Merge tag 'pwm/for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm changes from Thierry Reding:
"The legacy HAVE_PWM Kconfig symbol is finally being retired. Thanks a
lot to Sascha Hauer for doing that.
Three new drivers are added: Freescale FTM, Cirrus Logic CLPS711X and
Intel Low Power Subsystem.
An assortment of fixes and cleanups rounds things off for this release
cycle"
* tag 'pwm/for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: pxa: Constify OF match table
pwm: pxa: Fix typo "pwm" -> "PWM"
Revert "pwm: pxa: Use of_match_ptr()"
pwm: add support for Intel Low Power Subsystem PWM
pwm: Add CLPS711X PWM support
pwm: atmel: correct CDTY calculation
pwm: atmel: Fix polarity handling
Documentation: Add device tree bindings for Freescale FTM PWM.
pwm: Add Freescale FTM PWM driver support
pwm: pxa: Use of_match_ptr()
pwm: samsung: Use SIMPLE_DEV_PM_OPS macro
pwm: renesas-tpu: Add dependency on HAS_IOMEM
pwm: Remove obsolete HAVE_PWM Kconfig symbol
diff --git a/Documentation/devicetree/bindings/pwm/cirrus,clps711x-pwm.txt b/Documentation/devicetree/bindings/pwm/cirrus,clps711x-pwm.txt
new file mode 100644
index 0000000..a183db4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/cirrus,clps711x-pwm.txt
@@ -0,0 +1,16 @@
+* Cirris Logic CLPS711X PWM controller
+
+Required properties:
+- compatible: Shall contain "cirrus,clps711x-pwm".
+- reg: Physical base address and length of the controller's registers.
+- clocks: phandle + clock specifier pair of the PWM reference clock.
+- #pwm-cells: Should be 1. The cell specifies the index of the channel.
+
+Example:
+ pwm: pwm@80000400 {
+ compatible = "cirrus,ep7312-pwm",
+ "cirrus,clps711x-pwm";
+ reg = <0x80000400 0x4>;
+ clocks = <&clks 8>;
+ #pwm-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt b/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt
new file mode 100644
index 0000000..0bda229
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt
@@ -0,0 +1,35 @@
+Freescale FlexTimer Module (FTM) PWM controller
+
+Required properties:
+- compatible: Should be "fsl,vf610-ftm-pwm".
+- reg: Physical base address and length of the controller's registers
+- #pwm-cells: Should be 3. See pwm.txt in this directory for a description of
+ the cells format.
+- clock-names: Should include the following module clock source entries:
+ "ftm_sys" (module clock, also can be used as counter clock),
+ "ftm_ext" (external counter clock),
+ "ftm_fix" (fixed counter clock),
+ "ftm_cnt_clk_en" (external and fixed counter clock enable/disable).
+- clocks: Must contain a phandle and clock specifier for each entry in
+ clock-names, please see clock/clock-bindings.txt for details of the property
+ values.
+- pinctrl-names: Must contain a "default" entry.
+- pinctrl-NNN: One property must exist for each entry in pinctrl-names.
+ See pinctrl/pinctrl-bindings.txt for details of the property values.
+
+
+Example:
+
+pwm0: pwm@40038000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ reg = <0x40038000 0x1000>;
+ #pwm-cells = <3>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clks VF610_CLK_FTM0>,
+ <&clks VF610_CLK_FTM0_EXT_SEL>,
+ <&clks VF610_CLK_FTM0_FIX_SEL>,
+ <&clks VF610_CLK_FTM0_EXT_FIX_EN>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_1>;
+};
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b4935db..d7a71e3 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -113,9 +113,6 @@
endif
-config HAVE_PWM
- bool
-
config MIGHT_HAVE_PCI
bool
@@ -633,7 +630,6 @@
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
select HAVE_IDE
- select HAVE_PWM
select USE_OF
help
Support for the NXP LPC32XX family of processors
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index a280cc4..e6690a4 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -7,7 +7,6 @@
config MACH_PXA3XX_DT
bool "Support PXA3xx platforms from device tree"
select CPU_PXA300
- select HAVE_PWM
