// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
// Copyright (C) 2020 Arm Ltd.
// based on the H6 dtsi, which is:
//   Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>

#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun50i-h616-ccu.h>
#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
#include <dt-bindings/clock/sun6i-rtc.h>
#include <dt-bindings/reset/sun50i-h616-ccu.h>
#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
#include <dt-bindings/thermal/thermal.h>

/ {
	interrupt-parent = <&gic>;
	#address-cells = <2>;
	#size-cells = <2>;

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: cpu@0 {
			compatible = "arm,cortex-a53";
			device_type = "cpu";
			reg = <0>;
			enable-method = "psci";
			clocks = <&ccu CLK_CPUX>;
		};

		cpu1: cpu@1 {
			compatible = "arm,cortex-a53";
			device_type = "cpu";
			reg = <1>;
			enable-method = "psci";
			clocks = <&ccu CLK_CPUX>;
		};

		cpu2: cpu@2 {
			compatible = "arm,cortex-a53";
			device_type = "cpu";
			reg = <2>;
			enable-method = "psci";
			clocks = <&ccu CLK_CPUX>;
		};

		cpu3: cpu@3 {
			compatible = "arm,cortex-a53";
			device_type = "cpu";
			reg = <3>;
			enable-method = "psci";
			clocks = <&ccu CLK_CPUX>;
		};
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		/*
		 * 256 KiB reserved for Trusted Firmware-A (BL31).
		 * This is added by BL31 itself, but some bootloaders fail
		 * to propagate this into the DTB handed to kernels.
		 */
		secmon@40000000 {
			reg = <0x0 0x40000000 0x0 0x40000>;
			no-map;
		};
	};

	osc24M: osc24M-clk {
		#clock-cells = <0>;
		compatible = "fixed-clock";
		clock-frequency = <24000000>;
		clock-output-names = "osc24M";
	};

	pmu {
		compatible = "arm,cortex-a53-pmu";
		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
	};

	psci {
		compatible = "arm,psci-0.2";
		method = "smc";
	};

	timer {
		compatible = "arm,armv8-timer";
		arm,no-tick-in-suspend;
		interrupts = <GIC_PPI 13
			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
			     <GIC_PPI 14
			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
			     <GIC_PPI 11
			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
			     <GIC_PPI 10
			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
	};

	soc {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0x0 0x0 0x0 0x40000000>;

		syscon: syscon@3000000 {
			compatible = "allwinner,sun50i-h616-system-control";
			reg = <0x03000000 0x1000>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;

			sram_c: sram@28000 {
				compatible = "mmio-sram";
				reg = <0x00028000 0x30000>;
				#address-cells = <1>;
				#size-cells = <1>;
				ranges = <0 0x00028000 0x30000>;
			};
		};

		ccu: clock@3001000 {
			compatible = "allwinner,sun50i-h616-ccu";
			reg = <0x03001000 0x1000>;
			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>;
			clock-names = "hosc", "losc", "iosc";
			#clock-cells = <1>;
			#reset-cells = <1>;
		};

		dma: dma-controller@3002000 {
			compatible = "allwinner,sun50i-h616-dma",
				     "allwinner,sun50i-a100-dma";
			reg = <0x03002000 0x1000>;
			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
			clock-names = "bus", "mbus";
			dma-channels = <16>;
			dma-requests = <49>;
			resets = <&ccu RST_BUS_DMA>;
			#dma-cells = <1>;
		};

		sid: efuse@3006000 {
			compatible = "allwinner,sun50i-h616-sid", "allwinner,sun50i-a64-sid";
			reg = <0x03006000 0x1000>;
			#address-cells = <1>;
			#size-cells = <1>;

			ths_calibration: thermal-sensor-calibration@14 {
				reg = <0x14 0x8>;
			};
		};

		watchdog: watchdog@30090a0 {
			compatible = "allwinner,sun50i-h616-wdt",
				     "allwinner,sun6i-a31-wdt";
			reg = <0x030090a0 0x20>;
			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&osc24M>;
		};

