[SCSI] aacraid: add parameter to control FUA and SYNCHRONIZE_CACHE policy
aacraid.cache parameter, Disable Queue Flush commands:
bit 0 - Disable FUA in WRITE SCSI commands
bit 1 - Disable SYNCHRONIZE_CACHE SCSI command
bit 2 - Disable only if Battery not protecting adapter supplied Cache
e.g.: aacraid.cache=7 will disable the FUA and SYNCHRONIZE_CACHE
commands if the adapter has reported that it's cache is battery backed
up.
This parameter permits experimentation with tradeoffs between
performance and caching policy.
Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index cef764e..43d6aff 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -144,6 +144,7 @@
*/
static int nondasd = -1;
+static int aac_cache = 0;
static int dacmode = -1;
int aac_commit = -1;
@@ -152,6 +153,8 @@
module_param(nondasd, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(nondasd, "Control scanning of hba for nondasd devices. 0=off, 1=on");
+module_param_named(cache, aac_cache, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(cache, "Disable Queue Flush commands:\n\tbit 0 - Disable FUA in WRITE SCSI commands\n\tbit 1 - Disable SYNCHRONIZE_CACHE SCSI command\n\tbit 2 - Disable only if Battery not protecting Cache");
module_param(dacmode, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(dacmode, "Control whether dma addressing is using 64 bit DAC. 0=off, 1=on");
module_param_named(commit, aac_commit, int, S_IRUGO|S_IWUSR);
@@ -1013,7 +1016,8 @@
writecmd->block[1] = cpu_to_le32((u32)((lba&0xffffffff00000000LL)>>32));
writecmd->count = cpu_to_le32(count<<9);
writecmd->cid = cpu_to_le16(scmd_id(cmd));
- writecmd->flags = fua ?
+ writecmd->flags = (fua && ((aac_cache & 5) != 1) &&
+ (((aac_cache & 5) != 5) || !fib->dev->cache_protected)) ?
cpu_to_le16(IO_TYPE_WRITE|IO_SUREWRITE) :
cpu_to_le16(IO_TYPE_WRITE);
writecmd->bpTotal = 0;
@@ -1325,11 +1329,11 @@
}
}
+ dev->cache_protected = 0;
dev->nondasd_support = 0;
dev->raid_scsi_mode = 0;
- if(dev->adapter_info.options & AAC_OPT_NONDASD){
+ if(dev->adapter_info.options & AAC_OPT_NONDASD)
dev->nondasd_support = 1;
- }
/*
* If the firmware supports ROMB RAID/SCSI mode and we are currently
@@ -1351,10 +1355,9 @@
printk(KERN_INFO "%s%d: ROMB RAID/SCSI mode enabled\n",
dev->name, dev->id);
- if(nondasd != -1) {
+ if (nondasd != -1)
dev->nondasd_support = (nondasd!=0);
- }
- if(dev->nondasd_support != 0){
+ if(dev->nondasd_support != 0) {
printk(KERN_INFO "%s%d: Non-DASD support enabled.\n",dev->name, dev->id);
}
@@ -2106,7 +2109,7 @@
mode_buf[2] = 0; /* Device-specific param,
bit 8: 0/1 = write enabled/protected
bit 4: 0/1 = FUA enabled */
- if (dev->raw_io_interface)
+ if (dev->raw_io_interface && ((aac_cache & 5) != 1))
mode_buf[2] = 0x10;
mode_buf[3] = 0; /* Block descriptor length */
if (((scsicmd->cmnd[2] & 0x3f) == 8) ||
@@ -2114,7 +2117,8 @@
mode_buf[0] = 6;
mode_buf[4] = 8;
mode_buf[5] = 1;
- mode_buf[6] = 0x04; /* WCE */
+ mode_buf[6] = ((aac_cache & 6) == 2)
+ ? 0 : 0x04; /* WCE */
mode_buf_length = 7;
if (mode_buf_length > scsicmd->cmnd[4])
mode_buf_length = scsicmd->cmnd[4];
@@ -2137,7 +2141,7 @@
mode_buf[3] = 0; /* Device-specific param,
bit 8: 0/1 = write enabled/protected
bit 4: 0/1 = FUA enabled */
- if (dev->raw_io_interface)
+ if (dev->raw_io_interface && ((aac_cache & 5) != 1))
mode_buf[3] = 0x10;
mode_buf[4] = 0; /* reserved */
mode_buf[5] = 0; /* reserved */
@@ -2148,7 +2152,8 @@
mode_buf[1] = 9;
mode_buf[8] = 8;
mode_buf[9] = 1;
- mode_buf[10] = 0x04; /* WCE */
+ mode_buf[10] = ((aac_cache & 6) == 2)
+ ? 0 : 0x04; /* WCE */
mode_buf_length = 11;
if (mode_buf_length > scsicmd->cmnd[8])
mode_buf_length = scsicmd->cmnd[8];
@@ -2224,9 +2229,16 @@
return aac_write(scsicmd);
case SYNCHRONIZE_CACHE:
+ if (((aac_cache & 6) == 6) && dev->cache_protected) {
+ scsicmd->result = DID_OK << 16 |
+ COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
+ scsicmd->scsi_done(scsicmd);
+ return 0;
+ }
/* Issue FIB to tell Firmware to flush it's cache */
- return aac_synchronize(scsicmd);
-
+ if ((aac_cache & 6) != 2)
+ return aac_synchronize(scsicmd);
+ /* FALLTHRU */
default:
/*
* Unhandled commands
