diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
new file mode 100644
index 0000000..eec43ab
--- /dev/null
+++ b/drivers/hwmon/w83791d.c
@@ -0,0 +1,1255 @@
+/*
+    w83791d.c - Part of lm_sensors, Linux kernel modules for hardware
+                monitoring
+
+    Copyright (C) 2006 Charles Spirakis <bezaur@gmail.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    Supports following chips:
+
+    Chip	#vin	#fanin	#pwm	#temp	wchipid	vendid	i2c	ISA
+    w83791d	10	5	3	3	0x71	0x5ca3	yes	no
+
+    The w83791d chip appears to be part way between the 83781d and the
+    83792d. Thus, this file is derived from both the w83792d.c and
+    w83781d.c files, but its output is more along the lines of the
+    83781d (which means there are no changes to the user-mode sensors
+    program which treats the 83791d as an 83781d).
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+
+#define NUMBER_OF_VIN		10
+#define NUMBER_OF_FANIN		5
+#define NUMBER_OF_TEMPIN	3
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(w83791d);
+I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
+			"{bus, clientaddr, subclientaddr1, subclientaddr2}");
+
+static int reset;
+module_param(reset, bool, 0);
+MODULE_PARM_DESC(reset, "Set to one to force a hardware chip reset");
+
+static int init;
+module_param(init, bool, 0);
+MODULE_PARM_DESC(init, "Set to one to force extra software initialization");
+
+/* The W83791D registers */
+static const u8 W83791D_REG_IN[NUMBER_OF_VIN] = {
+	0x20,			/* VCOREA in DataSheet */
+	0x21,			/* VINR0 in DataSheet */
+	0x22,			/* +3.3VIN in DataSheet */
+	0x23,			/* VDD5V in DataSheet */
+	0x24,			/* +12VIN in DataSheet */
+	0x25,			/* -12VIN in DataSheet */
+	0x26,			/* -5VIN in DataSheet */
+	0xB0,			/* 5VSB in DataSheet */
+	0xB1,			/* VBAT in DataSheet */
+	0xB2			/* VINR1 in DataSheet */
+};
+
+static const u8 W83791D_REG_IN_MAX[NUMBER_OF_VIN] = {
+	0x2B,			/* VCOREA High Limit in DataSheet */
+	0x2D,			/* VINR0 High Limit in DataSheet */
+	0x2F,			/* +3.3VIN High Limit in DataSheet */
+	0x31,			/* VDD5V High Limit in DataSheet */
+	0x33,			/* +12VIN High Limit in DataSheet */
+	0x35,			/* -12VIN High Limit in DataSheet */
+	0x37,			/* -5VIN High Limit in DataSheet */
+	0xB4,			/* 5VSB High Limit in DataSheet */
+	0xB6,			/* VBAT High Limit in DataSheet */
+	0xB8			/* VINR1 High Limit in DataSheet */
+};
+static const u8 W83791D_REG_IN_MIN[NUMBER_OF_VIN] = {
+	0x2C,			/* VCOREA Low Limit in DataSheet */
+	0x2E,			/* VINR0 Low Limit in DataSheet */
+	0x30,			/* +3.3VIN Low Limit in DataSheet */
+	0x32,			/* VDD5V Low Limit in DataSheet */
+	0x34,			/* +12VIN Low Limit in DataSheet */
+	0x36,			/* -12VIN Low Limit in DataSheet */
+	0x38,			/* -5VIN Low Limit in DataSheet */
+	0xB5,			/* 5VSB Low Limit in DataSheet */
+	0xB7,			/* VBAT Low Limit in DataSheet */
+	0xB9			/* VINR1 Low Limit in DataSheet */
+};
+static const u8 W83791D_REG_FAN[NUMBER_OF_FANIN] = {
+	0x28,			/* FAN 1 Count in DataSheet */
+	0x29,			/* FAN 2 Count in DataSheet */
+	0x2A,			/* FAN 3 Count in DataSheet */
+	0xBA,			/* FAN 4 Count in DataSheet */
+	0xBB,			/* FAN 5 Count in DataSheet */
+};
+static const u8 W83791D_REG_FAN_MIN[NUMBER_OF_FANIN] = {
+	0x3B,			/* FAN 1 Count Low Limit in DataSheet */
+	0x3C,			/* FAN 2 Count Low Limit in DataSheet */
+	0x3D,			/* FAN 3 Count Low Limit in DataSheet */
+	0xBC,			/* FAN 4 Count Low Limit in DataSheet */
+	0xBD,			/* FAN 5 Count Low Limit in DataSheet */
+};
+
+static const u8 W83791D_REG_FAN_CFG[2] = {
+	0x84,			/* FAN 1/2 configuration */
+	0x95,			/* FAN 3 configuration */
+};
+
+static const u8 W83791D_REG_FAN_DIV[3] = {
+	0x47,			/* contains FAN1 and FAN2 Divisor */
+	0x4b,			/* contains FAN3 Divisor */
+	0x5C,			/* contains FAN4 and FAN5 Divisor */
+};
+
+#define W83791D_REG_BANK		0x4E
+#define W83791D_REG_TEMP2_CONFIG	0xC2
+#define W83791D_REG_TEMP3_CONFIG	0xCA
+
+static const u8 W83791D_REG_TEMP1[3] = {
+	0x27,			/* TEMP 1 in DataSheet */
+	0x39,			/* TEMP 1 Over in DataSheet */
+	0x3A,			/* TEMP 1 Hyst in DataSheet */
+};
+
+static const u8 W83791D_REG_TEMP_ADD[2][6] = {
+	{0xC0,			/* TEMP 2 in DataSheet */
+	 0xC1,			/* TEMP 2(0.5 deg) in DataSheet */
+	 0xC5,			/* TEMP 2 Over High part in DataSheet */
+	 0xC6,			/* TEMP 2 Over Low part in DataSheet */
+	 0xC3,			/* TEMP 2 Thyst High part in DataSheet */
