[SCSI] lpfc 8.3.24: Add SR-IOV control
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 44816be..6ecd6da 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1384,6 +1384,102 @@
}
/**
+ * lpfc_sriov_hw_max_virtfn_show - Return maximum number of virtual functions
+ * @dev: class converted to a Scsi_host structure.
+ * @attr: device attribute, not used.
+ * @buf: on return contains the formatted support level.
+ *
+ * Description:
+ * Returns the maximum number of virtual functions a physical function can
+ * support, 0 will be returned if called on virtual function.
+ *
+ * Returns: size of formatted string.
+ **/
+static ssize_t
+lpfc_sriov_hw_max_virtfn_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ struct pci_dev *pdev = phba->pcidev;
+ union lpfc_sli4_cfg_shdr *shdr;
+ uint32_t shdr_status, shdr_add_status;
+ LPFC_MBOXQ_t *mboxq;
+ struct lpfc_mbx_get_prof_cfg *get_prof_cfg;
+ struct lpfc_rsrc_desc_pcie *desc;
+ uint32_t max_nr_virtfn;
+ uint32_t desc_count;
+ int length, rc, i;
+
+ if ((phba->sli_rev < LPFC_SLI_REV4) ||
+ (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) !=
+ LPFC_SLI_INTF_IF_TYPE_2))
+ return -EPERM;
+
+ if (!pdev->is_physfn)
+ return snprintf(buf, PAGE_SIZE, "%d\n", 0);
+
+ mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq)
+ return -ENOMEM;
+
+ /* get the maximum number of virtfn support by physfn */
+ length = (sizeof(struct lpfc_mbx_get_prof_cfg) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_GET_PROFILE_CONFIG,
+ length, LPFC_SLI4_MBX_EMBED);
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
+ bf_set(lpfc_mbox_hdr_pf_num, &shdr->request,
+ phba->sli4_hba.iov.pf_number + 1);
+
+ get_prof_cfg = &mboxq->u.mqe.un.get_prof_cfg;
+ bf_set(lpfc_mbx_get_prof_cfg_prof_tp, &get_prof_cfg->u.request,
+ LPFC_CFG_TYPE_CURRENT_ACTIVE);
+
+ rc = lpfc_sli_issue_mbox_wait(phba, mboxq,
+ lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG));
+
+ if (rc != MBX_TIMEOUT) {
+ /* check return status */
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+ &shdr->response);
+ if (shdr_status || shdr_add_status || rc)
+ goto error_out;
+
+ } else
+ goto error_out;
+
+ desc_count = get_prof_cfg->u.response.prof_cfg.rsrc_desc_count;
+
+ for (i = 0; i < LPFC_RSRC_DESC_MAX_NUM; i++) {
+ desc = (struct lpfc_rsrc_desc_pcie *)
+ &get_prof_cfg->u.response.prof_cfg.desc[i];
+ if (LPFC_RSRC_DESC_TYPE_PCIE ==
+ bf_get(lpfc_rsrc_desc_pcie_type, desc)) {
+ max_nr_virtfn = bf_get(lpfc_rsrc_desc_pcie_nr_virtfn,
+ desc);
+ break;
+ }
+ }
+
+ if (i < LPFC_RSRC_DESC_MAX_NUM) {
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ return snprintf(buf, PAGE_SIZE, "%d\n", max_nr_virtfn);
+ }
+
+error_out:
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ return -EIO;
+}
+
+/**
* lpfc_param_show - Return a cfg attribute value in decimal
*
* Description:
@@ -1824,6 +1920,8 @@
static DEVICE_ATTR(lpfc_fips_level, S_IRUGO, lpfc_fips_level_show, NULL);
static DEVICE_ATTR(lpfc_fips_rev, S_IRUGO, lpfc_fips_rev_show, NULL);
static DEVICE_ATTR(lpfc_dss, S_IRUGO, lpfc_dss_show, NULL);
+static DEVICE_ATTR(lpfc_sriov_hw_max_virtfn, S_IRUGO,
+ lpfc_sriov_hw_max_virtfn_show, NULL);
static char *lpfc_soft_wwn_key = "C99G71SL8032A";
@@ -3076,7 +3174,7 @@
*
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
- * @buf: containing the string "selective".
+ * @buf: containing enable or disable aer flag.
* @count: unused variable.
*
* Description:
@@ -3160,7 +3258,7 @@
/**
* lpfc_aer_support_init - Set the initial adapters aer support flag
* @phba: lpfc_hba pointer.
- * @val: link speed value.
+ * @val: enable aer or disable aer flag.
*
* Description:
* If val is in a valid range [0,1], then set the adapter's initial
@@ -3199,7 +3297,7 @@
* lpfc_aer_cleanup_state - Clean up aer state to the aer enabled device
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
- * @buf: containing the string "selective".
+ * @buf: containing flag 1 for aer cleanup state.
* @count: unused variable.
*
* Description:
@@ -3242,6 +3340,136 @@
static DEVICE_ATTR(lpfc_aer_state_cleanup, S_IWUSR, NULL,
lpfc_aer_cleanup_state);
+/**
+ * lpfc_sriov_nr_virtfn_store - Enable the adapter for sr-iov virtual functions
+ *
+ * @dev: class device that is converted into a Scsi_host.
+ * @attr: device attribute, not used.
+ * @buf: containing the string the number of vfs to be enabled.
+ * @count: unused variable.