select POWER_SUPPLY
select PXA3xx
select USE_OF
@@ -23,12 +22,10 @@
config MACH_MAINSTONE
bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
- select HAVE_PWM
select PXA27x
config MACH_ZYLONITE
bool
- select HAVE_PWM
select PXA3xx
config MACH_ZYLONITE300
@@ -123,7 +120,6 @@
bool "CompuLab CM-X300 modules"
select CPU_PXA300
select CPU_PXA310
- select HAVE_PWM
select PXA3xx
config MACH_CAPC7117
@@ -214,7 +210,6 @@
config MACH_LOGICPD_PXA270
bool "LogicPD PXA270 Card Engine Development Platform"
- select HAVE_PWM
select PXA27x
config MACH_PCM027
@@ -225,7 +220,6 @@
config MACH_PCM990_BASEBOARD
bool "PHYTEC PCM-990 development board"
depends on MACH_PCM027
- select HAVE_PWM
choice
prompt "display on pcm990"
@@ -249,7 +243,6 @@
config MACH_COLIBRI_PXA270_INCOME
bool "Income s.r.o. PXA270 SBC"
depends on MACH_COLIBRI
- select HAVE_PWM
select PXA27x
config MACH_COLIBRI300
@@ -278,7 +271,6 @@
config MACH_H4700
bool "HP iPAQ hx4700"
- select HAVE_PWM
select IWMMXT
select PXA27x
@@ -292,14 +284,12 @@
config MACH_MAGICIAN
bool "Enable HTC Magician Support"
- select HAVE_PWM
select IWMMXT
select PXA27x
config MACH_MIOA701
bool "Mitac Mio A701 Support"
select GPIO_SYSFS
- select HAVE_PWM
select IWMMXT
select PXA27x
help
@@ -309,7 +299,6 @@
config PXA_EZX
bool "Motorola EZX Platform"
- select HAVE_PWM
select IWMMXT
select PXA27x
@@ -349,7 +338,6 @@
config ARCH_PXA_PALM
bool "PXA based Palm PDAs"
- select HAVE_PWM
config MACH_PALM27X
bool
@@ -447,7 +435,6 @@
config MACH_RAUMFELD_RC
bool "Raumfeld Controller"
select CPU_PXA300
- select HAVE_PWM
select POWER_SUPPLY
select PXA3xx
@@ -611,7 +598,6 @@
config MACH_ZIPIT2
bool "Zipit Z2 Handheld"
- select HAVE_PWM
select PXA27x
endmenu
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index f772981..5928ea7 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -156,7 +156,7 @@
config INPUT_MAX8997_HAPTIC
tristate "MAXIM MAX8997 haptic controller support"
- depends on PWM && HAVE_PWM && MFD_MAX8997
+ depends on PWM && MFD_MAX8997
select INPUT_FF_MEMLESS
help
This option enables device driver support for the haptic controller
@@ -470,7 +470,7 @@
config INPUT_PWM_BEEPER
tristate "PWM beeper support"
- depends on PWM && HAVE_PWM
+ depends on PWM
help
Say Y here to get support for PWM based beeper devices.
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 22f2f28..5b34ff2 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -71,6 +71,15 @@
To compile this driver as a module, choose M here: the module
will be called pwm-bfin.
+config PWM_CLPS711X
+ tristate "CLPS711X PWM support"
+ depends on ARCH_CLPS711X || COMPILE_TEST
+ help
+ Generic PWM framework driver for Cirrus Logic CLPS711X.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-clps711x.
+
config PWM_EP93XX
tristate "Cirrus Logic EP93xx PWM support"
depends on ARCH_EP93XX
@@ -80,6 +89,16 @@
To compile this driver as a module, choose M here: the module
will be called pwm-ep93xx.
+config PWM_FSL_FTM
+ tristate "Freescale FlexTimer Module (FTM) PWM support"
+ depends on OF
+ help
+ Generic FTM PWM framework driver for Freescale VF610 and
+ Layerscape LS-1 SoCs.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-fsl-ftm.
+
config PWM_IMX
tristate "i.MX PWM support"
depends on ARCH_MXC
@@ -119,6 +138,16 @@
To compile this driver as a module, choose M here: the module
will be called pwm-lpc32xx.
+config PWM_LPSS
+ tristate "Intel LPSS PWM support"
+ depends on ACPI
+ help
+ Generic PWM framework driver for Intel Low Power Subsystem PWM
+ controller.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-lpss.
+
config PWM_MXS
tristate "Freescale MXS PWM support"
depends on ARCH_MXS && OF
@@ -160,6 +189,7 @@
config PWM_RENESAS_TPU
tristate "Renesas TPU PWM support"
depends on ARCH_SHMOBILE || COMPILE_TEST
+ depends on HAS_IOMEM
help
This driver exposes the Timer Pulse Unit (TPU) PWM controller found
in Renesas chips through the PWM API.