		pio: pinctrl@300b000 {
			compatible = "allwinner,sun50i-h616-pinctrl";
			reg = <0x0300b000 0x400>;
			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
			clock-names = "apb", "hosc", "losc";
			gpio-controller;
			#gpio-cells = <3>;
			interrupt-controller;
			#interrupt-cells = <3>;

			ext_rgmii_pins: rgmii-pins {
				pins = "PI0", "PI1", "PI2", "PI3", "PI4",
				       "PI5", "PI7", "PI8", "PI9", "PI10",
				       "PI11", "PI12", "PI13", "PI14", "PI15",
				       "PI16";
				function = "emac0";
				drive-strength = <40>;
			};

			i2c0_pins: i2c0-pins {
				pins = "PI6", "PI7";
				function = "i2c0";
			};

			i2c3_ph_pins: i2c3-ph-pins {
				pins = "PH4", "PH5";
				function = "i2c3";
			};

			ir_rx_pin: ir-rx-pin {
				pins = "PH10";
				function = "ir_rx";
			};

			mmc0_pins: mmc0-pins {
				pins = "PF0", "PF1", "PF2", "PF3",
				       "PF4", "PF5";
				function = "mmc0";
				drive-strength = <30>;
				bias-pull-up;
			};

			/omit-if-no-ref/
			mmc1_pins: mmc1-pins {
				pins = "PG0", "PG1", "PG2", "PG3",
				       "PG4", "PG5";
				function = "mmc1";
				drive-strength = <30>;
				bias-pull-up;
			};

			mmc2_pins: mmc2-pins {
				pins = "PC0", "PC1", "PC5", "PC6",
				       "PC8", "PC9", "PC10", "PC11",
				       "PC13", "PC14", "PC15", "PC16";
				function = "mmc2";
				drive-strength = <30>;
				bias-pull-up;
			};

			/omit-if-no-ref/
			spi0_pins: spi0-pins {
				pins = "PC0", "PC2", "PC4";
				function = "spi0";
			};

			/omit-if-no-ref/
			spi0_cs0_pin: spi0-cs0-pin {
				pins = "PC3";
				function = "spi0";
			};

			/omit-if-no-ref/
			spi1_pins: spi1-pins {
				pins = "PH6", "PH7", "PH8";
				function = "spi1";
			};

			/omit-if-no-ref/
			spi1_cs0_pin: spi1-cs0-pin {
				pins = "PH5";
				function = "spi1";
			};

			spdif_tx_pin: spdif-tx-pin {
				pins = "PH4";
				function = "spdif";
			};

			uart0_ph_pins: uart0-ph-pins {
				pins = "PH0", "PH1";
				function = "uart0";
			};

			/omit-if-no-ref/
			uart1_pins: uart1-pins {
				pins = "PG6", "PG7";
				function = "uart1";
			};

			/omit-if-no-ref/
			uart1_rts_cts_pins: uart1-rts-cts-pins {
				pins = "PG8", "PG9";
				function = "uart1";
			};

			/omit-if-no-ref/
			x32clk_fanout_pin: x32clk-fanout-pin {
				pins = "PG10";
				function = "clock";
			};
		};

		gic: interrupt-controller@3021000 {
			compatible = "arm,gic-400";
			reg = <0x03021000 0x1000>,
			      <0x03022000 0x2000>,
			      <0x03024000 0x2000>,
			      <0x03026000 0x2000>;
			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
			interrupt-controller;
			#interrupt-cells = <3>;
		};

		mmc0: mmc@4020000 {
			compatible = "allwinner,sun50i-h616-mmc",
				     "allwinner,sun50i-a100-mmc";
			reg = <0x04020000 0x1000>;
			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
			clock-names = "ahb", "mmc";
			resets = <&ccu RST_BUS_MMC0>;
			reset-names = "ahb";
			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
			pinctrl-names = "default";
			pinctrl-0 = <&mmc0_pins>;
			status = "disabled";
			max-frequency = <150000000>;
			cap-sd-highspeed;
			cap-mmc-highspeed;
			mmc-ddr-3_3v;
			cap-sdio-irq;
			#address-cells = <1>;
			#size-cells = <0>;
		};

