| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* |
| * OMAP Smartreflex Defines and Routines |
| * |
| * Author: Thara Gopinath <thara@ti.com> |
| * |
| * Copyright (C) 2010 Texas Instruments, Inc. |
| * Thara Gopinath <thara@ti.com> |
| * |
| * Copyright (C) 2008 Nokia Corporation |
| * Kalle Jokiniemi |
| * |
| * Copyright (C) 2007 Texas Instruments, Inc. |
| * Lesly A M <x0080970@ti.com> |
| */ |
| |
| #ifndef __POWER_SMARTREFLEX_H |
| #define __POWER_SMARTREFLEX_H |
| |
| #include <linux/types.h> |
| #include <linux/platform_device.h> |
| #include <linux/delay.h> |
| #include <linux/platform_data/voltage-omap.h> |
| |
| /* |
| * Different Smartreflex IPs version. The v1 is the 65nm version used in |
| * OMAP3430. The v2 is the update for the 45nm version of the IP |
| * used in OMAP3630 and OMAP4430 |
| */ |
| #define SR_TYPE_V1 1 |
| #define SR_TYPE_V2 2 |
| |
| /* SMART REFLEX REG ADDRESS OFFSET */ |
| #define SRCONFIG 0x00 |
| #define SRSTATUS 0x04 |
| #define SENVAL 0x08 |
| #define SENMIN 0x0C |
| #define SENMAX 0x10 |
| #define SENAVG 0x14 |
| #define AVGWEIGHT 0x18 |
| #define NVALUERECIPROCAL 0x1c |
| #define SENERROR_V1 0x20 |
| #define ERRCONFIG_V1 0x24 |
| #define IRQ_EOI 0x20 |
| #define IRQSTATUS_RAW 0x24 |
| #define IRQSTATUS 0x28 |
| #define IRQENABLE_SET 0x2C |
| #define IRQENABLE_CLR 0x30 |
| #define SENERROR_V2 0x34 |
| #define ERRCONFIG_V2 0x38 |
| |
| /* Bit/Shift Positions */ |
| |
| /* SRCONFIG */ |
| #define SRCONFIG_ACCUMDATA_SHIFT 22 |
| #define SRCONFIG_SRCLKLENGTH_SHIFT 12 |
| #define SRCONFIG_SENNENABLE_V1_SHIFT 5 |
| #define SRCONFIG_SENPENABLE_V1_SHIFT 3 |
| #define SRCONFIG_SENNENABLE_V2_SHIFT 1 |
| #define SRCONFIG_SENPENABLE_V2_SHIFT 0 |
| #define SRCONFIG_CLKCTRL_SHIFT 0 |
| |
| #define SRCONFIG_ACCUMDATA_MASK (0x3ff << 22) |
| |
| #define SRCONFIG_SRENABLE BIT(11) |
| #define SRCONFIG_SENENABLE BIT(10) |
| #define SRCONFIG_ERRGEN_EN BIT(9) |
| #define SRCONFIG_MINMAXAVG_EN BIT(8) |
| #define SRCONFIG_DELAYCTRL BIT(2) |
| |
| /* AVGWEIGHT */ |
| #define AVGWEIGHT_SENPAVGWEIGHT_SHIFT 2 |
| #define AVGWEIGHT_SENNAVGWEIGHT_SHIFT 0 |
| |
| /* NVALUERECIPROCAL */ |
| #define NVALUERECIPROCAL_SENPGAIN_SHIFT 20 |
| #define NVALUERECIPROCAL_SENNGAIN_SHIFT 16 |
| #define NVALUERECIPROCAL_RNSENP_SHIFT 8 |
| #define NVALUERECIPROCAL_RNSENN_SHIFT 0 |
| |
| /* ERRCONFIG */ |
| #define ERRCONFIG_ERRWEIGHT_SHIFT 16 |
| #define ERRCONFIG_ERRMAXLIMIT_SHIFT 8 |
| #define ERRCONFIG_ERRMINLIMIT_SHIFT 0 |
| |
| #define SR_ERRWEIGHT_MASK (0x07 << 16) |
| #define SR_ERRMAXLIMIT_MASK (0xff << 8) |
| #define SR_ERRMINLIMIT_MASK (0xff << 0) |
| |
| #define ERRCONFIG_VPBOUNDINTEN_V1 BIT(31) |
| #define ERRCONFIG_VPBOUNDINTST_V1 BIT(30) |
| #define ERRCONFIG_MCUACCUMINTEN BIT(29) |
| #define ERRCONFIG_MCUACCUMINTST BIT(28) |
| #define ERRCONFIG_MCUVALIDINTEN BIT(27) |
| #define ERRCONFIG_MCUVALIDINTST BIT(26) |
| #define ERRCONFIG_MCUBOUNDINTEN BIT(25) |
| #define ERRCONFIG_MCUBOUNDINTST BIT(24) |
| #define ERRCONFIG_MCUDISACKINTEN BIT(23) |
| #define ERRCONFIG_VPBOUNDINTST_V2 BIT(23) |
| #define ERRCONFIG_MCUDISACKINTST BIT(22) |
| #define ERRCONFIG_VPBOUNDINTEN_V2 BIT(22) |
| |
| #define ERRCONFIG_STATUS_V1_MASK (ERRCONFIG_VPBOUNDINTST_V1 | \ |
| ERRCONFIG_MCUACCUMINTST | \ |
| ERRCONFIG_MCUVALIDINTST | \ |
| ERRCONFIG_MCUBOUNDINTST | \ |
| ERRCONFIG_MCUDISACKINTST) |
| /* IRQSTATUS */ |
| #define IRQSTATUS_MCUACCUMINT BIT(3) |
| #define IRQSTATUS_MCVALIDINT BIT(2) |
