blob: 5e0beb5c5659a220081b884b787b8c889a2b9f80 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Read-Copy Update mechanism for mutual exclusion
*
* Copyright IBM Corporation, 2001
*
* Author: Dipankar Sarma <dipankar@in.ibm.com>
*
* Based on the original work by Paul McKenney <paulmck@vnet.ibm.com>
* and inputs from Rusty Russell, Andrea Arcangeli and Andi Kleen.
* Papers:
* http://www.rdrop.com/users/paulmck/paper/rclockpdcsproof.pdf
* http://lse.sourceforge.net/locking/rclock_OLS.2001.05.01c.sc.pdf (OLS2001)
*
* For detailed explanation of Read-Copy Update mechanism see -
* http://lse.sourceforge.net/locking/rcupdate.html
*
*/
#ifndef __LINUX_RCUPDATE_H
#define __LINUX_RCUPDATE_H
#include <linux/types.h>
#include <linux/compiler.h>
#include <linux/atomic.h>
#include <linux/irqflags.h>
#include <linux/preempt.h>
#include <linux/bottom_half.h>
#include <linux/lockdep.h>
#include <asm/processor.h>
#include <linux/cpumask.h>
#define ULONG_CMP_GE(a, b) (ULONG_MAX / 2 >= (a) - (b))
#define ULONG_CMP_LT(a, b) (ULONG_MAX / 2 < (a) - (b))
#define ulong2long(a) (*(long *)(&(a)))
#define USHORT_CMP_GE(a, b) (USHRT_MAX / 2 >= (unsigned short)((a) - (b)))
#define USHORT_CMP_LT(a, b) (USHRT_MAX / 2 < (unsigned short)((a) - (b)))
/* Exported common interfaces */
void call_rcu(struct rcu_head *head, rcu_callback_t func);
void rcu_barrier_tasks(void);
void rcu_barrier_tasks_rude(void);
void synchronize_rcu(void);
#ifdef CONFIG_PREEMPT_RCU
void __rcu_read_lock(void);
void __rcu_read_unlock(void);
/*
* Defined as a macro as it is a very low level header included from
* areas that don't even know about current. This gives the rcu_read_lock()
* nesting depth, but makes sense only if CONFIG_PREEMPT_RCU -- in other
* types of kernel builds, the rcu_read_lock() nesting depth is unknowable.
*/
#define rcu_preempt_depth() READ_ONCE(current->rcu_read_lock_nesting)
#else /* #ifdef CONFIG_PREEMPT_RCU */
#ifdef CONFIG_TINY_RCU
#define rcu_read_unlock_strict() do { } while (0)
#else
void rcu_read_unlock_strict(void);
#endif
static inline void __rcu_read_lock(void)
{
preempt_disable();
}
static inline void __rcu_read_unlock(void)
{
preempt_enable();
if (IS_ENABLED(CONFIG_RCU_STRICT_GRACE_PERIOD))
rcu_read_unlock_strict();
}
static inline int rcu_preempt_depth(void)
{
return 0;
}
#endif /* #else #ifdef CONFIG_PREEMPT_RCU */
/* Internal to kernel */
void rcu_init(void);
extern int rcu_scheduler_active __read_mostly;
void rcu_sched_clock_irq(int user);
void rcu_report_dead(unsigned int cpu);
void rcutree_migrate_callbacks(int cpu);
#ifdef CONFIG_TASKS_RCU_GENERIC
void rcu_init_tasks_generic(void);
#else
static inline void rcu_init_tasks_generic(void) { }
#endif
#ifdef CONFIG_RCU_STALL_COMMON
void rcu_sysrq_start(void);
void rcu_sysrq_end(void);
#else /* #ifdef CONFIG_RCU_STALL_COMMON */
static inline void rcu_sysrq_start(void) { }
static inline void rcu_sysrq_end(void) { }
#endif /* #else #ifdef CONFIG_RCU_STALL_COMMON */
#ifdef CONFIG_NO_HZ_FULL
void rcu_user_enter(void);
void rcu_user_exit(void);
#else
static inline void rcu_user_enter(void) { }
static inline void rcu_user_exit(void) { }
#endif /* CONFIG_NO_HZ_FULL */
#ifdef CONFIG_RCU_NOCB_CPU
void rcu_init_nohz(void);
int rcu_nocb_cpu_offload(int cpu);
int rcu_nocb_cpu_deoffload(int cpu);
void rcu_nocb_flush_deferred_wakeup(void);
#else /* #ifdef CONFIG_RCU_NOCB_CPU */
static inline void rcu_init_nohz(void) { }
static inline int rcu_nocb_cpu_offload(int cpu) { return -EINVAL; }
static inline int rcu_nocb_cpu_deoffload(int cpu) { return 0; }
static inline void rcu_nocb_flush_deferred_wakeup(void) { }
#endif /* #else #ifdef CONFIG_RCU_NOCB_CPU */
/**
* RCU_NONIDLE - Indicate idle-loop code that needs RCU readers
* @a: Code that RCU needs to pay attention to.
