/*
 * Copyright 2018 Advanced Micro Devices, Inc.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 * OTHER DEALINGS IN THE SOFTWARE.
 *
 * Authors: AMD
 *
 */

#include "dccg.h"
#include "clk_mgr_internal.h"

#include "dce100/dce_clk_mgr.h"
#include "dcn20_clk_mgr.h"
#include "reg_helper.h"
#include "core_types.h"
#include "dm_helpers.h"

#include "navi10_ip_offset.h"
#include "dcn/dcn_2_0_0_offset.h"
#include "dcn/dcn_2_0_0_sh_mask.h"
#include "clk/clk_11_0_0_offset.h"
#include "clk/clk_11_0_0_sh_mask.h"

#include "irq/dcn20/irq_service_dcn20.h"

#undef FN
#define FN(reg_name, field_name) \
	clk_mgr->clk_mgr_shift->field_name, clk_mgr->clk_mgr_mask->field_name

#define REG(reg) \
	(clk_mgr->regs->reg)

#define BASE_INNER(seg) DCN_BASE__INST0_SEG ## seg

#define BASE(seg) BASE_INNER(seg)

#define SR(reg_name)\
		.reg_name = BASE(mm ## reg_name ## _BASE_IDX) +  \
					mm ## reg_name

#define CLK_BASE_INNER(seg) \
	CLK_BASE__INST0_SEG ## seg


static const struct clk_mgr_registers clk_mgr_regs = {
	CLK_REG_LIST_NV10()
};

static const struct clk_mgr_shift clk_mgr_shift = {
	CLK_MASK_SH_LIST_NV10(__SHIFT)
};

static const struct clk_mgr_mask clk_mgr_mask = {
	CLK_MASK_SH_LIST_NV10(_MASK)
};

uint32_t dentist_get_did_from_divider(int divider)
{
	uint32_t divider_id;

	/* we want to floor here to get higher clock than required rather than lower */
	if (divider < DENTIST_DIVIDER_RANGE_2_START) {
		if (divider < DENTIST_DIVIDER_RANGE_1_START)
			divider_id = DENTIST_BASE_DID_1;
		else
			divider_id = DENTIST_BASE_DID_1
				+ (divider - DENTIST_DIVIDER_RANGE_1_START)
					/ DENTIST_DIVIDER_RANGE_1_STEP;
	} else if (divider < DENTIST_DIVIDER_RANGE_3_START) {
		divider_id = DENTIST_BASE_DID_2
				+ (divider - DENTIST_DIVIDER_RANGE_2_START)
					/ DENTIST_DIVIDER_RANGE_2_STEP;
	} else if (divider < DENTIST_DIVIDER_RANGE_4_START) {
		divider_id = DENTIST_BASE_DID_3
				+ (divider - DENTIST_DIVIDER_RANGE_3_START)
					/ DENTIST_DIVIDER_RANGE_3_STEP;
	} else {
		divider_id = DENTIST_BASE_DID_4
				+ (divider - DENTIST_DIVIDER_RANGE_4_START)
					/ DENTIST_DIVIDER_RANGE_4_STEP;
		if (divider_id > DENTIST_MAX_DID)
			divider_id = DENTIST_MAX_DID;
	}

	return divider_id;
}

void dcn20_update_clocks_update_dpp_dto(struct clk_mgr_internal *clk_mgr,
		struct dc_state *context, bool safe_to_lower)
{
	int i;

	clk_mgr->dccg->ref_dppclk = clk_mgr->base.clks.dppclk_khz;
	for (i = 0; i < clk_mgr->base.ctx->dc->res_pool->pipe_count; i++) {
		int dpp_inst, dppclk_khz, prev_dppclk_khz;