		mmc1: mmc@4021000 {
			compatible = "allwinner,sun50i-h616-mmc",
				     "allwinner,sun50i-a100-mmc";
			reg = <0x04021000 0x1000>;
			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
			clock-names = "ahb", "mmc";
			resets = <&ccu RST_BUS_MMC1>;
			reset-names = "ahb";
			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
			pinctrl-names = "default";
			pinctrl-0 = <&mmc1_pins>;
			status = "disabled";
			max-frequency = <150000000>;
			cap-sd-highspeed;
			cap-mmc-highspeed;
			mmc-ddr-3_3v;
			cap-sdio-irq;
			#address-cells = <1>;
			#size-cells = <0>;
		};

		mmc2: mmc@4022000 {
			compatible = "allwinner,sun50i-h616-emmc",
				     "allwinner,sun50i-a100-emmc";
			reg = <0x04022000 0x1000>;
			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
			clock-names = "ahb", "mmc";
			resets = <&ccu RST_BUS_MMC2>;
			reset-names = "ahb";
			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
			pinctrl-names = "default";
			pinctrl-0 = <&mmc2_pins>;
			status = "disabled";
			max-frequency = <150000000>;
			cap-sd-highspeed;
			cap-mmc-highspeed;
			mmc-ddr-3_3v;
			cap-sdio-irq;
			#address-cells = <1>;
			#size-cells = <0>;
		};

		uart0: serial@5000000 {
			compatible = "snps,dw-apb-uart";
			reg = <0x05000000 0x400>;
			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
			reg-shift = <2>;
			reg-io-width = <4>;
			clocks = <&ccu CLK_BUS_UART0>;
			dmas = <&dma 14>, <&dma 14>;
			dma-names = "tx", "rx";
			resets = <&ccu RST_BUS_UART0>;
			status = "disabled";
		};

		uart1: serial@5000400 {
			compatible = "snps,dw-apb-uart";
			reg = <0x05000400 0x400>;
			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
			reg-shift = <2>;
			reg-io-width = <4>;
			clocks = <&ccu CLK_BUS_UART1>;
			dmas = <&dma 15>, <&dma 15>;
			dma-names = "tx", "rx";
			resets = <&ccu RST_BUS_UART1>;
			status = "disabled";
		};

		uart2: serial@5000800 {
			compatible = "snps,dw-apb-uart";
			reg = <0x05000800 0x400>;
			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
			reg-shift = <2>;
			reg-io-width = <4>;
			clocks = <&ccu CLK_BUS_UART2>;
			dmas = <&dma 16>, <&dma 16>;
			dma-names = "tx", "rx";
			resets = <&ccu RST_BUS_UART2>;
			status = "disabled";
		};

		uart3: serial@5000c00 {
			compatible = "snps,dw-apb-uart";
			reg = <0x05000c00 0x400>;
			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
			reg-shift = <2>;
			reg-io-width = <4>;
			clocks = <&ccu CLK_BUS_UART3>;
			dmas = <&dma 17>, <&dma 17>;
			dma-names = "tx", "rx";
			resets = <&ccu RST_BUS_UART3>;
			status = "disabled";
		};

		uart4: serial@5001000 {
			compatible = "snps,dw-apb-uart";
			reg = <0x05001000 0x400>;
			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
			reg-shift = <2>;
			reg-io-width = <4>;
			clocks = <&ccu CLK_BUS_UART4>;
			dmas = <&dma 18>, <&dma 18>;
			dma-names = "tx", "rx";
			resets = <&ccu RST_BUS_UART4>;
			status = "disabled";
		};