*
* RCU read-side critical sections are forbidden in the inner idle loop,
* that is, between the rcu_idle_enter() and the rcu_idle_exit() -- RCU
* will happily ignore any such read-side critical sections. However,
* things like powertop need tracepoints in the inner idle loop.
*
* This macro provides the way out: RCU_NONIDLE(do_something_with_RCU())
* will tell RCU that it needs to pay attention, invoke its argument
* (in this example, calling the do_something_with_RCU() function),
* and then tell RCU to go back to ignoring this CPU. It is permissible
* to nest RCU_NONIDLE() wrappers, but not indefinitely (but the limit is
* on the order of a million or so, even on 32-bit systems). It is
* not legal to block within RCU_NONIDLE(), nor is it permissible to
* transfer control either into or out of RCU_NONIDLE()'s statement.
*/
#define RCU_NONIDLE(a) \
do { \
rcu_irq_enter_irqson(); \
do { a; } while (0); \
rcu_irq_exit_irqson(); \
} while (0)
/*
* Note a quasi-voluntary context switch for RCU-tasks's benefit.
* This is a macro rather than an inline function to avoid #include hell.
*/
#ifdef CONFIG_TASKS_RCU_GENERIC
# ifdef CONFIG_TASKS_RCU
# define rcu_tasks_classic_qs(t, preempt) \
do { \
if (!(preempt) && READ_ONCE((t)->rcu_tasks_holdout)) \
WRITE_ONCE((t)->rcu_tasks_holdout, false); \
} while (0)
void call_rcu_tasks(struct rcu_head *head, rcu_callback_t func);
void synchronize_rcu_tasks(void);
# else
# define rcu_tasks_classic_qs(t, preempt) do { } while (0)
# define call_rcu_tasks call_rcu
# define synchronize_rcu_tasks synchronize_rcu
# endif
# ifdef CONFIG_TASKS_TRACE_RCU
# define rcu_tasks_trace_qs(t) \
do { \
if (!likely(READ_ONCE((t)->trc_reader_checked)) && \
!unlikely(READ_ONCE((t)->trc_reader_nesting))) { \
smp_store_release(&(t)->trc_reader_checked, true); \
smp_mb(); /* Readers partitioned by store. */ \
} \
} while (0)
# else
# define rcu_tasks_trace_qs(t) do { } while (0)
# endif
#define rcu_tasks_qs(t, preempt) \
do { \
rcu_tasks_classic_qs((t), (preempt)); \
rcu_tasks_trace_qs((t)); \
} while (0)
# ifdef CONFIG_TASKS_RUDE_RCU
void call_rcu_tasks_rude(struct rcu_head *head, rcu_callback_t func);
void synchronize_rcu_tasks_rude(void);
# endif
#define rcu_note_voluntary_context_switch(t) rcu_tasks_qs(t, false)
void exit_tasks_rcu_start(void);
void exit_tasks_rcu_finish(void);
#else /* #ifdef CONFIG_TASKS_RCU_GENERIC */
#define rcu_tasks_qs(t, preempt) do { } while (0)
#define rcu_note_voluntary_context_switch(t) do { } while (0)
#define call_rcu_tasks call_rcu
#define synchronize_rcu_tasks synchronize_rcu
static inline void exit_tasks_rcu_start(void) { }
static inline void exit_tasks_rcu_finish(void) { }
#endif /* #else #ifdef CONFIG_TASKS_RCU_GENERIC */
/**
* cond_resched_tasks_rcu_qs - Report potential quiescent states to RCU
*
* This macro resembles cond_resched(), except that it is defined to
* report potential quiescent states to RCU-tasks even if the cond_resched()
* machinery were to be shut off, as some advocate for PREEMPTION kernels.
*/
#define cond_resched_tasks_rcu_qs() \
do { \
rcu_tasks_qs(current, false); \
cond_resched(); \
} while (0)
/*
* Infrastructure to implement the synchronize_() primitives in
* TREE_RCU and rcu_barrier_() primitives in TINY_RCU.
*/
#if defined(CONFIG_TREE_RCU)
#include <linux/rcutree.h>
#elif defined(CONFIG_TINY_RCU)
#include <linux/rcutiny.h>
#else
#error "Unknown RCU implementation specified to kernel configuration"
#endif
/*
* The init_rcu_head_on_stack() and destroy_rcu_head_on_stack() calls
* are needed for dynamic initialization and destruction of rcu_head
* on the stack, and init_rcu_head()/destroy_rcu_head() are needed for
* dynamic initialization and destruction of statically allocated rcu_head
* structures. However, rcu_head structures allocated dynamically in the
* heap don't need any initialization.
