diff --git a/Documentation/PCI/pci-error-recovery.txt b/Documentation/PCI/pci-error-recovery.txt
index ac26869..da3b217 100644
--- a/Documentation/PCI/pci-error-recovery.txt
+++ b/Documentation/PCI/pci-error-recovery.txt
@@ -78,7 +78,6 @@
 {
 	int (*error_detected)(struct pci_dev *dev, enum pci_channel_state);
 	int (*mmio_enabled)(struct pci_dev *dev);
-	int (*link_reset)(struct pci_dev *dev);
 	int (*slot_reset)(struct pci_dev *dev);
 	void (*resume)(struct pci_dev *dev);
 };
@@ -104,8 +103,7 @@
 is not implemented, the corresponding feature is considered unsupported.
 For example, if mmio_enabled() and resume() aren't there, then it
 is assumed that the driver is not doing any direct recovery and requires
-a slot reset. If link_reset() is not implemented, the card is assumed to
-not care about link resets. Typically a driver will want to know about
+a slot reset.  Typically a driver will want to know about
 a slot_reset().
 
 The actual steps taken by a platform to recover from a PCI error
@@ -232,25 +230,9 @@
 
 STEP 3: Link Reset
 ------------------
-The platform resets the link, and then calls the link_reset() callback
-on all affected device drivers.  This is a PCI-Express specific state
+The platform resets the link.  This is a PCI-Express specific step
 and is done whenever a non-fatal error has been detected that can be
-"solved" by resetting the link. This call informs the driver of the
-reset and the driver should check to see if the device appears to be
-in working condition.
-
-The driver is not supposed to restart normal driver I/O operations
-at this point.  It should limit itself to "probing" the device to
-check its recoverability status. If all is right, then the platform
-will call resume() once all drivers have ack'd link_reset().
-
-	Result codes:
-		(identical to STEP 3 (MMIO Enabled)
-
-The platform then proceeds to either STEP 4 (Slot Reset) or STEP 5
-(Resume Operations).
-
->>> The current powerpc implementation does not implement this callback.
+"solved" by resetting the link.
 
 STEP 4: Slot Reset
 ------------------
diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
index a6a4cea..2944353 100644
--- a/drivers/acpi/pci_mcfg.c
+++ b/drivers/acpi/pci_mcfg.c
@@ -195,11 +195,10 @@ int pci_mcfg_lookup(struct acpi_pci_root *root, struct resource *cfgres,
 		goto skip_lookup;
 
 	/*
-	 * We expect exact match, unless MCFG entry end bus covers more than
-	 * specified by caller.
+	 * We expect the range in bus_res in the coverage of MCFG bus range.
 	 */
 	list_for_each_entry(e, &pci_mcfg_list, list) {
-		if (e->segment == seg && e->bus_start == bus_res->start &&
+		if (e->segment == seg && e->bus_start <= bus_res->start &&
 		    e->bus_end >= bus_res->end) {
 			root->mcfg_addr = e->addr;
 		}
diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c
index 4ac8f33..ebd941f 100644
--- a/drivers/infiniband/hw/hfi1/pcie.c
+++ b/drivers/infiniband/hw/hfi1/pcie.c
@@ -598,15 +598,6 @@ pci_slot_reset(struct pci_dev *pdev)
 	return PCI_ERS_RESULT_CAN_RECOVER;
 }
 
-static pci_ers_result_t
-pci_link_reset(struct pci_dev *pdev)
-{
-	struct hfi1_devdata *dd = pci_get_drvdata(pdev);
-
-	dd_dev_info(dd, "HFI1 link_reset function called, ignored\n");
-	return PCI_ERS_RESULT_CAN_RECOVER;
-}
-
 static void
 pci_resume(struct pci_dev *pdev)
 {
@@ -625,7 +616,6 @@ pci_resume(struct pci_dev *pdev)
 const struct pci_error_handlers hfi1_pci_err_handler = {
 	.error_detected = pci_error_detected,
 	.mmio_enabled = pci_mmio_enabled,
-	.link_reset = pci_link_reset,
 	.slot_reset = pci_slot_reset,
 	.resume = pci_resume,
 };
diff --git a/drivers/infiniband/hw/qib/qib_pcie.c b/drivers/infiniband/hw/qib/qib_pcie.c
index 6abe1c6..c379b83 100644
--- a/drivers/infiniband/hw/qib/qib_pcie.c
+++ b/drivers/infiniband/hw/qib/qib_pcie.c
@@ -682,13 +682,6 @@ qib_pci_slot_reset(struct pci_dev *pdev)
 	return PCI_ERS_RESULT_CAN_RECOVER;
 }
 