		/* Loop index will match dpp->inst if resource exists,
		 * and we want to avoid dependency on dpp object
		 */
		dpp_inst = i;
		dppclk_khz = context->res_ctx.pipe_ctx[i].plane_res.bw.dppclk_khz;

		prev_dppclk_khz = clk_mgr->dccg->pipe_dppclk_khz[i];

		if (safe_to_lower || prev_dppclk_khz < dppclk_khz)
			clk_mgr->dccg->funcs->update_dpp_dto(
							clk_mgr->dccg, dpp_inst, dppclk_khz);
	}
}

void dcn20_update_clocks_update_dentist(struct clk_mgr_internal *clk_mgr, struct dc_state *context)
{
	int dpp_divider = DENTIST_DIVIDER_RANGE_SCALE_FACTOR
			* clk_mgr->base.dentist_vco_freq_khz / clk_mgr->base.clks.dppclk_khz;
	int disp_divider = DENTIST_DIVIDER_RANGE_SCALE_FACTOR
			* clk_mgr->base.dentist_vco_freq_khz / clk_mgr->base.clks.dispclk_khz;

	uint32_t dppclk_wdivider = dentist_get_did_from_divider(dpp_divider);
	uint32_t dispclk_wdivider = dentist_get_did_from_divider(disp_divider);
	uint32_t current_dispclk_wdivider;
	uint32_t i;

	REG_GET(DENTIST_DISPCLK_CNTL,
			DENTIST_DISPCLK_WDIVIDER, &current_dispclk_wdivider);

	/* When changing divider to or from 127, some extra programming is required to prevent corruption */
	if (current_dispclk_wdivider == 127 && dispclk_wdivider != 127) {
		for (i = 0; i < clk_mgr->base.ctx->dc->res_pool->pipe_count; i++) {
			struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];
			uint32_t fifo_level;
			struct dccg *dccg = clk_mgr->base.ctx->dc->res_pool->dccg;
			struct stream_encoder *stream_enc = pipe_ctx->stream_res.stream_enc;
			int32_t N;
			int32_t j;

			if (!pipe_ctx->stream)
				continue;
			/* Virtual encoders don't have this function */
			if (!stream_enc->funcs->get_fifo_cal_average_level)
				continue;
			fifo_level = stream_enc->funcs->get_fifo_cal_average_level(
					stream_enc);
			N = fifo_level / 4;
			dccg->funcs->set_fifo_errdet_ovr_en(
					dccg,
					true);
			for (j = 0; j < N - 4; j++)
				dccg->funcs->otg_drop_pixel(
						dccg,
						pipe_ctx->stream_res.tg->inst);
			dccg->funcs->set_fifo_errdet_ovr_en(
					dccg,
					false);
		}
	} else if (dispclk_wdivider == 127 && current_dispclk_wdivider != 127) {
		REG_UPDATE(DENTIST_DISPCLK_CNTL,
				DENTIST_DISPCLK_WDIVIDER, 126);
		REG_WAIT(DENTIST_DISPCLK_CNTL, DENTIST_DISPCLK_CHG_DONE, 1, 50, 100);
		for (i = 0; i < clk_mgr->base.ctx->dc->res_pool->pipe_count; i++) {
			struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];
			struct dccg *dccg = clk_mgr->base.ctx->dc->res_pool->dccg;
			struct stream_encoder *stream_enc = pipe_ctx->stream_res.stream_enc;
			uint32_t fifo_level;
			int32_t N;
			int32_t j;

			if (!pipe_ctx->stream)
				continue;
			/* Virtual encoders don't have this function */
			if (!stream_enc->funcs->get_fifo_cal_average_level)
				continue;
			fifo_level = stream_enc->funcs->get_fifo_cal_average_level(
					stream_enc);
			N = fifo_level / 4;
			dccg->funcs->set_fifo_errdet_ovr_en(dccg, true);
			for (j = 0; j < 12 - N; j++)
				dccg->funcs->otg_add_pixel(dccg,
						pipe_ctx->stream_res.tg->inst);
			dccg->funcs->set_fifo_errdet_ovr_en(dccg, false);
		}
	}