*/
#ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD
void init_rcu_head(struct rcu_head *head);
void destroy_rcu_head(struct rcu_head *head);
void init_rcu_head_on_stack(struct rcu_head *head);
void destroy_rcu_head_on_stack(struct rcu_head *head);
#else /* !CONFIG_DEBUG_OBJECTS_RCU_HEAD */
static inline void init_rcu_head(struct rcu_head *head) { }
static inline void destroy_rcu_head(struct rcu_head *head) { }
static inline void init_rcu_head_on_stack(struct rcu_head *head) { }
static inline void destroy_rcu_head_on_stack(struct rcu_head *head) { }
#endif /* #else !CONFIG_DEBUG_OBJECTS_RCU_HEAD */
#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PROVE_RCU)
bool rcu_lockdep_current_cpu_online(void);
#else /* #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PROVE_RCU) */
static inline bool rcu_lockdep_current_cpu_online(void) { return true; }
#endif /* #else #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PROVE_RCU) */
extern struct lockdep_map rcu_lock_map;
extern struct lockdep_map rcu_bh_lock_map;
extern struct lockdep_map rcu_sched_lock_map;
extern struct lockdep_map rcu_callback_map;
#ifdef CONFIG_DEBUG_LOCK_ALLOC
static inline void rcu_lock_acquire(struct lockdep_map *map)
{
lock_acquire(map, 0, 0, 2, 0, NULL, _THIS_IP_);
}
static inline void rcu_lock_release(struct lockdep_map *map)
{
lock_release(map, _THIS_IP_);
}
int debug_lockdep_rcu_enabled(void);
int rcu_read_lock_held(void);
int rcu_read_lock_bh_held(void);
int rcu_read_lock_sched_held(void);
int rcu_read_lock_any_held(void);
#else /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
# define rcu_lock_acquire(a) do { } while (0)
# define rcu_lock_release(a) do { } while (0)
static inline int rcu_read_lock_held(void)
{
return 1;
}
static inline int rcu_read_lock_bh_held(void)
{
return 1;
}
static inline int rcu_read_lock_sched_held(void)
{
return !preemptible();
}
static inline int rcu_read_lock_any_held(void)
{
return !preemptible();
}
#endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */
#ifdef CONFIG_PROVE_RCU
/**
* RCU_LOCKDEP_WARN - emit lockdep splat if specified condition is met
* @c: condition to check
* @s: informative message
*/
#define RCU_LOCKDEP_WARN(c, s) \
do { \
static bool __section(".data.unlikely") __warned; \
if ((c) && debug_lockdep_rcu_enabled() && !__warned) { \
__warned = true; \
lockdep_rcu_suspicious(__FILE__, __LINE__, s); \
} \
} while (0)
#if defined(CONFIG_PROVE_RCU) && !defined(CONFIG_PREEMPT_RCU)
static inline void rcu_preempt_sleep_check(void)
{
RCU_LOCKDEP_WARN(lock_is_held(&rcu_lock_map),
"Illegal context switch in RCU read-side critical section");
}
#else /* #ifdef CONFIG_PROVE_RCU */
static inline void rcu_preempt_sleep_check(void) { }
#endif /* #else #ifdef CONFIG_PROVE_RCU */
#define rcu_sleep_check() \
do { \
rcu_preempt_sleep_check(); \
if (!IS_ENABLED(CONFIG_PREEMPT_RT)) \
RCU_LOCKDEP_WARN(lock_is_held(&rcu_bh_lock_map), \
"Illegal context switch in RCU-bh read-side critical section"); \
RCU_LOCKDEP_WARN(lock_is_held(&rcu_sched_lock_map), \
"Illegal context switch in RCU-sched read-side critical section"); \
} while (0)
#else /* #ifdef CONFIG_PROVE_RCU */
#define RCU_LOCKDEP_WARN(c, s) do { } while (0 && (c))
#define rcu_sleep_check() do { } while (0)
#endif /* #else #ifdef CONFIG_PROVE_RCU */
/*
* Helper functions for rcu_dereference_check(), rcu_dereference_protected()
* and rcu_assign_pointer(). Some of these could be folded into their
* callers, but they are left separate in order to ease introduction of
* multiple pointers markings to match different RCU implementations
* (e.g., __srcu), should this make sense in the future.
*/
#ifdef __CHECKER__
#define rcu_check_sparse(p, space) \
((void)(((typeof(*p) space *)p) == p))
#else /* #ifdef __CHECKER__ */
#define rcu_check_sparse(p, space)
#endif /* #else #ifdef __CHECKER__ */
/**
* unrcu_pointer - mark a pointer as not being RCU protected
* @p: pointer needing to lose its __rcu property
*
* Converts @p from an __rcu pointer to a __kernel pointer.
* This allows an __rcu pointer to be used with xchg() and friends.
