blob: 459d2a52539355ab403f6f6dd1ec6319911b91ef [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/clock/nvidia,tegra20-car.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NVIDIA Tegra Clock and Reset Controller
maintainers:
- Jon Hunter <jonathanh@nvidia.com>
- Thierry Reding <thierry.reding@gmail.com>
description: |
The Clock and Reset (CAR) is the HW module responsible for muxing and gating
Tegra's clocks, and setting their rates. It comprises CLKGEN and RSTGEN units.
CLKGEN provides the registers to program the PLLs. It controls most of
the clock source programming and most of the clock dividers.
CLKGEN input signals include the external clock for the reference frequency
(12 MHz, 26 MHz) and the external clock for the Real Time Clock (32.768 KHz).
Outputs from CLKGEN are inputs clock of the h/w blocks in the Tegra system.
RSTGEN provides the registers needed to control resetting of each block in
the Tegra system.
properties:
compatible:
enum:
- nvidia,tegra20-car
- nvidia,tegra30-car
- nvidia,tegra114-car
- nvidia,tegra210-car
reg:
maxItems: 1
'#clock-cells':
const: 1
"#reset-cells":
const: 1
required:
- compatible
- reg
- '#clock-cells'
- "#reset-cells"
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/tegra20-car.h>
car: clock-controller@60006000 {
compatible = "nvidia,tegra20-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
};
usb-controller@c5004000 {
compatible = "nvidia,tegra20-ehci";
reg = <0xc5004000 0x4000>;
clocks = <&car TEGRA20_CLK_USB2>;
resets = <&car TEGRA20_CLK_USB2>;
};