+	 0xC4},			/* TEMP 2 Thyst Low part in DataSheet */
+	{0xC8,			/* TEMP 3 in DataSheet */
+	 0xC9,			/* TEMP 3(0.5 deg) in DataSheet */
+	 0xCD,			/* TEMP 3 Over High part in DataSheet */
+	 0xCE,			/* TEMP 3 Over Low part in DataSheet */
+	 0xCB,			/* TEMP 3 Thyst High part in DataSheet */
+	 0xCC}			/* TEMP 3 Thyst Low part in DataSheet */
+};
+
+#define W83791D_REG_BEEP_CONFIG		0x4D
+
+static const u8 W83791D_REG_BEEP_CTRL[3] = {
+	0x56,			/* BEEP Control Register 1 */
+	0x57,			/* BEEP Control Register 2 */
+	0xA3,			/* BEEP Control Register 3 */
+};
+
+#define W83791D_REG_CONFIG		0x40
+#define W83791D_REG_VID_FANDIV		0x47
+#define W83791D_REG_DID_VID4		0x49
+#define W83791D_REG_WCHIPID		0x58
+#define W83791D_REG_CHIPMAN		0x4F
+#define W83791D_REG_PIN			0x4B
+#define W83791D_REG_I2C_SUBADDR		0x4A
+
+#define W83791D_REG_ALARM1 0xA9	/* realtime status register1 */
+#define W83791D_REG_ALARM2 0xAA	/* realtime status register2 */
+#define W83791D_REG_ALARM3 0xAB	/* realtime status register3 */
+
+#define W83791D_REG_VBAT		0x5D
+#define W83791D_REG_I2C_ADDR		0x48
+
+/* The SMBus locks itself. The Winbond W83791D has a bank select register
+   (index 0x4e), but the driver only accesses registers in bank 0. Since
+   we don't switch banks, we don't need any special code to handle
+   locking access between bank switches */
+static inline int w83791d_read(struct i2c_client *client, u8 reg)
+{
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static inline int w83791d_write(struct i2c_client *client, u8 reg, u8 value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+/* The analog voltage inputs have 16mV LSB. Since the sysfs output is
+   in mV as would be measured on the chip input pin, need to just
+   multiply/divide by 16 to translate from/to register values. */
+#define IN_TO_REG(val)		(SENSORS_LIMIT((((val) + 8) / 16), 0, 255))
+#define IN_FROM_REG(val)	((val) * 16)
+
+static u8 fan_to_reg(long rpm, int div)
+{
+	if (rpm == 0)
+		return 255;
+	rpm = SENSORS_LIMIT(rpm, 1, 1000000);
+	return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+}
+
+#define FAN_FROM_REG(val,div)	((val) == 0   ? -1 : \
+				((val) == 255 ? 0 : \
+					1350000 / ((val) * (div))))
+
+/* for temp1 which is 8-bit resolution, LSB = 1 degree Celsius */
+#define TEMP1_FROM_REG(val)	((val) * 1000)
+#define TEMP1_TO_REG(val)	((val) <= -128000 ? -128 : \
+				 (val) >= 127000 ? 127 : \
+				 (val) < 0 ? ((val) - 500) / 1000 : \
+				 ((val) + 500) / 1000)
+
+/* for temp2 and temp3 which are 9-bit resolution, LSB = 0.5 degree Celsius
+   Assumes the top 8 bits are the integral amount and the bottom 8 bits
+   are the fractional amount. Since we only have 0.5 degree resolution,
+   the bottom 7 bits will always be zero */
+#define TEMP23_FROM_REG(val)	((val) / 128 * 500)
+#define TEMP23_TO_REG(val)	((val) <= -128000 ? 0x8000 : \
+				 (val) >= 127500 ? 0x7F80 : \
+				 (val) < 0 ? ((val) - 250) / 500 * 128 : \
+				 ((val) + 250) / 500 * 128)
+
+
+#define BEEP_MASK_TO_REG(val)		((val) & 0xffffff)
+#define BEEP_MASK_FROM_REG(val)		((val) & 0xffffff)
+
+#define DIV_FROM_REG(val)		(1 << (val))
+
+static u8 div_to_reg(int nr, long val)
+{
+	int i;
+	int max;
+
+	/* first three fan's divisor max out at 8, rest max out at 128 */
+	max = (nr < 3) ? 8 : 128;
+	val = SENSORS_LIMIT(val, 1, max) >> 1;
+	for (i = 0; i < 7; i++) {
+		if (val == 0)
+			break;
+		val >>= 1;
+	}
+	return (u8) i;
+}
+
+struct w83791d_data {
+	struct i2c_client client;
+	struct class_device *class_dev;
+	struct mutex update_lock;
+
+	char valid;			/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+
+	/* array of 2 pointers to subclients */
+	struct i2c_client *lm75[2];
+
+	/* volts */
+	u8 in[NUMBER_OF_VIN];		/* Register value */
+	u8 in_max[NUMBER_OF_VIN];	/* Register value */
+	u8 in_min[NUMBER_OF_VIN];	/* Register value */
+
+	/* fans */
+	u8 fan[NUMBER_OF_FANIN];	/* Register value */
+	u8 fan_min[NUMBER_OF_FANIN];	/* Register value */
+	u8 fan_div[NUMBER_OF_FANIN];	/* Register encoding, shifted right */
+
+	/* Temperature sensors */
+
+	s8 temp1[3];		/* current, over, thyst */
+	s16 temp_add[2][3];	/* fixed point value. Top 8 bits are the
+				   integral part, bottom 8 bits are the
+				   fractional part. We only use the top
+				   9 bits as the resolution is only
+				   to the 0.5 degree C...