*/
#define unrcu_pointer(p) \
({ \
typeof(*p) *_________p1 = (typeof(*p) *__force)(p); \
rcu_check_sparse(p, __rcu); \
((typeof(*p) __force __kernel *)(_________p1)); \
})
#define __rcu_access_pointer(p, space) \
({ \
typeof(*p) *_________p1 = (typeof(*p) *__force)READ_ONCE(p); \
rcu_check_sparse(p, space); \
((typeof(*p) __force __kernel *)(_________p1)); \
})
#define __rcu_dereference_check(p, c, space) \
({ \
/* Dependency order vs. p above. */ \
typeof(*p) *________p1 = (typeof(*p) *__force)READ_ONCE(p); \
RCU_LOCKDEP_WARN(!(c), "suspicious rcu_dereference_check() usage"); \
rcu_check_sparse(p, space); \
((typeof(*p) __force __kernel *)(________p1)); \
})
#define __rcu_dereference_protected(p, c, space) \
({ \
RCU_LOCKDEP_WARN(!(c), "suspicious rcu_dereference_protected() usage"); \
rcu_check_sparse(p, space); \
((typeof(*p) __force __kernel *)(p)); \
})
#define rcu_dereference_raw(p) \
({ \
/* Dependency order vs. p above. */ \
typeof(p) ________p1 = READ_ONCE(p); \
((typeof(*p) __force __kernel *)(________p1)); \
})
/**
* RCU_INITIALIZER() - statically initialize an RCU-protected global variable
* @v: The value to statically initialize with.
*/
#define RCU_INITIALIZER(v) (typeof(*(v)) __force __rcu *)(v)
/**
* rcu_assign_pointer() - assign to RCU-protected pointer
* @p: pointer to assign to
* @v: value to assign (publish)
*
* Assigns the specified value to the specified RCU-protected
* pointer, ensuring that any concurrent RCU readers will see
* any prior initialization.
*
* Inserts memory barriers on architectures that require them
* (which is most of them), and also prevents the compiler from
* reordering the code that initializes the structure after the pointer
* assignment. More importantly, this call documents which pointers
* will be dereferenced by RCU read-side code.
*
* In some special cases, you may use RCU_INIT_POINTER() instead
* of rcu_assign_pointer(). RCU_INIT_POINTER() is a bit faster due
* to the fact that it does not constrain either the CPU or the compiler.
* That said, using RCU_INIT_POINTER() when you should have used
* rcu_assign_pointer() is a very bad thing that results in
* impossible-to-diagnose memory corruption. So please be careful.
* See the RCU_INIT_POINTER() comment header for details.
*
* Note that rcu_assign_pointer() evaluates each of its arguments only
* once, appearances notwithstanding. One of the "extra" evaluations
* is in typeof() and the other visible only to sparse (__CHECKER__),
* neither of which actually execute the argument. As with most cpp
* macros, this execute-arguments-only-once property is important, so
* please be careful when making changes to rcu_assign_pointer() and the
* other macros that it invokes.
*/
#define rcu_assign_pointer(p, v) \
do { \
uintptr_t _r_a_p__v = (uintptr_t)(v); \
rcu_check_sparse(p, __rcu); \
\
if (__builtin_constant_p(v) && (_r_a_p__v) == (uintptr_t)NULL) \
WRITE_ONCE((p), (typeof(p))(_r_a_p__v)); \
else \
smp_store_release(&p, RCU_INITIALIZER((typeof(p))_r_a_p__v)); \
} while (0)
/**
* rcu_replace_pointer() - replace an RCU pointer, returning its old value
* @rcu_ptr: RCU pointer, whose old value is returned
* @ptr: regular pointer
* @c: the lockdep conditions under which the dereference will take place
*
* Perform a replacement, where @rcu_ptr is an RCU-annotated
* pointer and @c is the lockdep argument that is passed to the
* rcu_dereference_protected() call used to read that pointer. The old
* value of @rcu_ptr is returned, and @rcu_ptr is set to @ptr.
*/
#define rcu_replace_pointer(rcu_ptr, ptr, c) \
({ \
typeof(ptr) __tmp = rcu_dereference_protected((rcu_ptr), (c)); \
rcu_assign_pointer((rcu_ptr), (ptr)); \
__tmp; \
})
/**
* rcu_access_pointer() - fetch RCU pointer with no dereferencing
* @p: The pointer to read
*
* Return the value of the specified RCU-protected pointer, but omit the
* lockdep checks for being in an RCU read-side critical section. This is
* useful when the value of this pointer is accessed, but the pointer is
* not dereferenced, for example, when testing an RCU-protected pointer
* against NULL. Although rcu_access_pointer() may also be used in cases
* where update-side locks prevent the value of the pointer from changing,
* you should instead use rcu_dereference_protected() for this use case.
*
* It is also permissible to use rcu_access_pointer() when read-side
* access to the pointer was removed at least one grace period ago, as
* is the case in the context of the RCU callback that is freeing up
* the data, or after a synchronize_rcu() returns. This can be useful
* when tearing down multi-linked structures after a grace period
* has elapsed.
*/
#define rcu_access_pointer(p) __rcu_access_pointer((p), __rcu)
/**
* rcu_dereference_check() - rcu_dereference with debug checking
* @p: The pointer to read, prior to dereferencing
* @c: The conditions under which the dereference will take place
*
* Do an rcu_dereference(), but check that the conditions under which the
* dereference will take place are correct. Typically the conditions
* indicate the various locking conditions that should be held at that
* point. The check should return true if the conditions are satisfied.
* An implicit check for being in an RCU read-side critical section
* (rcu_read_lock()) is included.
