.h
@@ -0,0 +1,71 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005 Fen Systems Ltd.
+ * Copyright 2006 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_SPI_H
+#define EFX_SPI_H
+
+#include "net_driver.h"
+
+/**************************************************************************
+ *
+ * Basic SPI command set and bit definitions
+ *
+ *************************************************************************/
+
+/*
+ * Commands common to all known devices.
+ *
+ */
+
+/* Write status register */
+#define SPI_WRSR 0x01
+
+/* Write data to memory array */
+#define SPI_WRITE 0x02
+
+/* Read data from memory array */
+#define SPI_READ 0x03
+
+/* Reset write enable latch */
+#define SPI_WRDI 0x04
+
+/* Read status register */
+#define SPI_RDSR 0x05
+
+/* Set write enable latch */
+#define SPI_WREN 0x06
+
+/* SST: Enable write to status register */
+#define SPI_SST_EWSR 0x50
+
+/*
+ * Status register bits.  Not all bits are supported on all devices.
+ *
+ */
+
+/* Write-protect pin enabled */
+#define SPI_STATUS_WPEN 0x80
+
+/* Block protection bit 2 */
+#define SPI_STATUS_BP2 0x10
+
+/* Block protection bit 1 */
+#define SPI_STATUS_BP1 0x08
+
+/* Block protection bit 0 */
+#define SPI_STATUS_BP0 0x04
+
+/* State of the write enable latch */
+#define SPI_STATUS_WEN 0x02
+
+/* Device busy flag */
+#define SPI_STATUS_NRDY 0x01
+
+#endif /* EFX_SPI_H */
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
new file mode 100644
index 0000000..a2e9f79
--- /dev/null
+++ b/drivers/net/sfc/tenxpress.c
@@ -0,0 +1,434 @@
+/****************************************************************************
+ * Driver for Solarflare 802.3an compliant PHY
+ * Copyright 2007 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include "efx.h"
+#include "gmii.h"
+#include "mdio_10g.h"
+#include "falcon.h"
+#include "phy.h"
+#include "falcon_hwdefs.h"
+#include "boards.h"
+#include "mac.h"
+
+/* We expect these MMDs to be in the package */
+/* AN not here as mdio_check_mmds() requires STAT2 support */
+#define TENXPRESS_REQUIRED_DEVS (MDIO_MMDREG_DEVS0_PMAPMD | \
+				 MDIO_MMDREG_DEVS0_PCS    | \
+				 MDIO_MMDREG_DEVS0_PHYXS)
+
+/* We complain if we fail to see the link partner as 10G capable this many
+ * times in a row (must be > 1 as sampling the autoneg. registers is racy)
+ */
+#define MAX_BAD_LP_TRIES	(5)
+
+/* Extended control register */
+#define	PMA_PMD_XCONTROL_REG 0xc000
+#define	PMA_PMD_LNPGA_POWERDOWN_LBN 8
+#define	PMA_PMD_LNPGA_POWERDOWN_WIDTH 1
+
+/* extended status register */
+#define PMA_PMD_XSTATUS_REG 0xc001
+#define PMA_PMD_XSTAT_FLP_LBN   (12)
+
+/* LED control register */
+#define PMA_PMD_LED_CTRL_REG	(0xc007)
+#define PMA_PMA_LED_ACTIVITY_LBN	(3)
+
+/* LED function override register */
+#define PMA_PMD_LED_OVERR_REG	(0xc009)
+/* Bit positions for different LEDs (there are more but not wired on SFE4001)*/
+#define PMA_PMD_LED_LINK_LBN	(0)
+#define PMA_PMD_LED_SPEED_LBN	(2)
+#define PMA_PMD_LED_TX_LBN	(4)
+#define PMA_PMD_LED_RX_LBN	(6)
+/* Override settings */
+#define	PMA_PMD_LED_AUTO	(0)	/* H/W control */
+#define	PMA_PMD_LED_ON		(1)
+#define	PMA_PMD_LED_OFF		(2)
+#define PMA_PMD_LED_FLASH	(3)
+/* All LEDs under hardware control */
+#define PMA_PMD_LED_FULL_AUTO	(0)
+/* Green and Amber under hardware control, Red off */
+#define PMA_PMD_LED_DEFAULT	(PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN)
+
+
+/* Self test (BIST) control register */
+#define PMA_PMD_BIST_CTRL_REG	(0xc014)
+#define PMA_PMD_BIST_BER_LBN	(2)	/* Run BER test */
+#define PMA_PMD_BIST_CONT_LBN	(1)	/* Run continuous BIST until cleared */
+#define PMA_PMD_BIST_SINGLE_LBN	(0)	/* Run 1 BIST iteration (self clears) */
+/* Self test status register */
+#define PMA_PMD_BIST_STAT_REG	(0xc015)
+#define PMA_PMD_BIST_ENX_LBN	(3)
+#define PMA_PMD_BIST_PMA_LBN	(2)
+#define PMA_PMD_BIST_RXD_LBN	(1)
+#define PMA_PMD_BIST_AFE_LBN	(0)
+
+#define BIST_MAX_DELAY	(1000)
+#define BIST_POLL_DELAY	(10)
+
+/* Misc register defines */
+#define PCS_CLOCK_CTRL_REG 0xd801
+#define PLL312_RST_N_LBN 2
+
+#define PCS_SOFT_RST2_REG 0xd806
+#define SERDES_RST_N_LBN 13
+#define XGXS_RST_N_LBN 12
+
+#define	PCS_TEST_SELECT_REG 0xd807	/* PRM 10.5.8 */
+#define	CLK312_EN_LBN 3
+
+/* Boot status register */
+#define PCS_BOOT_STATUS_REG	(0xd000)