+				   two sensors with three values
+				   (cur, over, hyst)  */
+
+	/* Misc */
+	u32 alarms;		/* realtime status register encoding,combined */
+	u8 beep_enable;		/* Global beep enable */
+	u32 beep_mask;		/* Mask off specific beeps */
+	u8 vid;			/* Register encoding, combined */
+	u8 vrm;			/* hwmon-vid */
+};
+
+static int w83791d_attach_adapter(struct i2c_adapter *adapter);
+static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind);
+static int w83791d_detach_client(struct i2c_client *client);
+
+static int w83791d_read(struct i2c_client *client, u8 register);
+static int w83791d_write(struct i2c_client *client, u8 register, u8 value);
+static struct w83791d_data *w83791d_update_device(struct device *dev);
+
+#ifdef DEBUG
+static void w83791d_print_debug(struct w83791d_data *data, struct device *dev);
+#endif
+
+static void w83791d_init_client(struct i2c_client *client);
+
+static struct i2c_driver w83791d_driver = {
+	.driver = {
+		.name = "w83791d",
+	},
+	.attach_adapter = w83791d_attach_adapter,
+	.detach_client = w83791d_detach_client,
+};
+
+/* following are the sysfs callback functions */
+#define show_in_reg(reg) \
+static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
+			char *buf) \
+{ \
+	struct sensor_device_attribute *sensor_attr = \
+						to_sensor_dev_attr(attr); \
+	struct w83791d_data *data = w83791d_update_device(dev); \
+	int nr = sensor_attr->index; \
+	return sprintf(buf,"%d\n", IN_FROM_REG(data->reg[nr])); \
+}
+
+show_in_reg(in);
+show_in_reg(in_min);
+show_in_reg(in_max);
+
+#define store_in_reg(REG, reg) \
+static ssize_t store_in_##reg(struct device *dev, \
+				struct device_attribute *attr, \
+				const char *buf, size_t count) \
+{ \
+	struct sensor_device_attribute *sensor_attr = \
+						to_sensor_dev_attr(attr); \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct w83791d_data *data = i2c_get_clientdata(client); \
+	unsigned long val = simple_strtoul(buf, NULL, 10); \
+	int nr = sensor_attr->index; \
+	 \
+	mutex_lock(&data->update_lock); \
+	data->in_##reg[nr] = IN_TO_REG(val); \
+	w83791d_write(client, W83791D_REG_IN_##REG[nr], data->in_##reg[nr]); \
+	mutex_unlock(&data->update_lock); \
+	 \
+	return count; \
+}
+store_in_reg(MIN, min);
+store_in_reg(MAX, max);
+
+static struct sensor_device_attribute sda_in_input[] = {
+	SENSOR_ATTR(in0_input, S_IRUGO, show_in, NULL, 0),
+	SENSOR_ATTR(in1_input, S_IRUGO, show_in, NULL, 1),
+	SENSOR_ATTR(in2_input, S_IRUGO, show_in, NULL, 2),
+	SENSOR_ATTR(in3_input, S_IRUGO, show_in, NULL, 3),
+	SENSOR_ATTR(in4_input, S_IRUGO, show_in, NULL, 4),
+	SENSOR_ATTR(in5_input, S_IRUGO, show_in, NULL, 5),
+	SENSOR_ATTR(in6_input, S_IRUGO, show_in, NULL, 6),
+	SENSOR_ATTR(in7_input, S_IRUGO, show_in, NULL, 7),
+	SENSOR_ATTR(in8_input, S_IRUGO, show_in, NULL, 8),
+	SENSOR_ATTR(in9_input, S_IRUGO, show_in, NULL, 9),
+};
+
+static struct sensor_device_attribute sda_in_min[] = {
+	SENSOR_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 0),
+	SENSOR_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 1),
+	SENSOR_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 2),
+	SENSOR_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 3),
+	SENSOR_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 4),
+	SENSOR_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 5),
+	SENSOR_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 6),
+	SENSOR_ATTR(in7_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 7),
+	SENSOR_ATTR(in8_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 8),
+	SENSOR_ATTR(in9_min, S_IWUSR | S_IRUGO, show_in_min, store_in_min, 9),
+};
+
+static struct sensor_device_attribute sda_in_max[] = {
+	SENSOR_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 0),
+	SENSOR_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 1),
+	SENSOR_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 2),
+	SENSOR_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 3),
+	SENSOR_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 4),
+	SENSOR_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 5),
+	SENSOR_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 6),
+	SENSOR_ATTR(in7_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 7),
+	SENSOR_ATTR(in8_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 8),
+	SENSOR_ATTR(in9_max, S_IWUSR | S_IRUGO, show_in_max, store_in_max, 9),
+};
+
+#define show_fan_reg(reg) \
+static ssize_t show_##reg(struct device *dev, struct device_attribute *attr, \
+				char *buf) \
+{ \
+	struct sensor_device_attribute *sensor_attr = \
+						to_sensor_dev_attr(attr); \
+	struct w83791d_data *data = w83791d_update_device(dev); \
+	int nr = sensor_attr->index; \
+	return sprintf(buf,"%d\n", \
+		FAN_FROM_REG(data->reg[nr], DIV_FROM_REG(data->fan_div[nr]))); \
+}
+
+show_fan_reg(fan);
+show_fan_reg(fan_min);
+
