Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input layer updates from Dmitry Torokhov:
"First set of updates for the input subsystem. You will get a new
touchscreen driver (Melfas mms114), a new keypad driver for LPC32xx
SoC, large update to Atmel mXT touchscreen driver, a lot of drivers
acquired device tree support and a slew of other fixes."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
Input: add MELFAS mms114 touchscreen driver
Input: add support for key scan interface of the LPC32xx SoC
Input: omap4-keypad - add device tree support
Input: hanwang - add support for Art Master II tablet
Input: spear_keyboard - reconfigure operating frequency on suspend
Input: spear_keyboard - fix clock handling during suspend/resume
Input: ff-memless - fix a couple min_t() casts
Input: synaptics - print firmware ID and board number at init
Input: spear_keyboard - generalize keyboard frequency configuration
Input: spear_keyboard - rename bit definitions to reflect register
Input: spear_keyboard - use correct io accessors
Input: spear-keyboard - fix disable device_init_wakeup in remove
Input: wacom_i2c - fix compiler warning
Input: imx_keypad - check error returned by clk_prepare_enable()
Input: imx_keypad - adapt the new kpp clock name
Input: imx_keypad - use clk_prepare_enable/clk_disable_unprepare()
Input: ad7879 - add option to correct xy axis
Input: synaptics_usb - Remove TrackPoint name trailing whitespace
Revert "Input: atmel_mxt_ts - warn if sysfs could not be created"
Input: MT - Include win8 support
...
diff --git a/Documentation/devicetree/bindings/input/lpc32xx-key.txt b/Documentation/devicetree/bindings/input/lpc32xx-key.txt
new file mode 100644
index 0000000..31afd50
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/lpc32xx-key.txt
@@ -0,0 +1,28 @@
+NXP LPC32xx Key Scan Interface
+
+Required Properties:
+- compatible: Should be "nxp,lpc3220-key"
+- reg: Physical base address of the controller and length of memory mapped
+ region.
+- interrupts: The interrupt number to the cpu.
+- keypad,num-rows: Number of rows and columns, e.g. 1: 1x1, 6: 6x6
+- keypad,num-columns: Must be equal to keypad,num-rows since LPC32xx only
+ supports square matrices
+- nxp,debounce-delay-ms: Debounce delay in ms
+- nxp,scan-delay-ms: Repeated scan period in ms
+- linux,keymap: the key-code to be reported when the key is pressed
+ and released, see also
+ Documentation/devicetree/bindings/input/matrix-keymap.txt
+
+Example:
+
+ key@40050000 {
+ compatible = "nxp,lpc3220-key";
+ reg = <0x40050000 0x1000>;
+ interrupts = <54 0>;
+ keypad,num-rows = <1>;
+ keypad,num-columns = <1>;
+ nxp,debounce-delay-ms = <3>;
+ nxp,scan-delay-ms = <34>;
+ linux,keymap = <0x00000002>;
+ };
diff --git a/Documentation/devicetree/bindings/input/omap-keypad.txt b/Documentation/devicetree/bindings/input/omap-keypad.txt
new file mode 100644
index 0000000..f2fa5e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/omap-keypad.txt
@@ -0,0 +1,31 @@
+* TI's Keypad Controller device tree bindings
+
+TI's Keypad controller is used to interface a SoC with a matrix-type
+keypad device. The keypad controller supports multiple row and column lines.
+A key can be placed at each intersection of a unique row and a unique column.
+The keypad controller can sense a key-press and key-release and report the
+event using a interrupt to the cpu.
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+ - "ti,omap4-keypad": For controllers compatible with omap4 keypad
+ controller.
+
+Required Board Specific Properties, in addition to those specified by
+the shared matrix-keyboard bindings:
+- keypad,num-rows: Number of row lines connected to the keypad
+ controller.
+
+- keypad,num-columns: Number of column lines connected to the
+ keypad controller.
+
+Optional Properties specific to linux:
+- linux,keypad-no-autorepeat: do no enable autorepeat feature.
+
+Example:
+ keypad@4ae1c000{
+ compatible = "ti,omap4-keypad";
+ keypad,num-rows = <2>;
+ keypad,num-columns = <8>;
+ linux,keypad-no-autorepeat;
+ };
diff --git a/Documentation/devicetree/bindings/input/twl6040-vibra.txt b/Documentation/devicetree/bindings/input/twl6040-vibra.txt
deleted file mode 100644
index 5b1918b..0000000
--- a/Documentation/devicetree/bindings/input/twl6040-vibra.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Vibra driver for the twl6040 family
-
-The vibra driver is a child of the twl6040 MFD dirver.
-Documentation/devicetree/bindings/mfd/twl6040.txt
-
-Required properties:
-- compatible : Must be "ti,twl6040-vibra";
-- interrupts: 4, Vibra overcurrent interrupt
-- vddvibl-supply: Regulator supplying the left vibra motor
-- vddvibr-supply: Regulator supplying the right vibra motor
-- vibldrv_res: Board specific left driver resistance
-- vibrdrv_res: Board specific right driver resistance
-- viblmotor_res: Board specific left motor resistance
-- vibrmotor_res: Board specific right motor resistance
-
-Optional properties:
-- vddvibl_uV: If the vddvibl default voltage need to be changed
-- vddvibr_uV: If the vddvibr default voltage need to be changed
-
-Example:
-/*
- * 8-channel high quality low-power audio codec
- * http://www.ti.com/lit/ds/symlink/twl6040.pdf
- */
-twl6040: twl6040@4b {
- ...
- twl6040_vibra: twl6040@1 {
- compatible = "ti,twl6040-vibra";
- interrupts = <4>;
- vddvibl-supply = <&vbat>;
- vddvibr-supply = <&vbat>;
- vibldrv_res = <8>;
- vibrdrv_res = <3>;
- viblmotor_res = <10>;
- vibrmotor_res = <10>;
- };
-};
diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt
index 543101c..2c17961 100644
--- a/Documentation/input/multi-touch-protocol.txt
+++ b/Documentation/input/multi-touch-protocol.txt
@@ -162,26 +162,48 @@
minimum set consists of ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which
allows for multiple contacts to be tracked. If the device supports it, the
ABS_MT_TOUCH_MAJOR and ABS_MT_WIDTH_MAJOR may be used to provide the size
-of the contact area and approaching contact, respectively.
+of the contact area and approaching tool, respectively.
The TOUCH and WIDTH parameters have a geometrical interpretation; imagine
looking through a window at someone gently holding a finger against the
glass. You will see two regions, one inner region consisting of the part
of the finger actually touching the glass, and one outer region formed by
-the perimeter of the finger. The diameter of the inner region is the
-ABS_MT_TOUCH_MAJOR, the diameter of the outer region is
-ABS_MT_WIDTH_MAJOR. Now imagine the person pressing the finger harder
-against the glass. The inner region will increase, and in general, the
-ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller than
-unity, is related to the contact pressure. For pressure-based devices,
+the perimeter of the finger. The center of the touching region (a) is
+ABS_MT_POSITION_X/Y and the center of the approaching finger (b) is
+ABS_MT_TOOL_X/Y. The touch diameter is ABS_MT_TOUCH_MAJOR and the finger
+diameter is ABS_MT_WIDTH_MAJOR. Now imagine the person pressing the finger
+harder against the glass. The touch region will increase, and in general,
+the ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller
+than unity, is related to the contact pressure. For pressure-based devices,
ABS_MT_PRESSURE may be used to provide the pressure on the contact area
instead. Devices capable of contact hovering can use ABS_MT_DISTANCE to
indicate the distance between the contact and the surface.
-In addition to the MAJOR parameters, the oval shape of the contact can be
-described by adding the MINOR parameters, such that MAJOR and MINOR are the
-major and minor axis of an ellipse. Finally, the orientation of the oval
-shape can be describe with the ORIENTATION parameter.
+
+ Linux MT Win8
+ __________ _______________________
+ / \ | |
+ / \ | |
+ / ____ \ | |
+ / / \ \ | |
+ \ \ a \ \ | a |
+ \ \____/ \ | |
+ \ \ | |
+ \ b \ | b |
+ \ \ | |
+ \ \ | |
+ \ \ | |
+ \ / | |
+ \ / | |
+ \ / | |
+ \__________/ |_______________________|
+
+
+In addition to the MAJOR parameters, the oval shape of the touch and finger
+regions can be described by adding the MINOR parameters, such that MAJOR
+and MINOR are the major and minor axis of an ellipse. The orientation of
+the touch ellipse can be described with the ORIENTATION parameter, and the
+direction of the finger ellipse is given by the vector (a - b).
For type A devices, further specification of the touch shape is possible
via ABS_MT_BLOB_ID.
@@ -224,7 +246,7 @@
The above four values can be used to derive additional information about
the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
the notion of pressure. The fingers of the hand and the palm all have
-different characteristic widths [1].
+different characteristic widths.
ABS_MT_PRESSURE
@@ -240,17 +262,24 @@
ABS_MT_ORIENTATION
-The orientation of the ellipse. The value should describe a signed quarter
-of a revolution clockwise around the touch center. The signed value range
-is arbitrary, but zero should be returned for a finger aligned along the Y
-axis of the surface, a negative value when finger is turned to the left, and
-a positive value when finger turned to the right. When completely aligned with
-the X axis, the range max should be returned. Orientation can be omitted
-if the touching object is circular, or if the information is not available
-in the kernel driver. Partial orientation support is possible if the device
-can distinguish between the two axis, but not (uniquely) any values in
-between. In such cases, the range of ABS_MT_ORIENTATION should be [0, 1]
-[4].
+The orientation of the touching ellipse. The value should describe a signed
+quarter of a revolution clockwise around the touch center. The signed value
+range is arbitrary, but zero should be returned for an ellipse aligned with
+the Y axis of the surface, a negative value when the ellipse is turned to
+the left, and a positive value when the ellipse is turned to the
+right. When completely aligned with the X axis, the range max should be
+returned.
+
+Touch ellipsis are symmetrical by default. For devices capable of true 360
+degree orientation, the reported orientation must exceed the range max to
+indicate more than a quarter of a revolution. For an upside-down finger,
+range max * 2 should be returned.
+
+Orientation can be omitted if the touch area is circular, or if the
+information is not available in the kernel driver. Partial orientation
+support is possible if the device can distinguish between the two axis, but
+not (uniquely) any values in between. In such cases, the range of
+ABS_MT_ORIENTATION should be [0, 1] [4].
ABS_MT_POSITION_X
@@ -260,6 +289,23 @@
The surface Y coordinate of the center of the touching ellipse.
+ABS_MT_TOOL_X
+
+The surface X coordinate of the center of the approaching tool. Omit if
+the device cannot distinguish between the intended touch point and the
+tool itself.
+
+ABS_MT_TOOL_Y
+
+The surface Y coordinate of the center of the approaching tool. Omit if the
+device cannot distinguish between the intended touch point and the tool
+itself.
+
+The four position values can be used to separate the position of the touch
+from the position of the tool. If both positions are present, the major
+tool axis points towards the touch point [1]. Otherwise, the tool axes are
+aligned with the touch axes.
+
ABS_MT_TOOL_TYPE
The type of approaching tool. A lot of kernel drivers cannot distinguish
@@ -305,6 +351,28 @@
the device can distinguish between a finger along the Y axis (0) and a
finger along the X axis (1).
+For win8 devices with both T and C coordinates, the position mapping is
+
+ ABS_MT_POSITION_X := T_X
+ ABS_MT_POSITION_Y := T_Y
+ ABS_MT_TOOL_X := C_X
+ ABS_MT_TOOL_X := C_Y
+
+Unfortunately, there is not enough information to specify both the touching
+ellipse and the tool ellipse, so one has to resort to approximations. One
+simple scheme, which is compatible with earlier usage, is:
+
+ ABS_MT_TOUCH_MAJOR := min(X, Y)
+ ABS_MT_TOUCH_MINOR := <not used>
+ ABS_MT_ORIENTATION := <not used>
+ ABS_MT_WIDTH_MAJOR := min(X, Y) + distance(T, C)
+ ABS_MT_WIDTH_MINOR := min(X, Y)
+
+Rationale: We have no information about the orientation of the touching
+ellipse, so approximate it with an inscribed circle instead. The tool
+ellipse should align with the the vector (T - C), so the diameter must
+increase with distance(T, C). Finally, assume that the touch diameter is
+equal to the tool thickness, and we arrive at the formulas above.
Finger Tracking
---------------
@@ -338,9 +406,7 @@
For example usage of the type A protocol, see the bcm5974 driver. For
example usage of the type B protocol, see the hid-egalax driver.
-[1] With the extension ABS_MT_APPROACH_X and ABS_MT_APPROACH_Y, the
-difference between the contact position and the approaching tool position
-could be used to derive tilt.
+[1] Also, the difference (TOOL_X - POSITION_X) can be used to model tilt.
[2] The list can of course be extended.
[3] The mtdev project: http://bitmath.org/code/mtdev/.
[4] See the section on event computation.
diff --git a/arch/arm/plat-spear/include/plat/keyboard.h b/arch/arm/plat-spear/include/plat/keyboard.h
index 0562f13..9248e3a 100644
--- a/arch/arm/plat-spear/include/plat/keyboard.h
+++ b/arch/arm/plat-spear/include/plat/keyboard.h
@@ -149,6 +149,7 @@
* keymap: pointer to keymap data (table and size)
* rep: enables key autorepeat
* mode: choose keyboard support(9x9, 6x6, 2x2)
+ * suspended_rate: rate at which keyboard would operate in suspended mode
*
* This structure is supposed to be used by platform code to supply
* keymaps to drivers that implement keyboards.
@@ -157,6 +158,7 @@
const struct matrix_keymap_data *keymap;
bool rep;
unsigned int mode;
+ unsigned int suspended_rate;
};
#endif /* __PLAT_KEYBOARD_H */
diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c
index 5f55885..b107922 100644
--- a/drivers/input/ff-memless.c
+++ b/drivers/input/ff-memless.c
@@ -176,7 +176,7 @@
value, envelope->attack_level);
time_from_level = jiffies_to_msecs(now - state->play_at);
time_of_envelope = envelope->attack_length;
- envelope_level = min_t(__s16, envelope->attack_level, 0x7fff);
+ envelope_level = min_t(u16, envelope->attack_level, 0x7fff);
} else if (envelope->fade_length && effect->replay.length &&
time_after(now,
@@ -184,7 +184,7 @@
time_before(now, state->stop_at)) {
time_from_level = jiffies_to_msecs(state->stop_at - now);
time_of_envelope = envelope->fade_length;
- envelope_level = min_t(__s16, envelope->fade_level, 0x7fff);
+ envelope_level = min_t(u16, envelope->fade_level, 0x7fff);
} else
return value;
diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c
index f658086..70a16c7 100644
--- a/drivers/input/input-mt.c
+++ b/drivers/input/input-mt.c
@@ -135,7 +135,7 @@
*/
void input_mt_report_pointer_emulation(struct input_dev *dev, bool use_count)
{
- struct input_mt_slot *oldest = 0;
+ struct input_mt_slot *oldest = NULL;
int oldid = dev->trkid;
int count = 0;
int i;
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index c0e11ecc..c50fa75 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -332,6 +332,16 @@
To compile this driver as a module, choose M here: the
module will be called locomokbd.