-static pci_ers_result_t
-qib_pci_link_reset(struct pci_dev *pdev)
-{
-	qib_devinfo(pdev, "QIB link_reset function called, ignored\n");
-	return PCI_ERS_RESULT_CAN_RECOVER;
-}
-
 static void
 qib_pci_resume(struct pci_dev *pdev)
 {
@@ -707,7 +700,6 @@ qib_pci_resume(struct pci_dev *pdev)
 const struct pci_error_handlers qib_pci_err_handler = {
 	.error_detected = qib_pci_error_detected,
 	.mmio_enabled = qib_pci_mmio_enabled,
-	.link_reset = qib_pci_link_reset,
 	.slot_reset = qib_pci_slot_reset,
 	.resume = qib_pci_resume,
 };
diff --git a/drivers/media/pci/ngene/ngene-cards.c b/drivers/media/pci/ngene/ngene-cards.c
index 423e8c8..8438c1c 100644
--- a/drivers/media/pci/ngene/ngene-cards.c
+++ b/drivers/media/pci/ngene/ngene-cards.c
@@ -781,12 +781,6 @@ static pci_ers_result_t ngene_error_detected(struct pci_dev *dev,
 	return PCI_ERS_RESULT_CAN_RECOVER;
 }
 
-static pci_ers_result_t ngene_link_reset(struct pci_dev *dev)
-{
-	printk(KERN_INFO DEVICE_NAME ": link reset\n");
-	return 0;
-}
-
 static pci_ers_result_t ngene_slot_reset(struct pci_dev *dev)
 {
 	printk(KERN_INFO DEVICE_NAME ": slot reset\n");
@@ -800,7 +794,6 @@ static void ngene_resume(struct pci_dev *dev)
 
 static const struct pci_error_handlers ngene_errors = {
 	.error_detected = ngene_error_detected,
-	.link_reset = ngene_link_reset,
 	.slot_reset = ngene_slot_reset,
 	.resume = ngene_resume,
 };
diff --git a/drivers/misc/genwqe/card_base.c b/drivers/misc/genwqe/card_base.c
index 6c1f49a..4fd21e8 100644
--- a/drivers/misc/genwqe/card_base.c
+++ b/drivers/misc/genwqe/card_base.c
@@ -1336,7 +1336,6 @@ static int genwqe_sriov_configure(struct pci_dev *dev, int numvfs)
 static struct pci_error_handlers genwqe_err_handler = {
 	.error_detected = genwqe_err_error_detected,
 	.mmio_enabled	= genwqe_err_result_none,
-	.link_reset	= genwqe_err_result_none,
 	.slot_reset	= genwqe_err_slot_reset,
 	.resume		= genwqe_err_resume,
 };
diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index db23954..68bd720 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -684,8 +684,9 @@ void pci_cfg_access_unlock(struct pci_dev *dev)
 	WARN_ON(!dev->block_cfg_access);
 
 	dev->block_cfg_access = 0;
-	wake_up_all(&pci_cfg_wait);
 	raw_spin_unlock_irqrestore(&pci_lock, flags);
+
+	wake_up_all(&pci_cfg_wait);
 }
 EXPORT_SYMBOL_GPL(pci_cfg_access_unlock);
 
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 1ccce1c..3e0516e 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -381,8 +381,6 @@ static int __pci_device_probe(struct pci_driver *drv, struct pci_dev *pci_dev)
 		id = pci_match_device(drv, pci_dev);
 		if (id)
 			error = pci_call_probe(drv, pci_dev, id);
-		if (error >= 0)
-			error = 0;
 	}
 	return error;
 }
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 7ce7763..ac53edb 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -71,6 +71,14 @@
 	  Enable PCI Express ASPM L0s and L1 where possible, even if the
 	  BIOS did not.
 
+config PCIEASPM_POWER_SUPERSAVE
+	bool "Power Supersave"
+	depends on PCIEASPM
+	help
+	  Same as PCIEASPM_POWERSAVE, except it also enables L1 substates where
+	  possible. This would result in higher power savings while staying in L1
+	  where the components support it.
+
 config PCIEASPM_PERFORMANCE
 	bool "Performance"
 	depends on PCIEASPM
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 17ac1dc..a9bcd56 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -30,8 +30,29 @@
 #define ASPM_STATE_L0S_UP	(1)	/* Upstream direction L0s state */
 #define ASPM_STATE_L0S_DW	(2)	/* Downstream direction L0s state */
 #define ASPM_STATE_L1		(4)	/* L1 state */
+#define ASPM_STATE_L1_1		(8)	/* ASPM L1.1 state */
+#define ASPM_STATE_L1_2		(0x10)	/* ASPM L1.2 state */
+#define ASPM_STATE_L1_1_PCIPM	(0x20)	/* PCI PM L1.1 state */
+#define ASPM_STATE_L1_2_PCIPM	(0x40)	/* PCI PM L1.2 state */
+#define ASPM_STATE_L1_SS_PCIPM	(ASPM_STATE_L1_1_PCIPM | ASPM_STATE_L1_2_PCIPM)
+#define ASPM_STATE_L1_2_MASK	(ASPM_STATE_L1_2 | ASPM_STATE_L1_2_PCIPM)
+#define ASPM_STATE_L1SS		(ASPM_STATE_L1_1 | ASPM_STATE_L1_1_PCIPM |\
+				 ASPM_STATE_L1_2_MASK)
 #define ASPM_STATE_L0S		(ASPM_STATE_L0S_UP | ASPM_STATE_L0S_DW)
-#define ASPM_STATE_ALL		(ASPM_STATE_L0S | ASPM_STATE_L1)
+#define ASPM_STATE_ALL		(ASPM_STATE_L0S | ASPM_STATE_L1 |	\
+				 ASPM_STATE_L1SS)
+
+/*
+ * When L1 substates are enabled, the LTR L1.2 threshold is a timing parameter
+ * that decides whether L1.1 or L1.2 is entered (Refer PCIe spec for details).
+ * Not sure is there is a way to "calculate" this on the fly, but maybe we
+ * could turn it into a parameter in future.  This value has been taken from
+ * the following files from Intel's coreboot (which is the only code I found
+ * to have used this):
+ * https://www.coreboot.org/pipermail/coreboot-gerrit/2015-March/021134.html
+ * https://review.coreboot.org/#/c/8832/
+ */
+#define LTR_L1_2_THRESHOLD_BITS	((1 << 21) | (1 << 23) | (1 << 30))
 