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index d8906ec..e57d2c3 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -4,11 +4,14 @@
obj-$(CONFIG_PWM_ATMEL) += pwm-atmel.o
obj-$(CONFIG_PWM_ATMEL_TCB) += pwm-atmel-tcb.o
obj-$(CONFIG_PWM_BFIN) += pwm-bfin.o
+obj-$(CONFIG_PWM_CLPS711X) += pwm-clps711x.o
obj-$(CONFIG_PWM_EP93XX) += pwm-ep93xx.o
+obj-$(CONFIG_PWM_FSL_FTM) += pwm-fsl-ftm.o
obj-$(CONFIG_PWM_IMX) += pwm-imx.o
obj-$(CONFIG_PWM_JZ4740) += pwm-jz4740.o
obj-$(CONFIG_PWM_LP3943) += pwm-lp3943.o
obj-$(CONFIG_PWM_LPC32XX) += pwm-lpc32xx.o
+obj-$(CONFIG_PWM_LPSS) += pwm-lpss.o
obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
obj-$(CONFIG_PWM_PCA9685) += pwm-pca9685.o
obj-$(CONFIG_PWM_PUV3) += pwm-puv3.o
diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c
index bf4144a..0adc952 100644
--- a/drivers/pwm/pwm-atmel.c
+++ b/drivers/pwm/pwm-atmel.c
@@ -32,6 +32,7 @@
/* Bit field in CMR */
#define PWM_CMR_CPOL (1 << 9)
#define PWM_CMR_UPD_CDTY (1 << 10)
+#define PWM_CMR_CPRE_MSK 0xF
/* The following registers for PWM v1 */
#define PWMV1_CDTY 0x04
@@ -104,6 +105,7 @@
unsigned long clk_rate, prd, dty;
unsigned long long div;
unsigned int pres = 0;
+ u32 val;
int ret;
if (test_bit(PWMF_ENABLED, &pwm->flags) && (period_ns != pwm->period)) {
@@ -131,7 +133,7 @@
prd = div;
div *= duty_ns;
do_div(div, period_ns);
- dty = div;
+ dty = prd - div;
ret = clk_enable(atmel_pwm->clk);
if (ret) {
@@ -139,7 +141,10 @@
return ret;
}
- atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, pres);
+ /* It is necessary to preserve CPOL, inside CMR */
+ val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
+ val = (val & ~PWM_CMR_CPRE_MSK) | (pres & PWM_CMR_CPRE_MSK);
+ atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
atmel_pwm->config(chip, pwm, dty, prd);
clk_disable(atmel_pwm->clk);
diff --git a/drivers/pwm/pwm-clps711x.c b/drivers/pwm/pwm-clps711x.c
new file mode 100644
index 0000000..fafb6a0
--- /dev/null
+++ b/drivers/pwm/pwm-clps711x.c
@@ -0,0 +1,176 @@
+/*
+ * Cirrus Logic CLPS711X PWM driver
+ *
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+
+struct clps711x_chip {
+ struct pwm_chip chip;
+ void __iomem *pmpcon;
+ struct clk *clk;
+ spinlock_t lock;
+};
+
+static inline struct clps711x_chip *to_clps711x_chip(struct pwm_chip *chip)
+{
+ return container_of(chip, struct clps711x_chip, chip);
+}
+
+static void clps711x_pwm_update_val(struct clps711x_chip *priv, u32 n, u32 v)
+{
+ /* PWM0 - bits 4..7, PWM1 - bits 8..11 */
+ u32 shift = (n + 1) * 4;
+ unsigned long flags;
+ u32 tmp;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ tmp = readl(priv->pmpcon);
+ tmp &= ~(0xf << shift);
+ tmp |= v << shift;
+ writel(tmp, priv->pmpcon);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static unsigned int clps711x_get_duty(struct pwm_device *pwm, unsigned int v)
+{
+ /* Duty cycle 0..15 max */
+ return DIV_ROUND_CLOSEST(v * 0xf, pwm_get_period(pwm));
+}
+
+static int clps711x_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct clps711x_chip *priv = to_clps711x_chip(chip);
+ unsigned int freq = clk_get_rate(priv->clk);
+
+ if (!freq)
+ return -EINVAL;
+
+ /* Store constant period value */
+ pwm_set_period(pwm, DIV_ROUND_CLOSEST(NSEC_PER_SEC, freq));
+
+ return 0;
+}
+
+static int clps711x_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct clps711x_chip *priv = to_clps711x_chip(chip);
+ unsigned int duty;
+
+ if (period_ns != pwm_get_period(pwm))
+ return -EINVAL;
+
+ duty = clps711x_get_duty(pwm, duty_ns);
+ clps711x_pwm_update_val(priv, pwm->hwpwm, duty);
+
+ return 0;
+}
+
+static int clps711x_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct clps711x_chip *priv = to_clps711x_chip(chip);