+config KEYBOARD_LPC32XX
+ tristate "LPC32XX matrix key scanner support"
+ depends on ARCH_LPC32XX && OF
+ help
+ Say Y here if you want to use NXP LPC32XX SoC key scanner interface,
+ connected to a key matrix.
+
+ To compile this driver as a module, choose M here: the
+ module will be called lpc32xx-keys.
+
config KEYBOARD_MAPLE
tristate "Maple bus keyboard"
depends on SH_DREAMCAST && MAPLE
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index b03b024..44e7600 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -26,6 +26,7 @@
obj-$(CONFIG_KEYBOARD_LM8323) += lm8323.o
obj-$(CONFIG_KEYBOARD_LM8333) += lm8333.o
obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o
+obj-$(CONFIG_KEYBOARD_LPC32XX) += lpc32xx-keys.o
obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o
obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o
obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 62bfce4..cbb1add 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -559,7 +559,6 @@
pdata->rep = !!of_get_property(node, "autorepeat", NULL);
/* First count the subnodes */
- pdata->nbuttons = 0;
pp = NULL;
while ((pp = of_get_next_child(node, pp)))
pdata->nbuttons++;
diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c
index 6ee7421..ff4c0a8 100644
--- a/drivers/input/keyboard/imx_keypad.c
+++ b/drivers/input/keyboard/imx_keypad.c
@@ -378,20 +378,24 @@
imx_keypad_inhibit(keypad);
/* Disable clock unit */
- clk_disable(keypad->clk);
+ clk_disable_unprepare(keypad->clk);
}
static int imx_keypad_open(struct input_dev *dev)
{
struct imx_keypad *keypad = input_get_drvdata(dev);
+ int error;
dev_dbg(&dev->dev, ">%s\n", __func__);
+ /* Enable the kpp clock */
+ error = clk_prepare_enable(keypad->clk);
+ if (error)
+ return error;
+
/* We became active from now */
keypad->enabled = true;
- /* Enable the kpp clock */
- clk_enable(keypad->clk);
imx_keypad_config(keypad);
/* Sanity control, not all the rows must be actived now. */
@@ -467,7 +471,7 @@
goto failed_free_priv;
}
- keypad->clk = clk_get(&pdev->dev, "kpp");
+ keypad->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(keypad->clk)) {
dev_err(&pdev->dev, "failed to get keypad clock\n");
error = PTR_ERR(keypad->clk);
@@ -581,7 +585,7 @@
mutex_lock(&input_dev->mutex);
if (input_dev->users)
- clk_disable(kbd->clk);
+ clk_disable_unprepare(kbd->clk);
mutex_unlock(&input_dev->mutex);
@@ -596,18 +600,23 @@
struct platform_device *pdev = to_platform_device(dev);
struct imx_keypad *kbd = platform_get_drvdata(pdev);
struct input_dev *input_dev = kbd->input_dev;
+ int ret = 0;
if (device_may_wakeup(&pdev->dev))
disable_irq_wake(kbd->irq);
mutex_lock(&input_dev->mutex);
- if (input_dev->users)
- clk_enable(kbd->clk);
+ if (input_dev->users) {
+ ret = clk_prepare_enable(kbd->clk);
+ if (ret)
+ goto err_clk;
+ }
+err_clk:
mutex_unlock(&input_dev->mutex);
- return 0;
+ return ret;
}
#endif
diff --git a/drivers/input/keyboard/lpc32xx-keys.c b/drivers/input/keyboard/lpc32xx-keys.c
new file mode 100644
index 0000000..dd786c8
--- /dev/null
+++ b/drivers/input/keyboard/lpc32xx-keys.c
@@ -0,0 +1,394 @@
+/*
+ * NXP LPC32xx SoC Key Scan Interface
+ *
+ * Authors:
+ * Kevin Wells <kevin.wells@nxp.com>
+ * Roland Stigge <stigge@antcom.de>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ * Copyright (C) 2012 Roland Stigge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * This controller supports square key matrices from 1x1 up to 8x8
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/input/matrix_keypad.h>
+
+#define DRV_NAME "lpc32xx_keys"
+
+/*
+ * Key scanner register offsets
+ */
+#define LPC32XX_KS_DEB(x) ((x) + 0x00)
+#define LPC32XX_KS_STATE_COND(x) ((x) + 0x04)
+#define LPC32XX_KS_IRQ(x) ((x) + 0x08)
+#define LPC32XX_KS_SCAN_CTL(x) ((x) + 0x0C)
+#define LPC32XX_KS_FAST_TST(x) ((x) + 0x10)
+#define LPC32XX_KS_MATRIX_DIM(x) ((x) + 0x14) /* 1..8 */
+#define LPC32XX_KS_DATA(x, y) ((x) + 0x40 + ((y) << 2))
+
+#define LPC32XX_KSCAN_DEB_NUM_DEB_PASS(n) ((n) & 0xFF)
+
+#define LPC32XX_KSCAN_SCOND_IN_IDLE 0x0
+#define LPC32XX_KSCAN_SCOND_IN_SCANONCE 0x1
+#define LPC32XX_KSCAN_SCOND_IN_IRQGEN 0x2
+#define LPC32XX_KSCAN_SCOND_IN_SCAN_MATRIX 0x3
+
+#define LPC32XX_KSCAN_IRQ_PENDING_CLR 0x1
+
+#define LPC32XX_KSCAN_SCTRL_SCAN_DELAY(n) ((n) & 0xFF)
+
+#define LPC32XX_KSCAN_FTST_FORCESCANONCE 0x1
+#define LPC32XX_KSCAN_FTST_USE32K_CLK 0x2
+
+#define LPC32XX_KSCAN_MSEL_SELECT(n) ((n) & 0xF)
+
+struct lpc32xx_kscan_drv {
+ struct input_dev *input;
+ struct clk *clk;
+ struct resource *iores;
+ void __iomem *kscan_base;
+ unsigned int irq;
+
+ u32 matrix_sz; /* Size of matrix in XxY, ie. 3 = 3x3 */
+ u32 deb_clks; /* Debounce clocks (based on 32KHz clock) */
+ u32 scan_delay; /* Scan delay (based on 32KHz clock) */
+
+ unsigned short *keymap; /* Pointer to key map for the scan matrix */
+ unsigned int row_shift;
+
+ u8 lastkeystates[8];
+};
+
+static void lpc32xx_mod_states(struct lpc32xx_kscan_drv *kscandat, int col)
+{
+ struct input_dev *input = kscandat->input;
+ unsigned row, changed, scancode, keycode;
+ u8 key;
+
+ key = readl(LPC32XX_KS_DATA(kscandat->kscan_base, col));
+ changed = key ^ kscandat->lastkeystates[col];
+ kscandat->lastkeystates[col] = key;
+
+ for (row = 0; changed; row++, changed >>= 1) {
+ if (changed & 1) {
+ /* Key state changed, signal an event */
+ scancode = MATRIX_SCAN_CODE(row, col,
+ kscandat->row_shift);
+ keycode = kscandat->keymap[scancode];
+ input_event(input, EV_MSC, MSC_SCAN, scancode);
+ input_report_key(input, keycode, key & (1 << row));
+ }
+ }
+}
+
+static irqreturn_t lpc32xx_kscan_irq(int irq, void *dev_id)
+{
+ struct lpc32xx_kscan_drv *kscandat = dev_id;
+ int i;
+
+ for (i = 0; i < kscandat->matrix_sz; i++)
+ lpc32xx_mod_states(kscandat, i);
+
+ writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
+
+ input_sync(kscandat->input);
+
+ return IRQ_HANDLED;
+}
+
+static int lpc32xx_kscan_open(struct input_dev *dev)
+{
+ struct lpc32xx_kscan_drv *kscandat = input_get_drvdata(dev);
+ int error;
+
+ error = clk_prepare_enable(kscandat->clk);
+ if (error)
+ return error;
+
+ writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
+
+ return 0;
+}
+
+static void lpc32xx_kscan_close(struct input_dev *dev)
+{
+ struct lpc32xx_kscan_drv *kscandat = input_get_drvdata(dev);
+
+ writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
+ clk_disable_unprepare(kscandat->clk);
+}
+
+static int __devinit lpc32xx_parse_dt(struct device *dev,
+ struct lpc32xx_kscan_drv *kscandat)
+{
+ struct device_node *np = dev->of_node;
+ u32 rows = 0, columns = 0;
+
+ of_property_read_u32(np, "keypad,num-rows", &rows);
+ of_property_read_u32(np, "keypad,num-columns", &columns);
+ if (!rows || rows != columns) {
+ dev_err(dev,
+ "rows and columns must be specified and be equal!\n");
+ return -EINVAL;
+ }
+
+ kscandat->matrix_sz = rows;
+ kscandat->row_shift = get_count_order(columns);
+
+ of_property_read_u32(np, "nxp,debounce-delay-ms", &kscandat->deb_clks);
+ of_property_read_u32(np, "nxp,scan-delay-ms", &kscandat->scan_delay);
+ if (!kscandat->deb_clks || !kscandat->scan_delay) {
+ dev_err(dev, "debounce or scan delay not specified\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int __devinit lpc32xx_kscan_probe(struct platform_device *pdev)
+{
+ struct lpc32xx_kscan_drv *kscandat;
+ struct input_dev *input;
+ struct resource *res;
+ size_t keymap_size;
+ int error;
+ int irq;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to get platform I/O memory\n");
+ return -EINVAL;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0 || irq >= NR_IRQS) {
+ dev_err(&pdev->dev, "failed to get platform irq\n");
+ return -EINVAL;
+ }
+
+ kscandat = kzalloc(sizeof(struct lpc32xx_kscan_drv), GFP_KERNEL);
+ if (!kscandat) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ error = lpc32xx_parse_dt(&pdev->dev, kscandat);
+ if (error) {
+ dev_err(&pdev->dev, "failed to parse device tree\n");
+ goto err_free_mem;
+ }
+
+ keymap_size = sizeof(kscandat->keymap[0]) *
+ (kscandat->matrix_sz << kscandat->row_shift);
+ kscandat->keymap = kzalloc(keymap_size, GFP_KERNEL);
+ if (!kscandat->keymap) {
+ dev_err(&pdev->dev, "could not allocate memory for keymap\n");
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ kscandat->input = input = input_allocate_device();
+ if (!input) {
+ dev_err(&pdev->dev, "failed to allocate input device\n");
+ error = -ENOMEM;
+ goto err_free_keymap;
+ }
+
+ /* Setup key input */
+ input->name = pdev->name;
+ input->phys = "lpc32xx/input0";
+ input->id.vendor = 0x0001;
+ input->id.product = 0x0001;
+ input->id.version = 0x0100;
+ input->open = lpc32xx_kscan_open;
+ input->close = lpc32xx_kscan_close;
+ input->dev.parent = &pdev->dev;
+
+ input_set_capability(input, EV_MSC, MSC_SCAN);
+
+ error = matrix_keypad_build_keymap(NULL, NULL,
+ kscandat->matrix_sz,
+ kscandat->matrix_sz,
+ kscandat->keymap, kscandat->input);
+ if (error) {
+ dev_err(&pdev->dev, "failed to build keymap\n");
+ goto err_free_input;
+ }
+
+ input_set_drvdata(kscandat->input, kscandat);
+
+ kscandat->iores = request_mem_region(res->start, resource_size(res),
+ pdev->name);
+ if (!kscandat->iores) {
+ dev_err(&pdev->dev, "failed to request I/O memory\n");
+ error = -EBUSY;
+ goto err_free_input;
+ }
+
+ kscandat->kscan_base = ioremap(kscandat->iores->start,
+ resource_size(kscandat->iores));
+ if (!kscandat->kscan_base) {
+ dev_err(&pdev->dev, "failed to remap I/O memory\n");
+ error = -EBUSY;
+ goto err_release_memregion;
+ }
+
+ /* Get the key scanner clock */
+ kscandat->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(kscandat->clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ error = PTR_ERR(kscandat->clk);
+ goto err_unmap;
+ }
+
+ /* Configure the key scanner */
+ error = clk_prepare_enable(kscandat->clk);
+ if (error)
+ goto err_clk_put;
+
+ writel(kscandat->deb_clks, LPC32XX_KS_DEB(kscandat->kscan_base));
+ writel(kscandat->scan_delay, LPC32XX_KS_SCAN_CTL(kscandat->kscan_base));
+ writel(LPC32XX_KSCAN_FTST_USE32K_CLK,
+ LPC32XX_KS_FAST_TST(kscandat->kscan_base));
+ writel(kscandat->matrix_sz,
+ LPC32XX_KS_MATRIX_DIM(kscandat->kscan_base));
+ writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
+ clk_disable_unprepare(kscandat->clk);
+
+ error = request_irq(irq, lpc32xx_kscan_irq, 0, pdev->name, kscandat);
+ if (error) {
+ dev_err(&pdev->dev, "failed to request irq\n");
+ goto err_clk_put;
+ }
+
+ error = input_register_device(kscandat->input);
+ if (error) {
+ dev_err(&pdev->dev, "failed to register input device\n");
+ goto err_free_irq;
+ }
+
+ platform_set_drvdata(pdev, kscandat);
+ return 0;
+
+err_free_irq:
+ free_irq(irq, kscandat);
+err_clk_put:
+ clk_put(kscandat->clk);
+err_unmap:
+ iounmap(kscandat->kscan_base);
+err_release_memregion:
+ release_mem_region(kscandat->iores->start,
+ resource_size(kscandat->iores));
+err_free_input:
+ input_free_device(kscandat->input);
+err_free_keymap:
+ kfree(kscandat->keymap);
+err_free_mem:
+ kfree(kscandat);
+
+ return error;
+}
+
+static int __devexit lpc32xx_kscan_remove(struct platform_device *pdev)
+{
+ struct lpc32xx_kscan_drv *kscandat = platform_get_drvdata(pdev);
+
+ free_irq(platform_get_irq(pdev, 0), kscandat);
+ clk_put(kscandat->clk);
+ iounmap(kscandat->kscan_base);
+ release_mem_region(kscandat->iores->start,
+ resource_size(kscandat->iores));
+ input_unregister_device(kscandat->input);
+ kfree(kscandat->keymap);
+ kfree(kscandat);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int lpc32xx_kscan_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct lpc32xx_kscan_drv *kscandat = platform_get_drvdata(pdev);
+ struct input_dev *input = kscandat->input;
+
+ mutex_lock(&input->mutex);
+
+ if (input->users) {
+ /* Clear IRQ and disable clock */
+ writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
+ clk_disable_unprepare(kscandat->clk);
+ }
+
+ mutex_unlock(&input->mutex);
+ return 0;
+}
+
+static int lpc32xx_kscan_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct lpc32xx_kscan_drv *kscandat = platform_get_drvdata(pdev);
+ struct input_dev *input = kscandat->input;
+ int retval = 0;
+
+ mutex_lock(&input->mutex);
+
+ if (input->users) {
+ /* Enable clock and clear IRQ */
+ retval = clk_prepare_enable(kscandat->clk);
+ if (retval == 0)
+ writel(1, LPC32XX_KS_IRQ(kscandat->kscan_base));
+ }
+
+ mutex_unlock(&input->mutex);
