# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/ams,as3711.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Austria MicroSystems AS3711 Quad Buck High Current PMIC with Charger

maintainers:
  - Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>

description:
  AS3711 is an I2C PMIC from Austria MicroSystems with multiple DC/DC and LDO
  power supplies, a battery charger and an RTC.  So far only bindings for the
  two step-up DC/DC converters are defined.

properties:
  compatible:
    const: ams,as3711

  reg:
    maxItems: 1

  backlight:
    description:
      Step-up converter configuration, to be used as a backlight source
    type: object
    additionalProperties: false
    properties:
      compatible:
        const: ams,as3711-bl

      su1-dev:
        description: Framebuffer phandle for the first step-up converter
        $ref: /schemas/types.yaml#/definitions/phandle

      su1-max-uA:
        description: Maximum current for the first step-up converter
        $ref: /schemas/types.yaml#/definitions/uint32

      su2-dev:
        description: Framebuffer phandle for the second step-up converter
        $ref: /schemas/types.yaml#/definitions/phandle

      su2-max-uA:
        description: Maximum current for the second step-up converter
        $ref: /schemas/types.yaml#/definitions/uint32

      su2-feedback-voltage:
        description: Second step-up converter uses voltage feedback
        type: boolean

      su2-feedback-curr1:
        description:
          Second step-up converter uses CURR1 input for current feedback
        type: boolean

      su2-feedback-curr2:
        description:
          Second step-up converter uses CURR2 input for current feedback
        type: boolean

      su2-feedback-curr3:
        description:
          Second step-up converter uses CURR3 input for current feedback
        type: boolean

      su2-feedback-curr-auto:
        description:
          Second step-up converter uses automatic current feedback selection
        type: boolean

      su2-fbprot-lx-sd4:
        description:
          Second step-up converter uses LX_SD4 for over-voltage protection
        type: boolean

      su2-fbprot-gpio2:
        description:
          Second step-up converter uses GPIO2 for over-voltage protection
        type: boolean

      su2-fbprot-gpio3:
        description:
          Second step-up converter uses GPIO3 for over-voltage protection
        type: boolean

      su2-fbprot-gpio4:
        description:
          Second step-up converter uses GPIO4 for over-voltage protection
        type: boolean

      su2-auto-curr1:
        description:
          Second step-up converter uses CURR1 input for automatic current
          feedback
        type: boolean

      su2-auto-curr2:
        description:
          Second step-up converter uses CURR2 input for automatic current
          feedback
        type: boolean

      su2-auto-curr3:
        description:
          Second step-up converter uses CURR3 input for automatic current
          feedback
        type: boolean

    required:
      - compatible

    dependentRequired:
      # To use the SU1 converter as a backlight source the following two
      # properties must be provided:
      su1-dev: [ su1-max-uA ]
      su1-max-uA: [ su1-dev ]

      # To use the SU2 converter as a backlight source the following two
      # properties must be provided:
      su2-dev: [ su2-max-uA ]
      su2-max-uA: [ su2-dev ]

      su2-feedback-voltage: [ su2-dev ]
      su2-feedback-curr1: [ su2-dev ]
      su2-feedback-curr2: [ su2-dev ]
      su2-feedback-curr3: [ su2-dev ]
      su2-feedback-curr-auto: [ su2-dev ]
      su2-fbprot-lx-sd4: [ su2-dev ]
      su2-fbprot-gpio2: [ su2-dev ]
      su2-fbprot-gpio3: [ su2-dev ]
      su2-fbprot-gpio4: [ su2-dev ]
      su2-auto-curr1: [ su2-feedback-curr-auto ]
      su2-auto-curr2: [ su2-feedback-curr-auto ]
      su2-auto-curr3: [ su2-feedback-curr-auto ]

    dependentSchemas:
      su2-dev:
        allOf:
          - oneOf:
              - required:
                  - su2-feedback-voltage
              - required:
                  - su2-feedback-curr1
              - required:
                  - su2-feedback-curr2
              - required:
                  - su2-feedback-curr3
              - required:
                  - su2-feedback-curr-auto
          - oneOf:
              - required:
                  - su2-fbprot-lx-sd4
              - required:
                  - su2-fbprot-gpio2
              - required:
                  - su2-fbprot-gpio3
              - required:
                  - su2-fbprot-gpio4

      su2-feedback-curr-auto:
        anyOf:
          - required:
              - su2-auto-curr1
          - required:
              - su2-auto-curr2
          - required:
              - su2-auto-curr3

  regulators:
    description: Other DC/DC and LDO supplies
    type: object
    unevaluatedProperties: false
    patternProperties:
      "^(sd[1-4]|ldo[1-8])$":
        type: object
        $ref: /schemas/regulator/regulator.yaml#
        unevaluatedProperties: false

required:
  - compatible
  - reg

additionalProperties: false

examples:
  - |
    i2c {
        #address-cells = <1>;
        #size-cells = <0>;

        pmic@40 {
            compatible = "ams,as3711";
            reg = <0x40>;

            regulators {
                sd4 {
                    regulator-name = "1.215V";
                    regulator-min-microvolt = <1215000>;
                    regulator-max-microvolt = <1235000>;
                };
                ldo2 {
                    regulator-name = "2.8V CPU";
                    regulator-min-microvolt = <2800000>;
                    regulator-max-microvolt = <2800000>;
                    regulator-always-on;
                    regulator-boot-on;
                };
            };

            backlight {
                compatible = "ams,as3711-bl";
                su2-dev = <&lcdc>;
                su2-max-uA = <36000>;
                su2-feedback-curr-auto;
                su2-fbprot-gpio4;
                su2-auto-curr1;
                su2-auto-curr2;
                su2-auto-curr3;
            };
        };
    };