+#define PCS_BOOT_FATAL_ERR_LBN	(0)
+#define PCS_BOOT_PROGRESS_LBN	(1)
+#define PCS_BOOT_PROGRESS_WIDTH	(2)
+#define PCS_BOOT_COMPLETE_LBN	(3)
+#define PCS_BOOT_MAX_DELAY	(100)
+#define PCS_BOOT_POLL_DELAY	(10)
+
+/* Time to wait between powering down the LNPGA and turning off the power
+ * rails */
+#define LNPGA_PDOWN_WAIT	(HZ / 5)
+
+static int crc_error_reset_threshold = 100;
+module_param(crc_error_reset_threshold, int, 0644);
+MODULE_PARM_DESC(crc_error_reset_threshold,
+		 "Max number of CRC errors before XAUI reset");
+
+struct tenxpress_phy_data {
+	enum tenxpress_state state;
+	atomic_t bad_crc_count;
+	int bad_lp_tries;
+};
+
+static int tenxpress_state_is(struct efx_nic *efx, int state)
+{
+	struct tenxpress_phy_data *phy_data = efx->phy_data;
+	return (phy_data != NULL) && (state == phy_data->state);
+}
+
+void tenxpress_set_state(struct efx_nic *efx,
+				enum tenxpress_state state)
+{
+	struct tenxpress_phy_data *phy_data = efx->phy_data;
+	if (phy_data != NULL)
+		phy_data->state = state;
+}
+
+void tenxpress_crc_err(struct efx_nic *efx)
+{
+	struct tenxpress_phy_data *phy_data = efx->phy_data;
+	if (phy_data != NULL)
+		atomic_inc(&phy_data->bad_crc_count);
+}
+
+/* Check that the C166 has booted successfully */
+static int tenxpress_phy_check(struct efx_nic *efx)
+{
+	int phy_id = efx->mii.phy_id;
+	int count = PCS_BOOT_MAX_DELAY / PCS_BOOT_POLL_DELAY;
+	int boot_stat;
+
+	/* Wait for the boot to complete (or not) */
+	while (count) {
+		boot_stat = mdio_clause45_read(efx, phy_id,
+					       MDIO_MMD_PCS,
+					       PCS_BOOT_STATUS_REG);
+		if (boot_stat & (1 << PCS_BOOT_COMPLETE_LBN))
+			break;
+		count--;
+		udelay(PCS_BOOT_POLL_DELAY);
+	}
+
+	if (!count) {
+		EFX_ERR(efx, "%s: PHY boot timed out. Last status "
+			"%x\n", __func__,
+			(boot_stat >> PCS_BOOT_PROGRESS_LBN) &
+			((1 << PCS_BOOT_PROGRESS_WIDTH) - 1));
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static void tenxpress_reset_xaui(struct efx_nic *efx);
+
+static int tenxpress_init(struct efx_nic *efx)
+{
+	int rc, reg;
+
+	/* Turn on the clock  */
+	reg = (1 << CLK312_EN_LBN);
+	mdio_clause45_write(efx, efx->mii.phy_id,
+			    MDIO_MMD_PCS, PCS_TEST_SELECT_REG, reg);
+
+	rc = tenxpress_phy_check(efx);
+	if (rc < 0)
+		return rc;
+
+	/* Set the LEDs up as: Green = Link, Amber = Link/Act, Red = Off */
+	reg = mdio_clause45_read(efx, efx->mii.phy_id,
+				 MDIO_MMD_PMAPMD, PMA_PMD_LED_CTRL_REG);
+	reg |= (1 << PMA_PMA_LED_ACTIVITY_LBN);
+	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
+			    PMA_PMD_LED_CTRL_REG, reg);
+
+	reg = PMA_PMD_LED_DEFAULT;
+	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
+			    PMA_PMD_LED_OVERR_REG, reg);
+
+	return rc;
+}
+
+static int tenxpress_phy_init(struct efx_nic *efx)
+{
+	struct tenxpress_phy_data *phy_data;
+	int rc = 0;
+
+	phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
+	efx->phy_data = phy_data;
+
+	tenxpress_set_state(efx, TENXPRESS_STATUS_NORMAL);
+
+	rc = mdio_clause45_wait_reset_mmds(efx,
+					   TENXPRESS_REQUIRED_DEVS);
+	if (rc < 0)
+		goto fail;
+
+	rc = mdio_clause45_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0);
+	if (rc < 0)
+		goto fail;
+
+	rc = tenxpress_init(efx);
+	if (rc < 0)
+		goto fail;
+
+	schedule_timeout_uninterruptible(HZ / 5); /* 200ms */
+
+	/* Let XGXS and SerDes out of reset and resets 10XPress */
+	falcon_reset_xaui(efx);
+
+	return 0;
+
+ fail:
+	kfree(efx->phy_data);
+	efx->phy_data = NULL;
+	return rc;
+}
+
+static void tenxpress_set_bad_lp(struct efx_nic *efx, int bad_lp)
+{
+	struct tenxpress_phy_data *pd = efx->phy_data;
+	int reg;
+
+	/* Nothing to do if all is well and was previously so. */
+	if (!(bad_lp || pd->bad_lp_tries))
+		return;
+
+	reg = mdio_clause45_read(efx, efx->mii.phy_id,
+				 MDIO_MMD_PMAPMD, PMA_PMD_LED_OVERR_REG);
+
+	if (bad_lp)
+		pd->bad_lp_tries++;
+	else
+		pd->bad_lp_tries = 0;
+
+	if (pd->bad_lp_tries == MAX_BAD_LP_TRIES) {
+		pd->bad_lp_tries = 0;	/* Restart count */
+		reg &= ~(PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN);
+		reg |= (PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN);
+		EFX_ERR(efx, "This NIC appears to be plugged into"
+			" a port that is not 10GBASE-T capable.\n"
+			" This PHY is 10GBASE-T ONLY, so no link can"