+ return retval;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(lpc32xx_kscan_pm_ops, lpc32xx_kscan_suspend,
+ lpc32xx_kscan_resume);
+
+static const struct of_device_id lpc32xx_kscan_match[] = {
+ { .compatible = "nxp,lpc3220-key" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, lpc32xx_kscan_match);
+
+static struct platform_driver lpc32xx_kscan_driver = {
+ .probe = lpc32xx_kscan_probe,
+ .remove = __devexit_p(lpc32xx_kscan_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ .pm = &lpc32xx_kscan_pm_ops,
+ .of_match_table = of_match_ptr(lpc32xx_kscan_match),
+ }
+};
+
+module_platform_driver(lpc32xx_kscan_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
+MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
+MODULE_DESCRIPTION("Key scanner driver for LPC32XX devices");
diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c
index 4ea4341..a880e74 100644
--- a/drivers/input/keyboard/nomadik-ske-keypad.c
+++ b/drivers/input/keyboard/nomadik-ske-keypad.c
@@ -49,6 +49,7 @@
#define SKE_ASR3 0x2C
#define SKE_NUM_ASRX_REGISTERS (4)
+#define KEY_PRESSED_DELAY 10
/**
* struct ske_keypad - data structure used by keypad driver
@@ -92,7 +93,7 @@
static int __init ske_keypad_chip_init(struct ske_keypad *keypad)
{
u32 value;
- int timeout = 50;
+ int timeout = keypad->board->debounce_ms;
/* check SKE_RIS to be 0 */
while ((readl(keypad->reg_base + SKE_RIS) != 0x00000000) && timeout--)
@@ -135,12 +136,37 @@
return 0;
}
+static void ske_keypad_report(struct ske_keypad *keypad, u8 status, int col)
+{
+ int row = 0, code, pos;
+ struct input_dev *input = keypad->input;
+ u32 ske_ris;
+ int key_pressed;
+ int num_of_rows;
+
+ /* find out the row */
+ num_of_rows = hweight8(status);
+ do {
+ pos = __ffs(status);
+ row = pos;
+ status &= ~(1 << pos);
+
+ code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT);
+ ske_ris = readl(keypad->reg_base + SKE_RIS);
+ key_pressed = ske_ris & SKE_KPRISA;
+
+ input_event(input, EV_MSC, MSC_SCAN, code);
+ input_report_key(input, keypad->keymap[code], key_pressed);
+ input_sync(input);
+ num_of_rows--;
+ } while (num_of_rows);
+}
+
static void ske_keypad_read_data(struct ske_keypad *keypad)
{
- struct input_dev *input = keypad->input;
- u16 status;
- int col = 0, row = 0, code;
- int ske_asr, ske_ris, key_pressed, i;
+ u8 status;
+ int col = 0;
+ int ske_asr, i;
/*
* Read the auto scan registers
@@ -154,44 +180,38 @@
if (!ske_asr)
continue;
- /* now that ASRx is zero, find out the column x and row y*/
- if (ske_asr & 0xff) {
+ /* now that ASRx is zero, find out the coloumn x and row y */
+ status = ske_asr & 0xff;
+ if (status) {
col = i * 2;
- status = ske_asr & 0xff;
- } else {
- col = (i * 2) + 1;
- status = (ske_asr & 0xff00) >> 8;
+ ske_keypad_report(keypad, status, col);
}
-
- /* find out the row */
- row = __ffs(status);
-
- code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT);
- ske_ris = readl(keypad->reg_base + SKE_RIS);
- key_pressed = ske_ris & SKE_KPRISA;
-
- input_event(input, EV_MSC, MSC_SCAN, code);
- input_report_key(input, keypad->keymap[code], key_pressed);
- input_sync(input);
+ status = (ske_asr & 0xff00) >> 8;
+ if (status) {
+ col = (i * 2) + 1;
+ ske_keypad_report(keypad, status, col);
+ }
}
}
static irqreturn_t ske_keypad_irq(int irq, void *dev_id)
{
struct ske_keypad *keypad = dev_id;
- int retries = 20;
+ int timeout = keypad->board->debounce_ms;
/* disable auto scan interrupt; mask the interrupt generated */
ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0);
ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA);
- while ((readl(keypad->reg_base + SKE_CR) & SKE_KPASON) && --retries)
- msleep(5);
+ while ((readl(keypad->reg_base + SKE_CR) & SKE_KPASON) && --timeout)
+ cpu_relax();
- if (retries) {
- /* SKEx registers are stable and can be read */
- ske_keypad_read_data(keypad);
- }
+ /* SKEx registers are stable and can be read */
+ ske_keypad_read_data(keypad);
+
+ /* wait until raw interrupt is clear */
+ while ((readl(keypad->reg_base + SKE_RIS)) && --timeout)
+ msleep(KEY_PRESSED_DELAY);
/* enable auto scan interrupts */
ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
index aed5f69..c05f98c 100644
--- a/drivers/input/keyboard/omap4-keypad.c
+++ b/drivers/input/keyboard/omap4-keypad.c
@@ -27,6 +27,7 @@
#include <linux/platform_device.h>
#include <linux/errno.h>
#include <linux/io.h>
+#include <linux/of.h>
#include <linux/input.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
@@ -84,8 +85,9 @@
u32 reg_offset;
u32 irqreg_offset;
unsigned int row_shift;
+ bool no_autorepeat;
unsigned char key_state[8];
- unsigned short keymap[];
+ unsigned short *keymap;
};
static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset)
@@ -208,25 +210,51 @@
pm_runtime_put_sync(input->dev.parent);
}
+#ifdef CONFIG_OF
+static int __devinit omap4_keypad_parse_dt(struct device *dev,
+ struct omap4_keypad *keypad_data)
+{
+ struct device_node *np = dev->of_node;
+
+ if (!np) {
+ dev_err(dev, "missing DT data");
+ return -EINVAL;
+ }
+
+ of_property_read_u32(np, "keypad,num-rows", &keypad_data->rows);
+ of_property_read_u32(np, "keypad,num-columns", &keypad_data->cols);
+ if (!keypad_data->rows || !keypad_data->cols) {
+ dev_err(dev, "number of keypad rows/columns not specified\n");
+ return -EINVAL;
+ }
+
+ if (of_get_property(np, "linux,input-no-autorepeat", NULL))
+ keypad_data->no_autorepeat = true;
+
+ return 0;
+}
+#else
+static inline int omap4_keypad_parse_dt(struct device *dev,
+ struct omap4_keypad *keypad_data)
+{
+ return -ENOSYS;
+}
+#endif
+
static int __devinit omap4_keypad_probe(struct platform_device *pdev)
{
- const struct omap4_keypad_platform_data *pdata;
+ const struct omap4_keypad_platform_data *pdata =
+ dev_get_platdata(&pdev->dev);
+ const struct matrix_keymap_data *keymap_data =
+ pdata ? pdata->keymap_data : NULL;
struct omap4_keypad *keypad_data;
struct input_dev *input_dev;
struct resource *res;
- resource_size_t size;
- unsigned int row_shift, max_keys;
+ unsigned int max_keys;
int rev;
int irq;
int error;
- /* platform data */
- pdata = pdev->dev.platform_data;
- if (!pdata) {
- dev_err(&pdev->dev, "no platform data defined\n");
- return -EINVAL;
- }
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "no base address specified\n");
@@ -239,25 +267,24 @@
return -EINVAL;
}
- if (!pdata->keymap_data) {
- dev_err(&pdev->dev, "no keymap data defined\n");
- return -EINVAL;
- }
-
- row_shift = get_count_order(pdata->cols);
- max_keys = pdata->rows << row_shift;
-
- keypad_data = kzalloc(sizeof(struct omap4_keypad) +
- max_keys * sizeof(keypad_data->keymap[0]),
- GFP_KERNEL);
+ keypad_data = kzalloc(sizeof(struct omap4_keypad), GFP_KERNEL);
if (!keypad_data) {
dev_err(&pdev->dev, "keypad_data memory allocation failed\n");
return -ENOMEM;
}
- size = resource_size(res);
+ keypad_data->irq = irq;
- res = request_mem_region(res->start, size, pdev->name);
+ if (pdata) {
+ keypad_data->rows = pdata->rows;
+ keypad_data->cols = pdata->cols;
+ } else {
+ error = omap4_keypad_parse_dt(&pdev->dev, keypad_data);
+ if (error)
+ return error;
+ }
+
+ res = request_mem_region(res->start, resource_size(res), pdev->name);
if (!res) {
dev_err(&pdev->dev, "can't request mem region\n");
error = -EBUSY;
@@ -271,15 +298,11 @@
goto err_release_mem;
}
- keypad_data->irq = irq;
- keypad_data->row_shift = row_shift;
- keypad_data->rows = pdata->rows;
- keypad_data->cols = pdata->cols;
/*
- * Enable clocks for the keypad module so that we can read
- * revision register.
- */
+ * Enable clocks for the keypad module so that we can read
+ * revision register.
+ */
pm_runtime_enable(&pdev->dev);
error = pm_runtime_get_sync(&pdev->dev);
if (error) {
@@ -322,18 +345,29 @@
input_dev->open = omap4_keypad_open;
input_dev->close = omap4_keypad_close;
- error = matrix_keypad_build_keymap(pdata->keymap_data, NULL,
- pdata->rows, pdata->cols,
- keypad_data->keymap, input_dev);
- if (error) {
- dev_err(&pdev->dev, "failed to build keymap\n");
+ input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+ if (!keypad_data->no_autorepeat)
+ __set_bit(EV_REP, input_dev->evbit);
+
+ input_set_drvdata(input_dev, keypad_data);
+
+ keypad_data->row_shift = get_count_order(keypad_data->cols);
+ max_keys = keypad_data->rows << keypad_data->row_shift;
+ keypad_data->keymap = kzalloc(max_keys * sizeof(keypad_data->keymap[0]),
+ GFP_KERNEL);
+ if (!keypad_data->keymap) {
+ dev_err(&pdev->dev, "Not enough memory for keymap\n");
+ error = -ENOMEM;
goto err_free_input;
}
- __set_bit(EV_REP, input_dev->evbit);
- input_set_capability(input_dev, EV_MSC, MSC_SCAN);
-
- input_set_drvdata(input_dev, keypad_data);
+ error = matrix_keypad_build_keymap(keymap_data, NULL,
+ keypad_data->rows, keypad_data->cols,
+ keypad_data->keymap, input_dev);
+ if (error) {
+ dev_err(&pdev->dev, "failed to build keymap\n");
+ goto err_free_keymap;
+ }
error = request_irq(keypad_data->irq, omap4_keypad_interrupt,
IRQF_TRIGGER_RISING,
@@ -357,6 +391,8 @@
err_pm_disable:
pm_runtime_disable(&pdev->dev);
free_irq(keypad_data->irq, keypad_data);
+err_free_keymap:
+ kfree(keypad_data->keymap);
err_free_input:
input_free_device(input_dev);
err_pm_put_sync:
@@ -364,7 +400,7 @@
err_unmap:
iounmap(keypad_data->base);
err_release_mem:
- release_mem_region(res->start, size);
+ release_mem_region(res->start, resource_size(res));
err_free_keypad:
kfree(keypad_data);
return error;
@@ -386,18 +422,29 @@
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(res->start, resource_size(res));
+ kfree(keypad_data->keymap);
kfree(keypad_data);
+
platform_set_drvdata(pdev, NULL);
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id omap_keypad_dt_match[] = {
+ { .compatible = "ti,omap4-keypad" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, omap_keypad_dt_match);
+#endif
+
static struct platform_driver omap4_keypad_driver = {
.probe = omap4_keypad_probe,
.remove = __devexit_p(omap4_keypad_remove),
.driver = {
.name = "omap4-keypad",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(omap_keypad_dt_match),
},
};
module_platform_driver(omap4_keypad_driver);
diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c
index 6f287f7..72ef01b 100644
--- a/drivers/input/keyboard/spear-keyboard.c
+++ b/drivers/input/keyboard/spear-keyboard.c
@@ -27,33 +27,31 @@
#include <plat/keyboard.h>
/* Keyboard Registers */
-#define MODE_REG 0x00 /* 16 bit reg */
-#define STATUS_REG 0x0C /* 2 bit reg */
-#define DATA_REG 0x10 /* 8 bit reg */
+#define MODE_CTL_REG 0x00
+#define STATUS_REG 0x0C
+#define DATA_REG 0x10
#define INTR_MASK 0x54
/* Register Values */
-/*
- * pclk freq mask = (APB FEQ -1)= 82 MHZ.Programme bit 15-9 in mode
- * control register as 1010010(82MHZ)
- */
-#define PCLK_FREQ_MSK 0xA400 /* 82 MHz */
-#define START_SCAN 0x0100
-#define SCAN_RATE_10 0x0000
-#define SCAN_RATE_20 0x0004
-#define SCAN_RATE_40 0x0008
-#define SCAN_RATE_80 0x000C
-#define MODE_KEYBOARD 0x0002
-#define DATA_AVAIL 0x2
-
-#define KEY_MASK 0xFF000000
-#define KEY_VALUE 0x00FFFFFF
-#define ROW_MASK 0xF0
-#define COLUMN_MASK 0x0F
#define NUM_ROWS 16
#define NUM_COLS 16
+#define MODE_CTL_PCLK_FREQ_SHIFT 9
+#define MODE_CTL_PCLK_FREQ_MSK 0x7F
-#define KEY_MATRIX_SHIFT 6
+#define MODE_CTL_KEYBOARD (0x2 << 0)
+#define MODE_CTL_SCAN_RATE_10 (0x0 << 2)
+#define MODE_CTL_SCAN_RATE_20 (0x1 << 2)
+#define MODE_CTL_SCAN_RATE_40 (0x2 << 2)
+#define MODE_CTL_SCAN_RATE_80 (0x3 << 2)
+#define MODE_CTL_KEYNUM_SHIFT 6
+#define MODE_CTL_START_SCAN (0x1 << 8)
+
+#define STATUS_DATA_AVAIL (0x1 << 1)
+
+#define DATA_ROW_MASK 0xF0
+#define DATA_COLUMN_MASK 0x0F
+
+#define ROW_SHIFT 4
struct spear_kbd {
struct input_dev *input;
@@ -65,6 +63,8 @@
unsigned short last_key;
unsigned short keycodes[NUM_ROWS * NUM_COLS];
bool rep;
+ unsigned int suspended_rate;
+ u32 mode_ctl_reg;
};
static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id)
@@ -72,10 +72,10 @@
struct spear_kbd *kbd = dev_id;
struct input_dev *input = kbd->input;
unsigned int key;
- u8 sts, val;
+ u32 sts, val;
- sts = readb(kbd->io_base + STATUS_REG);
- if (!(sts & DATA_AVAIL))
+ sts = readl_relaxed(kbd->io_base + STATUS_REG);
+ if (!(sts & STATUS_DATA_AVAIL))
return IRQ_NONE;
if (kbd->last_key != KEY_RESERVED) {
@@ -84,7 +84,8 @@
}
/* following reads active (row, col) pair */
- val = readb(kbd->io_base + DATA_REG);