+static ssize_t store_fan_min(struct device *dev, struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83791d_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+	int nr = sensor_attr->index;
+
+	mutex_lock(&data->update_lock);
+	data->fan_min[nr] = fan_to_reg(val, DIV_FROM_REG(data->fan_div[nr]));
+	w83791d_write(client, W83791D_REG_FAN_MIN[nr], data->fan_min[nr]);
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
+				char *buf)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	int nr = sensor_attr->index;
+	struct w83791d_data *data = w83791d_update_device(dev);
+	return sprintf(buf, "%u\n", DIV_FROM_REG(data->fan_div[nr]));
+}
+
+/* Note: we save and restore the fan minimum here, because its value is
+   determined in part by the fan divisor.  This follows the principle of
+   least suprise; the user doesn't expect the fan minimum to change just
+   because the divisor changed. */
+static ssize_t store_fan_div(struct device *dev, struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83791d_data *data = i2c_get_clientdata(client);
+	int nr = sensor_attr->index;
+	unsigned long min;
+	u8 tmp_fan_div;
+	u8 fan_div_reg;
+	int indx = 0;
+	u8 keep_mask = 0;
+	u8 new_shift = 0;
+
+	/* Save fan_min */
+	min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr]));
+
+	mutex_lock(&data->update_lock);
+	data->fan_div[nr] = div_to_reg(nr, simple_strtoul(buf, NULL, 10));
+
+	switch (nr) {
+	case 0:
+		indx = 0;
+		keep_mask = 0xcf;
+		new_shift = 4;
+		break;
+	case 1:
+		indx = 0;
+		keep_mask = 0x3f;
+		new_shift = 6;
+		break;
+	case 2:
+		indx = 1;
+		keep_mask = 0x3f;
+		new_shift = 6;
+		break;
+	case 3:
+		indx = 2;
+		keep_mask = 0xf8;
+		new_shift = 0;
+		break;
+	case 4:
+		indx = 2;
+		keep_mask = 0x8f;
+		new_shift = 4;
+		break;
+#ifdef DEBUG
+	default:
+		dev_warn(dev, "store_fan_div: Unexpected nr seen: %d\n", nr);
+		count = -EINVAL;
+		goto err_exit;
+#endif
+	}
+
+	fan_div_reg = w83791d_read(client, W83791D_REG_FAN_DIV[indx])
+			& keep_mask;
+	tmp_fan_div = (data->fan_div[nr] << new_shift) & ~keep_mask;
+
+	w83791d_write(client, W83791D_REG_FAN_DIV[indx],
+				fan_div_reg | tmp_fan_div);
+
+	/* Restore fan_min */
+	data->fan_min[nr] = fan_to_reg(min, DIV_FROM_REG(data->fan_div[nr]));
+	w83791d_write(client, W83791D_REG_FAN_MIN[nr], data->fan_min[nr]);
+
+#ifdef DEBUG
+err_exit:
+#endif
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static struct sensor_device_attribute sda_fan_input[] = {
+	SENSOR_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0),
+	SENSOR_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1),
+	SENSOR_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2),
+	SENSOR_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3),
+	SENSOR_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4),
+};
+
+static struct sensor_device_attribute sda_fan_min[] = {
+	SENSOR_ATTR(fan1_min, S_IWUSR | S_IRUGO,
+			show_fan_min, store_fan_min, 0),
+	SENSOR_ATTR(fan2_min, S_IWUSR | S_IRUGO,
+			show_fan_min, store_fan_min, 1),
+	SENSOR_ATTR(fan3_min, S_IWUSR | S_IRUGO,
+			show_fan_min, store_fan_min, 2),
+	SENSOR_ATTR(fan4_min, S_IWUSR | S_IRUGO,
+			show_fan_min, store_fan_min, 3),
+	SENSOR_ATTR(fan5_min, S_IWUSR | S_IRUGO,
+			show_fan_min, store_fan_min, 4),
+};
+
+static struct sensor_device_attribute sda_fan_div[] = {
+	SENSOR_ATTR(fan1_div, S_IWUSR | S_IRUGO,
+			show_fan_div, store_fan_div, 0),
+	SENSOR_ATTR(fan2_div, S_IWUSR | S_IRUGO,
+			show_fan_div, store_fan_div, 1),
+	SENSOR_ATTR(fan3_div, S_IWUSR | S_IRUGO,
+			show_fan_div, store_fan_div, 2),
+	SENSOR_ATTR(fan4_div, S_IWUSR | S_IRUGO,
+			show_fan_div, store_fan_div, 3),
+	SENSOR_ATTR(fan5_div, S_IWUSR | S_IRUGO,
+			show_fan_div, store_fan_div, 4),
+};
+
+/* read/write the temperature1, includes measured value and limits */
+static ssize_t show_temp1(struct device *dev, struct device_attribute *devattr,
+				char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct w83791d_data *data = w83791d_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP1_FROM_REG(data->temp1[attr->index]));
+}
+
+static ssize_t store_temp1(struct device *dev, struct device_attribute *devattr,
+				const char *buf, size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83791d_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+	int nr = attr->index;
+
+	mutex_lock(&data->update_lock);
+	data->temp1[nr] = TEMP1_TO_REG(val);
+	w83791d_write(client, W83791D_REG_TEMP1[nr], data->temp1[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+/* read/write temperature2-3, includes measured value and limits */
+static ssize_t show_temp23(struct device *dev, struct device_attribute *devattr,
+				char *buf)
+{
+	struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
+	struct w83791d_data *data = w83791d_update_device(dev);
+	int nr = attr->nr;
+	int index = attr->index;
