blob: e42cb610f545c112f068766a7a96d8a32c6f9dce [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/bridge/snps,dw-mipi-dsi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Synopsys DesignWare MIPI DSI host controller
maintainers:
- Philippe CORNU <philippe.cornu@st.com>
description: |
This document defines device tree properties for the Synopsys DesignWare MIPI
DSI host controller. It doesn't constitue a device tree binding specification
by itself but is meant to be referenced by platform-specific device tree
bindings.
When referenced from platform device tree bindings the properties defined in
this document are defined as follows. The platform device tree bindings are
responsible for defining whether each property is required or optional.
allOf:
- $ref: ../dsi-controller.yaml#
properties:
reg:
maxItems: 1
clocks:
items:
- description: Module clock
- description: DSI bus clock for either AHB and APB
- description: Pixel clock for the DPI/RGB input
minItems: 2
clock-names:
items:
- const: ref
- const: pclk
- const: px_clk
minItems: 2
resets:
maxItems: 1
reset-names:
const: apb
ports:
type: object
properties:
port@0:
type: object
description: Input node to receive pixel data.
port@1:
type: object
description: DSI output node to panel.
required:
- port@0
- port@1
required:
- clock-names
- clocks
- ports
- reg
additionalProperties: true