+ val = readl_relaxed(kbd->io_base + DATA_REG) &
+ (DATA_ROW_MASK | DATA_COLUMN_MASK);
key = kbd->keycodes[val];
input_event(input, EV_MSC, MSC_SCAN, val);
@@ -94,7 +95,7 @@
kbd->last_key = key;
/* clear interrupt */
- writeb(0, kbd->io_base + STATUS_REG);
+ writel_relaxed(0, kbd->io_base + STATUS_REG);
return IRQ_HANDLED;
}
@@ -103,7 +104,7 @@
{
struct spear_kbd *kbd = input_get_drvdata(dev);
int error;
- u16 val;
+ u32 val;
kbd->last_key = KEY_RESERVED;
@@ -111,16 +112,20 @@
if (error)
return error;
+ /* keyboard rate to be programmed is input clock (in MHz) - 1 */
+ val = clk_get_rate(kbd->clk) / 1000000 - 1;
+ val = (val & MODE_CTL_PCLK_FREQ_MSK) << MODE_CTL_PCLK_FREQ_SHIFT;
+
/* program keyboard */
- val = SCAN_RATE_80 | MODE_KEYBOARD | PCLK_FREQ_MSK |
- (kbd->mode << KEY_MATRIX_SHIFT);
- writew(val, kbd->io_base + MODE_REG);
- writeb(1, kbd->io_base + STATUS_REG);
+ val = MODE_CTL_SCAN_RATE_80 | MODE_CTL_KEYBOARD | val |
+ (kbd->mode << MODE_CTL_KEYNUM_SHIFT);
+ writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
+ writel_relaxed(1, kbd->io_base + STATUS_REG);
/* start key scan */
- val = readw(kbd->io_base + MODE_REG);
- val |= START_SCAN;
- writew(val, kbd->io_base + MODE_REG);
+ val = readl_relaxed(kbd->io_base + MODE_CTL_REG);
+ val |= MODE_CTL_START_SCAN;
+ writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
return 0;
}
@@ -128,12 +133,12 @@
static void spear_kbd_close(struct input_dev *dev)
{
struct spear_kbd *kbd = input_get_drvdata(dev);
- u16 val;
+ u32 val;
/* stop key scan */
- val = readw(kbd->io_base + MODE_REG);
- val &= ~START_SCAN;
- writew(val, kbd->io_base + MODE_REG);
+ val = readl_relaxed(kbd->io_base + MODE_CTL_REG);
+ val &= ~MODE_CTL_START_SCAN;
+ writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
clk_disable(kbd->clk);
@@ -146,7 +151,7 @@
{
struct device_node *np = pdev->dev.of_node;
int error;
- u32 val;
+ u32 val, suspended_rate;
if (!np) {
dev_err(&pdev->dev, "Missing DT data\n");
@@ -156,6 +161,9 @@
if (of_property_read_bool(np, "autorepeat"))
kbd->rep = true;
+ if (of_property_read_u32(np, "suspended_rate", &suspended_rate))
+ kbd->suspended_rate = suspended_rate;
+
error = of_property_read_u32(np, "st,mode", &val);
if (error) {
dev_err(&pdev->dev, "DT: Invalid or missing mode\n");
@@ -213,6 +221,7 @@
} else {
kbd->mode = pdata->mode;
kbd->rep = pdata->rep;
+ kbd->suspended_rate = pdata->suspended_rate;
}
kbd->res = request_mem_region(res->start, resource_size(res),
@@ -302,7 +311,7 @@
release_mem_region(kbd->res->start, resource_size(kbd->res));
kfree(kbd);
- device_init_wakeup(&pdev->dev, 1);
+ device_init_wakeup(&pdev->dev, 0);
platform_set_drvdata(pdev, NULL);
return 0;
@@ -314,15 +323,48 @@
struct platform_device *pdev = to_platform_device(dev);
struct spear_kbd *kbd = platform_get_drvdata(pdev);
struct input_dev *input_dev = kbd->input;
+ unsigned int rate = 0, mode_ctl_reg, val;
mutex_lock(&input_dev->mutex);
- if (input_dev->users)
- clk_enable(kbd->clk);
+ /* explicitly enable clock as we may program device */
+ clk_enable(kbd->clk);
- if (device_may_wakeup(&pdev->dev))
+ mode_ctl_reg = readl_relaxed(kbd->io_base + MODE_CTL_REG);
+
+ if (device_may_wakeup(&pdev->dev)) {
enable_irq_wake(kbd->irq);
+ /*
+ * reprogram the keyboard operating frequency as on some
+ * platform it may change during system suspended
+ */
+ if (kbd->suspended_rate)
+ rate = kbd->suspended_rate / 1000000 - 1;
+ else
+ rate = clk_get_rate(kbd->clk) / 1000000 - 1;
+
+ val = mode_ctl_reg &
+ ~(MODE_CTL_PCLK_FREQ_MSK << MODE_CTL_PCLK_FREQ_SHIFT);
+ val |= (rate & MODE_CTL_PCLK_FREQ_MSK)
+ << MODE_CTL_PCLK_FREQ_SHIFT;
+ writel_relaxed(val, kbd->io_base + MODE_CTL_REG);
+
+ } else {
+ if (input_dev->users) {
+ writel_relaxed(mode_ctl_reg & ~MODE_CTL_START_SCAN,
+ kbd->io_base + MODE_CTL_REG);
+ clk_disable(kbd->clk);
+ }
+ }
+
+ /* store current configuration */
+ if (input_dev->users)
+ kbd->mode_ctl_reg = mode_ctl_reg;
+
+ /* restore previous clk state */
+ clk_disable(kbd->clk);
+
mutex_unlock(&input_dev->mutex);
return 0;
@@ -336,11 +378,16 @@
mutex_lock(&input_dev->mutex);
- if (device_may_wakeup(&pdev->dev))
+ if (device_may_wakeup(&pdev->dev)) {
disable_irq_wake(kbd->irq);
+ } else {
+ if (input_dev->users)
+ clk_enable(kbd->clk);
+ }
+ /* restore current configuration */
if (input_dev->users)
- clk_enable(kbd->clk);
+ writel_relaxed(kbd->mode_ctl_reg, kbd->io_base + MODE_CTL_REG);
mutex_unlock(&input_dev->mutex);
diff --git a/drivers/input/misc/ab8500-ponkey.c b/drivers/input/misc/ab8500-ponkey.c
index 350fd0c..84ec691 100644
--- a/drivers/input/misc/ab8500-ponkey.c
+++ b/drivers/input/misc/ab8500-ponkey.c
@@ -13,6 +13,7 @@
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/mfd/abx500/ab8500.h>
+#include <linux/of.h>
#include <linux/slab.h>
/**
@@ -131,10 +132,18 @@
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id ab8500_ponkey_match[] = {
+ { .compatible = "stericsson,ab8500-ponkey", },
+ {}
+};
+#endif
+
static struct platform_driver ab8500_ponkey_driver = {
.driver = {
.name = "ab8500-poweron-key",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(ab8500_ponkey_match),
},
.probe = ab8500_ponkey_probe,
.remove = __devexit_p(ab8500_ponkey_remove),
diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c
index c34f6c0..c8a288a 100644
--- a/drivers/input/misc/twl6040-vibra.c
+++ b/drivers/input/misc/twl6040-vibra.c
@@ -251,7 +251,6 @@
return 0;
}
-
#endif
static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL);
@@ -259,13 +258,19 @@
static int __devinit twl6040_vibra_probe(struct platform_device *pdev)
{
struct twl6040_vibra_data *pdata = pdev->dev.platform_data;
- struct device_node *node = pdev->dev.of_node;
+ struct device *twl6040_core_dev = pdev->dev.parent;
+ struct device_node *twl6040_core_node = NULL;
struct vibra_info *info;
int vddvibl_uV = 0;
int vddvibr_uV = 0;
int ret;
- if (!pdata && !node) {
+#ifdef CONFIG_OF
+ twl6040_core_node = of_find_node_by_name(twl6040_core_dev->of_node,
+ "vibra");
+#endif
+
+ if (!pdata && !twl6040_core_node) {
dev_err(&pdev->dev, "platform_data not available\n");
return -EINVAL;
}
@@ -287,14 +292,18 @@
vddvibl_uV = pdata->vddvibl_uV;
vddvibr_uV = pdata->vddvibr_uV;
} else {
- of_property_read_u32(node, "vibldrv_res", &info->vibldrv_res);
- of_property_read_u32(node, "vibrdrv_res", &info->vibrdrv_res);
- of_property_read_u32(node, "viblmotor_res",
+ of_property_read_u32(twl6040_core_node, "ti,vibldrv-res",
+ &info->vibldrv_res);
+ of_property_read_u32(twl6040_core_node, "ti,vibrdrv-res",
+ &info->vibrdrv_res);
+ of_property_read_u32(twl6040_core_node, "ti,viblmotor-res",
&info->viblmotor_res);
- of_property_read_u32(node, "vibrmotor_res",
+ of_property_read_u32(twl6040_core_node, "ti,vibrmotor-res",
&info->vibrmotor_res);
- of_property_read_u32(node, "vddvibl_uV", &vddvibl_uV);
- of_property_read_u32(node, "vddvibr_uV", &vddvibr_uV);
+ of_property_read_u32(twl6040_core_node, "ti,vddvibl-uV",
+ &vddvibl_uV);
+ of_property_read_u32(twl6040_core_node, "ti,vddvibr-uV",
+ &vddvibr_uV);
}
if ((!info->vibldrv_res && !info->viblmotor_res) ||
@@ -351,8 +360,12 @@
info->supplies[0].supply = "vddvibl";
info->supplies[1].supply = "vddvibr";
- ret = regulator_bulk_get(info->dev, ARRAY_SIZE(info->supplies),
- info->supplies);
+ /*
+ * When booted with Device tree the regulators are attached to the
+ * parent device (twl6040 MFD core)
+ */
+ ret = regulator_bulk_get(pdata ? info->dev : twl6040_core_dev,
+ ARRAY_SIZE(info->supplies), info->supplies);
if (ret) {
dev_err(info->dev, "couldn't get regulators %d\n", ret);
goto err_regulator;
@@ -418,12 +431,6 @@
return 0;
}
-static const struct of_device_id twl6040_vibra_of_match[] = {
- {.compatible = "ti,twl6040-vibra", },
- { },
-};
-MODULE_DEVICE_TABLE(of, twl6040_vibra_of_match);
-
static struct platform_driver twl6040_vibra_driver = {
.probe = twl6040_vibra_probe,
.remove = __devexit_p(twl6040_vibra_remove),
@@ -431,7 +438,6 @@
.name = "twl6040-vibra",
.owner = THIS_MODULE,
.pm = &twl6040_vibra_pm_ops,
- .of_match_table = twl6040_vibra_of_match,
},
};
module_platform_driver(twl6040_vibra_driver);
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index c703d53..d5b390f 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -139,6 +139,35 @@
}
/*
+ * Read the board id from the touchpad
+ * The board id is encoded in the "QUERY MODES" response
+ */
+static int synaptics_board_id(struct psmouse *psmouse)
+{
+ struct synaptics_data *priv = psmouse->private;
+ unsigned char bid[3];
+
+ if (synaptics_send_cmd(psmouse, SYN_QUE_MODES, bid))
+ return -1;
+ priv->board_id = ((bid[0] & 0xfc) << 6) | bid[1];
+ return 0;
+}
+
+/*
+ * Read the firmware id from the touchpad
+ */
+static int synaptics_firmware_id(struct psmouse *psmouse)
+{
+ struct synaptics_data *priv = psmouse->private;
+ unsigned char fwid[3];
+
+ if (synaptics_send_cmd(psmouse, SYN_QUE_FIRMWARE_ID, fwid))
+ return -1;
+ priv->firmware_id = (fwid[0] << 16) | (fwid[1] << 8) | fwid[2];
+ return 0;
+}
+
+/*
* Read the capability-bits from the touchpad
* see also the SYN_CAP_* macros
*/
@@ -261,6 +290,10 @@
return -1;
if (synaptics_model_id(psmouse))
return -1;
+ if (synaptics_firmware_id(psmouse))
+ return -1;
+ if (synaptics_board_id(psmouse))
+ return -1;
if (synaptics_capability(psmouse))
return -1;
if (synaptics_resolution(psmouse))
@@ -1435,11 +1468,12 @@
priv->pkt_type = SYN_MODEL_NEWABS(priv->model_id) ? SYN_NEWABS : SYN_OLDABS;
psmouse_info(psmouse,
- "Touchpad model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx\n",
+ "Touchpad model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx, board id: %lu, fw id: %lu\n",
SYN_ID_MODEL(priv->identity),
SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity),
priv->model_id,
- priv->capabilities, priv->ext_cap, priv->ext_cap_0c);
+ priv->capabilities, priv->ext_cap, priv->ext_cap_0c,
+ priv->board_id, priv->firmware_id);
set_input_params(psmouse->dev, priv);
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index fd26ccc..e594af0b 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -18,6 +18,7 @@
#define SYN_QUE_SERIAL_NUMBER_SUFFIX 0x07
#define SYN_QUE_RESOLUTION 0x08
#define SYN_QUE_EXT_CAPAB 0x09
+#define SYN_QUE_FIRMWARE_ID 0x0a
#define SYN_QUE_EXT_CAPAB_0C 0x0c
#define SYN_QUE_EXT_MAX_COORDS 0x0d
#define SYN_QUE_EXT_MIN_COORDS 0x0f
@@ -148,6 +149,8 @@
struct synaptics_data {
/* Data read from the touchpad */
unsigned long int model_id; /* Model-ID */
+ unsigned long int firmware_id; /* Firmware-ID */
+ unsigned long int board_id; /* Board-ID */
unsigned long int capabilities; /* Capabilities */
unsigned long int ext_cap; /* Extended Capabilities */
unsigned long int ext_cap_0c; /* Ext Caps from 0x0c query */
diff --git a/drivers/input/mouse/synaptics_usb.c b/drivers/input/mouse/synaptics_usb.c
index 3c5eaaa..64cf34e 100644
--- a/drivers/input/mouse/synaptics_usb.c
+++ b/drivers/input/mouse/synaptics_usb.c
@@ -364,7 +364,7 @@
le16_to_cpu(udev->descriptor.idProduct));
if (synusb->flags & SYNUSB_STICK)
- strlcat(synusb->name, " (Stick) ", sizeof(synusb->name));
+ strlcat(synusb->name, " (Stick)", sizeof(synusb->name));
usb_make_path(udev, synusb->phys, sizeof(synusb->phys));
strlcat(synusb->phys, "/input0", sizeof(synusb->phys));
diff --git a/drivers/input/tablet/hanwang.c b/drivers/input/tablet/hanwang.c
index b2db3cf..5cc0412 100644
--- a/drivers/input/tablet/hanwang.c
+++ b/drivers/input/tablet/hanwang.c
@@ -63,6 +63,7 @@
enum hanwang_tablet_type {
HANWANG_ART_MASTER_III,
HANWANG_ART_MASTER_HD,
+ HANWANG_ART_MASTER_II,
};
struct hanwang {
@@ -99,6 +100,8 @@
ART_MASTER_PKGLEN_MAX, 0x7f00, 0x4f60, 0x3f, 0x7f, 2048 },
{ 0x8401, "Hanwang Art Master HD 5012", HANWANG_ART_MASTER_HD,
ART_MASTER_PKGLEN_MAX, 0x678e, 0x4150, 0x3f, 0x7f, 1024 },
+ { 0x8503, "Hanwang Art Master II", HANWANG_ART_MASTER_II,
+ ART_MASTER_PKGLEN_MAX, 0x27de, 0x1cfe, 0x3f, 0x7f, 1024 },
};
static const int hw_eventtypes[] = {
@@ -127,14 +130,30 @@
struct usb_device *dev = hanwang->usbdev;
enum hanwang_tablet_type type = hanwang->features->type;
int i;
- u16 x, y, p;
+ u16 p;
+
+ if (type == HANWANG_ART_MASTER_II) {
+ hanwang->current_tool = BTN_TOOL_PEN;
+ hanwang->current_id = STYLUS_DEVICE_ID;
+ }
switch (data[0]) {
case 0x02: /* data packet */
switch (data[1]) {
case 0x80: /* tool prox out */
- hanwang->current_id = 0;
