blob: 7d65c24fcda87cd493e1227f67da5971ca6bc65f [file] [log] [blame]
* Renesas R-Car Display Unit (DU)
Required Properties:
- compatible: must be one of the following.
- "renesas,du-r8a7742" for R8A7742 (RZ/G1H) compatible DU
- "renesas,du-r8a7743" for R8A7743 (RZ/G1M) compatible DU
- "renesas,du-r8a7744" for R8A7744 (RZ/G1N) compatible DU
- "renesas,du-r8a7745" for R8A7745 (RZ/G1E) compatible DU
- "renesas,du-r8a77470" for R8A77470 (RZ/G1C) compatible DU
- "renesas,du-r8a774a1" for R8A774A1 (RZ/G2M) compatible DU
- "renesas,du-r8a774b1" for R8A774B1 (RZ/G2N) compatible DU
- "renesas,du-r8a774c0" for R8A774C0 (RZ/G2E) compatible DU
- "renesas,du-r8a774e1" for R8A774E1 (RZ/G2H) compatible DU
- "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
- "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
- "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU
- "renesas,du-r8a7792" for R8A7792 (R-Car V2H) compatible DU
- "renesas,du-r8a7793" for R8A7793 (R-Car M2-N) compatible DU
- "renesas,du-r8a7794" for R8A7794 (R-Car E2) compatible DU
- "renesas,du-r8a7795" for R8A7795 (R-Car H3) compatible DU
- "renesas,du-r8a7796" for R8A7796 (R-Car M3-W) compatible DU
- "renesas,du-r8a77961" for R8A77961 (R-Car M3-W+) compatible DU
- "renesas,du-r8a77965" for R8A77965 (R-Car M3-N) compatible DU
- "renesas,du-r8a77970" for R8A77970 (R-Car V3M) compatible DU
- "renesas,du-r8a77980" for R8A77980 (R-Car V3H) compatible DU
- "renesas,du-r8a77990" for R8A77990 (R-Car E3) compatible DU
- "renesas,du-r8a77995" for R8A77995 (R-Car D3) compatible DU
- reg: the memory-mapped I/O registers base address and length
- interrupts: Interrupt specifiers for the DU interrupts.
- clocks: A list of phandles + clock-specifier pairs, one for each entry in
the clock-names property.
- clock-names: Name of the clocks. This property is model-dependent.
- R8A7779 uses a single functional clock. The clock doesn't need to be
named.
- All other DU instances use one functional clock per channel The
functional clocks must be named "du.x" with "x" being the channel
numerical index.
- In addition to the functional clocks, all DU versions also support
externally supplied pixel clocks. Those clocks are optional. When
supplied they must be named "dclkin.x" with "x" being the input clock
numerical index.
- renesas,cmms: A list of phandles to the CMM instances present in the SoC,
one for each available DU channel. The property shall not be specified for
SoCs that do not provide any CMM (such as V3M and V3H).
- renesas,vsps: A list of phandle and channel index tuples to the VSPs that
handle the memory interfaces for the DU channels. The phandle identifies the
VSP instance that serves the DU channel, and the channel index identifies
the LIF instance in that VSP.
Optional properties:
- resets: A list of phandle + reset-specifier pairs, one for each entry in
the reset-names property.
- reset-names: Names of the resets. This property is model-dependent.
- All but R8A7779 use one reset for a group of one or more successive
channels. The resets must be named "du.x" with "x" being the numerical
index of the lowest channel in the group.
Required nodes:
The connections to the DU output video ports are modeled using the OF graph
bindings specified in Documentation/devicetree/bindings/graph.txt.
The following table lists for each supported model the port number
corresponding to each DU output.
Port0 Port1 Port2 Port3
-----------------------------------------------------------------------------
R8A7742 (RZ/G1H) DPAD 0 LVDS 0 LVDS 1 -
R8A7743 (RZ/G1M) DPAD 0 LVDS 0 - -
R8A7744 (RZ/G1N) DPAD 0 LVDS 0 - -
R8A7745 (RZ/G1E) DPAD 0 DPAD 1 - -
R8A77470 (RZ/G1C) DPAD 0 DPAD 1 LVDS 0 -
R8A774A1 (RZ/G2M) DPAD 0 HDMI 0 LVDS 0 -
R8A774B1 (RZ/G2N) DPAD 0 HDMI 0 LVDS 0 -
R8A774C0 (RZ/G2E) DPAD 0 LVDS 0 LVDS 1 -
R8A774E1 (RZ/G2H) DPAD 0 HDMI 0 LVDS 0 -
R8A7779 (R-Car H1) DPAD 0 DPAD 1 - -
R8A7790 (R-Car H2) DPAD 0 LVDS 0 LVDS 1 -
R8A7791 (R-Car M2-W) DPAD 0 LVDS 0 - -
R8A7792 (R-Car V2H) DPAD 0 DPAD 1 - -
R8A7793 (R-Car M2-N) DPAD 0 LVDS 0 - -
R8A7794 (R-Car E2) DPAD 0 DPAD 1 - -
R8A7795 (R-Car H3) DPAD 0 HDMI 0 HDMI 1 LVDS 0
R8A7796 (R-Car M3-W) DPAD 0 HDMI 0 LVDS 0 -
R8A77961 (R-Car M3-W+) DPAD 0 HDMI 0 LVDS 0 -
R8A77965 (R-Car M3-N) DPAD 0 HDMI 0 LVDS 0 -
R8A77970 (R-Car V3M) DPAD 0 LVDS 0 - -
R8A77980 (R-Car V3H) DPAD 0 LVDS 0 - -
R8A77990 (R-Car E3) DPAD 0 LVDS 0 LVDS 1 -
R8A77995 (R-Car D3) DPAD 0 LVDS 0 LVDS 1 -
Example: R8A7795 (R-Car H3) ES2.0 DU
du: display@feb00000 {
compatible = "renesas,du-r8a7795";
reg = <0 0xfeb00000 0 0x80000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
<&cpg CPG_MOD 721>;
clock-names = "du.0", "du.1", "du.2", "du.3";
resets = <&cpg 724>, <&cpg 722>;
reset-names = "du.0", "du.2";
renesas,cmms = <&cmm0>, <&cmm1>, <&cmm2>, <&cmm3>;
renesas,vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
du_out_rgb: endpoint {
};
};
port@1 {
reg = <1>;
du_out_hdmi0: endpoint {
remote-endpoint = <&dw_hdmi0_in>;
};
};
port@2 {
reg = <2>;
du_out_hdmi1: endpoint {
remote-endpoint = <&dw_hdmi1_in>;
};
};
port@3 {
reg = <3>;
du_out_lvds0: endpoint {
};
};
};
};