+	return sprintf(buf, "%d\n", TEMP23_FROM_REG(data->temp_add[nr][index]));
+}
+
+static ssize_t store_temp23(struct device *dev,
+				struct device_attribute *devattr,
+				const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83791d_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+	int nr = attr->nr;
+	int index = attr->index;
+
+	mutex_lock(&data->update_lock);
+	data->temp_add[nr][index] = TEMP23_TO_REG(val);
+	w83791d_write(client, W83791D_REG_TEMP_ADD[nr][index * 2],
+				data->temp_add[nr][index] >> 8);
+	w83791d_write(client, W83791D_REG_TEMP_ADD[nr][index * 2 + 1],
+				data->temp_add[nr][index] & 0x80);
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static struct sensor_device_attribute_2 sda_temp_input[] = {
+	SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp1, NULL, 0, 0),
+	SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp23, NULL, 0, 0),
+	SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp23, NULL, 1, 0),
+};
+
+static struct sensor_device_attribute_2 sda_temp_max[] = {
+	SENSOR_ATTR_2(temp1_max, S_IRUGO | S_IWUSR,
+			show_temp1, store_temp1, 0, 1),
+	SENSOR_ATTR_2(temp2_max, S_IRUGO | S_IWUSR,
+			show_temp23, store_temp23, 0, 1),
+	SENSOR_ATTR_2(temp3_max, S_IRUGO | S_IWUSR,
+			show_temp23, store_temp23, 1, 1),
+};
+
+static struct sensor_device_attribute_2 sda_temp_max_hyst[] = {
+	SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO | S_IWUSR,
+			show_temp1, store_temp1, 0, 2),
+	SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO | S_IWUSR,
+			show_temp23, store_temp23, 0, 2),
+	SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO | S_IWUSR,
+			show_temp23, store_temp23, 1, 2),
+};
+
+
+/* get reatime status of all sensors items: voltage, temp, fan */
+static ssize_t show_alarms_reg(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct w83791d_data *data = w83791d_update_device(dev);
+	return sprintf(buf, "%u\n", data->alarms);
+}
+
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
+
+/* Beep control */
+
+#define GLOBAL_BEEP_ENABLE_SHIFT	15
+#define GLOBAL_BEEP_ENABLE_MASK		(1 << GLOBAL_BEEP_ENABLE_SHIFT)
+
+static ssize_t show_beep_enable(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct w83791d_data *data = w83791d_update_device(dev);
+	return sprintf(buf, "%d\n", data->beep_enable);
+}
+
+static ssize_t show_beep_mask(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct w83791d_data *data = w83791d_update_device(dev);
+	return sprintf(buf, "%d\n", BEEP_MASK_FROM_REG(data->beep_mask));
+}
+
+
+static ssize_t store_beep_mask(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83791d_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+	int i;
+
+	mutex_lock(&data->update_lock);
+
+	/* The beep_enable state overrides any enabling request from
+	   the masks */
+	data->beep_mask = BEEP_MASK_TO_REG(val) & ~GLOBAL_BEEP_ENABLE_MASK;
+	data->beep_mask |= (data->beep_enable << GLOBAL_BEEP_ENABLE_SHIFT);
+
+	val = data->beep_mask;
+
+	for (i = 0; i < 3; i++) {
+		w83791d_write(client, W83791D_REG_BEEP_CTRL[i], (val & 0xff));
+		val >>= 8;
+	}
+
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t store_beep_enable(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83791d_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	mutex_lock(&data->update_lock);
+
+	data->beep_enable = val ? 1 : 0;
+
+	/* Keep the full mask value in sync with the current enable */
+	data->beep_mask &= ~GLOBAL_BEEP_ENABLE_MASK;
+	data->beep_mask |= (data->beep_enable << GLOBAL_BEEP_ENABLE_SHIFT);
+
+	/* The global control is in the second beep control register
+	   so only need to update that register */
+	val = (data->beep_mask >> 8) & 0xff;
+
+	w83791d_write(client, W83791D_REG_BEEP_CTRL[1], val);
+
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static struct sensor_device_attribute sda_beep_ctrl[] = {
+	SENSOR_ATTR(beep_enable, S_IRUGO | S_IWUSR,
+			show_beep_enable, store_beep_enable, 0),
+	SENSOR_ATTR(beep_mask, S_IRUGO | S_IWUSR,
+			show_beep_mask, store_beep_mask, 1)
+};
+
+/* cpu voltage regulation information */
+static ssize_t show_vid_reg(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct w83791d_data *data = w83791d_update_device(dev);
+	return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
+}
+
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
+
+static ssize_t show_vrm_reg(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct w83791d_data *data = w83791d_update_device(dev);
+	return sprintf(buf, "%d\n", data->vrm);
+}
+
+static ssize_t store_vrm_reg(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83791d_data *data = i2c_get_clientdata(client);
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	/* No lock needed as vrm is internal to the driver
+	   (not read from a chip register) and so is not
+	   updated in w83791d_update_device() */
+	data->vrm = val;
+
+	return count;