| #define IRQSTATUS_MCBOUNDSINT BIT(1) |
| #define IRQSTATUS_MCUDISABLEACKINT BIT(0) |
| |
| /* IRQENABLE_SET and IRQENABLE_CLEAR */ |
| #define IRQENABLE_MCUACCUMINT BIT(3) |
| #define IRQENABLE_MCUVALIDINT BIT(2) |
| #define IRQENABLE_MCUBOUNDSINT BIT(1) |
| #define IRQENABLE_MCUDISABLEACKINT BIT(0) |
| |
| /* Common Bit values */ |
| |
| #define SRCLKLENGTH_12MHZ_SYSCLK 0x3c |
| #define SRCLKLENGTH_13MHZ_SYSCLK 0x41 |
| #define SRCLKLENGTH_19MHZ_SYSCLK 0x60 |
| #define SRCLKLENGTH_26MHZ_SYSCLK 0x82 |
| #define SRCLKLENGTH_38MHZ_SYSCLK 0xC0 |
| |
| /* |
| * 3430 specific values. Maybe these should be passed from board file or |
| * pmic structures. |
| */ |
| #define OMAP3430_SR_ACCUMDATA 0x1f4 |
| |
| #define OMAP3430_SR1_SENPAVGWEIGHT 0x03 |
| #define OMAP3430_SR1_SENNAVGWEIGHT 0x03 |
| |
| #define OMAP3430_SR2_SENPAVGWEIGHT 0x01 |
| #define OMAP3430_SR2_SENNAVGWEIGHT 0x01 |
| |
| #define OMAP3430_SR_ERRWEIGHT 0x04 |
| #define OMAP3430_SR_ERRMAXLIMIT 0x02 |
| |
| enum sr_instance { |
| OMAP_SR_MPU, /* shared with iva on omap3 */ |
| OMAP_SR_CORE, |
| OMAP_SR_IVA, |
| OMAP_SR_NR, |
| }; |
| |
| struct omap_sr { |
| char *name; |
| struct list_head node; |
| struct platform_device *pdev; |
| struct omap_sr_nvalue_table *nvalue_table; |
| struct voltagedomain *voltdm; |
| struct dentry *dbg_dir; |
| unsigned int irq; |
| struct clk *fck; |
| int srid; |
| int ip_type; |
| int nvalue_count; |
| bool autocomp_active; |
| u32 clk_length; |
| u32 err_weight; |
| u32 err_minlimit; |
| u32 err_maxlimit; |
| u32 accum_data; |
| u32 senn_avgweight; |
| u32 senp_avgweight; |
| u32 senp_mod; |
| u32 senn_mod; |
| void __iomem *base; |
| unsigned long enabled:1; |
| }; |
| |
| /** |
| * test_cond_timeout - busy-loop, testing a condition |
| * @cond: condition to test until it evaluates to true |
| * @timeout: maximum number of microseconds in the timeout |
| * @index: loop index (integer) |
| * |
| * Loop waiting for @cond to become true or until at least @timeout |
| * microseconds have passed. To use, define some integer @index in the |
| * calling code. After running, if @index == @timeout, then the loop has |
| * timed out. |
| * |
| * Copied from omap_test_timeout */ |
| #define sr_test_cond_timeout(cond, timeout, index) \ |
| ({ \ |
| for (index = 0; index < timeout; index++) { \ |
| if (cond) \ |
| break; \ |
| udelay(1); \ |
| } \ |
| }) |
| |
| /** |
| * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass |
| * pmic specific info to smartreflex driver |
| * |
| * @sr_pmic_init: API to initialize smartreflex on the PMIC side. |
| */ |
| struct omap_sr_pmic_data { |
| void (*sr_pmic_init) (void); |
| }; |
| |
| /** |
| * struct omap_smartreflex_dev_attr - Smartreflex Device attribute. |
| * |
| * @sensor_voltdm_name: Name of voltdomain of SR instance |
| */ |
| struct omap_smartreflex_dev_attr { |
| const char *sensor_voltdm_name; |
| }; |
| |
| /* |
| * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR. |
| * The smartreflex class driver should pass the class type. |
| * Should be used to populate the class_type field of the |
| * omap_smartreflex_class_data structure. |
| */ |
| #define SR_CLASS1 0x1 |
| #define SR_CLASS2 0x2 |
| #define SR_CLASS3 0x3 |
| |
| /** |
| * struct omap_sr_class_data - Smartreflex class driver info |
| * |
| * @enable: API to enable a particular class smaartreflex. |
| * @disable: API to disable a particular class smartreflex. |