+			" be established.\n");
+	} else {
+		reg |= (PMA_PMD_LED_OFF << PMA_PMD_LED_RX_LBN);
+	}
+	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
+			    PMA_PMD_LED_OVERR_REG, reg);
+}
+
+/* Check link status and return a boolean OK value. If the link is NOT
+ * OK we have a quick rummage round to see if we appear to be plugged
+ * into a non-10GBT port and if so warn the user that they won't get
+ * link any time soon as we are 10GBT only, unless caller specified
+ * not to do this check (it isn't useful in loopback) */
+static int tenxpress_link_ok(struct efx_nic *efx, int check_lp)
+{
+	int ok = mdio_clause45_links_ok(efx, TENXPRESS_REQUIRED_DEVS);
+
+	if (ok) {
+		tenxpress_set_bad_lp(efx, 0);
+	} else if (check_lp) {
+		/* Are we plugged into the wrong sort of link? */
+		int bad_lp = 0;
+		int phy_id = efx->mii.phy_id;
+		int an_stat = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
+						 MDIO_AN_STATUS);
+		int xphy_stat = mdio_clause45_read(efx, phy_id,
+						   MDIO_MMD_PMAPMD,
+						   PMA_PMD_XSTATUS_REG);
+		/* Are we plugged into anything that sends FLPs? If
+		 * not we can't distinguish between not being plugged
+		 * in and being plugged into a non-AN antique. The FLP
+		 * bit has the advantage of not clearing when autoneg
+		 * restarts. */
+		if (!(xphy_stat & (1 << PMA_PMD_XSTAT_FLP_LBN))) {
+			tenxpress_set_bad_lp(efx, 0);
+			return ok;
+		}
+
+		/* If it can do 10GBT it must be XNP capable */
+		bad_lp = !(an_stat & (1 << MDIO_AN_STATUS_XNP_LBN));
+		if (!bad_lp && (an_stat & (1 << MDIO_AN_STATUS_PAGE_LBN))) {
+			bad_lp = !(mdio_clause45_read(efx, phy_id,
+					MDIO_MMD_AN, MDIO_AN_10GBT_STATUS) &
+					(1 << MDIO_AN_10GBT_STATUS_LP_10G_LBN));
+		}
+		tenxpress_set_bad_lp(efx, bad_lp);
+	}
+	return ok;
+}
+
+static void tenxpress_phy_reconfigure(struct efx_nic *efx)
+{
+	if (!tenxpress_state_is(efx, TENXPRESS_STATUS_NORMAL))
+		return;
+
+	efx->link_up = tenxpress_link_ok(efx, 0);
+	efx->link_options = GM_LPA_10000FULL;
+}
+
+static void tenxpress_phy_clear_interrupt(struct efx_nic *efx)
+{
+	/* Nothing done here - LASI interrupts aren't reliable so poll  */
+}
+
+
+/* Poll PHY for interrupt */
+static int tenxpress_phy_check_hw(struct efx_nic *efx)
+{
+	struct tenxpress_phy_data *phy_data = efx->phy_data;
+	int phy_up = tenxpress_state_is(efx, TENXPRESS_STATUS_NORMAL);
+	int link_ok;
+
+	link_ok = phy_up && tenxpress_link_ok(efx, 1);
+
+	if (link_ok != efx->link_up)
+		falcon_xmac_sim_phy_event(efx);
+
+	/* Nothing to check if we've already shut down the PHY */
+	if (!phy_up)
+		return 0;
+
+	if (atomic_read(&phy_data->bad_crc_count) > crc_error_reset_threshold) {
+		EFX_ERR(efx, "Resetting XAUI due to too many CRC errors\n");
+		falcon_reset_xaui(efx);
+		atomic_set(&phy_data->bad_crc_count, 0);
+	}
+
+	return 0;
+}
+
+static void tenxpress_phy_fini(struct efx_nic *efx)
+{
+	int reg;
+
+	/* Power down the LNPGA */
+	reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN);
+	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
+			    PMA_PMD_XCONTROL_REG, reg);
+
+	/* Waiting here ensures that the board fini, which can turn off the
+	 * power to the PHY, won't get run until the LNPGA powerdown has been
+	 * given long enough to complete. */
+	schedule_timeout_uninterruptible(LNPGA_PDOWN_WAIT); /* 200 ms */
+
+	kfree(efx->phy_data);
+	efx->phy_data = NULL;
+}
+
+
+/* Set the RX and TX LEDs and Link LED flashing. The other LEDs
+ * (which probably aren't wired anyway) are left in AUTO mode */
+void tenxpress_phy_blink(struct efx_nic *efx, int blink)
+{
+	int reg;
+
+	if (blink)
+		reg = (PMA_PMD_LED_FLASH << PMA_PMD_LED_TX_LBN) |
+			(PMA_PMD_LED_FLASH << PMA_PMD_LED_RX_LBN) |
+			(PMA_PMD_LED_FLASH << PMA_PMD_LED_LINK_LBN);
+	else
+		reg = PMA_PMD_LED_DEFAULT;
+
+	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
+			    PMA_PMD_LED_OVERR_REG, reg);
+}
+
+static void tenxpress_reset_xaui(struct efx_nic *efx)
+{
+	int phy = efx->mii.phy_id;
+	int clk_ctrl, test_select, soft_rst2;
+
+	/* Real work is done on clock_ctrl other resets are thought to be
+	 * optional but make the reset more reliable
+	 */
+
+	/* Read */
+	clk_ctrl = mdio_clause45_read(efx, phy, MDIO_MMD_PCS,
+				      PCS_CLOCK_CTRL_REG);
+	test_select = mdio_clause45_read(efx, phy, MDIO_MMD_PCS,