+ unsigned int duty;
+
+ duty = clps711x_get_duty(pwm, pwm_get_duty_cycle(pwm));
+ clps711x_pwm_update_val(priv, pwm->hwpwm, duty);
+
+ return 0;
+}
+
+static void clps711x_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct clps711x_chip *priv = to_clps711x_chip(chip);
+
+ clps711x_pwm_update_val(priv, pwm->hwpwm, 0);
+}
+
+static const struct pwm_ops clps711x_pwm_ops = {
+ .request = clps711x_pwm_request,
+ .config = clps711x_pwm_config,
+ .enable = clps711x_pwm_enable,
+ .disable = clps711x_pwm_disable,
+ .owner = THIS_MODULE,
+};
+
+static struct pwm_device *clps711x_pwm_xlate(struct pwm_chip *chip,
+ const struct of_phandle_args *args)
+{
+ if (args->args[0] >= chip->npwm)
+ return ERR_PTR(-EINVAL);
+
+ return pwm_request_from_chip(chip, args->args[0], NULL);
+}
+
+static int clps711x_pwm_probe(struct platform_device *pdev)
+{
+ struct clps711x_chip *priv;
+ struct resource *res;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->pmpcon = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->pmpcon))
+ return PTR_ERR(priv->pmpcon);
+
+ priv->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(priv->clk))
+ return PTR_ERR(priv->clk);
+
+ priv->chip.ops = &clps711x_pwm_ops;
+ priv->chip.dev = &pdev->dev;
+ priv->chip.base = -1;
+ priv->chip.npwm = 2;
+ priv->chip.of_xlate = clps711x_pwm_xlate;
+ priv->chip.of_pwm_n_cells = 1;
+
+ spin_lock_init(&priv->lock);
+
+ platform_set_drvdata(pdev, priv);
+
+ return pwmchip_add(&priv->chip);
+}
+
+static int clps711x_pwm_remove(struct platform_device *pdev)
+{
+ struct clps711x_chip *priv = platform_get_drvdata(pdev);
+
+ return pwmchip_remove(&priv->chip);
+}
+
+static const struct of_device_id __maybe_unused clps711x_pwm_dt_ids[] = {
+ { .compatible = "cirrus,clps711x-pwm", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, clps711x_pwm_dt_ids);
+
+static struct platform_driver clps711x_pwm_driver = {
+ .driver = {
+ .name = "clps711x-pwm",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(clps711x_pwm_dt_ids),
+ },
+ .probe = clps711x_pwm_probe,
+ .remove = clps711x_pwm_remove,
+};
+module_platform_driver(clps711x_pwm_driver);
+
+MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
+MODULE_DESCRIPTION("Cirrus Logic CLPS711X PWM driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-fsl-ftm.c b/drivers/pwm/pwm-fsl-ftm.c
new file mode 100644
index 0000000..420169e
--- /dev/null
+++ b/drivers/pwm/pwm-fsl-ftm.c
@@ -0,0 +1,495 @@
+/*
+ * Freescale FlexTimer Module (FTM) PWM Driver
+ *
+ * Copyright 2012-2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+#define FTM_SC 0x00
+#define FTM_SC_CLK_MASK 0x3
+#define FTM_SC_CLK_SHIFT 3
+#define FTM_SC_CLK(c) (((c) + 1) << FTM_SC_CLK_SHIFT)
+#define FTM_SC_PS_MASK 0x7
+#define FTM_SC_PS_SHIFT 0
+
+#define FTM_CNT 0x04
+#define FTM_MOD 0x08
+
+#define FTM_CSC_BASE 0x0C
+#define FTM_CSC_MSB BIT(5)
+#define FTM_CSC_MSA BIT(4)
+#define FTM_CSC_ELSB BIT(3)
+#define FTM_CSC_ELSA BIT(2)
+#define FTM_CSC(_channel) (FTM_CSC_BASE + ((_channel) * 8))
+
+#define FTM_CV_BASE 0x10
+#define FTM_CV(_channel) (FTM_CV_BASE + ((_channel) * 8))
+
+#define FTM_CNTIN 0x4C
+#define FTM_STATUS 0x50
+
+#define FTM_MODE 0x54
+#define FTM_MODE_FTMEN BIT(0)
+#define FTM_MODE_INIT BIT(2)
+#define FTM_MODE_PWMSYNC BIT(3)
+
+#define FTM_SYNC 0x58
+#define FTM_OUTINIT 0x5C
+#define FTM_OUTMASK 0x60
+#define FTM_COMBINE 0x64
+#define FTM_DEADTIME 0x68
+#define FTM_EXTTRIG 0x6C
+#define FTM_POL 0x70
+#define FTM_FMS 0x74
+#define FTM_FILTER 0x78
+#define FTM_FLTCTRL 0x7C
+#define FTM_QDCTRL 0x80
+#define FTM_CONF 0x84
+#define FTM_FLTPOL 0x88
+#define FTM_SYNCONF 0x8C
+#define FTM_INVCTRL 0x90
+#define FTM_SWOCTRL 0x94
+#define FTM_PWMLOAD 0x98