*
* For example:
*
* bar = rcu_dereference_check(foo->bar, lockdep_is_held(&foo->lock));
*
* could be used to indicate to lockdep that foo->bar may only be dereferenced
* if either rcu_read_lock() is held, or that the lock required to replace
* the bar struct at foo->bar is held.
*
* Note that the list of conditions may also include indications of when a lock
* need not be held, for example during initialisation or destruction of the
* target struct:
*
* bar = rcu_dereference_check(foo->bar, lockdep_is_held(&foo->lock) ||
* atomic_read(&foo->usage) == 0);
*
* Inserts memory barriers on architectures that require them
* (currently only the Alpha), prevents the compiler from refetching
* (and from merging fetches), and, more importantly, documents exactly
* which pointers are protected by RCU and checks that the pointer is
* annotated as __rcu.
*/
#define rcu_dereference_check(p, c) \
__rcu_dereference_check((p), (c) || rcu_read_lock_held(), __rcu)
/**
* rcu_dereference_bh_check() - rcu_dereference_bh with debug checking
* @p: The pointer to read, prior to dereferencing
* @c: The conditions under which the dereference will take place
*
* This is the RCU-bh counterpart to rcu_dereference_check(). However,
* please note that starting in v5.0 kernels, vanilla RCU grace periods
* wait for local_bh_disable() regions of code in addition to regions of
* code demarked by rcu_read_lock() and rcu_read_unlock(). This means
* that synchronize_rcu(), call_rcu, and friends all take not only
* rcu_read_lock() but also rcu_read_lock_bh() into account.
*/
#define rcu_dereference_bh_check(p, c) \
__rcu_dereference_check((p), (c) || rcu_read_lock_bh_held(), __rcu)
/**
* rcu_dereference_sched_check() - rcu_dereference_sched with debug checking
* @p: The pointer to read, prior to dereferencing
* @c: The conditions under which the dereference will take place
*
* This is the RCU-sched counterpart to rcu_dereference_check().
* However, please note that starting in v5.0 kernels, vanilla RCU grace
* periods wait for preempt_disable() regions of code in addition to
* regions of code demarked by rcu_read_lock() and rcu_read_unlock().
* This means that synchronize_rcu(), call_rcu, and friends all take not
* only rcu_read_lock() but also rcu_read_lock_sched() into account.
*/
#define rcu_dereference_sched_check(p, c) \
__rcu_dereference_check((p), (c) || rcu_read_lock_sched_held(), \
__rcu)
/*
* The tracing infrastructure traces RCU (we want that), but unfortunately
* some of the RCU checks causes tracing to lock up the system.
*
* The no-tracing version of rcu_dereference_raw() must not call
* rcu_read_lock_held().
*/
#define rcu_dereference_raw_check(p) __rcu_dereference_check((p), 1, __rcu)
/**
* rcu_dereference_protected() - fetch RCU pointer when updates prevented
* @p: The pointer to read, prior to dereferencing
* @c: The conditions under which the dereference will take place
*
* Return the value of the specified RCU-protected pointer, but omit
* the READ_ONCE(). This is useful in cases where update-side locks
* prevent the value of the pointer from changing. Please note that this
* primitive does *not* prevent the compiler from repeating this reference
* or combining it with other references, so it should not be used without
* protection of appropriate locks.
*
* This function is only for update-side use. Using this function
* when protected only by rcu_read_lock() will result in infrequent
* but very ugly failures.
*/
#define rcu_dereference_protected(p, c) \
__rcu_dereference_protected((p), (c), __rcu)
/**
* rcu_dereference() - fetch RCU-protected pointer for dereferencing
* @p: The pointer to read, prior to dereferencing
*
* This is a simple wrapper around rcu_dereference_check().
*/
#define rcu_dereference(p) rcu_dereference_check(p, 0)
/**
* rcu_dereference_bh() - fetch an RCU-bh-protected pointer for dereferencing
* @p: The pointer to read, prior to dereferencing
*
* Makes rcu_dereference_check() do the dirty work.
*/
#define rcu_dereference_bh(p) rcu_dereference_bh_check(p, 0)
/**
* rcu_dereference_sched() - fetch RCU-sched-protected pointer for dereferencing
* @p: The pointer to read, prior to dereferencing
*
* Makes rcu_dereference_check() do the dirty work.
*/
#define rcu_dereference_sched(p) rcu_dereference_sched_check(p, 0)
/**
* rcu_pointer_handoff() - Hand off a pointer from RCU to other mechanism
* @p: The pointer to hand off
*
* This is simply an identity function, but it documents where a pointer
* is handed off from RCU to some other synchronization mechanism, for
* example, reference counting or locking. In C11, it would map to
* kill_dependency(). It could be used as follows::
*
* rcu_read_lock();
* p = rcu_dereference(gp);
* long_lived = is_long_lived(p);
* if (long_lived) {
* if (!atomic_inc_not_zero(p->refcnt))
* long_lived = false;
* else
* p = rcu_pointer_handoff(p);
* }
* rcu_read_unlock();
*/
#define rcu_pointer_handoff(p) (p)
/**
* rcu_read_lock() - mark the beginning of an RCU read-side critical section
*
* When synchronize_rcu() is invoked on one CPU while other CPUs
* are within RCU read-side critical sections, then the
* synchronize_rcu() is guaranteed to block until after all the other
* CPUs exit their critical sections. Similarly, if call_rcu() is invoked
* on one CPU while other CPUs are within RCU read-side critical
* sections, invocation of the corresponding RCU callback is deferred
* until after the all the other CPUs exit their critical sections.