+					 PCS_TEST_SELECT_REG);
+	soft_rst2 = mdio_clause45_read(efx, phy, MDIO_MMD_PCS,
+				       PCS_SOFT_RST2_REG);
+
+	/* Put in reset */
+	test_select &= ~(1 << CLK312_EN_LBN);
+	mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
+			    PCS_TEST_SELECT_REG, test_select);
+
+	soft_rst2 &= ~((1 << XGXS_RST_N_LBN) | (1 << SERDES_RST_N_LBN));
+	mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
+			    PCS_SOFT_RST2_REG, soft_rst2);
+
+	clk_ctrl &= ~(1 << PLL312_RST_N_LBN);
+	mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
+			    PCS_CLOCK_CTRL_REG, clk_ctrl);
+	udelay(10);
+
+	/* Remove reset */
+	clk_ctrl |= (1 << PLL312_RST_N_LBN);
+	mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
+			    PCS_CLOCK_CTRL_REG, clk_ctrl);
+	udelay(10);
+
+	soft_rst2 |= ((1 << XGXS_RST_N_LBN) | (1 << SERDES_RST_N_LBN));
+	mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
+			    PCS_SOFT_RST2_REG, soft_rst2);
+	udelay(10);
+
+	test_select |= (1 << CLK312_EN_LBN);
+	mdio_clause45_write(efx, phy, MDIO_MMD_PCS,
+			    PCS_TEST_SELECT_REG, test_select);
+	udelay(10);
+}
+
+struct efx_phy_operations falcon_tenxpress_phy_ops = {
+	.init             = tenxpress_phy_init,
+	.reconfigure      = tenxpress_phy_reconfigure,
+	.check_hw         = tenxpress_phy_check_hw,
+	.fini             = tenxpress_phy_fini,
+	.clear_interrupt  = tenxpress_phy_clear_interrupt,
+	.reset_xaui       = tenxpress_reset_xaui,
+	.mmds             = TENXPRESS_REQUIRED_DEVS,
+};
diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c
new file mode 100644
index 0000000..fbb866b
--- /dev/null
+++ b/drivers/net/sfc/tx.c
@@ -0,0 +1,452 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2005-2008 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#include <linux/pci.h>
+#include <linux/tcp.h>
+#include <linux/ip.h>
+#include <linux/in.h>
+#include <linux/if_ether.h>
+#include <linux/highmem.h>
+#include "net_driver.h"
+#include "tx.h"
+#include "efx.h"
+#include "falcon.h"
+#include "workarounds.h"
+
+/*
+ * TX descriptor ring full threshold
+ *
+ * The tx_queue descriptor ring fill-level must fall below this value
+ * before we restart the netif queue
+ */
+#define EFX_NETDEV_TX_THRESHOLD(_tx_queue)	\
+	(_tx_queue->efx->type->txd_ring_mask / 2u)
+
+/* We want to be able to nest calls to netif_stop_queue(), since each
+ * channel can have an individual stop on the queue.
+ */
+void efx_stop_queue(struct efx_nic *efx)
+{
+	spin_lock_bh(&efx->netif_stop_lock);
+	EFX_TRACE(efx, "stop TX queue\n");
+
+	atomic_inc(&efx->netif_stop_count);
+	netif_stop_queue(efx->net_dev);
+
+	spin_unlock_bh(&efx->netif_stop_lock);
+}
+
+/* Wake netif's TX queue
+ * We want to be able to nest calls to netif_stop_queue(), since each
+ * channel can have an individual stop on the queue.
+ */
+inline void efx_wake_queue(struct efx_nic *efx)
+{
+	local_bh_disable();
+	if (atomic_dec_and_lock(&efx->netif_stop_count,
+				&efx->netif_stop_lock)) {
+		EFX_TRACE(efx, "waking TX queue\n");
+		netif_wake_queue(efx->net_dev);
+		spin_unlock(&efx->netif_stop_lock);
+	}
+	local_bh_enable();
+}
+
+static inline void efx_dequeue_buffer(struct efx_tx_queue *tx_queue,
+				      struct efx_tx_buffer *buffer)
+{
+	if (buffer->unmap_len) {
+		struct pci_dev *pci_dev = tx_queue->efx->pci_dev;
+		if (buffer->unmap_single)
+			pci_unmap_single(pci_dev, buffer->unmap_addr,
+					 buffer->unmap_len, PCI_DMA_TODEVICE);
+		else
+			pci_unmap_page(pci_dev, buffer->unmap_addr,
+				       buffer->unmap_len, PCI_DMA_TODEVICE);
+		buffer->unmap_len = 0;
+		buffer->unmap_single = 0;
+	}
+
+	if (buffer->skb) {
+		dev_kfree_skb_any((struct sk_buff *) buffer->skb);
+		buffer->skb = NULL;
+		EFX_TRACE(tx_queue->efx, "TX queue %d transmission id %x "
+			  "complete\n", tx_queue->queue, read_ptr);
+	}
+}
+
+
+/*
+ * Add a socket buffer to a TX queue
+ *
+ * This maps all fragments of a socket buffer for DMA and adds them to
+ * the TX queue.  The queue's insert pointer will be incremented by
+ * the number of fragments in the socket buffer.
+ *
+ * If any DMA mapping fails, any mapped fragments will be unmapped,
+ * the queue's insert pointer will be restored to its original value.
+ *
+ * Returns NETDEV_TX_OK or NETDEV_TX_BUSY
+ * You must hold netif_tx_lock() to call this function.