	REG_UPDATE(DENTIST_DISPCLK_CNTL,
			DENTIST_DISPCLK_WDIVIDER, dispclk_wdivider);
	REG_WAIT(DENTIST_DISPCLK_CNTL, DENTIST_DISPCLK_CHG_DONE, 1, 50, 1000);
	REG_UPDATE(DENTIST_DISPCLK_CNTL,
			DENTIST_DPPCLK_WDIVIDER, dppclk_wdivider);
	REG_WAIT(DENTIST_DISPCLK_CNTL, DENTIST_DPPCLK_CHG_DONE, 1, 5, 100);
}


void dcn2_update_clocks(struct clk_mgr *clk_mgr_base,
			struct dc_state *context,
			bool safe_to_lower)
{
	struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base);
	struct dc_clocks *new_clocks = &context->bw_ctx.bw.dcn.clk;
	struct dc *dc = clk_mgr_base->ctx->dc;
	struct pp_smu_funcs_nv *pp_smu = NULL;
	int display_count;
	bool update_dppclk = false;
	bool update_dispclk = false;
	bool enter_display_off = false;
	bool dpp_clock_lowered = false;
	struct dmcu *dmcu = clk_mgr_base->ctx->dc->res_pool->dmcu;
	bool force_reset = false;
	bool p_state_change_support;
	int total_plane_count;
	int irq_src;
	uint32_t hpd_state;

	if (dc->work_arounds.skip_clock_update)
		return;

	if (clk_mgr_base->clks.dispclk_khz == 0 ||
		dc->debug.force_clock_mode & 0x1) {
		//this is from resume or boot up, if forced_clock cfg option used, we bypass program dispclk and DPPCLK, but need set them for S3.
		force_reset = true;

		dcn2_read_clocks_from_hw_dentist(clk_mgr_base);

		//force_clock_mode 0x1:  force reset the clock even it is the same clock as long as it is in Passive level.
	}
	display_count = clk_mgr_helper_get_active_display_cnt(dc, context);
	if (dc->res_pool->pp_smu)
		pp_smu = &dc->res_pool->pp_smu->nv_funcs;

	for (irq_src = DC_IRQ_SOURCE_HPD1; irq_src <= DC_IRQ_SOURCE_HPD6; irq_src++) {
		hpd_state = dc_get_hpd_state_dcn20(dc->res_pool->irqs, irq_src);
		if (hpd_state)
			break;
	}

	if (display_count == 0 && !hpd_state)
		enter_display_off = true;

	if (enter_display_off == safe_to_lower) {
		if (pp_smu && pp_smu->set_display_count)
			pp_smu->set_display_count(&pp_smu->pp_smu, display_count);
	}

	if (dc->debug.force_min_dcfclk_mhz > 0)
		new_clocks->dcfclk_khz = (new_clocks->dcfclk_khz > (dc->debug.force_min_dcfclk_mhz * 1000)) ?
				new_clocks->dcfclk_khz : (dc->debug.force_min_dcfclk_mhz * 1000);

	if (should_set_clock(safe_to_lower, new_clocks->dcfclk_khz, clk_mgr_base->clks.dcfclk_khz)) {
		clk_mgr_base->clks.dcfclk_khz = new_clocks->dcfclk_khz;
		if (pp_smu && pp_smu->set_hard_min_dcfclk_by_freq)
			pp_smu->set_hard_min_dcfclk_by_freq(&pp_smu->pp_smu, khz_to_mhz_ceil(clk_mgr_base->clks.dcfclk_khz));
	}

	if (should_set_clock(safe_to_lower,
			new_clocks->dcfclk_deep_sleep_khz, clk_mgr_base->clks.dcfclk_deep_sleep_khz)) {
		clk_mgr_base->clks.dcfclk_deep_sleep_khz = new_clocks->dcfclk_deep_sleep_khz;
		if (pp_smu && pp_smu->set_min_deep_sleep_dcfclk)
			pp_smu->set_min_deep_sleep_dcfclk(&pp_smu->pp_smu, khz_to_mhz_ceil(clk_mgr_base->clks.dcfclk_deep_sleep_khz));
	}

	if (should_set_clock(safe_to_lower, new_clocks->socclk_khz, clk_mgr_base->clks.socclk_khz)) {
		clk_mgr_base->clks.socclk_khz = new_clocks->socclk_khz;
		if (pp_smu && pp_smu->set_hard_min_socclk_by_freq)
			pp_smu->set_hard_min_socclk_by_freq(&pp_smu->pp_smu, khz_to_mhz_ceil(clk_mgr_base->clks.socclk_khz));
	}