 struct aspm_latency {
 	u32 l0s;			/* L0s latency (nsec) */
@@ -40,6 +61,7 @@ struct aspm_latency {
 
 struct pcie_link_state {
 	struct pci_dev *pdev;		/* Upstream component of the Link */
+	struct pci_dev *downstream;	/* Downstream component, function 0 */
 	struct pcie_link_state *root;	/* pointer to the root port link */
 	struct pcie_link_state *parent;	/* pointer to the parent Link state */
 	struct list_head sibling;	/* node in link_list */
@@ -47,11 +69,11 @@ struct pcie_link_state {
 	struct list_head link;		/* node in parent's children list */
 
 	/* ASPM state */
-	u32 aspm_support:3;		/* Supported ASPM state */
-	u32 aspm_enabled:3;		/* Enabled ASPM state */
-	u32 aspm_capable:3;		/* Capable ASPM state with latency */
-	u32 aspm_default:3;		/* Default ASPM state by BIOS */
-	u32 aspm_disable:3;		/* Disabled ASPM state */
+	u32 aspm_support:7;		/* Supported ASPM state */
+	u32 aspm_enabled:7;		/* Enabled ASPM state */
+	u32 aspm_capable:7;		/* Capable ASPM state with latency */
+	u32 aspm_default:7;		/* Default ASPM state by BIOS */
+	u32 aspm_disable:7;		/* Disabled ASPM state */
 
 	/* Clock PM state */
 	u32 clkpm_capable:1;		/* Clock PM capable? */
@@ -66,6 +88,14 @@ struct pcie_link_state {
 	 * has one slot under it, so at most there are 8 functions.
 	 */
 	struct aspm_latency acceptable[8];
+
+	/* L1 PM Substate info */
+	struct {
+		u32 up_cap_ptr;		/* L1SS cap ptr in upstream dev */
+		u32 dw_cap_ptr;		/* L1SS cap ptr in downstream dev */
+		u32 ctl1;		/* value to be programmed in ctl1 */
+		u32 ctl2;		/* value to be programmed in ctl2 */
+	} l1ss;
 };
 
 static int aspm_disabled, aspm_force;
@@ -76,11 +106,14 @@ static LIST_HEAD(link_list);
 #define POLICY_DEFAULT 0	/* BIOS default setting */
 #define POLICY_PERFORMANCE 1	/* high performance */
 #define POLICY_POWERSAVE 2	/* high power saving */
+#define POLICY_POWER_SUPERSAVE 3 /* possibly even more power saving */
 
 #ifdef CONFIG_PCIEASPM_PERFORMANCE
 static int aspm_policy = POLICY_PERFORMANCE;
 #elif defined CONFIG_PCIEASPM_POWERSAVE
 static int aspm_policy = POLICY_POWERSAVE;
+#elif defined CONFIG_PCIEASPM_POWER_SUPERSAVE
+static int aspm_policy = POLICY_POWER_SUPERSAVE;
 #else
 static int aspm_policy;
 #endif
@@ -88,7 +121,8 @@ static int aspm_policy;
 static const char *policy_str[] = {
 	[POLICY_DEFAULT] = "default",
 	[POLICY_PERFORMANCE] = "performance",
-	[POLICY_POWERSAVE] = "powersave"
+	[POLICY_POWERSAVE] = "powersave",
+	[POLICY_POWER_SUPERSAVE] = "powersupersave"
 };
 