+ */
+static inline int efx_enqueue_skb(struct efx_tx_queue *tx_queue,
+				  const struct sk_buff *skb)
+{
+	struct efx_nic *efx = tx_queue->efx;
+	struct pci_dev *pci_dev = efx->pci_dev;
+	struct efx_tx_buffer *buffer;
+	skb_frag_t *fragment;
+	struct page *page;
+	int page_offset;
+	unsigned int len, unmap_len = 0, fill_level, insert_ptr, misalign;
+	dma_addr_t dma_addr, unmap_addr = 0;
+	unsigned int dma_len;
+	unsigned unmap_single;
+	int q_space, i = 0;
+	int rc = NETDEV_TX_OK;
+
+	EFX_BUG_ON_PARANOID(tx_queue->write_count != tx_queue->insert_count);
+
+	/* Get size of the initial fragment */
+	len = skb_headlen(skb);
+
+	fill_level = tx_queue->insert_count - tx_queue->old_read_count;
+	q_space = efx->type->txd_ring_mask - 1 - fill_level;
+
+	/* Map for DMA.  Use pci_map_single rather than pci_map_page
+	 * since this is more efficient on machines with sparse
+	 * memory.
+	 */
+	unmap_single = 1;
+	dma_addr = pci_map_single(pci_dev, skb->data, len, PCI_DMA_TODEVICE);
+
+	/* Process all fragments */
+	while (1) {
+		if (unlikely(pci_dma_mapping_error(dma_addr)))
+			goto pci_err;
+
+		/* Store fields for marking in the per-fragment final
+		 * descriptor */
+		unmap_len = len;
+		unmap_addr = dma_addr;
+
+		/* Add to TX queue, splitting across DMA boundaries */
+		do {
+			if (unlikely(q_space-- <= 0)) {
+				/* It might be that completions have
+				 * happened since the xmit path last
+				 * checked.  Update the xmit path's
+				 * copy of read_count.
+				 */
+				++tx_queue->stopped;
+				/* This memory barrier protects the
+				 * change of stopped from the access
+				 * of read_count. */
+				smp_mb();
+				tx_queue->old_read_count =
+					*(volatile unsigned *)
+					&tx_queue->read_count;
+				fill_level = (tx_queue->insert_count
+					      - tx_queue->old_read_count);
+				q_space = (efx->type->txd_ring_mask - 1 -
+					   fill_level);
+				if (unlikely(q_space-- <= 0))
+					goto stop;
+				smp_mb();
+				--tx_queue->stopped;
+			}
+
+			insert_ptr = (tx_queue->insert_count &
+				      efx->type->txd_ring_mask);
+			buffer = &tx_queue->buffer[insert_ptr];
+			EFX_BUG_ON_PARANOID(buffer->skb);
+			EFX_BUG_ON_PARANOID(buffer->len);
+			EFX_BUG_ON_PARANOID(buffer->continuation != 1);
+			EFX_BUG_ON_PARANOID(buffer->unmap_len);
+
+			dma_len = (((~dma_addr) & efx->type->tx_dma_mask) + 1);
+			if (likely(dma_len > len))
+				dma_len = len;
+
+			misalign = (unsigned)dma_addr & efx->type->bug5391_mask;
+			if (misalign && dma_len + misalign > 512)
+				dma_len = 512 - misalign;
+
+			/* Fill out per descriptor fields */
+			buffer->len = dma_len;
+			buffer->dma_addr = dma_addr;
+			len -= dma_len;
+			dma_addr += dma_len;
+			++tx_queue->insert_count;
+		} while (len);
+
+		/* Transfer ownership of the unmapping to the final buffer */
+		buffer->unmap_addr = unmap_addr;
+		buffer->unmap_single = unmap_single;
+		buffer->unmap_len = unmap_len;
+		unmap_len = 0;
+
+		/* Get address and size of next fragment */
+		if (i >= skb_shinfo(skb)->nr_frags)
+			break;
+		fragment = &skb_shinfo(skb)->frags[i];
+		len = fragment->size;
+		page = fragment->page;
+		page_offset = fragment->page_offset;
+		i++;
+		/* Map for DMA */
+		unmap_single = 0;
+		dma_addr = pci_map_page(pci_dev, page, page_offset, len,
+					PCI_DMA_TODEVICE);
+	}
+
+	/* Transfer ownership of the skb to the final buffer */
+	buffer->skb = skb;
+	buffer->continuation = 0;
+
+	/* Pass off to hardware */
+	falcon_push_buffers(tx_queue);
+
+	return NETDEV_TX_OK;
+
+ pci_err:
+	EFX_ERR_RL(efx, " TX queue %d could not map skb with %d bytes %d "
+		   "fragments for DMA\n", tx_queue->queue, skb->len,
+		   skb_shinfo(skb)->nr_frags + 1);
+
+	/* Mark the packet as transmitted, and free the SKB ourselves */
+	dev_kfree_skb_any((struct sk_buff *)skb);
+	goto unwind;
+
+ stop:
+	rc = NETDEV_TX_BUSY;
+
+	if (tx_queue->stopped == 1)
+		efx_stop_queue(efx);
+
+ unwind:
+	/* Work backwards until we hit the original insert pointer value */
+	while (tx_queue->insert_count != tx_queue->write_count) {
+		--tx_queue->insert_count;
+		insert_ptr = tx_queue->insert_count & efx->type->txd_ring_mask;
+		buffer = &tx_queue->buffer[insert_ptr];
+		efx_dequeue_buffer(tx_queue, buffer);
+		buffer->len = 0;
+	}
+
+	/* Free the fragment we were mid-way through pushing */
+	if (unmap_len)
+		pci_unmap_page(pci_dev, unmap_addr, unmap_len,
+			       PCI_DMA_TODEVICE);
+
+	return rc;
+}
+
+/* Remove packets from the TX queue
+ *
+ * This removes packets from the TX queue, up to and including the
+ * specified index.