		uart5: serial@5001400 {
			compatible = "snps,dw-apb-uart";
			reg = <0x05001400 0x400>;
			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
			reg-shift = <2>;
			reg-io-width = <4>;
			clocks = <&ccu CLK_BUS_UART5>;
			dmas = <&dma 19>, <&dma 19>;
			dma-names = "tx", "rx";
			resets = <&ccu RST_BUS_UART5>;
			status = "disabled";
		};

		i2c0: i2c@5002000 {
			compatible = "allwinner,sun50i-h616-i2c",
				     "allwinner,sun8i-v536-i2c",
				     "allwinner,sun6i-a31-i2c";
			reg = <0x05002000 0x400>;
			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&ccu CLK_BUS_I2C0>;
			dmas = <&dma 43>, <&dma 43>;
			dma-names = "rx", "tx";
			resets = <&ccu RST_BUS_I2C0>;
			pinctrl-names = "default";
			pinctrl-0 = <&i2c0_pins>;
			status = "disabled";
			#address-cells = <1>;
			#size-cells = <0>;
		};

		i2c1: i2c@5002400 {
			compatible = "allwinner,sun50i-h616-i2c",
				     "allwinner,sun8i-v536-i2c",
				     "allwinner,sun6i-a31-i2c";
			reg = <0x05002400 0x400>;
			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&ccu CLK_BUS_I2C1>;
			dmas = <&dma 44>, <&dma 44>;
			dma-names = "rx", "tx";
			resets = <&ccu RST_BUS_I2C1>;
			status = "disabled";
			#address-cells = <1>;
			#size-cells = <0>;
		};

		i2c2: i2c@5002800 {
			compatible = "allwinner,sun50i-h616-i2c",
				     "allwinner,sun8i-v536-i2c",
				     "allwinner,sun6i-a31-i2c";
			reg = <0x05002800 0x400>;
			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&ccu CLK_BUS_I2C2>;
			dmas = <&dma 45>, <&dma 45>;
			dma-names = "rx", "tx";
			resets = <&ccu RST_BUS_I2C2>;
			status = "disabled";
			#address-cells = <1>;
			#size-cells = <0>;
		};

		i2c3: i2c@5002c00 {
			compatible = "allwinner,sun50i-h616-i2c",
				     "allwinner,sun8i-v536-i2c",
				     "allwinner,sun6i-a31-i2c";
			reg = <0x05002c00 0x400>;
			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&ccu CLK_BUS_I2C3>;
			dmas = <&dma 46>, <&dma 46>;
			dma-names = "rx", "tx";
			resets = <&ccu RST_BUS_I2C3>;
			status = "disabled";
			#address-cells = <1>;
			#size-cells = <0>;
		};

		i2c4: i2c@5003000 {
			compatible = "allwinner,sun50i-h616-i2c",
				     "allwinner,sun8i-v536-i2c",
				     "allwinner,sun6i-a31-i2c";
			reg = <0x05003000 0x400>;
			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&ccu CLK_BUS_I2C4>;
			dmas = <&dma 47>, <&dma 47>;
			dma-names = "rx", "tx";
			resets = <&ccu RST_BUS_I2C4>;
			status = "disabled";
			#address-cells = <1>;
			#size-cells = <0>;
		};

		spi0: spi@5010000 {
			compatible = "allwinner,sun50i-h616-spi",
				     "allwinner,sun8i-h3-spi";
			reg = <0x05010000 0x1000>;
			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
			clock-names = "ahb", "mod";
			dmas = <&dma 22>, <&dma 22>;
			dma-names = "rx", "tx";
			resets = <&ccu RST_BUS_SPI0>;
			status = "disabled";
			#address-cells = <1>;
			#size-cells = <0>;
		};

		spi1: spi@5011000 {
			compatible = "allwinner,sun50i-h616-spi",
				     "allwinner,sun8i-h3-spi";
			reg = <0x05011000 0x1000>;
			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
			clock-names = "ahb", "mod";
			dmas = <&dma 23>, <&dma 23>;
			dma-names = "rx", "tx";
			resets = <&ccu RST_BUS_SPI1>;
			status = "disabled";
			#address-cells = <1>;
			#size-cells = <0>;
		};