 #define LINK_RETRAIN_TIMEOUT HZ
@@ -101,6 +135,9 @@ static int policy_to_aspm_state(struct pcie_link_state *link)
 		return 0;
 	case POLICY_POWERSAVE:
 		/* Enable ASPM L0s/L1 */
+		return (ASPM_STATE_L0S | ASPM_STATE_L1);
+	case POLICY_POWER_SUPERSAVE:
+		/* Enable Everything */
 		return ASPM_STATE_ALL;
 	case POLICY_DEFAULT:
 		return link->aspm_default;
@@ -115,7 +152,8 @@ static int policy_to_clkpm_state(struct pcie_link_state *link)
 		/* Disable ASPM and Clock PM */
 		return 0;
 	case POLICY_POWERSAVE:
-		/* Disable Clock PM */
+	case POLICY_POWER_SUPERSAVE:
+		/* Enable Clock PM */
 		return 1;
 	case POLICY_DEFAULT:
 		return link->clkpm_default;
@@ -278,11 +316,33 @@ static u32 calc_l1_acceptable(u32 encoding)
 	return (1000 << encoding);
 }
 
+/* Convert L1SS T_pwr encoding to usec */
+static u32 calc_l1ss_pwron(struct pci_dev *pdev, u32 scale, u32 val)
+{
+	switch (scale) {
+	case 0:
+		return val * 2;
+	case 1:
+		return val * 10;
+	case 2:
+		return val * 100;
+	}
+	dev_err(&pdev->dev, "%s: Invalid T_PwrOn scale: %u\n",
+		__func__, scale);
+	return 0;
+}
+
 struct aspm_register_info {
 	u32 support:2;
 	u32 enabled:2;
 	u32 latency_encoding_l0s;
 	u32 latency_encoding_l1;
+
+	/* L1 substates */
+	u32 l1ss_cap_ptr;
+	u32 l1ss_cap;
+	u32 l1ss_ctl1;
+	u32 l1ss_ctl2;
 };
 
 static void pcie_get_aspm_reg(struct pci_dev *pdev,
@@ -297,6 +357,22 @@ static void pcie_get_aspm_reg(struct pci_dev *pdev,
 	info->latency_encoding_l1  = (reg32 & PCI_EXP_LNKCAP_L1EL) >> 15;
 	pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &reg16);
 	info->enabled = reg16 & PCI_EXP_LNKCTL_ASPMC;
+
+	/* Read L1 PM substate capabilities */
+	info->l1ss_cap = info->l1ss_ctl1 = info->l1ss_ctl2 = 0;
+	info->l1ss_cap_ptr = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_L1SS);
+	if (!info->l1ss_cap_ptr)
+		return;
+	pci_read_config_dword(pdev, info->l1ss_cap_ptr + PCI_L1SS_CAP,
+			      &info->l1ss_cap);
+	if (!(info->l1ss_cap & PCI_L1SS_CAP_L1_PM_SS)) {
+		info->l1ss_cap = 0;
+		return;
+	}
+	pci_read_config_dword(pdev, info->l1ss_cap_ptr + PCI_L1SS_CTL1,
+			      &info->l1ss_ctl1);
+	pci_read_config_dword(pdev, info->l1ss_cap_ptr + PCI_L1SS_CTL2,
+			      &info->l1ss_ctl2);
 }
 
 static void pcie_aspm_check_latency(struct pci_dev *endpoint)
@@ -327,6 +403,14 @@ static void pcie_aspm_check_latency(struct pci_dev *endpoint)
 		 * Check L1 latency.
 		 * Every switch on the path to root complex need 1
 		 * more microsecond for L1. Spec doesn't mention L0s.
+		 *
+		 * The exit latencies for L1 substates are not advertised
+		 * by a device.  Since the spec also doesn't mention a way
+		 * to determine max latencies introduced by enabling L1
+		 * substates on the components, it is not clear how to do
+		 * a L1 substate exit latency check.  We assume that the
+		 * L1 exit latencies advertised by a device include L1
+		 * substate latencies (and hence do not do any check).
 		 */
 		latency = max_t(u32, link->latency_up.l1, link->latency_dw.l1);
 		if ((link->aspm_capable & ASPM_STATE_L1) &&
@@ -338,6 +422,60 @@ static void pcie_aspm_check_latency(struct pci_dev *endpoint)
 	}
 }
 