- input_report_key(input_dev, hanwang->current_tool, 0);
+ if (type != HANWANG_ART_MASTER_II) {
+ hanwang->current_id = 0;
+ input_report_key(input_dev,
+ hanwang->current_tool, 0);
+ }
+ break;
+
+ case 0x00: /* artmaster ii pen leave */
+ if (type == HANWANG_ART_MASTER_II) {
+ hanwang->current_id = 0;
+ input_report_key(input_dev,
+ hanwang->current_tool, 0);
+ }
break;
case 0xc2: /* first time tool prox in */
@@ -154,15 +173,12 @@
default:
hanwang->current_id = 0;
dev_dbg(&dev->dev,
- "unknown tablet tool %02x ", data[0]);
+ "unknown tablet tool %02x\n", data[0]);
break;
}
break;
default: /* tool data packet */
- x = (data[2] << 8) | data[3];
- y = (data[4] << 8) | data[5];
-
switch (type) {
case HANWANG_ART_MASTER_III:
p = (data[6] << 3) |
@@ -171,6 +187,7 @@
break;
case HANWANG_ART_MASTER_HD:
+ case HANWANG_ART_MASTER_II:
p = (data[7] >> 6) | (data[6] << 2);
break;
@@ -180,17 +197,23 @@
}
input_report_abs(input_dev, ABS_X,
- le16_to_cpup((__le16 *)&x));
+ be16_to_cpup((__be16 *)&data[2]));
input_report_abs(input_dev, ABS_Y,
- le16_to_cpup((__le16 *)&y));
- input_report_abs(input_dev, ABS_PRESSURE,
- le16_to_cpup((__le16 *)&p));
+ be16_to_cpup((__be16 *)&data[4]));
+ input_report_abs(input_dev, ABS_PRESSURE, p);
input_report_abs(input_dev, ABS_TILT_X, data[7] & 0x3f);
input_report_abs(input_dev, ABS_TILT_Y, data[8] & 0x7f);
input_report_key(input_dev, BTN_STYLUS, data[1] & 0x02);
- input_report_key(input_dev, BTN_STYLUS2, data[1] & 0x04);
+
+ if (type != HANWANG_ART_MASTER_II)
+ input_report_key(input_dev, BTN_STYLUS2,
+ data[1] & 0x04);
+ else
+ input_report_key(input_dev, BTN_TOOL_PEN, 1);
+
break;
}
+
input_report_abs(input_dev, ABS_MISC, hanwang->current_id);
input_event(input_dev, EV_MSC, MSC_SERIAL,
hanwang->features->pid);
@@ -202,8 +225,8 @@
switch (type) {
case HANWANG_ART_MASTER_III:
- input_report_key(input_dev, BTN_TOOL_FINGER, data[1] ||
- data[2] || data[3]);
+ input_report_key(input_dev, BTN_TOOL_FINGER,
+ data[1] || data[2] || data[3]);
input_report_abs(input_dev, ABS_WHEEL, data[1]);
input_report_key(input_dev, BTN_0, data[2]);
for (i = 0; i < 8; i++)
@@ -227,6 +250,10 @@
BTN_5 + i, data[6] & (1 << i));
}
break;
+
+ case HANWANG_ART_MASTER_II:
+ dev_dbg(&dev->dev, "error packet %02x\n", data[0]);
+ return;
}
input_report_abs(input_dev, ABS_MISC, hanwang->current_id);
@@ -234,7 +261,7 @@
break;
default:
- dev_dbg(&dev->dev, "error packet %02x ", data[0]);
+ dev_dbg(&dev->dev, "error packet %02x\n", data[0]);
break;
}
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 8b31473..0d3219f 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -445,8 +445,7 @@
/* ask to report Wacom data */
if (features->device_type == BTN_TOOL_FINGER) {
/* if it is an MT Tablet PC touch */
- if (features->type == TABLETPC2FG ||
- features->type == MTSCREEN) {
+ if (features->type > TABLETPC) {
do {
rep_data[0] = 3;
rep_data[1] = 4;
@@ -465,7 +464,7 @@
} while ((error < 0 || rep_data[1] != 4) &&
limit++ < WAC_MSG_RETRIES);
}
- } else if (features->type != TABLETPC &&
+ } else if (features->type <= BAMBOO_PT &&
features->type != WIRELESS &&
features->device_type == BTN_TOOL_PEN) {
do {
@@ -509,16 +508,13 @@
if (intf->cur_altsetting->desc.bInterfaceNumber == 0) {
features->device_type = 0;
} else if (intf->cur_altsetting->desc.bInterfaceNumber == 2) {
- features->device_type = BTN_TOOL_DOUBLETAP;
+ features->device_type = BTN_TOOL_FINGER;
features->pktlen = WACOM_PKGLEN_BBTOUCH3;
}
}
/* only devices that support touch need to retrieve the info */
- if (features->type != TABLETPC &&
- features->type != TABLETPC2FG &&
- features->type != BAMBOO_PT &&
- features->type != MTSCREEN) {
+ if (features->type < BAMBOO_PT) {
goto out;
}
@@ -860,6 +856,7 @@
/* Initialize default values */
switch (wacom->wacom_wac.features.type) {
+ case INTUOS4S:
case INTUOS4:
case INTUOS4L:
wacom->led.select[0] = 0;
@@ -913,6 +910,7 @@
static void wacom_destroy_leds(struct wacom *wacom)
{
switch (wacom->wacom_wac.features.type) {
+ case INTUOS4S:
case INTUOS4:
case INTUOS4L:
sysfs_remove_group(&wacom->intf->dev.kobj,
@@ -972,6 +970,10 @@
error = power_supply_register(&wacom->usbdev->dev,
&wacom->battery);
+
+ if (!error)
+ power_supply_powers(&wacom->battery,
+ &wacom->usbdev->dev);
}
return error;
@@ -979,8 +981,11 @@
static void wacom_destroy_battery(struct wacom *wacom)
{
- if (wacom->wacom_wac.features.quirks & WACOM_QUIRK_MONITOR)
+ if (wacom->wacom_wac.features.quirks & WACOM_QUIRK_MONITOR &&
+ wacom->battery.dev) {
power_supply_unregister(&wacom->battery);
+ wacom->battery.dev = NULL;
+ }
}
static int wacom_register_input(struct wacom *wacom)
@@ -1027,23 +1032,30 @@
struct wacom *wacom = container_of(work, struct wacom, work);
struct usb_device *usbdev = wacom->usbdev;
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
+ struct wacom *wacom1, *wacom2;
+ struct wacom_wac *wacom_wac1, *wacom_wac2;
+ int error;
/*
* Regardless if this is a disconnect or a new tablet,
- * remove any existing input devices.
+ * remove any existing input and battery devices.
*/
+ wacom_destroy_battery(wacom);
+
/* Stylus interface */
- wacom = usb_get_intfdata(usbdev->config->interface[1]);
- if (wacom->wacom_wac.input)
- input_unregister_device(wacom->wacom_wac.input);
- wacom->wacom_wac.input = NULL;
+ wacom1 = usb_get_intfdata(usbdev->config->interface[1]);
+ wacom_wac1 = &(wacom1->wacom_wac);
+ if (wacom_wac1->input)
+ input_unregister_device(wacom_wac1->input);
+ wacom_wac1->input = NULL;
/* Touch interface */
- wacom = usb_get_intfdata(usbdev->config->interface[2]);
- if (wacom->wacom_wac.input)
- input_unregister_device(wacom->wacom_wac.input);
- wacom->wacom_wac.input = NULL;
+ wacom2 = usb_get_intfdata(usbdev->config->interface[2]);
+ wacom_wac2 = &(wacom2->wacom_wac);
+ if (wacom_wac2->input)
+ input_unregister_device(wacom_wac2->input);
+ wacom_wac2->input = NULL;
if (wacom_wac->pid == 0) {
dev_info(&wacom->intf->dev, "wireless tablet disconnected\n");
@@ -1068,24 +1080,39 @@
}
/* Stylus interface */
- wacom = usb_get_intfdata(usbdev->config->interface[1]);
- wacom_wac = &wacom->wacom_wac;
- wacom_wac->features =
+ wacom_wac1->features =
*((struct wacom_features *)id->driver_info);
- wacom_wac->features.device_type = BTN_TOOL_PEN;
- wacom_register_input(wacom);
+ wacom_wac1->features.device_type = BTN_TOOL_PEN;
+ error = wacom_register_input(wacom1);
+ if (error)
+ goto fail1;
/* Touch interface */
- wacom = usb_get_intfdata(usbdev->config->interface[2]);
- wacom_wac = &wacom->wacom_wac;
- wacom_wac->features =
+ wacom_wac2->features =
*((struct wacom_features *)id->driver_info);
- wacom_wac->features.pktlen = WACOM_PKGLEN_BBTOUCH3;
- wacom_wac->features.device_type = BTN_TOOL_FINGER;
- wacom_set_phy_from_res(&wacom_wac->features);
- wacom_wac->features.x_max = wacom_wac->features.y_max = 4096;
- wacom_register_input(wacom);
+ wacom_wac2->features.pktlen = WACOM_PKGLEN_BBTOUCH3;
+ wacom_wac2->features.device_type = BTN_TOOL_FINGER;
+ wacom_set_phy_from_res(&wacom_wac2->features);
+ wacom_wac2->features.x_max = wacom_wac2->features.y_max = 4096;
+ error = wacom_register_input(wacom2);
+ if (error)
+ goto fail2;
+
+ error = wacom_initialize_battery(wacom);
+ if (error)
+ goto fail3;
}
+
+ return;
+
+fail3:
+ input_unregister_device(wacom_wac2->input);
+ wacom_wac2->input = NULL;
+fail2:
+ input_unregister_device(wacom_wac1->input);
+ wacom_wac1->input = NULL;
+fail1:
+ return;
}
static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
@@ -1149,10 +1176,7 @@
features->device_type = BTN_TOOL_FINGER;
features->pktlen = WACOM_PKGLEN_BBTOUCH3;
- features->x_phy =
- (features->x_max * 100) / features->x_resolution;
- features->y_phy =
- (features->y_max * 100) / features->y_resolution;
+ wacom_set_phy_from_res(features);
features->x_max = 4096;
features->y_max = 4096;
@@ -1188,14 +1212,10 @@
if (error)
goto fail4;
- error = wacom_initialize_battery(wacom);
- if (error)
- goto fail5;
-
if (!(features->quirks & WACOM_QUIRK_NO_INPUT)) {
error = wacom_register_input(wacom);
if (error)
- goto fail6;
+ goto fail5;
}
/* Note that if query fails it is not a hard failure */
@@ -1210,7 +1230,6 @@
return 0;
- fail6: wacom_destroy_battery(wacom);
fail5: wacom_destroy_leds(wacom);
fail4: wacom_remove_shared_data(wacom_wac);
fail3: usb_free_urb(wacom->irq);
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 004bc1b..6533f44 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -248,7 +248,7 @@
input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
if (wacom->tool[0] != BTN_TOOL_MOUSE) {
- input_report_abs(input, ABS_PRESSURE, data[6] | ((data[7] & 0x01) << 8));
+ input_report_abs(input, ABS_PRESSURE, data[6] | ((data[7] & 0x03) << 8));
input_report_key(input, BTN_TOUCH, data[1] & 0x01);
input_report_key(input, BTN_STYLUS, data[1] & 0x02);
input_report_key(input, BTN_STYLUS2, data[1] & 0x04);
@@ -888,7 +888,7 @@
prox = data[0] & 0x01;
x = get_unaligned_le16(&data[1]);
y = get_unaligned_le16(&data[3]);
- } else { /* with capacity */
+ } else {
prox = data[1] & 0x01;
x = le16_to_cpup((__le16 *)&data[2]);
y = le16_to_cpup((__le16 *)&data[4]);
@@ -961,6 +961,7 @@
case WACOM_REPORT_TPC1FG:
case WACOM_REPORT_TPCHID:
case WACOM_REPORT_TPCST:
+ case WACOM_REPORT_TPC1FGE:
return wacom_tpc_single_touch(wacom, len);
case WACOM_REPORT_TPCMT:
@@ -1244,6 +1245,7 @@
break;
case TABLETPC:
+ case TABLETPCE:
case TABLETPC2FG:
case MTSCREEN:
sync = wacom_tpc_irq(wacom_wac, len);
@@ -1317,10 +1319,8 @@
}
/* these device have multiple inputs */
- if (features->type == TABLETPC || features->type == TABLETPC2FG ||
- features->type == BAMBOO_PT || features->type == WIRELESS ||
- (features->type >= INTUOS5S && features->type <= INTUOS5L) ||
- features->type == MTSCREEN)
+ if (features->type >= WIRELESS ||
+ (features->type >= INTUOS5S && features->type <= INTUOS5L))
features->quirks |= WACOM_QUIRK_MULTI_INPUT;
/* quirk for bamboo touch with 2 low res touches */
@@ -1547,10 +1547,8 @@
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
break;
- case TABLETPC2FG:
case MTSCREEN:
if (features->device_type == BTN_TOOL_FINGER) {
-
wacom_wac->slots = kmalloc(features->touch_max *
sizeof(int),
GFP_KERNEL);
@@ -1559,7 +1557,11 @@
for (i = 0; i < features->touch_max; i++)
wacom_wac->slots[i] = -1;
+ }
+ /* fall through */
+ case TABLETPC2FG:
+ if (features->device_type == BTN_TOOL_FINGER) {
input_mt_init_slots(input_dev, features->touch_max);
input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
0, MT_TOOL_MAX, 0, 0);
@@ -1571,6 +1573,7 @@
/* fall through */
case TABLETPC:
+ case TABLETPCE:
__clear_bit(ABS_MISC, input_dev->absbit);
__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
@@ -1888,6 +1891,12 @@
static const struct wacom_features wacom_features_0xEC =
{ "Wacom ISDv4 EC", WACOM_PKGLEN_GRAPHIRE, 25710, 14500, 255,
0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0xED =
+ { "Wacom ISDv4 ED", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255,
+ 0, TABLETPCE, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0xEF =
+ { "Wacom ISDv4 EF", WACOM_PKGLEN_GRAPHIRE, 26202, 16325, 255,
+ 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x47 =
{ "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023,
31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -2062,6 +2071,8 @@
{ USB_DEVICE_WACOM(0xE5) },
{ USB_DEVICE_WACOM(0xE6) },
{ USB_DEVICE_WACOM(0xEC) },
+ { USB_DEVICE_WACOM(0xED) },
+ { USB_DEVICE_WACOM(0xEF) },
{ USB_DEVICE_WACOM(0x47) },
{ USB_DEVICE_WACOM(0xF4) },
{ USB_DEVICE_LENOVO(0x6004) },
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 78fbd3f..bd5d37b 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -48,6 +48,7 @@
#define WACOM_REPORT_TPCMT 13
#define WACOM_REPORT_TPCHID 15
#define WACOM_REPORT_TPCST 16
+#define WACOM_REPORT_TPC1FGE 18
/* device quirks */
#define WACOM_QUIRK_MULTI_INPUT 0x0001
@@ -62,8 +63,6 @@
PTU,
PL,
DTU,
- BAMBOO_PT,
- WIRELESS,
INTUOS,
INTUOS3S,
INTUOS3,
@@ -79,7 +78,10 @@
CINTIQ,
WACOM_BEE,
WACOM_MO,
- TABLETPC,
+ WIRELESS,
+ BAMBOO_PT,
+ TABLETPC, /* add new TPC below */
+ TABLETPCE,
TABLETPC2FG,
MTSCREEN,
MAX_TYPE
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 98d2635..73bd2f6 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -369,6 +369,18 @@
To compile this driver as a module, choose M here: the
module will be called mcs5000_ts.