		emac0: ethernet@5020000 {
			compatible = "allwinner,sun50i-h616-emac0",
				     "allwinner,sun50i-a64-emac";
			reg = <0x05020000 0x10000>;
			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "macirq";
			clocks = <&ccu CLK_BUS_EMAC0>;
			clock-names = "stmmaceth";
			resets = <&ccu RST_BUS_EMAC0>;
			reset-names = "stmmaceth";
			syscon = <&syscon>;
			status = "disabled";

			mdio0: mdio {
				compatible = "snps,dwmac-mdio";
				#address-cells = <1>;
				#size-cells = <0>;
			};
		};

		spdif: spdif@5093000 {
			compatible = "allwinner,sun50i-h616-spdif";
			reg = <0x05093000 0x400>;
			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>;
			clock-names = "apb", "spdif";
			resets = <&ccu RST_BUS_SPDIF>;
			dmas = <&dma 2>;
			dma-names = "tx";
			pinctrl-names = "default";
			pinctrl-0 = <&spdif_tx_pin>;
			#sound-dai-cells = <0>;
			status = "disabled";
		};

		ths: thermal-sensor@5070400 {
			compatible = "allwinner,sun50i-h616-ths";
			reg = <0x05070400 0x400>;
			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&ccu CLK_BUS_THS>;
			clock-names = "bus";
			resets = <&ccu RST_BUS_THS>;
			nvmem-cells = <&ths_calibration>;
			nvmem-cell-names = "calibration";
			allwinner,sram = <&syscon>;
			#thermal-sensor-cells = <1>;
		};

		usbotg: usb@5100000 {
			compatible = "allwinner,sun50i-h616-musb",
				     "allwinner,sun8i-h3-musb";
			reg = <0x05100000 0x0400>;
			clocks = <&ccu CLK_BUS_OTG>;
			resets = <&ccu RST_BUS_OTG>;
			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "mc";
			phys = <&usbphy 0>;
			phy-names = "usb";
			extcon = <&usbphy 0>;
			status = "disabled";
		};

		usbphy: phy@5100400 {
			compatible = "allwinner,sun50i-h616-usb-phy";
			reg = <0x05100400 0x24>,
			      <0x05101800 0x14>,
			      <0x05200800 0x14>,
			      <0x05310800 0x14>,
			      <0x05311800 0x14>;
			reg-names = "phy_ctrl",
				    "pmu0",
				    "pmu1",
				    "pmu2",
				    "pmu3";
			clocks = <&ccu CLK_USB_PHY0>,
				 <&ccu CLK_USB_PHY1>,
				 <&ccu CLK_USB_PHY2>,
				 <&ccu CLK_USB_PHY3>,
				 <&ccu CLK_BUS_EHCI2>;
			clock-names = "usb0_phy",
				      "usb1_phy",
				      "usb2_phy",
				      "usb3_phy",
				      "pmu2_clk";
			resets = <&ccu RST_USB_PHY0>,
				 <&ccu RST_USB_PHY1>,
				 <&ccu RST_USB_PHY2>,
				 <&ccu RST_USB_PHY3>;
			reset-names = "usb0_reset",
				      "usb1_reset",
				      "usb2_reset",
				      "usb3_reset";
			status = "disabled";
			#phy-cells = <1>;
		};

		ehci0: usb@5101000 {
			compatible = "allwinner,sun50i-h616-ehci",
				     "generic-ehci";
			reg = <0x05101000 0x100>;
			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&ccu CLK_BUS_OHCI0>,
				 <&ccu CLK_BUS_EHCI0>,
				 <&ccu CLK_USB_OHCI0>;
			resets = <&ccu RST_BUS_OHCI0>,
				 <&ccu RST_BUS_EHCI0>;
			phys = <&usbphy 0>;
			phy-names = "usb";
			status = "disabled";
		};