	total_plane_count = clk_mgr_helper_get_active_plane_cnt(dc, context);
	p_state_change_support = new_clocks->p_state_change_support || (total_plane_count == 0);
	if (should_update_pstate_support(safe_to_lower, p_state_change_support, clk_mgr_base->clks.p_state_change_support)) {
		clk_mgr_base->clks.prev_p_state_change_support = clk_mgr_base->clks.p_state_change_support;
		clk_mgr_base->clks.p_state_change_support = p_state_change_support;
		if (pp_smu && pp_smu->set_pstate_handshake_support)
			pp_smu->set_pstate_handshake_support(&pp_smu->pp_smu, clk_mgr_base->clks.p_state_change_support);
	}

	if (should_set_clock(safe_to_lower, new_clocks->dramclk_khz, clk_mgr_base->clks.dramclk_khz)) {
		clk_mgr_base->clks.dramclk_khz = new_clocks->dramclk_khz;
		if (pp_smu && pp_smu->set_hard_min_uclk_by_freq)
			pp_smu->set_hard_min_uclk_by_freq(&pp_smu->pp_smu, khz_to_mhz_ceil(clk_mgr_base->clks.dramclk_khz));
	}

	if (should_set_clock(safe_to_lower, new_clocks->dppclk_khz, clk_mgr->base.clks.dppclk_khz)) {
		if (clk_mgr->base.clks.dppclk_khz > new_clocks->dppclk_khz)
			dpp_clock_lowered = true;
		clk_mgr->base.clks.dppclk_khz = new_clocks->dppclk_khz;

		update_dppclk = true;
	}

	if (should_set_clock(safe_to_lower, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz)) {
		clk_mgr_base->clks.dispclk_khz = new_clocks->dispclk_khz;

		update_dispclk = true;
	}

	if (update_dppclk || update_dispclk) {
		new_clocks->disp_dpp_voltage_level_khz = new_clocks->dppclk_khz;

		if (update_dispclk)
			new_clocks->disp_dpp_voltage_level_khz = new_clocks->dispclk_khz > new_clocks->dppclk_khz ? new_clocks->dispclk_khz : new_clocks->dppclk_khz;

		clk_mgr_base->clks.disp_dpp_voltage_level_khz = new_clocks->disp_dpp_voltage_level_khz;
		if (pp_smu && pp_smu->set_voltage_by_freq)
			pp_smu->set_voltage_by_freq(&pp_smu->pp_smu, PP_SMU_NV_DISPCLK, khz_to_mhz_ceil(clk_mgr_base->clks.disp_dpp_voltage_level_khz));
	}

	if (dc->config.forced_clocks == false || (force_reset && safe_to_lower)) {
		if (dpp_clock_lowered) {
			// if clock is being lowered, increase DTO before lowering refclk
			dcn20_update_clocks_update_dpp_dto(clk_mgr, context, safe_to_lower);
			dcn20_update_clocks_update_dentist(clk_mgr, context);
		} else {
			// if clock is being raised, increase refclk before lowering DTO
			if (update_dppclk || update_dispclk)
				dcn20_update_clocks_update_dentist(clk_mgr, context);
			// always update dtos unless clock is lowered and not safe to lower
			dcn20_update_clocks_update_dpp_dto(clk_mgr, context, safe_to_lower);
		}
	}

	if (update_dispclk &&
			dmcu && dmcu->funcs->is_dmcu_initialized(dmcu)) {
		/*update dmcu for wait_loop count*/
		dmcu->funcs->set_psr_wait_loop(dmcu,
			clk_mgr_base->clks.dispclk_khz / 1000 / 7);
	}
}

void dcn2_update_clocks_fpga(struct clk_mgr *clk_mgr,
		struct dc_state *context,
		bool safe_to_lower)
{
	struct clk_mgr_internal *clk_mgr_int = TO_CLK_MGR_INTERNAL(clk_mgr);

