hwmon: (ucd90320) Add minimum delay between bus accesses
When probing the ucd90320 access to some of the registers randomly fails.
Sometimes it NACKs a transfer, sometimes it returns just random data and
the PEC check fails.
Experimentation shows that this seems to be triggered by a register access
directly back to back with a previous register write. Experimentation also
shows that inserting a small delay after register writes makes the issue go
away.
Use a similar solution to what the max15301 driver does to solve the same
problem. Create a custom set of bus read and write functions that make sure
that the delay is added.
Fixes: a470f11c5ba2 ("hwmon: (pmbus/ucd9000) Add support for UCD90320 Power Sequencer")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230312160312.2227405-1-lars@metafoo.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c
index 75fc770..3daaf22 100644
--- a/drivers/hwmon/pmbus/ucd9000.c
+++ b/drivers/hwmon/pmbus/ucd9000.c
@@ -7,6 +7,7 @@
*/
#include <linux/debugfs.h>
+#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_device.h>
@@ -16,6 +17,7 @@
#include <linux/i2c.h>
#include <linux/pmbus.h>
#include <linux/gpio/driver.h>
+#include <linux/timekeeping.h>
#include "pmbus.h"
enum chips { ucd9000, ucd90120, ucd90124, ucd90160, ucd90320, ucd9090,
@@ -65,6 +67,7 @@ struct ucd9000_data {
struct gpio_chip gpio;
#endif
struct dentry *debugfs;
+ ktime_t write_time;
};
#define to_ucd9000_data(_info) container_of(_info, struct ucd9000_data, info)
@@ -73,6 +76,73 @@ struct ucd9000_debugfs_entry {
u8 index;
};
+/*
+ * It has been observed that the UCD90320 randomly fails register access when
+ * doing another access right on the back of a register write. To mitigate this
+ * make sure that there is a minimum delay between a write access and the
+ * following access. The 250us is based on experimental data. At a delay of
+ * 200us the issue seems to go away. Add a bit of extra margin to allow for
+ * system to system differences.
+ */
+#define UCD90320_WAIT_DELAY_US 250
+
+static inline void ucd90320_wait(const struct ucd9000_data *data)
+{
+ s64 delta = ktime_us_delta(ktime_get(), data->write_time);
+
+ if (delta < UCD90320_WAIT_DELAY_US)
+ udelay(UCD90320_WAIT_DELAY_US - delta);
+}
+
+static int ucd90320_read_word_data(struct i2c_client *client, int page,
+ int phase, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct ucd9000_data *data = to_ucd9000_data(info);
+
+ if (reg >= PMBUS_VIRT_BASE)
+ return -ENXIO;
+
+ ucd90320_wait(data);
+ return pmbus_read_word_data(client, page, phase, reg);
+}
+
+static int ucd90320_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct ucd9000_data *data = to_ucd9000_data(info);
+
+ ucd90320_wait(data);
+ return pmbus_read_byte_data(client, page, reg);
+}
+
+static int ucd90320_write_word_data(struct i2c_client *client, int page,
+ int reg, u16 word)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct ucd9000_data *data = to_ucd9000_data(info);
+ int ret;
+
+ ucd90320_wait(data);
+ ret = pmbus_write_word_data(client, page, reg, word);
+ data->write_time = ktime_get();
+
+ return ret;
+}
+
+static int ucd90320_write_byte(struct i2c_client *client, int page, u8 value)
+{
+ const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+ struct ucd9000_data *data = to_ucd9000_data(info);
+ int ret;
+
+ ucd90320_wait(data);
+ ret = pmbus_write_byte(client, page, value);
+ data->write_time = ktime_get();
+
+ return ret;
+}
+
static int ucd9000_get_fan_config(struct i2c_client *client, int fan)
{
int fan_config = 0;
@@ -598,6 +668,11 @@ static int ucd9000_probe(struct i2c_client *client)
info->read_byte_data = ucd9000_read_byte_data;
info->func[0] |= PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12
| PMBUS_HAVE_FAN34 | PMBUS_HAVE_STATUS_FAN34;
+ } else if (mid->driver_data == ucd90320) {
+ info->read_byte_data = ucd90320_read_byte_data;
+ info->read_word_data = ucd90320_read_word_data;
+ info->write_byte = ucd90320_write_byte;
+ info->write_word_data = ucd90320_write_word_data;
}
ucd9000_probe_gpio(client, mid, data);