*
* In v5.0 and later kernels, synchronize_rcu() and call_rcu() also
* wait for regions of code with preemption disabled, including regions of
* code with interrupts or softirqs disabled. In pre-v5.0 kernels, which
* define synchronize_sched(), only code enclosed within rcu_read_lock()
* and rcu_read_unlock() are guaranteed to be waited for.
*
* Note, however, that RCU callbacks are permitted to run concurrently
* with new RCU read-side critical sections. One way that this can happen
* is via the following sequence of events: (1) CPU 0 enters an RCU
* read-side critical section, (2) CPU 1 invokes call_rcu() to register
* an RCU callback, (3) CPU 0 exits the RCU read-side critical section,
* (4) CPU 2 enters a RCU read-side critical section, (5) the RCU
* callback is invoked. This is legal, because the RCU read-side critical
* section that was running concurrently with the call_rcu() (and which
* therefore might be referencing something that the corresponding RCU
* callback would free up) has completed before the corresponding
* RCU callback is invoked.
*
* RCU read-side critical sections may be nested. Any deferred actions
* will be deferred until the outermost RCU read-side critical section
* completes.
*
* You can avoid reading and understanding the next paragraph by
* following this rule: don't put anything in an rcu_read_lock() RCU
* read-side critical section that would block in a !PREEMPTION kernel.
* But if you want the full story, read on!
*
* In non-preemptible RCU implementations (pure TREE_RCU and TINY_RCU),
* it is illegal to block while in an RCU read-side critical section.
* In preemptible RCU implementations (PREEMPT_RCU) in CONFIG_PREEMPTION
* kernel builds, RCU read-side critical sections may be preempted,
* but explicit blocking is illegal. Finally, in preemptible RCU
* implementations in real-time (with -rt patchset) kernel builds, RCU
* read-side critical sections may be preempted and they may also block, but
* only when acquiring spinlocks that are subject to priority inheritance.
*/
static __always_inline void rcu_read_lock(void)
{
__rcu_read_lock();
__acquire(RCU);
rcu_lock_acquire(&rcu_lock_map);
RCU_LOCKDEP_WARN(!rcu_is_watching(),
"rcu_read_lock() used illegally while idle");
}
/*
* So where is rcu_write_lock()? It does not exist, as there is no
* way for writers to lock out RCU readers. This is a feature, not
* a bug -- this property is what provides RCU's performance benefits.
* Of course, writers must coordinate with each other. The normal
* spinlock primitives work well for this, but any other technique may be
* used as well. RCU does not care how the writers keep out of each
* others' way, as long as they do so.
*/
/**
* rcu_read_unlock() - marks the end of an RCU read-side critical section.
*
* In almost all situations, rcu_read_unlock() is immune from deadlock.
* In recent kernels that have consolidated synchronize_sched() and
* synchronize_rcu_bh() into synchronize_rcu(), this deadlock immunity
* also extends to the scheduler's runqueue and priority-inheritance
* spinlocks, courtesy of the quiescent-state deferral that is carried
* out when rcu_read_unlock() is invoked with interrupts disabled.
*
* See rcu_read_lock() for more information.
*/
static inline void rcu_read_unlock(void)
{
RCU_LOCKDEP_WARN(!rcu_is_watching(),
"rcu_read_unlock() used illegally while idle");
__release(RCU);
__rcu_read_unlock();
rcu_lock_release(&rcu_lock_map); /* Keep acq info for rls diags. */
}
/**
* rcu_read_lock_bh() - mark the beginning of an RCU-bh critical section
*
* This is equivalent to rcu_read_lock(), but also disables softirqs.
* Note that anything else that disables softirqs can also serve as an RCU
* read-side critical section. However, please note that this equivalence
* applies only to v5.0 and later. Before v5.0, rcu_read_lock() and
* rcu_read_lock_bh() were unrelated.
*
* Note that rcu_read_lock_bh() and the matching rcu_read_unlock_bh()
* must occur in the same context, for example, it is illegal to invoke
* rcu_read_unlock_bh() from one task if the matching rcu_read_lock_bh()
* was invoked from some other task.
*/
static inline void rcu_read_lock_bh(void)
{
local_bh_disable();
__acquire(RCU_BH);
rcu_lock_acquire(&rcu_bh_lock_map);
RCU_LOCKDEP_WARN(!rcu_is_watching(),
"rcu_read_lock_bh() used illegally while idle");
}
/**
* rcu_read_unlock_bh() - marks the end of a softirq-only RCU critical section
*
* See rcu_read_lock_bh() for more information.