| * @configure: API to configure a particular class smartreflex. |
| * @notify: API to notify the class driver about an event in SR. |
| * Not needed for class3. |
| * @notify_flags: specify the events to be notified to the class driver |
| * @class_type: specify which smartreflex class. |
| * Can be used by the SR driver to take any class |
| * based decisions. |
| */ |
| struct omap_sr_class_data { |
| int (*enable)(struct omap_sr *sr); |
| int (*disable)(struct omap_sr *sr, int is_volt_reset); |
| int (*configure)(struct omap_sr *sr); |
| int (*notify)(struct omap_sr *sr, u32 status); |
| u8 notify_flags; |
| u8 class_type; |
| }; |
| |
| /** |
| * struct omap_sr_nvalue_table - Smartreflex n-target value info |
| * |
| * @efuse_offs: The offset of the efuse where n-target values are stored. |
| * @nvalue: The n-target value. |
| * @errminlimit: The value of the ERRMINLIMIT bitfield for this n-target |
| * @volt_nominal: microvolts DC that the VDD is initially programmed to |
| */ |
| struct omap_sr_nvalue_table { |
| u32 efuse_offs; |
| u32 nvalue; |
| u32 errminlimit; |
| unsigned long volt_nominal; |
| }; |
| |
| /** |
| * struct omap_sr_data - Smartreflex platform data. |
| * |
| * @name: instance name |
| * @ip_type: Smartreflex IP type. |
| * @senp_mod: SENPENABLE value of the sr CONFIG register |
| * @senn_mod: SENNENABLE value for sr CONFIG register |
| * @err_weight ERRWEIGHT value of the sr ERRCONFIG register |
| * @err_maxlimit ERRMAXLIMIT value of the sr ERRCONFIG register |
| * @accum_data ACCUMDATA value of the sr CONFIG register |
| * @senn_avgweight SENNAVGWEIGHT value of the sr AVGWEIGHT register |
| * @senp_avgweight SENPAVGWEIGHT value of the sr AVGWEIGHT register |
| * @nvalue_count: Number of distinct nvalues in the nvalue table |
| * @enable_on_init: whether this sr module needs to enabled at |
| * boot up or not. |
| * @nvalue_table: table containing the efuse offsets and nvalues |
| * corresponding to them. |
| * @voltdm: Pointer to the voltage domain associated with the SR |
| */ |
| struct omap_sr_data { |
| const char *name; |
| int ip_type; |
| u32 senp_mod; |
| u32 senn_mod; |
| u32 err_weight; |
| u32 err_maxlimit; |
| u32 accum_data; |
| u32 senn_avgweight; |
| u32 senp_avgweight; |
| int nvalue_count; |
| bool enable_on_init; |
| struct omap_sr_nvalue_table *nvalue_table; |
| struct voltagedomain *voltdm; |
| }; |
| |
| |
| extern struct omap_sr_data omap_sr_pdata[OMAP_SR_NR]; |
| |
| #ifdef CONFIG_POWER_AVS_OMAP |
| |
| /* Smartreflex module enable/disable interface */ |
| void omap_sr_enable(struct voltagedomain *voltdm); |
| void omap_sr_disable(struct voltagedomain *voltdm); |
| void omap_sr_disable_reset_volt(struct voltagedomain *voltdm); |
| |
| /* Smartreflex driver hooks to be called from Smartreflex class driver */ |
| int sr_enable(struct omap_sr *sr, unsigned long volt); |
| void sr_disable(struct omap_sr *sr); |
| int sr_configure_errgen(struct omap_sr *sr); |
| int sr_disable_errgen(struct omap_sr *sr); |
| int sr_configure_minmax(struct omap_sr *sr); |
| |
| /* API to register the smartreflex class driver with the smartreflex driver */ |
| int sr_register_class(struct omap_sr_class_data *class_data); |
| #else |
| static inline void omap_sr_enable(struct voltagedomain *voltdm) {} |
| static inline void omap_sr_disable(struct voltagedomain *voltdm) {} |
| static inline void omap_sr_disable_reset_volt( |
| struct voltagedomain *voltdm) {} |
| #endif |
| #endif |