+/*
+ * The L1 PM substate capability is only implemented in function 0 in a
+ * multi function device.
+ */
+static struct pci_dev *pci_function_0(struct pci_bus *linkbus)
+{
+	struct pci_dev *child;
+
+	list_for_each_entry(child, &linkbus->devices, bus_list)
+		if (PCI_FUNC(child->devfn) == 0)
+			return child;
+	return NULL;
+}
+
+/* Calculate L1.2 PM substate timing parameters */
+static void aspm_calc_l1ss_info(struct pcie_link_state *link,
+				struct aspm_register_info *upreg,
+				struct aspm_register_info *dwreg)
+{
+	u32 val1, val2, scale1, scale2;
+
+	link->l1ss.up_cap_ptr = upreg->l1ss_cap_ptr;
+	link->l1ss.dw_cap_ptr = dwreg->l1ss_cap_ptr;
+	link->l1ss.ctl1 = link->l1ss.ctl2 = 0;
+
+	if (!(link->aspm_support & ASPM_STATE_L1_2_MASK))
+		return;
+
+	/* Choose the greater of the two T_cmn_mode_rstr_time */
+	val1 = (upreg->l1ss_cap >> 8) & 0xFF;
+	val2 = (upreg->l1ss_cap >> 8) & 0xFF;
+	if (val1 > val2)
+		link->l1ss.ctl1 |= val1 << 8;
+	else
+		link->l1ss.ctl1 |= val2 << 8;
+	/*
+	 * We currently use LTR L1.2 threshold to be fixed constant picked from
+	 * Intel's coreboot.
+	 */
+	link->l1ss.ctl1 |= LTR_L1_2_THRESHOLD_BITS;
+
+	/* Choose the greater of the two T_pwr_on */
+	val1 = (upreg->l1ss_cap >> 19) & 0x1F;
+	scale1 = (upreg->l1ss_cap >> 16) & 0x03;
+	val2 = (dwreg->l1ss_cap >> 19) & 0x1F;
+	scale2 = (dwreg->l1ss_cap >> 16) & 0x03;
+
+	if (calc_l1ss_pwron(link->pdev, scale1, val1) >
+	    calc_l1ss_pwron(link->downstream, scale2, val2))
+		link->l1ss.ctl2 |= scale1 | (val1 << 3);
+	else
+		link->l1ss.ctl2 |= scale2 | (val2 << 3);
+}
+
 static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
 {
 	struct pci_dev *child, *parent = link->pdev;
@@ -353,8 +491,9 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
 
 	/* Get upstream/downstream components' register state */
 	pcie_get_aspm_reg(parent, &upreg);
-	child = list_entry(linkbus->devices.next, struct pci_dev, bus_list);
+	child = pci_function_0(linkbus);
 	pcie_get_aspm_reg(child, &dwreg);
+	link->downstream = child;
 
 	/*
 	 * If ASPM not supported, don't mess with the clocks and link,
@@ -397,6 +536,28 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
 	link->latency_up.l1 = calc_l1_latency(upreg.latency_encoding_l1);
 	link->latency_dw.l1 = calc_l1_latency(dwreg.latency_encoding_l1);
 
+	/* Setup L1 substate */
+	if (upreg.l1ss_cap & dwreg.l1ss_cap & PCI_L1SS_CAP_ASPM_L1_1)
+		link->aspm_support |= ASPM_STATE_L1_1;
+	if (upreg.l1ss_cap & dwreg.l1ss_cap & PCI_L1SS_CAP_ASPM_L1_2)
+		link->aspm_support |= ASPM_STATE_L1_2;
+	if (upreg.l1ss_cap & dwreg.l1ss_cap & PCI_L1SS_CAP_PCIPM_L1_1)
+		link->aspm_support |= ASPM_STATE_L1_1_PCIPM;
+	if (upreg.l1ss_cap & dwreg.l1ss_cap & PCI_L1SS_CAP_PCIPM_L1_2)
+		link->aspm_support |= ASPM_STATE_L1_2_PCIPM;
+
+	if (upreg.l1ss_ctl1 & dwreg.l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_1)
+		link->aspm_enabled |= ASPM_STATE_L1_1;
+	if (upreg.l1ss_ctl1 & dwreg.l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_2)
+		link->aspm_enabled |= ASPM_STATE_L1_2;
+	if (upreg.l1ss_ctl1 & dwreg.l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_1)
+		link->aspm_enabled |= ASPM_STATE_L1_1_PCIPM;
+	if (upreg.l1ss_ctl1 & dwreg.l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_2)
+		link->aspm_enabled |= ASPM_STATE_L1_2_PCIPM;
+
+	if (link->aspm_support & ASPM_STATE_L1SS)
+		aspm_calc_l1ss_info(link, &upreg, &dwreg);
+
 	/* Save default state */
 	link->aspm_default = link->aspm_enabled;
 