*/
static inline void rcu_read_unlock_bh(void)
{
RCU_LOCKDEP_WARN(!rcu_is_watching(),
"rcu_read_unlock_bh() used illegally while idle");
rcu_lock_release(&rcu_bh_lock_map);
__release(RCU_BH);
local_bh_enable();
}
/**
* rcu_read_lock_sched() - mark the beginning of a RCU-sched critical section
*
* This is equivalent to rcu_read_lock(), but also disables preemption.
* Read-side critical sections can also be introduced by anything else that
* disables preemption, including local_irq_disable() and friends. However,
* please note that the equivalence to rcu_read_lock() applies only to
* v5.0 and later. Before v5.0, rcu_read_lock() and rcu_read_lock_sched()
* were unrelated.
*
* Note that rcu_read_lock_sched() and the matching rcu_read_unlock_sched()
* must occur in the same context, for example, it is illegal to invoke
* rcu_read_unlock_sched() from process context if the matching
* rcu_read_lock_sched() was invoked from an NMI handler.
*/
static inline void rcu_read_lock_sched(void)
{
preempt_disable();
__acquire(RCU_SCHED);
rcu_lock_acquire(&rcu_sched_lock_map);
RCU_LOCKDEP_WARN(!rcu_is_watching(),
"rcu_read_lock_sched() used illegally while idle");
}
/* Used by lockdep and tracing: cannot be traced, cannot call lockdep. */
static inline notrace void rcu_read_lock_sched_notrace(void)
{
preempt_disable_notrace();
__acquire(RCU_SCHED);
}
/**
* rcu_read_unlock_sched() - marks the end of a RCU-classic critical section
*
* See rcu_read_lock_sched() for more information.
*/
static inline void rcu_read_unlock_sched(void)
{
RCU_LOCKDEP_WARN(!rcu_is_watching(),
"rcu_read_unlock_sched() used illegally while idle");
rcu_lock_release(&rcu_sched_lock_map);
__release(RCU_SCHED);
preempt_enable();
}
/* Used by lockdep and tracing: cannot be traced, cannot call lockdep. */
static inline notrace void rcu_read_unlock_sched_notrace(void)
{
__release(RCU_SCHED);
preempt_enable_notrace();
}
/**
* RCU_INIT_POINTER() - initialize an RCU protected pointer
* @p: The pointer to be initialized.
* @v: The value to initialized the pointer to.
*
* Initialize an RCU-protected pointer in special cases where readers
* do not need ordering constraints on the CPU or the compiler. These
* special cases are:
*
* 1. This use of RCU_INIT_POINTER() is NULLing out the pointer *or*
* 2. The caller has taken whatever steps are required to prevent
* RCU readers from concurrently accessing this pointer *or*
* 3. The referenced data structure has already been exposed to
* readers either at compile time or via rcu_assign_pointer() *and*
*
* a. You have not made *any* reader-visible changes to
* this structure since then *or*
* b. It is OK for readers accessing this structure from its
* new location to see the old state of the structure. (For
* example, the changes were to statistical counters or to
* other state where exact synchronization is not required.)
*
* Failure to follow these rules governing use of RCU_INIT_POINTER() will
* result in impossible-to-diagnose memory corruption. As in the structures
* will look OK in crash dumps, but any concurrent RCU readers might
* see pre-initialized values of the referenced data structure. So
* please be very careful how you use RCU_INIT_POINTER()!!!
*
* If you are creating an RCU-protected linked structure that is accessed
* by a single external-to-structure RCU-protected pointer, then you may
* use RCU_INIT_POINTER() to initialize the internal RCU-protected
* pointers, but you must use rcu_assign_pointer() to initialize the
* external-to-structure pointer *after* you have completely initialized
* the reader-accessible portions of the linked structure.
*
* Note that unlike rcu_assign_pointer(), RCU_INIT_POINTER() provides no
* ordering guarantees for either the CPU or the compiler.
*/
#define RCU_INIT_POINTER(p, v) \
do { \
rcu_check_sparse(p, __rcu); \
WRITE_ONCE(p, RCU_INITIALIZER(v)); \
} while (0)
/**
* RCU_POINTER_INITIALIZER() - statically initialize an RCU protected pointer
* @p: The pointer to be initialized.
* @v: The value to initialized the pointer to.
*
* GCC-style initialization for an RCU-protected pointer in a structure field.
*/
#define RCU_POINTER_INITIALIZER(p, v) \
.p = RCU_INITIALIZER(v)
/*
* Does the specified offset indicate that the corresponding rcu_head
* structure can be handled by kvfree_rcu()?
*/
#define __is_kvfree_rcu_offset(offset) ((offset) < 4096)
/**
* kfree_rcu() - kfree an object after a grace period.
* @ptr: pointer to kfree for both single- and double-argument invocations.
* @rhf: the name of the struct rcu_head within the type of @ptr,
* but only for double-argument invocations.
*
* Many rcu callbacks functions just call kfree() on the base structure.
* These functions are trivial, but their size adds up, and furthermore
* when they are used in a kernel module, that module must invoke the
* high-latency rcu_barrier() function at module-unload time.