+config TOUCHSCREEN_MMS114
+ tristate "MELFAS MMS114 touchscreen"
+ depends on I2C
+ help
+ Say Y here if you have the MELFAS MMS114 touchscreen controller
+ chip in your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mms114.
+
config TOUCHSCREEN_MTOUCH
tristate "MicroTouch serial touchscreens"
select SERIO
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index eb8bfe1..5920c60 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -38,6 +38,7 @@
obj-$(CONFIG_TOUCHSCREEN_MC13783) += mc13783_ts.o
obj-$(CONFIG_TOUCHSCREEN_MCS5000) += mcs5000_ts.o
obj-$(CONFIG_TOUCHSCREEN_MIGOR) += migor_ts.o
+obj-$(CONFIG_TOUCHSCREEN_MMS114) += mms114.o
obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o
obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o
obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o
diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c
index bd4eb42..facd305 100644
--- a/drivers/input/touchscreen/ad7879.c
+++ b/drivers/input/touchscreen/ad7879.c
@@ -118,6 +118,7 @@
unsigned int irq;
bool disabled; /* P: input->mutex */
bool suspended; /* P: input->mutex */
+ bool swap_xy;
u16 conversion_data[AD7879_NR_SENSE];
char phys[32];
u8 first_conversion_delay;
@@ -161,6 +162,9 @@
z1 = ts->conversion_data[AD7879_SEQ_Z1] & MAX_12BIT;
z2 = ts->conversion_data[AD7879_SEQ_Z2] & MAX_12BIT;
+ if (ts->swap_xy)
+ swap(x, y);
+
/*
* The samples processed here are already preprocessed by the AD7879.
* The preprocessing function consists of a median and an averaging
@@ -520,6 +524,7 @@
ts->dev = dev;
ts->input = input_dev;
ts->irq = irq;
+ ts->swap_xy = pdata->swap_xy;
setup_timer(&ts->timer, ad7879_timer, (unsigned long) ts);
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 25fd056..4623cc6 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -36,6 +36,7 @@
#define MXT_FW_NAME "maxtouch.fw"
/* Registers */
+#define MXT_INFO 0x00
#define MXT_FAMILY_ID 0x00
#define MXT_VARIANT_ID 0x01
#define MXT_VERSION 0x02
@@ -194,6 +195,7 @@
#define MXT_BOOT_STATUS_MASK 0x3f
/* Touch status */
+#define MXT_UNGRIP (1 << 0)
#define MXT_SUPPRESS (1 << 1)
#define MXT_AMP (1 << 2)
#define MXT_VECTOR (1 << 3)
@@ -210,8 +212,6 @@
/* Touchscreen absolute values */
#define MXT_MAX_AREA 0xff
-#define MXT_MAX_FINGER 10
-
struct mxt_info {
u8 family_id;
u8 variant_id;
@@ -225,44 +225,37 @@
struct mxt_object {
u8 type;
u16 start_address;
- u8 size;
- u8 instances;
+ u8 size; /* Size of each instance - 1 */
+ u8 instances; /* Number of instances - 1 */
u8 num_report_ids;
-
- /* to map object and message */
- u8 max_reportid;
-};
+} __packed;
struct mxt_message {
u8 reportid;
u8 message[7];
};
-struct mxt_finger {
- int status;
- int x;
- int y;
- int area;
- int pressure;
-};
-
/* Each client has this additional data */
struct mxt_data {
struct i2c_client *client;
struct input_dev *input_dev;
+ char phys[64]; /* device physical location */
const struct mxt_platform_data *pdata;
struct mxt_object *object_table;
struct mxt_info info;
- struct mxt_finger finger[MXT_MAX_FINGER];
unsigned int irq;
unsigned int max_x;
unsigned int max_y;
+
+ /* Cached parameters from object table */
+ u8 T6_reportid;
+ u8 T9_reportid_min;
+ u8 T9_reportid_max;
};
static bool mxt_object_readable(unsigned int type)
{
switch (type) {
- case MXT_GEN_MESSAGE_T5:
case MXT_GEN_COMMAND_T6:
case MXT_GEN_POWER_T7:
case MXT_GEN_ACQUIRE_T8:
@@ -396,6 +389,7 @@
{
struct i2c_msg xfer[2];
u8 buf[2];
+ int ret;
buf[0] = reg & 0xff;
buf[1] = (reg >> 8) & 0xff;
@@ -412,12 +406,17 @@
xfer[1].len = len;
xfer[1].buf = val;
- if (i2c_transfer(client->adapter, xfer, 2) != 2) {
- dev_err(&client->dev, "%s: i2c transfer failed\n", __func__);
- return -EIO;
+ ret = i2c_transfer(client->adapter, xfer, 2);
+ if (ret == 2) {
+ ret = 0;
+ } else {
+ if (ret >= 0)
+ ret = -EIO;
+ dev_err(&client->dev, "%s: i2c transfer failed (%d)\n",
+ __func__, ret);
}
- return 0;
+ return ret;
}
static int mxt_read_reg(struct i2c_client *client, u16 reg, u8 *val)
@@ -425,27 +424,39 @@
return __mxt_read_reg(client, reg, 1, val);
}
-static int mxt_write_reg(struct i2c_client *client, u16 reg, u8 val)
+static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len,
+ const void *val)
{
- u8 buf[3];
+ u8 *buf;
+ size_t count;
+ int ret;
+
+ count = len + 2;
+ buf = kmalloc(count, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
buf[0] = reg & 0xff;
buf[1] = (reg >> 8) & 0xff;
- buf[2] = val;
+ memcpy(&buf[2], val, len);
- if (i2c_master_send(client, buf, 3) != 3) {
- dev_err(&client->dev, "%s: i2c send failed\n", __func__);
- return -EIO;
+ ret = i2c_master_send(client, buf, count);
+ if (ret == count) {
+ ret = 0;
+ } else {
+ if (ret >= 0)
+ ret = -EIO;
+ dev_err(&client->dev, "%s: i2c send failed (%d)\n",
+ __func__, ret);
}
- return 0;
+ kfree(buf);
+ return ret;
}
-static int mxt_read_object_table(struct i2c_client *client,
- u16 reg, u8 *object_buf)
+static int mxt_write_reg(struct i2c_client *client, u16 reg, u8 val)
{
- return __mxt_read_reg(client, reg, MXT_OBJECT_SIZE,
- object_buf);
+ return __mxt_write_reg(client, reg, 1, &val);
}
static struct mxt_object *
@@ -479,20 +490,6 @@
sizeof(struct mxt_message), message);
}
-static int mxt_read_object(struct mxt_data *data,
- u8 type, u8 offset, u8 *val)
-{
- struct mxt_object *object;
- u16 reg;
-
- object = mxt_get_object(data, type);
- if (!object)
- return -EINVAL;
-
- reg = object->start_address;
- return __mxt_read_reg(data->client, reg + offset, 1, val);
-}
-
static int mxt_write_object(struct mxt_data *data,
u8 type, u8 offset, u8 val)
{
@@ -507,75 +504,17 @@
return mxt_write_reg(data->client, reg + offset, val);
}
-static void mxt_input_report(struct mxt_data *data, int single_id)
-{
- struct mxt_finger *finger = data->finger;
- struct input_dev *input_dev = data->input_dev;
- int status = finger[single_id].status;
- int finger_num = 0;
- int id;
-
- for (id = 0; id < MXT_MAX_FINGER; id++) {
- if (!finger[id].status)
- continue;
-
- input_mt_slot(input_dev, id);
- input_mt_report_slot_state(input_dev, MT_TOOL_FINGER,
- finger[id].status != MXT_RELEASE);
-
- if (finger[id].status != MXT_RELEASE) {
- finger_num++;
- input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR,
- finger[id].area);
- input_report_abs(input_dev, ABS_MT_POSITION_X,
- finger[id].x);
- input_report_abs(input_dev, ABS_MT_POSITION_Y,
- finger[id].y);
- input_report_abs(input_dev, ABS_MT_PRESSURE,
- finger[id].pressure);
- } else {
- finger[id].status = 0;
- }
- }
-
- input_report_key(input_dev, BTN_TOUCH, finger_num > 0);
-
- if (status != MXT_RELEASE) {
- input_report_abs(input_dev, ABS_X, finger[single_id].x);
- input_report_abs(input_dev, ABS_Y, finger[single_id].y);
- input_report_abs(input_dev,
- ABS_PRESSURE, finger[single_id].pressure);
- }
-
- input_sync(input_dev);
-}
-
static void mxt_input_touchevent(struct mxt_data *data,
struct mxt_message *message, int id)
{
- struct mxt_finger *finger = data->finger;
struct device *dev = &data->client->dev;
u8 status = message->message[0];
+ struct input_dev *input_dev = data->input_dev;
int x;
int y;
int area;
int pressure;
- /* Check the touch is present on the screen */
- if (!(status & MXT_DETECT)) {
- if (status & MXT_RELEASE) {
- dev_dbg(dev, "[%d] released\n", id);
-
- finger[id].status = MXT_RELEASE;
- mxt_input_report(data, id);
- }
- return;
- }
-
- /* Check only AMP detection */
- if (!(status & (MXT_PRESS | MXT_MOVE)))
- return;
-
x = (message->message[1] << 4) | ((message->message[3] >> 4) & 0xf);
y = (message->message[2] << 4) | ((message->message[3] & 0xf));
if (data->max_x < 1024)
@@ -586,30 +525,50 @@
area = message->message[4];
pressure = message->message[5];
- dev_dbg(dev, "[%d] %s x: %d, y: %d, area: %d\n", id,
- status & MXT_MOVE ? "moved" : "pressed",
- x, y, area);
+ dev_dbg(dev,
+ "[%u] %c%c%c%c%c%c%c%c x: %5u y: %5u area: %3u amp: %3u\n",
+ id,
+ (status & MXT_DETECT) ? 'D' : '.',
+ (status & MXT_PRESS) ? 'P' : '.',
+ (status & MXT_RELEASE) ? 'R' : '.',
+ (status & MXT_MOVE) ? 'M' : '.',
+ (status & MXT_VECTOR) ? 'V' : '.',
+ (status & MXT_AMP) ? 'A' : '.',
+ (status & MXT_SUPPRESS) ? 'S' : '.',
+ (status & MXT_UNGRIP) ? 'U' : '.',
+ x, y, area, pressure);
- finger[id].status = status & MXT_MOVE ?