	struct dc_clocks *new_clocks = &context->bw_ctx.bw.dcn.clk;
	/* Min fclk = 1.2GHz since all the extra scemi logic seems to run off of it */
	int fclk_adj = new_clocks->fclk_khz > 1200000 ? new_clocks->fclk_khz : 1200000;

	if (should_set_clock(safe_to_lower, new_clocks->phyclk_khz, clk_mgr->clks.phyclk_khz)) {
		clk_mgr->clks.phyclk_khz = new_clocks->phyclk_khz;
	}

	if (should_set_clock(safe_to_lower, new_clocks->dcfclk_khz, clk_mgr->clks.dcfclk_khz)) {
		clk_mgr->clks.dcfclk_khz = new_clocks->dcfclk_khz;
	}

	if (should_set_clock(safe_to_lower,
			new_clocks->dcfclk_deep_sleep_khz, clk_mgr->clks.dcfclk_deep_sleep_khz)) {
		clk_mgr->clks.dcfclk_deep_sleep_khz = new_clocks->dcfclk_deep_sleep_khz;
	}

	if (should_set_clock(safe_to_lower, new_clocks->socclk_khz, clk_mgr->clks.socclk_khz)) {
		clk_mgr->clks.socclk_khz = new_clocks->socclk_khz;
	}

	if (should_set_clock(safe_to_lower, new_clocks->dramclk_khz, clk_mgr->clks.dramclk_khz)) {
		clk_mgr->clks.dramclk_khz = new_clocks->dramclk_khz;
	}

	if (should_set_clock(safe_to_lower, new_clocks->dppclk_khz, clk_mgr->clks.dppclk_khz)) {
		clk_mgr->clks.dppclk_khz = new_clocks->dppclk_khz;
	}

	if (should_set_clock(safe_to_lower, fclk_adj, clk_mgr->clks.fclk_khz)) {
		clk_mgr->clks.fclk_khz = fclk_adj;
	}

	if (should_set_clock(safe_to_lower, new_clocks->dispclk_khz, clk_mgr->clks.dispclk_khz)) {
		clk_mgr->clks.dispclk_khz = new_clocks->dispclk_khz;
	}

	/* Both fclk and ref_dppclk run on the same scemi clock.
	 * So take the higher value since the DPP DTO is typically programmed
	 * such that max dppclk is 1:1 with ref_dppclk.
	 */
	if (clk_mgr->clks.fclk_khz > clk_mgr->clks.dppclk_khz)
		clk_mgr->clks.dppclk_khz = clk_mgr->clks.fclk_khz;
	if (clk_mgr->clks.dppclk_khz > clk_mgr->clks.fclk_khz)
		clk_mgr->clks.fclk_khz = clk_mgr->clks.dppclk_khz;

	// Both fclk and ref_dppclk run on the same scemi clock.
	clk_mgr_int->dccg->ref_dppclk = clk_mgr->clks.fclk_khz;

	/* TODO: set dtbclk in correct place */
	clk_mgr->clks.dtbclk_en = false;
	dm_set_dcn_clocks(clk_mgr->ctx, &clk_mgr->clks);
}

void dcn2_init_clocks(struct clk_mgr *clk_mgr)
{
	memset(&(clk_mgr->clks), 0, sizeof(struct dc_clocks));
	// Assumption is that boot state always supports pstate
	clk_mgr->clks.p_state_change_support = true;
	clk_mgr->clks.prev_p_state_change_support = true;
}

void dcn2_enable_pme_wa(struct clk_mgr *clk_mgr_base)
{
	struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base);
	struct pp_smu_funcs_nv *pp_smu = NULL;

	if (clk_mgr->pp_smu) {
		pp_smu = &clk_mgr->pp_smu->nv_funcs;

		if (pp_smu->set_pme_wa_enable)
			pp_smu->set_pme_wa_enable(&pp_smu->pp_smu);
	}
}


void dcn2_read_clocks_from_hw_dentist(struct clk_mgr *clk_mgr_base)
{
	struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base);
	uint32_t dispclk_wdivider;
	uint32_t dppclk_wdivider;
	int disp_divider;
	int dpp_divider;