+
+enum fsl_pwm_clk {
+ FSL_PWM_CLK_SYS,
+ FSL_PWM_CLK_FIX,
+ FSL_PWM_CLK_EXT,
+ FSL_PWM_CLK_CNTEN,
+ FSL_PWM_CLK_MAX
+};
+
+struct fsl_pwm_chip {
+ struct pwm_chip chip;
+
+ struct mutex lock;
+
+ unsigned int use_count;
+ unsigned int cnt_select;
+ unsigned int clk_ps;
+
+ void __iomem *base;
+
+ int period_ns;
+
+ struct clk *clk[FSL_PWM_CLK_MAX];
+};
+
+static inline struct fsl_pwm_chip *to_fsl_chip(struct pwm_chip *chip)
+{
+ return container_of(chip, struct fsl_pwm_chip, chip);
+}
+
+static int fsl_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct fsl_pwm_chip *fpc = to_fsl_chip(chip);
+
+ return clk_prepare_enable(fpc->clk[FSL_PWM_CLK_SYS]);
+}
+
+static void fsl_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct fsl_pwm_chip *fpc = to_fsl_chip(chip);
+
+ clk_disable_unprepare(fpc->clk[FSL_PWM_CLK_SYS]);
+}
+
+static int fsl_pwm_calculate_default_ps(struct fsl_pwm_chip *fpc,
+ enum fsl_pwm_clk index)
+{
+ unsigned long sys_rate, cnt_rate;
+ unsigned long long ratio;
+
+ sys_rate = clk_get_rate(fpc->clk[FSL_PWM_CLK_SYS]);
+ if (!sys_rate)
+ return -EINVAL;
+
+ cnt_rate = clk_get_rate(fpc->clk[fpc->cnt_select]);
+ if (!cnt_rate)
+ return -EINVAL;
+
+ switch (index) {
+ case FSL_PWM_CLK_SYS:
+ fpc->clk_ps = 1;
+ break;
+ case FSL_PWM_CLK_FIX:
+ ratio = 2 * cnt_rate - 1;
+ do_div(ratio, sys_rate);
+ fpc->clk_ps = ratio;
+ break;
+ case FSL_PWM_CLK_EXT:
+ ratio = 4 * cnt_rate - 1;
+ do_div(ratio, sys_rate);
+ fpc->clk_ps = ratio;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static unsigned long fsl_pwm_calculate_cycles(struct fsl_pwm_chip *fpc,
+ unsigned long period_ns)
+{
+ unsigned long long c, c0;
+
+ c = clk_get_rate(fpc->clk[fpc->cnt_select]);
+ c = c * period_ns;
+ do_div(c, 1000000000UL);
+
+ do {
+ c0 = c;
+ do_div(c0, (1 << fpc->clk_ps));
+ if (c0 <= 0xFFFF)
+ return (unsigned long)c0;
+ } while (++fpc->clk_ps < 8);
+
+ return 0;
+}
+
+static unsigned long fsl_pwm_calculate_period_cycles(struct fsl_pwm_chip *fpc,
+ unsigned long period_ns,
+ enum fsl_pwm_clk index)
+{
+ int ret;
+
+ ret = fsl_pwm_calculate_default_ps(fpc, index);
+ if (ret) {
+ dev_err(fpc->chip.dev,
+ "failed to calculate default prescaler: %d\n",
+ ret);
+ return 0;
+ }
+
+ return fsl_pwm_calculate_cycles(fpc, period_ns);
+}
+
+static unsigned long fsl_pwm_calculate_period(struct fsl_pwm_chip *fpc,
+ unsigned long period_ns)
+{
+ enum fsl_pwm_clk m0, m1;
+ unsigned long fix_rate, ext_rate, cycles;
+
+ cycles = fsl_pwm_calculate_period_cycles(fpc, period_ns,
+ FSL_PWM_CLK_SYS);
+ if (cycles) {
+ fpc->cnt_select = FSL_PWM_CLK_SYS;
+ return cycles;
+ }
+
+ fix_rate = clk_get_rate(fpc->clk[FSL_PWM_CLK_FIX]);
+ ext_rate = clk_get_rate(fpc->clk[FSL_PWM_CLK_EXT]);
+
+ if (fix_rate > ext_rate) {
+ m0 = FSL_PWM_CLK_FIX;
+ m1 = FSL_PWM_CLK_EXT;
+ } else {
+ m0 = FSL_PWM_CLK_EXT;
+ m1 = FSL_PWM_CLK_FIX;
+ }
+
+ cycles = fsl_pwm_calculate_period_cycles(fpc, period_ns, m0);
+ if (cycles) {
+ fpc->cnt_select = m0;
+ return cycles;
+ }
+
+ fpc->cnt_select = m1;
+
+ return fsl_pwm_calculate_period_cycles(fpc, period_ns, m1);
+}
+
+static unsigned long fsl_pwm_calculate_duty(struct fsl_pwm_chip *fpc,
+ unsigned long period_ns,
+ unsigned long duty_ns)
+{
+ unsigned long long val, duty;
+
+ val = readl(fpc->base + FTM_MOD);
+ duty = duty_ns * (val + 1);
+ do_div(duty, period_ns);
+
+ return (unsigned long)duty;
+}
+
+static int fsl_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct fsl_pwm_chip *fpc = to_fsl_chip(chip);
+ u32 val, period, duty;
+
+ mutex_lock(&fpc->lock);
+
+ /*
+ * The Freescale FTM controller supports only a single period for
+ * all PWM channels, therefore incompatible changes need to be
+ * refused.