- MXT_MOVE : MXT_PRESS;
- finger[id].x = x;
- finger[id].y = y;
- finger[id].area = area;
- finger[id].pressure = pressure;
+ input_mt_slot(input_dev, id);
+ input_mt_report_slot_state(input_dev, MT_TOOL_FINGER,
+ status & MXT_DETECT);
- mxt_input_report(data, id);
+ if (status & MXT_DETECT) {
+ input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+ input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+ input_report_abs(input_dev, ABS_MT_PRESSURE, pressure);
+ input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, area);
+ }
+}
+
+static unsigned mxt_extract_T6_csum(const u8 *csum)
+{
+ return csum[0] | (csum[1] << 8) | (csum[2] << 16);
+}
+
+static bool mxt_is_T9_message(struct mxt_data *data, struct mxt_message *msg)
+{
+ u8 id = msg->reportid;
+ return (id >= data->T9_reportid_min && id <= data->T9_reportid_max);
}
static irqreturn_t mxt_interrupt(int irq, void *dev_id)
{
struct mxt_data *data = dev_id;
struct mxt_message message;
- struct mxt_object *object;
+ const u8 *payload = &message.message[0];
struct device *dev = &data->client->dev;
- int id;
u8 reportid;
- u8 max_reportid;
- u8 min_reportid;
+ bool update_input = false;
do {
if (mxt_read_message(data, &message)) {
@@ -619,21 +578,25 @@
reportid = message.reportid;
- /* whether reportid is thing of MXT_TOUCH_MULTI_T9 */
- object = mxt_get_object(data, MXT_TOUCH_MULTI_T9);
- if (!object)
- goto end;
-
- max_reportid = object->max_reportid;
- min_reportid = max_reportid - object->num_report_ids + 1;
- id = reportid - min_reportid;
-
- if (reportid >= min_reportid && reportid <= max_reportid)
+ if (reportid == data->T6_reportid) {
+ u8 status = payload[0];
+ unsigned csum = mxt_extract_T6_csum(&payload[1]);
+ dev_dbg(dev, "Status: %02x Config Checksum: %06x\n",
+ status, csum);
+ } else if (mxt_is_T9_message(data, &message)) {
+ int id = reportid - data->T9_reportid_min;
mxt_input_touchevent(data, &message, id);
- else
+ update_input = true;
+ } else {
mxt_dump_message(dev, &message);
+ }
} while (reportid != 0xff);
+ if (update_input) {
+ input_mt_report_pointer_emulation(data->input_dev, false);
+ input_sync(data->input_dev);
+ }
+
end:
return IRQ_HANDLED;
}
@@ -644,7 +607,8 @@
struct mxt_object *object;
struct device *dev = &data->client->dev;
int index = 0;
- int i, j, config_offset;
+ int i, size;
+ int ret;
if (!pdata->config) {
dev_dbg(dev, "No cfg data defined, skipping reg init\n");
@@ -657,18 +621,17 @@
if (!mxt_object_writable(object->type))
continue;
- for (j = 0;
- j < (object->size + 1) * (object->instances + 1);
- j++) {
- config_offset = index + j;
- if (config_offset > pdata->config_length) {
- dev_err(dev, "Not enough config data!\n");
- return -EINVAL;
- }
- mxt_write_object(data, object->type, j,
- pdata->config[config_offset]);
+ size = (object->size + 1) * (object->instances + 1);
+ if (index + size > pdata->config_length) {
+ dev_err(dev, "Not enough config data!\n");
+ return -EINVAL;
}
- index += (object->size + 1) * (object->instances + 1);
+
+ ret = __mxt_write_reg(data->client, object->start_address,
+ size, &pdata->config[index]);
+ if (ret)
+ return ret;
+ index += size;
}
return 0;
@@ -749,68 +712,76 @@
struct i2c_client *client = data->client;
struct mxt_info *info = &data->info;
int error;
- u8 val;
- error = mxt_read_reg(client, MXT_FAMILY_ID, &val);
+ /* Read 7-byte info block starting at address 0 */
+ error = __mxt_read_reg(client, MXT_INFO, sizeof(*info), info);
if (error)
return error;
- info->family_id = val;
-
- error = mxt_read_reg(client, MXT_VARIANT_ID, &val);
- if (error)
- return error;
- info->variant_id = val;
-
- error = mxt_read_reg(client, MXT_VERSION, &val);
- if (error)
- return error;
- info->version = val;
-
- error = mxt_read_reg(client, MXT_BUILD, &val);
- if (error)
- return error;
- info->build = val;
-
- error = mxt_read_reg(client, MXT_OBJECT_NUM, &val);
- if (error)
- return error;
- info->object_num = val;
return 0;
}
static int mxt_get_object_table(struct mxt_data *data)
{
+ struct i2c_client *client = data->client;
+ size_t table_size;
int error;
int i;
- u16 reg;
- u8 reportid = 0;
- u8 buf[MXT_OBJECT_SIZE];
+ u8 reportid;
+ table_size = data->info.object_num * sizeof(struct mxt_object);
+ error = __mxt_read_reg(client, MXT_OBJECT_START, table_size,
+ data->object_table);
+ if (error)
+ return error;
+
+ /* Valid Report IDs start counting from 1 */
+ reportid = 1;
for (i = 0; i < data->info.object_num; i++) {
struct mxt_object *object = data->object_table + i;
+ u8 min_id, max_id;
- reg = MXT_OBJECT_START + MXT_OBJECT_SIZE * i;
- error = mxt_read_object_table(data->client, reg, buf);
- if (error)
- return error;
-
- object->type = buf[0];
- object->start_address = (buf[2] << 8) | buf[1];
- object->size = buf[3];
- object->instances = buf[4];
- object->num_report_ids = buf[5];
+ le16_to_cpus(&object->start_address);
if (object->num_report_ids) {
+ min_id = reportid;
reportid += object->num_report_ids *
(object->instances + 1);
- object->max_reportid = reportid;
+ max_id = reportid - 1;
+ } else {
+ min_id = 0;
+ max_id = 0;
+ }
+
+ dev_dbg(&data->client->dev,
+ "Type %2d Start %3d Size %3d Instances %2d ReportIDs %3u : %3u\n",
+ object->type, object->start_address, object->size + 1,
+ object->instances + 1, min_id, max_id);
+
+ switch (object->type) {
+ case MXT_GEN_COMMAND_T6:
+ data->T6_reportid = min_id;
+ break;
+ case MXT_TOUCH_MULTI_T9:
+ data->T9_reportid_min = min_id;
+ data->T9_reportid_max = max_id;
+ break;
}
}
return 0;
}
+static void mxt_free_object_table(struct mxt_data *data)
+{
+ kfree(data->object_table);
+ data->object_table = NULL;
+ data->T6_reportid = 0;
+ data->T9_reportid_min = 0;
+ data->T9_reportid_max = 0;
+
+}
+
static int mxt_initialize(struct mxt_data *data)
{
struct i2c_client *client = data->client;
@@ -833,12 +804,12 @@
/* Get object table information */
error = mxt_get_object_table(data);
if (error)
- return error;
+ goto err_free_object_table;
/* Check register init values */
error = mxt_check_reg_init(data);
if (error)
- return error;
+ goto err_free_object_table;
mxt_handle_pdata(data);
@@ -856,25 +827,29 @@
/* Update matrix size at info struct */
error = mxt_read_reg(client, MXT_MATRIX_X_SIZE, &val);
if (error)
- return error;
+ goto err_free_object_table;
info->matrix_xsize = val;
error = mxt_read_reg(client, MXT_MATRIX_Y_SIZE, &val);
if (error)
- return error;
+ goto err_free_object_table;
info->matrix_ysize = val;
dev_info(&client->dev,
- "Family ID: %d Variant ID: %d Version: %d Build: %d\n",
- info->family_id, info->variant_id, info->version,
- info->build);
+ "Family ID: %u Variant ID: %u Major.Minor.Build: %u.%u.%02X\n",
+ info->family_id, info->variant_id, info->version >> 4,
+ info->version & 0xf, info->build);
dev_info(&client->dev,
- "Matrix X Size: %d Matrix Y Size: %d Object Num: %d\n",
+ "Matrix X Size: %u Matrix Y Size: %u Object Num: %u\n",
info->matrix_xsize, info->matrix_ysize,
info->object_num);
return 0;
+
+err_free_object_table:
+ mxt_free_object_table(data);
+ return error;
}
static void mxt_calc_resolution(struct mxt_data *data)
@@ -891,6 +866,44 @@
}
}
+/* Firmware Version is returned as Major.Minor.Build */
+static ssize_t mxt_fw_version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mxt_data *data = dev_get_drvdata(dev);
+ struct mxt_info *info = &data->info;
+ return scnprintf(buf, PAGE_SIZE, "%u.%u.%02X\n",
+ info->version >> 4, info->version & 0xf, info->build);
+}
+
+/* Hardware Version is returned as FamilyID.VariantID */
+static ssize_t mxt_hw_version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mxt_data *data = dev_get_drvdata(dev);
+ struct mxt_info *info = &data->info;
+ return scnprintf(buf, PAGE_SIZE, "%u.%u\n",
+ info->family_id, info->variant_id);
+}
+
+static ssize_t mxt_show_instance(char *buf, int count,
+ struct mxt_object *object, int instance,
+ const u8 *val)
+{
+ int i;
+
+ if (object->instances > 0)
+ count += scnprintf(buf + count, PAGE_SIZE - count,
+ "Instance %u\n", instance);
+
+ for (i = 0; i < object->size + 1; i++)
+ count += scnprintf(buf + count, PAGE_SIZE - count,
+ "\t[%2u]: %02x (%d)\n", i, val[i], val[i]);
+ count += scnprintf(buf + count, PAGE_SIZE - count, "\n");
+
+ return count;
+}
+
static ssize_t mxt_object_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -899,43 +912,38 @@
int count = 0;
int i, j;
int error;
- u8 val;
+ u8 *obuf;
+ /* Pre-allocate buffer large enough to hold max sized object. */
+ obuf = kmalloc(256, GFP_KERNEL);
+ if (!obuf)
+ return -ENOMEM;
+
+ error = 0;
for (i = 0; i < data->info.object_num; i++) {
object = data->object_table + i;
- count += snprintf(buf + count, PAGE_SIZE - count,
- "Object[%d] (Type %d)\n",
- i + 1, object->type);
- if (count >= PAGE_SIZE)
- return PAGE_SIZE - 1;
-
- if (!mxt_object_readable(object->type)) {
- count += snprintf(buf + count, PAGE_SIZE - count,
- "\n");
- if (count >= PAGE_SIZE)
- return PAGE_SIZE - 1;
+ if (!mxt_object_readable(object->type))
continue;
- }
- for (j = 0; j < object->size + 1; j++) {
- error = mxt_read_object(data,
- object->type, j, &val);
+ count += scnprintf(buf + count, PAGE_SIZE - count,
+ "T%u:\n", object->type);
+
+ for (j = 0; j < object->instances + 1; j++) {
+ u16 size = object->size + 1;
+ u16 addr = object->start_address + j * size;
+
+ error = __mxt_read_reg(data->client, addr, size, obuf);
if (error)
- return error;
+ goto done;
- count += snprintf(buf + count, PAGE_SIZE - count,
- "\t[%2d]: %02x (%d)\n", j, val, val);
- if (count >= PAGE_SIZE)
- return PAGE_SIZE - 1;
+ count = mxt_show_instance(buf, count, object, j, obuf);
}
-
- count += snprintf(buf + count, PAGE_SIZE - count, "\n");
- if (count >= PAGE_SIZE)
- return PAGE_SIZE - 1;
}
- return count;
+done:
+ kfree(obuf);
+ return error ?: count;
}
static int mxt_load_fw(struct device *dev, const char *fn)
@@ -1028,8 +1036,7 @@
/* Wait for reset */
msleep(MXT_FWRESET_TIME);
- kfree(data->object_table);
- data->object_table = NULL;
+ mxt_free_object_table(data);
mxt_initialize(data);
}
@@ -1043,10 +1050,14 @@
return count;
}
+static DEVICE_ATTR(fw_version, S_IRUGO, mxt_fw_version_show, NULL);
+static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store);
static struct attribute *mxt_attrs[] = {
+ &dev_attr_fw_version.attr,
+ &dev_attr_hw_version.attr,
&dev_attr_object.attr,
&dev_attr_update_fw.attr,
NULL
@@ -1093,6 +1104,7 @@
struct mxt_data *data;
struct input_dev *input_dev;
int error;
+ unsigned int num_mt_slots;
if (!pdata)
return -EINVAL;
@@ -1106,6 +1118,10 @@
}
input_dev->name = "Atmel maXTouch Touchscreen";
+ snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0",
+ client->adapter->nr, client->addr);
+ input_dev->phys = data->phys;
+
input_dev->id.bustype = BUS_I2C;
input_dev->dev.parent = &client->dev;
input_dev->open = mxt_input_open;
@@ -1118,6 +1134,10 @@
mxt_calc_resolution(data);
+ error = mxt_initialize(data);
+ if (error)
+ goto err_free_mem;
+
__set_bit(EV_ABS, input_dev->evbit);
__set_bit(EV_KEY, input_dev->evbit);
__set_bit(BTN_TOUCH, input_dev->keybit);
@@ -1131,7 +1151,10 @@
0, 255, 0, 0);
/* For multi touch */
- input_mt_init_slots(input_dev, MXT_MAX_FINGER);
+ num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
+ error = input_mt_init_slots(input_dev, num_mt_slots);
+ if (error)
+ goto err_free_object;
input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
0, MXT_MAX_AREA, 0, 0);
input_set_abs_params(input_dev, ABS_MT_POSITION_X,
@@ -1144,13 +1167,9 @@
input_set_drvdata(input_dev, data);
i2c_set_clientdata(client, data);
- error = mxt_initialize(data);
- if (error)
- goto err_free_object;
-
error = request_threaded_irq(client->irq, NULL, mxt_interrupt,
pdata->irqflags | IRQF_ONESHOT,
- client->dev.driver->name, data);
+ client->name, data);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
goto err_free_object;
diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c
new file mode 100644
index 0000000..49c44bb
--- /dev/null
+++ b/drivers/input/touchscreen/mms114.c
@@ -0,0 +1,544 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c/mms114.h>
+#include <linux/input/mt.h>
+#include <linux/interrupt.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+/* Write only registers */
+#define MMS114_MODE_CONTROL 0x01
+#define MMS114_OPERATION_MODE_MASK 0xE
+#define MMS114_ACTIVE (1 << 1)
+
+#define MMS114_XY_RESOLUTION_H 0x02
+#define MMS114_X_RESOLUTION 0x03
+#define MMS114_Y_RESOLUTION 0x04
+#define MMS114_CONTACT_THRESHOLD 0x05
+#define MMS114_MOVING_THRESHOLD 0x06
+
+/* Read only registers */
+#define MMS114_PACKET_SIZE 0x0F
+#define MMS114_INFOMATION 0x10
+#define MMS114_TSP_REV 0xF0
+
+/* Minimum delay time is 50us between stop and start signal of i2c */
+#define MMS114_I2C_DELAY 50
+
+/* 200ms needs after power on */
+#define MMS114_POWERON_DELAY 200
+
+/* Touchscreen absolute values */
+#define MMS114_MAX_AREA 0xff
+
+#define MMS114_MAX_TOUCH 10
+#define MMS114_PACKET_NUM 8
+
+/* Touch type */
+#define MMS114_TYPE_NONE 0
+#define MMS114_TYPE_TOUCHSCREEN 1
+#define MMS114_TYPE_TOUCHKEY 2
+
+struct mms114_data {
+ struct i2c_client *client;
+ struct input_dev *input_dev;
+ struct regulator *core_reg;
+ struct regulator *io_reg;
+ const struct mms114_platform_data *pdata;
+
+ /* Use cache data for mode control register(write only) */
+ u8 cache_mode_control;
+};
+
+struct mms114_touch {
+ u8 id:4, reserved_bit4:1, type:2, pressed:1;
+ u8 x_hi:4, y_hi:4;
+ u8 x_lo;
+ u8 y_lo;
+ u8 width;
+ u8 strength;
+ u8 reserved[2];
+} __packed;
+
+static int __mms114_read_reg(struct mms114_data *data, unsigned int reg,
+ unsigned int len, u8 *val)
+{
+ struct i2c_client *client = data->client;