+ */
+static inline void efx_dequeue_buffers(struct efx_tx_queue *tx_queue,
+				       unsigned int index)
+{
+	struct efx_nic *efx = tx_queue->efx;
+	unsigned int stop_index, read_ptr;
+	unsigned int mask = tx_queue->efx->type->txd_ring_mask;
+
+	stop_index = (index + 1) & mask;
+	read_ptr = tx_queue->read_count & mask;
+
+	while (read_ptr != stop_index) {
+		struct efx_tx_buffer *buffer = &tx_queue->buffer[read_ptr];
+		if (unlikely(buffer->len == 0)) {
+			EFX_ERR(tx_queue->efx, "TX queue %d spurious TX "
+				"completion id %x\n", tx_queue->queue,
+				read_ptr);
+			efx_schedule_reset(efx, RESET_TYPE_TX_SKIP);
+			return;
+		}
+
+		efx_dequeue_buffer(tx_queue, buffer);
+		buffer->continuation = 1;
+		buffer->len = 0;
+
+		++tx_queue->read_count;
+		read_ptr = tx_queue->read_count & mask;
+	}
+}
+
+/* Initiate a packet transmission on the specified TX queue.
+ * Note that returning anything other than NETDEV_TX_OK will cause the
+ * OS to free the skb.
+ *
+ * This function is split out from efx_hard_start_xmit to allow the
+ * loopback test to direct packets via specific TX queues.  It is
+ * therefore a non-static inline, so as not to penalise performance
+ * for non-loopback transmissions.
+ *
+ * Context: netif_tx_lock held
+ */
+inline int efx_xmit(struct efx_nic *efx,
+		    struct efx_tx_queue *tx_queue, struct sk_buff *skb)
+{
+	int rc;
+
+	/* Map fragments for DMA and add to TX queue */
+	rc = efx_enqueue_skb(tx_queue, skb);
+	if (unlikely(rc != NETDEV_TX_OK))
+		goto out;
+
+	/* Update last TX timer */
+	efx->net_dev->trans_start = jiffies;
+
+ out:
+	return rc;
+}
+
+/* Initiate a packet transmission.  We use one channel per CPU
+ * (sharing when we have more CPUs than channels).  On Falcon, the TX
+ * completion events will be directed back to the CPU that transmitted
+ * the packet, which should be cache-efficient.
+ *
+ * Context: non-blocking.
+ * Note that returning anything other than NETDEV_TX_OK will cause the
+ * OS to free the skb.
+ */
+int efx_hard_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
+{
+	struct efx_nic *efx = net_dev->priv;
+	return efx_xmit(efx, &efx->tx_queue[0], skb);
+}
+
+void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index)
+{
+	unsigned fill_level;
+	struct efx_nic *efx = tx_queue->efx;
+
+	EFX_BUG_ON_PARANOID(index > efx->type->txd_ring_mask);
+
+	efx_dequeue_buffers(tx_queue, index);
+
+	/* See if we need to restart the netif queue.  This barrier
+	 * separates the update of read_count from the test of
+	 * stopped. */
+	smp_mb();
+	if (unlikely(tx_queue->stopped)) {
+		fill_level = tx_queue->insert_count - tx_queue->read_count;
+		if (fill_level < EFX_NETDEV_TX_THRESHOLD(tx_queue)) {
+			EFX_BUG_ON_PARANOID(!NET_DEV_REGISTERED(efx));
+
+			/* Do this under netif_tx_lock(), to avoid racing
+			 * with efx_xmit(). */
+			netif_tx_lock(efx->net_dev);
+			if (tx_queue->stopped) {
+				tx_queue->stopped = 0;
+				efx_wake_queue(efx);
+			}
+			netif_tx_unlock(efx->net_dev);
+		}
+	}
+}
+
+int efx_probe_tx_queue(struct efx_tx_queue *tx_queue)
+{
+	struct efx_nic *efx = tx_queue->efx;
+	unsigned int txq_size;
+	int i, rc;
+
+	EFX_LOG(efx, "creating TX queue %d\n", tx_queue->queue);
+
+	/* Allocate software ring */
+	txq_size = (efx->type->txd_ring_mask + 1) * sizeof(*tx_queue->buffer);
+	tx_queue->buffer = kzalloc(txq_size, GFP_KERNEL);
+	if (!tx_queue->buffer) {
+		rc = -ENOMEM;
+		goto fail1;
+	}
+	for (i = 0; i <= efx->type->txd_ring_mask; ++i)
+		tx_queue->buffer[i].continuation = 1;
+
+	/* Allocate hardware ring */
+	rc = falcon_probe_tx(tx_queue);
+	if (rc)
+		goto fail2;
+
+	return 0;
+
+ fail2:
+	kfree(tx_queue->buffer);
+	tx_queue->buffer = NULL;
+ fail1:
+	tx_queue->used = 0;
+
+	return rc;
+}
+
+int efx_init_tx_queue(struct efx_tx_queue *tx_queue)
+{
+	EFX_LOG(tx_queue->efx, "initialising TX queue %d\n", tx_queue->queue);
+
+	tx_queue->insert_count = 0;
+	tx_queue->write_count = 0;
+	tx_queue->read_count = 0;
+	tx_queue->old_read_count = 0;
+	BUG_ON(tx_queue->stopped);
+
+	/* Set up TX descriptor ring */
+	return falcon_init_tx(tx_queue);
+}
+
+void efx_release_tx_buffers(struct efx_tx_queue *tx_queue)
+{
+	struct efx_tx_buffer *buffer;
+
+	if (!tx_queue->buffer)
+		return;
+
+	/* Free any buffers left in the ring */
+	while (tx_queue->read_count != tx_queue->write_count) {
+		buffer = &tx_queue->buffer[tx_queue->read_count &
+					   tx_queue->efx->type->txd_ring_mask];
+		efx_dequeue_buffer(tx_queue, buffer);
+		buffer->continuation = 1;
+		buffer->len = 0;
+
+		++tx_queue->read_count;
+	}
+}
+
+void efx_fini_tx_queue(struct efx_tx_queue *tx_queue)
+{
+	EFX_LOG(tx_queue->efx, "shutting down TX queue %d\n", tx_queue->queue);
+
+	/* Flush TX queue, remove descriptor ring */
+	falcon_fini_tx(tx_queue);
+
+	efx_release_tx_buffers(tx_queue);
+
+	/* Release queue's stop on port, if any */
+	if (tx_queue->stopped) {
+		tx_queue->stopped = 0;
+		efx_wake_queue(tx_queue->efx);
+	}
+}
+
+void efx_remove_tx_queue(struct efx_tx_queue *tx_queue)
+{
+	EFX_LOG(tx_queue->efx, "destroying TX queue %d\n", tx_queue->queue);
+	falcon_remove_tx(tx_queue);
+
+	kfree(tx_queue->buffer);
+	tx_queue->buffer = NULL;
+	tx_queue->used = 0;
+}
+
+
diff --git a/drivers/net/sfc/tx.h b/drivers/net/sfc/tx.h
new file mode 100644
index 0000000..1526a73
--- /dev/null
+++ b/drivers/net/sfc/tx.h
@@ -0,0 +1,24 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2006 Fen Systems Ltd.