+ */
+ if (fpc->period_ns && fpc->period_ns != period_ns) {
+ dev_err(fpc->chip.dev,
+ "conflicting period requested for PWM %u\n",
+ pwm->hwpwm);
+ mutex_unlock(&fpc->lock);
+ return -EBUSY;
+ }
+
+ if (!fpc->period_ns && duty_ns) {
+ period = fsl_pwm_calculate_period(fpc, period_ns);
+ if (!period) {
+ dev_err(fpc->chip.dev, "failed to calculate period\n");
+ mutex_unlock(&fpc->lock);
+ return -EINVAL;
+ }
+
+ val = readl(fpc->base + FTM_SC);
+ val &= ~(FTM_SC_PS_MASK << FTM_SC_PS_SHIFT);
+ val |= fpc->clk_ps;
+ writel(val, fpc->base + FTM_SC);
+ writel(period - 1, fpc->base + FTM_MOD);
+
+ fpc->period_ns = period_ns;
+ }
+
+ mutex_unlock(&fpc->lock);
+
+ duty = fsl_pwm_calculate_duty(fpc, period_ns, duty_ns);
+
+ writel(FTM_CSC_MSB | FTM_CSC_ELSB, fpc->base + FTM_CSC(pwm->hwpwm));
+ writel(duty, fpc->base + FTM_CV(pwm->hwpwm));
+
+ return 0;
+}
+
+static int fsl_pwm_set_polarity(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ enum pwm_polarity polarity)
+{
+ struct fsl_pwm_chip *fpc = to_fsl_chip(chip);
+ u32 val;
+
+ val = readl(fpc->base + FTM_POL);
+
+ if (polarity == PWM_POLARITY_INVERSED)
+ val |= BIT(pwm->hwpwm);
+ else
+ val &= ~BIT(pwm->hwpwm);
+
+ writel(val, fpc->base + FTM_POL);
+
+ return 0;
+}
+
+static int fsl_counter_clock_enable(struct fsl_pwm_chip *fpc)
+{
+ u32 val;
+ int ret;
+
+ if (fpc->use_count != 0)
+ return 0;
+
+ /* select counter clock source */
+ val = readl(fpc->base + FTM_SC);
+ val &= ~(FTM_SC_CLK_MASK << FTM_SC_CLK_SHIFT);
+ val |= FTM_SC_CLK(fpc->cnt_select);
+ writel(val, fpc->base + FTM_SC);
+
+ ret = clk_prepare_enable(fpc->clk[fpc->cnt_select]);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(fpc->clk[FSL_PWM_CLK_CNTEN]);
+ if (ret) {
+ clk_disable_unprepare(fpc->clk[fpc->cnt_select]);
+ return ret;
+ }
+
+ fpc->use_count++;
+
+ return 0;
+}
+
+static int fsl_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct fsl_pwm_chip *fpc = to_fsl_chip(chip);
+ u32 val;
+ int ret;
+
+ mutex_lock(&fpc->lock);
+ val = readl(fpc->base + FTM_OUTMASK);
+ val &= ~BIT(pwm->hwpwm);
+ writel(val, fpc->base + FTM_OUTMASK);
+
+ ret = fsl_counter_clock_enable(fpc);
+ mutex_unlock(&fpc->lock);
+
+ return ret;
+}
+
+static void fsl_counter_clock_disable(struct fsl_pwm_chip *fpc)
+{
+ u32 val;
+
+ /*
+ * already disabled, do nothing
+ */
+ if (fpc->use_count == 0)
+ return;
+
+ /* there are still users, so can't disable yet */
+ if (--fpc->use_count > 0)
+ return;
+
+ /* no users left, disable PWM counter clock */
+ val = readl(fpc->base + FTM_SC);
+ val &= ~(FTM_SC_CLK_MASK << FTM_SC_CLK_SHIFT);
+ writel(val, fpc->base + FTM_SC);
+
+ clk_disable_unprepare(fpc->clk[FSL_PWM_CLK_CNTEN]);
+ clk_disable_unprepare(fpc->clk[fpc->cnt_select]);
+}
+
+static void fsl_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct fsl_pwm_chip *fpc = to_fsl_chip(chip);
+ u32 val;
+
+ mutex_lock(&fpc->lock);
+ val = readl(fpc->base + FTM_OUTMASK);
+ val |= BIT(pwm->hwpwm);
+ writel(val, fpc->base + FTM_OUTMASK);
+
+ fsl_counter_clock_disable(fpc);
+
+ val = readl(fpc->base + FTM_OUTMASK);
+
+ if ((val & 0xFF) == 0xFF)
+ fpc->period_ns = 0;
+
+ mutex_unlock(&fpc->lock);
+}
+
+static const struct pwm_ops fsl_pwm_ops = {
+ .request = fsl_pwm_request,
+ .free = fsl_pwm_free,
+ .config = fsl_pwm_config,
+ .set_polarity = fsl_pwm_set_polarity,
+ .enable = fsl_pwm_enable,
+ .disable = fsl_pwm_disable,
+ .owner = THIS_MODULE,
+};
+
+static int fsl_pwm_init(struct fsl_pwm_chip *fpc)
+{
+ int ret;
+
+ ret = clk_prepare_enable(fpc->clk[FSL_PWM_CLK_SYS]);
+ if (ret)
+ return ret;
+
+ writel(0x00, fpc->base + FTM_CNTIN);
+ writel(0x00, fpc->base + FTM_OUTINIT);
+ writel(0xFF, fpc->base + FTM_OUTMASK);
+
+ clk_disable_unprepare(fpc->clk[FSL_PWM_CLK_SYS]);
+
+ return 0;
+}
+
+static int fsl_pwm_probe(struct platform_device *pdev)
+{
+ struct fsl_pwm_chip *fpc;
+ struct resource *res;
+ int ret;
+
+ fpc = devm_kzalloc(&pdev->dev, sizeof(*fpc), GFP_KERNEL);