	REG_GET(DENTIST_DISPCLK_CNTL, DENTIST_DISPCLK_WDIVIDER, &dispclk_wdivider);
	REG_GET(DENTIST_DISPCLK_CNTL, DENTIST_DPPCLK_WDIVIDER, &dppclk_wdivider);

	disp_divider = dentist_get_divider_from_did(dispclk_wdivider);
	dpp_divider = dentist_get_divider_from_did(dppclk_wdivider);

	if (disp_divider && dpp_divider) {
		/* Calculate the current DFS clock, in kHz.*/
		clk_mgr_base->clks.dispclk_khz = (DENTIST_DIVIDER_RANGE_SCALE_FACTOR
			* clk_mgr->base.dentist_vco_freq_khz) / disp_divider;

		clk_mgr_base->clks.dppclk_khz = (DENTIST_DIVIDER_RANGE_SCALE_FACTOR
				* clk_mgr->base.dentist_vco_freq_khz) / dpp_divider;
	}

}

void dcn2_get_clock(struct clk_mgr *clk_mgr,
		struct dc_state *context,
			enum dc_clock_type clock_type,
			struct dc_clock_config *clock_cfg)
{

	if (clock_type == DC_CLOCK_TYPE_DISPCLK) {
		clock_cfg->max_clock_khz = context->bw_ctx.bw.dcn.clk.max_supported_dispclk_khz;
		clock_cfg->min_clock_khz = DCN_MINIMUM_DISPCLK_Khz;
		clock_cfg->current_clock_khz = clk_mgr->clks.dispclk_khz;
		clock_cfg->bw_requirequired_clock_khz = context->bw_ctx.bw.dcn.clk.bw_dispclk_khz;
	}
	if (clock_type == DC_CLOCK_TYPE_DPPCLK) {
		clock_cfg->max_clock_khz = context->bw_ctx.bw.dcn.clk.max_supported_dppclk_khz;
		clock_cfg->min_clock_khz = DCN_MINIMUM_DPPCLK_Khz;
		clock_cfg->current_clock_khz = clk_mgr->clks.dppclk_khz;
		clock_cfg->bw_requirequired_clock_khz = context->bw_ctx.bw.dcn.clk.bw_dppclk_khz;
	}
}

static bool dcn2_are_clock_states_equal(struct dc_clocks *a,
		struct dc_clocks *b)
{
	if (a->dispclk_khz != b->dispclk_khz)
		return false;
	else if (a->dppclk_khz != b->dppclk_khz)
		return false;
	else if (a->disp_dpp_voltage_level_khz != b->disp_dpp_voltage_level_khz)
		return false;
	else if (a->dcfclk_khz != b->dcfclk_khz)
		return false;
	else if (a->socclk_khz != b->socclk_khz)
		return false;
	else if (a->dcfclk_deep_sleep_khz != b->dcfclk_deep_sleep_khz)
		return false;
	else if (a->dramclk_khz != b->dramclk_khz)
		return false;
	else if (a->p_state_change_support != b->p_state_change_support)
		return false;

	return true;
}

/* Notify clk_mgr of a change in link rate, update phyclk frequency if necessary */
static void dcn2_notify_link_rate_change(struct clk_mgr *clk_mgr_base, struct dc_link *link)
{
	struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base);
	unsigned int i, max_phyclk_req = 0;
	struct pp_smu_funcs_nv *pp_smu = NULL;

	if (!clk_mgr->pp_smu || !clk_mgr->pp_smu->nv_funcs.set_voltage_by_freq)
		return;

	pp_smu = &clk_mgr->pp_smu->nv_funcs;

	clk_mgr->cur_phyclk_req_table[link->link_index] = link->cur_link_settings.link_rate * LINK_RATE_REF_FREQ_IN_KHZ;

	for (i = 0; i < MAX_PIPES * 2; i++) {
		if (clk_mgr->cur_phyclk_req_table[i] > max_phyclk_req)
			max_phyclk_req = clk_mgr->cur_phyclk_req_table[i];
	}