+ struct i2c_msg xfer[2];
+ u8 buf = reg & 0xff;
+ int error;
+
+ if (reg <= MMS114_MODE_CONTROL && reg + len > MMS114_MODE_CONTROL)
+ BUG();
+
+ /* Write register: use repeated start */
+ xfer[0].addr = client->addr;
+ xfer[0].flags = I2C_M_TEN | I2C_M_NOSTART;
+ xfer[0].len = 1;
+ xfer[0].buf = &buf;
+
+ /* Read data */
+ xfer[1].addr = client->addr;
+ xfer[1].flags = I2C_M_RD;
+ xfer[1].len = len;
+ xfer[1].buf = val;
+
+ error = i2c_transfer(client->adapter, xfer, 2);
+ if (error != 2) {
+ dev_err(&client->dev,
+ "%s: i2c transfer failed (%d)\n", __func__, error);
+ return error < 0 ? error : -EIO;
+ }
+ udelay(MMS114_I2C_DELAY);
+
+ return 0;
+}
+
+static int mms114_read_reg(struct mms114_data *data, unsigned int reg)
+{
+ u8 val;
+ int error;
+
+ if (reg == MMS114_MODE_CONTROL)
+ return data->cache_mode_control;
+
+ error = __mms114_read_reg(data, reg, 1, &val);
+ return error < 0 ? error : val;
+}
+
+static int mms114_write_reg(struct mms114_data *data, unsigned int reg,
+ unsigned int val)
+{
+ struct i2c_client *client = data->client;
+ u8 buf[2];
+ int error;
+
+ buf[0] = reg & 0xff;
+ buf[1] = val & 0xff;
+
+ error = i2c_master_send(client, buf, 2);
+ if (error != 2) {
+ dev_err(&client->dev,
+ "%s: i2c send failed (%d)\n", __func__, error);
+ return error < 0 ? error : -EIO;
+ }
+ udelay(MMS114_I2C_DELAY);
+
+ if (reg == MMS114_MODE_CONTROL)
+ data->cache_mode_control = val;
+
+ return 0;
+}
+
+static void mms114_process_mt(struct mms114_data *data, struct mms114_touch *touch)
+{
+ const struct mms114_platform_data *pdata = data->pdata;
+ struct i2c_client *client = data->client;
+ struct input_dev *input_dev = data->input_dev;
+ unsigned int id;
+ unsigned int x;
+ unsigned int y;
+
+ if (touch->id > MMS114_MAX_TOUCH) {
+ dev_err(&client->dev, "Wrong touch id (%d)\n", touch->id);
+ return;
+ }
+
+ if (touch->type != MMS114_TYPE_TOUCHSCREEN) {
+ dev_err(&client->dev, "Wrong touch type (%d)\n", touch->type);
+ return;
+ }
+
+ id = touch->id - 1;
+ x = touch->x_lo | touch->x_hi << 8;
+ y = touch->y_lo | touch->y_hi << 8;
+ if (x > pdata->x_size || y > pdata->y_size) {
+ dev_dbg(&client->dev,
+ "Wrong touch coordinates (%d, %d)\n", x, y);
+ return;
+ }
+
+ if (pdata->x_invert)
+ x = pdata->x_size - x;
+ if (pdata->y_invert)
+ y = pdata->y_size - y;
+
+ dev_dbg(&client->dev,
+ "id: %d, type: %d, pressed: %d, x: %d, y: %d, width: %d, strength: %d\n",
+ id, touch->type, touch->pressed,
+ x, y, touch->width, touch->strength);
+
+ input_mt_slot(input_dev, id);
+ input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, touch->pressed);
+
+ if (touch->pressed) {
+ input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, touch->width);
+ input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+ input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+ input_report_abs(input_dev, ABS_MT_PRESSURE, touch->strength);
+ }
+}
+
+static irqreturn_t mms114_interrupt(int irq, void *dev_id)
+{
+ struct mms114_data *data = dev_id;
+ struct input_dev *input_dev = data->input_dev;
+ struct mms114_touch touch[MMS114_MAX_TOUCH];
+ int packet_size;
+ int touch_size;
+ int index;
+ int error;
+
+ mutex_lock(&input_dev->mutex);
+ if (!input_dev->users) {
+ mutex_unlock(&input_dev->mutex);
+ goto out;
+ }
+ mutex_unlock(&input_dev->mutex);
+
+ packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE);
+ if (packet_size <= 0)
+ goto out;
+
+ touch_size = packet_size / MMS114_PACKET_NUM;
+
+ error = __mms114_read_reg(data, MMS114_INFOMATION, packet_size,
+ (u8 *)touch);
+ if (error < 0)
+ goto out;
+
+ for (index = 0; index < touch_size; index++)
+ mms114_process_mt(data, touch + index);
+
+ input_mt_report_pointer_emulation(data->input_dev, true);
+ input_sync(data->input_dev);
+
+out:
+ return IRQ_HANDLED;
+}
+
+static int mms114_set_active(struct mms114_data *data, bool active)
+{
+ int val;
+
+ val = mms114_read_reg(data, MMS114_MODE_CONTROL);
+ if (val < 0)
+ return val;
+
+ val &= ~MMS114_OPERATION_MODE_MASK;
+
+ /* If active is false, sleep mode */
+ if (active)
+ val |= MMS114_ACTIVE;
+
+ return mms114_write_reg(data, MMS114_MODE_CONTROL, val);
+}
+
+static int mms114_get_version(struct mms114_data *data)
+{
+ struct device *dev = &data->client->dev;
+ u8 buf[6];
+ int error;
+
+ error = __mms114_read_reg(data, MMS114_TSP_REV, 6, buf);
+ if (error < 0)
+ return error;
+
+ dev_info(dev, "TSP Rev: 0x%x, HW Rev: 0x%x, Firmware Ver: 0x%x\n",
+ buf[0], buf[1], buf[3]);
+
+ return 0;
+}
+
+static int mms114_setup_regs(struct mms114_data *data)
+{
+ const struct mms114_platform_data *pdata = data->pdata;
+ int val;
+ int error;
+
+ error = mms114_get_version(data);
+ if (error < 0)
+ return error;
+
+ error = mms114_set_active(data, true);
+ if (error < 0)
+ return error;
+
+ val = (pdata->x_size >> 8) & 0xf;
+ val |= ((pdata->y_size >> 8) & 0xf) << 4;
+ error = mms114_write_reg(data, MMS114_XY_RESOLUTION_H, val);
+ if (error < 0)
+ return error;
+
+ val = pdata->x_size & 0xff;
+ error = mms114_write_reg(data, MMS114_X_RESOLUTION, val);
+ if (error < 0)
+ return error;
+
+ val = pdata->y_size & 0xff;
+ error = mms114_write_reg(data, MMS114_Y_RESOLUTION, val);
+ if (error < 0)
+ return error;
+
+ if (pdata->contact_threshold) {
+ error = mms114_write_reg(data, MMS114_CONTACT_THRESHOLD,
+ pdata->contact_threshold);
+ if (error < 0)
+ return error;
+ }
+
+ if (pdata->moving_threshold) {
+ error = mms114_write_reg(data, MMS114_MOVING_THRESHOLD,
+ pdata->moving_threshold);
+ if (error < 0)
+ return error;
+ }
+
+ return 0;
+}
+
+static int mms114_start(struct mms114_data *data)
+{
+ struct i2c_client *client = data->client;
+ int error;
+
+ if (data->core_reg)
+ regulator_enable(data->core_reg);
+ if (data->io_reg)
+ regulator_enable(data->io_reg);
+ mdelay(MMS114_POWERON_DELAY);
+
+ error = mms114_setup_regs(data);
+ if (error < 0)
+ return error;
+
+ if (data->pdata->cfg_pin)
+ data->pdata->cfg_pin(true);
+
+ enable_irq(client->irq);
+
+ return 0;
+}
+
+static void mms114_stop(struct mms114_data *data)
+{
+ struct i2c_client *client = data->client;
+
+ disable_irq(client->irq);
+
+ if (data->pdata->cfg_pin)
+ data->pdata->cfg_pin(false);
+
+ if (data->io_reg)
+ regulator_disable(data->io_reg);
+ if (data->core_reg)
+ regulator_disable(data->core_reg);
+}
+
+static int mms114_input_open(struct input_dev *dev)
+{
+ struct mms114_data *data = input_get_drvdata(dev);
+
+ return mms114_start(data);
+}
+
+static void mms114_input_close(struct input_dev *dev)
+{
+ struct mms114_data *data = input_get_drvdata(dev);
+
+ mms114_stop(data);
+}
+
+static int __devinit mms114_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct mms114_data *data;
+ struct input_dev *input_dev;
+ int error;
+
+ if (!client->dev.platform_data) {
+ dev_err(&client->dev, "Need platform data\n");
+ return -EINVAL;
+ }
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_PROTOCOL_MANGLING)) {
+ dev_err(&client->dev,
+ "Need i2c bus that supports protocol mangling\n");
+ return -ENODEV;
+ }
+
+ data = kzalloc(sizeof(struct mms114_data), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!data || !input_dev) {
+ dev_err(&client->dev, "Failed to allocate memory\n");
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ data->client = client;
+ data->input_dev = input_dev;
+ data->pdata = client->dev.platform_data;
+
+ input_dev->name = "MELPAS MMS114 Touchscreen";
+ input_dev->id.bustype = BUS_I2C;
+ input_dev->dev.parent = &client->dev;
+ input_dev->open = mms114_input_open;
+ input_dev->close = mms114_input_close;
+
+ __set_bit(EV_ABS, input_dev->evbit);
+ __set_bit(EV_KEY, input_dev->evbit);
+ __set_bit(BTN_TOUCH, input_dev->keybit);
+ input_set_abs_params(input_dev, ABS_X, 0, data->pdata->x_size, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, data->pdata->y_size, 0, 0);
+
+ /* For multi touch */
+ input_mt_init_slots(input_dev, MMS114_MAX_TOUCH);
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+ 0, MMS114_MAX_AREA, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+ 0, data->pdata->x_size, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+ 0, data->pdata->y_size, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_PRESSURE, 0, 255, 0, 0);
+
+ input_set_drvdata(input_dev, data);
+ i2c_set_clientdata(client, data);
+
+ data->core_reg = regulator_get(&client->dev, "avdd");
+ if (IS_ERR(data->core_reg)) {
+ error = PTR_ERR(data->core_reg);
+ dev_err(&client->dev,
+ "Unable to get the Core regulator (%d)\n", error);
+ goto err_free_mem;
+ }
+
+ data->io_reg = regulator_get(&client->dev, "vdd");
+ if (IS_ERR(data->io_reg)) {
+ error = PTR_ERR(data->io_reg);
+ dev_err(&client->dev,
+ "Unable to get the IO regulator (%d)\n", error);
+ goto err_core_reg;
+ }
+
+ error = request_threaded_irq(client->irq, NULL, mms114_interrupt,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "mms114", data);
+ if (error) {
+ dev_err(&client->dev, "Failed to register interrupt\n");
+ goto err_io_reg;
+ }
+ disable_irq(client->irq);
+
+ error = input_register_device(data->input_dev);
+ if (error)
+ goto err_free_irq;
+
+ return 0;
+
+err_free_irq:
+ free_irq(client->irq, data);
+err_io_reg:
+ regulator_put(data->io_reg);
+err_core_reg:
+ regulator_put(data->core_reg);
+err_free_mem:
+ input_free_device(input_dev);
+ kfree(data);
+ return error;
+}
+
+static int __devexit mms114_remove(struct i2c_client *client)
+{
+ struct mms114_data *data = i2c_get_clientdata(client);
+
+ free_irq(client->irq, data);
+ regulator_put(data->io_reg);
+ regulator_put(data->core_reg);
+ input_unregister_device(data->input_dev);
+ kfree(data);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mms114_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct mms114_data *data = i2c_get_clientdata(client);
+ struct input_dev *input_dev = data->input_dev;
+ int id;
+
+ /* Release all touch */
+ for (id = 0; id < MMS114_MAX_TOUCH; id++) {
+ input_mt_slot(input_dev, id);
+ input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, false);
+ }
+
+ input_mt_report_pointer_emulation(input_dev, true);
+ input_sync(input_dev);
+
+ mutex_lock(&input_dev->mutex);
+ if (input_dev->users)
+ mms114_stop(data);
+ mutex_unlock(&input_dev->mutex);
+
+ return 0;
+}
+
+static int mms114_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct mms114_data *data = i2c_get_clientdata(client);
+ struct input_dev *input_dev = data->input_dev;
+ int error;
+
+ mutex_lock(&input_dev->mutex);
+ if (input_dev->users) {
+ error = mms114_start(data);
+ if (error < 0) {
+ mutex_unlock(&input_dev->mutex);
+ return error;
+ }
+ }
+ mutex_unlock(&input_dev->mutex);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(mms114_pm_ops, mms114_suspend, mms114_resume);
+
+static const struct i2c_device_id mms114_id[] = {
+ { "mms114", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, mms114_id);
+
+static struct i2c_driver mms114_driver = {
+ .driver = {
+ .name = "mms114",
+ .owner = THIS_MODULE,
+ .pm = &mms114_pm_ops,
+ },
+ .probe = mms114_probe,
+ .remove = __devexit_p(mms114_remove),
+ .id_table = mms114_id,
+};
+
+module_i2c_driver(mms114_driver);
+
+/* Module information */
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_DESCRIPTION("MELFAS mms114 Touchscreen driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/wacom_i2c.c b/drivers/input/touchscreen/wacom_i2c.c
index 3557257..0c01657 100644
--- a/drivers/input/touchscreen/wacom_i2c.c
+++ b/drivers/input/touchscreen/wacom_i2c.c
@@ -149,7 +149,7 @@
{
struct wacom_i2c *wac_i2c;
struct input_dev *input;
- struct wacom_features features;
+ struct wacom_features features = { 0 };
int error;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
diff --git a/include/linux/i2c/mms114.h b/include/linux/i2c/mms114.h
new file mode 100644
index 0000000..5722ebf
--- /dev/null
+++ b/include/linux/i2c/mms114.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundationr
+ */
+
+#ifndef __LINUX_MMS114_H
+#define __LINUX_MMS114_H
+
+struct mms114_platform_data {
+ unsigned int x_size;
+ unsigned int y_size;
+ unsigned int contact_threshold;
+ unsigned int moving_threshold;
+ bool x_invert;
+ bool y_invert;
+
+ void (*cfg_pin)(bool);
+};
+
+#endif /* __LINUX_MMS114_H */
diff --git a/include/linux/input.h b/include/linux/input.h
index 2740d08..725dcd0 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -807,18 +807,20 @@
#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */
#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */
#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */
-#define ABS_MT_POSITION_X 0x35 /* Center X ellipse position */
-#define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */
+#define ABS_MT_POSITION_X 0x35 /* Center X touch position */
+#define ABS_MT_POSITION_Y 0x36 /* Center Y touch position */
#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */
#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */
#define ABS_MT_DISTANCE 0x3b /* Contact hover distance */
+#define ABS_MT_TOOL_X 0x3c /* Center X tool position */
+#define ABS_MT_TOOL_Y 0x3d /* Center Y tool position */
#ifdef __KERNEL__
/* Implementation details, userspace should not care about these */
#define ABS_MT_FIRST ABS_MT_TOUCH_MAJOR
-#define ABS_MT_LAST ABS_MT_DISTANCE
+#define ABS_MT_LAST ABS_MT_TOOL_Y
#endif
#define ABS_MAX 0x3f
diff --git a/include/linux/spi/ad7879.h b/include/linux/spi/ad7879.h
index 6334cee..58368be 100644
--- a/include/linux/spi/ad7879.h
+++ b/include/linux/spi/ad7879.h
@@ -12,6 +12,8 @@
u16 y_min, y_max;
u16 pressure_min, pressure_max;
+ bool swap_xy; /* swap x and y axes */
+
/* [0..255] 0=OFF Starts at 1=550us and goes
* all the way to 9.440ms in steps of 35us.
*/