+}
+
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
+
+/* This function is called when:
+     * w83791d_driver is inserted (when this module is loaded), for each
+       available adapter
+     * when a new adapter is inserted (and w83791d_driver is still present) */
+static int w83791d_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_probe(adapter, &addr_data, w83791d_detect);
+}
+
+
+static int w83791d_create_subclient(struct i2c_adapter *adapter,
+				struct i2c_client *client, int addr,
+				struct i2c_client **sub_cli)
+{
+	int err;
+	struct i2c_client *sub_client;
+
+	(*sub_cli) = sub_client =
+			kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
+	if (!(sub_client)) {
+		return -ENOMEM;
+	}
+	sub_client->addr = 0x48 + addr;
+	i2c_set_clientdata(sub_client, NULL);
+	sub_client->adapter = adapter;
+	sub_client->driver = &w83791d_driver;
+	strlcpy(sub_client->name, "w83791d subclient", I2C_NAME_SIZE);
+	if ((err = i2c_attach_client(sub_client))) {
+		dev_err(&client->dev, "subclient registration "
+			"at address 0x%x failed\n", sub_client->addr);
+		kfree(sub_client);
+		return err;
+	}
+	return 0;
+}
+
+
+static int w83791d_detect_subclients(struct i2c_adapter *adapter, int address,
+				int kind, struct i2c_client *client)
+{
+	struct w83791d_data *data = i2c_get_clientdata(client);
+	int i, id, err;
+	u8 val;
+
+	id = i2c_adapter_id(adapter);
+	if (force_subclients[0] == id && force_subclients[1] == address) {
+		for (i = 2; i <= 3; i++) {
+			if (force_subclients[i] < 0x48 ||
+			    force_subclients[i] > 0x4f) {
+				dev_err(&client->dev,
+					"invalid subclient "
+					"address %d; must be 0x48-0x4f\n",
+					force_subclients[i]);
+				err = -ENODEV;
+				goto error_sc_0;
+			}
+		}
+		w83791d_write(client, W83791D_REG_I2C_SUBADDR,
+					(force_subclients[2] & 0x07) |
+					((force_subclients[3] & 0x07) << 4));
+	}
+
+	val = w83791d_read(client, W83791D_REG_I2C_SUBADDR);
+	if (!(val & 0x08)) {
+		err = w83791d_create_subclient(adapter, client,
+						val & 0x7, &data->lm75[0]);
+		if (err < 0)
+			goto error_sc_0;
+	}
+	if (!(val & 0x80)) {
+		if ((data->lm75[0] != NULL) &&
+				((val & 0x7) == ((val >> 4) & 0x7))) {
+			dev_err(&client->dev,
+				"duplicate addresses 0x%x, "
+				"use force_subclient\n",
+				data->lm75[0]->addr);
+			err = -ENODEV;
+			goto error_sc_1;
+		}
+		err = w83791d_create_subclient(adapter, client,
+					(val >> 4) & 0x7, &data->lm75[1]);
+		if (err < 0)
+			goto error_sc_1;
+	}
+
+	return 0;
+
+/* Undo inits in case of errors */
+
+error_sc_1:
+	if (data->lm75[0] != NULL) {
+		i2c_detach_client(data->lm75[0]);
+		kfree(data->lm75[0]);
+	}
+error_sc_0:
+	return err;
+}
+
+
+static int w83791d_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *client;
+	struct device *dev;
+	struct w83791d_data *data;
+	int i, val1, val2;
+	int err = 0;
+	const char *client_name = "";
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		goto error0;
+	}
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access w83791d_{read,write}_value. */
+	if (!(data = kzalloc(sizeof(struct w83791d_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto error0;
+	}
+
+	client = &data->client;
+	dev = &client->dev;
+	i2c_set_clientdata(client, data);
+	client->addr = address;
+	client->adapter = adapter;
+	client->driver = &w83791d_driver;
+	mutex_init(&data->update_lock);
+
+	/* Now, we do the remaining detection. */
+
+	/* The w83791d may be stuck in some other bank than bank 0. This may
+	   make reading other information impossible. Specify a force=...
+	   parameter, and the Winbond will be reset to the right bank. */
+	if (kind < 0) {
+		if (w83791d_read(client, W83791D_REG_CONFIG) & 0x80) {
+			dev_dbg(dev, "Detection failed at step 1\n");
+			goto error1;
+		}
+		val1 = w83791d_read(client, W83791D_REG_BANK);
+		val2 = w83791d_read(client, W83791D_REG_CHIPMAN);
+		/* Check for Winbond ID if in bank 0 */
+		if (!(val1 & 0x07)) {
+			/* yes it is Bank0 */
+			if (((!(val1 & 0x80)) && (val2 != 0xa3)) ||
+			    ((val1 & 0x80) && (val2 != 0x5c))) {
+				dev_dbg(dev, "Detection failed at step 2\n");
+				goto error1;
+			}
+		}
+		/* If Winbond chip, address of chip and W83791D_REG_I2C_ADDR
+		   should match */
+		if (w83791d_read(client, W83791D_REG_I2C_ADDR) != address) {
+			dev_dbg(dev, "Detection failed at step 3\n");
+			goto error1;
+		}
+	}
+
+	/* We either have a force parameter or we have reason to
+	   believe it is a Winbond chip. Either way, we want bank 0 and
+	   Vendor ID high byte */
+	val1 = w83791d_read(client, W83791D_REG_BANK) & 0x78;
+	w83791d_write(client, W83791D_REG_BANK, val1 | 0x80);
+
+	/* Verify it is a Winbond w83791d */
+	if (kind <= 0) {
+		/* get vendor ID */
+		val2 = w83791d_read(client, W83791D_REG_CHIPMAN);
+		if (val2 != 0x5c) {	/* the vendor is NOT Winbond */