+ if (!fpc)
+ return -ENOMEM;
+
+ mutex_init(&fpc->lock);
+
+ fpc->chip.dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ fpc->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(fpc->base))
+ return PTR_ERR(fpc->base);
+
+ fpc->clk[FSL_PWM_CLK_SYS] = devm_clk_get(&pdev->dev, "ftm_sys");
+ if (IS_ERR(fpc->clk[FSL_PWM_CLK_SYS])) {
+ dev_err(&pdev->dev, "failed to get \"ftm_sys\" clock\n");
+ return PTR_ERR(fpc->clk[FSL_PWM_CLK_SYS]);
+ }
+
+ fpc->clk[FSL_PWM_CLK_FIX] = devm_clk_get(fpc->chip.dev, "ftm_fix");
+ if (IS_ERR(fpc->clk[FSL_PWM_CLK_FIX]))
+ return PTR_ERR(fpc->clk[FSL_PWM_CLK_FIX]);
+
+ fpc->clk[FSL_PWM_CLK_EXT] = devm_clk_get(fpc->chip.dev, "ftm_ext");
+ if (IS_ERR(fpc->clk[FSL_PWM_CLK_EXT]))
+ return PTR_ERR(fpc->clk[FSL_PWM_CLK_EXT]);
+
+ fpc->clk[FSL_PWM_CLK_CNTEN] =
+ devm_clk_get(fpc->chip.dev, "ftm_cnt_clk_en");
+ if (IS_ERR(fpc->clk[FSL_PWM_CLK_CNTEN]))
+ return PTR_ERR(fpc->clk[FSL_PWM_CLK_CNTEN]);
+
+ fpc->chip.ops = &fsl_pwm_ops;
+ fpc->chip.of_xlate = of_pwm_xlate_with_flags;
+ fpc->chip.of_pwm_n_cells = 3;
+ fpc->chip.base = -1;
+ fpc->chip.npwm = 8;
+
+ ret = pwmchip_add(&fpc->chip);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, fpc);
+
+ return fsl_pwm_init(fpc);
+}
+
+static int fsl_pwm_remove(struct platform_device *pdev)
+{
+ struct fsl_pwm_chip *fpc = platform_get_drvdata(pdev);
+
+ return pwmchip_remove(&fpc->chip);
+}
+
+static const struct of_device_id fsl_pwm_dt_ids[] = {
+ { .compatible = "fsl,vf610-ftm-pwm", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, fsl_pwm_dt_ids);
+
+static struct platform_driver fsl_pwm_driver = {
+ .driver = {
+ .name = "fsl-ftm-pwm",
+ .of_match_table = fsl_pwm_dt_ids,
+ },
+ .probe = fsl_pwm_probe,
+ .remove = fsl_pwm_remove,
+};
+module_platform_driver(fsl_pwm_driver);
+
+MODULE_DESCRIPTION("Freescale FlexTimer Module PWM Driver");
+MODULE_AUTHOR("Xiubo Li <Li.Xiubo@freescale.com>");
+MODULE_ALIAS("platform:fsl-ftm-pwm");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-lpss.c b/drivers/pwm/pwm-lpss.c
new file mode 100644
index 0000000..449e372
--- /dev/null
+++ b/drivers/pwm/pwm-lpss.c
@@ -0,0 +1,183 @@
+/*
+ * Intel Low Power Subsystem PWM controller driver
+ *
+ * Copyright (C) 2014, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ * Author: Chew Kean Ho <kean.ho.chew@intel.com>
+ * Author: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
+ * Author: Chew Chiau Ee <chiau.ee.chew@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pwm.h>
+#include <linux/platform_device.h>
+
+#define PWM 0x00000000
+#define PWM_ENABLE BIT(31)
+#define PWM_SW_UPDATE BIT(30)
+#define PWM_BASE_UNIT_SHIFT 8
+#define PWM_BASE_UNIT_MASK 0x00ffff00
+#define PWM_ON_TIME_DIV_MASK 0x000000ff
+#define PWM_DIVISION_CORRECTION 0x2
+#define PWM_LIMIT (0x8000 + PWM_DIVISION_CORRECTION)
+#define NSECS_PER_SEC 1000000000UL
+
+struct pwm_lpss_chip {
+ struct pwm_chip chip;
+ void __iomem *regs;
+ struct clk *clk;
+};
+
+static inline struct pwm_lpss_chip *to_lpwm(struct pwm_chip *chip)
+{
+ return container_of(chip, struct pwm_lpss_chip, chip);
+}
+
+static int pwm_lpss_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct pwm_lpss_chip *lpwm = to_lpwm(chip);
+ u8 on_time_div;
+ unsigned long c;
+ unsigned long long base_unit, freq = NSECS_PER_SEC;
+ u32 ctrl;
+
+ do_div(freq, period_ns);
+
+ /* The equation is: base_unit = ((freq / c) * 65536) + correction */
+ base_unit = freq * 65536;
+
+ c = clk_get_rate(lpwm->clk);
+ if (!c)
+ return -EINVAL;
+
+ do_div(base_unit, c);
+ base_unit += PWM_DIVISION_CORRECTION;
+ if (base_unit > PWM_LIMIT)
+ return -EINVAL;
+
+ if (duty_ns <= 0)
+ duty_ns = 1;
+ on_time_div = 255 - (255 * duty_ns / period_ns);
+
+ ctrl = readl(lpwm->regs + PWM);
+ ctrl &= ~(PWM_BASE_UNIT_MASK | PWM_ON_TIME_DIV_MASK);
+ ctrl |= (u16) base_unit << PWM_BASE_UNIT_SHIFT;
+ ctrl |= on_time_div;
+ /* request PWM to update on next cycle */
+ ctrl |= PWM_SW_UPDATE;