	if (max_phyclk_req != clk_mgr_base->clks.phyclk_khz) {
		clk_mgr_base->clks.phyclk_khz = max_phyclk_req;
		pp_smu->set_voltage_by_freq(&pp_smu->pp_smu, PP_SMU_NV_PHYCLK, khz_to_mhz_ceil(clk_mgr_base->clks.phyclk_khz));
	}
}

static struct clk_mgr_funcs dcn2_funcs = {
	.get_dp_ref_clk_frequency = dce12_get_dp_ref_freq_khz,
	.update_clocks = dcn2_update_clocks,
	.init_clocks = dcn2_init_clocks,
	.enable_pme_wa = dcn2_enable_pme_wa,
	.get_clock = dcn2_get_clock,
	.are_clock_states_equal = dcn2_are_clock_states_equal,
	.notify_link_rate_change = dcn2_notify_link_rate_change,
};


void dcn20_clk_mgr_construct(
		struct dc_context *ctx,
		struct clk_mgr_internal *clk_mgr,
		struct pp_smu_funcs *pp_smu,
		struct dccg *dccg)
{
	clk_mgr->base.ctx = ctx;
	clk_mgr->pp_smu = pp_smu;
	clk_mgr->base.funcs = &dcn2_funcs;
	clk_mgr->regs = &clk_mgr_regs;
	clk_mgr->clk_mgr_shift = &clk_mgr_shift;
	clk_mgr->clk_mgr_mask = &clk_mgr_mask;

	clk_mgr->dccg = dccg;
	clk_mgr->dfs_bypass_disp_clk = 0;

	clk_mgr->dprefclk_ss_percentage = 0;
	clk_mgr->dprefclk_ss_divider = 1000;
	clk_mgr->ss_on_dprefclk = false;

	clk_mgr->base.dprefclk_khz = 700000; // 700 MHz planned if VCO is 3.85 GHz, will be retrieved

	if (IS_FPGA_MAXIMUS_DC(ctx->dce_environment)) {
		dcn2_funcs.update_clocks = dcn2_update_clocks_fpga;
		clk_mgr->base.dentist_vco_freq_khz = 3850000;

	} else {
		/* DFS Slice 2 should be used for DPREFCLK */
		int dprefclk_did = REG_READ(CLK3_CLK2_DFS_CNTL);
		/* Convert DPREFCLK DFS Slice DID to actual divider*/
		int target_div = dentist_get_divider_from_did(dprefclk_did);

		/* get FbMult value */
		uint32_t pll_req_reg = REG_READ(CLK3_CLK_PLL_REQ);
		struct fixed31_32 pll_req;

		/* set up a fixed-point number
		 * this works because the int part is on the right edge of the register
		 * and the frac part is on the left edge
		 */

		pll_req = dc_fixpt_from_int(pll_req_reg & clk_mgr->clk_mgr_mask->FbMult_int);
		pll_req.value |= pll_req_reg & clk_mgr->clk_mgr_mask->FbMult_frac;

		/* multiply by REFCLK period */
		pll_req = dc_fixpt_mul_int(pll_req, 100000);

		/* integer part is now VCO frequency in kHz */
		clk_mgr->base.dentist_vco_freq_khz = dc_fixpt_floor(pll_req);

		/* in case we don't get a value from the register, use default */
		if (clk_mgr->base.dentist_vco_freq_khz == 0)
			clk_mgr->base.dentist_vco_freq_khz = 3850000;

		/* Calculate the DPREFCLK in kHz.*/
		clk_mgr->base.dprefclk_khz = (DENTIST_DIVIDER_RANGE_SCALE_FACTOR
			* clk_mgr->base.dentist_vco_freq_khz) / target_div;
	}
	//Integrated_info table does not exist on dGPU projects so should not be referenced
	//anywhere in code for dGPUs.
	//Also there is no plan for now that DFS BYPASS will be used on NV10/12/14.
	clk_mgr->dfs_bypass_enabled = false;

	dce_clock_read_ss_info(clk_mgr);
}