blob: 71101d1ec825e9d4ba63f4aaae168209d8b724fa [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* linux/include/linux/mmc/core.h
*/
#ifndef LINUX_MMC_CORE_H
#define LINUX_MMC_CORE_H
#include <linux/completion.h>
#include <linux/types.h>
struct mmc_data;
struct mmc_request;
enum mmc_blk_status {
MMC_BLK_SUCCESS = 0,
MMC_BLK_PARTIAL,
MMC_BLK_CMD_ERR,
MMC_BLK_RETRY,
MMC_BLK_ABORT,
MMC_BLK_DATA_ERR,
MMC_BLK_ECC_ERR,
MMC_BLK_NOMEDIUM,
MMC_BLK_NEW_REQUEST,
};
struct mmc_command {
u32 opcode;
u32 arg;
#define MMC_CMD23_ARG_REL_WR (1 << 31)
#define MMC_CMD23_ARG_PACKED ((0 << 31) | (1 << 30))
#define MMC_CMD23_ARG_TAG_REQ (1 << 29)
u32 resp[4];
unsigned int flags; /* expected response type */
#define MMC_RSP_PRESENT (1 << 0)
#define MMC_RSP_136 (1 << 1) /* 136 bit response */
#define MMC_RSP_CRC (1 << 2) /* expect valid crc */
#define MMC_RSP_BUSY (1 << 3) /* card may send busy */
#define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */
#define MMC_CMD_MASK (3 << 5) /* non-SPI command type */
#define MMC_CMD_AC (0 << 5)
#define MMC_CMD_ADTC (1 << 5)
#define MMC_CMD_BC (2 << 5)
#define MMC_CMD_BCR (3 << 5)
#define MMC_RSP_SPI_S1 (1 << 7) /* one status byte */
#define MMC_RSP_SPI_S2 (1 << 8) /* second byte */
#define MMC_RSP_SPI_B4 (1 << 9) /* four data bytes */
#define MMC_RSP_SPI_BUSY (1 << 10) /* card may send busy */
/*
* These are the native response types, and correspond to valid bit
* patterns of the above flags. One additional valid pattern
* is all zeros, which means we don't expect a response.
*/
#define MMC_RSP_NONE (0)
#define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMC_RSP_R1B (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
#define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
#define MMC_RSP_R3 (MMC_RSP_PRESENT)
#define MMC_RSP_R4 (MMC_RSP_PRESENT)
#define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
/* Can be used by core to poll after switch to MMC HS mode */
#define MMC_RSP_R1_NO_CRC (MMC_RSP_PRESENT|MMC_RSP_OPCODE)
#define mmc_resp_type(cmd) ((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE))
/*
* These are the SPI response types for MMC, SD, and SDIO cards.
* Commands return R1, with maybe more info. Zero is an error type;
* callers must always provide the appropriate MMC_RSP_SPI_Rx flags.
*/
#define MMC_RSP_SPI_R1 (MMC_RSP_SPI_S1)
#define MMC_RSP_SPI_R1B (MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY)
#define MMC_RSP_SPI_R2 (MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
#define MMC_RSP_SPI_R3 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
#define MMC_RSP_SPI_R4 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
#define MMC_RSP_SPI_R5 (MMC_RSP_SPI_S1|MMC_RSP_SPI_S2)
#define MMC_RSP_SPI_R7 (MMC_RSP_SPI_S1|MMC_RSP_SPI_B4)
#define mmc_spi_resp_type(cmd) ((cmd)->flags & \
(MMC_RSP_SPI_S1|MMC_RSP_SPI_BUSY|MMC_RSP_SPI_S2|MMC_RSP_SPI_B4))
/*
* These are the command types.
*/
#define mmc_cmd_type(cmd) ((cmd)->flags & MMC_CMD_MASK)
unsigned int retries; /* max number of retries */
int error; /* command error */
/*
* Standard errno values are used for errors, but some have specific
* meaning in the MMC layer:
*
* ETIMEDOUT Card took too long to respond
* EILSEQ Basic format problem with the received or sent data
* (e.g. CRC check failed, incorrect opcode in response
* or bad end bit)
* EINVAL Request cannot be performed because of restrictions
* in hardware and/or the driver
* ENOMEDIUM Host can determine that the slot is empty and is
* actively failing requests
*/
unsigned int busy_timeout; /* busy detect timeout in ms */
struct mmc_data *data; /* data segment associated with cmd */
struct mmc_request *mrq; /* associated request */
};
struct mmc_data {
unsigned int timeout_ns; /* data timeout (in ns, max 80ms) */
unsigned int timeout_clks; /* data timeout (in clocks) */
unsigned int blksz; /* data block size */
unsigned int blocks; /* number of blocks */
unsigned int blk_addr; /* block address */
int error; /* data error */
unsigned int flags;
#define MMC_DATA_WRITE BIT(8)
#define MMC_DATA_READ BIT(9)
/* Extra flags used by CQE */
#define MMC_DATA_QBR BIT(10) /* CQE queue barrier*/
#define MMC_DATA_PRIO BIT(11) /* CQE high priority */
#define MMC_DATA_REL_WR BIT(12) /* Reliable write */
#define MMC_DATA_DAT_TAG BIT(13) /* Tag request */
#define MMC_DATA_FORCED_PRG BIT(14) /* Forced programming */
unsigned int bytes_xfered;
struct mmc_command *stop; /* stop command */
struct mmc_request *mrq; /* associated request */
unsigned int sg_len; /* size of scatter list */
int sg_count; /* mapped sg entries */
struct scatterlist *sg; /* I/O scatter list */
s32 host_cookie; /* host private data */
};
struct mmc_host;
struct mmc_request {
struct mmc_command *sbc; /* SET_BLOCK_COUNT for multiblock */
struct mmc_command *cmd;
struct mmc_data *data;
struct mmc_command *stop;
struct completion completion;
struct completion cmd_completion;
void (*done)(struct mmc_request *);/* completion function */
/*
* Notify uppers layers (e.g. mmc block driver) that recovery is needed
* due to an error associated with the mmc_request. Currently used only
* by CQE.
*/
void (*recovery_notifier)(struct mmc_request *);
struct mmc_host *host;
/* Allow other commands during this ongoing data transfer or busy wait */
bool cap_cmd_during_tfr;
int tag;
#ifdef CONFIG_MMC_CRYPTO
const struct bio_crypt_ctx *crypto_ctx;
int crypto_key_slot;
#endif
};
struct mmc_card;
void mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq);
int mmc_wait_for_cmd(struct mmc_host *host, struct mmc_command *cmd,
int retries);
int mmc_hw_reset(struct mmc_host *host);
int mmc_sw_reset(struct mmc_host *host);
void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card);
#endif /* LINUX_MMC_CORE_H */