+ writel(ctrl, lpwm->regs + PWM);
+
+ return 0;
+}
+
+static int pwm_lpss_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct pwm_lpss_chip *lpwm = to_lpwm(chip);
+ u32 ctrl;
+ int ret;
+
+ ret = clk_prepare_enable(lpwm->clk);
+ if (ret)
+ return ret;
+
+ ctrl = readl(lpwm->regs + PWM);
+ writel(ctrl | PWM_ENABLE, lpwm->regs + PWM);
+
+ return 0;
+}
+
+static void pwm_lpss_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct pwm_lpss_chip *lpwm = to_lpwm(chip);
+ u32 ctrl;
+
+ ctrl = readl(lpwm->regs + PWM);
+ writel(ctrl & ~PWM_ENABLE, lpwm->regs + PWM);
+
+ clk_disable_unprepare(lpwm->clk);
+}
+
+static const struct pwm_ops pwm_lpss_ops = {
+ .config = pwm_lpss_config,
+ .enable = pwm_lpss_enable,
+ .disable = pwm_lpss_disable,
+ .owner = THIS_MODULE,
+};
+
+static const struct acpi_device_id pwm_lpss_acpi_match[] = {
+ { "80860F09", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, pwm_lpss_acpi_match);
+
+static int pwm_lpss_probe(struct platform_device *pdev)
+{
+ struct pwm_lpss_chip *lpwm;
+ struct resource *r;
+ int ret;
+
+ lpwm = devm_kzalloc(&pdev->dev, sizeof(*lpwm), GFP_KERNEL);
+ if (!lpwm)
+ return -ENOMEM;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ lpwm->regs = devm_ioremap_resource(&pdev->dev, r);
+ if (IS_ERR(lpwm->regs))
+ return PTR_ERR(lpwm->regs);
+
+ lpwm->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(lpwm->clk)) {
+ dev_err(&pdev->dev, "failed to get PWM clock\n");
+ return PTR_ERR(lpwm->clk);
+ }
+
+ lpwm->chip.dev = &pdev->dev;
+ lpwm->chip.ops = &pwm_lpss_ops;
+ lpwm->chip.base = -1;
+ lpwm->chip.npwm = 1;
+
+ ret = pwmchip_add(&lpwm->chip);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, lpwm);
+ return 0;
+}
+
+static int pwm_lpss_remove(struct platform_device *pdev)
+{
+ struct pwm_lpss_chip *lpwm = platform_get_drvdata(pdev);
+ u32 ctrl;
+
+ ctrl = readl(lpwm->regs + PWM);
+ writel(ctrl & ~PWM_ENABLE, lpwm->regs + PWM);
+
+ return pwmchip_remove(&lpwm->chip);
+}
+
+static struct platform_driver pwm_lpss_driver = {
+ .driver = {
+ .name = "pwm-lpss",
+ .acpi_match_table = pwm_lpss_acpi_match,
+ },
+ .probe = pwm_lpss_probe,
+ .remove = pwm_lpss_remove,
+};
+module_platform_driver(pwm_lpss_driver);
+
+MODULE_DESCRIPTION("PWM driver for Intel LPSS");
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:pwm-lpss");
diff --git a/drivers/pwm/pwm-pxa.c b/drivers/pwm/pwm-pxa.c
index 8d99573..cd356d8 100644
--- a/drivers/pwm/pwm-pxa.c
+++ b/drivers/pwm/pwm-pxa.c
@@ -127,12 +127,12 @@
#ifdef CONFIG_OF
/*
- * Device tree users must create one device instance for each pwm channel.
+ * Device tree users must create one device instance for each PWM channel.
* Hence we dispense with the HAS_SECONDARY_PWM and "tell" the original driver
* code that this is a single channel pxa25x-pwm. Currently all devices are
* supported identically.
*/
-static struct of_device_id pwm_of_match[] = {
+static const struct of_device_id pwm_of_match[] = {
{ .compatible = "marvell,pxa250-pwm", .data = &pwm_id_table[0]},
{ .compatible = "marvell,pxa270-pwm", .data = &pwm_id_table[0]},
{ .compatible = "marvell,pxa168-pwm", .data = &pwm_id_table[0]},
diff --git a/drivers/pwm/pwm-samsung.c b/drivers/pwm/pwm-samsung.c
index b59639e..d66529a 100644
--- a/drivers/pwm/pwm-samsung.c
+++ b/drivers/pwm/pwm-samsung.c
@@ -598,9 +598,8 @@
}
#endif
-static const struct dev_pm_ops pwm_samsung_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(pwm_samsung_suspend, pwm_samsung_resume)
-};
+static SIMPLE_DEV_PM_OPS(pwm_samsung_pm_ops, pwm_samsung_suspend,
+ pwm_samsung_resume);
static struct platform_driver pwm_samsung_driver = {
.driver = {
diff --git a/include/linux/pwm.h b/include/linux/pwm.h
index f0feafd..4717f54 100644
--- a/include/linux/pwm.h
+++ b/include/linux/pwm.h
@@ -7,7 +7,7 @@
struct pwm_device;
struct seq_file;
-#if IS_ENABLED(CONFIG_PWM) || IS_ENABLED(CONFIG_HAVE_PWM)
+#if IS_ENABLED(CONFIG_PWM)
/*
* pwm_request - request a PWM device
*/