+ *
+ * Description:
+ * When this api is called either through user sysfs, the driver shall
+ * try to enable or disable SR-IOV virtual functions according to the
+ * following:
+ *
+ * If zero virtual function has been enabled to the physical function,
+ * the driver shall invoke the pci enable virtual function api trying
+ * to enable the virtual functions. If the nr_vfn provided is greater
+ * than the maximum supported, the maximum virtual function number will
+ * be used for invoking the api; otherwise, the nr_vfn provided shall
+ * be used for invoking the api. If the api call returned success, the
+ * actual number of virtual functions enabled will be set to the driver
+ * cfg_sriov_nr_virtfn; otherwise, -EINVAL shall be returned and driver
+ * cfg_sriov_nr_virtfn remains zero.
+ *
+ * If none-zero virtual functions have already been enabled to the
+ * physical function, as reflected by the driver's cfg_sriov_nr_virtfn,
+ * -EINVAL will be returned and the driver does nothing;
+ *
+ * If the nr_vfn provided is zero and none-zero virtual functions have
+ * been enabled, as indicated by the driver's cfg_sriov_nr_virtfn, the
+ * disabling virtual function api shall be invoded to disable all the
+ * virtual functions and driver's cfg_sriov_nr_virtfn shall be set to
+ * zero. Otherwise, if zero virtual function has been enabled, do
+ * nothing.
+ *
+ * Returns:
+ * length of the buf on success if val is in range the intended mode
+ * is supported.
+ * -EINVAL if val out of range or intended mode is not supported.
+ **/
+static ssize_t
+lpfc_sriov_nr_virtfn_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ struct pci_dev *pdev = phba->pcidev;
+ int val = 0, rc = -EINVAL;
+
+ /* Sanity check on user data */
+ if (!isdigit(buf[0]))
+ return -EINVAL;
+ if (sscanf(buf, "%i", &val) != 1)
+ return -EINVAL;
+ if (val < 0)
+ return -EINVAL;
+
+ /* Request disabling virtual functions */
+ if (val == 0) {
+ if (phba->cfg_sriov_nr_virtfn > 0) {
+ pci_disable_sriov(pdev);
+ phba->cfg_sriov_nr_virtfn = 0;
+ }
+ return strlen(buf);
+ }
+
+ /* Request enabling virtual functions */
+ if (phba->cfg_sriov_nr_virtfn > 0) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3018 There are %d virtual functions "
+ "enabled on physical function.\n",
+ phba->cfg_sriov_nr_virtfn);
+ return -EEXIST;
+ }
+
+ if (val <= LPFC_MAX_VFN_PER_PFN)
+ phba->cfg_sriov_nr_virtfn = val;
+ else {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3019 Enabling %d virtual functions is not "
+ "allowed.\n", val);
+ return -EINVAL;
+ }
+
+ rc = lpfc_sli_probe_sriov_nr_virtfn(phba, phba->cfg_sriov_nr_virtfn);
+ if (rc) {
+ phba->cfg_sriov_nr_virtfn = 0;
+ rc = -EPERM;
+ } else
+ rc = strlen(buf);
+
+ return rc;
+}
+
+static int lpfc_sriov_nr_virtfn = LPFC_DEF_VFN_PER_PFN;
+module_param(lpfc_sriov_nr_virtfn, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(lpfc_sriov_nr_virtfn, "Enable PCIe device SR-IOV virtual fn");
+lpfc_param_show(sriov_nr_virtfn)
+
+/**
+ * lpfc_sriov_nr_virtfn_init - Set the initial sr-iov virtual function enable
+ * @phba: lpfc_hba pointer.
+ * @val: link speed value.
+ *
+ * Description:
+ * If val is in a valid range [0,255], then set the adapter's initial
+ * cfg_sriov_nr_virtfn field. If it's greater than the maximum, the maximum
+ * number shall be used instead. It will be up to the driver's probe_one
+ * routine to determine whether the device's SR-IOV is supported or not.
+ *
+ * Returns:
+ * zero if val saved.
+ * -EINVAL val out of range
+ **/
+static int
+lpfc_sriov_nr_virtfn_init(struct lpfc_hba *phba, int val)
+{
+ if (val >= 0 && val <= LPFC_MAX_VFN_PER_PFN) {
+ phba->cfg_sriov_nr_virtfn = val;
+ return 0;
+ }
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3017 Enabling %d virtual functions is not "
+ "allowed.\n", val);
+ return -EINVAL;
+}
+static DEVICE_ATTR(lpfc_sriov_nr_virtfn, S_IRUGO | S_IWUSR,
+ lpfc_sriov_nr_virtfn_show, lpfc_sriov_nr_virtfn_store);
+
/*
# lpfc_fcp_class: Determines FC class to use for the FCP protocol.
# Value range is [2,3]. Default value is 3.
@@ -3559,6 +3787,7 @@
&dev_attr_lpfc_prot_sg_seg_cnt,
&dev_attr_lpfc_aer_support,
&dev_attr_lpfc_aer_state_cleanup,
+ &dev_attr_lpfc_sriov_nr_virtfn,
&dev_attr_lpfc_suppress_link_up,
&dev_attr_lpfc_iocb_cnt,
&dev_attr_iocb_hw,
@@ -3567,6 +3796,7 @@
&dev_attr_lpfc_fips_level,
&dev_attr_lpfc_fips_rev,
&dev_attr_lpfc_dss,
+ &dev_attr_lpfc_sriov_hw_max_virtfn,
NULL,
};
@@ -4767,6 +4997,7 @@
lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth);
lpfc_hba_log_verbose_init(phba, lpfc_log_verbose);
lpfc_aer_support_init(phba, lpfc_aer_support);
+ lpfc_sriov_nr_virtfn_init(phba, lpfc_sriov_nr_virtfn);
lpfc_suppress_link_up_init(phba, lpfc_suppress_link_up);
lpfc_iocb_cnt_init(phba, lpfc_iocb_cnt);
phba->cfg_enable_dss = 1;