+ * Copyright 2006-2008 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_TX_H
+#define EFX_TX_H
+
+#include "net_driver.h"
+
+int efx_probe_tx_queue(struct efx_tx_queue *tx_queue);
+void efx_remove_tx_queue(struct efx_tx_queue *tx_queue);
+int efx_init_tx_queue(struct efx_tx_queue *tx_queue);
+void efx_fini_tx_queue(struct efx_tx_queue *tx_queue);
+
+int efx_hard_start_xmit(struct sk_buff *skb, struct net_device *net_dev);
+void efx_release_tx_buffers(struct efx_tx_queue *tx_queue);
+
+#endif /* EFX_TX_H */
diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h
new file mode 100644
index 0000000..dca62f1
--- /dev/null
+++ b/drivers/net/sfc/workarounds.h
@@ -0,0 +1,56 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2006-2008 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_WORKAROUNDS_H
+#define EFX_WORKAROUNDS_H
+
+/*
+ * Hardware workarounds.
+ * Bug numbers are from Solarflare's Bugzilla.
+ */
+
+#define EFX_WORKAROUND_ALWAYS(efx) 1
+#define EFX_WORKAROUND_FALCON_A(efx) (FALCON_REV(efx) <= FALCON_REV_A1)
+
+/* XAUI resets if link not detected */
+#define EFX_WORKAROUND_5147 EFX_WORKAROUND_ALWAYS
+/* SNAP frames have TOBE_DISC set */
+#define EFX_WORKAROUND_5475 EFX_WORKAROUND_ALWAYS
+/* RX PCIe double split performance issue */
+#define EFX_WORKAROUND_7575 EFX_WORKAROUND_ALWAYS
+/* TX pkt parser problem with <= 16 byte TXes */
+#define EFX_WORKAROUND_9141 EFX_WORKAROUND_ALWAYS
+/* XGXS and XAUI reset sequencing in SW */
+#define EFX_WORKAROUND_9388 EFX_WORKAROUND_ALWAYS
+/* Low rate CRC errors require XAUI reset */
+#define EFX_WORKAROUND_10750 EFX_WORKAROUND_ALWAYS
+/* TX_EV_PKT_ERR can be caused by a dangling TX descriptor
+ * or a PCIe error (bug 11028) */
+#define EFX_WORKAROUND_10727 EFX_WORKAROUND_ALWAYS
+/* Transmit flow control may get disabled */
+#define EFX_WORKAROUND_11482 EFX_WORKAROUND_ALWAYS
+/* Flush events can take a very long time to appear */
+#define EFX_WORKAROUND_11557 EFX_WORKAROUND_ALWAYS
+
+/* Spurious parity errors in TSORT buffers */
+#define EFX_WORKAROUND_5129 EFX_WORKAROUND_FALCON_A
+/* iSCSI parsing errors */
+#define EFX_WORKAROUND_5583 EFX_WORKAROUND_FALCON_A
+/* RX events go missing */
+#define EFX_WORKAROUND_5676 EFX_WORKAROUND_FALCON_A
+/* RX_RESET on A1 */
+#define EFX_WORKAROUND_6555 EFX_WORKAROUND_FALCON_A
+/* Increase filter depth to avoid RX_RESET */
+#define EFX_WORKAROUND_7244 EFX_WORKAROUND_FALCON_A
+/* Flushes may never complete */
+#define EFX_WORKAROUND_7803 EFX_WORKAROUND_FALCON_A
+/* Leak overlength packets rather than free */
+#define EFX_WORKAROUND_8071 EFX_WORKAROUND_FALCON_A
+
+#endif /* EFX_WORKAROUNDS_H */
diff --git a/drivers/net/sfc/xenpack.h b/drivers/net/sfc/xenpack.h
new file mode 100644
index 0000000..b0d1f22
--- /dev/null
+++ b/drivers/net/sfc/xenpack.h
@@ -0,0 +1,62 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2006 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_XENPACK_H
+#define EFX_XENPACK_H
+
+/* Exported functions from Xenpack standard PHY control */
+
+#include "mdio_10g.h"
+
+/****************************************************************************/
+/* XENPACK MDIO register extensions */
+#define MDIO_XP_LASI_RX_CTRL	(0x9000)
+#define MDIO_XP_LASI_TX_CTRL	(0x9001)
+#define MDIO_XP_LASI_CTRL	(0x9002)
+#define MDIO_XP_LASI_RX_STAT	(0x9003)
+#define MDIO_XP_LASI_TX_STAT	(0x9004)
+#define MDIO_XP_LASI_STAT	(0x9005)
+
+/* Control/Status bits */
+#define XP_LASI_LS_ALARM	(1 << 0)
+#define XP_LASI_TX_ALARM	(1 << 1)
+#define XP_LASI_RX_ALARM	(1 << 2)
+/* These two are Quake vendor extensions to the standard XENPACK defines */
+#define XP_LASI_LS_INTB		(1 << 3)
+#define XP_LASI_TEST		(1 << 7)
+
+/* Enable LASI interrupts for PHY */
+static inline void xenpack_enable_lasi_irqs(struct efx_nic *efx)
+{
+	int reg;
+	int phy_id = efx->mii.phy_id;
+	/* Read to clear LASI status register */
+	reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
+				 MDIO_XP_LASI_STAT);
+
