tree: a7653403313fd4048e0f2c728991cae57772b7c2 [path history] [tgz]
  1. arch/
  2. block/
  3. certs/
  4. crypto/
  5. Documentation/
  6. drivers/
  7. fs/
  8. include/
  9. init/
  10. ipc/
  11. kernel/
  12. lib/
  13. LICENSES/
  14. mm/
  15. net/
  16. samples/
  17. scripts/
  18. security/
  19. sound/
  20. tools/
  21. usr/
  22. virt/
  23. .clang-format
  24. .cocciconfig
  25. .get_maintainer.ignore
  26. .gitattributes
  27. .gitignore
  28. .mailmap
  29. 0001-sunxi-h3-Fix-PLL1-setup-to-never-use-dividers.patch
  30. COPYING
  31. CREDITS
  32. Kbuild
  33. Kconfig
  34. MAINTAINERS
  35. Makefile
  36. README
  37. README.md
README.md

Mainline linux kernel for Orange Pi PC/PC2/PC3/One, TBS A711, PinePhone, PocketBook Touch Lux 3

This kernel tree is meant for:

  • Orange Pi One
  • Orange Pi PC
  • Orange Pi PC 2
  • Orange Pi 3
  • PinePhone 1.0, 1.1 and 1.2(a)
  • TBS A711 Tablet
  • PocketBook Touch Lux 3
  • Pinebook Pro

Features in addition to mainline:

  • [Orange Pi One/PC/PC2] Thermal regulation/CPU DVFS (if CPU heats above certain temperature, it will try to cool itself down by reducing CPU frequency)
  • [All] Mark one of DRM planes as a cursor plane, speeding up Xorg based desktop with modesetting driver
  • [Orange Pi One/PC/PC2] Configure on-board micro-switches to perform system power off function
  • [Orange Pi 3] Ethernet, HDMI audio
  • [TBS A711] HM5065 (back camera), Touch screen, ...
  • [PinePhone] WiFi, Bluetooth, Audio, Modem power, HDMI out over USB-C, USB-C support, cameras, PMIC improvements, fixes here and there
  • [PocketBook Touch Lux 3] Display and Touchscreen support

Pre-built u-boot and kernels are available at https://xff.cz/kernels/

You may need some firmware files for some part of the functionality. Those are available at: https://megous.com/git/linux-firmware

You may want to configure CONFIG_EXTRA_FIRMWARE and CONFIG_EXTRA_FIRMWARE_DIR to your liking. Default is to build the firmware files into the kernel.

You can use this kernel to run a desktop environment on Orange Pi SBCs, Arch Linux on your Pinephone, or to have a completely opensource OS on a Pocketbook e-ink book reader.

Have fun!

Build instructions

These are rudimentary instructions and you need to understand what you're doing. These are just core steps required to build the ATF/u-boot/kernel. Downloading, verifying, renaming to correct directories is not described or mentioned. You should be able to infer missing necessary steps yourself for your particular needs.

Get necessary toolchains from:

Extract toolchains and prepare the environment:

CWD=`pwd`
OUT=$CWD/builds
SRC=$CWD/u-boot
export PATH="$PATH:$CWD/Toolchains/arm/bin:$CWD/Toolchains/aarch64/bin"

For Orange Pi PC2, Orange Pi 3 or PinePhone:

export CROSS_COMPILE=aarch64-linux-gnu-
export KBUILD_OUTPUT=$OUT/.tmp/uboot-pc2
rm -rf "$KBUILD_OUTPUT"
mkdir -p $KBUILD_OUTPUT $OUT/pc2

Get and build ATF from https://github.com/ARM-software/arm-trusted-firmware:

make -C "$CWD/arm-trusted-firmware" PLAT=sun50i_a64 DEBUG=1 bl31
cp "$CWD/arm-trusted-firmware/build/sun50i_a64/debug/bl31.bin" "$KBUILD_OUTPUT"

Use sun50i_a64 for Orange Pi PC2 or PinePhone and sun50i_h6 for Orange Pi 3.

Build u-boot from https://megous.com/git/u-boot/ (opi-v2020.04 branch) with appropriate defconfig (orangepi_one_defconfig, orangepi_pc2_defconfig, orangepi_pc_defconfig, orangepi_3_defconfig, tbs_a711_defconfig, pinephone_defconfig).

My u-boot branch already has all the necessary patches integrated and is configured for quick u-boot/kernel startup.

make -C u-boot orangepi_pc2_defconfig
make -C u-boot -j5

cp $KBUILD_OUTPUT/.config $OUT/pc2/uboot.config
cat $KBUILD_OUTPUT/{spl/sunxi-spl.bin,u-boot.itb} > $OUT/pc2/uboot.bin

Get kernel from this repository and checkout the latest orange-pi-5.8 branch.

Build the kernel for 64-bit boards:

export ARCH=arm64
export CROSS_COMPILE=aarch64-linux-gnu-
export KBUILD_OUTPUT=$OUT/.tmp/linux-arm64
mkdir -p $KBUILD_OUTPUT $OUT/pc2

make -C linux orangepi_defconfig
# or make -C linux pocketbook_touch_lux_3_defconfig
# or make -C linux tbs_a711_defconfig
make -C linux -j5 clean
make -C linux -j5 Image dtbs

cp -f $KBUILD_OUTPUT/arch/arm64/boot/Image $OUT/pc2/
cp -f $KBUILD_OUTPUT/.config $OUT/pc2/linux.config
cp -f $KBUILD_OUTPUT/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dtb $OUT/pc2/board.dtb

Build the kernel for 32-bit boards:

export ARCH=arm
export CROSS_COMPILE=arm-linux-gnueabihf-
export KBUILD_OUTPUT=$OUT/.tmp/linux-arm
mkdir -p $KBUILD_OUTPUT $OUT/pc

make orangepi_defconfig
# or make pinephone_defconfig
make -C linux orangepi_defconfig
make -C linux -j5 clean
make -C linux -j5 zImage dtbs

cp -f $KBUILD_OUTPUT/arch/arm/boot/zImage $OUT/pc/
cp -f $KBUILD_OUTPUT/.config $OUT/pc/linux.config
cp -f $KBUILD_OUTPUT/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dtb $OUT/pc/board.dtb
# Or use sun8i-h3-orangepi-one.dtb for Orange Pi One

PinePhone

I don‘t run u-boot on PinePhone, so my pre-built kernel packages don’t come with u-boot built for PinePhone.

Kernel lockup issues

If you‘re getting lockups on boot or later during thermal regulation, you’re missing an u-boot patch.

This patch is necessary to run this kernel!

These lockups are caused by improper NKMP clock factors selection in u-boot for PLL_CPUX. (M divider should not be used. P divider should be used only for frequencies below 240MHz.)

This patch for u-boot fixes it:

0001-sunxi-h3-Fix-PLL1-setup-to-never-use-dividers.patch

Kernel side is already fixed in this kernel tree.