+			dev_dbg(dev, "Detection failed at step 4\n");
+			goto error1;
+		}
+		val1 = w83791d_read(client, W83791D_REG_WCHIPID);
+		if (val1 == 0x71) {
+			kind = w83791d;
+		} else {
+			if (kind == 0)
+				dev_warn(dev,
+					"w83791d: Ignoring 'force' parameter "
+					"for unknown chip at adapter %d, "
+					"address 0x%02x\n",
+					i2c_adapter_id(adapter), address);
+			goto error1;
+		}
+	}
+
+	if (kind == w83791d) {
+		client_name = "w83791d";
+	} else {
+		dev_err(dev, "w83791d: Internal error: unknown kind (%d)?!?",
+			kind);
+		goto error1;
+	}
+
+#ifdef DEBUG
+	val1 = w83791d_read(client, W83791D_REG_DID_VID4);
+	dev_dbg(dev, "Device ID version: %d.%d (0x%02x)\n",
+			(val1 >> 5) & 0x07, (val1 >> 1) & 0x0f, val1);
+#endif
+
+	/* Fill in the remaining client fields and put into the global list */
+	strlcpy(client->name, client_name, I2C_NAME_SIZE);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(client)))
+		goto error1;
+
+	if ((err = w83791d_detect_subclients(adapter, address, kind, client)))
+		goto error2;
+
+	/* Initialize the chip */
+	w83791d_init_client(client);
+
+	/* If the fan_div is changed, make sure there is a rational
+	   fan_min in place */
+	for (i = 0; i < NUMBER_OF_FANIN; i++) {
+		data->fan_min[i] = w83791d_read(client, W83791D_REG_FAN_MIN[i]);
+	}
+
+	/* Register sysfs hooks */
+	data->class_dev = hwmon_device_register(dev);
+	if (IS_ERR(data->class_dev)) {
+		err = PTR_ERR(data->class_dev);
+		goto error3;
+	}
+
+	for (i = 0; i < NUMBER_OF_VIN; i++) {
+		device_create_file(dev, &sda_in_input[i].dev_attr);
+		device_create_file(dev, &sda_in_min[i].dev_attr);
+		device_create_file(dev, &sda_in_max[i].dev_attr);
+	}
+
+	for (i = 0; i < NUMBER_OF_FANIN; i++) {
+		device_create_file(dev, &sda_fan_input[i].dev_attr);
+		device_create_file(dev, &sda_fan_div[i].dev_attr);
+		device_create_file(dev, &sda_fan_min[i].dev_attr);
+	}
+
+	for (i = 0; i < NUMBER_OF_TEMPIN; i++) {
+		device_create_file(dev, &sda_temp_input[i].dev_attr);
+		device_create_file(dev, &sda_temp_max[i].dev_attr);
+		device_create_file(dev, &sda_temp_max_hyst[i].dev_attr);
+	}
+
+	device_create_file(dev, &dev_attr_alarms);
+
+	for (i = 0; i < ARRAY_SIZE(sda_beep_ctrl); i++) {
+		device_create_file(dev, &sda_beep_ctrl[i].dev_attr);
+	}
+
+	device_create_file(dev, &dev_attr_cpu0_vid);
+	device_create_file(dev, &dev_attr_vrm);
+
+	return 0;
+
+error3:
+	if (data->lm75[0] != NULL) {
+		i2c_detach_client(data->lm75[0]);
+		kfree(data->lm75[0]);
+	}
+	if (data->lm75[1] != NULL) {
+		i2c_detach_client(data->lm75[1]);
+		kfree(data->lm75[1]);
+	}
+error2:
+	i2c_detach_client(client);
+error1:
+	kfree(data);
+error0:
+	return err;
+}
+
+static int w83791d_detach_client(struct i2c_client *client)
+{
+	struct w83791d_data *data = i2c_get_clientdata(client);
+	int err;
+
+	/* main client */
+	if (data)
+		hwmon_device_unregister(data->class_dev);
+
+	if ((err = i2c_detach_client(client)))
+		return err;
+
+	/* main client */
+	if (data)
+		kfree(data);
+	/* subclient */
+	else
+		kfree(client);
+
+	return 0;
+}
+
+static void w83791d_init_client(struct i2c_client *client)
+{
+	struct w83791d_data *data = i2c_get_clientdata(client);
+	u8 tmp;
+	u8 old_beep;
+
+	/* The difference between reset and init is that reset
+	   does a hard reset of the chip via index 0x40, bit 7,
+	   but init simply forces certain registers to have "sane"
+	   values. The hope is that the BIOS has done the right
+	   thing (which is why the default is reset=0, init=0),
+	   but if not, reset is the hard hammer and init
+	   is the soft mallet both of which are trying to whack
+	   things into place...
+	   NOTE: The data sheet makes a distinction between
+	   "power on defaults" and "reset by MR". As far as I can tell,
+	   the hard reset puts everything into a power-on state so I'm
+	   not sure what "reset by MR" means or how it can happen.
+	   */
+	if (reset || init) {
+		/* keep some BIOS settings when we... */
+		old_beep = w83791d_read(client, W83791D_REG_BEEP_CONFIG);
+
+		if (reset) {
+			/* ... reset the chip and ... */
+			w83791d_write(client, W83791D_REG_CONFIG, 0x80);
+		}
+
+		/* ... disable power-on abnormal beep */
+		w83791d_write(client, W83791D_REG_BEEP_CONFIG, old_beep | 0x80);
+
+		/* disable the global beep (not done by hard reset) */
+		tmp = w83791d_read(client, W83791D_REG_BEEP_CTRL[1]);
+		w83791d_write(client, W83791D_REG_BEEP_CTRL[1], tmp & 0xef);
+
+		if (init) {
+			/* Make sure monitoring is turned on for add-ons */
+			tmp = w83791d_read(client, W83791D_REG_TEMP2_CONFIG);
+			if (tmp & 1) {
+				w83791d_write(client, W83791D_REG_TEMP2_CONFIG,
+					tmp & 0xfe);
+			}
+
+			tmp = w83791d_read(client, W83791D_REG_TEMP3_CONFIG);
+			if (tmp & 1) {
+				w83791d_write(client, W83791D_REG_TEMP3_CONFIG,
+					tmp & 0xfe);
+			}
+
+			/* Start monitoring */
