[SCSI] isci: Fix hard reset timeout conditions.
A hard reset can timeout before or after the last phy in the
port goes away. If after, then notify the OS that the last
phy has failed.
The recovery for the failed hard reset has been removed.
This recovery code was unecessary in that the link would
recover from the failure normally by a new link reset sequence
or hotplug of the remote device.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c
index 8e59c88..bfeb879 100644
--- a/drivers/scsi/isci/port.c
+++ b/drivers/scsi/isci/port.c
@@ -350,6 +350,34 @@
dev_dbg(&ihost->pdev->dev, "Port stop complete\n");
}
+
+static bool is_port_ready_state(enum sci_port_states state)
+{
+ switch (state) {
+ case SCI_PORT_READY:
+ case SCI_PORT_SUB_WAITING:
+ case SCI_PORT_SUB_OPERATIONAL:
+ case SCI_PORT_SUB_CONFIGURING:
+ return true;
+ default:
+ return false;
+ }
+}
+
+/* flag dummy rnc hanling when exiting a ready state */
+static void port_state_machine_change(struct isci_port *iport,
+ enum sci_port_states state)
+{
+ struct sci_base_state_machine *sm = &iport->sm;
+ enum sci_port_states old_state = sm->current_state_id;
+
+ if (is_port_ready_state(old_state) && !is_port_ready_state(state))
+ iport->ready_exit = true;
+
+ sci_change_state(sm, state);
+ iport->ready_exit = false;
+}
+
/**
* isci_port_hard_reset_complete() - This function is called by the sci core
* when the hard reset complete notification has been received.
@@ -368,6 +396,26 @@
/* Save the status of the hard reset from the port. */
isci_port->hard_reset_status = completion_status;
+ if (completion_status != SCI_SUCCESS) {
+
+ /* The reset failed. The port state is now SCI_PORT_FAILED. */
+ if (isci_port->active_phy_mask == 0) {
+
+ /* Generate the link down now to the host, since it
+ * was intercepted by the hard reset state machine when
+ * it really happened.
+ */
+ isci_port_link_down(isci_port->isci_host,
+ &isci_port->isci_host->phys[
+ isci_port->last_active_phy],
+ isci_port);
+ }
+ /* Advance the port state so that link state changes will be
+ * noticed.
+ */
+ port_state_machine_change(isci_port, SCI_PORT_SUB_WAITING);
+
+ }
complete_all(&isci_port->hard_reset_complete);
}
@@ -657,6 +705,8 @@
struct isci_host *ihost = iport->owning_controller;
iport->active_phy_mask &= ~(1 << iphy->phy_index);
+ if (!iport->active_phy_mask)
+ iport->last_active_phy = iphy->phy_index;
iphy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN;
@@ -683,33 +733,6 @@
}
}
-static bool is_port_ready_state(enum sci_port_states state)
-{
- switch (state) {
- case SCI_PORT_READY:
- case SCI_PORT_SUB_WAITING:
- case SCI_PORT_SUB_OPERATIONAL:
- case SCI_PORT_SUB_CONFIGURING:
- return true;
- default:
- return false;
- }
-}
-
-/* flag dummy rnc hanling when exiting a ready state */
-static void port_state_machine_change(struct isci_port *iport,
- enum sci_port_states state)
-{
- struct sci_base_state_machine *sm = &iport->sm;
- enum sci_port_states old_state = sm->current_state_id;
-
- if (is_port_ready_state(old_state) && !is_port_ready_state(state))
- iport->ready_exit = true;
-
- sci_change_state(sm, state);
- iport->ready_exit = false;
-}
-
/**
* sci_port_general_link_up_handler - phy can be assigned to port?
* @sci_port: sci_port object for which has a phy that has gone link up.
@@ -1622,7 +1645,8 @@
iport->logical_port_index = SCIC_SDS_DUMMY_PORT;
iport->physical_port_index = index;
iport->active_phy_mask = 0;
- iport->ready_exit = false;
+ iport->last_active_phy = 0;
+ iport->ready_exit = false;
iport->owning_controller = ihost;
@@ -1676,7 +1700,7 @@
{
unsigned long flags;
enum sci_status status;
- int idx, ret = TMF_RESP_FUNC_COMPLETE;
+ int ret = TMF_RESP_FUNC_COMPLETE;
dev_dbg(&ihost->pdev->dev, "%s: iport = %p\n",
__func__, iport);
@@ -1697,8 +1721,13 @@
"%s: iport = %p; hard reset completion\n",
__func__, iport);
- if (iport->hard_reset_status != SCI_SUCCESS)
+ if (iport->hard_reset_status != SCI_SUCCESS) {
ret = TMF_RESP_FUNC_FAILED;
+
+ dev_err(&ihost->pdev->dev,
+ "%s: iport = %p; hard reset failed (0x%x)\n",
+ __func__, iport, iport->hard_reset_status);
+ }
} else {
ret = TMF_RESP_FUNC_FAILED;
@@ -1718,18 +1747,6 @@
"%s: iport = %p; hard reset failed "
"(0x%x) - driving explicit link fail for all phys\n",
__func__, iport, iport->hard_reset_status);
-
- /* Down all phys in the port. */
- spin_lock_irqsave(&ihost->scic_lock, flags);
- for (idx = 0; idx < SCI_MAX_PHYS; ++idx) {
- struct isci_phy *iphy = iport->phy_table[idx];
-
- if (!iphy)
- continue;
- sci_phy_stop(iphy);
- sci_phy_start(iphy);
- }
- spin_unlock_irqrestore(&ihost->scic_lock, flags);
}
return ret;
}
diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h
index b50ecd4..e84d22a 100644
--- a/drivers/scsi/isci/port.h
+++ b/drivers/scsi/isci/port.h
@@ -109,6 +109,7 @@
u8 logical_port_index;
u8 physical_port_index;
u8 active_phy_mask;
+ u8 last_active_phy;
u16 reserved_rni;
u16 reserved_tag;
u32 started_request_count;