		ohci0: usb@5101400 {
			compatible = "allwinner,sun50i-h616-ohci",
				     "generic-ohci";
			reg = <0x05101400 0x100>;
			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&ccu CLK_BUS_OHCI0>,
				 <&ccu CLK_USB_OHCI0>;
			resets = <&ccu RST_BUS_OHCI0>;
			phys = <&usbphy 0>;
			phy-names = "usb";
			status = "disabled";
		};

		ehci1: usb@5200000 {
			compatible = "allwinner,sun50i-h616-ehci",
				     "generic-ehci";
			reg = <0x05200000 0x100>;
			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&ccu CLK_BUS_OHCI1>,
				 <&ccu CLK_BUS_EHCI1>,
				 <&ccu CLK_USB_OHCI1>;
			resets = <&ccu RST_BUS_OHCI1>,
				 <&ccu RST_BUS_EHCI1>;
			phys = <&usbphy 1>;
			phy-names = "usb";
			status = "disabled";
		};

		ohci1: usb@5200400 {
			compatible = "allwinner,sun50i-h616-ohci",
				     "generic-ohci";
			reg = <0x05200400 0x100>;
			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&ccu CLK_BUS_OHCI1>,
				 <&ccu CLK_USB_OHCI1>;
			resets = <&ccu RST_BUS_OHCI1>;
			phys = <&usbphy 1>;
			phy-names = "usb";
			status = "disabled";
		};

		ehci2: usb@5310000 {
			compatible = "allwinner,sun50i-h616-ehci",
				     "generic-ehci";
			reg = <0x05310000 0x100>;
			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&ccu CLK_BUS_OHCI2>,
				 <&ccu CLK_BUS_EHCI2>,
				 <&ccu CLK_USB_OHCI2>;
			resets = <&ccu RST_BUS_OHCI2>,
				 <&ccu RST_BUS_EHCI2>;
			phys = <&usbphy 2>;
			phy-names = "usb";
			status = "disabled";
		};

		ohci2: usb@5310400 {
			compatible = "allwinner,sun50i-h616-ohci",
				     "generic-ohci";
			reg = <0x05310400 0x100>;
			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&ccu CLK_BUS_OHCI2>,
				 <&ccu CLK_USB_OHCI2>;
			resets = <&ccu RST_BUS_OHCI2>;
			phys = <&usbphy 2>;
			phy-names = "usb";
			status = "disabled";
		};

		ehci3: usb@5311000 {
			compatible = "allwinner,sun50i-h616-ehci",
				     "generic-ehci";
			reg = <0x05311000 0x100>;
			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&ccu CLK_BUS_OHCI3>,
				 <&ccu CLK_BUS_EHCI3>,
				 <&ccu CLK_USB_OHCI3>;
			resets = <&ccu RST_BUS_OHCI3>,
				 <&ccu RST_BUS_EHCI3>;
			phys = <&usbphy 3>;
			phy-names = "usb";
			status = "disabled";
		};

		ohci3: usb@5311400 {
			compatible = "allwinner,sun50i-h616-ohci",
				     "generic-ohci";
			reg = <0x05311400 0x100>;
			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&ccu CLK_BUS_OHCI3>,
				 <&ccu CLK_USB_OHCI3>;
			resets = <&ccu RST_BUS_OHCI3>;
			phys = <&usbphy 3>;
			phy-names = "usb";
			status = "disabled";
		};

		rtc: rtc@7000000 {
			compatible = "allwinner,sun50i-h616-rtc";
			reg = <0x07000000 0x400>;
			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&r_ccu CLK_R_APB1_RTC>, <&osc24M>,
				 <&ccu CLK_PLL_SYSTEM_32K>;
			clock-names = "bus", "hosc",
				      "pll-32k";
			#clock-cells = <1>;
		};

		r_ccu: clock@7010000 {
			compatible = "allwinner,sun50i-h616-r-ccu";
			reg = <0x07010000 0x210>;
			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
				 <&ccu CLK_PLL_PERIPH0>;
			clock-names = "hosc", "losc", "iosc", "pll-periph";
			#clock-cells = <1>;
			#reset-cells = <1>;
		};

		r_pio: pinctrl@7022000 {
			compatible = "allwinner,sun50i-h616-r-pinctrl";
			reg = <0x07022000 0x400>;
			clocks = <&r_ccu CLK_R_APB1>, <&osc24M>,
				 <&rtc CLK_OSC32K>;
			clock-names = "apb", "hosc", "losc";
			gpio-controller;
			#gpio-cells = <3>;