@@ -435,6 +596,92 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
 	}
 }
 
+static void pci_clear_and_set_dword(struct pci_dev *pdev, int pos,
+				    u32 clear, u32 set)
+{
+	u32 val;
+
+	pci_read_config_dword(pdev, pos, &val);
+	val &= ~clear;
+	val |= set;
+	pci_write_config_dword(pdev, pos, val);
+}
+
+/* Configure the ASPM L1 substates */
+static void pcie_config_aspm_l1ss(struct pcie_link_state *link, u32 state)
+{
+	u32 val, enable_req;
+	struct pci_dev *child = link->downstream, *parent = link->pdev;
+	u32 up_cap_ptr = link->l1ss.up_cap_ptr;
+	u32 dw_cap_ptr = link->l1ss.dw_cap_ptr;
+
+	enable_req = (link->aspm_enabled ^ state) & state;
+
+	/*
+	 * Here are the rules specified in the PCIe spec for enabling L1SS:
+	 * - When enabling L1.x, enable bit at parent first, then at child
+	 * - When disabling L1.x, disable bit at child first, then at parent
+	 * - When enabling ASPM L1.x, need to disable L1
+	 *   (at child followed by parent).
+	 * - The ASPM/PCIPM L1.2 must be disabled while programming timing
+	 *   parameters
+	 *
+	 * To keep it simple, disable all L1SS bits first, and later enable
+	 * what is needed.
+	 */
+
+	/* Disable all L1 substates */
+	pci_clear_and_set_dword(child, dw_cap_ptr + PCI_L1SS_CTL1,
+				PCI_L1SS_CTL1_L1SS_MASK, 0);
+	pci_clear_and_set_dword(parent, up_cap_ptr + PCI_L1SS_CTL1,
+				PCI_L1SS_CTL1_L1SS_MASK, 0);
+	/*
+	 * If needed, disable L1, and it gets enabled later
+	 * in pcie_config_aspm_link().
+	 */
+	if (enable_req & (ASPM_STATE_L1_1 | ASPM_STATE_L1_2)) {
+		pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL,
+						   PCI_EXP_LNKCTL_ASPM_L1, 0);
+		pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL,
+						   PCI_EXP_LNKCTL_ASPM_L1, 0);
+	}
+
+	if (enable_req & ASPM_STATE_L1_2_MASK) {
+
+		/* Program T_pwr_on in both ports */
+		pci_write_config_dword(parent, up_cap_ptr + PCI_L1SS_CTL2,
+				       link->l1ss.ctl2);
+		pci_write_config_dword(child, dw_cap_ptr + PCI_L1SS_CTL2,
+				       link->l1ss.ctl2);
+
+		/* Program T_cmn_mode in parent */
+		pci_clear_and_set_dword(parent, up_cap_ptr + PCI_L1SS_CTL1,
+					0xFF00, link->l1ss.ctl1);
+
+		/* Program LTR L1.2 threshold in both ports */
+		pci_clear_and_set_dword(parent,	dw_cap_ptr + PCI_L1SS_CTL1,
+					0xE3FF0000, link->l1ss.ctl1);
+		pci_clear_and_set_dword(child, dw_cap_ptr + PCI_L1SS_CTL1,
+					0xE3FF0000, link->l1ss.ctl1);
+	}
+
+	val = 0;
+	if (state & ASPM_STATE_L1_1)
+		val |= PCI_L1SS_CTL1_ASPM_L1_1;
+	if (state & ASPM_STATE_L1_2)
+		val |= PCI_L1SS_CTL1_ASPM_L1_2;
+	if (state & ASPM_STATE_L1_1_PCIPM)
+		val |= PCI_L1SS_CTL1_PCIPM_L1_1;
+	if (state & ASPM_STATE_L1_2_PCIPM)
+		val |= PCI_L1SS_CTL1_PCIPM_L1_2;
+
+	/* Enable what we need to enable */
+	pci_clear_and_set_dword(parent, up_cap_ptr + PCI_L1SS_CTL1,
+				PCI_L1SS_CAP_L1_PM_SS, val);
+	pci_clear_and_set_dword(child, dw_cap_ptr + PCI_L1SS_CTL1,
+				PCI_L1SS_CAP_L1_PM_SS, val);
+}
+
 static void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val)
 {
 	pcie_capability_clear_and_set_word(pdev, PCI_EXP_LNKCTL,
@@ -444,11 +691,23 @@ static void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val)
 static void pcie_config_aspm_link(struct pcie_link_state *link, u32 state)
 {
 	u32 upstream = 0, dwstream = 0;
-	struct pci_dev *child, *parent = link->pdev;
+	struct pci_dev *child = link->downstream, *parent = link->pdev;
 	struct pci_bus *linkbus = parent->subordinate;
 
-	/* Nothing to do if the link is already in the requested state */
+	/* Enable only the states that were not explicitly disabled */
 	state &= (link->aspm_capable & ~link->aspm_disable);
+
+	/* Can't enable any substates if L1 is not enabled */
+	if (!(state & ASPM_STATE_L1))
+		state &= ~ASPM_STATE_L1SS;
+
+	/* Spec says both ports must be in D0 before enabling PCI PM substates*/
+	if (parent->current_state != PCI_D0 || child->current_state != PCI_D0) {
+		state &= ~ASPM_STATE_L1_SS_PCIPM;
+		state |= (link->aspm_enabled & ASPM_STATE_L1_SS_PCIPM);
+	}
+
+	/* Nothing to do if the link is already in the requested state */
 	if (link->aspm_enabled == state)
 		return;
 	/* Convert ASPM state to upstream/downstream ASPM register state */
@@ -460,6 +719,10 @@ static void pcie_config_aspm_link(struct pcie_link_state *link, u32 state)
 		upstream |= PCI_EXP_LNKCTL_ASPM_L1;
 		dwstream |= PCI_EXP_LNKCTL_ASPM_L1;
 	}
+
+	if (link->aspm_capable & ASPM_STATE_L1SS)
+		pcie_config_aspm_l1ss(link, state);
+
 	/*
 	 * Spec 2.0 suggests all functions should be configured the
 	 * same setting for ASPM. Enabling ASPM L1 should be done in
@@ -612,7 +875,8 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev)
 	 * the BIOS's expectation, we'll do so once pci_enable_device() is
 	 * called.
 	 */
-	if (aspm_policy != POLICY_POWERSAVE) {
+	if (aspm_policy != POLICY_POWERSAVE &&
+	    aspm_policy != POLICY_POWER_SUPERSAVE) {
 		pcie_config_aspm_path(link);
 		pcie_set_clkpm(link, policy_to_clkpm_state(link));
 	}
@@ -712,7 +976,8 @@ void pcie_aspm_powersave_config_link(struct pci_dev *pdev)
 	if (aspm_disabled || !link)
 		return;
 