*
* The kfree_rcu() function handles this issue. Rather than encoding a
* function address in the embedded rcu_head structure, kfree_rcu() instead
* encodes the offset of the rcu_head structure within the base structure.
* Because the functions are not allowed in the low-order 4096 bytes of
* kernel virtual memory, offsets up to 4095 bytes can be accommodated.
* If the offset is larger than 4095 bytes, a compile-time error will
* be generated in kvfree_rcu_arg_2(). If this error is triggered, you can
* either fall back to use of call_rcu() or rearrange the structure to
* position the rcu_head structure into the first 4096 bytes.
*
* Note that the allowable offset might decrease in the future, for example,
* to allow something like kmem_cache_free_rcu().
*
* The BUILD_BUG_ON check must not involve any function calls, hence the
* checks are done in macros here.
*/
#define kfree_rcu(ptr, rhf...) kvfree_rcu(ptr, ## rhf)
/**
* kvfree_rcu() - kvfree an object after a grace period.
*
* This macro consists of one or two arguments and it is
* based on whether an object is head-less or not. If it
* has a head then a semantic stays the same as it used
* to be before:
*
* kvfree_rcu(ptr, rhf);
*
* where @ptr is a pointer to kvfree(), @rhf is the name
* of the rcu_head structure within the type of @ptr.
*
* When it comes to head-less variant, only one argument
* is passed and that is just a pointer which has to be
* freed after a grace period. Therefore the semantic is
*
* kvfree_rcu(ptr);
*
* where @ptr is a pointer to kvfree().
*
* Please note, head-less way of freeing is permitted to
* use from a context that has to follow might_sleep()
* annotation. Otherwise, please switch and embed the
* rcu_head structure within the type of @ptr.
*/
#define kvfree_rcu(...) KVFREE_GET_MACRO(__VA_ARGS__, \
kvfree_rcu_arg_2, kvfree_rcu_arg_1)(__VA_ARGS__)
#define KVFREE_GET_MACRO(_1, _2, NAME, ...) NAME
#define kvfree_rcu_arg_2(ptr, rhf) \
do { \
typeof (ptr) ___p = (ptr); \
\
if (___p) { \
BUILD_BUG_ON(!__is_kvfree_rcu_offset(offsetof(typeof(*(ptr)), rhf))); \
kvfree_call_rcu(&((___p)->rhf), (rcu_callback_t)(unsigned long) \
(offsetof(typeof(*(ptr)), rhf))); \
} \
} while (0)
#define kvfree_rcu_arg_1(ptr) \
do { \
typeof(ptr) ___p = (ptr); \
\
if (___p) \
kvfree_call_rcu(NULL, (rcu_callback_t) (___p)); \
} while (0)
/*
* Place this after a lock-acquisition primitive to guarantee that
* an UNLOCK+LOCK pair acts as a full barrier. This guarantee applies
* if the UNLOCK and LOCK are executed by the same CPU or if the
* UNLOCK and LOCK operate on the same lock variable.
*/
#ifdef CONFIG_ARCH_WEAK_RELEASE_ACQUIRE
#define smp_mb__after_unlock_lock() smp_mb() /* Full ordering for lock. */
#else /* #ifdef CONFIG_ARCH_WEAK_RELEASE_ACQUIRE */
#define smp_mb__after_unlock_lock() do { } while (0)
#endif /* #else #ifdef CONFIG_ARCH_WEAK_RELEASE_ACQUIRE */
/* Has the specified rcu_head structure been handed to call_rcu()? */
/**
* rcu_head_init - Initialize rcu_head for rcu_head_after_call_rcu()
* @rhp: The rcu_head structure to initialize.
*
* If you intend to invoke rcu_head_after_call_rcu() to test whether a
* given rcu_head structure has already been passed to call_rcu(), then
* you must also invoke this rcu_head_init() function on it just after
* allocating that structure. Calls to this function must not race with
* calls to call_rcu(), rcu_head_after_call_rcu(), or callback invocation.
*/
static inline void rcu_head_init(struct rcu_head *rhp)
{
rhp->func = (rcu_callback_t)~0L;
}
/**
* rcu_head_after_call_rcu() - Has this rcu_head been passed to call_rcu()?
* @rhp: The rcu_head structure to test.
* @f: The function passed to call_rcu() along with @rhp.
*
* Returns @true if the @rhp has been passed to call_rcu() with @func,
* and @false otherwise. Emits a warning in any other case, including
* the case where @rhp has already been invoked after a grace period.
* Calls to this function must not race with callback invocation. One way
* to avoid such races is to enclose the call to rcu_head_after_call_rcu()
* in an RCU read-side critical section that includes a read-side fetch
* of the pointer to the structure containing @rhp.
*/
static inline bool
rcu_head_after_call_rcu(struct rcu_head *rhp, rcu_callback_t f)
{
rcu_callback_t func = READ_ONCE(rhp->func);
if (func == f)
return true;
WARN_ON_ONCE(func != (rcu_callback_t)~0L);
return false;
}
/* kernel/ksysfs.c definitions */
extern int rcu_expedited;
extern int rcu_normal;
#endif /* __LINUX_RCUPDATE_H */