blob: 2412894a255de7d6151a87def9c247f4dbeb7052 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/ata/pata-common.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Common Properties for Parallel AT attachment (PATA) controllers
maintainers:
- Linus Walleij <linus.walleij@linaro.org>
description: |
This document defines device tree properties common to most Parallel
ATA (PATA, also known as IDE) AT attachment storage devices.
It doesn't constitue a device tree binding specification by itself but is
meant to be referenced by device tree bindings.
The PATA (IDE) controller-specific device tree bindings are responsible for
defining whether each property is required or optional.
properties:
$nodename:
pattern: "^ide(@.*)?$"
description:
Specifies the host controller node. PATA host controller nodes are named
"ide".
"#address-cells":
const: 1
"#size-cells":
const: 0
patternProperties:
"^ide-port@[0-1]$":
description: |
DT nodes for ports connected on the PATA host. The master drive will have
ID number 0 and the slave drive will have ID number 1. The PATA port
nodes will be named "ide-port".
type: object
properties:
reg:
minimum: 0
maximum: 1
description:
The ID number of the drive port, 0 for the master port and 1 for the
slave port.
additionalProperties: true
...