-	if (aspm_policy != POLICY_POWERSAVE)
+	if (aspm_policy != POLICY_POWERSAVE &&
+	    aspm_policy != POLICY_POWER_SUPERSAVE)
 		return;
 
 	down_read(&pci_bus_sem);
diff --git a/drivers/pci/pcie/pcie-dpc.c b/drivers/pci/pcie/pcie-dpc.c
index 9811b14..d4d70ef 100644
--- a/drivers/pci/pcie/pcie-dpc.c
+++ b/drivers/pci/pcie/pcie-dpc.c
@@ -19,8 +19,28 @@ struct dpc_dev {
 	struct pcie_device	*dev;
 	struct work_struct	work;
 	int			cap_pos;
+	bool			rp;
 };
 
+static int dpc_wait_rp_inactive(struct dpc_dev *dpc)
+{
+	unsigned long timeout = jiffies + HZ;
+	struct pci_dev *pdev = dpc->dev->port;
+	u16 status;
+
+	pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_STATUS, &status);
+	while (status & PCI_EXP_DPC_RP_BUSY &&
+					!time_after(jiffies, timeout)) {
+		msleep(10);
+		pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_STATUS, &status);
+	}
+	if (status & PCI_EXP_DPC_RP_BUSY) {
+		dev_warn(&pdev->dev, "DPC root port still busy\n");
+		return -EBUSY;
+	}
+	return 0;
+}
+
 static void dpc_wait_link_inactive(struct pci_dev *pdev)
 {
 	unsigned long timeout = jiffies + HZ;
@@ -33,7 +53,7 @@ static void dpc_wait_link_inactive(struct pci_dev *pdev)
 		pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
 	}
 	if (lnk_status & PCI_EXP_LNKSTA_DLLLA)
-		dev_warn(&pdev->dev, "Link state not disabled for DPC event");
+		dev_warn(&pdev->dev, "Link state not disabled for DPC event\n");
 }
 
 static void interrupt_event_handler(struct work_struct *work)
@@ -52,6 +72,8 @@ static void interrupt_event_handler(struct work_struct *work)
 	pci_unlock_rescan_remove();
 
 	dpc_wait_link_inactive(pdev);
+	if (dpc->rp && dpc_wait_rp_inactive(dpc))
+		return;
 	pci_write_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_STATUS,
 		PCI_EXP_DPC_STATUS_TRIGGER | PCI_EXP_DPC_STATUS_INTERRUPT);
 }
@@ -73,11 +95,15 @@ static irqreturn_t dpc_irq(int irq, void *context)
 
 	if (status & PCI_EXP_DPC_STATUS_TRIGGER) {
 		u16 reason = (status >> 1) & 0x3;
+		u16 ext_reason = (status >> 5) & 0x3;
 
-		dev_warn(&dpc->dev->device, "DPC %s triggered, remove downstream devices\n",
+		dev_warn(&dpc->dev->device, "DPC %s detected, remove downstream devices\n",
 			 (reason == 0) ? "unmasked uncorrectable error" :
 			 (reason == 1) ? "ERR_NONFATAL" :
-			 (reason == 2) ? "ERR_FATAL" : "extended error");
+			 (reason == 2) ? "ERR_FATAL" :
+			 (ext_reason == 0) ? "RP PIO error" :
+			 (ext_reason == 1) ? "software trigger" :
+					     "reserved error");
 		schedule_work(&dpc->work);
 	}
 	return IRQ_HANDLED;
@@ -111,6 +137,8 @@ static int dpc_probe(struct pcie_device *dev)
 	pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CAP, &cap);
 	pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, &ctl);
 
+	dpc->rp = (cap & PCI_EXP_DPC_CAP_RP_EXT);
+
 	ctl |= PCI_EXP_DPC_CTL_EN_NONFATAL | PCI_EXP_DPC_CTL_INT_EN;
 	pci_write_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, ctl);
 