+			tmp = w83791d_read(client, W83791D_REG_CONFIG) & 0xf7;
+			w83791d_write(client, W83791D_REG_CONFIG, tmp | 0x01);
+		}
+	}
+
+	data->vrm = vid_which_vrm();
+}
+
+static struct w83791d_data *w83791d_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83791d_data *data = i2c_get_clientdata(client);
+	int i, j;
+	u8 reg_array_tmp[3];
+
+	mutex_lock(&data->update_lock);
+
+	if (time_after(jiffies, data->last_updated + (HZ * 3))
+			|| !data->valid) {
+		dev_dbg(dev, "Starting w83791d device update\n");
+
+		/* Update the voltages measured value and limits */
+		for (i = 0; i < NUMBER_OF_VIN; i++) {
+			data->in[i] = w83791d_read(client,
+						W83791D_REG_IN[i]);
+			data->in_max[i] = w83791d_read(client,
+						W83791D_REG_IN_MAX[i]);
+			data->in_min[i] = w83791d_read(client,
+						W83791D_REG_IN_MIN[i]);
+		}
+
+		/* Update the fan counts and limits */
+		for (i = 0; i < NUMBER_OF_FANIN; i++) {
+			/* Update the Fan measured value and limits */
+			data->fan[i] = w83791d_read(client,
+						W83791D_REG_FAN[i]);
+			data->fan_min[i] = w83791d_read(client,
+						W83791D_REG_FAN_MIN[i]);
+		}
+
+		/* Update the fan divisor */
+		for (i = 0; i < 3; i++) {
+			reg_array_tmp[i] = w83791d_read(client,
+						W83791D_REG_FAN_DIV[i]);
+		}
+		data->fan_div[0] = (reg_array_tmp[0] >> 4) & 0x03;
+		data->fan_div[1] = (reg_array_tmp[0] >> 6) & 0x03;
+		data->fan_div[2] = (reg_array_tmp[1] >> 6) & 0x03;
+		data->fan_div[3] = reg_array_tmp[2] & 0x07;
+		data->fan_div[4] = (reg_array_tmp[2] >> 4) & 0x07;
+
+		/* Update the first temperature sensor */
+		for (i = 0; i < 3; i++) {
+			data->temp1[i] = w83791d_read(client,
+						W83791D_REG_TEMP1[i]);
+		}
+
+		/* Update the rest of the temperature sensors */
+		for (i = 0; i < 2; i++) {
+			for (j = 0; j < 3; j++) {
+				data->temp_add[i][j] =
+					(w83791d_read(client,
+					W83791D_REG_TEMP_ADD[i][j * 2]) << 8) |
+					w83791d_read(client,
+					W83791D_REG_TEMP_ADD[i][j * 2 + 1]);
+			}
+		}
+
+		/* Update the realtime status */
+		data->alarms =
+			w83791d_read(client, W83791D_REG_ALARM1) +
+			(w83791d_read(client, W83791D_REG_ALARM2) << 8) +
+			(w83791d_read(client, W83791D_REG_ALARM3) << 16);
+
+		/* Update the beep configuration information */
+		data->beep_mask =
+			w83791d_read(client, W83791D_REG_BEEP_CTRL[0]) +
+			(w83791d_read(client, W83791D_REG_BEEP_CTRL[1]) << 8) +
+			(w83791d_read(client, W83791D_REG_BEEP_CTRL[2]) << 16);
+
+		data->beep_enable =
+			(data->beep_mask >> GLOBAL_BEEP_ENABLE_SHIFT) & 0x01;
+
+		/* Update the cpu voltage information */
+		i = w83791d_read(client, W83791D_REG_VID_FANDIV);
+		data->vid = i & 0x0f;
+		data->vid |= (w83791d_read(client, W83791D_REG_DID_VID4) & 0x01)
+				<< 4;
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	mutex_unlock(&data->update_lock);
+
+#ifdef DEBUG
+	w83791d_print_debug(data, dev);
+#endif
+
+	return data;
+}
+
+#ifdef DEBUG
+static void w83791d_print_debug(struct w83791d_data *data, struct device *dev)
+{
+	int i = 0, j = 0;
+
+	dev_dbg(dev, "======Start of w83791d debug values======\n");
+	dev_dbg(dev, "%d set of Voltages: ===>\n", NUMBER_OF_VIN);
+	for (i = 0; i < NUMBER_OF_VIN; i++) {
+		dev_dbg(dev, "vin[%d] is:     0x%02x\n", i, data->in[i]);
+		dev_dbg(dev, "vin[%d] min is: 0x%02x\n", i, data->in_min[i]);
+		dev_dbg(dev, "vin[%d] max is: 0x%02x\n", i, data->in_max[i]);
+	}
+	dev_dbg(dev, "%d set of Fan Counts/Divisors: ===>\n", NUMBER_OF_FANIN);
+	for (i = 0; i < NUMBER_OF_FANIN; i++) {
+		dev_dbg(dev, "fan[%d] is:     0x%02x\n", i, data->fan[i]);
+		dev_dbg(dev, "fan[%d] min is: 0x%02x\n", i, data->fan_min[i]);
+		dev_dbg(dev, "fan_div[%d] is: 0x%02x\n", i, data->fan_div[i]);
+	}
+
+	/* temperature math is signed, but only print out the
+	   bits that matter */
+	dev_dbg(dev, "%d set of Temperatures: ===>\n", NUMBER_OF_TEMPIN);
+	for (i = 0; i < 3; i++) {
+		dev_dbg(dev, "temp1[%d] is: 0x%02x\n", i, (u8) data->temp1[i]);
+	}
+	for (i = 0; i < 2; i++) {
+		for (j = 0; j < 3; j++) {
+			dev_dbg(dev, "temp_add[%d][%d] is: 0x%04x\n", i, j,
+				(u16) data->temp_add[i][j]);
+		}
+	}
+
+	dev_dbg(dev, "Misc Information: ===>\n");
+	dev_dbg(dev, "alarm is:     0x%08x\n", data->alarms);
+	dev_dbg(dev, "beep_mask is: 0x%08x\n", data->beep_mask);
+	dev_dbg(dev, "beep_enable is: %d\n", data->beep_enable);
+	dev_dbg(dev, "vid is: 0x%02x\n", data->vid);
+	dev_dbg(dev, "vrm is: 0x%02x\n", data->vrm);
+	dev_dbg(dev, "=======End of w83791d debug values========\n");
+	dev_dbg(dev, "\n");
+}
+#endif
+
+static int __init sensors_w83791d_init(void)
+{
+	return i2c_add_driver(&w83791d_driver);
+}
+
+static void __exit sensors_w83791d_exit(void)
+{
+	i2c_del_driver(&w83791d_driver);
+}
+
+MODULE_AUTHOR("Charles Spirakis <bezaur@gmail.com>");
+MODULE_DESCRIPTION("W83791D driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_w83791d_init);
+module_exit(sensors_w83791d_exit);