			/omit-if-no-ref/
			r_i2c_pins: r-i2c-pins {
				pins = "PL0", "PL1";
				function = "s_i2c";
			};

			r_rsb_pins: r-rsb-pins {
				pins = "PL0", "PL1";
				function = "s_rsb";
			};
		};

		ir: ir@7040000 {
			compatible = "allwinner,sun50i-h616-ir",
				     "allwinner,sun6i-a31-ir";
			reg = <0x07040000 0x400>;
			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&r_ccu CLK_R_APB1_IR>,
				 <&r_ccu CLK_IR>;
			clock-names = "apb", "ir";
			resets = <&r_ccu RST_R_APB1_IR>;
			pinctrl-names = "default";
			pinctrl-0 = <&ir_rx_pin>;
			status = "disabled";
		};

		r_i2c: i2c@7081400 {
			compatible = "allwinner,sun50i-h616-i2c",
				     "allwinner,sun8i-v536-i2c",
				     "allwinner,sun6i-a31-i2c";
			reg = <0x07081400 0x400>;
			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&r_ccu CLK_R_APB2_I2C>;
			dmas = <&dma 48>, <&dma 48>;
			dma-names = "rx", "tx";
			resets = <&r_ccu RST_R_APB2_I2C>;
			status = "disabled";
			#address-cells = <1>;
			#size-cells = <0>;
		};

		r_rsb: rsb@7083000 {
			compatible = "allwinner,sun50i-h616-rsb",
				     "allwinner,sun8i-a23-rsb";
			reg = <0x07083000 0x400>;
			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&r_ccu CLK_R_APB2_RSB>;
			clock-frequency = <3000000>;
			resets = <&r_ccu RST_R_APB2_RSB>;
			pinctrl-names = "default";
			pinctrl-0 = <&r_rsb_pins>;
			status = "disabled";
			#address-cells = <1>;
			#size-cells = <0>;
		};
	};

	thermal-zones {
		cpu-thermal {
			polling-delay-passive = <500>;
			polling-delay = <1000>;
			thermal-sensors = <&ths 2>;
			sustainable-power = <1000>;

			trips {
				cpu_threshold: cpu-trip-0 {
					temperature = <60000>;
					type = "passive";
					hysteresis = <0>;
				};
				cpu_target: cpu-trip-1 {
					temperature = <70000>;
					type = "passive";
					hysteresis = <0>;
				};
				cpu_critical: cpu-trip-2 {
					temperature = <110000>;
					type = "critical";
					hysteresis = <0>;
				};
			};
		};

		gpu-thermal {
			polling-delay-passive = <500>;
			polling-delay = <1000>;
			thermal-sensors = <&ths 0>;
			sustainable-power = <1100>;

			trips {
				gpu_temp_critical: gpu-trip-0 {
					temperature = <110000>;
					type = "critical";
					hysteresis = <0>;
				};
			};
		};

		ve-thermal {
			polling-delay-passive = <0>;
			polling-delay = <0>;
			thermal-sensors = <&ths 1>;

			trips {
				ve_temp_critical: ve-trip-0 {
					temperature = <110000>;
					type = "critical";
					hysteresis = <0>;
				};
			};
		};

		ddr-thermal {
			polling-delay-passive = <0>;
			polling-delay = <0>;
			thermal-sensors = <&ths 3>;

			trips {
				ddr_temp_critical: ddr-trip-0 {
					temperature = <110000>;
					type = "critical";
					hysteresis = <0>;
				};
			};
		};
	};
};