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index e164b5c..3abc942 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1554,8 +1554,16 @@ static void program_hpp_type0(struct pci_dev *dev, struct hpp_type0 *hpp)
 
 static void program_hpp_type1(struct pci_dev *dev, struct hpp_type1 *hpp)
 {
-	if (hpp)
-		dev_warn(&dev->dev, "PCI-X settings not supported\n");
+	int pos;
+
+	if (!hpp)
+		return;
+
+	pos = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+	if (!pos)
+		return;
+
+	dev_warn(&dev->dev, "PCI-X settings not supported\n");
 }
 
 static bool pcie_root_rcb_set(struct pci_dev *dev)
@@ -1581,6 +1589,9 @@ static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp)
 	if (!hpp)
 		return;
 
+	if (!pci_is_pcie(dev))
+		return;
+
 	if (hpp->revision > 1) {
 		dev_warn(&dev->dev, "PCIe settings rev %d not supported\n",
 			 hpp->revision);
@@ -1650,12 +1661,30 @@ static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp)
 	 */
 }
 
+static void pci_configure_extended_tags(struct pci_dev *dev)
+{
+	u32 dev_cap;
+	int ret;
+
+	if (!pci_is_pcie(dev))
+		return;
+
+	ret = pcie_capability_read_dword(dev, PCI_EXP_DEVCAP, &dev_cap);
+	if (ret)
+		return;
+
+	if (dev_cap & PCI_EXP_DEVCAP_EXT_TAG)
+		pcie_capability_set_word(dev, PCI_EXP_DEVCTL,
+					 PCI_EXP_DEVCTL_EXT_TAG);
+}
+
 static void pci_configure_device(struct pci_dev *dev)
 {
 	struct hotplug_params hpp;
 	int ret;
 
 	pci_configure_mps(dev);
+	pci_configure_extended_tags(dev);
 
 	memset(&hpp, 0, sizeof(hpp));
 	ret = pci_get_hp_params(dev, &hpp);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index e2d1a12..2c0158b 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -678,9 +678,6 @@ struct pci_error_handlers {
 	/* MMIO has been re-enabled, but not DMA */
 	pci_ers_result_t (*mmio_enabled)(struct pci_dev *dev);
 
-	/* PCI Express link has been reset */
-	pci_ers_result_t (*link_reset)(struct pci_dev *dev);
-
 	/* PCI slot has been reset */
 	pci_ers_result_t (*slot_reset)(struct pci_dev *dev);
 
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index 174d114..634c9c4 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -682,6 +682,7 @@
 #define PCI_EXT_CAP_ID_PMUX	0x1A	/* Protocol Multiplexing */
 #define PCI_EXT_CAP_ID_PASID	0x1B	/* Process Address Space ID */
 #define PCI_EXT_CAP_ID_DPC	0x1D	/* Downstream Port Containment */
+#define PCI_EXT_CAP_ID_L1SS	0x1E	/* L1 PM Substates */
 #define PCI_EXT_CAP_ID_PTM	0x1F	/* Precision Time Measurement */
 #define PCI_EXT_CAP_ID_MAX	PCI_EXT_CAP_ID_PTM
 
@@ -973,6 +974,7 @@
 #define PCI_EXP_DPC_STATUS		8	/* DPC Status */
 #define  PCI_EXP_DPC_STATUS_TRIGGER	0x01	/* Trigger Status */
 #define  PCI_EXP_DPC_STATUS_INTERRUPT	0x08	/* Interrupt Status */
+#define  PCI_EXP_DPC_RP_BUSY		0x10	/* Root Port Busy */
 
 #define PCI_EXP_DPC_SOURCE_ID		10	/* DPC Source Identifier */
 
@@ -985,4 +987,19 @@
 #define  PCI_PTM_CTRL_ENABLE		0x00000001  /* PTM enable */
 #define  PCI_PTM_CTRL_ROOT		0x00000002  /* Root select */
 
+/* L1 PM Substates */
+#define PCI_L1SS_CAP		    4	/* capability register */
+#define  PCI_L1SS_CAP_PCIPM_L1_2	 1	/* PCI PM L1.2 Support */
+#define  PCI_L1SS_CAP_PCIPM_L1_1	 2	/* PCI PM L1.1 Support */
+#define  PCI_L1SS_CAP_ASPM_L1_2		 4	/* ASPM L1.2 Support */
+#define  PCI_L1SS_CAP_ASPM_L1_1		 8	/* ASPM L1.1 Support */
+#define  PCI_L1SS_CAP_L1_PM_SS		16	/* L1 PM Substates Support */
+#define PCI_L1SS_CTL1		    8	/* Control Register 1 */
+#define  PCI_L1SS_CTL1_PCIPM_L1_2	1	/* PCI PM L1.2 Enable */
+#define  PCI_L1SS_CTL1_PCIPM_L1_1	2	/* PCI PM L1.1 Support */
+#define  PCI_L1SS_CTL1_ASPM_L1_2	4	/* ASPM L1.2 Support */
+#define  PCI_L1SS_CTL1_ASPM_L1_1	8	/* ASPM L1.1 Support */
+#define  PCI_L1SS_CTL1_L1SS_MASK	0x0000000F
+#define PCI_L1SS_CTL2		    0xC	/* Control Register 2 */
+
 #endif /* LINUX_PCI_REGS_H */