+	mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
+			    MDIO_XP_LASI_CTRL, XP_LASI_LS_ALARM);
+}
+
+/* Read the LASI interrupt status to clear the interrupt. */
+static inline int xenpack_clear_lasi_irqs(struct efx_nic *efx)
+{
+	/* Read to clear link status alarm */
+	return mdio_clause45_read(efx, efx->mii.phy_id,
+				  MDIO_MMD_PMAPMD, MDIO_XP_LASI_STAT);
+}
+
+/* Turn off LASI interrupts */
+static inline void xenpack_disable_lasi_irqs(struct efx_nic *efx)
+{
+	mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
+			    MDIO_XP_LASI_CTRL, 0);
+}
+
+#endif /* EFX_XENPACK_H */
diff --git a/drivers/net/sfc/xfp_phy.c b/drivers/net/sfc/xfp_phy.c
new file mode 100644
index 0000000..66dd5bf
--- /dev/null
+++ b/drivers/net/sfc/xfp_phy.c
@@ -0,0 +1,132 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2006-2008 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+/*
+ * Driver for XFP optical PHYs (plus some support specific to the Quake 2032)
+ * See www.amcc.com for details (search for qt2032)
+ */
+
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include "efx.h"
+#include "gmii.h"
+#include "mdio_10g.h"
+#include "xenpack.h"
+#include "phy.h"
+#include "mac.h"
+
+#define XFP_REQUIRED_DEVS (MDIO_MMDREG_DEVS0_PCS |	\
+			   MDIO_MMDREG_DEVS0_PMAPMD |	\
+			   MDIO_MMDREG_DEVS0_PHYXS)
+
+/****************************************************************************/
+/* Quake-specific MDIO registers */
+#define MDIO_QUAKE_LED0_REG	(0xD006)
+
+void xfp_set_led(struct efx_nic *p, int led, int mode)
+{
+	int addr = MDIO_QUAKE_LED0_REG + led;
+	mdio_clause45_write(p, p->mii.phy_id, MDIO_MMD_PMAPMD, addr,
+			    mode);
+}
+
+#define XFP_MAX_RESET_TIME 500
+#define XFP_RESET_WAIT 10
+
+/* Reset the PHYXS MMD. This is documented (for the Quake PHY) as doing
+ * a complete soft reset.
+ */
+static int xfp_reset_phy(struct efx_nic *efx)
+{
+	int rc;
+
+	rc = mdio_clause45_reset_mmd(efx, MDIO_MMD_PHYXS,
+				     XFP_MAX_RESET_TIME / XFP_RESET_WAIT,
+				     XFP_RESET_WAIT);
+	if (rc < 0)
+		goto fail;
+
+	/* Wait 250ms for the PHY to complete bootup */
+	msleep(250);
+
+	/* Check that all the MMDs we expect are present and responding. We
+	 * expect faults on some if the link is down, but not on the PHY XS */
+	rc = mdio_clause45_check_mmds(efx, XFP_REQUIRED_DEVS,
+				      MDIO_MMDREG_DEVS0_PHYXS);
+	if (rc < 0)
+		goto fail;
+
+	efx->board_info.init_leds(efx);
+
+	return rc;
+
+ fail:
+	EFX_ERR(efx, "XFP: reset timed out!\n");
+	return rc;
+}
+
+static int xfp_phy_init(struct efx_nic *efx)
+{
+	u32 devid = mdio_clause45_read_id(efx, MDIO_MMD_PHYXS);
+	int rc;
+
+	EFX_INFO(efx, "XFP: PHY ID reg %x (OUI %x model %x revision"
+		 " %x)\n", devid, MDIO_ID_OUI(devid), MDIO_ID_MODEL(devid),
+		 MDIO_ID_REV(devid));
+
+	rc = xfp_reset_phy(efx);
+
+	EFX_INFO(efx, "XFP: PHY init %s.\n",
+		 rc ? "failed" : "successful");
+
+	return rc;
+}
+
+static void xfp_phy_clear_interrupt(struct efx_nic *efx)
+{
+	xenpack_clear_lasi_irqs(efx);
+}
+
+static int xfp_link_ok(struct efx_nic *efx)
+{
+	return mdio_clause45_links_ok(efx, XFP_REQUIRED_DEVS);
+}
+
+static int xfp_phy_check_hw(struct efx_nic *efx)
+{
+	int rc = 0;
+	int link_up = xfp_link_ok(efx);
+	/* Simulate a PHY event if link state has changed */
+	if (link_up != efx->link_up)
+		falcon_xmac_sim_phy_event(efx);
+
+	return rc;
+}
+
+static void xfp_phy_reconfigure(struct efx_nic *efx)
+{
+	efx->link_up = xfp_link_ok(efx);
+	efx->link_options = GM_LPA_10000FULL;
+}
+
+
+static void xfp_phy_fini(struct efx_nic *efx)
+{
+	/* Clobber the LED if it was blinking */
+	efx->board_info.blink(efx, 0);
+}
+
+struct efx_phy_operations falcon_xfp_phy_ops = {
+	.init            = xfp_phy_init,
+	.reconfigure     = xfp_phy_reconfigure,
+	.check_hw        = xfp_phy_check_hw,
+	.fini            = xfp_phy_fini,
+	.clear_interrupt = xfp_phy_clear_interrupt,
+	.reset_xaui      = efx_port_dummy_op_void,
+	.mmds            = XFP_REQUIRED_DEVS,
+};